MP Motion Sensor (AMN1) MP MOTION SENSOR ` ' MOTION SENSOR (PASSIVE INFRARED TYPE) FEATURES 1. The world's smallest with a built-in amplifier (as of March 1998) Ultrasmall design--About 1/10 the volume and 1/5 the lens surface area of conventional motion detecting sensors. It can be installed in the smallest devices. Conventional type MP Motion sensor P Standard type Slight motion detection type NEW NEW Spot type 10 m detection type (Scheduled for launch (Scheduled for launch in July 1999) in July 1999) 2. Dual lens colors (white and black) are provided With an ultrasmall design and dual lens colors (white and black), it is inconspicuous, allowing the user to select either white or black to match the equipment color. This provides greater flexibility in equipment design. Conventional type 4. Detects even slight motion of a person With our sensor, even slight motions made by people will be detected easily. * Fine motion detection capability within approximately 2 meters of sensor. Standard type: Detects movement of approximately 30cm 11.811inch. Slight motion detection type: Detects movement of approximately 20cm 7.874inch. 5. Noise withstanding capability Circuitry is contained in a TO5 metal package, providing at least twice the noise withstanding capability as conventional type. * Comparison example of noise withstanding capability MP Motion sensor Conventional type MP Motion Sensor Distance at which motion sensor is not affected by cellular phone noise Min. 1 to 2m 3.281 to 6.562ft Min. 1 to 2cm .394 to .787inch APPLICATIONS What is passive infrared type? This sensor detects changes in infrared radiation which occur when there is movement by a person (or object) which is different in temperature from the surroundings. Q As this sensor detects temperature differences, it is well suited to detecting the motion of people by their body temperature. W Wide sensing area. 3. Built-in amplifier for easy use This sensor contains an amplifier circuit and a comparator circuit, and output through on/off switching. This enables connection directly to microcomputers. TO5 metal package (9.8mm x 9mm .386inch x .354inch dia.) Sensor Infrared radiation Infrared radiation Temperature difference Infrared radiation Movement ORDERING INFORMATION AMN AMN1: MP Motion Sensor Detection performance 1: Standard type 2: Slight motion detection type 3: Spot type (Scheduled for launch in July 1999) 4: 10m detection type (Scheduled for launch in July 1999) Operating voltage 1: 5V DC Lens color 1: Black 2: White 1 Amplifier circuit Multi lens Optical filter Feature 1: PC board mounting type Single-chip Stabilized IC power supply Quad type PIR element 1 Comparator output circuit 1. Home appliances Useful for saving energy in air conditioner, television, personal computer, or ventilator and air purifier 2. Amusement machine market Useful for saving energy and for automated guidance in theme parks and large video games 3. Equipment in service market Vdd Output Gnd Useful for automated guidance, automated announcements and energy saving in vending machines, ATMs, etc. 4. Lighting market Automated on/off controls, etc. for lamps, desk lamps, indoor lights, halls, stairway lights, etc. MP Motion Sensor (AMN1) PRODUCT TYPES Rated operating voltage Detection performance Ambient temperature Lens color Part No. Standard type -20 to +60C -4 to +140F (general use) Slight motion detection type -20 to +60C -4 to +140F Spot type -20 to +60C -4 to +140F 10m detection type -20 to +60C -4 to +140F Black White Black White Black White Black White AMN11111 AMN11112 AMN12111 AMN12112 AMN13111 AMN13112 AMN14111 AMN14112 3 to 6DC V Packing quantity Inner Outer 50 pcs. 1,000 pcs. PERFORMANCE 1. Detection performance Items Standard type Rated detection distance*Remark 1 Horizontal*Remark 2 Detection Vertical*Remark 2 range Detection zone*Remark 3 5m 16.404ft (Max.) 100 82 64 zones 2. Vertical Horizontal Slight motion detection type 2m 6.562ft (Max.) 91 91 104 zones Spot type 5m 16.404ft (Max.) 38 22 24 zones 10m detection type 10m 32.808ft (Max.) 110 93 80 zones Conditions of objects to be detected 1. Detectable difference in temperature between the target and background for the spot type is more than 31C 37.433.8F, and more than 51C 4133.8F for the 10m detection type 2. Movement speed * Standard type/Spot type: 0.3 to 2.0 m/s * Slight motion detection type/10m detection type: 0.3 to 1.0 m/s 3. Detection object = human body *Remarks1. Depending on the difference in temperature between the background and detection target and the speed at which the target moves, these sensors may be capable of detection beyond the detection distances stated above. Nevertheless, they should be used within the prescribed detection distances. For further details, refer to the detection range diagram on the following page. 3. Regarding of detection zone, please refer to "DETECTION PERFORMANCE" on the next page. Cut out 2. Rating (Measuring condition: ambient temp. = 25C 77F) (Common to All types) Items Power supply voltage Usable ambient temperature Storage temperature Specified value -0.3 to 7V DC -20 to 60C -4 to +140F -20 to 70C -4 to +158F Remarks No freezing and condensing at low temperature. 3. Electrical characteristics (Measuring condition: ambient temp. = 25C 77F; operating voltage = 5V) (Common to All types) Items Symbol Reted operating voltage Reted consumption current (Standby) *Remark Current Voltage Output Circuit stability time Minimum Typical Maximum Typical Maximum Maximum Maximum Typical Maximum Vdd Iw Iout Vout Twu Specified value 3.0V DC -- 6.0V DC 170A 300A 100A Vdd (Same as operating voltage) 7s 30s Measured conditions Iout = 0 Vout 7 Vdd-0.5 Remark: The current which is consumed during detection consists of the standby consumed current plus the output current. [Timing chart] ON Power supply OFF Detect Detection state Not detect ON Sensor output OFF Circuit stability time Remark: Circuit stability time: Max. 30s While the circuitry is stabilizing after the power is turned on, the sensor output is not fixed in the "on" state or "off" state. This is true regardless of whether or not the sensor has detected anything. Note: The spot and 10m detection types are subject to change without notice due to improvements in product performance, characteristics and dimensions. Please contact us with any inquiries you may have. 2 MP Motion Sensor (AMN1) DETECTION PERFORMANCE 1. Standard type TOP VIEW 5m 16.404ft SIDE VIEW 5m 16.404ft X 50 Y 41 2.5m 8.202ft 2.5m 8.202ft 0 0 2.5m 8.202ft 2.5m 8.202ft 41 50 5m 16.404ft 5m 16.404ft X-Y cross section Y 3m 9.843ft Detection zone 2 6.562 1 3.281 4m 3 13.123ft 9.843 2 6.562 1 3.281 1 3.281 2 6.562 1 3.281 (Max. 5.66m) (Max. 18.570ft) X 3 4m 9.843 13.123ft Remarks: 1. The X-Y cross-sectional diagram shows the detection area. 2. The differences in the detection zone patterns are indicative of the projections of the 16 lenses with single focal point and with five optical axes. An object whose temperature differs from the background temperature and which crosses inside the detection zone will be detected. 2 6.562 3m 9.843ft (Max. 7.42m) (Max. 24.344ft) X-Y cross section Y 2. Slight motion detection type 2.5m 8.202ft Y 2.5m 8.202ft 2 6.562 46 2 6.562 1.5 4.921 1.5 4.921 1 3.281 1 3.281 0.5 1.640 0.5 1.640 0 1m 3.281ft 2m 6.562ft 0 -2.5m -8.202ft -2 -1.5 -1 -0.5 -6.562 -4.921 -3.281 -1.640 -0.5 -1.640 -0.5 -1.640 -1 -3.281 -1 -3.281 -1.5 -4.921 -1.5 -4.921 -2 -6.562 -2 -6.562 -2.5m -8.202ft Detection zone 46 1m 3.281ft 2m 6.562ft 0.5 1 1.5 2 1.640 3.281 4.921 6.562 X 2.5m 8.202ft -2.5m -8.202ft (Max. 5m dia.) (Max. 16.404ft dia.) Remarks: 1. The X-Y cross-sectional diagram shows the detection area. 2. The differences in the detection zone patterns are indicative of the projections of the 26 lenses with single focal point and with five optical axes. An object whose temperature differs from the background temperature and which crosses inside the detection zone will be detected. Note: The spot and 10m detection types are subject to change without notice due to improvements in product performance, characteristics and dimensions. Please contact us with any inquiries you may have. 3 MP Motion Sensor (AMN1) 3. Spot type 2.5 8.202 X 2.5 8.202 1m 3.281ft 1.25 4.101 5m 16.404ft 2.5 8.202 0 0 19 2.5m 8.202ft 5m 16.404ft 2m 5.562ft 0.5 1.640 11 2.5 8.202 5m 16.404ft 0 1m 3.281ft 0.5 1.640 11 1.25 4.101 1.25 4.101 2.5m 8.202ft Y Y 19 1.25 4.101 0 X-Y cross section SIDE VIEW TOP VIEW 2m 5.562ft 0.5 1.640 X (Max. 1.4m) 1m (Max. 4.593ft) 3.281ft 0.5 1.640 1m 3.281ft 5m 16.404ft (Max. 2m) (Max. 6.562ft) 4. 10m detection type TOP VIEW 10m 32.808ft SIDE VIEW X 10m 32.808ft Y 46.5 5m 16.404ft 5m 16.404ft 5m 16.404ft 5m 16.404ft 55 10m 32.808ft 10m 32.808ft X-Y cross section Y (Max.15.9m 52.165ft) 6m 19.685ft 4 13.123 2 6.562 2 6 4 10m 8 32.808ft 26.247 19.685 13.123 6.562 X 10m 8 6 4 2 6.562 13.123 19.685 26.247 32.808ft 2 6.562 4 13.123 (Max.12.3m 40.354ft) 6m 19.685ft Note: The spot and 10m detection types are subject to change without notice due to improvements in product performance, characteristics and dimensions. Please contact us with any inquiries you may have. 4 MP Motion Sensor (AMN1) HOW TO USE 1. Wiring diagram Sensor 2. Timer circuit example Vdd Input voltage 10 + 5V REG + 0.1 47 + (5VDC) 0.1 Vdd 0.1 Load GND GND + Out 47k Iout: Max.100 A Relay Vdd: Input power source (DC) GND: GND Out: Output (Comparator) Connection to motion sensor 10k 10 0.1 + 3 2 16 1 9 10 13 11 The transistor turns on when the sensor detects something Out 0.1 R 74HC 15 123 C 8 Select a transistor to match the relay GND 14 Timer IC Timer time = RXC Note: This is the reference circuit which drives the MP motion sensor. Install a noise filter for applications requiring enhanced detection reliability and noise withstanding capability. Differences in the specifications of electronic components to which the units are connected sometimes affect their correct operation; please check the units' performance and reliability for each application. X direction 3. Installation Install the sensor so that people will be entering from the X or Y direction shown below. If persons approch the sensor from the Z direction, detection distance will be shortened. Y direction Z Z direction X direction mm inch General tolerance 0.5 .020 DIMENSIONS 1. Standard type Recommended PC board pattern (BOTTOM VIEW) 10+0.2 0 dia. .394 +.008 dia. 0 Sensing area Note 2) 9.5 dia. .374 dia. 11.0 .433 Notes 3) Note 1) 14.5 11 .571 .433 0.450.05 dia. .018.002 dia. 45 4.5 .177 45 11 dia. .433 dia. GND OUT P.C.D. 5.080.2 dia. .200.008 dia. Vdd 45 4 5 4 45 3.5 .138 ia. 0.1 d 5.08 .004 dia. 0 0 .2 3-0.6 +0 .1 3-.02 5+.0 dia. 6 0004 dia. Notes: 1. In order to ensure proper detection, install it with the lens exposed at least 3.5mm .138inch. 2. As for panel mounting hole, tapering or making a large size hole should be done. 3. The height dimension does not include the remaining molding gate. MP Motion Sensor (AMN) mm inch General tolerance 0.5 .020 2. Slight motion detection type Recommended PC board pattern (BOTTOM VIEW) 12.4 +0.2 0 dia. .488 +.008 dia. 0 12.7 dia. .500 dia. 11.9 dia. .469 dia. 7.4 dia. .291 dia. Note 3) 12.8 .504 8.9 .350 0.450.05 dia. .018.002 dia. 12.8 .504 15.2 .598 11 dia. .433 dia. 45 GND Vdd 4 4 45 3. Spot type Note 1) Notes: 1. In order to ensure proper detection, install it with the lens exposed at least 2.4mm .094inch. 2. As for panel mounting hole, tapering or making a large size hole should be done. 3. The height dimension does not include the remaining molding gate. P.C.D. 5.080.2 dia. .200.008 dia. 45 2.4 .094 ia. 0.1 d 5.08 .004 dia. 0 0 .2 3-0.6 +0 .1 3-.02 5+.0 dia. 6 0004 dia. 45 4.5 .177 OUT Sensing area Note 2) 4. 10m detection type Recommended PC board pattern (BOTTOM VIEW) Recommended PC board pattern (BOTTOM VIEW) 17.9 -0+0.2 dia. .705 +.008 dia. -0 Note 2) 9.4 +0.2 -0 dia. .370 +.008 -0 dia. 8.9 dia. .350 dia. Note 1) Note 2) 12.9 .508 17.4 dia. .685 dia. 17.0 dia. .670 dia. 45 0.05 Note 3) 45 15.1 .594 4.5 .177 GND 45 OUT 45 11 .433 18.53 .730 . 0.1 dia 4 5.08 .00 dia. 0 0 .2 3-0.6 +0.1 5 3-.02 +.-000 dia. 6 -0 4 dia. 8.6 .339 0.05 11 dia. .433 dia. 0.2 Vdd Note 1) OUT 45 4 Sensing area 4.5 .177 0.45 dia. .002 .018 dia. P.C.D. 5.08 dia. .008 .200 dia. 3-0.6 +0.1 5 3-.02 +.-000 dia. 6 -0 4 dia. 5.6 0.45 dia. .002 .018 dia. . 0.1 dia 4 5.08 .00 dia. .200 GND 4 0.2 45 P.C.D. 5.08 dia. .008 Notes: .200 dia. Vdd Notes: 1. As for panel mounting hole, tapering or making a large size hole should be done. 2. The height dimension does not include the remaining molding gate. 3. This type are subject to change without notice due to improvements in product performance, characteristics and dimensions. 45 4 4 45 1. In order to ensure proper detection, install it with the lens exposed at least 5.6mm .220inch. 2. As for panel mounting hole, tapering or making a large size hole should be done. 3. The height dimension does not include the remaining molding gate. 4. This type are subject to change without notice due to improvements in product performance, characteristics and NOTES 1. Checkpoints relating to principle of operation MP motion sensors are passive infrared sensors which detect changes in the infrared rays. They may fail to detect successfully if a heat source other than a human being is detected or if there are no temperature changes in or movement of a heat source. Care must generally be taken in the following cases. The performance and reliability of the sensors must be checked out under conditions of actual use. <1> Cases where a heat source other than a human being is detected. 1) When a small animal enters the detection range. 2) When the sensor is directly exposed to sunlight, a vehicle's headlights, an incandescent light or some other source of far infrared rays. 3) When the temperature inside the detection range has changed suddenly due to the entry of cold or warm air from an air-conditioning or heating unit, water vapor from a humidifier, etc. <2> Cases where it is difficult to detect the heat source 1) When an object made of glass, acrylic or other subject which far infrared rays have difficult passing through is located between the sensor and what is to be detected. 2) When the heat source inside the detection range hardly moves or when it moves at high speed; for details on the movement speed, refer to the section on the performance ratings. 2. Other handling cautions 1) Be careful not to allow dust or dirt to accumulate on the lens as this will adversely affect the detection sensitivity. 2) The lens is made of a soft material (polyethylene). Avoid applying a load or impact since this will deform or scratch the lens, making proper operation impossible and causing a deterioration in its performance. 3) The sensor may be damaged if it is exposed to static with a voltage exceeding 200V. Therefore, do not touch its terminals directly, and exercise adequate care in the handling of the sensor. 4) When the leads are to be soldered, solder them by hand for less than 3 seconds at a temperature of less than 350C 662F at the tip of the soldering iron. Avoid using a solder bath since this will causing a deterioration in the sensor's performance. 5) Do not attempt to clean the sensor. Cleaning fluid may enter inside the lens area causing a deterioration in performance. 6) When using the sensors with cables, it is recommended that cables which are shielded and as short as possible be used in order to safeguard against the effects of noise. 6 Global Network Services North America Europe Asia Pacific China Japan Aromat Corporation Matsushita Electric Works Matsushita Electric Works (Asia Pacific) Matsushita Electric Works Matsushita Electric Works, Ltd. Automation Controls Group Matsushita Electric Works Please contact our Sales Companies in: Europe Austria Benelux France Germany Ireland Italy Portugal Scandinavia Spain Switzerland United Kingdom Matsushita Electric Works Austria GmbH., Stojanstrae 12, A-2344 Maria Enzersdorf, Tel. (0 22 36) 2 68 46, Fax (0 22 36) 4 61 33, http://www.matsushita.at Matsushita Electric Works Benelux B.V., De Rijn 4, (Postbus 211), 5684 PJ Best, (5680 AE Best), Netherlands, Tel. (0 4 99) 37 27 27, Fax (0 4 99) 37 2185, http://www.matsushita.nl Matsushita Electric Works France S.A.R.L., B.P. 44, F-91371 Verrieres le Buisson CEDEX, Tel. 01 60 13 57 57, Fax 01 60 13 57 58, http://www.matsushita-france.fr Matsushita Electric Works Deutschland GmbH, Rudolf-Diesel-Ring 2, D-83 607 Holzkirchen, Tel. (0 80 24) 6 48-0, Fax (0 80 24) 6 48-5 55, http://www.matsushita.de Matsushita Electric Works UK Ltd., Irish Branch Office, Waverley, Old Naas Road, Bluebell, Dublin 12, Republic of Ireland, Tel: (01) 4600969, Fax: (01) 4601131 Matsushita Electric Works Italia s.r.l., Via del Commercio 3-5 (Z.I. Ferlina), I-37012 Bussolengo (VR), Tel. (045) 6 75 27 11, Fax (045) 6 70 04 44, http://www.matsushita.it Matsushita Electric Works, Portuguese Branch Office, Avda 25 de Abril, Edificio Alvorada 5 - E, 2750 Cascais, Portugal, Tel. 351 14 82 82 66, Fax 351 14 82 74 21 Matsushita Electric Works Scandinavia AB, Sjoangsvagen 10, 19272 Sollentuna, Sweden, Tel. (08) 594 766 80, Fax (08) 594 766 90 Matsushita Electric Works Espana S.A., Barajas Park, San Severo 20, E-28042 Madrid, Tel. (91) 329 3875, Fax (91) 329 2976 Matsushita Electric Works Schweiz AG, Grundstrasse 8, CH-6343 Rotkreuz, Tel. (041) 799 70 50, Fax (041) 799 70 55, http://www.matsushita.ch Matsushita Electric Works UK Ltd., Sunrise Parkway, Linford Wood East, Milton Keynes, MK14 6LF, England, Tel. (01908) 231555, Fax (019 08) 231599, http://www.matsushita.co.uk North & South America USA Aromat Corporation Head Office USA, 629 Central Avenue, New Providence, N.J. 07974, Tel. 1-908-464-3550, Fax 1-908-464-8513, http://www.aromat.com Asia Singapore China Hong Kong Japan Matsushita Electric Works Pte. Ltd. (Asia Pacific), 101 Thomson Road, #25-03/05, United Square, Singapore 307591, Tel. (65) 255-5473; Fax (65) 253-5689 Matsushita Electric Works, Ltd. China Office, 2013, Beijing Fortune, Building No. 5, Dong San Huan Bei Lu, Chaoyang District, Beijing, Tel. 86-10-6590-8646, Fax 86-10-6590-8647 Matsushita Electric Works Ltd. Hong Kong, Rm1601, 16/F, Tower 2, The Gateway, 25 Canton Road, Tsimshatsui, Kowloon, Hong Kong, Tel. (852) 2956-3118, Fax (852) 2956-0398 Matsushita Electric Works Ltd. Automation Controls Company, 1048 Kadoma, Kadoma-shi, Osaka 571-8686, Japan, Tel. 06-6908-1050; Fax 06-6908-5781, http://www.mew.co.jp/e-acg/ is a global brand name of Matsushita Electric Works Printed in Germany Copyright (c) 1999