4700 and 4800 series Momentary or alternate action pushbutton switches Distinctive features and specifications UG1006-A Butt action contacts UL, CSA and VDE (EN 61058-1) approved B ELECTRICAL SPECIFICATIONS * Max. current/voltage rating with resistive load : - silver contacts (A) : 3A 250VAC - 6A 125VAC - copper contacts (C) : 2A 250VAC - 4A 125VAC * Initial contact resistance : 10 m max. * Insulation resistance : 1.000 M min. at 500VDC * Dielectric strength : 2.000 Vrms 50 Hz min. between terminals 3.000 Vrms 50 Hz min. between terminals and frame * Electrical life : 10.000 cycles at full load MATERIALS GENERAL SPECIFICATIONS * Case : melamine-phenolic * Plunger : polyamide * Bushing : polyamide * Contacts : A : silver C : copper, silver plated * Torque : 0,95 Nm (.70 Ft.lb) max. applied to nut * Panel thickness : 5 mm (.196) max. between 2 nuts * Total travel : 4,5 mm (.177) +/- 0,5 (.019) * Operating temperature : -20C to +65C * Hand soldering : 270C max. for 10 seconds max. - Iron O 3 mm (.118) APPROVALS EN 61058-1 Models 4731A, 4736A, 4741A, 4746A are UL, CSA and VDE (EN 61058-1 approved. Models 4831A, 4836A, 4841A, 4846A are VDE (EN 61058-1) approved. Marking : to order switches marked UL/CSA, complete appropriate box of ordering format. VDE is standard marked. Dimensions : first dimensions are in mm while inches are shown as bracketted numbers. Sealing boots are available to protect the switches against dust and water. They are presented in section H. Mounting accessories : standard hardware supplied with all models : 1 hex nut U166 and 1 knurled nut U520 in the same colour as the plunger. They are presented in section I. Packaging unit : single pole models : 40 pieces - Double pole models : 20 pieces. B-172 www.apem.com APEM 4700 and 4800 series Momentary or alternate action pushbutton switches Solder lug/quick-connect or straight PC terminals Keyway * 1 and 2 pole configurations * Button returns in upper position after actuation. * Panel cut-out : O 12,2 (.480) 1.20 2 1 Funct. 6 (ON-ON) 2 6.20 (.244) 1 2.80x0.50 (.11x.019) Functions 1 and 3 4.70 (.185) 3.00 (.118) 3 8.20 (.322) 5.00 (.196) O1.40 (.055DIA) 7.20 (.283) 2.40 (.094) (.047) 1.20x0.5 (.047x.019) MODEL STRUCTURE B OFF ON MOM 7.30 (.287) 1 8.40 (.33) - 19.00 (.748) ON ON OFF 11.50 (.452) 4741 4746 4743 12.00 (.472) 15.00 (.59) 4731 4736 4733 12.50 (.492) Double pole 14 (.551) Single pole 7.30 (.287) O8.00 (.315DIA) O12.00x0.75 SI (.472DIAx0.75 IS) Keyway Solder lug/quick-connect terminals 2 5.80 (.228) 8.40 (.33) 2.80x0.50 (.11x.019) 5.80 (.228) 7.20 (.283) 7.20 (.283) 3 2.80x0.50 (.11x.019) 7.30 (.287) 5.80 (.228) 11.50 (.452) A1 A3 B4 A2 B5 B6 8.40 (.33) OFF ON MOM 21.00 (.826) - 23.00 (.905) ON ON OFF 8.00 (.314) 15.50 (.61) 4841 4846 4843 12.50 (.492) 4831 4836 4833 14.50 (.57) Double pole 16.50 (.649) 5.00 (.196) 5.00 (.196) Single pole 7.30 (.287) O8.00 (.315DIA) O12.00x0.75 SI (.472DIAx0.75 IS) Keyway Straight PC terminals 1.20x0.5 (.047x.019) Keyway OFF ON MOM 12.00 (.472) 8.20 (.322) 7.30 (.287) 3 2 0.80 (.031) - 7.70 (.303) ON ON OFF 19.00 (.748) 4731/8 4736/8 4733/8 14 (.551) 4.70 (.185) 12.50 (.492) O8.00 (.315DIA) Quick-connect terminals 4,7 x 0,8 (.185 x .031) 1.20x0.50 (.047x.019) APEM www.apem.com 7.70 (.303) 1 Available with silver contacts only. Minimum order : 1 000 pieces per type in one shipment. O12.00x0.75 SI (.472DIAx0.75 IS) B-173 4700 and 4800 series Momentary or alternate action pushbutton switches CONTACT MATERIALS A C Silver Copper, silver plated (not available on models with quick-connect terminals /8) ACTUATOR COLOURS B 01 02 03 05 06 07/1 09 Blue Black Green Yellow Red White Orange APPROVALS UU (UL-CSA) Availability : see specifications for details or approved models. Marking : to order switches marked UL-CSA, complete above box with "UU". VDE approval is standard marked. B-174 www.apem.com APEM