1N4001GP THRU 1N4007GP 1.0 AMP. Glass Passivated Junction Plastic Rectifiers Voltage Range 50 to 1000 Volts Current 1.0 Ampere DO-41 Features a a a a a a a High temperature metallurgically bonded construction Plastic material used carries Underwriters Laboratory Classification 94V-O Glass passivated cavity-free junction Capable of meeting environmental standards of MIL-S-19500 1.0 ampere operation at TA=75oC and 55oC with no thermal runaway Typical IR less than 0.1 uA High temperature soldering guaranteed: 350oC / 10 seconds, 0.375"(9.5mm) lead length, 5 lbs. (2.3kg) tension Mechanical Data a a a a Case: JEDEC DO-41 molded plastic over glass body Lead: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting position: Any aWeight: 0.012 ounce, 0.3 gram Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% 1N 1N 1N Type Number 1N 1N 1N 1N 4001GP 4002GP 4003GP 4004GP 4005GP 4006GP 4007GP Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current .375"(9.5mm) Lead Length @TA = 75 Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @1.0A Maximum DC Reverse Current @ TA=25 at Rated DC Blocking Voltage @ TA=125 Maximum Full Load Reverse Current , Full Cycle Average .375"(9.5mm) Lead Length @TA=75 Typical Junction Capacitance ( Note 1 ) Typical Thermal Resistance RJA ( Note 2 ) Operating and Storage Temperature Range TJ ,TSTG 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 1000 700 1000 V V V 1.0 A 30 A 1.1 V 5.0 50 uA uA 30 uA 8.0 55 -65 to +175 pF /W Notes: 1. Measured at 1 MHz and Applied Reverse Voltage of 4..0 Volts D.C. 2. Thermal Resistance from Junction to Ambient .375" (9.5mm) Lead Length. . 800 560 800 Units RATINGS AND CHARACTERISTIC CURVES (1N4001GP THRU 1N4007GP) 0.8 0.6 0.4 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0.375"(9.5m/m) LEAD LENGTH 0.2 0 FIG.2- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 30 PEAK FORWARD SURGE CURRENT. (A) AVERAGE FORWARD CURRENT. (A) 1.0 FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE 25 Tj=Tj max 8.3ms Single Half Sine Wave JEDEC Method 20 15 10 5 0 20 40 60 80 100 120 140 160 1 180 FIG.4- TYPICAL REVERSE CHARACTERISTICS FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT. ( A) 10 1.0 0.1 Tj=125 0C 1 Tj=75 0C 0.1 Tj=25 0C 0.01 0 Tj=25 C PULSE WIDTH-300 S 1% DUTY CYCLE 0.01 .4 .6 .8 1.0 1.2 1.4 1.6 0.001 0 FORWARD VOLTAGE. (V) 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) FIG.5- TYPICAL JUNCTION CAPACITANCE 20 JUNCTION CAPACITANCE.(pF) INSTANTANEOUS FORWARD CURRENT. (A) 10 100 10 NUMBER OF CYCLES AT 60Hz o AMBIENT TEMPERATURE. ( C) Tj=25 0C f=1.0MHz Vsig=50mVp-p 10 8 6 4 2 1 0.1 0.4 1.0 10 4.0 REVERSE VOLTAGE. (V) 40 100