MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specic requirements: MtronPTI 1-800-762-8800.
CMOS Compatible
Tri-State Feature for Auto Test Systems
Tape & Reel Packaging
±20ppm Available - Please Contact Factory
2553 N. Edgington Street, Franklin Park, IL 60131 yPhone: 847.451.1000 yFax: 847.451.7585
800-888-1499
or
www.champtech.com
1
MODEL CMO3
Frequency Range (MHz) 1.5 to 156.250
Frequency Stability (ppm)
Overall (Typical) Inclusive of calibration, temperature, voltage, load, shock,vibration, aging
0°C to 70°C ±25
-40°C to +85°C ±50
Temperature Range (°C)
Operating -40°C to +85°C
Storage -40°C to +125°C
Supply Voltage (V) +3.3 ±10%
Input Current (mA) 1.5MHz to 35MHz
Symmetry (%) CMOS 45/55
ELECTRICAL SPECIFICATIONS
Start up Time (ms) <10
PART NUMBERING GUIDE
CMO3XXXC - Specify Frequency
“Blank” = 0oC to 70oC Operating Temp.
“M” = -40oC to 85oC Operating Temp.
“A” = ±25ppm (-40oC to 85oC Excluding Aging)
“B” = ±50ppm
“C” = ±100ppm
“D” = ±20ppm Excluding Aging (Contact Factory)
“Blank” = Fixed Frequency
“E” = Tri-State
CMO3 Series
3.3V 5x7mm Surface Mount Crystal Clock Oscillators
<10
Rise Time (ns)
Fall Time (ns)
<5
<5
Load 15pF
Transistion Times
“0” Level (VOL)
“1” Level (VOH)
0.3
3.0
>35MHz to 50MHz >50MHz to 100MHz >100MHz to 156.25MHz
<15 <25 <30
1.5MHz to 50MHz >50MHz to 156.250MHz
<3
<3
THIS PRODUCT IS NOT RECOMMENDED FOR NEW DESIGNS.
PLEASE REFER TO THE M2 PRODUCT SERIES.
Revision: 03-01-07
CMO3 Series
5 x 7 mm, 3.3 Volt, CMOS, Clock Oscillator
ELECTRICAL SPECIFICATIONS
MODEL CMO3
Frequency Range (MHz) 1.5 to 156.250
Frequency Stability (ppm)
Overall (Typical) Inclusive of calibration, temperature, voltage, load, shock, vibration, aging
0ºC to 70ºC ±25
-40ºC to +85ºC ±50
Temperature Range (°C)
Operating -40°C to +85°C
Storage -40°C to +125°C
Supply Voltage (V) +3.3 ±10%
Input Current (mA) 1.5 MHz to 20 MHz >20 MHz to 50 MHz >50 MHz to 67 MHz >67 MHz to 156.25 MHz
<10 <20 <30 <55
Symmetry (%) CMOS 45/55
Transition Time
20% to 80% Vdd 1.5 MHz to 50 MHz >50 MHz to 156.250 MHz
Rise Time (ns) <5 <3
Fall Time (ns) <5 <3
Load 15pF
“0” Level (VOL) max 10% Vdd
“1” Level (VOH) min 90% Vdd
Start up Time (ms) <10
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specic requirements: MtronPTI 1-800-762-8800.
2553 N. Edgington Street, Franklin Park, IL 60131 yPhone: 847.451.1000 yFax: 847.451.7585
800-888-1499
or
www.champtech.com
2
OUTPUT WAVEFORM TEST CIRCUIT DIAGRAM
PIN FUNCTION
N/C / Tri-State1
2
3
Ground
Output
4+ VCC
CMO3 Series
3.3V 5x7mm Surface Mount Crystal Clock Oscillators
TEST METHODS REFERENCE PROCEDURES DESCRIPTION
Temperature Cycle MIL-STD-833, Mtd 1010, Cond. B
Mechanical Shock MIL-STD-883, Mtd 2002, Cond. B
-55°C to +125°C; Air-to-Air; 100 cycles; 10
min. dwell
Vibration MIL-STD 883, Mtd 2007, Cond. B 20-2000 Hz; 0.06 inch; 15g’s; 3 planes
Humidity Steady State MIL-STD-202, Mtd 103 40°C; 90%-95% R.H.; 56 days
Thermal Shock MIL-STD-883, Mtd 1011.7 Cond. B
Electrostatic Discharge
Solderability
Hermeticity
Resistance to Soldering
Lead Integrity
Marking Permanence
Life Test
100°C to 0°C; Water-to-Water; 15 cycles
2 KV to 4 KV Threshold
Solder dip; Meniscograph Criteria
Mass spectro. 2 x 10-8 atmos. CC/sec He
235°C; 30 seconds
Lead tension & bend stress
Resistance to solvents
1500 g’s
MIL-STD-883, Mtd 3015 Class II
MIL-STD-883, Mtd 1005.6
MIL-STD-883, Mtd 2022.2
MIL-STD-883, Mtd 1014.8, Cond. A1
MIL-STD-202, Mtd 210D, Cond. J
MIL-STD-883, Mtd 2004.5, Cond. A, B1
MIL-STD-883, Mtd 2015.8
125°C, powered, 1000 hours minimum
MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS
2553 N. Edgington Street, Franklin Park, IL 60131 yPhone: 847.451.1000 yFax: 847.451.7585
800-888-1499
or
www.champtech.com
2
OUTPUT WAVEFORM TEST CIRCUIT DIAGRAM
PIN FUNCTION
N/C / Tri-State1
2
3
Ground
Output
4+ VCC
CMO3 Series
3.3V 5x7mm Surface Mount Crystal Clock Oscillators
TEST METHODS REFERENCE PROCEDURES DESCRIPTION
Temperature Cycle MIL-STD-833, Mtd 1010, Cond. B
Mechanical Shock MIL-STD-883, Mtd 2002, Cond. B
-55°C to +125°C; Air-to-Air; 100 cycles; 10
min. dwell
Vibration MIL-STD 883, Mtd 2007, Cond. B 20-2000 Hz; 0.06 inch; 15g’s; 3 planes
Humidity Steady State MIL-STD-202, Mtd 103 40°C; 90%-95% R.H.; 56 days
Thermal Shock MIL-STD-883, Mtd 1011.7 Cond. B
Electrostatic Discharge
Solderability
Hermeticity
Resistance to Soldering
Lead Integrity
Marking Permanence
Life Test
100°C to 0°C; Water-to-Water; 15 cycles
2 KV to 4 KV Threshold
Solder dip; Meniscograph Criteria
Mass spectro. 2 x 10-8 atmos. CC/sec He
235°C; 30 seconds
Lead tension & bend stress
Resistance to solvents
1500 g’s
MIL-STD-883, Mtd 3015 Class II
MIL-STD-883, Mtd 1005.6
MIL-STD-883, Mtd 2022.2
MIL-STD-883, Mtd 1014.8, Cond. A1
MIL-STD-202, Mtd 210D, Cond. J
MIL-STD-883, Mtd 2004.5, Cond. A, B1
MIL-STD-883, Mtd 2015.8
125°C, powered, 1000 hours minimum
MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS
CMO3 Series
5 x 7 mm, 3.3 Volt, CMOS, Clock Oscillator
Revision: 03-01-07
THIS PRODUCT IS NOT RECOMMENDED FOR NEW DESIGNS.
PLEASE REFER TO THE M2 PRODUCT SERIES.
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specic requirements: MtronPTI 1-800-762-8800.
MtronPTI Lead Free Solder Prole
