MCC TM Micro Commercial Components 3EZ5.1D5 THRU 3EZ75D5 omponents 20736 Marilla Street Chatsworth !"# $ % !"# Features 3 W Glass Passivated Low Profile Package Glass Passivated Junction Excellent Clamping Capability Lead Free Finish/RoHS Compliant(Note C)("P" Suffix Designates Compliant. See Ordering Information) Junction Silicon Zener Diode 5.1-75 Volts Mechanical Data * * DO-15 WEIGHT: 0.015 ounce, 0.04 gram Marking : Cathode band and type number Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 D Maximum Ratings @ 25oC Unless Otherwise Specified Peak Pulse Power Dissipation (Note A) o Derate above 75 C A PD Peak Forward Surge Current 8.3ms single half sine-wave IFSM superimposed on rated load (JEDEC Method) (Note B) Operating And TJ , TSTG Storage Temperature Range 3 24 Cathode Mark Watts mW/ oC B D 15 Amps C o -55 C to +150o C DIMENSIONS NOTES: A. Mounted on 5.0mm2(.013mm thick) land areas. INCHES MM DIM B. Measured on 8.3ms, single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum. C.High Temperature Solder Exemption Applied, see EU Directive Annex 7. NOTE MIN MAX MIN MAX A 0.230 0.300 5.80 7.60 B 0.104 0.140 2.60 3.60 C 0.026 0.034 0.70 0.86 D 1.000 ----- 25.40 ----- www.mccsemi.com Revision: A 1 of 5 2011/01/01 MCC 3EZ5.1D5 THRU 3EZ75D5 TM Micro Commercial Components 0 ELECTRICAL CHARACTERISTICS (T A=25 C unless otherwise noted) VF=1.2 V max , IF=200 mA for all types Type No. (Note 1.) Nominal Zener Voltage Vz@IZT Volte (Note 2.) 3EZ5.1D5 3EZ5.6D5 3EZ6.2D5 3EZ6.8D5 3EZ7.5D5 3EZ8.2D5 3EZ9.1D5 3EZ10D5 3EZ11D5 3EZ12D5 3EZ13D5 3EZ14D5 3EZ15D5 3EZ16D5 3EZ17D5 3EZ18D5 3EZ19D5 3EZ20D5 3EZ22D5 3EZ24D5 3EZ27D5 3EZ28D5 3EZ30D5 3EZ33D5 3EZ36D5 3EZ39D5 3EZ43D5 3EZ47D5 3EZ51D5 3EZ56D5 3EZ62D5 3EZ68D5 3EZ75D5 Notes: 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 14 15 16 17 18 19 20 22 24 27 28 30 33 36 39 43 47 51 56 62 68 75 Test current IZT mA 147 134 121 110 100 91 82 75 68 63 58 53 50 47 44 42 40 37 34 31 28 27 25 23 21 19 17 16 15 13 12 11 10 Maximum Zener Impedance (Note 3) ZZT @ IZT ZZk @ IZK Ohms Ohms 3.5 2.5 1.5 2.0 2.0 2.3 2.5 3.5 4 4.5 4.5 5 5.5 5.5 6 6 7 7 8 9 10 12 16 20 22 28 33 38 45 50 55 70 85 550 600 700 700 700 700 700 700 700 700 700 700 700 700 750 750 750 750 750 750 750 750 1000 1000 1000 1000 1500 1500 1500 2000 2000 2000 2000 IZK mA 1.0 1.0 1.0 1.0 0.5 0.5 0.5 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 Leakage Current IR uA Max 5 5 5 5 5 5 3 3 1 1 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 VR Volts 1.0 2.0 3.0 4.0 5.0 6.0 7.0 7.6 8.4 9.4 9.9 10.6 11.4 12.2 13 13.7 14.4 15.2 16.7 18.2 20.6 21 22.5 25.1 27.4 29.7 32.7 35.6 38.8 42.6 47.1 51.7 56.0 Maximum Zener Current IZM mA 520 480 435 393 360 330 297 270 225 246 208 193 180 169 159 150 142 135 123 112 100 96 90 82 75 69 63 57 53 48 44 40 36 1. TOLERANCES - Suffix indicates 5% tolerance any other tolerance will be considered as a special device. 2. ZENER VOLTAGE (Vz) MEASUREMENT - guarantees the zener voltage when measured at 40 ms from the diode body, and an ambient temperature of 25 3.ZENER IMPEDANCE (Zz) DERIVATION - The zener impedance is derived from the 60 cycle ac voltage, which results when an ac current having an rms falue equal to 10% of the dc zener current (IZT or IZK)is superimposed on IZT or IZK)is . Revision: A www.mccsemi.com 2 of 5 2011/01/01 MCC RATING AND CHARACTERISTICS CURVES 3EZ5.1D5 THRU 3EZ75D5 TM Micro Commercial Components JL (t,D) TRANSIENT THERMAL RESISTANCE JUNCTION-TO-LEAD(/W) 30 D = 0.5 20 10 0.2 7 5 0.1 3 0.05 2 NOTE BELOW 0.1 SECOND, THERMAL RESPONSE CURVE IS APPLICABLE TO ANY LEAD LENGTH (L) 0.02 1 0.7 0.5 0.01 0.3 0.0001 D=0 0.0002 0.0005 0.001 0.002 0.005 0.01 0.02 0.05 SINGLE PULSE TJL = JL(t)PPK REPETITIVE PULSES TJL = JL(t,D)PPK 0.1 0.2 0.5 1 2 5 10 PPK, PEAK SURGE POWER(WATTS) Fig. 2-TYPICAL THERMAL RESPONSE L, IR, REVERSE LEADAGE(uAdc) @VR AS SPECIFIED IN ELEC. CHAR. TABLE 1K 500 RECTANGULAR NONREPETITIVE WAVEFORM TJ = 25 PRIOR TO INITIAL PULSE 300 200 100 50 30 20 10 .1 .2 .3 5 1 2 3 5 10 20 50 100 0.005 0.003 0.002 0.001 0.0005 0.0003 0.0002 0.0001 1 2 5 10 20 50 100 200 500 1K P.W. PULSE WIDTH (ms) NOMINAL VZ (VOLTS) Fig. 3-MAXIMUM SURGE POWER Fig. 4-TYPICAL REVERSE LEAKAGE 8 200 6 VZ, TEMPERATURE COEFFICIENT(mV) @ IZT VZ, TEMPERATURE COEFFICIENT(mV/) @ IZT 0.1 0.05 0.03 0.02 0.01 4 2 RANGE 0 -2 -4 3 4 6 8 10 12 100 RANGE 50 40 30 20 10 0 20 40 60 80 100 120 140 160 180 200 VZ, ZENER VOLTAGE @IZT (VOLTS) VZ, ZENER VOLTAGE @IZT (VOLTS) Fig. 5-UNITS TO 12 VOLTS Fig. 6-UNITS 10 TO 200 VOLTS www.mccsemi.com Revision: A 3 of 5 2011/01/01 MCC TM RATING AND CHARACTERISTICS CURVES Micro Commercial Components 3EZ5.1D5 THRU 3EZ75D5 100 IZ, ZENER CURRENT (mA) IZ, ZENER CURRENT (mA) 100 50 30 20 10 5 3 2 1 0.5 0.3 0.2 0.1 0 1 2 3 4 5 6 7 8 50 30 20 10 5 3 2 1 0.5 0.3 0.2 0.1 0 9 10 10 IZ, ZENER CURRENT (mA) 5 3 2 1 0.5 0.3 0.2 0.1 100 120 140 160 180 70 80 90 100 Fig. 8-VZ = 12 THRU 82 VOLTS .. JL, JUNCTION-LEAD THERMAL RESISTANCE (../W) Fig. 7-VZ = 3.9 THRU 10 VOLTS 50 30 20 10 50 60 VZ, ZENER VOLTAGE (VOLTS) VZ, ZENER VOLTAGE (VOLTS) 100 20 30 40 80 70 60 PRIMARY PATH OF CONDUCTION IS THROUGH THE CATHODE LEAD 50 40 30 20 10 0 0 200 1/8 1/4 3/8 1/2 5/8 3/4 7/8 1 VZ, ZENER VOLTAGE (VOLTS) L, LEAD LENGTH TO HEAT SINK (INCH) Fig. 9-VZ = 100 THRU 200 VOLTS Fig. 10-TYPICAL THERMAL RESISTANCE www.mccsemi.com Revision: A 4 of 5 2011/01/01 MCC TM Micro Commercial Components Ordering Information : Device Packing Part Number-TP Tape&Reel: 4Kpcs/Reel Part Number-AP Ammo Packing: 3Kpcs/Ammo Box Part Number-BP Bulk: 25Kpcs/Carton ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: A 5 of 5 2011/01/01