1N4001GP THRU 1N4007GP
1.0 AMP. Glass Passivated Junction Plastic Rectifiers
Voltage Range
50 to 1000 Volts
Current
1.0 Ampere
Features
a High temperature metallurgically bonded construction
a Plastic material used carries Underwriters Laboratory
Classification 94V-O
a Glass passivated cavity-free junction
a Capable of meeting environmental standards of
MIL-S-19500
a 1.0 ampere operation at TA=75oC and 55oC with no thermal
runaway
a Typical IR less than 0.1 uA
a High temperature soldering guaranteed:
350oC / 10 seconds, 0.375”(9.5mm) lead length, 5 lbs.
(2.3kg) tension
Mechanical Data
a Case: JEDEC DO-41 molded plastic over glass body
a Lead: Plated axial leads, solderable per MIL-STD-750,
Method 2026
a Polarity: Color band denotes cathode end
a Mounting position: Any
a
Weight: 0.012 ounce, 0.3 gram
DO-41
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number 1N
4001GP 1N
4002GP 1N
4003GP 1N
4004GP 1N
4005GP 1N
4006GP 1N
4007GP Units
Maximum Recurrent Peak Reverse Voltage 50 100 200 400 600 800 1000 V
Maximum RMS Voltage 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage 50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified Current
.375”(9.5mm) Lead Length @TA = 75 1.0 A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated Load
(JEDEC method ) 30 A
Maximum Instantaneous Forward Voltage
@1.0A 1.1 V
Maximum DC Reverse Current @ TA=25
at Rated DC Blocking Voltage @ TA=125 5.0
50 uA
uA
Maximum Full Load Reverse Current , Full
Cycle Average .375”(9.5mm) Lead Length
@TA=75
30
uA
Typical Junction Capacitance ( Note 1 ) 8.0 pF
Typical Thermal Resistance RJA ( Note 2 ) 55
/W
Operating and Storage Temperature Range
TJ ,TSTG -65 to +175
Notes: 1. Measured at 1 MHz and Applied Reverse Voltage of 4..0 Volts D.C.
2. Thermal Resistance from Junction to Ambient .375” (9.5mm) Lead Length.
.
RATINGS AND CHARACTERISTIC CURVES (1N4001GP THRU )1N4007GP
FIG.2- MAXIMUM NON-REPETITIVE PEAK FORWARD
SURGE CURRENT
PEAK FORWARD SURGE CURRENT. (A)
110
100
25
15
20
5
10
30
NUMBER OF CYCLES AT 60Hz
Tj=Tj max
8.3ms Single Half Sine Wave
JEDEC Method
FIG.4- TYPICAL REVERSE CHARACTERISTICS
INSTANTANEOUS REVERSE CURRENT.( A)
020 40 60 80 100 120 140
10
1
0.1
0.01
0.001
PERCENT OF RATED PEAK REVERSE VOLTAGE. (%)
Tj=25 C
0
Tj=125 C
0
Tj=75 C
0
FIG.3- TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS
INSTANTANEOUS FORWARD CURRENT. (A)
.4 .6 .8 1.0 1.2 1.4 1.6
0.01
1.0
10
0.1
FORWARD VOLTAGE. (V)
Tj=25 C
PULSE WIDTH-300 S
1% DUTY CYCLE
0
FIG.1- MAXIMUM FORWARD CURRENT DERATING
CURVE
AVERAGE FORWARD CURRENT. (A)
020 40 60 100 160 18014012080
0
0.4
0.2
0.6
0.8
1.0
AMBIENT TEMPERATURE. ( C)
o
SINGLE PHASE HALF WAVE 60Hz
RESISTIVE OR INDUCTIVE LOAD
0.375"(9.5m/m) LEAD LENGTH
FIG.5- TYPICAL JUNCTION CAPACITANCE
JUNCTION CAPACITANCE.(pF)
0.1 0.4 4.0 10
1.0 40 100
1
8
6
4
2
10
20
REVERSE VOLTAGE. (V)
Tj=25 C
f=1.0MHz
Vsig=50mVp-p
0