www.element14.com
www.farnell.com
www.newark.com
Page <1> V1.025/02/13
High-Speed Double Diode
Features:
• Very Small Plastic SMD Package
• High Switching Speed : 4ns (Max.)
• Continuous Reverse Voltage : 75V (Max.)
• Repetitive Peak Reverse Voltage : 85V (Max.)
• Repetitive Peak Forward Current : 500mA (Max.)
Applications:
High-speed switching in e.g. surface mounted circuits
Max. Rating @ Ta = 25°C unless otherwise specied
Parameter Symbol Limits Unit
Peak repetitive reverse voltage Vrrm 85 V
Continuous reverse voltage Vr75 V
RMS reverse voltage Vr(rms)53 V
Forward continuous current (Max.) Single diode loaded
Both diodes loaded Ifm 150
75 mA
Repetitive peak forward current Ifrm 500 mA
Non-repetitive peak forward surge current
@t = 1μs
@t = 1ms
@t = 1s
Ifsm 4
1
0.5
A
Total power dissipation Ts = 90°C; one diode loaded Ptot 170 mW
Junction and storage temperature Tj, Tstg -65 to +150 °C
Electrical Characteristics @ Ta = 25°C unless otherwise specied
Parameter Symbol Conditions Min. Max. Unit
Leakage current Ir
Vr = 25V
Vr = 75V
Vr = 25V, Tj = 150°C
Vr = 75V, Tj = 150°C
-
30
2
60
100
nA
μA
μA
μA
Forward voltage Vf
If = 1mA
If = 10mA
If = 50mA
If = 150mA
-
0.715
0.855
1
1.25
V
Diode capacitance CdVr =0V, f=1MHz - 1.5 pF
Forward recovery voltage Vff If = 10mA, tr = 20ns - 1.75 V
Reverse recovery time trr If = Ir = 10mA,
Irr = 0.1 × Ir, Rl = 100Ω - 4 ns
www.element14.com
www.farnell.com
www.newark.com
Page <2> V1.025/02/13
High-Speed Double Diode
Typical Characteristics @ Ta = 25°C unless otherwise specied
www.element14.com
www.farnell.com
www.newark.com
Page <3> V1.025/02/13
High-Speed Double Diode
Plastic surface mounted package
www.element14.com
www.farnell.com
www.newark.com
Page <4> V1.025/02/13
High-Speed Double Diode
Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted
for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change
without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any
error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any
assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the
Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence.
Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012.
Part Number Table
Description Part Number
High-speed double Diode BAV70T-7-F
Package Information
Device Package Shipping
BAV70T-7-F SOT-523 3,000 / Tape & Reel
Soldering Footprint
