ED Series * DC output Solid State Relay in an Industry standard EMR plug in package * Ratings of 5 Amps * Load voltage range of 1-48 and 1-80 VDC * Fits standard DIN rail & PCB mountable sockets * LED input status indicator * AC or DC control * cUL Recognized, IEC Rated, CE & RoHS Compliant * Motor Controller Rated PRODUCT SELECTION Description 5A 5A ED06D5 ED06C5 ED06F5 ED06E5 ED06B5 ED10D5 ED10C5 ED10F5 ED10E5 ED10B5 Description 5A 5A Operating Voltage [VDC] (2) Maximum Load Current, UL 508 Resistive, [Adc] Maximum Load Current, IEC 60947-4-1 DC-1, DC-3 [Adc, FLA] Maximum Load Current UL 508 Motor Controller [FLA] (3) Minimum Load Current [Adc] Maximum Off-State Leakage Current @ Rated Voltage [A] Maximum On-State Voltage Drop @ Rated Current and 40C [Vdc] Maximum Surge Current (10ms) [Adc] Maximum PWM [Hz] (4) 1-48 5 5 2.0 0.1 20 0.3 60 500 1-80 5 5 2.0 0.1 20 0.3 60 500 5-15 VDC Control 18-32 VDC Control 48-72 VDC Control 18-36 VAC Control 90-140 VAC Control AVAILABLE OPTIONS OUTPUT SPECIFICATIONS AC Output (1) INPUT SPECIFICATIONS (1) Description EDxxD5 EDxxC5 EDxxF5 EDxxE5 EDxxB5 Control Voltage Range Minimum Turn-On Voltage Minimum Turn-Off Voltage Maximum Reverse Voltage Minimum Input Current [mA] Maximum Input Current [mA] Nominal Input Impedance [ohms] Maximum Turn-On Time [msec] Maximum Turn-Off Time [msec] 5-15 VDC 5 VDC 1.3 VDC 3 VDC 11 42.8 350 0.6 0.3 18-32 VDC 18 VDC 2 VDC 3 VDC 10.7 19.7 1.6K 0.6 0.3 48-72 VDC 48 VDC 4 VDC 3 VDC 10.8 16.3 4.4K 0.6 0.3 18-36 VAC 18 VAC 4 VAC N/A 12 25.3 1.5K 0.6 0.3 90-140 VAC 90 VAC 11 VAC N/A 7.3 10.9 12.5K 0.6 0.3 GENERAL SPECIFICATIONS (1) Description Parameters Dielectric Strength, Input/Output (50/60Hz) Minimum Insulation Resistance (@ 500 V DC) Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Weight (typical) Maximum Humidity Housing Material Terminals Material 2500 Vrms 109 Ohms 10 pF -30C to 80C -40C to 125C 0.71 oz. (30 g) 85% non-condensing PBT 30% GF, UL94 V-0 Copper w/Sulfamet Nickel finish GENERAL NOTES 1) All parameters at 25C unless otherwise specified. 2) Maximum Rated voltage for ED06xx is 60 VDC and 100 VDC for ED10xx 3) Maximum Motor Controller current is 1.5 FLA for EDxxB5 and EDxxE5 4) PWM does not apply to EDxxB5 and EDxxE5 MECHANICAL SPECIFICATIONS WIRING DIAGRAM THERMAL DERATE INFORMATION AGENCY APPROVALS IEC 61000-4-2 : Electrostatic Discharge IEC 61000-4-4 : Electrically Fast Transients IEC 61000-4-5 : Electrical Surges Level 1 - Criteria A Level 2 - Criteria B Level 3 - Criteria B E374474 Rev 050311 ACCESSORIES