RECTRON
SEMICONDUCTOR
FEATURES
MECHANICAL DATA
* Case: Molded plastic
* Epoxy: UL 94V-O rate flame retardant
* Lead: MIL-STD-202E method 208C guaranteed
* Mounting position: Any
* Weight: 0.008 gram
SOT-23
BCW68F
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25OC ambient temperature unless otherwise specified.
Single phase , half wave, 60HZ, resistive or inductive load.
For capacitive load, derate current by 20%.
0.118(3.00)
0.012(0.30)
0.020(0.50)
0.003(0.08)
0.006(0.15)
0.110(2.80)
0.019(2.00)
0.071(1.80)
0.100(2.55)
0.089(2.25)
0.020(0.50)
0.012(0.30)
0.043(1.10)
0.035(0.90)
0.004(0.10)
0.000(0.00)
TECHNICAL SPECIFICATION
SOT-23 BIPOLAR TRANSISTORS
TRANSISTOR(PNP)
2006-3
ELECTRICAL CHARACTERISTICS ( @ TA = 25OC unless otherwise noted )
CHARACTERISTICS SYMBOL UNITS
V
V
V
Marking DF
0.055(1.40)
0.047(1.20)
BASE
EMITTER
COLLECTOR
1
1
2
3
2
3
DC current gain (VCE= -10V, IC= -0.1mA)
DC current gain (VCE= -1V, IC= -10mA)
DC current gain (VCE= -1V, IC= -100mA)
DC current gain (VCE= -2V, IC= -500mA)
Collector cut-off current (VCB= -45V, IE=0)
Collector cut-off current (VEB= -4V, IC=0)
Transition frequency (VCE= -10V, IC= -20mA, f=100MHZ)
Output capacitance (VCB= -10V, IE= 0, f=1MHZ)
Input capacitance (VEB= -0.5V, IE= 0, f=1MHZ)
Collector-emitter saturation voltage (IC= -100mA, IB= -10mA)
Collector-emitter saturation voltage (IC= -500mA, IB= -50mA)
Base-emitter saturation voltage (IC= -100mA, IB= -10mA)
Base-emitter saturation voltage (IC= -500mA, IB= -50mA)
Noise figure (VCE= -5V, IE= -0.2mA, f=1kHz, Df=200Hz, RG=1KW)
-
-0.3
-0.7
-
-
-
-
MHz
-2
-
18
mA
mA
V
V
V
PF
PF
V
dB
Collector-base breakdown voltage (IC= -10mA, IE=0)
Collector-emitter breakdown voltage (IC= -10mA, IB=0)
Emitter-base breakdown voltage (IE= -10mA, IC=0)
V(BR)CBO
V(BR)CEO
V(BR)EBO
IEBO
hFE
ICBO
VCE(sat)
VBE(sat)
fT
Cib
Cob
NF
MAX
35
-
-
-
-
10
-
-0.02
-
-
-0.02
-
-
250
-
-
100
MIN
--1.25
80
-
-
-
-
-
TYP
-
-
-
-
-
-
-
-
-
-
-
-
-60
-45
-5
-
75
35
-
100
* Power dissipation
PCM : 0.33 W (Tamb=25OC)
* Collector current
ICM : -0.8 A
* Collector-base voltage
V(BR)CBO : -60 V
* Operating and storage junction temperature range
TJ,Tstg: -55OC to +150OC
Note 1: "Fully ROHS compliant", "100% Sn plating (Pb-free)".
RECTRON
Rectron Inc reserves the right to make changes without notice to any product
specification herein, to make corrections, modifications, enhancements or other
changes. Rectron Inc or anyone on its behalf assumes no responsibility or liabi-
lity for any errors or inaccuracies. Data sheet specifications and its information
contained are intended to provide a product description only. "Typical" paramet-
ers which may be included on RECTRON data sheets and/ or specifications ca-
n and do vary in different applications and actual performance may vary over ti-
me. Rectron Inc does not assume any liability arising out of the application or
use of any product or circuit.
Rectron products are not designed, intended or authorized for use in medical,
life-saving implant or other applications intended for life-sustaining or other rela-
ted applications where a failure or malfunction of component or circuitry may di-
rectly or indirectly cause injury or threaten a life without expressed written appr-
oval of Rectron Inc. Customers using or selling Rectron components for use in
such applications do so at their own risk and shall agree to fully indemnify Rect-
ron Inc and its subsidiaries harmless against all claims, damages and expendit-
ures.
DISCLAIMER NOTICE
