Featuring Radsok(R) Technology eco | mate rm (R) Rugged Metal Shielded Connectors RELIABLE SIGNAL AND POWER SOLUTIONS www.amphenol-sine.com | +1 800 394 7732 (c) 2015 Amphenol Sine Systems Corporation. Every effort has been made to ensure that the information contained in this document is accurate at the time of publication. Specifications or information stated in this document are subject to change without notice. www.amphenol-sine.com +1 800 394 7732 2 Global Interconnect Solution Supplier For over 80 years Amphenol has enjoyed success as the interconnection technology provider of choice to industry leading companies around the world. Our organization works with leading manufacturers across a wide range of applications - including Energy Generation & Distribution, Transportation, Heavy Equipment, Factory Automation, Wireless Outdoor, Information Technology and Data Communications Equipment, Mobile Devices, Mobile Networks, Broadband Communication, Military and Commercial Aerospace, Industrial, Automotive and Chip Card Readers - enabling smarter, faster and better technologies to connect products to customer solutions. ABOUT AMPHENOL We Are Amphenol Our engineers design innovative combinations of industry standard connectors and application specific shielding components to create assembly systems that set the standards for performance, reliability, and cost effectiveness. Our engineering, materials, and manufacturing organizations meet the high standards imposed by ISO 9001:2008 as well as many customer specific quality systems. Our performance has earned us ship to stock and world class performance awards from many major OEMs. We are one of the largest interconnect solution suppliers in the world and supply a wide range of product solutions globally. The industrial market footprint of Amphenol covers more than 30 countries. 3 eco | mate(R) rm Rugged Metal Shielded Connectors Table of Contents We Are Amphenol Global Interconnect Solution Supplier _________________________________________________________________ 3 Connector Guide Introduction to eco|mate(R) rm _______________________________________________________________________ 6 Typical Applications __________________________________________________________________________________ 7 Series Overview ______________________________________________________________________________________ 8 Connector Configurations ___________________________________________________________________________ 10 Insert Arrangements _________________________________________________________________________________ 12 General Technical Characteristics ___________________________________________________________________ 14 GuardSafeTM Locking Clips __________________________________________________________________________ 16 Connector Kits ______________________________________________________________________________________ 17 Connector Solutions 1 POSITION 86A / 630V ______________________________________________________________________________ 179 1 POSITION 120A / 630V _____________________________________________________________________________ 183 1 POSITION 120A - 180A / 630V ______________________________________________________________________ 187 1 POSITION 120A - 300A / 630V ______________________________________________________________________ 191 3 POSITIONS 13A / 300V ______________________________________________________________________________ 21 3 POSITIONS 86A / 630V _____________________________________________________________________________ 197 4 POSITIONS 13A / 300V ______________________________________________________________________________ 29 4 POSITIONS 23A / 350V ______________________________________________________________________________ 55 4 POSITIONS 45A / 500V ______________________________________________________________________________ 63 4 POSITIONS MIX 13A & 5A / 350V ____________________________________________________________________ 37 4 POSITIONS MIX 23A &13A / 350V ____________________________________________________________________ 47 6 POSITIONS 5A, 7.5A/ 150V __________________________________________________________________________ 71 8 POSITIONS 13A / 250V______________________________________________________________________________ 79 8 POSITIONS 13A / 300V______________________________________________________________________________ 87 8 POSITIONS 23A / 375V ______________________________________________________________________________ 95 9 POSITIONS MIX 23A & 13A / 250V __________________________________________________________________ 103 10 POSITIONS 5A, 7.5A / 150V _______________________________________________________________________ 111 12 POSITIONS 13A / 300V ____________________________________________________________________________ 119 19 POSITIONS 5A, 7.5A / 150V _______________________________________________________________________ 127 19 POSITIONS 13A / 300V ____________________________________________________________________________ 135 23 POSITIONS 13A / 300V ____________________________________________________________________________ 143 26 POSITIONS 5A, 7.5A / 150V _______________________________________________________________________ 151 28 POSITIONS 13A / 300V ____________________________________________________________________________ 159 32 POSITIONS 5A,7.5A / 150V ________________________________________________________________________ 167 48 POSITIONS 13A / 300V ____________________________________________________________________________ 175 Contacts Contact Overview _________________________________________________________________________________ 200 Plating and Bulk Order Options ______________________________________________________________________ 201 Stamped & Formed Crimped Contact Part Numbers_________________________________________________ 202 PCB Contacts ______________________________________________________________________________________ 204 PCB Contacts Dimensions __________________________________________________________________________ 206 Machined Standard Crimp Contact Part Numbers___________________________________________________ 207 RADSOK(R) Contacts ________________________________________________________________________________ 209 4 Tooling Machined _________________________________________________________________________________________ 212 Stamped & Formed ________________________________________________________________________________ 212 Contact Extraction Tool ____________________________________________________________________________ 212 Contact Extraction Tool Table _______________________________________________________________________ 213 Contact Extraction Tool Instruction __________________________________________________________________ 214 Assembly Instructions Table of Contents Table of Contents (con't) Jam Nut Assembly and Installation Instructions _______________________________________________________ 215 Flange Assembly and Installation Instructions ________________________________________________________ 216 eco|mate(R) rm Standard Product Straight Plug and Receptacle Cable Assembly _____________________ 217 eco|mate(R) rm Standard Product Straight Plug and Receptacle with End Cap ________________________ 219 eco|mate(R) rm Standard Product Right Angle Plug and Receptacle Cable Assembly __________________ 220 eco|mate(R) rm with RADSOK(R) Straight Plug Cable Assembly _________________________________________ 222 eco|mate(R) rm with RADSOK(R) Straight Plug - Shell Size 12 Cable Assembly ____________________________ 223 eco|mate(R) rm with RADSOK(R) 90 Plug Cable Assembly _____________________________________________ 224 Technical Data RADSOK(R) Product Overview ________________________________________________________________________ 226 RADSOK(R) Advantages and Custom Developed Solutions ____________________________________________ 227 RADSOK(R) Series Rated Current and Working Voltage _______________________________________________ 228 RADSOK(R) Series Dynamic Overload Tests at Different Temperatures __________________________________ 229 eco|mate(R) rm Rated Current and Working Voltage ________________________________________________ 230 UL94 + UL1977 Industry Standards ___________________________________________________________________ 231 IP Codes ___________________________________________________________________________________________ 232 Crimp Connection _________________________________________________________________________________ 233 Composition and Dimensions of Copper Wires _______________________________________________________ 234 Reduction Values __________________________________________________________________________________ 235 Voltage Grading of Connectors ____________________________________________________________________ 236 Creepage Distance ________________________________________________________________________________ 237 Appendix Glossary of Terms ___________________________________________________________________________________ 239 Part Number Index _________________________________________________________________________________ 241 5 Connector Guide Introduction to eco | mate(R) rm Quick Reliable Mating Bayonet Coupling With a quick twist of the bayonet coupling system, these connectors provide positive tactile feedback to insure confident mating. This feature also reduces time and labor during installation. Economical and Flexible Mixed Power & Signal Layouts Power and signal contacts can be combined in a variety of inserts providing a highly flexible interconnect solution to reduce system complexity and minimize installation costs. Waterproof IP67 Ideal for temporary submersion, (acheiving IP67) where water and dust protection are needed. Corrosion Resistant Salt Spray Standard Nickel 48 Hours, Black or Green Zinc 96 Hours Designed to withstand climate ingress and exposure to salt spray or a corrosive atmosphere while still maintaining mechanical and electrical functionality. Wide Ranging Contact System Flexible Contact Solutions Our contact system offers the flexibility of using a wide variety of contact styles and wire gauges within various connectors, shell sizes and insert layouts, providing customers with a total solution. 6 eco | mate(R) rm Connector Guides Rugged Metal Shielded Connectors Typical Applications Instrumentation Measurement Robotics - Machine Tools Building Automation & Control Telecom -Data Infrastructure Welding Medical Aerospace Energy - Power Military Automotive Off Road - Mining - Railway Electric Vehicles 7 eco|mate(R) rm Rugged Metal Shielded Connectors High Performance Cost Effective Rugged Metal Shielded Connectors Series Overview The eco|mate(R) rm series is the connector of choice wherever there are demanding interconnect architectures. The multiway connectors are available in 7 shell sizes and 25 insert arrangements with a variety of wire gauge options. It is the high performance, cost effective solution of choice for our customers. nickel plated aluminum outer shells and bayonet locking systems that require only a 1/3 turn. An audible locking "click" indicates proper installation. The series includes two kinds of connectors: Standard Products and High Amperage. Standard Products are widely used, standardized connectors, while the High Amperage connectors are designed to endure large currents and high voltage. Typically used within hybrid electric vehicles, High Amperage connectors are available in single pole, high power arrangements featuring RADSOK(R) technology. RADSOK(R) products are offered exclusively by Amphenol. Custom developed solutions are available in both styles. * Machined * Stamped & Formed * Power Oureco|mate(R) rmproductsare designed tobea competitivealternativeto other i n d u s t r y s t a n d a r d p r o d u c t s w h i l e maintaining the best possible mechanical and environmental quality on the market. Our eco|mate(R) rm products feature IP67 environmental sealing qualities, rugged 8 The versatility of having three available contact styles allows for a broad variety of insert arrangements. The eco|mate(R) rm Standard Product is our standard rugged metal shielded circular connector series available in 7 shell sizes and multiple insert arrangements. The high amperage eco|mate(R) rm with RADSOK(R) technology is our single pole power connector series ranging from 86A to 300A. eco|mate (R) rmindustrial grade circular connectorsaremanufacturedto be intermateable with other industry standard connectors. All connectors are RoHS compliant. The eco|mate(R) rm Series meets the standards of UL1977. The file number is E339831. eco|mate(R) rm Standard Products * Suitable For Indoor and Outdoor Applications * EMI/RMI Shielding Capability with Appropriate Backshell Connector Guide High Performance Cost Effective Rugged Metal Shielded Connectors * Operating Temperature: -40C to +105C Operating Temperature: -40C to +125C (for parts with a silicone seal, ending in 03) * 500 Mating Cycles * Contacts and Cord Grips Ordered Separately eco|mate(R) rm Standard Products starting on page 21 * High-Density Contact Arrangements Available * UL ECBT2 Certified High Amperage eco|mate(R) rm with RADSOK(R) Technology * Single Pole High Power Arrangements * 3.6mm-10mm Contact Sizes * Operating Temperature: -40C to +125C * RoHS Compliant * 4 Shell Sizes * Operating Voltage: 630V eco|mate(R) rm High Amperage Products starting on page 179 * Current Rating at 25C: 86A-300A * Flammability Rating: UL94-V0 * High Reliability * Low Contact Engagement / Separation Forces * Low Contact Resistance * High Mating Cycle Durability 9 eco | mate(R) rm Rugged Metal Shielded Connectors Connector Configurations End Cap for Individual Wire Sealing Short Cable Gland Choice of Contacts * Machined * Stamped and Formed Long Cable Gland Right Angle Cable Gland Overmolded eco|mate(R) rm Series Custom Solutions Available For: * * * * * * * * Various Applications Extreme Environments Reducing the Number of Suppliers Molded Strain Relief Minimize Stress on Conductors 360 Shielding Available Custom Logo Enhanced Sealing Properties Contact the Factory to learn more 10 Plug Kit includes Connector, Backshell and Contacts Plug Connector Guides Connector Guide Connector Solutions: see page 19 for parts grouped by insert arrangement Receptacle Choices Choice of Contacts * Machined * Stamped and Formed End Cap for Individual Wire Sealing Wall Mounted Faceview Jam Nut eco|mate(R) rm Series Receptacle Kit includes Receptacle, Gasket & Contacts 11 eco | mate(R) rm Rugged Metal Shielded Connectors Insert Arrangements RT0 Shell Size 10 Contact #16 (O 1.6) Mixed Power & Signal Contact 2.5mm 4 positions Contact #16 (O 1.6) 13A 300V see page 29 4 positions Contact #16 (O 1.6) & #20 (O 1.0) 13A & 20# 5A 350V AC/DC see page 37 Consult factory Consult factory Consult factory 12 3 positions Contact #16 (O 1.6) 13A 300V see page 21 14 8 positions Contact #16 (O 1.6) 13A 300V see page 79 Consult factory 8 positions Contact #16 (O 1.6) 13A 300V AC/DC page 87 12 positions Contact #16 (O 1.6) 13A 300V see page 119 4 positions Contact 2.5mm #16 (O 1.6) 23A &13A 350V AC/DC see page 47 Consult factory 4 positions Contact 2.5mm 23A 350V AC/DC see page 55 Contact #20 (O 1.0) Single Pin Power RADSOK(R) 6 positions Contact #20 (O 1.0) 5A, 7A(machined) 150V see page 71 Consult factory 10 positions Contact #20 (O 1.0) 5A, 7.5A(machined) 150V see page 111 1 position Contact 3.6mm 86A 630V AC/DC see page 179 19 positions Contact #20 (O 1.0) 5A, 7.5A(machined) 150V see page 127 1 position Contact 6mm 120A 630V AC/DC see page 183 26 positions Contact #20 (O 1.0) 5A, 7.5A(machined) 150V see page 151 1 position Contact 8mm 120A - 180A 630V AC/DC see page 187 Consult factory 16 19 positions Contact # 16 (O 1.6) 13A 300V see page 135 12 RTHP 4 positions Contact #8 (O 3.6) 45A 500V AC/DC see page 63 9 positions Contact 2.5mm & # 16 (O 1.6) 23A & 13A 350V AC/DC see page 103 RT0 Shell Size Contact #16 (O 1.6) 18 Mixed Power & Signal RTHP Contact 2.5mm Contact #20 (O 1.0) or Contact 3.6mm Single Pin Power RADSOK(R) Consult factory 23 positions Contact #16 (O 1.6) 13A 300V see page 143 Connector Guides Connector Guide Consult factory 8 positions Contact 2.5mm 23A 375V AC/DC see page 95 32 positions Contact #20 (O 1.0) 5A, 7.5A 150V see page 167 RTHP 20 Consult factory Consult factory 28 positions Contact #16 (O 1.6) 13A 300V see page 159 24 Consult factory Consult factory 3 positions Contact 3.6mm 86A 630V see page 197 1 position Contact 10mm 120A - 300A 630V see page 191 Consult factory Consult factory 48 positions Contact #16 (O 1.6) 13A 300V see page 177 Insert Arrangements are Pin Faceview 13 eco | mate(R) rm Rugged Metal Shielded Connectors General Technical Characteristics Materials * Zinc Alloy Shells * Metal Alloy Backshells and Cable Glands * Aluminum Alloy, Nickel Plated Coupling Ring * Stainless Steel Coupling Spring * Contacts Plating Options Gold Flash over Tin Tin Silver 5, 10, 15, 30 Gold Flash Other platings on request * Insulation Resistance 5000 megohms minimum of 25 C * Insulation Inserts Thermoplastic, UL94 V-0 14 Environmental * IP67 * Operating Temperature -40 to 105 C - Standard Products with NBR Seal -40 to 125 C -Standard Products with Silicone Seal -40 to 125 C -High Amperage Products with RADSOK(R) technology * Flammability Rating UL94 V-0 * Salt Spray Per MIL-STD-202 method 101 -48 h ( standard version) -96 h (black anodized coupling ring) Higher salt spray resistance (200/500h) upon request * Sealing In mated condition and in combination with sealed backshell * Fluid Resistance Gas, oil, mineral oil, acid bath, basic bath Connector Guides Connector Guide Electrical Mechanical * In Accordance With UL 1977: Certificate ECBT2 File number: E339831 * Durability RT Series : >500 mating cycles RTHP Series: >100 mating cycles * More information see "Technical Section" starting on page 228 * Vibration 10-2000 Hz, level of 20 G's * Thermal Shock No cracking, chipping or leaking after 20 test cycles from -55C to 125C * Contact Resistance #16 <6 m #20 <15 m eco|mate(R) rm with RADSOK(R) < 1m 15 Connector Guide GuardSafeTM Locking Clips Amphenol's GuardSafeTM Locking Clips are designed to complement the eco|mate (R) rm multi-way connector and Amphenol PT\26482 Series cylindrical metal bayonet coupling systems, and are suitable for many rough, harsh environmental applications. Featuring non-corrosive, plastic construction with clamshell functionality, they are resistant to brake and transmission fluid, oils, grease, salt, dirt and other contaminants. Compliant with new FM standards, the GuardSafeTM Locking Clip offers an extra layer of protection from an inadvertent uncoupling of the connector. Cost Effective Safety Protection GuardSafeTM Locking Clips render quick disconnections not "normally arching" by eliminating access to the coupling nut and requiring a tool for removal. Easy to Use User-friendly, easy to install and service. Suitability GuardSafeTM Locking Clips are suitable to be used with wiring methods in accordance with Class I, Division 2 wiring practices per the National Electric Code (NEC), ANSI,\NFPA 70, Article 501.4(B). Installation: Locate the clip over the connector coupling nut with the lanyard towards the plug adapter as shown. Close the safety clip. Removal: Locate a screwdriver on first latch as shown. Push down the latch then twist the screwdriver. Repeat actions for second latch. eco|mate(R) rm Locking Clips are also Compatible with Amphenol PT\26482 Series Cylindrical Metal Bayonet Coupling Systems! Go to www.amphenol-sine.com for more information about the PT Series GuardSafeTM Locking Clips 16 Shell Size Part # 10 108039110 12 108039112 14 108039114 16 108039116 18 108039118 20 108039120 22 108039122 24 108039124 Connector Guide Connector Guides Connector Kits Q: Why are we offering "kits"? A: Making "kits" available to our customers allows for reducing the number of part numbers necessary for any given project, whether for in-house production or field serviceable applications. Amphenol's eco|mate (R) rm Rugged Metal Shielded Connector Kits offer mated multiway connector parts available in 6 shell sizes and 12 insert arrangements, with a variety of wire gauge options. eco|mate (R) rm industrial circular connectors are designed to be intermateable with other industry standard connectors. All connectors are RoHS compliant. Market Applications: * Instrumentation Measurement * Robotics * Machine Tools * Building Automation & Control * Telecom - Data Infrastructure * Welding * Medical * Aerospace * Energy Power * Military * Automotive * Off Road * Mining * Railway * Electric Vehicles Plug Kit Including Connector, Backshell & Contacts Square Flange Receptacle Kit Including Receptacle, Gasket & Contacts Jam Nut Receptacle Kit Including Receptacle & Contacts eco|mate(R) rm Kits * 6 shell sizes/12 insert configurations * Insert arrangements from 4-32 contacts * Operating voltage of 150V or 300V * Current rating: 5A, 7.5A(machined) or 13A (signal contacts) * Alternate keying positions available * Plastic inserts with flammability rating of UL94-V0 17 18 eco | mate(R) rm Connector Solutions Eco|mate(R) rmTM Connector Solutions eco|mate(R) rm Standard Products 3 POSITIONS 13A / 300V ______________________________________________________________________________ 21 4 POSITIONS 13A / 300V ______________________________________________________________________________ 29 4 POSITIONS MIX 13A & 5A / 350V ____________________________________________________________________ 37 4 POSITIONS MIX 23A &13A / 350V ____________________________________________________________________ 47 4 POSITIONS 23A / 350V ______________________________________________________________________________ 55 4 POSITIONS 45A / 500V ______________________________________________________________________________ 63 6 POSITIONS 5A / 150V _______________________________________________________________________________ 71 8 POSITIONS 13A / 250V ______________________________________________________________________________ 79 8 POSITIONS 13A / 300V _____________________________________________________________________________ 87 8 POSITIONS 23A / 375V ______________________________________________________________________________ 95 9 POSITIONS MIX 23A & 13A / 250V __________________________________________________________________ 103 10 POSITIONS 5A, 7.5A/ 150V ________________________________________________________________________ 111 12 POSITIONS 13A / 300V ____________________________________________________________________________ 119 19 POSITIONS 5A, 7.5A/ 150V ________________________________________________________________________ 127 19 POSITIONS 13A / 300V ____________________________________________________________________________ 135 23 POSITIONS 13A / 300V ____________________________________________________________________________ 143 26 POSITIONS 5A, 7.5A / 150V _______________________________________________________________________ 151 28 POSITIONS 13A / 300V ____________________________________________________________________________ 159 32 POSITIONS 5A, 7.5A / 150V _______________________________________________________________________ 167 48 POSITIONS 13A / 300V ____________________________________________________________________________ 175 Connector Solutions Rugged Metal Shielded Connectors High Amperage eco|mate(R) rm with RADSOK(R) Technology 1 POSITION 86A / 630V ______________________________________________________________________________ 179 1 POSITION 120A / 630V _____________________________________________________________________________ 183 1 POSITION 120A - 180A / 630V ______________________________________________________________________ 187 1 POSITION 120A - 300A / 630V ______________________________________________________________________ 191 3 POSITIONS 86A / 630V _____________________________________________________________________________ 197 19 STEP 1 Choose Receptacle Style STEP 2 Choose Plug Style STEP 2 Choose Backshell Style Jam Nut Receptacles RT07123PNH RT0S12CGNS1 RT07123SNH SEE TABLE ON NEXT PAGE FOR PART DETAILS Plug RT0S12CGNS2 RT07123PNHEC RT06123PNH RT0L12CGNS1 RT06123SNH RT0L12CGNS2 RT06123PNHEC RT0B12CGNS1 RT06123SNHEC RT0B12CGNS2 RT07123SNHEC OR Square Flange Receptacles RT00123PNH RT00123SNH OR RT00123PNHEC RT00123SNHEC 20 Square Flange Receptacle Kit Including Receptacle,Gasket & Contacts Plug Kit Including Connector, Backshell & Contacts CONTACTS SOLD SEPARATELY SEE PAGE 26 Backshell Jam Nut Receptacle Kit Including Receptacle & Contacts 3 POSITIONS 13A / 300V Number of Contacts: 3 Salt Spray: 48h Contact Size: 16 Connector Solutions Shell Size: 12 Sealing: IP67 eco|mate(R) rm Standard Products * Suitable For Indoor and Outdoor Applications * EMI/RMI Shielding Capability with Appropriate Backshell * Operating Temperature: -40C to +105C * 500 Mating Cycles * Contacts and Cord Grips Ordered Separately * UL ECBT2 Certified* An upgraded silicone seal is available for all connector parts. Please add "03" to the end of the part number when ordering. Operating Temperature: -40C to +125C. Not available in kits. Insert Arrangement Pin (Male) Faceview Connector Part Numbers Part Number Figure Drawings Connector Type Male Female Jam Nut Receptacle 1,5 2,5 RT07123SNHEC Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal** 3,5 4,5 RT07123PNHK RT07123SNHK Jam Nut Receptacle Kit 1,5 2,5 RT06123PNH RT06123SNH Plug 6 7 RT06123PNHEC RT06123SNHEC Plug with O-ring Seal and End Cap with Individual Rear Wire Seal** 8 9 RT06123PNHK RT06123SNHK Plug Kit 6 7 RT00123PNH RT00123SNH Square Flange Receptacle 10,14 11,14 RT00123PNHEC RT00123SNHEC Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal** 12,14 13,14 RT00123PNHK RT00123SNHK Square Flange Receptacle Kit 10,14 11,14 Male Female RT07123PNH RT07123SNH RT07123PNHEC Backshells Contacts supplied separately see page 26 **See page 23 for the real seal wire range Part Number Backshell Type Cable Range (mm) Figure Drawings Shielding RT0S12CGNS1 Short Cord Grip (straight) 6-10.5 15 RT0S12CGNS2 Short Cord Grip (straight) 8.5-12.5 15 RT0L12CGNS1 Long Cord Grip (straight) 6-10.5 16 RT0L12CGNS2 Long Cord Grip (straight) 8.5-12.5 16 RT0B12CGNS1 Cord Grip (90) 6-10.5 17 RT0B12CGNS2 Cord Grip (90) 8.0-12.5 17 *Connector parts with part numbers ending in EC (with an end cap) were not available for submittal at the time of UL certification. 21 Shell Size: 12 Sealing: IP67 Number of Contacts: 3 Salt Spray: 48h Contact Size: 16 Dimensions Jam Nut Receptacle Jam Nut Receptacle Male Figure 1 Jam Nut Receptacle RT07123PNH Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 3 RT07123PNHEC Jam Nut Receptacle Panel Cutout Figure 5 22 Female Figure 2 RT07123SNH Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 4 RT07123SNHEC 3 POSITIONS 13A / 300V Number of Contacts: 3 Salt Spray: 48h Contact Size: 16 Connector Solutions Shell Size: 12 Sealing: IP67 Dimensions Plug Plug Male Figure 6 Plug RT06123PNH Female Plug with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 8 Figure 7 RT06123SNH Plug with O-ring Seal and End Cap with Individual Rear Wire Seal RT06123PNHEC Female Figure 9 RT06123SNHEC Individual Sealing Wire Range Contact Size Insulation Overall Diameter (min-max) Wire Range 16 O2.0mm - O3.2mm 14 - 24 AWG 23 Shell Size: 12 Sealing: IP67 Number of Contacts: 3 Salt Spray: 48h Contact Size: 16 Dimensions Square Flange Receptacle Square Flange Receptacle Male Figure 10 Square Flange Receptacle RT00123PNH Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 12 RT00123PNHEC Square Flange Receptacle Panel Cutout Figure 14 24 Female Figure 11 RT00123SNH Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 13 RT00123SNHEC 3 POSITIONS 13A / 300V Number of Contacts: 3 Salt Spray: 48h Contact Size: 16 Connector Solutions Shell Size: 12 Sealing: IP67 Dimensions Backshell Short Cord Grip (straight) Figure 15 Long Cord Grip (straight) Figure 16 Cord Grip (90) Figure 17 Accessories Locking Clip with Lanyard Plug Dustcap with Chain Plug Dustcap without Chain Receptacle Dustcap with Chain NEW! See Page 16 108039112 RT612DCG RT612DC RT012DCG Receptacle Dustcap with Nylon Cord, Made of Rubber Receptacle Dustcap without Chain Receptacle Dustcap without Nylon Cord, Rubber Material Sealing Plug RT012RL RT012DC RB00011912 CA401659 Square Flange Receptacle Gaskets, Thickness 0.8mm (0.2) RTFD12B 25 Shell Size: 12 Sealing: IP67 Number of Contacts: 3 Salt Spray: 48h Contact Size: 16 Contacts Machined Contacts Crimp Contacts, Machined Part Number 26 AWG Tools Wire Range Plating Male Female MP14M23F MS14M23F 14 2.0-2.5 Gold Flash MP14M23G5 MS14M23G5 14 2.0-2.5 Gold 5" MP14M23G10 MS14M23G10 14 2.0-2.5 Gold 10" MP14M23G15 MS14M23G15 14 2.0-2.5 Gold 15" MP14M23G30 MS14M23G30 14 2.0-2.5 Gold 30" MP16M23F MS16M23F 18-16 .75-1.5 Gold Flash MP16M23G5 MS16M23G5 18-16 .75-1.5 Gold 5" MP16M23G10 MS16M23G10 18-16 .75-1.5 Gold 10" MP16M23G15 MS16M23G15 18-16 .75-1.5 Gold 15" MP16M23G30 MS16M23G30 18-16 .75-1.5 Gold 30" MP20M23F MS20M23F 22-20 .34-.50 Gold Flash MP20M23G5 MS20M23G5 22-20 .34-.50 Gold 5" MP20M23G10 MS20M23G10 22-20 .34-.50 Gold 10" MP20M23G15 MS20M23G15 22-20 .34-.50 Gold 15" MP20M23G30 MS20M23G30 22-20 .34-.50 Gold 30" MP24M23F MS24M23F 26-24 .14-.25 Gold Flash MP24M23G5 MS24M23G5 26-24 .14-.25 Gold 5" MP24M23G10 MS24M23G10 26-24 .14-.25 Gold 10" MP24M23G15 MS24M23G15 26-24 .14-.25 Gold 15" MP24M23G30 MS24M23G30 26-24 .14-.25 Gold 30" Contact Extraction Tool, #16 (O 1.6) Contact (mm) QXRT16 Hand Crimp Tool for Machined Contacts MFX-3959 Pneumatic Crimp Tool for Machined Contacts MFX-3960 3 POSITIONS 13A / 300V Number of Contacts: 3 Salt Spray: 48h Contact Size: 16 Connector Solutions Shell Size: 12 Sealing: IP67 Contacts (con't) Stamped & Formed Contacts Crimp Contacts, Stamped & Formed Part Number Tools Wire Range Plating 14 2.0-2.5 Gold Flash SS14M1G5 14 2.0-2.5 Gold 5" SP14M1G10 SS14M1G10 14 2.0-2.5 Gold 10" SP14M1G15 SS14M1G15 14 2.0-2.5 Gold 15" SP14M1G30 SS14M1G30 14 2.0-2.5 Gold 30" SP16M1F SS16M1F 18-16 .75-1.5 Gold Flash SP16M1G5 SS16M1G5 18-16 .75-1.5 Gold 5" SP16M1G10 SS16M1G10 18-16 .75-1.5 Gold 10" SP16M1G15 SS16M1G15 18-16 .75-1.5 Gold 15" SP16M1G30 SS16M1G30 18-16 .75-1.5 Gold 30" SP20M1F SS20M1F 22-20 .34-.50 Gold Flash SP20M1G5 SS20M1G5 22-20 .34-.50 Gold 5" SP20M1G10 SS20M1G10 22-20 .34-.50 Gold 10" SP20M1G15 SS20M1G15 22-20 .34-.50 Gold 15" SP20M1G30 SS20M1G30 22-20 .34-.50 Gold 30" SP24M1F SS24M1F 22-20 .14-.25 Gold Flash SP24M1G5 SS24M1G5 26-24 .14-.25 Gold 5" SP24M1G10 SS24M1G10 26-24 .14-.25 Gold 10" SP24M1G15 SS24M1G15 26-24 .14-.25 Gold 15" SP24M1G30 SS24M1G30 26-24 .14-.25 Gold 30" Male Female SP14M1F SS14M1F SP14M1G5 AWG Contact Extraction Tool, #16 (O 1.6) Contact (mm) QXRT16 Hand Tool, Stamped & Formed Contact, Size 16, 20-14AWG MFX-3954 Crimp Die for Stamped & Formed Contact MFX-3957 27 STEP 1 Choose Receptacle Style STEP 2 Choose Plug Style STEP 2 Choose Backshell Style Jam Nut Receptacles RT07104PNH Backshell RT07104SNH SEE TABLE ON NEXT PAGE FOR PART DETAILS Plug RT0S10CGNS1 RT07104PNHEC RT06104PNH RT0S10CGNS2 RT07104SNHEC OR Square Flange Receptacles RT06104SNH RT0L10CGNS1 RT06104PNHEC RT00104PNH RT0L10CGNS2 RT06104SNHEC RT00104SNH OR RT00104PNHEC RT00104SNHEC 28 Square Flange Receptacle Kit Including Receptacle,Gasket & Contacts Plug Kit Including Connector, Backshell & Contacts CONTACTS SOLD SEPARATELY SEE PAGE 34 Jam Nut Receptacle Kit Including Receptacle & Contacts 4 POSITIONS 13A / 300V Number of Contacts: 4 Salt Spray: 48h Contact Size: 16 Connector Solutions Shell Size: 10 Sealing: IP67 eco|mate(R) rm Standard Products * Suitable For Indoor and Outdoor Applications * EMI/RMI Shielding Capability with Appropriate Backshell * Operating Temperature: -40C to +105C * 500 Mating Cycles * Contacts and Cord Grips Ordered Separately * UL ECBT2 Certified* An upgraded silicone seal is available for all connector parts. Please add "03" to the end of the part number when ordering. Operating Temperature: -40C to +125C. Not available in kits. Insert Arrangement Pin (Male) Faceview Connector Part Numbers Part Number Figure Drawings Connector Type Male Female Jam Nut Receptacle 1,5 2,5 RT07104SNHEC Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal** 3,5 4,5 RT07104PNHK RT07104SNHK Jam Nut Receptacle Kit 1,5 2,5 RT06104PNH RT06104SNH Plug 6 7 RT06104PNHEC RT06104SNHEC Plug with O-ring Seal and End Cap with Individual Rear Wire Seal** 8 9 RT06104PNHK RT06104SNHK Plug Kit 6 7 RT00104PNH RT00104SNH Square Flange Receptacle 10,14 11,14 RT00104PNHEC RT00104SNHEC Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal** 12,14 13,14 RT00104PNHK RT00104SNHK Square Flange Receptacle Kit 10,14 11,14 Male Female RT07104PNH RT07104SNH RT07104PNHEC Contacts supplied separately see page 34 **See page 31 for the real seal wire range Backshells Part Number Backshell Type Cable Range (mm) Figure Drawings Shielding RT0S10CGNS1 Short Cord Grip (straight) 3-6.5 15 RT0S10CGNS2 Short Cord Grip (straight) 5-8.5 15 RT0L10CGNS1 Long Cord Grip (straight) 3-6.5 16 RT0L10CGNS2 Long Cord Grip (straight) 5-8.5 16 *Connector parts with part numbers ending in EC (with an end cap) were not available for submittal at the time of UL certification. 29 Shell Size: 10 Sealing: IP67 Number of Contacts: 4 Salt Spray: 48h Contact Size: 16 Dimensions Jam Nut Receptacle Jam Nut Receptacle Male Figure 1 Jam Nut Receptacle RT07104PNH Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 3 RT07104PNHEC Jam Nut Receptacle Panel Cutout Figure 5 30 Female Figure 2 RT07104SNH Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 4 RT07104SNHEC 4 POSITIONS 13A / 300V Number of Contacts: 4 Salt Spray: 48h Contact Size: 16 Connector Solutions Shell Size: 10 Sealing: IP67 Dimensions Plug Plug Male Figure 6 Plug RT06104PNH Female Plug with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 8 RT06104PNHEC Figure 7 RT06104SNH Plug with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 9 RT06104SNHEC Individual Sealing Wire Range Contact Size Insulation Overall Diameter (min-max) Wire Range 16 O2.0mm - O3.2mm 14 - 24 AWG 31 Shell Size: 10 Sealing: IP67 Number of Contacts: 4 Salt Spray: 48h Contact Size: 16 Dimensions Square Flange Receptacle Square Flange Receptacle Male Figure 10 Square Flange Receptacle RT00104PNH Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 12 RT00104PNHEC Square Flange Receptacle Panel Cutout Figure 14 32 Female Figure 11 RT00104SNH Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 13 RT00104SNHEC 4 POSITIONS 13A / 300V Number of Contacts: 4 Salt Spray: 48h Contact Size: 16 Connector Solutions Shell Size: 10 Sealing: IP67 Dimensions Backshell Short Cord Grip (straight) Figure 15 Long Cord Grip (straight) Figure 16 Accessories Plug Dustcap with Chain Plug Dustcap without Chain Receptacle Dustcap without Chain 108039110 RT610DCG RT610DC RT010DC Receptacle Dustcap with Chain Receptacle Dustcap without Nylon Cord, Rubber Material Receptacle Dustcap with Nylon Cord, Made of Rubber Sealing Plug RT010DCG RB00011910 RT010RL Locking Clip with Lanyard NEW! See Page 16 CA401659 Square Flange Receptacle Gaskets, Thickness 0.8mm (0.2) RTFD10B 33 Shell Size: 10 Sealing: IP67 Number of Contacts: 4 Salt Spray: 48h Contact Size: 16 Contacts Machined Contacts Tools Crimp Contacts, Machined Part Number 34 AWG Wire Range Plating Male Female MP14M23F MS14M23F 14 2.0-2.5 Gold Flash MP14M23G5 MS14M23G5 14 2.0-2.5 Gold 5" MP14M23G10 MS14M23G10 14 2.0-2.5 Gold 10" MP14M23G15 MS14M23G15 14 2.0-2.5 Gold 15" MP14M23G30 MS14M23G30 14 2.0-2.5 Gold 30" MP16M23F MS16M23F 18-16 .75-1.5 Gold Flash MP16M23G5 MS16M23G5 18-16 .75-1.5 Gold 5" MP16M23G10 MS16M23G10 18-16 .75-1.5 Gold 10" MP16M23G15 MS16M23G15 18-16 .75-1.5 Gold 15" MP16M23G30 MS16M23G30 18-16 .75-1.5 Gold 30" MP20M23F MS20M23F 22-20 .34-.50 Gold Flash MP20M23G5 MS20M23G5 22-20 .34-.50 Gold 5" MP20M23G10 MS20M23G10 22-20 .34-.50 Gold 10" MP20M23G15 MS20M23G15 22-20 .34-.50 Gold 15" MP20M23G30 MS20M23G30 22-20 .34-.50 Gold 30" MP24M23F MS24M23F 26-24 .14-.25 Gold Flash MP24M23G5 MS24M23G5 26-24 .14-.25 Gold 5" MP24M23G10 MS24M23G10 26-24 .14-.25 Gold 10" MP24M23G15 MS24M23G15 26-24 .14-.25 Gold 15" MP24M23G30 MS24M23G30 26-24 .14-.25 Gold 30" Contact Extraction Tool, #16 (O 1.6) Contact (mm) QXRT16 Hand Crimp Tool for Machined Contacts MFX-3959 Pneumatic Crimp Tool for Machined Contact MFX-3960 4 POSITIONS 13A / 300V Number of Contacts: 4 Salt Spray: 48h Contact Size: 16 Connector Solutions Shell Size: 10 Sealing: IP67 Contacts (con't) Stamped & Formed Contacts Tools Crimp Contacts, Stamped & Formed Part Number AWG Wire Range Plating Male Female SP14M1F SS14M1F 14 2.0-2.5 Gold Flash SP14M1G5 SS14M1G5 14 2.0-2.5 Gold 5" SP14M1G10 SS14M1G10 14 2.0-2.5 Gold 10" SP14M1G15 SS14M1G15 14 2.0-2.5 Gold 15" SP14M1G30 SS14M1G30 14 2.0-2.5 Gold 30" SP16M1F SS16M1F 18-16 .75-1.5 Gold Flash SP16M1G5 SS16M1G5 18-16 .75-1.5 Gold 5" SP16M1G10 SS16M1G10 18-16 .75-1.5 Gold 10" SP16M1G15 SS16M1G15 18-16 .75-1.5 Gold 15" SP16M1G30 SS16M1G30 18-16 .75-1.5 Gold 30" SP20M1F SS20M1F 22-20 .34-.50 Gold Flash SP20M1G5 SS20M1G5 22-20 .34-.50 Gold 5" SP20M1G10 SS20M1G10 22-20 .34-.50 Gold 10" SP20M1G15 SS20M1G15 22-20 .34-.50 Gold 15" SP20M1G30 SS20M1G30 22-20 .34-.50 Gold 30" SP24M1F SS24M1F 22-20 .14-.25 Gold Flash SP24M1G5 SS24M1G5 26-24 .14-.25 Gold 5" SP24M1G10 SS24M1G10 26-24 .14-.25 Gold 10" SP24M1G15 SS24M1G15 26-24 .14-.25 Gold 15" SP24M1G30 SS24M1G30 26-24 .14-.25 Gold 30" Contact Extraction Tool, #16 (O 1.6) Contact (mm) QXRT16 Hand Tool, Stamped & Formed Contact, Size 16, 20-14AWG MFX-3954 Crimp Die for Stamped & Formed Contact MFX-3957 35 STEP 1 Choose Receptacle Style STEP 2 Choose Plug Style STEP 2 Choose Backshell Style Jam Nut Receptacles Backshell RT07102SNH SEE TABLE ON NEXT PAGE FOR PART DETAILS Plug RT0S10CGNS1 RT07102PNHEC RT06102PNH RT07102SNHEC RT0S10CGNS2 OR Square Flange Receptacles RT06102SNH RT0L10CGNS1 RT06102PNHEC RT00102PNH RT06102SNHEC RT0L10CGNS2 RT00102SNH OR RT00102PNHEC RT00102SNHEC 36 Square Flange Receptacle Kit Including Receptacle,Gasket & Contacts Plug Kit Including Connector, Backshell & Contacts CONTACTS SOLD SEPARATELY SEE PAGE 42 RT07102PNH Jam Nut Receptacle Kit Including Receptacle & Contacts 4 POSITIONS MIX 13A & 5A / 350V Number of Contacts: 4 Salt Spray: 48h Contact Size: Mixed 16 & 20 Connector Solutions Shell Size: 10 Sealing: IP67 eco|mate(R) rm Standard Products * Suitable For Indoor and Outdoor Applications * EMI/RMI Shielding Capability with Appropriate Backshell * Operating Temperature: -40C to +105C * 500 Mating Cycles * Contacts and Cord Grips Ordered Separately * UL ECBT2 Certified* An upgraded silicone seal is available for all connector parts. Please add "03" to the end of the part number when ordering. Operating Temperature: -40C to +125C. Not available in kits. Insert Arrangement Pin (Male) Faceview Connector Part Numbers Part Number Figure Drawings Connector Type Male Female Jam Nut Receptacle 1,5 2,5 RT07102SNHEC Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal** 3,5 4,5 RT06102PNH RT06102SNH Plug 6 7 RT06102PNHEC RT06102SNHEC Plug with O-ring Seal and End Cap with Individual Rear Wire Seal** 8 9 RT00102PNH RT00102SNH Square Flange Receptacle 10,14 11,14 RT00102PNHEC RT00102SNHEC Square Flange Receptacle with O-ring Seal 12,14 13,14 RT00102PNHEC RT00102SNHEC Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal** 12,14 13,14 RT00102PNHK RT00102SNHK Square Flange Receptacle Kit 10,14 11,14 Male Female RT07102PNH RT07102SNH RT07102PNHEC Contacts supplied separately see page 42 **See page 39 for the real seal wire range Backshells Part Number Backshell Type Cable Range (mm) Figure Drawings Shielding RT0S10CGNS1 Short Cord Grip (straight) 3-6.5 15 RT0S10CGNS2 Short Cord Grip (straight) 5-8.5 15 RT0L10CGNS1 Long Cord Grip (straight) 3-6.5 16 RT0L10CGNS2 Long Cord Grip (straight) 5-8.5 16 *Connector parts with part numbers ending in EC (with an end cap) were not available for submittal at the time of UL certification. 37 Shell Size: 10 Sealing: IP67 Number of Contacts: 4 Salt Spray: 48h Contact Size: Mixed 16 & 20 Dimensions Jam Nut Receptacle Jam Nut Receptacle Male Figure 1 Jam Nut Receptacle RT07102PNH Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 3 RT07102PNHEC Jam Nut Receptacle Panel Cutout Figure 5 38 Female Figure 2 RT07102SNH Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 4 RT07102SNHEC 4 POSITIONS MIX 13A & 5A / 350V Number of Contacts: 4 Salt Spray: 48h Contact Size: Mixed 16 & 20 Connector Solutions Shell Size: 10 Sealing: IP67 Dimensions Plug Plug Female Figure 6 Plug RT06102PNH Female Plug with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 8 RT06102PNHEC Figure 7 RT06102SNH Plug with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 9 RT06102SNHEC Individual Sealing Wire Range Contact Size Insulation Overall Diameter (min-max) Wire Range 16 O2.0mm - O3.2mm 14 - 24 AWG 20 O1.6mm - O2.6mm 20-30 AWG 39 Shell Size: 10 Sealing: IP67 Number of Contacts: 4 Salt Spray: 48h Contact Size: Mixed 16 & 20 Dimensions Square Flange Receptacle Square Flange Receptacle Male Figure 10 Square Flange Receptacle RT00102PNH Square Flange Receptacle with O-ring Seal with End Cap with Individual Rear Wire Seal Male Figure 12 RT00102PNHEC Square Flange Receptacle Panel Cutout Figure 14 40 Female Figure 11 RT00102SNH Square Flange Receptacle with O-ring Seal with End Cap with Individual Rear Wire Seal Female Figure 13 RT00102SNHEC 4 POSITIONS MIX 13A & 5A / 350V Number of Contacts: 4 Salt Spray: 48h Contact Size: Mixed 16 & 20 Connector Solutions Shell Size: 10 Sealing: IP67 Dimensions Backshell Short Cord Grip (straight) Figure 15 Long Cord Grip (straight) Figure 16 Accessories Plug Dustcap with Chain Plug Dustcap without Chain Receptacle Dustcap with Chain Receptacle Dustcap without Chain RT610DCG RT610DC RT010DCG RT010DC Receptacle Dustcap with Nylon Cord, Made of Rubber Receptacle Dustcap without Nylon Cord, Rubber Material Square Flange Receptacle Gaskets, Thickness 0.8mm (0.2) Locking Clip with Lanyard RT010RL RB00011910 RTFD10B 108039110 Sealing Plug Sealing Plug CA402059 CA401659 NEW! See Page 16 41 Shell Size: 10 Sealing: IP67 Number of Contacts: 4 Salt Spray: 48h Contact Size: Mixed 16 & 20 Contacts Machined Contacts Crimp Contacts, Machined Part Number 42 Male Female Contact Size MP14M23F MS14M23F 16 14 2.0-2.5 Gold Flash MP14M23G5 MS14M23G5 16 14 2.0-2.5 Gold 5" MP14M23G10 MS14M23G10 16 14 2.0-2.5 Gold 10" MP14M23G15 MS14M23G15 16 14 2.0-2.5 Gold 15" MP14M23G30 MS14M23G30 16 14 2.0-2.5 Gold 30" MP16M23F MS16M23F 16 18-16 .75-1.5 Gold Flash MP16M23G5 MS16M23G5 16 18-16 .75-1.5 Gold 5" MP16M23G10 MS16M23G10 16 18-16 .75-1.5 Gold 10" MP16M23G15 MS16M23G15 16 18-16 .75-1.5 Gold 15" MP16M23G30 MS16M23G30 16 18-16 .75-1.5 Gold 30" MP20M23F MS20M23F 16 22-20 .34-.50 Gold Flash MP20M23G5 MS20M23G5 16 22-20 .34-.50 Gold 5" MP20M23G10 MS20M23G10 16 22-20 .34-.50 Gold 10" MP20M23G15 MS20M23G15 16 22-20 .34-.50 Gold 15" MP20M23G30 MS20M23G30 16 22-20 .34-.50 Gold 30" MP24M23F MS24M23F 16 26-24 .14-.25 Gold Flash MP24M23G5 MS24M23G5 16 26-24 .14-.25 Gold 5" MP24M23G10 MS24M23G10 16 26-24 .14-.25 Gold 10" MP24M23G15 MS24M23G15 16 26-24 .14-.25 Gold 15" MP24M23G30 MS24M23G30 16 26-24 .14-.25 Gold 30" AWG Wire Range Plating (mm) 4 POSITIONS MIX 13A & 5A / 350V Number of Contacts: 4 Salt Spray: 48h Contact Size: Mixed 16 & 20 Connector Solutions Shell Size: 10 Sealing: IP67 Crimp Contacts Machined (con't) Machined Contacts Part Number Male Female Contact Size MP20W23F MS20W23F 20 MP20W23G5 MS20W23G5 MP20W23G10 Wire Range Plating 22-20 .34-.50 Gold Flash 20 22-20 .34-.50 Gold 5" MS20W23G10 20 22-20 .34-.50 Gold 10" MP20W23G15 MS20W23G15 20 22-20 .34-.50 Gold 15" MP20W23G30 MS20W23G30 20 22-20 .34-.50 Gold 30" MP24W23F MS24W23F 20 .13-.25 26-24 Gold Flash MP24W23G5 MS24W23G5 20 .13-.25 26-24 Gold 5" MP24W23G10 MS24W23G10 20 .13-.25 26-24 Gold 10"" MP24W23G15 MS24W23G15 20 .13-.25 26-24 Gold 15" MP24W23G30 MS24W23G30 20 .13-.25 26-24 Gold 30" MP28W23F MS28W23F 20 30-28 .05-.08 Gold Flash MP28W23G5 MS28W23G5 20 30-28 .05-.08 Gold 5" MP28W23G10 MS28W23G10 20 30-28 .05-.08 Gold 10" MP28W23G15 MS28W23G15 20 30-28 .05-.08 Gold 15" MP28W23G30 MS28W23G30 20 30-28 .05-.08 Gold 30" AWG (mm) Tools Contact Extraction Tool, #16 (O 1.6) Contact Contact Extraction Tool, #20 (O 1.0) Contact Pneumatic Crimp Tool for Machined Contacts Hand Crimp Tool for Machined Contacts QXRT16 QXRT20 MFX-3960 MFX-3959 43 Shell Size: 10 Sealing: IP67 Number of Contacts: 4 Salt Spray: 48h Contact Size: Mixed 16 & 20 Contacts (con't) Stamped & Formed Contacts Crimp Contacts, Stamped & Formed Part Number 44 Male Female Contact Size SP14M1F SS14M1F 16 14 2.0-2.5 Gold Flash SP14M1G5 SS14M1G5 16 14 2.0-2.5 Gold 5" SP14M1G10 SS14M1G10 16 14 2.0-2.5 Gold 10" SP14M1G15 SS14M1G15 16 14 2.0-2.5 Gold 15" SP14M1G30 SS14M1G30 16 14 2.0-2.5 Gold 30" SP16M1F SS16M1F 16 18-16 .75-1.5 Gold Flash SP16M1G5 SS16M1G5 16 18-16 .75-1.5 Gold 5" SP16M1G10 SS16M1G10 16 18-16 .75-1.5 Gold 10" SP16M1G15 SS16M1G15 16 18-16 .75-1.5 Gold 15" SP16M1G30 SS16M1G30 16 18-16 .75-1.5 Gold 30" SP20M1F SS20M1F 16 22-20 .34-.50 Gold Flash SP20M1G5 SS20M1G5 16 22-20 .34-.50 Gold 5" SP20M1G10 SS20M1G10 16 22-20 .34-.50 Gold 10" SP20M1G15 SS20M1G15 16 22-20 .34-.50 Gold 15" SP20M1G30 SS20M1G30 16 22-20 .34-.50 Gold 30" SP24M1F SS24M1F 16 22-20 .14-.25 Gold Flash SP24M1G5 SS24M1G5 16 26-24 .14-.25 Gold 5" SP24M1G10 SS24M1G10 16 26-24 .14-.25 Gold 10" SP24M1G15 SS24M1G15 16 26-24 .14-.25 Gold 15" SP24M1G30 SS24M1G30 16 26-24 .14-.25 Gold 30" AWG Max Wire Plating (mm) 4 POSITIONS MIX 13A & 5A / 350V Number of Contacts: 4 Salt Spray: 48h Contact Size: Mixed 16 & 20 Crimp Contacts, Stamped & Formed (con't) Part Number Male Female Contact Size SP20W1F SS20W1F 20 22-20 .34-.50 Gold Flash SP20W1G10 SS20W1G10 20 22-20 .34-.50 Gold 10" SP20W1G15 SS20W1G15 20 22-20 .34-.50 Gold 15" SP20W1G30 SS20W1G30 20 22-20 .34-.50 Gold 30" SP20W1G5 SS20W1G5 20 22-20 .34-.50 Gold 5" SP24W1F SS24W1F 20 26-24 .14-.25 Gold Flash SP24W1G5 SS24W1G5 20 26-24 .14-.25 Gold 5" SP24W1G10 SS24W1G10 20 26-24 .14-.25 Gold 10" SP24W1G15 SS24W1G15 20 26-24 .14-.25 Gold 15" SP24W1G30 SS24W1G30 20 26-24 .14-.25 Gold 30" SP28W1F SS28W1F 20 30-28 .05-.08 Gold Flash SP28W1G5 SS28W1G5 20 30-28 .05-.08 Gold 5" SP28W1G10 SS28W1G10 20 30-28 .05-.08 Gold 10" SP28W1G15 SS28W1G15 20 30-28 .05-.08 Gold 15" SP28W1G30 SS28W1G30 20 30-28 .05-.08 Gold 30" AWG Max Wire Plating (mm) Connector Solutions Shell Size: 10 Sealing: IP67 Tools Contact Extraction Tool, #16 (O 1.6) Contact Contact Extraction Tool, #20 (O 1.0) Contact Hand Tool for Stamped & Formed Contact, Size 16, 20-14AWG QXRT16 QXRT20 MFX-3954 Hand Tool for Stamped & Formed Contact, Size 20, 20-28AWG Crimp Die for Stamped & Formed Contact MFX-3958 MFX-3957 45 STEP 1 Choose Receptacle Style STEP 2 Choose Plug Style STEP 2 Choose Backshell Style Jam Nut Receptacles RT07142PNH RT0S14CGNS1 RT07142SNH SEE TABLE ON NEXT PAGE FOR PART DETAILS Plug RT06142PNH RT0L14CGNS1 RT06142SNH RT0L14CGNS2 RT06142PNHEC RT0B14CGNS1 RT06142SNHEC RT0B14CGNS2 RT07142SNHEC OR Square Flange Receptacles RT00142PNH RT00142SNH RT00142PNHEC RT00142SNHEC 46 RT0S14CGNS2 RT07142PNHEC CONTACTS SOLD SEPARATELY SEE PAGE 52 Backshell 4 POSITIONS MIX 23A &13A / 350V Number of Contacts: 4 Salt Spray: 48h Contact Size: Mixed 2.5mm & 16 Connector Solutions Shell Size: 14 Sealing: IP67 eco|mate(R) rm Standard Products * Suitable For Indoor and Outdoor Applications * EMI/RMI Shielding Capability with Appropriate Backshell * Operating Temperature: -40C to +105C * 500 Mating Cycles * Contacts and Cord Grips Ordered Separately * UL ECBT2 Certified* An upgraded silicone seal is available for all connector parts. Please add "03" to the end of the part number when ordering. Operating Temperature: -40C to +125C. Not available in kits. Insert Arrangement Pin (Male) Faceview Connector Part Numbers Part Number Figure Drawings Connector Type Male Female Jam Nut Receptacle with O-ring Seal 1,5 2,5 RT07142SNHEC Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal** 3,5 4,5 RT06142PNH RT06142SNH Plug with O-ring Seal 6 7 RT06142PNHEC RT06142SNHEC Plug with O-ring Seal and End Cap with Individual Rear Wire Seal** 8 9 RT00142PNH RT00142SNH Square Flange Receptacle 10,14 11,14 RT00142PNHEC RT00142SNHEC Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal** 12,14 13,14 Male Female RT07142PNH RT07142SNH RT07142PNHEC Contacts supplied separately see page 52 **See page 49 for the real seal wire range Backshells Part Number Backshell Type Cable Range (mm) Figure Drawings Shielding RT0S14CGNS1 Short Cord Grip (straight) 6-10.5 15 RT0S14CGNS2 Short Cord Grip (straight) 8.5-12.5 15 RT0L14CGNS1 Long Cord Grip (straight) 6-10.5 16 RT0L14CGNS2 Long Cord Grip (straight) 8.5-12.5 16 RT0B14CGNS1 Cord Grip (90) 6-10.5 17 RT0B14CGNS2 Cord Grip (90) 8.0-12.5 17 *Connector parts with part numbers ending in EC (with an end cap) were not available for submittal at the time of UL certification. 47 Shell Size: 14 Sealing: IP67 Number of Contacts: 4 Salt Spray: 48h Contact Size: Mixed 2.5mm & 16 Dimensions Jam Nut Receptacle Jam Nut Receptacle with O-ring Seal Male Figure 1 RT07142PNH Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 3 RT07142PNHEC Jam Nut Receptacle Panel Cutout Figure 5 48 Jam Nut Receptacle with O-ring Seal Female Figure 2 RT07142SNH Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 4 RT07142SNHEC 4 POSITIONS MIX 23A &13A / 350V Number of Contacts: 4 Salt Spray: 48h Contact Size: Mixed 2.5mm & 16 Connector Solutions Shell Size: 14 Sealing: IP67 Dimensions Plug Plug with O-ring Seal Male Figure 6 Plug with O-ring Seal RT06142PNH Female Plug with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 8 RT06142PNHEC Figure 7 RT06142SNH Plug with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 9 RT06142SNHEC Individual Sealing Wire Range Contact Size Insulation Overall Diameter (min-max) Wire Range 2.5mm O3.3mm - O4.3mm 14 - 12 AWG 16 O2.0mm - O3.2mm 14 - 24 AWG 49 Shell Size: 14 Sealing: IP67 Number of Contacts: 4 Salt Spray: 48h Contact Size: Mixed 2.5mm & 16 Dimensions Square Flange Receptacle Square Flange Receptacle Male Figure 10 Square Flange Receptacle RT00142PNH Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 12 RT00142PNHEC Square Flange Receptacle Panel Cutout Figure 14 50 Female Figure 11 RT00142SNH Square Flange Receptacle with O-ring Seal Seal and End Cap with Individual Rear Wire Seal Female Figure 13 RT00142SNHEC 4 POSITIONS MIX 23A &13A / 350V Number of Contacts: 4 Salt Spray: 48h Contact Size: Mixed 2.5mm & 16 Connector Solutions Shell Size: 14 Sealing: IP67 Dimensions Backshell Short Cord Grip (straight) Figure 15 Long Cord Grip (straight) Figure 16 Cord Grip (90) Figure 17 Accessories Locking Clip with Lanyard Plug Dustcap with Chain Plug Dustcap without Chain Receptacle Dustcap with Chain 108039114 RT614DCG RT614DC RT014DCG Receptacle Dustcap with Nylon Cord, Made of Rubber Receptacle Dustcap without Chain Receptacle Dustcap without Nylon Cord, Rubber Material Sealing Plug RT014RL RT014DC RB00011914 CA401659 Sealing Plug Square Flange Receptacle Gaskets, Thickness 0.8mm (0.2) CA401659 RTFD14B NEW! See Page 16 51 Shell Size: 14 Sealing: IP67 Number of Contacts: 4 Salt Spray: 48h Contact Size: Mixed 2.5mm & 16 Contacts Machined Contacts Tools Crimp Contacts, Machined Part Number 52 Extraction Tool 2.5mm Contact Male Female Contact Size MP14M23F MS14M23F 16 14 2.0-2.5 Gold Flash MP14M23G5 MS14M23G5 16 14 2.0-2.5 Gold 5" MP14M23G10 MS14M23G10 16 14 2.0-2.5 Gold 10" QXRT12S MP14M23G15 MS14M23G15 16 14 2.0-2.5 Gold 15" Hand Crimp Tool for Machined Contacts MP14M23G30 MS14M23G30 16 14 2.0-2.5 Gold 30" MP16M23F MS16M23F 16 18-16 .75-1.5 Gold Flash MP16M23G5 MS16M23G5 16 18-16 .75-1.5 Gold 5" MP16M23G10 MS16M23G10 16 18-16 .75-1.5 Gold 10" MP16M23G15 MS16M23G15 16 18-16 .75-1.5 Gold 15" MP16M23G30 MS16M23G30 16 18-16 .75-1.5 Gold 30" MP20M23F MS20M23F 16 22-20 .34-.50 Gold Flash MP20M23G5 MS20M23G5 16 22-20 .34-.50 Gold 5" MP20M23G10 MS20M23G10 16 22-20 .34-.50 Gold 10" MP20M23G15 MS20M23G15 16 22-20 .34-.50 Gold 15" MP20M23G30 MS20M23G30 16 22-20 .34-.50 Gold 30" MP24M23F MS24M23F 16 26-24 .14-.25 Gold Flash MP24M23G5 MS24M23G5 16 26-24 .14-.25 Gold 5" MP24M23G10 MS24M23G10 16 26-24 .14-.25 Gold 10" MP24M23G15 MS24M23G15 16 26-24 .14-.25 Gold 15" MP24M23G30 MS24M23G30 16 26-24 .14-.25 Gold 30" AWG Wire Range Plating (mm) MFX-3959 Pneumatic Crimp Tool for Machined Contacts MFX-3960 4 POSITIONS MIX 23A &13A / 350V Number of Contacts: 4 Salt Spray: 48h Contact Size: Mixed 2.5mm & 16 Connector Solutions Shell Size: 14 Sealing: IP67 Contacts (con't) 2.5mm Tools Stamped & Formed Contacts Extraction Tool 2.5mm Contact Crimp Contacts, Stamped & Formed Part Number Male Female Contact Size SP12A1T SS12A1T 2.5mm 14-12 2.5-3.5 Tin SP14M1F SS14M1F 16 14 2.0-2.5 Gold Flash SP14M1G5 SS14M1G5 16 14 2.0-2.5 Gold 5" SP14M1G10 SS14M1G10 16 14 2.0-2.5 Gold 10" SP14M1G15 SS14M1G15 16 14 2.0-2.5 Gold 15" SP14M1G30 SS14M1G30 16 14 2.0-2.5 Gold 30" SP16M1F SS16M1F 16 18-16 .75-1.5 Gold Flash SP16M1G5 SS16M1G5 16 18-16 .75-1.5 Gold 5" SP16M1G10 SS16M1G10 16 18-16 .75-1.5 Gold 10" SP16M1G15 SS16M1G15 16 18-16 .75-1.5 Gold 15" SP16M1G30 SS16M1G30 16 18-16 .75-1.5 Gold 30" SP20M1F SS20M1F 16 22-20 .34-.50 Gold Flash SP20M1G5 SS20M1G5 16 22-20 .34-.50 Gold 5" SP20M1G10 SS20M1G10 16 22-20 .34-.50 Gold 10" SP20M1G15 SS20M1G15 16 22-20 .34-.50 Gold 15" SP20M1G30 SS20M1G30 16 22-20 .34-.50 Gold 30" SP24M1F SS24M1F 16 22-20 .14-.25 Gold Flash SP24M1G5 SS24M1G5 16 26-24 .14-.25 Gold 5" SP24M1G10 SS24M1G10 16 26-24 .14-.25 Gold 10" SP24M1G15 SS24M1G15 16 26-24 .14-.25 Gold 15" SP24M1G30 SS24M1G30 16 26-24 .14-.25 Gold 30" AWG Wire Range Plating QXRT12S (mm) Contact Extraction Tool, #16 (O 1.6) Contact QXRT16 Hand Tool, Stamped & Formed Contact, 2.5 mm MFX-3962 Hand Tool, Stamped & Formed Contact, Size 16 MFX-3954 Crimp Die for Stamped & Formed Contact MFX-3957 53 STEP 1 Choose Receptacle Style STEP 2 Choose Plug Style STEP 2 Choose Backshell Style Jam Nut Receptacles RT07144PNH RT0S14CGNS1 RT07144SNH SEE TABLE ON NEXT PAGE FOR PART DETAILS Plug RT06144PNH RT0L14CGNS1 RT06144SNH RT0L14CGNS2 RT06144PNHEC RT0B14CGNS1 RT06144SNHEC RT0B14CGNS2 RT07144SNHEC OR Square Flange Receptacles RT00144PNH RT00144SNH RT00144PNHEC RT00144SNHEC 54 RT0S14CGNS2 RT07144PNHEC CONTACTS SOLD SEPARATELY SEE PAGE 60 Backshell 4 POSITIONS 23A / 350V Number of Contacts: 4 Salt Spray: 48h Contact Size: 2.5mm Connector Solutions Shell Size: 14 Sealing: IP67 eco|mate(R) rm Standard Products * Suitable For Indoor and Outdoor Applications * EMI/RMI Shielding Capability with Appropriate Backshell * Operating Temperature: -40C to +105C * 500 Mating Cycles * Contacts and Cord Grips Ordered Separately * UL ECBT2 Certified* An upgraded silicone seal is available for all connector parts. Please add "03" to the end of the part number when ordering. Operating Temperature: -40C to +125C. Not available in kits. Insert Arrangement Pin (Male) Faceview Connector Part Numbers Part Number Figure Drawings Connector Type Male Female Jam Nut Receptacle 1,5 2,5 RT07144SNHEC Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal** 3,5 4,5 RT06144PNH RT06144SNH Plug 6 7 RT06144PNHEC RT06144SNHEC Plug with O-ring Seal and End Cap with Individual Rear Wire Seal** 8 9 RT00144PNH RT00144SNH Square Flange Receptacle 10 11,14 RT00144PNHEC RT00144SNHEC Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal** 12,14 13,14 Male Female RT07144PNH RT07144SNH RT07144PNHEC Contacts supplied separately see page 60 **See page 57 for the real seal wire range Backshells Part Number Backshell Type Cable Range (mm) Figure Drawings Shielding RT0S14CGNS1 Short Cord Grip (straight) 6-10.5 15 RT0S14CGNS2 Short Cord Grip (straight) 8.5-12.5 15 RT0L14CGNS1 Long Cord Grip (straight) 6-10.5 16 RT0L14CGNS2 Long Cord Grip (straight) 8.5-12.5 16 RT0B14CGNS1 Cord Grip (90) 6-10.5 17 RT0B14CGNS2 Cord Grip (90) 8.0-12.5 17 *Connector parts with part numbers ending in EC (with an end cap) were not available for submittal at the time of UL certification. 55 Shell Size: 14 Sealing: IP67 Number of Contacts: 4 Salt Spray: 48h Contact Size: 2.5mm Dimensions Jam Nut Receptacle Jam Nut Receptacle Male Figure 1 Jam Nut Receptacle RT07144PNH Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 3 RT07144PNHEC Jam Nut Receptacle Panel Cutout Figure 5 56 Female Figure 2 RT07144SNH Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 4 RT07144SNHEC 4 POSITIONS 23A / 350V Number of Contacts: 4 Salt Spray: 48h Contact Size: 2.5mm Connector Solutions Shell Size: 14 Sealing: IP67 Dimensions Plug Plug Male Figure 6 Plug RT06144PNH Female Plug with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 8 RT06144PNHEC Figure 7 RT06144SNH Plug with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 9 RT06144SNHEC Individual Sealing Wire Range Contact Size Insulation Overall Diameter (min-max) Wire Range 2.5mm O3.3mm - O4.3mm 14 - 12 AWG 57 Shell Size: 14 Sealing: IP67 Number of Contacts: 4 Salt Spray: 48h Contact Size: 2.5mm Dimensions Square Flange Receptacle Square Flange Receptacle Male Figure 10 Square Flange Receptacle RT00144PNH Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 12 RT00144PNHEC Square Flange Receptacle Panel Cutout Figure 14 58 Female Figure 11 RT00144SNH Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 13 RT00144SNHEC 4 POSITIONS 23A / 350V Number of Contacts: 4 Salt Spray: 48h Contact Size: 2.5mm Dimensions Backshell Short Cord Grip (straight) Connector Solutions Shell Size: 14 Sealing: IP67 Figure 15 Long Cord Grip (straight) Figure 16 Cord Grip (90) Figure 17 59 Shell Size: 14 Sealing: IP67 Number of Contacts: 4 Salt Spray: 48h Contact Size: 2.5mm Contacts Stamped & Formed Contacts Crimp Contacts, Stamped & Formed Part Number Male Female SP12A1T SS12A1T AWG Wire Range Plating 2.5-3.5 Tin (mm) 14-12 No machined contacts are available for this group Tools 60 Extraction Tool 2.5mm Contact Hand Tool, Stamped & Formed Contact, 2.5 mm QXRT12S MFX-3962 4 POSITIONS 23A / 350V Number of Contacts: 4 Salt Spray: 48h Contact Size: 2.5mm Accessories Plug Dustcap with Chain Plug Dustcap without Chain Receptacle Dustcap with Chain RT614DCG RT614DC RT014DCG Receptacle Dustcap with Nylon Cord, Made of Rubber Receptacle Dustcap without Chain Receptacle Dustcap without Nylon Cord, Rubber Material RT014RL RT014DC RB00011914 Sealing Plug Square Flange Receptacle Gaskets, Thickness 0.8mm (0.2) Locking Clip with Lanyard RTFD14B 108039114 CA401259 Connector Solutions Shell Size: 14 Sealing: IP67 NEW! See Page 16 61 STEP 1 Choose Receptacle Style STEP 2 Choose Plug Style STEP 2 Choose Backshell Style Jam Nut Receptacles RT07164PNH RT0S16CGNS1 RT07164SNH SEE TABLE ON NEXT PAGE FOR PART DETAILS Plug RT0S16CGNS2 RT07164PNHEC RT06164PNH OR Square Flange Receptacles RT06164SNH RT06164PNHEC RT0L16CGNS2 RT0B16CGNS1 RT00164PNH RT06164SNHEC RT00164SNH RT00164PNHEC RT00164SNHEC 62 RT0L16CGNS1 RT07164SNHEC RT0B16CGNS2 CONTACTS SOLD SEPARATELY SEE PAGE 68 Backshell 4 POSITIONS 45A / 500V Number of Contacts: 4 Salt Spray: 48h Contact Size: 3.6mm Connector Solutions Shell Size: 16 Sealing: IP67 eco|mate(R) rm Standard Products * Suitable For Indoor and Outdoor Applications * EMI/RMI Shielding Capability with Appropriate Backshell * Operating Temperature: -40C to +105C * 500 Mating Cycles * Contacts and Cord Grips Ordered Separately * UL ECBT2 Certified* An upgraded silicone seal is available for all connector parts. Please add "03" to the end of the part number when ordering. Operating Temperature: -40C to +125C. Not available in kits. Insert Arrangement Pin (Male) Faceview Connector Part Numbers Part Number Figure Drawings Connector Type Male Female Jam Nut Receptacle 1,5 2,5 RT07164SNHEC Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal** 3,5 4,5 RT06164PNH RT06164SNH Plug 6 7 RT06164PNHEC RT06164SNHEC Plug with O-ring Seal and End Cap with Individual Rear Wire Seal** 8 9 RT00164PNH RT00164SNH Square Flange Receptacle 10,14 11,14 RT00164PNHEC RT00164SNHEC Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal** 12,14 13,14 Male Female RT07164PNH RT07164SNH RT07164PNHEC Contacts supplied separately see page 68 **See page 65 for the real seal wire range Backshells Part Number Backshell Type Cable Range (mm) Figure Drawings Shielding RT0S16CGNS1 Short Cord Grip (straight) 9.0-14.5 15 RT0S16CGNS2 Short Cord Grip (straight) 13.5-17 15 RT0L16CGNS1 Long Cord Grip (straight) 9.0-14.5 16 RT0L16CGNS2 Long Cord Grip (straight) 13.5-17 16 RT0B16CGNS1 Cord Grip (90) 9.5-14.5 17 RT0B16CGNS2 Cord Grip (90) 13.5-17.0 17 *Connector parts with part numbers ending in EC (with an end cap) were not available for submittal at the time of UL certification. 63 Shell Size: 16 Sealing: IP67 Number of Contacts: 4 Salt Spray: 48h Contact Size: 3.6mm Dimensions Jam Nut Receptacle Jam Nut Receptacle Male Figure 1 Jam Nut Receptacle RT07164PNH Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 3 RT07164PNHEC Jam Nut Receptacle Panel Cutout Figure 5 64 Female Figure 2 RT07164SNH Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 4 RT07164SNHEC 4 POSITIONS 45A / 500V Number of Contacts: 4 Salt Spray: 48h Contact Size: 3.6mm Connector Solutions Shell Size: 16 Sealing: IP67 Dimensions Plug Plug Male Figure 6 Plug RT06164PNH Female Plug with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 8 RT06164PNHEC Figure 7 RT06164SNH Plug with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 9 RT06164SNHEC Individual Sealing Wire Range Contact Size Insulation Overall Diameter (min-max) Wire Range 3.6mm O2.8mm - O5.8mm 12 - 10 AWG 65 Shell Size: 16 Sealing: IP67 Number of Contacts: 4 Salt Spray: 48h Contact Size: 3.6mm Dimensions Square Flange Receptacle Square Flange Receptacle Male Figure 10 Square Flange Receptacle RT00164PNH Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 12 RT00164PNHEC Square Flange Receptacle Panel Cutout Figure 14 66 Female Figure 11 RT00164SNH Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 13 RT00164SNHEC 4 POSITIONS 45A / 500V Number of Contacts: 4 Salt Spray: 48h Contact Size: 3.6mm Dimensions Backshell Short Cord Grip (straight) Connector Solutions Shell Size: 16 Sealing: IP67 Figure 15 Long Cord Grip (straight) Figure 16 Cord Grip (90) Figure 17 67 Shell Size: 16 Sealing: IP67 Number of Contacts: 4 Salt Spray: 48h Contact Size: 3.6mm Contacts Machined Contacts Crimp Contacts, Machined Part Number Male Female MP10A23S MS10A23S AWG Wire Range Plating 3.0-6.0 Silver Plated (mm) 8 no stamped & formed contacts are available for this groupt Tools 68 Extraction Tool 3.6mm Contact Extraction Tool (for eco|mate(R) rm with Radsok) 3.6mm Contact QXRT08 QXRT08R 4 POSITIONS 45A / 500V Number of Contacts: 4 Salt Spray: 48h Contact Size: 3.6mm Accessories Plug Dustcap with Chain Plug Dustcap without Chain Receptacle Dustcap with Chain RT616DCG RT616DC RT016DCG Receptacle Dustcap with Nylon Cord, Made of Rubber Receptacle Dustcap without Chain Receptacle Dustcap without Nylon Cord, Rubber Material RT016RL RT016DC RB00011916 Square Flange Receptacle Gaskets, Thickness 0.8mm (0.2) Locking Clip with Lanyard RTFD16B 108039116 Connector Solutions Shell Size: 16 Sealing: IP67 NEW! See Page 16 69 STEP 1 Choose Receptacle Style STEP 2 Choose Plug Style STEP 2 Choose Backshell Style Jam Nut Receptacles Backshell RT0W7106SNH SEE TABLE ON NEXT PAGE FOR PART DETAILS Plug RT0S10CGNS1 RT0W7106PNHEC RT0W6106PNH RT0W7106SNHEC RT0S10CGNS2 OR Square Flange Receptacles RT0W6106SNH RT0L10CGNS1 RT0W6106PNHEC RT0W0106PNH RT0W6106SNHEC RT0L10CGNS2 RT0W0106SNH OR RT0W0106PNHEC RT0W0106SNHEC 70 Square Flange Receptacle Kit Including Receptacle,Gasket & Contacts Plug Kit Including Connector, Backshell & Contacts CONTACTS SOLD SEPARATELY SEE PAGE 76 RT0W7106PNH Jam Nut Receptacle Kit Including Receptacle & Contacts 6 POSITIONS 5A, 7.5A / 150V Number of Contacts: 6 Salt Spray: 48h Contact Size: 20 Connector Solutions Shell Size: 10 Sealing: IP67 eco|mate(R) rm Standard Products * Suitable For Indoor and Outdoor Applications * EMI/RMI Shielding Capability with Appropriate Backshell * Operating Temperature: -40C to +105C * 500 Mating Cycles * Contacts and Cord Grips Ordered Separately * UL ECBT2 Certified* An upgraded silicone seal is available for all connector parts. Please add "03" to the end of the part number when ordering. Operating Temperature: -40C to +125C. Not available in kits. Insert Arrangement Pin (Male) Faceview Connector Part Numbers Part Number Figure Drawings Connector Type Male Female Jam Nut Receptacle 1,5 2,5 RT0W7106SNHEC Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal** 3,5 4,5 RT0W7106PNHK RT0W7106SNHK Jam Nut Receptacle Kit 1,5 2,5 RT0W6106PNH RT0W6106SNH Plug 6 7 RT0W6106PNHEC RT0W6106SNHEC Plug with O-ring Seal and End Cap with Individual Rear Wire Seal** 8 9 RT0W6106PNHK RT0W6106SNHK Plug Kit 6 7 RT0W0106PNH RT0W0106SNH Square Flange Receptacle 10,14 11,14 RT0W0106PNHEC RT0W0106SNHEC Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal** 12,14 13,14 RT0W0106PNHK RT0W0106SNHK Square Flange Receptacle Kit 10,14 11,14 Male Female RT0W7106PNH RT0W7106SNH RT0W7106PNHEC Backshells Contacts supplied separately see page 76 **See page 73 for the real seal wire range Part Number Backshell Type Cable Range (mm) Figure Drawings Shielding RT0S10CGNS1 Short Cord Grip (straight) 3-6.5 15 RT0S10CGNS2 Short Cord Grip (straight) 5-8.5 15 RT0L10CGNS1 Long Cord Grip (straight) 3-6.5 16 RT0L10CGNS2 Long Cord Grip (straight) 5-8.5 16 *Connector parts with part numbers ending in EC (with an end cap) were not available for submittal at the time of UL certification. 71 Shell Size: 10 Sealing: IP67 Number of Contacts: 6 Salt Spray: 48h Contact Size: 20 Dimensions Jam Nut Receptacle Jam Nut Receptacle Male Figure 1 Jam Nut Receptacle RT0W7106PNH Figure 2 RT0W7106SNH Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Male Female Figure 3 RT0W7106PNHEC Jam Nut Receptacle Panel Cutout Figure 5 72 Female Figure 4 RT0W7106SNHEC 6 POSITIONS 5A, 7.5A / 150V Number of Contacts: 6 Salt Spray: 48h Contact Size: 20 Connector Solutions Shell Size: 10 Sealing: IP67 Dimensions Plug Plug Male Figure 6 Plug RT0W6106PNH Female Plug with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 8 Figure 7 RT0W6106SNH Plug with O-ring Seal and End Cap with Individual Rear Wire Seal RT0W6106PNHEC Female Figure 9 RT0W6106SNHEC Individual Sealing Wire Range Contact Size Insulation Overall Diameter (min-max) Wire Range 20 O1.6mm - O2.6mm 20 - 30 AWG 73 Shell Size: 10 Sealing: IP67 Number of Contacts: 6 Salt Spray: 48h Contact Size: 20 Dimensions Square Flange Receptacle Square Flange Receptacle Female Figure 10 Square Flange Receptacle RT0W0106PNH Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 12 RT0W0106PNHEC Square Flange Receptacle Panel Cutout Figure 14 74 Female Figure 11 RT0W0106SNH Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 13 RT0W0106SNHEC 6 POSITIONS 5A, 7.5A / 150V Number of Contacts: 6 Salt Spray: 48h Contact Size: 20 Connector Solutions Shell Size: 10 Sealing: IP67 Dimensions Backshell Short Cord Grip (straight) Figure 15 Long Cord Grip (straight) Figure 16 Accessories Locking Clip with Lanyard Plug Dustcap with Chain Plug Dustcap without Chain Receptacle Dustcap with Chain 108039110 RT610DCG RT610DC RT010DCG Receptacle Dustcap without Chain Receptacle Dustcap with Nylon Cord, Made of Rubber Receptacle Dustcap without Nylon Cord, Rubber Material Sealing Plug RT010DC RT010RL RB00011910 CA402059 NEW! See Page 16 Square Flange Receptacle Gaskets, Thickness 0.8mm (0.2) RTFD10B 75 Shell Size: 10 Sealing: IP67 Number of Contacts: 6 Salt Spray: 48h Contact Size: 20 Contacts Machined Contacts Tools Crimp Contacts, Machined (7.5A) Part Number 76 AWG Wire Range Plating Male Female MP20W23F MS20W23F 22-20 .34-.50 Gold Flash MP20W23G5 MS20W23G5 22-20 .34-.50 Gold 5" MP20W23G10 MS20W23G10 22-20 .34-.50 Gold 10" MP20W23G15 MS20W23G15 22-20 .34-.50 Gold 15" MP20W23G30 MS20W23G30 22-20 .34-.50 Gold 30" MP24W23F MS24W23F 26-24 .13-.25 Gold Flash MP24W23G5 MS24W23G5 26-24 .13-.25 Gold 5" MP24W23G10 MS24W23G10 26-24 .13-.25 Gold 10" MP24W23G15 MS24W23G15 26-24 .13-.25 Gold 15" MP24W23G30 MS24W23G30 26-24 .13-.25 Gold 30" MP28W23F MS28W23F 30-28 .05-.08 Gold Flash MP28W23G5 MS28W23G5 30-28 .05-.08 Gold 5" MP28W23G10 MS28W23G10 30-28 .05-.08 Gold 10" MP28W23G15 MS28W23G15 30-28 .05-.08 Gold 15" MP28W23G30 MS28W23G30 30-28 .05-.08 Gold 30" Contact Extraction Tool, #20 (O 1.0) Contact (mm) QXRT20 Hand Crimp Tool for Machined Contacts MFX-3959 Pneumatic Crimp Tool for Machined Contact MFX-3960 6 POSITIONS 5A, 7.5A / 150V Number of Contacts: 6 Salt Spray: 48h Contact Size: 20 Connector Solutions Shell Size: 10 Sealing: IP67 Contacts (con't) Stamped & Formed Contacts Crimp Contacts, Stamped & Formed (5A) Part Number AWG Wire Range Plating Male Female SP20W1F SS20W1F 22-20 .34-.50 Gold Flash SP20W1G5 SS20W1G5 22-20 .34-.50 Gold 5" SP20W1G10 SS20W1G10 22-20 .34-.50 Gold 10" SP20W1G15 SS20W1G15 22-20 .34-.50 Gold 15" SP20W1G30 SS20W1G30 22-20 .34-.50 Gold 30" SP24W1F SS24W1F 26-24 .14-.25 Gold Flash SP24W1G5 SS24W1G5 26-24 .14-.25 Gold 5" SP24W1G10 SS24W1G10 26-24 .14-.25 Gold 10" SP24W1G15 SS24W1G15 26-24 .14-.25 Gold 15" SP24W1G30 SS24W1G30 26-24 .14-.25 Gold 30" SP28W1F SS28W1F 30-28 .05-.08 Gold Flash SP28W1G5 SS28W1G5 30-28 .05-.08 Gold 5" SP28W1G10 SS28W1G10 30-28 .05-.08 Gold 10" SP28W1G15 SS28W1G15 30-28 .05-.08 Gold 15" SP28W1G30 SS28W1G30 30-28 .05-.08 Gold 30" Tools Contact Extraction Tool, #20 (O 1.0) Contact (mm) QXRT20 Hand Tool for Stamped & Formed Contact, Size 20, 20-28AWG MFX-3958 Crimp Die for Stamped & Formed Contact MFX-3957 77 STEP 1 Choose Receptacle Style STEP 2 Choose Plug Style STEP 2 Choose Backshell Style Jam Nut Receptacles RT0S12CGNS1 RT07128SNH SEE TABLE ON NEXT PAGE FOR PART DETAILS Plug RT0S12CGNS2 RT07128PNHEC RT06128PNH RT0L12CGNS1 RT07128SNHEC OR Square Flange Receptacles RT06128SNH RT06128SNHEC RT0L12CGNS2 RT0B12CGNS1 RT00128PNH RT06128PNHEC RT0B12CGNS2 RT00128SNH OR RT00128PNHEC RT00128SNHEC 78 Square Flange Receptacle Kit Including Receptacle,Gasket & Contacts Plug Kit Including Connector, Backshell & Contacts CONTACTS SOLD SEPARATELY SEE PAGE 84 RT07128PNH Backshell Jam Nut Receptacle Kit Including Receptacle & Contacts 8 POSITIONS 13A / 250V Number of Contacts: 8 Salt Spray: 48h Contact Size: 16 Connector Solutions Shell Size: 12 Sealing: IP67 eco|mate(R) rm Standard Products * Suitable For Indoor and Outdoor Applications * EMI/RMI Shielding Capability with Appropriate Backshell * Operating Temperature: -40C to +105C * 500 Mating Cycles * Contacts and Cord Grips Ordered Separately * UL ECBT2 Certified* An upgraded silicone seal is available for all connector parts. Please add "03" to the end of the part number when ordering. Operating Temperature: -40C to +125C. Not available in kits. Insert Arrangement Pin (Male) Faceview Connector Part Numbers Part Number Figure Drawings Connector Type Male Female Jam Nut Receptacle 1,5 2,5 RT07128SNHEC Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal** 3,5 4,5 RT07128PNHK RT07128SNHK Jam Nut Receptacle Kit 1,5 2,5 RT06128PNH RT06128SNH Plug 6 7 RT06128PNHEC RT06128SNHEC Plug with O-ring Seal and End Cap with Individual Rear Wire Seal** 8 9 RT06128PNHK RT06128SNHK Plug Kit 6 7 RT00128PNH RT00128SNH Square Flange Receptacle 10 11,14 RT00128PNHEC RT00128SNHEC Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal** 12,14 13,14 RT00128PNHK RT00128SNHK Square Flange Receptacle Kit 10,14 11,14 Male Female RT07128PNH RT07128SNH RT07128PNHEC Backshells Contacts supplied separately see page 84 **See page 81 for the real seal wire range Part Number Backshell Type Cable Range (mm) Figure Drawings Shielding RT0S12CGNS1 Short Cord Grip (straight) 6-10.5 15 RT0S12CGNS2 Short Cord Grip (straight) 8.5-12.5 15 RT0L12CGNS1 Long Cord Grip (straight) 6-10.5 16 RT0L12CGNS2 Long Cord Grip (straight) 8.5-12.5 16 RT0B12CGNS1 Cord Grip (90) 6-10.5 17 RT0B12CGNS2 Cord Grip (90) 8.0-12.5 17 *Connector parts with part numbers ending in EC (with an end cap) were not available for submittal at the time of UL certification. 79 Shell Size: 12 Sealing: IP67 Number of Contacts: 8 Salt Spray: 48h Contact Size: 16 Dimensions Jam Nut Receptacle Jam Nut Receptacle Male Figure 1 Jam Nut Receptacle RT07128PNH Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 3 RT07128PNHEC Jam Nut Receptacle Panel Cutout Figure 5 80 Female Figure 2 RT07128SNH Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 4 RT07128SNHEC 8 POSITIONS 13A / 250V Number of Contacts: 8 Salt Spray: 48h Contact Size: 16 Connector Solutions Shell Size: 12 Sealing: IP67 Dimensions Plug Plug Male Figure 6 Plug RT06128PNH Female Plug with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 8 RT06128PNHEC Figure 7 RT06128SNH Plug with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 9 RT06128SNHEC Individual Sealing Wire Range Contact Size Insulation Overall Diameter (min-max) Wire Range 16 O2.0mm - O3.2mm 14 - 24 AWG 81 Shell Size: 12 Sealing: IP67 Number of Contacts: 8 Salt Spray: 48h Contact Size: 16 Dimensions Square Flange Receptacle Square Flange Receptacle Male Figure 10 Square Flange Receptacle RT00128PNH Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 12 RT00128PNHEC Square Flange Receptacle Panel Cutout Figure 14 82 Female Figure 11 RT00128SNH Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 13 RT00128SNHEC 8 POSITIONS 13A / 250V Number of Contacts: 8 Salt Spray: 48h Contact Size: 16 Connector Solutions Shell Size: 12 Sealing: IP67 Dimensions Backshell Short Cord Grip (straight) Figure 15 Long Cord Grip (straight) Figure 16 Cord Grip (90) Figure 17 Accessories Locking Clip with Lanyard Plug Dustcap with Chain Plug Dustcap without Chain Receptacle Dustcap with Chain 108039112 RT612DCG RT612DC RT012DCG Receptacle Dustcap with Nylon Cord, Made of Rubber Receptacle Dustcap without Chain Receptacle Dustcap without Nylon Cord, Rubber Material Sealing Plug RT012RL RT012DC RB00011912 CA401659 NEW! see Page 16 Square Flange Receptacle Gaskets, Thickness 0.8mm (0.2) RTFD12B 83 Shell Size: 12 Sealing: IP67 Number of Contacts: 8 Salt Spray: 48h Contact Size: 16 Contacts Machined Contacts Crimp Contacts, Machined Part Number 84 AWG Tools Wire Range Plating Male Female MP14M23F MS14M23F 14 2.0-2.5 Gold Flash MP14M23G5 MS14M23G5 14 2.0-2.5 Gold 5" MP14M23G10 MS14M23G10 14 2.0-2.5 Gold 10" MP14M23G15 MS14M23G15 14 2.0-2.5 Gold 15" MP14M23G30 MS14M23G30 14 2.0-2.5 Gold 30" MP16M23F MS16M23F 18-16 .75-1.5 Gold Flash MP16M23G5 MS16M23G5 18-16 .75-1.5 Gold 5" MP16M23G10 MS16M23G10 18-16 .75-1.5 Gold 10" MP16M23G15 MS16M23G15 18-16 .75-1.5 Gold 15" MP16M23G30 MS16M23G30 18-16 .75-1.5 Gold 30" MP20M23F MS20M23F 22-20 .34-.50 Gold Flash MP20M23G5 MS20M23G5 22-20 .34-.50 Gold 5" MP20M23G10 MS20M23G10 22-20 .34-.50 Gold 10" MP20M23G15 MS20M23G15 22-20 .34-.50 Gold 15" MP20M23G30 MS20M23G30 22-20 .34-.50 Gold 30" MP24M23F MS24M23F 26-24 .14-.25 Gold Flash MP24M23G5 MS24M23G5 26-24 .14-.25 Gold 5" MP24M23G10 MS24M23G10 26-24 .14-.25 Gold 10" MP24M23G15 MS24M23G15 26-24 .14-.25 Gold 15" MP24M23G30 MS24M23G30 26-24 .14-.25 Gold 30" Contact Extraction Tool, #16 (O 1.6) Contact (mm) QXRT16 Hand Crimp Tool for Machined Contacts MFX-3959 Pneumatic Crimp Tool for Machined Contacts MFX-3960 8 POSITIONS 13A / 250V Number of Contacts: 8 Salt Spray: 48h Contact Size: 16 Connector Solutions Shell Size: 12 Sealing: IP67 Contacts (con't) Stamped & Formed Contacts Tools Crimp Contacts, Stamped & Formed Part Number AWG Wire Range Plating Male Female SP14M1F SS14M1F 14 2.0-2.5 Gold Flash SP14M1G5 SS14M1G5 14 2.0-2.5 Gold 5" SP14M1G10 SS14M1G10 14 2.0-2.5 Gold 10" SP14M1G15 SS14M1G15 14 2.0-2.5 Gold 15" SP14M1G30 SS14M1G30 14 2.0-2.5 Gold 30" SP16M1F SS16M1F 18-16 .75-1.5 Gold Flash SP16M1G5 SS16M1G5 18-16 .75-1.5 Gold 5" SP16M1G10 SS16M1G10 18-16 .75-1.5 Gold 10" SP16M1G15 SS16M1G15 18-16 .75-1.5 Gold 15" SP16M1G30 SS16M1G30 18-16 .75-1.5 Gold 30" SP20M1F SS20M1F 22-20 .34-.50 Gold Flash SP20M1G5 SS20M1G5 22-20 .34-.50 Gold 5" SP20M1G10 SS20M1G10 22-20 .34-.50 Gold 10" SP20M1G15 SS20M1G15 22-20 .34-.50 Gold 15" SP20M1G30 SS20M1G30 22-20 .34-.50 Gold 30" SP24M1F SS24M1F 22-20 .14-.25 Gold Flash SP24M1G5 SS24M1G5 26-24 .14-.25 Gold 5" SP24M1G10 SS24M1G10 26-24 .14-.25 Gold 10" SP24M1G15 SS24M1G15 26-24 .14-.25 Gold 15" SP24M1G30 SS24M1G30 26-24 .14-.25 Gold 30" Contact Extraction Tool, #16 (O 1.6) Contact (mm) QXRT16 Hand Tool, Stamped & Formed Contact, Size 16, 20-14AWG MFX-3954 Crimp Die for Stamped & Formed Contact MFX-3957 85 STEP 1 Choose Receptacle Style STEP 2 Choose Plug Style STEP 2 Choose Backshell Style Jam Nut Receptacles RT07148PNH RT0S14CGNS1 RT07148SNH SEE TABLE ON NEXT PAGE FOR PART DETAILS Plug RT0S14CGNS2 RT07148PNHEC RT0L14CGNS1 RT06148PNH RT0L14CGNS2 RT06148PNHEC RT0B14CGNS1 RT06148SNHEC RT0B14CGNS2 RT07148SNHEC OR Square Flange Receptacles RT00148PNH RT00148SNH RT00148PNHEC RT00148SNHEC 86 RT06148SNH CONTACTS SOLD SEPARATELY SEE PAGE 92 Backshell 8 POSITIONS 13A / 300V Number of Contacts: 8 Salt Spray: 48h Contact Size: 16 Connector Solutions Shell Size: 14 Sealing: IP67 eco|mate(R) rm Standard Products * Suitable For Indoor and Outdoor Applications * EMI/RMI Shielding Capability with Appropriate Backshell * Operating Temperature: -40C to +105C * 500 Mating Cycles * Contacts and Cord Grips Ordered Separately * UL ECBT2 Certified* An upgraded silicone seal is available for all connector parts. Please add "03" to the end of the part number when ordering. Operating Temperature: -40C to +125C. Not available in kits. Insert Arrangement Pin (Male) Faceview Connector Part Numbers Part Number Figure Drawings Connector Type Male Female Jam Nut Receptacle with O-ring Seal 1,5 2,5 RT07148SNHEC Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal** 3,5 4,5 RT06148PNH RT06148SNH Plug with O-ring Seal 6 7 RT06148PNHEC RT06148SNHEC Plug with O-ring Seal and End Cap with Individual Rear Wire Seal** 8 9 RT00148PNH RT00148SNH Square Flange Receptacle with O-ring Seal** 10,14 11,14 RT00148PNHEC RT00148SNHEC Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal** 12,14 13,14 Male Female RT07148PNH RT07148SNH RT07148PNHEC Contacts supplied separately see page 92 **See page 89 for the real seal wire range Backshells Part Number Backshell Type Cable Range (mm) Figure Drawings Shielding RT0S14CGNS1 Short Cord Grip (straight) 6-10.5 15 RT0S14CGNS2 Short Cord Grip (straight) 8.5-12.5 15 RT0L14CGNS1 Long Cord Grip (straight) 6-10.5 16 RT0L14CGNS2 Long Cord Grip (straight) 8.5-12.5 16 RT0B14CGNS1 Cord Grip (90) 6-10.5 17 RT0B14CGNS2 Cord Grip (90) 8.0-12.5 17 *Connector parts with part numbers ending in EC (with an end cap) were not available for submittal at the time of UL certification. 87 Shell Size: 14 Sealing: IP67 Number of Contacts: 8 Salt Spray: 48h Contact Size: 16 Dimensions Jam Nut Receptacle Jam Nut Receptacle with O-ring Seal Male Figure 1 RT07148PNH Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 3 RT07148PNHEC Jam Nut Receptacle Panel Cutout Figure 5 88 Jam Nut Receptacle with O-ring Seal Female Figure 2 RT07148SNH Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 4 RT07148SNHEC 8 POSITIONS 13A / 300V Number of Contacts: 8 Salt Spray: 48h Contact Size: 16 Connector Solutions Shell Size: 14 Sealing: IP67 Dimensions Plug Plug with O-ring Seal Male Figure 6 Plug with O-ring Seal RT06148PNH Female Plug with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 8 RT06148PNHEC Figure 7 RT06148SNH Plug with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 9 RT06148SNHEC Individual Sealing Wire Range Contact Size Insulation Overall Diameter (min-max) Wire Range 16 O2.0mm - O3.2mm 14 - 24 AWG 89 Shell Size: 14 Sealing: IP67 Number of Contacts: 8 Salt Spray: 48h Contact Size: 16 Dimensions Square Flange Receptacle Square Flange Receptacle with O-ring Seal Male Figure 10 RT00148PNH Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 12 RT00148PNHEC Square Flange Receptacle Panel Cutout Figure 14 90 Square Flange Receptacle with O-ring Seal Female Figure 11 RT00148SNH Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 13 RT00148SNHEC 8 POSITIONS 13A / 300V Number of Contacts: 8 Salt Spray: 48h Contact Size: 16 Connector Solutions Shell Size: 14 Sealing: IP67 Dimensions Backshell Short Cord Grip (straight) Figure 15 Long Cord Grip (straight) Figure 16 Cord Grip (90) Figure 17 Accessories Locking Clip with Lanyard Plug Dustcap with Chain Plug Dustcap without Chain Receptacle Dustcap with Chain 108039114 RT614DCG RT614DC RT014DCG Receptacle Dustcap with Nylon Cord, Made of Rubber Receptacle Dustcap without Chain Receptacle Dustcap without Nylon Cord, Rubber Material Sealing Plug RT014RL RT014DC RB00011914 CA401659 NEW! See Page 16 Square Flange Receptacle Gaskets, Thickness 0.8mm (0.2) RTFD12B 91 Shell Size: 14 Sealing: IP67 Number of Contacts: 8 Salt Spray: 48h Contact Size: 16 Contacts Machined Contacts Tools Crimp Contacts, Machined Part Number 92 AWG Wire Range Plating Male Female MP14M23F MS14M23F 14 2.0-2.5 Gold Flash MP14M23G5 MS14M23G5 14 2.0-2.5 Gold 5" MP14M23G10 MS14M23G10 14 2.0-2.5 Gold 10" MP14M23G15 MS14M23G15 14 2.0-2.5 Gold 15" MP14M23G30 MS14M23G30 14 2.0-2.5 Gold 30" MP16M23F MS16M23F 18-16 .75-1.5 Gold Flash MP16M23G5 MS16M23G5 18-16 .75-1.5 Gold 5" MP16M23G10 MS16M23G10 18-16 .75-1.5 Gold 10" MP16M23G15 MS16M23G15 18-16 .75-1.5 Gold 15" MP16M23G30 MS16M23G30 18-16 .75-1.5 Gold 30" MP20M23F MS20M23F 22-20 .34-.50 Gold Flash MP20M23G5 MS20M23G5 22-20 .34-.50 Gold 5" MP20M23G10 MS20M23G10 22-20 .34-.50 Gold 10" MP20M23G15 MS20M23G15 22-20 .34-.50 Gold 15" MP20M23G30 MS20M23G30 22-20 .34-.50 Gold 30" MP24M23F MS24M23F 26-24 .14-.25 Gold Flash MP24M23G5 MS24M23G5 26-24 .14-.25 Gold 5" MP24M23G10 MS24M23G10 26-24 .14-.25 Gold 10" MP24M23G15 MS24M23G15 26-24 .14-.25 Gold 15" MP24M23G30 MS24M23G30 26-24 .14-.25 Gold 30" Contact Extraction Tool, #16 (O 1.6) Contact (mm) QXRT16 Hand Crimp Tool for Machined Contacts MFX-3959 Pneumatic Crimp Tool for Machined Contacts MFX-3960 8 POSITIONS 13A / 300V Number of Contacts: 8 Salt Spray: 48h Contact Size: 16 Connector Solutions Shell Size: 14 Sealing: IP67 Contacts (con't) Stamped & Formed Contacts Tools Crimp Contacts, Stamped & Formed Part Number AWG Wire Range Plating Male Female SP14M1F SS14M1F 14 2.0-2.5 Gold Flash SP14M1G5 SS14M1G5 14 2.0-2.5 Gold 5" SP14M1G10 SS14M1G10 14 2.0-2.5 Gold 10" SP14M1G15 SS14M1G15 14 2.0-2.5 Gold 15" SP14M1G30 SS14M1G30 14 2.0-2.5 Gold 30" SP16M1F SS16M1F 18-16 .75-1.5 Gold Flash SP16M1G5 SS16M1G5 18-16 .75-1.5 Gold 5" SP16M1G10 SS16M1G10 18-16 .75-1.5 Gold 10" SP16M1G15 SS16M1G15 18-16 .75-1.5 Gold 15" SP16M1G30 SS16M1G30 18-16 .75-1.5 Gold 30" SP20M1F SS20M1F 22-20 .34-.50 Gold Flash SP20M1G5 SS20M1G5 22-20 .34-.50 Gold 5" SP20M1G10 SS20M1G10 22-20 .34-.50 Gold 10" SP20M1G15 SS20M1G15 22-20 .34-.50 Gold 15" SP20M1G30 SS20M1G30 22-20 .34-.50 Gold 30" SP24M1F SS24M1F 22-20 .14-.25 Gold Flash SP24M1G5 SS24M1G5 26-24 .14-.25 Gold 5" SP24M1G10 SS24M1G10 26-24 .14-.25 Gold 10" SP24M1G15 SS24M1G15 26-24 .14-.25 Gold 15" SP24M1G30 SS24M1G30 26-24 .14-.25 Gold 30" Contact Extraction Tool, #16 (O 1.6) Contact (mm) QXRT16 Hand Tool, Stamped & Formed Contact, Size16, 20-14AWG MFX-3954 Crimp Die for Stamped & Formed Contact MFX-3957 93 STEP 1 Choose Receptacle Style STEP 2 Choose Plug Style STEP 2 Choose Backshell Style Jam Nut Receptacles RT07188PNH RT07188SNH SEE TABLE ON NEXT PAGE FOR PART DETAILS Plug RT07188PNHEC RT06188PNH RT0S18CGNS2 RT07188SNHEC OR Square Flange Receptacles RT06188SNH RT0L18CGNS1 RT06188PNHEC RT00188PNH RT0L18CGNS2 RT06188SNHEC RT00188SNH RT00188PNHEC RT00188SNHEC 94 RT0S18CGNS1 CONTACTS SOLD SEPARATELY SEE PAGE 100 Backshell 8 POSITIONS 23A / 375V Number of Contacts: 8 Salt Spray: 48h Contact Size: 2.5mm Connector Solutions Shell Size: 18 Sealing: IP67 eco|mate(R) rm Standard Products * Suitable For Indoor and Outdoor Applications * EMI/RMI Shielding Capability with Appropriate Backshell * Operating Temperature: -40C to +105C * 500 Mating Cycles * Contacts and Cord Grips Ordered Separately * UL ECBT2 Certified* An upgraded silicone seal is available for all connector parts. Please add "03" to the end of the part number when ordering. Operating Temperature: -40C to +125C. Not available in kits. Insert Arrangement Pin (Male) Faceview Connector Part Numbers Part Number Figure Drawings Connector Type Male Female Jam Nut Receptacle 1,5 2,5 RT07188SNHEC Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal** 3,5 4,5 RT06188PNH RT06188SNH Plug 6 7 RT06188PNHEC RT06188SNHEC Plug with O-ring Seal and End Cap with Individual Rear Wire Seal** 8 9 RT00188PNH RT00188SNH Square Flange Receptacle 10,14 11,14 RT00188PNHEC RT00188SNHEC Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal** 12,14 13,14 Male Female RT07188PNH RT07188SNH RT07188PNHEC Contacts supplied separately see page 100 **See page 97 for the real seal wire range Backshells Part Number Backshell Type Cable Range (mm) Figure Drawings Shielding RT0S18CGNS1 Short Cord Grip (straight) 9.0-14.5 15 RT0S18CGNS2 Short Cord Grip (straight) 13.5-17 15 RT0L18CGNS1 Long Cord Grip (straight) 9.0-14.5 16 RT0L18CGNS2 Long Cord Grip (straight) 13.5-17 16 *Connector parts with part numbers ending in EC (with an end cap) were not available for submittal at the time of UL certification. 95 Shell Size: 18 Sealing: IP67 Number of Contacts: 8 Salt Spray: 48h Contact Size: 2.5mm Dimensions Jam Nut Receptacle Jam Nut Receptacle Male Figure 1 Jam Nut Receptacle RT07188PNH Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 3 RT07188PNHEC Jam Nut Receptacle Panel Cutout Figure 5 96 Female Figure 2 RT07188SNH Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 4 RT07188SNHEC 8 POSITIONS 23A / 375V Number of Contacts: 8 Salt Spray: 48h Contact Size: 2.5mm Connector Solutions Shell Size: 18 Sealing: IP67 Dimensions Plug Plug Male Figure 6 Plug RT06188PNH Female Plug with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 8 RT06188PNHEC Figure 7 RT06188SNH Plug with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 9 RT06188SNHEC Individual Sealing Wire Range Contact Size Insulation Overall Diameter (min-max) Wire Range 2.5mm O3.3mm - O4.3mm 14 - 12 AWG 97 Shell Size: 18 Sealing: IP67 Number of Contacts: 8 Salt Spray: 48h Contact Size: 2.5mm Dimensions Square Flange Receptacle Square Flange Receptacle Male Figure 10 Square Flange Receptacle RT00188PNH Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 12 RT00188PNHEC Square Flange Receptacle Panel Cutout Figure 14 98 Female Figure 11 RT00188SNH Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 13 RT00188SNHEC 8 POSITIONS 23A / 375V Number of Contacts: 8 Salt Spray: 48h Contact Size: 2.5mm Dimensions Backshell Short Cord Grip (straight) Connector Solutions Shell Size: 18 Sealing: IP67 Figure 15 Long Cord Grip (straight) Figure 16 99 Shell Size: 18 Sealing: IP67 Number of Contacts: 8 Salt Spray: 48h Contact Size: 2.5mm Contacts Stamped & Formed Contacts Crimp Contacts, Stamped & Formed Part Number Male Female SP12A1T SS12A1T AWG Wire Range Plating 2.5-3.5 Tin (mm) 14-12 no machined contacts are available for this group Tools 100 Extraction Tool 2.5mm Contact Hand Tool, Stamped & Formed Contact, 2.5 mm QXRT12S MFX-3962 8 POSITIONS 23A / 375V Number of Contacts: 8 Salt Spray: 48h Contact Size: 2.5mm Accessories Plug Dustcap with Chain Plug Dustcap without Chain Receptacle Dustcap with Chain RT618DCG RT618DC RT018DCG Receptacle Dustcap with Nylon Cord, Made of Rubber Receptacle Dustcap without Chain Receptacle Dustcap without Nylon Cord, Rubber Material RT018RL RT018DC RB00011918 Sealing Plug Square Flange Receptacle Gaskets, Thickness 0.8mm (0.2) Locking Clip with Lanyard RTFD18B 108039118 CA401259 Connector Solutions Shell Size: 18 Sealing: IP67 NEW! See Page 16 101 STEP 1 Choose Receptacle Style STEP 2 Choose Plug Style STEP 2 Choose Backshell Style Jam Nut Receptacles RT071609PNH RT0S16CGNS1 RT071609SNH SEE TABLE ON NEXT PAGE FOR PART DETAILS Plug RT0S16CGNS2 RT07169PNHEC RT0L16CGNS1 RT061609PNH RT0L16CGNS2 RT061609PNHEC RT0B16CGNS1 RT061609SNHEC RT0B16CGNS2 RT07169SNHEC OR Square Flange Receptacles RT00169PNH RT00169SNH RT00169PNHEC RT00169SNHEC 102 RT061609SNH CONTACTS SOLD SEPARATELY SEE PAGE 108 Backshell 9 POSITIONS MIX 23A & 13A / 250V Number of Contacts: 9 Salt Spray: 48h Contact Size: Mixed 2.5mm & 16 Connector Solutions Shell Size: 16 Sealing: IP67 eco|mate(R) rm Standard Products * Suitable For Indoor and Outdoor Applications * EMI/RMI Shielding Capability with Appropriate Backshell * Operating Temperature: -40C to +105C * 500 Mating Cycles * Contacts and Cord Grips Ordered Separately * UL ECBT2 Certified* An upgraded silicone seal is available for all connector parts. Please add "03" to the end of the part number when ordering. Operating Temperature: -40C to +125C. Not available in kits. Insert Arrangement Pin (Male) Faceview Connector Part Numbers Part Number Figure Drawings Connector Type Male Female Jam Nut Receptacle with O-ring Seal 1,5 2,5 RT07169SNHEC Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal** 3,5 4,5 RT061609PNH RT061609SNH Plug with O-ring Seal 6 7 RT061609PNHEC RT061609SNHEC Plug with O-ring Seal and End Cap with Individual Rear Wire Seal** 8 9 RT00169PNH RT00169SNH Square Flange Receptacle with O-ring Seal 10,14 11,14 RT00169PNHEC RT00169SNHEC Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal** 12,14 13,14 Male Female RT071609PNH RT071609SNH RT07169PNHEC Backshells Contacts supplied separately see page 108 **See page 105 for the real seal wire range Part Number Backshell Type Cable Range (mm) Figure Drawings Shielding RT0S16CGNS1 Short Cord Grip (straight) 9.0-14.5 15 RT0S16CGNS2 Short Cord Grip (straight) 13.5-17 15 RT0L16CGNS1 Long Cord Grip (straight) 9.0-14.5 16 RT0L16CGNS2 Long Cord Grip (straight) 13.5-17 16 RT0B16CGNS1 Cord Grip (90) 9.5-14.5 17 RT0B16CGNS2 Cord Grip (90) 13.5-17.0 17 *Connector parts with part numbers ending in EC (with an end cap) were not available for submittal at the time of UL certification. 103 Shell Size: 16 Sealing: IP67 Number of Contacts: 9 Salt Spray: 48h Contact Size: Mixed 2.5mm & 16 Dimensions Jam Nut Receptacle Jam Nut Receptacle with O-ring Seal Male Figure 1 RT07169PNH Female Figure 2 RT07169SNH Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Male Female Figure 3 RT07169PNHEC Jam Nut Receptacle Panel Cutout Figure 5 104 Jam Nut Receptacle with O-ring Seal Figure 4 RT07169SNHEC 9 POSITIONS MIX 23A & 13A / 250V Number of Contacts: 9 Salt Spray: 48h Contact Size: Mixed 2.5mm & 16 Connector Solutions Shell Size: 16 Sealing: IP67 Dimensions Plug Plug with O-ring Seal Male Figure 6 Plug with O-ring Seal RT06169PNH Female Plug with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 8 RT06169PNHEC Figure 7 RT06169SNH Plug with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 9 RT06169SNHEC Individual Sealing Wire Range Contact Size Insulation Overall Diameter (min-max) Wire Range 2.5mm O3.3mm - O4.3mm 14 - 12 AWG 16 O2.0mm - O3.2mm 14 - 24 AWG 105 Shell Size: 16 Sealing: IP67 Number of Contacts: 9 Salt Spray: 48h Contact Size: Mixed 2.5mm & 16 Dimensions Square Flange Receptacle Square Flange Receptacle with O-ring Seal Male Figure 10 RT00169PNH Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 12 RT00169PNHEC Square Flange Receptacle Panel Cutout Figure 14 106 Square Flange Receptacle with O-ring Seal Female Figure 11 RT00169SNH Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 13 RT00169SNHEC 9 POSITIONS MIX 23A & 13A / 250V Number of Contacts: 9 Salt Spray: 48h Contact Size: Mixed 2.5mm & 16 Connector Solutions Shell Size: 16 Sealing: IP67 Dimensions Backshell Short Cord Grip (straight) Figure 15 Long Cord Grip (straight) Figure 16 Cord Grip (90) Figure 17 Accessories Plug Dustcap with Chain Plug Dustcap without Chain Receptacle Dustcap with Chain Receptacle Dustcap with Nylon Cord, Made of Rubber RT616DCG RT616DC RT016DCG RT016RL Receptacle Dustcap without Chain Receptacle Dustcap without Nylon Cord, Rubber Material Sealing Plug Sealing Plug RT016DC RB00011916 CA401659 CA401259 Square Flange Receptacle Gaskets, Thickness 0.8mm (0.2) Locking Clip with Lanyard RTFD16B 108039116 NEW! See Page 16 107 Shell Size: 16 Sealing: IP67 Number of Contacts: 9 Salt Spray: 48h Contact Size: Mixed 2.5mm & 16 Contacts Machined Contacts Tools Crimp Contacts, Machined Part Number 108 Male Female Contact Size MP14M23F MS14M23F 16 14 2.0-2.5 Gold Flash MP14M23G5 MS14M23G5 16 14 2.0-2.5 Gold 5" MP14M23G10 MS14M23G10 16 14 2.0-2.5 Gold 10" MP14M23G15 MS14M23G15 16 14 2.0-2.5 Gold 15" MP14M23G30 MS14M23G30 16 14 2.0-2.5 Gold 30" MP16M23F MS16M23F 16 18-16 .75-1.5 Gold Flash MP16M23G5 MS16M23G5 16 18-16 .75-1.5 Gold 5" MP16M23G10 MS16M23G10 16 18-16 .75-1.5 Gold 10" MP16M23G15 MS16M23G15 16 18-16 .75-1.5 Gold 15" MP16M23G30 MS16M23G30 16 18-16 .75-1.5 Gold 30" MP20M23F MS20M23F 16 22-20 .34-.50 Gold Flash MP20M23G5 MS20M23G5 16 22-20 .34-.50 Gold 5" MP20M23G10 MS20M23G10 16 22-20 .34-.50 Gold 10" MP20M23G15 MS20M23G15 16 22-20 .34-.50 Gold 15" MP20M23G30 MS20M23G30 16 22-20 .34-.50 Gold 30" MP24M23F MS24M23F 16 26-24 .14-.25 Gold Flash MP24M23G5 MS24M23G5 16 26-24 .14-.25 Gold 5" MP24M23G10 MS24M23G10 16 26-24 .14-.25 Gold 10" MP24M23G15 MS24M23G15 16 26-24 .14-.25 Gold 15" MP24M23G30 MS24M23G30 16 26-24 .14-.25 Gold 30" AWG Wire Range Plating Contact Extraction Tool, #16 (O 1.6) Contact (mm) QXRT16 Hand Crimp Tool for Machined Contacts MFX-3959 Pneumatic Crimp Tool for Machined Contacts MFX-3960 9 POSITIONS MIX 23A & 13A / 250V Number of Contacts: 9 Salt Spray: 48h Contact Size: Mixed 2.5mm & 16 Connector Solutions Shell Size: 16 Sealing: IP67 Contacts (con't) 2.5mm Tools Stamped & Formed Contacts Extraction Tool 2.5mm Contact Crimp Contacts, Stamped & Formed Part Number Male Female Contact Size SP12A1T SS12A1T 2.5mm SP14M1F SS14M1F SP14M1G5 Wire Range Plating 14-12 2.0-2.5 Tin 16 14 2.0-2.5 Gold Flash SS14M1G5 16 14 2.0-2.5 Gold 5" SP14M1G10 SS14M1G10 16 14 2.0-2.5 Gold 10" SP14M1G15 SS14M1G15 16 14 2.0-2.5 Gold 15" SP14M1G30 SS14M1G30 16 14 2.0-2.5 Gold 30" SP16M1F SS16M1F 16 18-16 .75-1.5 Gold Flash SP16M1G5 SS16M1G5 16 18-16 .75-1.5 Gold 5" SP16M1G10 SS16M1G10 16 18-16 .75-1.5 Gold 10" SP16M1G15 SS16M1G15 16 18-16 .75-1.5 Gold 15" SP16M1G30 SS16M1G30 16 18-16 .75-1.5 Gold 30" SP20M1F SS20M1F 16 22-20 .34-.50 Gold Flash SP20M1G5 SS20M1G5 16 22-20 .34-.50 Gold 5" SP20M1G10 SS20M1G10 16 22-20 .34-.50 Gold 10" SP20M1G15 SS20M1G15 16 22-20 .34-.50 Gold 15" SP20M1G30 SS20M1G30 16 22-20 .34-.50 Gold 30" SP24M1F SS24M1F 16 22-20 .14-.25 Gold Flash SP24M1G5 SS24M1G5 16 26-24 .14-.25 Gold 5" SP24M1G10 SS24M1G10 16 26-24 .14-.25 Gold 10" SP24M1G15 SS24M1G15 16 26-24 .14-.25 Gold 15" SP24M1G30 SS24M1G30 16 26-24 .14-.25 Gold 30" AWG (mm) QXRT12S Contact Extraction Tool, #16 (O 1.6) Contact QXRT16 Crimp Die for Stamped & Formed Contact MFX-3957 Hand Tool, Stamped & Formed Contact, 2.5 mm MFX-3962 Hand Tool, Stamped & Formed Contact, Size 16, 20-14AWG MFX-3954 109 STEP 1 Choose Receptacle Style STEP 2 Choose Plug Style STEP 2 Choose Backshell Style Jam Nut Receptacles RT0W71210PNH RT0S12CGNS1 RT0W71210SNH SEE TABLE ON NEXT PAGE FOR PART DETAILS Plug RT0S12CGNS2 RT0W71210PNHEC RT0W61210PNH RT0L12CGNS1 RT0W61210SNH RT0L12CGNS2 RT0W61210PNHEC RT0B12CGNS1 RT0W61210SNHEC RT0B12CGNS2 RT0W71210SNHEC OR Square Flange Receptacles RT0W01210PNH RT0W01210SNH OR RT0W01210PNHEC RT0W01210SNHEC 110 Square Flange Receptacle Kit Including Receptacle,Gasket & Contacts Plug Kit Including Connector, Backshell & Contacts CONTACTS SOLD SEPARATELY SEE PAGE 116 Backshell Jam Nut Receptacle Kit Including Receptacle & Contacts 10 POSITIONS 5A / 150V Number of Contacts: 10 Salt Spray: 48h Contact Size: 20 Connector Solutions Shell Size: 12 Sealing: IP67 eco|mate(R) rm Standard Products * Suitable For Indoor and Outdoor Applications * EMI/RMI Shielding Capability with Appropriate Backshell * Operating Temperature: -40C to +105C * 500 Mating Cycles * Contacts and Cord Grips Ordered Separately * UL ECBT2 Certified* An upgraded silicone seal is available for all connector parts. Please add "03" to the end of the part number when ordering. Operating Temperature: -40C to +125C. Not available in kits. Insert Arrangement Pin (Male) Faceview Connector Part Numbers Part Number Male Female RT0W71210PNH RT0W71210SNH Figure Drawings Connector Type RT0W71210PNHEC RT0W71210SNHEC Male Female Jam Nut Receptacle 1,5 2,5 Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal** 3,5 4,5 RT0W71210PNHK RT0W71210SNHK Jam Nut Receptacle Kit 1,5 2,5 RT0W61210PNH RT0W61210SNH Plug 6 7 Plug with O-ring Seal and End Cap with Individual Rear Wire Seal** 8 9 RT0W61210PNHEC RT0W61210SNHEC RT0W61210PNHK RT0W61210SNHK Plug Kit 6 7 RT0W01210PNH RT0W01210SNH Square Flange Receptacle 10,14 11,14 Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal** 12,14 13,14 Square Flange Receptacle Kit 10,14 11,14 RT0W01210PNHEC RT0W01210SNHEC RT0W01210PNHK Backshells RT0W01210SNHK Contacts supplied separately see page 116 **See page 113 for the real seal wire range Part Number Backshell Type Cable Range (mm) Figure Drawings Shielding RT0S12CGNS1 Short Cord Grip (straight) 6-10.5 15 RT0S12CGNS2 Short Cord Grip (straight) 8.5-12.5 15 RT0L12CGNS1 Long Cord Grip (straight) 6-10.5 16 RT0L12CGNS2 Long Cord Grip (straight) 8.5-12.5 16 RT0B12CGNS1 Cord Grip (90) 6-10.5 17 RT0B12CGNS2 Cord Grip (90) 8.0-12.5 17 *Connector parts with part numbers ending in EC (with an end cap) were not available for submittal at the time of UL certification. 111 Shell Size: 12 Sealing: IP67 Number of Contacts: 10 Salt Spray: 48h Contact Size: 20 Dimensions Jam Nut Receptacle Jam Nut Receptacle Male Figure 1 Jam Nut Receptacle RT0W71210PNH Figure 2 RT0W71210SNH Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Male Female Figure 3 RT0W71210PNHEC Jam Nut Receptacle Panel Cutout Figure 5 112 Female Figure 4 RT0W71210SNHEC 10 POSITIONS 5A / 150V Number of Contacts: 10 Salt Spray: 48h Contact Size: 20 Connector Solutions Shell Size: 12 Sealing: IP67 Dimensions Plug Plug Male Figure 6 Plug RT0W61210PNH Female Plug with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 8 RT0W61210PNHEC Figure 7 RT0W61210SNH Plug with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 9 RT0W61210SNHEC Individual Sealing Wire Range Contact Size Insulation Overall Diameter (min-max) Wire Range 20 O1.6mm - O2.6mm 20 - 30 AWG 113 Shell Size: 12 Sealing: IP67 Number of Contacts: 10 Salt Spray: 48h Contact Size: 20 Dimensions Square Flange Receptacle Square Flange Receptacle Male Figure 10 RT0W01210PNH Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 12 RT0W01210PNHEC Square Flange Receptacle Panel Cutout Figure 14 114 Square Flange Receptacle Female Figure 11 RT0W01210SNH Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 13 RT0W01210SNHEC 10 POSITIONS 5A / 150V Number of Contacts: 10 Salt Spray: 48h Contact Size: 20 Connector Solutions Shell Size: 12 Sealing: IP67 Dimensions Backshell Short Cord Grip (straight) Figure 15 Long Cord Grip (straight) Figure 16 Cord Grip (90) Figure 17 Accessories Locking Clip with Lanyard Plug Dustcap with Chain Plug Dustcap without Chain Receptacle Dustcap with Chain 108039112 RT612DCG RT612DC RT012DCG Receptacle Dustcap with Nylon Cord, Made of Rubber Receptacle Dustcap without Chain Receptacle Dustcap without Nylon Cord, Rubber Material Sealing Plug RT012RL RT012DC RB00011912 CA402059 NEW! See Page 16 Square Flange Receptacle Gaskets, Thickness 0.8mm (0.2) RTFD12B 115 Shell Size: 12 Sealing: IP67 Number of Contacts: 10 Salt Spray: 48h Contact Size: 20 Contacts Machined Contacts Tools Crimp Contacts, Machined Part Number 116 AWG Wire Ranget Plating Male Female MP20W23F MS20W23F 22-20 .34-.50 Gold Flash MP20W23G5 MS20W23G5 22-20 .34-.50 Gold 5" MP20W23G10 MS20W23G10 22-20 .34-.50 Gold 10" MP20W23G15 MS20W23G15 22-20 .34-.50 Gold 15" MP20W23G30 MS20W23G30 22-20 .34-.50 Gold 30" MP24W23F MS24W23F 26-24 .13-.25 Gold Flash MP24W23G5 MS24W23G5 26-24 .13-.25 Gold 5" MP24W23G10 MS24W23G10 26-24 .13-.25 Gold 10" MP24W23G15 MS24W23G15 26-24 .13-.25 Gold 15" MP24W23G30 MS24W23G30 26-24 .13-.25 Gold 30" MP28W23F MS28W23F 30-28 .05-.08 Gold Flash MP28W23G5 MS28W23G5 30-28 .05-.08 Gold 5" MP28W23G10 MS28W23G10 30-28 .05-.08 Gold 10" MP28W23G15 MS28W23G15 30-28 .05-.08 Gold 15" MP28W23G30 MS28W23G30 30-28 .05-.08 Gold 30" Contact Extraction Tool, #20 (O 1.6) Contact (mm) QXRT20 Hand Crimp Tool for Machined Contacts MFX-3959 Pneumatic Crimp Tool for Machined Contact MFX-3960 10 POSITIONS 5A / 150V Number of Contacts: 10 Salt Spray: 48h Contact Size: 20 Connector Solutions Shell Size: 12 Sealing: IP67 Contacts (con't) Stamped & Formed Contacts Tools Crimp Contacts, Stamped & Formed Part Number AWG Wire Range Plating Male Female SP20W1F SS20W1F 22-20 .34-.50 Gold Flash SP20W1G5 SS20W1G5 22-20 .34-.50 Gold 5" SP20W1G10 SS20W1G10 22-20 .34-.50 Gold 10" SP20W1G15 SS20W1G15 22-20 .34-.50 Gold 15" SP20W1G30 SS20W1G30 22-20 .34-.50 Gold 30" SP24W1F SS24W1F 26-24 .14-.25 Gold Flash SP24W1G5 SS24W1G5 26-24 .14-.25 Gold 5" SP24W1G10 SS24W1G10 26-24 .14-.25 Gold 10" SP24W1G15 SS24W1G15 26-24 .14-.25 Gold 15" SP24W1G30 SS24W1G30 26-24 .14-.25 Gold 30" SP28W1F SS28W1F 30-28 .05-.08 Gold Flash SP28W1G5 SS28W1G5 30-28 .05-.08 Gold 5" SP28W1G10 SS28W1G10 30-28 .05-.08 Gold 10" SP28W1G15 SS28W1G15 30-28 .05-.08 Gold 15" SP28W1G30 SS28W1G30 30-28 .05-.08 Gold 30" Contact Extraction Tool, #20 (O 1.6) Contact (mm) QXRT20 Hand Tool, Stamped & Formed Contact, Size 20, 20-28AWG MFX-3958 Crimp Die for Stamped & Formed Contact MFX-3957 117 STEP 1 Choose Receptacle Style STEP 2 Choose Plug Style STEP 2 Choose Backshell Style Jam Nut Receptacles RT0S14CGNS1 RT071412SNH SEE TABLE ON NEXT PAGE FOR PART DETAILS Plug RT0S14CGNS2 RT071412PNHEC RT061412PNH RT0L14CGNS1 RT071412SNHEC OR Square Flange Receptacles RT061412SNH RT061412PNHEC RT0L14CGNS2 RT0B14CGNS1 RT001412PNH RT061412SNHEC RT0B14CGNS2 RT001412SNH OR RT001412PNHEC RT001412SNHEC 118 Square Flange Receptacle Kit Including Receptacle,Gasket & Contacts Plug Kit Including Connector, Backshell & Contacts CONTACTS SOLD SEPARATELY SEE PAGE 124 RT071412PNH Backshell Jam Nut Receptacle Kit Including Receptacle & Contacts 12 POSITIONS 13A / 300V Number of Contacts: 12 Salt Spray: 48h Contact Size: 16 Connector Solutions Shell Size: 14 Sealing: IP67 eco|mate(R) rm Standard Products * Suitable For Indoor and Outdoor Applications * EMI/RMI Shielding Capability with Appropriate Backshell * Operating Temperature: -40C to +105C * 500 Mating Cycles * Contacts and Cord Grips Ordered Separately * UL ECBT2 Certified* An upgraded silicone seal is available for all connector parts. Please add "03" to the end of the part number when ordering. Operating Temperature: -40C to +125C. Not available in kits. Insert Arrangement Pin (Male) Faceview Connector Part Numbers Part Number Figure Drawings Connector Type Male Female Jam Nut Receptacle 1,5 2,5 RT071412SNHEC Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal** 3,5 4,5 RT071412PNHK RT071412SNHK Jam Nut Receptacle Kit 1,5 2,5 RT061412PNH RT061412SNH Plug 6 7 RT061412PNHEC RT061412SNHEC Plug with O-ring Seal and End Cap with Individual Rear Wire Seal** 8 9 RT061412PNHK RT061412SNHK Plug Kit 6 7 RT001412PNH RT001412SNH Square Flange Receptacle 10,14 11,14 RT001412PNHEC RT001412SNHEC Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal** 12,14 13,14 RT001412PNHK RT001412SNHK Square Flange Receptacle Kit 10,14 11,14 Male Female RT071412PNH RT071412SNH RT071412PNHEC Backshells Contacts supplied separately see page 124 **See page 121 for the real seal wire range Part Number Backshell Type Cable Range (mm) Figure Drawings Shielding RT0S14CGNS1 Short Cord Grip (straight) 6-10.5 15 RT0S14CGNS2 Short Cord Grip (straight) 8.5-12.5 15 RT0L14CGNS1 Long Cord Grip (straight) 6-10.5 16 RT0L14CGNS2 Long Cord Grip (straight) 8.5-12.5 16 RT0B14CGNS1 Cord Grip (90) 6-10.5 17 RT0B14CGNS2 Cord Grip (90) 8.0-12.5 17 *Connector parts with part numbers ending in EC (with an end cap) were not available for submittal at the time of UL certification. 119 Shell Size: 14 Sealing: IP67 Number of Contacts: 12 Salt Spray: 48h Contact Size: 16 Dimensions Jam Nut Receptacle Jam Nut Receptacle Male Figure 1 Jam Nut Receptacle RT071412PNH Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 3 RT071412PNHEC Jam Nut Receptacle Panel Cutout Figure 5 120 Female Figure 2 RT071412SNH Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 4 RT071412SNHEC 12 POSITIONS 13A / 300V Number of Contacts: 12 Salt Spray: 48h Contact Size: 16 Connector Solutions Shell Size: 14 Sealing: IP67 Dimensions Plug Plug Male Figure 6 Plug RT061412PNH Female Plug with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 8 Figure 7 RT061412SNH Plug with O-ring Seal and End Cap with Individual Rear Wire Seal RT061412PNHEC Female Figure 9 RT061412SNHEC Individual Sealing Wire Range Contact Size Insulation Overall Diameter (min-max) Wire Range 16 O2.0mm - O3.2mm 14 - 24 AWG 121 Shell Size: 14 Sealing: IP67 Number of Contacts: 12 Salt Spray: 48h Contact Size: 16 Dimensions Square Flange Receptacle Square Flange Receptacle Male Figure 10 Square Flange Receptacle RT001412PNH Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 12 RT001412PNHEC Square Flange Receptacle Panel Cutout Figure 14 122 Female Figure 11 RT001412SNH Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 13 RT001412SNHEC 12 POSITIONS 13A / 300V Number of Contacts: 12 Salt Spray: 48h Contact Size: 16 Connector Solutions Shell Size: 14 Sealing: IP67 Dimensions Backshell Short Cord Grip (straight) Figure 15 Long Cord Grip (straight) Figure 16 Cord Grip (90) Figure 17 Accessories Locking Clip with Lanyard Plug Dustcap with Chain Plug Dustcap without Chain Receptacle Dustcap with Chain 108039114 RT614DCG RT614DC RT014DCG Receptacle Dustcap with Nylon Cord, Made of Rubber Receptacle Dustcap without Chain Receptacle Dustcap without Nylon Cord, Rubber Material Sealing Plug RT014RL RT014DC RB00011914 CA401659 NEW! See Page 16 Square Flange Receptacle Gaskets, Thickness 0.8mm (0.2) RTFD14B 123 Shell Size: 14 Sealing: IP67 Number of Contacts: 12 Salt Spray: 48h Contact Size: 16 Contacts Machined Contacts Tools Crimp Contacts, Machined Part Number 124 AWG Wire Range Plating Male Female MP14M23F MS14M23F 14 2.0-2.5 Gold Flash MP14M23G5 MS14M23G5 14 2.0-2.5 Gold 5" MP14M23G10 MS14M23G10 14 2.0-2.5 Gold 10" MP14M23G15 MS14M23G15 14 2.0-2.5 Gold 15" MP14M23G30 MS14M23G30 14 2.0-2.5 Gold 30" MP16M23F MS16M23F 18-16 .75-1.5 Gold Flash MP16M23G5 MS16M23G5 18-16 .75-1.5 Gold 5" MP16M23G10 MS16M23G10 18-16 .75-1.5 Gold 10" MP16M23G15 MS16M23G15 18-16 .75-1.5 Gold 15" MP16M23G30 MS16M23G30 18-16 .75-1.5 Gold 30" MP20M23F MS20M23F 22-20 .34-.50 Gold Flash MP20M23G5 MS20M23G5 22-20 .34-.50 Gold 5" MP20M23G10 MS20M23G10 22-20 .34-.50 Gold 10" MP20M23G15 MS20M23G15 22-20 .34-.50 Gold 15" MP20M23G30 MS20M23G30 22-20 .34-.50 Gold 30" MP24M23F MS24M23F 26-24 .14-.25 Gold Flash MP24M23G5 MS24M23G5 26-24 .14-.25 Gold 5" MP24M23G10 MS24M23G10 26-24 .14-.25 Gold 10" MP24M23G15 MS24M23G15 26-24 .14-.25 Gold 15" MP24M23G30 MS24M23G30 26-24 .14-.25 Gold 30" Contact Extraction Tool, #16 (O 1.6) Contact (mm) QXRT16 Hand Crimp Tool for Machined Contacts MFX-3959 Pneumatic Crimp Tool for Machined Contacts MFX-3960 12 POSITIONS 13A / 300V Number of Contacts: 12 Salt Spray: 48h Contact Size: 16 Connector Solutions Shell Size: 14 Sealing: IP67 Contacts (con't) Stamped & Formed Contacts Crimp Contacts, Stamped & Formed Part Number AWG Tools Wire Range Plating Male Female SP14M1F SS14M1F 14 2.0-2.5 Gold Flash SP14M1G5 SS14M1G5 14 2.0-2.5 Gold 5" SP14M1G10 SS14M1G10 14 2.0-2.5 Gold 10" SP14M1G15 SS14M1G15 14 2.0-2.5 Gold 15" SP14M1G30 SS14M1G30 14 2.0-2.5 Gold 30" SP16M1F SS16M1F 18-16 .75-1.5 Gold Flash SP16M1G5 SS16M1G5 18-16 .75-1.5 Gold 5" SP16M1G10 SS16M1G10 18-16 .75-1.5 Gold 10" SP16M1G15 SS16M1G15 18-16 .75-1.5 Gold 15" SP16M1G30 SS16M1G30 18-16 .75-1.5 Gold 30" SP20M1F SS20M1F 22-20 .34-.50 Gold Flash SP20M1G5 SS20M1G5 22-20 .34-.50 Gold 5" SP20M1G10 SS20M1G10 22-20 .34-.50 Gold 10" SP20M1G15 SS20M1G15 22-20 .34-.50 Gold 15" SP20M1G30 SS20M1G30 22-20 .34-.50 Gold 30" SP24M1F SS24M1F 22-20 .14-.25 Gold Flash SP24M1G5 SS24M1G5 26-24 .14-.25 Gold 5" SP24M1G10 SS24M1G10 26-24 .14-.25 Gold 10" SP24M1G15 SS24M1G15 26-24 .14-.25 Gold 15" SP24M1G30 SS24M1G30 26-24 .14-.25 Gold 30" Contact Extraction Tool, #16 (O 1.6) Contact (mm) QXRT16 Hand Tool, Stamped & Formed Contact, Size 16, 20-14AWG MFX-3954 Crimp Die for Stamped & Formed Contact MFX-3957 125 STEP 1 Choose Receptacle Style STEP 2 Choose Plug Style STEP 2 Choose Backshell Style Jam Nut Receptacles RT0W71419PNH RT0S14CGNS1 RT0W71419SNH SEE TABLE ON NEXT PAGE FOR PART DETAILS Plug RT0S14CGNS2 RT0W71419PNHEC RT0W61419PNH RT0W71419SNHEC RT0L14CGNS1 OR Square Flange Receptacles RT0W61419SNH RT0W61419PNHEC RT0L14CGNS2 RT0B14CGNS1 RT0W01419PNH RT0W61419SNHEC RT0B14CGNS2 RT0W01419SNH OR RT0W01419PNHEC RT0W01419SNHEC 126 Square Flange Receptacle Kit Including Receptacle,Gasket & Contacts Plug Kit Including Connector, Backshell & Contacts CONTACTS SOLD SEPARATELY SEE PAGE 132 Backshell Jam Nut Receptacle Kit Including Receptacle & Contacts 19 POSITIONS 5A, 7.5A / 150V Number of Contacts: 19 Salt Spray: 48h Contact Size: 20 Connector Solutions Shell Size: 14 Sealing: IP67 eco|mate(R) rm Standard Products * Suitable For Indoor and Outdoor Applications * EMI/RMI Shielding Capability with Appropriate Backshell * Operating Temperature: -40C to +105C * 500 Mating Cycles * Contacts and Cord Grips Ordered Separately * UL ECBT2 Certified* An upgraded silicone seal is available for all connector parts. Please add "03" to the end of the part number when ordering. Operating Temperature: -40C to +125C. Not available in kits. Insert Arrangement Pin (Male) Faceview Connector Part Numbers Part Number Figure Drawings Connector Type Male Female Jam Nut Receptacle 1,5 2,5 RT0W71419SNHEC Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal** 3,5 4,5 RT0W71419PNHK RT0W71419SNHK Jam Nut Receptacle Kit 1,5 2,5 RT0W61419PNH RT0W61419SNH Plug 6 7 RT0W61419PNHEC RT0W61419SNHEC Plug with O-ring Seal and End Cap with Individual Rear Wire Seal** 8 9 RT0W61419PNHK RT0W61419SNHK Plug Kit 1,5 2,5 RT0W01419PNH RT0W01419SNH Square Flange Receptacle 10,14 11,14 RT0W01419PNHEC RT0W01419SNHEC Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal** 12,14 13,14 RT0W01419PNHK RT0W01419SNHK Square Flange Receptacle Kit 10,14 11,14 Male Female RT0W71419PNH RT0W71419SNH RT0W71419PNHEC Backshells Contacts supplied separately see page 132 **See page 129 for the real seal wire range Part Number Backshell Type Cable Range (mm) Figure Drawings Shielding RT0S14CGNS1 Short Cord Grip (straight) 6-10.5 15 RT0S14CGNS2 Short Cord Grip (straight) 8.5-12.5 15 RT0L14CGNS1 Long Cord Grip (straight) 6-10.5 16 RT0L14CGNS2 Long Cord Grip (straight) 8.5-12.5 16 RT0B14CGNS1 Cord Grip (90) 6-10.5 17 RT0B14CGNS2 Cord Grip (90) 8.0-12.5 17 *Connector parts with part numbers ending in EC (with an end cap) were not available for submittal at the time of UL certification. 127 Shell Size: 14 Sealing: IP67 Number of Contacts: 19 Salt Spray: 48h Contact Size: 20 Dimensions Jam Nut Receptacle Jam Nut Receptacle Male Figure 1 Jam Nut Receptacle RT0W71419PNH Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 3 RT0W71419PNHEC Jam Nut Receptacle Panel Cutout Figure 5 128 Female Figure 2 RT0W71419SNH Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 4 RT0W71419SNHEC 19 POSITIONS 5A, 7.5A / 150V Number of Contacts: 19 Salt Spray: 48h Contact Size: 20 Connector Solutions Shell Size: 14 Sealing: IP67 Dimensions Plug Plug Male Figure 6 Plug RT0W61419PNH Female Plug with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 8 Figure 7 RT0W61419SNH Plug with O-ring Seal and End Cap with Individual Rear Wire Seal RT0W61419PNHEC Female Figure 9 RT0W61419SNHEC Individual Sealing Wire Range Contact Size Insulation Overall Diameter (min-max) Wire Range 20 O1.6mm - O2.6mm 20 - 30 AWG 129 Shell Size: 14 Sealing: IP67 Number of Contacts: 19 Salt Spray: 48h Contact Size: 20 Dimensions Square Flange Receptacle Square Flange Receptacle Male Figure 10 RT0W01419PNH Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 12 RT0W01419PNHEC Square Flange Receptacle Panel Cutout Figure 14 130 Square Flange Receptacle Female Figure 11 RT0W01419SNH Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 13 RT0W01419SNHEC 19 POSITIONS 5A, 7.5A / 150V Number of Contacts: 19 Salt Spray: 48h Contact Size: 20 Connector Solutions Shell Size: 14 Sealing: IP67 Dimensions Backshell Short Cord Grip (straight) Figure 15 Long Cord Grip (straight) Figure 16 Cord Grip (90) Figure 17 Accessories Locking Clip with Lanyard Plug Dustcap with Chain Plug Dustcap without Chain Receptacle Dustcap with Chain 108039114 RT614DCG RT614DC RT014DCG Receptacle Dustcap with Nylon Cord, Made of Rubber Receptacle Dustcap without Chain Receptacle Dustcap without Nylon Cord, Rubber Material Sealing Plug RT014RL RT014DC RB00011914 CA402059 NEW! See Page 16 Square Flange Receptacle Gaskets, Thickness 0.8mm (0.2) RTFD14B 131 Shell Size: 14 Sealing: IP67 Number of Contacts: 19 Salt Spray: 48h Contact Size: 20 Contacts Machined Contacts Tools Crimp Contacts, Machined (7.5A Max) Part Number 132 AWG Wire Range Plating Contact Extraction Tool, #20 (O 1.0) Contact Male Female MP20W23F MS20W23F 22-20 .34-.50 Gold Flash MP20W23G5 MS20W23G5 22-20 .34-.50 Gold 5" MP20W23G10 MS20W23G10 22-20 .34-.50 Gold 10" MP20W23G15 MS20W23G15 22-20 .34-.50 Gold 15" MP20W23G30 MS20W23G30 22-20 .34-.50 Gold 30" MP24W23F MS24W23F 26-24 .13-.25 Gold Flash MP24W23G5 MS24W23G5 26-24 .13-.25 Gold 5" MP24W23G10 MS24W23G10 26-24 .13-.25 Gold 10" MP24W23G15 MS24W23G15 26-24 .13-.25 Gold 15" MFX-3959 MP24W23G30 MS24W23G30 26-24 .13-.25 Gold 30" Pneumatic Crimp Tool for Machined Contact MP28W23F MS28W23F 30-28 .05-.08 Gold Flash MP28W23G5 MS28W23G5 30-28 .05-.08 Gold 5" MP28W23G10 MS28W23G10 30-28 .05-.08 Gold 10" MP28W23G15 MS28W23G15 30-28 .05-.08 Gold 15" MP28W23G30 MS28W23G30 30-28 .05-.08 Gold 30" (mm) QXRT20 Hand Crimp Tool for Machined Contacts MFX-3960 19 POSITIONS 5A & 7.5A / 150V Number of Contacts: 19 Salt Spray: 48h Contact Size: 20 Connector Solutions Shell Size: 14 Sealing: IP67 Contacts (con't) Stamped & Formed Contacts Crimp Contacts, Stamped & Formed (5A Max) Part Number AWG Wire Range Plating Male Female SP20W1F SS20W1F 22-20 .34-.50 Gold Flash SP20W1G5 SS20W1G5 22-20 .34-.50 Gold 5" SP20W1G10 SS20W1G10 22-20 .34-.50 Gold 10" SP20W1G15 SS20W1G15 22-20 .34-.50 Gold 15" SP20W1G30 SS20W1G30 22-20 .34-.50 Gold 30" SP24W1F SS24W1F 26-24 .14-.25 Gold Flash SP24W1G5 SS24W1G5 26-24 .14-.25 Gold 5" SP24W1G10 SS24W1G10 26-24 .14-.25 Gold 10" SP24W1G15 SS24W1G15 26-24 .14-.25 Gold 15" SP24W1G30 SS24W1G30 26-24 .14-.25 Gold 30" SP28W1F SS28W1F 30-28 .05-.08 Gold Flash SP28W1G5 SS28W1G5 30-28 .05-.08 Gold 5" SP28W1G10 SS28W1G10 30-28 .05-.08 Gold 10" SP28W1G15 SS28W1G15 30-28 .05-.08 Gold 15" SP28W1G30 SS28W1G30 30-28 .05-.08 Gold 30" Tools Contact Extraction Tool, #20 (O 1.0) Contact (mm) QXRT20 Hand Tool, Stamped & Formed Contact, Size 20, 20-28AWG MFX-3958 Crimp Die for Stamped & Formed Contact MFX-3957 133 STEP 1 Choose Receptacle Style STEP 2 Choose Plug Style STEP 2 Choose Backshell Style Jam Nut Receptacles RT071619PNH RT0S16CGNS1 RT071619SNH SEE TABLE ON NEXT PAGE FOR PART DETAILS Plug RT0S16CGNS2 RT071619PNHEC RT061619PNH RT0L16CGNS1 RT061619SNH RT0L16CGNS2 RT061619PNHEC RT0B16CGNS1 RT061619SNHEC RT0B16CGNS2 RT071619SNHEC OR Square Flange Receptacles RT001619PNH RT001619SNH OR RT001619PNHEC RT001619SNHEC 134 Square Flange Receptacle Kit Including Receptacle,Gasket & Contacts Plug Kit Including Connector, Backshell & Contacts CONTACTS SOLD SEPARATELY SEE PAGE 140 Backshell Jam Nut Receptacle Kit Including Receptacle & Contacts 19 POSITIONS 13A / 300V Number of Contacts: 19 Salt Spray: 48h Contact Size: 16 Connector Solutions Shell Size: 16 Sealing: IP67 eco|mate(R) rm Standard Products * Suitable For Indoor and Outdoor Applications * EMI/RMI Shielding Capability with Appropriate Backshell * Operating Temperature: -40C to +105C * 500 Mating Cycles * Contacts and Cord Grips Ordered Separately * UL ECBT2 Certified* An upgraded silicone seal is available for all connector parts. Please add "03" to the end of the part number when ordering. Operating Temperature: -40C to +125C. Not available in kits. Insert Arrangement Pin (Male) Faceview Connector Part Numbers Part Number Figure Drawings Connector Type Male Female Jam Nut Receptacle 1,5 2,5 RT071619SNHEC Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal** 3,5 4,5 RT071619PNHK RT071619SNHK Jam Nut Receptacle Kit 1,5 2,5 RT061619PNH RT061619SNH Plug 6 7 RT061619PNHEC RT061619SNHEC Plug with O-ring Seal and End Cap with Individual Rear Wire Seal** 8 9 RT061619PNHK RT061619SNHK Plug Kit 6 7 RT001619PNH RT001619SNH Square Flange Receptacle 10,14 11,14 RT001619PNHEC RT001619SNHEC Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal** 12,14 13,14 RT001619PNHK RT001619SNHK Square Flange Receptacle Kit 10,14 11,14 Male Female RT071619PNH RT071619SNH RT071619PNHEC Backshells Contacts supplied separately see page 140 **See page 137 for the real seal wire range Part Number Backshell Type Cable Range (mm) Figure Drawings Shielding RT0S16CGNS1 Short Cord Grip (straight) 9.0-14.5 15 RT0S16CGNS2 Short Cord Grip (straight) 13.5-17 15 RT0L16CGNS1 Long Cord Grip (straight) 9.0-14.5 16 RT0L16CGNS2 Long Cord Grip (straight) 13.5-17 16 RT0B16CGNS1 Cord Grip (90) 9.5-14.5 17 RT0B16CGNS2 Cord Grip (90) 13.5-17.0 17 *Connector parts with part numbers ending in EC (with an end cap) were not available for submittal at the time of UL certification. 135 Shell Size: 16 Sealing: IP67 Number of Contacts: 19 Salt Spray: 48h Contact Size: 16 Dimensions Jam Nut Receptacle Jam Nut Receptacle Male Figure 1 Jam Nut Receptacle RT071619PNH Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 3 RT071619PNHEC Jam Nut Receptacle Panel Cutout Figure 5 136 Female Figure 2 RT071619SNH Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 4 RT071619SNHEC 19 POSITIONS 13A / 300V Number of Contacts: 19 Salt Spray: 48h Contact Size: 16 Connector Solutions Shell Size: 16 Sealing: IP67 Dimensions Plug Plug Male Figure 6 Plug RT061619PNH Female Plug with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 8 RT061619PNHEC Figure 7 RT061619SNH Plug with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 9 RT061619SNHEC Individual Sealing Wire Range Contact Size Insulation Overall Diameter (min-max) Wire Range 16 O2.0mm - O3.2mm 14 - 24 AWG 137 Shell Size: 16 Sealing: IP67 Number of Contacts: 19 Salt Spray: 48h Contact Size: 16 Dimensions Square Flange Receptacle Square Flange Receptacle Male Figure 10 Square Flange Receptacle RT001619PNH Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 12 RT001619PNHEC Square Flange Receptacle Panel Cutout Figure 14 138 Female Figure 11 RT001619SNH Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 13 RT001619SNHEC 19 POSITIONS 13A / 300V Number of Contacts: 19 Salt Spray: 48h Contact Size: 16 Connector Solutions Shell Size: 16 Sealing: IP67 Dimensions Backshell Short Cord Grip (straight) Figure 15 Long Cord Grip (straight) Figure 16 Cord Grip (90) Figure 17 Accessories Locking Clip with Lanyard Plug Dustcap with Chain Plug Dustcap without Chain Receptacle Dustcap with Chain 108039116 RT616DCG RT616DC RT016DCG Receptacle Dustcap with Nylon Cord, Made of Rubber Receptacle Dustcap without Chain Receptacle Dustcap without Nylon Cord, Rubber Material Sealing Plug RT016RL RT016DC RB00011916 CA401659 NEW! See Page 16 Square Flange Receptacle Gaskets, Thickness 0.8mm (0.2) RTFD16B 139 Shell Size: 16 Sealing: IP67 Number of Contacts: 19 Salt Spray: 48h Contact Size: 16 Contacts Machined Contacts Tools Crimp Contacts, Machined Part Number 140 AWG Wire Range Plating Male Female MP14M23F MS14M23F 14 2.0-2.5 Gold Flash MP14M23G5 MS14M23G5 14 2.0-2.5 Gold 5" MP14M23G10 MS14M23G10 14 2.0-2.5 Gold 10" MP14M23G15 MS14M23G15 14 2.0-2.5 Gold 15" MP14M23G30 MS14M23G30 14 2.0-2.5 Gold 30" MP16M23F MS16M23F 18-16 .75-1.5 Gold Flash MP16M23G5 MS16M23G5 18-16 .75-1.5 Gold 5" MP16M23G10 MS16M23G10 18-16 .75-1.5 Gold 10" MP16M23G15 MS16M23G15 18-16 .75-1.5 Gold 15" MP16M23G30 MS16M23G30 18-16 .75-1.5 Gold 30" MP20M23F MS20M23F 22-20 .34-.50 Gold Flash MP20M23G5 MS20M23G5 22-20 .34-.50 Gold 5" MP20M23G10 MS20M23G10 22-20 .34-.50 Gold 10" MP20M23G15 MS20M23G15 22-20 .34-.50 Gold 15" MP20M23G30 MS20M23G30 22-20 .34-.50 Gold 30" MP24M23F MS24M23F 26-24 .14-.25 Gold Flash MP24M23G5 MS24M23G5 26-24 .14-.25 Gold 5" MP24M23G10 MS24M23G10 26-24 .14-.25 Gold 10" MP24M23G15 MS24M23G15 26-24 .14-.25 Gold 15" MP24M23G30 MS24M23G30 26-24 .14-.25 Gold 30" Contact Extraction Tool, #16 (O 1.6) Contact (mm) QXRT16 Hand Crimp Tool for Machined Contacts MFX-3959 Pneumatic Crimp Tool for Machined Contacts MFX-3960 19 POSITIONS 13A / 300V Number of Contacts: 19 Salt Spray: 48h Contact Size: 16 Connector Solutions Shell Size: 16 Sealing: IP67 Contacts (con't) Stamped & Formed Contacts Tools Crimp Contacts, Stamped & Formed Part Number AWG Wire Range Plating Male Female SP14M1F SS14M1F 14 2.0-2.5 Gold Flash SP14M1G5 SS14M1G5 14 2.0-2.5 Gold 5" SP14M1G10 SS14M1G10 14 2.0-2.5 Gold 10" SP14M1G15 SS14M1G15 14 2.0-2.5 Gold 15" SP14M1G30 SS14M1G30 14 2.0-2.5 Gold 30" SP16M1F SS16M1F 18-16 .75-1.5 Gold Flash SP16M1G5 SS16M1G5 18-16 .75-1.5 Gold 5" SP16M1G10 SS16M1G10 18-16 .75-1.5 Gold 10" SP16M1G15 SS16M1G15 18-16 .75-1.5 Gold 15" SP16M1G30 SS16M1G30 18-16 .75-1.5 Gold 30" SP20M1F SS20M1F 22-20 .34-.50 Gold Flash SP20M1G5 SS20M1G5 22-20 .34-.50 Gold 5" SP20M1G10 SS20M1G10 22-20 .34-.50 Gold 10" SP20M1G15 SS20M1G15 22-20 .34-.50 Gold 15" SP20M1G30 SS20M1G30 22-20 .34-.50 Gold 30" SP24M1F SS24M1F 22-20 .14-.25 Gold Flash SP24M1G5 SS24M1G5 26-24 .14-.25 Gold 5" SP24M1G10 SS24M1G10 26-24 .14-.25 Gold 10" SP24M1G15 SS24M1G15 26-24 .14-.25 Gold 15" SP24M1G30 SS24M1G30 26-24 .14-.25 Gold 30" Contact Extraction Tool, #16 (O 1.6) Contact (mm) QXRT16 Hand Tool, Stamped & Formed Contact, Size 16, 20-14AWG MFX-3954 Crimp Die for Stamped & Formed Contact MFX-3957 141 STEP 1 Choose Receptacle Style STEP 2 Choose Plug Style STEP 2 Choose Backshell Style Jam Nut Receptacle Kit Including Receptacle & Contacts RT071823PNH Backshell RT071823SNH SEE TABLE ON NEXT PAGE FOR PART DETAILS Plug RT0S18CGNS1 RT071823PNHEC RT061823PNH RT071823SNHEC RT0S18CGNS2 OR Square Flange Receptacles RT061823SNH RT0L18CGNS1 RT061823PNHEC RT001823PNH RT0L18CGNS2 RT061823SNHEC RT001823SNH OR RT001823PNHEC RT001823SNHEC 142 Square Flange Receptacle Kit Including Receptacle,Gasket & Contacts Plug Kit Including Connector, Backshell & Contacts CONTACTS SOLD SEPARATELY SEE PAGE 148 Jam Nut Receptacles 23 POSITIONS 13A / 300V Number of Contacts: 23 Salt Spray: 48h Contact Size: 16 Connector Solutions Shell Size: 18 Sealing: IP67 eco|mate(R) rm Standard Products * Suitable For Indoor and Outdoor Applications * EMI/RMI Shielding Capability with Appropriate Backshell * Operating Temperature: -40C to +105C * 500 Mating Cycles * Contacts and Cord Grips Ordered Separately * UL ECBT2 Certified* An upgraded silicone seal is available for all connector parts. Please add "03" to the end of the part number when ordering. Operating Temperature: -40C to +125C. Not available in kits. Insert Arrangement Pin (Male) Faceview Connector Part Numbers Part Number Male Female RT071823PNH RT071823SNH RT071823PNHEC Figure Drawings Connector Type Male Female Jam Nut Receptacle 1,5 2,5 RT071823SNHEC Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal** 3,5 4,5 RT071823PNHK RT071823SNHK Jam Nut Receptacle Kit 1,5 2,5 RT061823PNH RT061823SNH Plug 6 7 RT061823PNHEC RT061823SNHEC Plug with O-ring Seal and End Cap with Individual Rear Wire Seal** 8 9 RT061823PNHK RT061823SNHK Plug Kit 1,5 2,5 RT001823PNH RT001823SNH Square Flange Receptacle 10,14 11,14 RT001823PNHEC RT001823SNHEC Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal** 12,14 13,14 RT001823PNHK RT001823SNHK Square Flange Receptacle Kit 10,14 11,14 Contacts supplied separately see page 148 **See page 145 for the real seal wire range Backshells Part Number Backshell Type Cable Range (mm) Figure Drawings Shielding RT0S18CGNS1 Short Cord Grip (straight) 9.0-14.5 15 RT0S18CGNS2 Short Cord Grip (straight) 13.5-17 15 RT0L18CGNS1 Long Cord Grip (straight) 9.0-14.5 16 RT0L18CGNS2 Long Cord Grip (straight) 13.5-17 16 *Connector parts with part numbers ending in EC (with an end cap) were not available for submittal at the time of UL certification. 143 Shell Size: 18 Sealing: IP67 Number of Contacts: 23 Salt Spray: 48h Contact Size: 16 Dimensions Jam Nut Receptacle Jam Nut Receptacle Male Figure 1 Jam Nut Receptacle RT071823PNH Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 3 RT071823PNHEC Jam Nut Receptacle Panel Cutout Figure 5 144 Female Figure 2 RT071823SNH Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 4 RT071823SNHEC 23 POSITIONS 13A / 300V Number of Contacts: 23 Salt Spray: 48h Contact Size: 16 Connector Solutions Shell Size: 18 Sealing: IP67 Dimensions Plug Plug Male Figure 6 Plug RT061823PNH Female Plug with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 8 RT061823PNHEC Figure 7 RT061823SNH Plug with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 9 RT061823SNHEC Individual Sealing Wire Range Contact Size Insulation Overall Diameter (min-max) Wire Range 16 O2.0mm - O3.2mm 14 - 24 AWG 145 Shell Size: 18 Sealing: IP67 Number of Contacts: 23 Salt Spray: 48h Contact Size: 16 Dimensions Square Flange Receptacle Square Flange Receptacle Male Figure 10 Square Flange Receptacle RT001823PNH Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 12 RT001823PNHEC Square Flange Receptacle Panel Cutout Figure 14 146 Female Figure 11 RT001823SNH Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 13 RT001823SNHEC 23 POSITIONS 13A / 300V Number of Contacts: 23 Salt Spray: 48h Contact Size: 16 Connector Solutions Shell Size: 18 Sealing: IP67 Dimensions Backshell Short Cord Grip (straight) Figure 15 Long Cord Grip (straight) Figure 16 Accessories Locking Clip with Lanyard Plug Dustcap with Chain Plug Dustcap without Chain Receptacle Dustcap with Chain 108039118 RT618DCG RT618DC RT018DCG Receptacle Dustcap with Nylon Cord, Made of Rubber Receptacle Dustcap without Chain Receptacle Dustcap without Nylon Cord, Rubber Material Sealing Plug RT018RL RT018DC RB00011918 CA401659 NEW! See Page 16 Square Flange Receptacle Gaskets, Thickness 0.8mm (0.2) RTFD18B 147 Shell Size: 18 Sealing: IP67 Number of Contacts: 23 Salt Spray: 48h Contact Size: 16 Contacts Machined Contacts Tools Crimp Contacts, Machined Part Number 148 AWG Wire Range Plating Male Female MP14M23F MS14M23F 14 2.0-2.5 Gold Flash MP14M23FG5 MS14M23G5 14 2.0-2.5 Gold 5" MP14M23FG10 MS14M23G10 14 2.0-2.5 Gold 10" MP14M23FG15 MS14M23G15 14 2.0-2.5 Gold 15" MP14M23G30 MS14M23G30 14 2.0-2.5 Gold 30" MP16M23F MS16M23F 18-16 .75-1.5 Gold Flash MP16M23G5 MS16M23G5 18-16 .75-1.5 Gold 5" MP16M23G10 MS16M23G10 18-16 .75-1.5 Gold 10" MP16M23G15 MS16M23G15 18-16 .75-1.5 Gold 15" MP16M23G30 MS16M23G30 18-16 .75-1.5 Gold 30" MP20M23F MS20M23F 22-20 .34-.50 Gold Flash MP20M23G5 MS20M23G5 22-20 .34-.50 Gold 5" MP20M23G10 MS20M23G10 22-20 .34-.50 Gold 10" MP20M23G15 MS20M23G15 22-20 .34-.50 Gold 15" MP20M23G30 MS20M23G30 22-20 .34-.50 Gold 30" MP24M23F MS24M23F 26-24 .14-.25 Gold Flash MP24M23G5 MS24M23G5 26-24 .14-.25 Gold 5" MP24M23G10 MS24M23G10 26-24 .14-.25 Gold 10" MP24M23G15 MS24M23G15 26-24 .14-.25 Gold 15" MP24M23G30 MS24M23G30 26-24 .14-.25 Gold 30" Contact Extraction Tool, #16 (O 1.6) Contact (mm) QXRT16 Hand Crimp Tool for Machined Contacts MFX-3959 Pneumatic Crimp Tool for Machined Contacts MFX-3960 23 POSITIONS 13A / 300V Number of Contacts: 23 Salt Spray: 48h Contact Size: 16 Connector Solutions Shell Size: 18 Sealing: IP67 Contacts (con't) Stamped & Formed Contacts Tools Crimp Contacts, Stamped & Formed Part Number AWG Wire Range Plating Male Female SP14M1F SS14M1F 14 2.0-2.5 Gold Flash SP14M1G5 SS14M1G5 14 2.0-2.5 Gold 5" SP14M1G10 SS14M1G10 14 2.0-2.5 Gold 10" SP14M1G15 SS14M1G15 14 2.0-2.5 Gold 15" SP14M1G30 SS14M1G30 14 2.0-2.5 Gold 30" SP16M1F SS16M1F 18-16 .75-1.5 Gold Flash SP16M1G5 SS16M1G5 18-16 .75-1.5 Gold 5" SP16M1G10 SS16M1G10 18-16 .75-1.5 Gold 10" SP16M1G15 SS16M1G15 18-16 .75-1.5 Gold 15" SP16M1G30 SS16M1G30 18-16 .75-1.5 Gold 30" SP20M1F SS20M1F 22-20 .34-.50 Gold Flash SP20M1G5 SS20M1G5 22-20 .34-.50 Gold 5" SP20M1G10 SS20M1G10 22-20 .34-.50 Gold 10" SP20M1G15 SS20M1G15 22-20 .34-.50 Gold 15" SP20M1G30 SS20M1G30 22-20 .34-.50 Gold 30" SP24M1F SS24M1F 22-20 .14-.25 Gold Flash SP24M1G5 SS24M1G5 26-24 .14-.25 Gold 5" SP24M1G10 SS24M1G10 26-24 .14-.25 Gold 10" SP24M1G15 SS24M1G15 26-24 .14-.25 Gold 15" SP24M1G30 SS24M1G30 26-24 .14-.25 Gold 30" Contact Extraction Tool, #16 (O 1.6) Contact (mm) QXRT16 Hand Tool, Stamped & Formed Contact, Size 16, 20-14AWG MFX-3954 Crimp Die for Stamped & Formed Contact MFX-3957 149 STEP 1 Choose Receptacle Style STEP 2 Choose Plug Style STEP 2 Choose Backshell Style Jam Nut Receptacles RT0W71626PNH RT0S16CGNS1 RT0W71626SNH SEE TABLE ON NEXT PAGE FOR PART DETAILS Plug RT0S16CGNS2 RT0W71626PNHEC RT0W61626PNH RT0L16CGNS1 RT0W71626SNHEC OR Square Flange Receptacles RT0W61626SNH RT0W61626PNHEC RT0L16CGNS2 RT0B16CGNS1 RT0W01626PNH RT0W61626SNHEC RT0B16CGNS2 RT0W01626SNH OR RT0W01626PNHEC RT0W01626SNHEC 150 Square Flange Receptacle Kit Including Receptacle,Gasket & Contacts Plug Kit Including Connector, Backshell & Contacts CONTACTS SOLD SEPARATELY SEE PAGE 156 Backshell Jam Nut Receptacle Kit Including Receptacle & Contacts 26 POSITIONS 5A, 7.5A / 150V Number of Contacts: 26 Salt Spray: 48h Contact Size: 20 Connector Solutions Shell Size: 16 Sealing: IP67 eco|mate(R) rm Standard Products * Suitable For Indoor and Outdoor Applications * EMI/RMI Shielding Capability with Appropriate Backshell * Operating Temperature: -40C to +105C * 500 Mating Cycles * Contacts and Cord Grips Ordered Separately * UL ECBT2 Certified* An upgraded silicone seal is available for all connector parts. Please add "03" to the end of the part number when ordering. Operating Temperature: -40C to +125C. Not available in kits. Insert Arrangement Pin (Male) Faceview Connector Part Numbers Part Number Male Female RT0W71626PNH RT0W71626SNH RT0W71626PNHEC Figure Drawings Connector Type Male Female Jam Nut Receptacle 1,5 2,5 RT0W71626SNHEC Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal** 3,5 4,5 RT0W71626PNHK RT0W71626SNHK Jam Nut Receptacle Kit 1,5 2,5 RT0W61626PNH RT0W61626SNH Plug 6 7 RT0W61626PNHEC RT0W61626SNHEC Plug with O-ring Seal and End Cap with Individual Rear Wire Seal** 8 9 RT0W61626PNHK RT0W61626SNHK Plug Kit 6 7 RT0W01626PNH RT0W01626SNH Square Flange Receptacle 10,14 11,14 RT0W01626PNHEC RT0W01626SNHEC Square Flange Receptacle with Unshielded Backshell and End Cap with Individual Rear Wire Seal** 12,14 13,14 RT0W01626PNHK RT0W01626SNHK Square Flange Receptacle Kit 10,14 11,14 Backshells Contacts supplied separately see page 156 **See page 153 for the real seal wire range Part Number Backshell Type Cable Range (mm) Figure Drawings Shielding RT0S16CGNS1 Short Cord Grip (straight) 9.0-14.5 15 RT0S16CGNS2 Short Cord Grip (straight) 13.5-17 15 RT0L16CGNS1 Long Cord Grip (straight) 9.0-14.5 16 RT0L16CGNS2 Long Cord Grip (straight) 13.5-17 16 RT0B16CGNS1 Cord Grip (90) 9.5-14.5 17 RT0B16CGNS2 Cord Grip (90) 13.5-17.0 17 *Connector parts with part numbers ending in EC (with an end cap) were not available for submittal at the time of UL certification. 151 Shell Size: 16 Sealing: IP67 Number of Contacts: 26 Salt Spray: 48h Contact Size: 20 Dimensions Jam Nut Receptacle Jam Nut Receptacle Male Figure 1 Jam Nut Receptacle RT0W71626PNH Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 3 RT0W71626PNHEC Jam Nut Receptacle Panel Cutout Figure 5 152 Female Figure 2 RT0W71626SNH Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 4 RT0W71626SNHEC 26 POSITIONS 5A, 7.5A / 150V Number of Contacts: 26 Salt Spray: 48h Contact Size: 20 Connector Solutions Shell Size: 16 Sealing: IP67 Dimensions Plug Plug Male Figure 6 Plug RT0W61626PNH Female Plug with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 8 RT0W61626PNHEC Figure 7 RT0W61626SNH Plug with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 9 RT0W61626SNHEC Individual Sealing Wire Range Contact Size Insulation Overall Diameter (min-max) Wire Range 20 O1.6mm - O2.6mm 20 - 30 AWG 153 Shell Size: 16 Sealing: IP67 Number of Contacts: 26 Salt Spray: 48h Contact Size: 20 Dimensions Square Flange Receptacle Square Flange Receptacle Male Figure 10 RT0W01626PNH Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 12 RT0W01626PNHEC Square Flange Receptacle Panel Cutout Figure 14 154 Square Flange Receptacle Female Figure 11 RT0W01626SNH Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 13 RT0W01626SNHEC 26 POSITIONS 5A, 7.5A / 150V Number of Contacts: 26 Salt Spray: 48h Contact Size: 20 Connector Solutions Shell Size: 16 Sealing: IP67 Dimensions Backshell Short Cord Grip (straight) Figure 15 Long Cord Grip (straight) Figure 17 Cord Grip (90) Figure 19 Accessories Locking Clip with Lanyard Plug Dustcap with Chain Plug Dustcap without Chain Receptacle Dustcap with Chain 108039116 RT616DCG RT616DC RT016DCG Receptacle Dustcap with Nylon Cord, Made of Rubber Receptacle Dustcap without Chain Receptacle Dustcap without Nylon Cord, Rubber Material Sealing Plug RT016RL RT016DC RB00011916 CA402059 NEW! See Page 16 Square Flange Receptacle Gaskets, Thickness 0.8mm (0.2) RTFD16B 155 Shell Size: 16 Sealing: IP67 Number of Contacts: 26 Salt Spray: 48h Contact Size: 20 Contacts Machined Contacts Crimp Contacts, Machined (7.5A Max) Part Number 156 AWG Wire Range Plating Male Female MP20W23F MS20W23F 22-20 .34-.50 Gold Flash MP20W23G5 MS20W23G5 22-20 .34-.50 Gold 5" MP20W23G10 MS20W23G10 22-20 .34-.50 Gold 10" MP20W23G15 MS20W23G15 22-20 .34-.50 Gold 15" MP20W23G30 MS20W23G30 22-20 .34-.50 Gold 30" MP24W23F MS24W23F 26-24 .13-.25 Gold Flash MP24W23G5 MS24W23G5 26-24 .13-.25 Gold 5" MP24W23G10 MS24W23G10 26-24 .13-.25 Gold 10" MP24W23G15 MS24W23G15 26-24 .13-.25 Gold 15" MP24W23G30 MS24W23G30 26-24 .13-.25 Gold 30" MP28W23F MS28W23F 30-28 .05-.08 Gold Flash MP28W23G5 MS28W23G5 30-28 .05-.08 Gold 5" MP28W23G10 MS28W23G10 30-28 .05-.08 Gold 10" MP28W23G15 MS28W23G15 30-28 .05-.08 Gold 15" MP28W23G30 MS28W23G30 30-28 .05-.08 Gold 30" Tools Contact Extraction Tool, #20 (O 1.0) Contact (mm) QXRT20 Hand Crimp Tool for Machined Contacts MFX-3959 Pneumatic Crimp Tool for Machined Contact MFX-3960 26 POSITIONS 5A, 7.5A / 150V Number of Contacts: 26 Salt Spray: 48h Contact Size: 20 Connector Solutions Shell Size: 16 Sealing: IP67 Contacts (con't) Stamped & Formed Contacts Crimp Contacts, Stamped & Formed (5A Max) Part Number AWG Wire Range Plating Male Female SP20W1F SS20W1F 22-20 .34-.50 Gold Flash SP20W1G5 SS20W1G5 22-20 .34-.50 Gold 5" SP20W1G10 SS20W1G10 22-20 .34-.50 Gold 10" SP20W1G15 SS20W1G15 22-20 .34-.50 Gold 15" SP20W1G30 SS20W1G30 22-20 .34-.50 Gold 30" SP24W1F SS24W1F 26-24 .14-.25 Gold Flash SP24W1G5 SS24W1G5 26-24 .14-.25 Gold 5" SP24W1G10 SS24W1G10 26-24 .14-.25 Gold 10" SP24W1G15 SS24W1G15 26-24 .14-.25 Gold 15" SP24W1G30 SS24W1G30 26-24 .14-.25 Gold 30" SP28W1F SS28W1F 30-28 .05-.08 Gold Flash SP28W1G5 SS28W1G5 30-28 .05-.08 Gold 5" SP28W1G10 SS28W1G10 30-28 .05-.08 Gold 10" SP28W1G15 SS28W1G15 30-28 .05-.08 Gold 15" SP28W1G30 SS28W1G30 30-28 .05-.08 Gold 30" Tools Contact Extraction Tool, #20 (O 1.0) Contact (mm) QXRT20 Hand Tool, Stamped & Formed Contact, Size 20, 20-28AWG MFX-3958 Crimp Die for Stamped & Formed Contact MFX-3957 157 STEP 1 Choose Receptacle Style STEP 2 Choose Plug Style STEP 2 Choose Backshell Style Jam Nut Receptacle Kit Including Receptacle & Contacts RT072028PNH RT072028SNH SEE TABLE ON NEXT PAGE FOR PART DETAILS Plug Backshell RT072028PNHEC RT062028PNH RT072028SNHEC RT0L20CPGS5 OR Square Flange Receptacles RT062028SNH RT062028PNHEC RT0L20CPGS6 RT002028PNH RT062028SNHEC RT002028SNH OR RT002028PNHEC RT002028SNHEC 158 Square Flange Receptacle Kit Including Receptacle,Gasket & Contacts Plug Kit Including Connector, Backshell & Contacts CONTACTS SOLD SEPARATELY SEE PAGE 164 Jam Nut Receptacles 28 POSITIONS 13A / 300V Number of Contacts: 28 Salt Spray: 48h Contact Size: 16 Connector Solutions Shell Size: 20 Sealing: IP67 eco|mate(R) rm Standard Products * Suitable For Indoor and Outdoor Applications * EMI/RMI Shielding Capability with Appropriate Backshell * Operating Temperature: -40C to +105C * 500 Mating Cycles * Contacts and Cord Grips Ordered Separately * UL ECBT2 Certified* An upgraded silicone seal is available for all connector parts. Please add "03" to the end of the part number when ordering. Operating Temperature: -40C to +125C. Not available in kits. Insert Arrangement Pin (Male) Faceview Connector Part Numbers Part Number Male Female RT072028PNH RT072028SNH RT072028PNHEC Figure Drawings Connector Type Male Female Jam Nut Receptacle 1,5 2,5 RT072028SNHEC Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal** 3,5 4,5 RT072028PNHK RT072028SNHK Jam Nut Receptacle Kit 1,5 2,5 RT062028PNH RT062028SNH Plug 6 7 RT062028PNHEC RT062028SNHEC Plug with O-ring Seal and End Cap with Individual Rear Wire Seal** 8 9 RT062028PNHK RT062028SNHK Plug Kit 6 7 RT002028PNH RT002028SNH Square Flange Receptacle 10,14 11,14 RT002028PNHEC RT002028SNHEC Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal** 12,14 13,14 RT002028PNHK RT002028SNHK Square Flange Receptacle Kit 10,14 11,14 Contacts supplied separately see page 164 **See page 153 for the real seal wire range Backshells Part Number Backshell Type Cable Range (mm) Figure Drawings Shielding RT0L20CPGS5 Long Cord Grip (straight) 12.5-13.3 15 RT0L20CPGS6 Long Cord Grip (straight) 15.5-19.5 15 *Connector parts with part numbers ending in EC (with an end cap) were not available for submittal at the time of UL certification. 159 Shell Size: 20 Sealing: IP67 Number of Contacts: 28 Salt Spray: 48h Contact Size: 16 Dimensions Jam Nut Receptacle Jam Nut Receptacle Male Figure 1 Jam Nut Receptacle RT072028PNH Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 3 RT072028PNHEC Jam Nut Receptacle Panel Cutout Figure 5 160 Female Figure 2 RT072028SNH Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 4 RT072028SNHEC 28 POSITIONS 13A / 300V Number of Contacts: 28 Salt Spray: 48h Contact Size: 16 Connector Solutions Shell Size: 20 Sealing: IP67 Dimensions Plug Plug Male Figure 6 Plug RT062028PNH Female Plug with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 8 RT062028PNHEC Figure 7 RT062028SNH Plug with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 9 RT062028SNHEC Individual Sealing Wire Range Contact Size Insulation Overall Diameter (min-max) Wire Range 16 O2.0mm - O3.2mm 14 - 24 AWG 161 Shell Size: 20 Sealing: IP67 Number of Contacts: 28 Salt Spray: 48h Contact Size: 16 Dimensions Square Flange Receptacle Square Flange Receptacle Male Figure 10 Square Flange Receptacle RT002028PNH Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 12 RT002028PNHEC Square Flange Receptacle Panel Cutout Figure 14 162 Female Figure 11 RT002028SNH Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 13 RT002028SNHEC 28 POSITIONS 13A / 300V Number of Contacts: 28 Salt Spray: 48h Contact Size: 16 Connector Solutions Shell Size: 20 Sealing: IP67 Dimensions Backshell Long Cord Grip (straight) Figure 15 Accessories Locking Clip with Lanyard Plug Dustcap with Chain Plug Dustcap without Chain Receptacle Dustcap with Chain 108039120 RT620DCG RT620DC RT020DCG Receptacle Dustcap with Nylon Cord Receptacle Dustcap without Chain Receptacle Dustcap without Nylon Cord, Rubber Material Sealing Plug RT020RL RT020DC RB00011920 CA401659 NEW! See Page 16 Square Flange Receptacle Gaskets, Thickness 0.8mm (0.2) RTFD20B 163 Shell Size: 20 Sealing: IP67 Number of Contacts: 28 Salt Spray: 48h Contact Size: 16 Contacts Machined Contacts Tools Crimp Contacts, Machined Part Number 164 AWG Wire Range Plating MS14M23F 14 2.0-2.5 Gold Flash MP14M23G5 MS14M23G5 14 2.0-2.5 Gold 5" MP14M23G10 MS14M23G10 14 2.0-2.5 Gold 10" MP14M23G15 MS14M23G15 14 2.0-2.5 Gold 15" MP14M23G30 MS14M23G30 14 2.0-2.5 Gold 30" MP16M23F MS16M23F 18-16 .75-1.5 Gold Flash MP16M23G5 MS16M23G5 18-16 .75-1.5 Gold 5" MP16M23G10 MS16M23G10 18-16 .75-1.5 Gold 10" MP16M23G15 MS16M23G15 18-16 .75-1.5 Gold 15" MP16M23G30 MS16M23G30 18-16 .75-1.5 Gold 30" MP20M23F MS20M23F 22-20 .34-.50 Gold Flash MP20M23G5 MS20M23G5 22-20 .34-.50 Gold 5" MP20M23G10 MS20M23G10 22-20 .34-.50 Gold 10" MP20M23G15 MS20M23G15 22-20 .34-.50 Gold 15" MP20M23G30 MS20M23G30 22-20 .34-.50 Gold 30" MP24M23F MS24M23F 26-24 .14-.25 Gold Flash MP24M23G5 MS24M23G5 26-24 .14-.25 Gold 5" MP24M23G10 MS24M23G10 26-24 .14-.25 Gold 10" MP24M23G15 MS24M23G15 26-24 .14-.25 Gold 15" MP24M23G30 MS24M23G30 26-24 .14-.25 Gold 30" Male Female MP14M23F Contact Extraction Tool, #16 (O 1.6) Contact QXRT16 Hand Crimp Tool for Machined Contacts MFX-3959 Pneumatic Crimp Tool for Machined Contacts MFX-3960 28 POSITIONS 13A / 300V Number of Contacts: 28 Salt Spray: 48h Contact Size: 16 Connector Solutions Shell Size: 20 Sealing: IP67 Contacts (con't) Stamped & Formed Contacts Tools Crimp Contacts, Stamped & Formed Part Number AWG Wire Range Plating Male Female SP14M1F SS14M1F 14 2.0-2.5 Gold Flash SP14M1G5 SS14M1G5 14 2.0-2.5 Gold 5" SP14M1G10 SS14M1G10 14 2.0-2.5 Gold 10" SP14M1G15 SS14M1G15 14 2.0-2.5 Gold 15" SP14M1G30 SS14M1G30 14 2.0-2.5 Gold 30" SP16M1F SS16M1F 18-16 .75-1.5 Gold Flash SP16M1G5 SS16M1G5 18-16 .75-1.5 Gold 5" SP16M1G10 SS16M1G10 18-16 .75-1.5 Gold 10" SP16M1G15 SS16M1G15 18-16 .75-1.5 Gold 15" SP16M1G30 SS16M1G30 18-16 .75-1.5 Gold 30" SP20M1F SS20M1F 22-20 .34-.50 Gold Flash SP20M1G5 SS20M1G5 22-20 .34-.50 Gold 5" SP20M1G10 SS20M1G10 22-20 .34-.50 Gold 10" SP20M1G15 SS20M1G15 22-20 .34-.50 Gold 15" SP20M1G30 SS20M1G30 22-20 .34-.50 Gold 30" SP24M1F SS24M1F 22-20 .14-.25 Gold Flash SP24M1G5 SS24M1G5 26-24 .14-.25 Gold 5" SP24M1G10 SS24M1G10 26-24 .14-.25 Gold 10" SP24M1G15 SS24M1G15 26-24 .14-.25 Gold 15" SP24M1G30 SS24M1G30 26-24 .14-.25 Gold 30" Contact Extraction Tool, #16 (O 1.6) Contact (mm) QXRT16 Hand Tool, Stamped & Formed Contact, Size 16, 20-14AWG MFX-3954 Crimp Die for Stamped & Formed Contact MFX-3957 165 STEP 1 Choose Receptacle Style STEP 2 Choose Plug Style STEP 2 Choose Backshell Style Jam Nut Receptacle Kit Including Receptacle & Contacts RT0W71832PNH Backshell RT0W71832SNH SEE TABLE ON NEXT PAGE FOR PART DETAILS Plug RT0S18CGNS1 RT0W71832PNHEC RT0W61832PNH RT0W71832SNHEC RT0S18CGNS2 OR Square Flange Receptacles RT0W61832SNH RT0L18CGNS1 RT0W61832PNHEC RT0W01832PNH RT0W61832SNHEC RT0L18CGNS2 RT0W01832SNH OR RT0W01832PNHEC RT0W01832SNHEC 166 Square Flange Receptacle Kit Including Receptacle,Gasket & Contacts Plug Kit Including Connector, Backshell & Contacts CONTACTS SOLD SEPARATELY SEE PAGE 172 Jam Nut Receptacles 32 POSITIONS 5A, 7.5A / 150V Number of Contacts: 32 Salt Spray: 48h Contact Size: 20 Connector Solutions Shell Size: 18 Sealing: IP67 eco|mate(R) rm Standard Products * Suitable For Indoor and Outdoor Applications * EMI/RMI Shielding Capability with Appropriate Backshell * Operating Temperature: -40C to +105C * 500 Mating Cycles * Contacts and Cord Grips Ordered Separately * UL ECBT2 Certified* An upgraded silicone seal is available for all connector parts. Please add "03" to the end of the part number when ordering. Operating Temperature: -40C to +125C. Not available in kits. Insert Arrangement Pin (Male) Faceview Connector Part Numbers Part Number Male Female RT0W71832PNH RT0W71832SNH RT0W71832PNHEC Figure Drawings Connector Type Male Female Jam Nut Receptacle 1,5 2,5 RT0W71832SNHEC Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal** 3,5 4,5 RT0W71832PNHK RT0W71832SNHK Jam Nut Receptacle Kit 1,5 2,5 RT0W61832PNH RT0W61832SNH Plug 6 7 RT0W61832PNHEC RT0W61832SNHEC Plug with O-ring Seal and End Cap with Individual Rear Wire Seal** 8 9 RT0W61832PNHK RT0W61832SNHK Plug Kit 6 7 RT0W01832PNH RT0W01832SNH Square Flange Receptacle 10,14 11,14 RT0W01832PNHEC RT0W01832SNHEC Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal** 12,14 13,14 RT0W01832PNHK RT0W01832SNHK Square Flange Receptacle Kit 10,14 11,14 Contacts supplied separately see page 172 **See page 169 for the real seal wire range Backshells Part Number Backshell Type Cable Range (mm) Figure Drawings Shielding RT0S18CGNS1 Short Cord Grip (straight) 9.0-14.5 15 RT0S18CGNS2 Short Cord Grip (straight) 13.5-17 15 RT0L18CGNS1 Long Cord Grip (straight) 9.0-14.5 16 RT0L18CGNS2 Long Cord Grip (straight) 13.5-17 16 *Connector parts with part numbers ending in EC (with an end cap) were not available for submittal at the time of UL certification. 167 Shell Size: 18 Sealing: IP67 Number of Contacts: 32 Salt Spray: 48h Contact Size: 20 Dimensions Jam Nut Receptacle Jam Nut Receptacle Male Figure 1 Jam Nut Receptacle RT0W71832PNH Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 3 RT0W71832PNHEC Jam Nut Receptacle Panel Cutout Figure 5 168 Female Figure 2 RT0W71832SNH Jam Nut Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 4 RT0W71832SNHEC 32 POSITIONS 5A, 7.5A / 150V Number of Contacts: 32 Salt Spray: 48h Contact Size: 20 Connector Solutions Shell Size: 18 Sealing: IP67 Dimensions Plug Plug Male Figure 6 Plug RT0W61832PNH Female Plug with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 8 RT0W61832PNHEC Figure 7 RT0W61832SNH Plug with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 9 RT0W61832SNHEC Individual Sealing Wire Range Contact Size Insulation Overall Diameter (min-max) Wire Range 20 O1.6mm - O2.6mm 20 - 30 AWG 169 Shell Size: 18 Sealing: IP67 Number of Contacts: 32 Salt Spray: 48h Contact Size: 20 Dimensions Square Flange Receptacle Square Flange Receptacle Male Figure 10 RT0W01832PNH Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Male Figure 12 RT0W01832PNHEC Square Flange Receptacle Panel Cutout Figure 14 170 Square Flange Receptacle Female Figure 11 RT0W01832SNH Square Flange Receptacle with O-ring Seal and End Cap with Individual Rear Wire Seal Female Figure 13 RT0W01832SNHEC 32 POSITIONS 5A, 7.5A / 150V Number of Contacts: 32 Salt Spray: 48h Contact Size: 20 Connector Solutions Shell Size: 18 Sealing: IP67 Dimensions Backshell Short Cord Grip (straight) Figure 15 Long Cord Grip (straight) Figure 16 Accessories Plug Dustcap with Chain Plug Dustcap without Chain Receptacle Dustcap with Chain Receptacle Dustcap with Nylon Cord, Made of Rubber RT618DCG RT618DC RT018DCG RT018RL Receptacle Dustcap without Chain Receptacle Dustcap without Nylon Cord, Rubber Material Sealing Plug Sealing Plug RT018DC RB00011918 CA401659 CA401259 Square Flange Receptacle Gaskets, Thickness 0.8mm (0.2) Locking Clip with Lanyard NEW! See Page 16 RTFD18B 108039118 171 Shell Size: 18 Sealing: IP67 Number of Contacts: 32 Salt Spray: 48h Contact Size: 20 Contacts Machined Contacts Tools Crimp Contacts, Machined (7.5A Max) PART NUMBER 172 AWG Wire Range Plating Contact Extraction Tool, #20 (O 1.0) Contact MALE FEMALE MP20W23F MS20W23F 22-20 .34-.50 Gold Flash MP20W23G5 MS20W23G5 22-20 .34-.50 Gold 5" MP20W23G10 MS20W23G10 22-20 .34-.50 Gold 10" MP20W23G15 MS20W23G15 22-20 .34-.50 Gold 15" MP20W23G30 MS20W23G30 22-20 .34-.50 Gold 30" MP24W23F MS24W23F 26-24 .13-.25 Gold Flash MP24W23G5 MS24W23G5 26-24 .13-.25 Gold 5" MP24W23G10 MS24W23G10 26-24 .13-.25 Gold 10" MP24W23G15 MS24W23G15 26-24 .13-.25 Gold 15" MFX-3959 MP24W23G30 MS24W23G30 26-24 .13-.25 Gold 30" Pneumatic Crimp Tool for Machined Contact MP28W23F MS28W23F 30-28 .05-.08 Gold Flash MP28W23G5 MS28W23G5 30-28 .05-.08 Gold 5" MP28W23G10 MS28W23G10 30-28 .05-.08 Gold 10" MP28W23G15 MS28W23G15 30-28 .05-.08 Gold 15" MP28W23G30 MS28W23G30 30-28 .05-.08 Gold 30" (mm) QXRT20 Hand Crimp Tool for Machined Contacts MFX-3960 32 POSITIONS 5A, 7.5A / 150V Number of Contacts: 32 Salt Spray: 48h Contact Size: 20 Connector Solutions Shell Size: 18 Sealing: IP67 Contacts (con't) Stamped & Formed Contacts Crimp Contacts, Stamped & Formed (5A Max) PART NUMBER AWG Wire Range Plating Tools Contact Extraction Tool, #20 (O 1.0) Contact MALE FEMALE SP20W1F SS20W1F 22-20 .34-.50 Gold Flash SP20W1G5 SS20W1G5 22-20 .34-.50 Gold 5" SP20W1G10 SS20W1G10 22-20 .34-.50 Gold 10" SP20W1G15 SS20W1G15 22-20 .34-.50 Gold 15" SP20W1G30 SS20W1G30 22-20 .34-.50 Gold 30" SP24W1F SS24W1F 26-24 .14-.25 Gold Flash SP24W1G5 SS24W1G5 26-24 .14-.25 Gold 5" SP24W1G10 SS24W1G10 26-24 .14-.25 Gold 10" SP24W1G15 SS24W1G15 26-24 .14-.25 Gold 15" MFX-3958 SP24W1G30 SS24W1G30 26-24 .14-.25 Gold 30" Crimp Die for Stamped & Formed Contact SP28W1F SS28W1F 30-28 .05-.08 Gold Flash SP28W1G5 SS28W1G5 30-28 .05-.08 Gold 5" SP28W1G10 SS28W1G10 30-28 .05-.08 Gold 10" SP28W1G15 SS28W1G15 30-28 .05-.08 Gold 15" SP28W1G30 SS28W1G30 30-28 .05-.08 Gold 30" (mm) QXRT20 Hand Tool, Stamped & Formed Contact, Size 20, 20-28AWG MFX-3957 173 Shell Size: 24 Sealing: IP67 Number of Contacts: 48 Salt Spray: 48h Contact Size: 16 eco|mate(R) rm Standard Products * Suitable For Indoor and Outdoor Applications * EMI/RMI Shielding Capability with Appropriate Backshell * Operating Temperature: -40C to +105C * 500 Mating Cycles * Contacts and Cord Grips Ordered Separately * UL ECBT2 Certified* Insert Arrangement Pin (Male) Faceview An upgraded silicone seal is available for all connector parts. Please add "03" to the end of the part number when ordering. Operating Temperature: -40C to +125C. Not available in kits. STEP 2 Choose Plug Style STEP 1 Choose Receptacle Style Accessories Square Flange Receptacles Plug RT002448PNH RT062448PNH CA401659 Square Flange Receptacle Gaskets, Thickness 1.0mm (0.2) RT062448SNH RT002448SNH RTFD24B Connector Part Numbers Part Number Male Female Connector Type Figure Drawings Male Female RT062448PNH RT062448SNH Plug 1 2 RT002448PNH RT002448SNH Square Flange Receptacle 3,5 4,5 Contacts supplied separately see page 176 174 Locking Clip with Lanyard NEW! See Page 16 108039122 CONTACTS SOLD SEPARATELY SEE PAGE 176 Sealing Plug 48 POSITIONS 13A / 300V Number of Contacts: 48 Salt Spray: 48h Contact Size: 16 Connector Solutions Shell Size: 24 Sealing: IP67 Dimensions Plug Plug Male Figure 1 Plug RT062448PNH Female Figure 2 RT062448SNH Dimensions Square Flange Receptacle Square Flange Receptacle Male Figure 3 Square Flange Receptacle RT002448PNH Female Figure 4 RT002448SNH Square Flange Receptacle Panel Cutout Figure 5 Figure 5 175 Shell Size: 24 Sealing: IP67 Number of Contacts: 48 Salt Spray: 48h Contact Size: 16 Contacts Machined Contacts Tools Crimp Contacts, Machined Part Number 176 AWG Wire Range Plating Male Female MP14M23F MS14M23F 14 2.0-2.5 Gold Flash MP14M23G5 MS14M23G5 14 2.0-2.5 Gold 5" MP14M23G10 MS14M23G10 14 2.0-2.5 Gold 10" MP14M23G15 MS14M23G15 14 2.0-2.5 Gold 15" MP14M23G30 MS14M23G30 14 2.0-2.5 Gold 30" MP16M23F MS16M23F 18-16 .75-1.5 Gold Flash MP16M23G5 MS16M23G5 18-16 .75-1.5 Gold 5" MP16M23G10 MS16M23G10 18-16 .75-1.5 Gold 10" MP16M23G15 MS16M23G15 18-16 .75-1.5 Gold 15" MP16M23G30 MS16M23G30 18-16 .75-1.5 Gold 30" MP20M23F MS20M23F 22-20 .34-.50 Gold Flash MP20M23G5 MS20M23G5 22-20 .34-.50 Gold 5" MP20M23G10 MS20M23G10 22-20 .34-.50 Gold 10" MP20M23G15 MS20M23G15 22-20 .34-.50 Gold 15" MP20M23G30 MS20M23G30 22-20 .34-.50 Gold 30" MP24M23F MS24M23F 26-24 .14-.25 Gold Flash MP24M23G5 MS24M23G5 26-24 .14-.25 Gold 5" MP24M23G10 MS24M23G10 26-24 .14-.25 Gold 10" MP24M23G15 MS24M23G15 26-24 .14-.25 Gold 15" MP24M23G30 MS24M23G30 26-24 .14-.25 Gold 30" Contact Extraction Tool, #16 (O 1.6) Contact (mm) QXRT16 Hand Crimp Tool for Machined Contacts MFX-3959 Pneumatic Crimp Tool for Machined Contacts MFX-3960 48 POSITIONS 13A / 300V Number of Contacts: 48 Salt Spray: 48h Contact Size: 16 Connector Solutions Shell Size: 24 Sealing: IP67 Contacts (con't) Stamped & Formed Contacts Tools Crimp Contacts, Stamped & Formed Part Number AWG Wire Range Plating Male Female SP14M1F SS14M1F 14 2.0-2.5 Gold Flash SP14M1G5 SS14M1G5 14 2.0-2.5 Gold 5" SP14M1G10 SS14M1G10 14 2.0-2.5 Gold 10" SP14M1G15 SS14M1G15 14 2.0-2.5 Gold 15" SP14M1G30 SS14M1G30 14 2.0-2.5 Gold 30" SP16M1F SS16M1F 18-16 .75-1.5 Gold Flash SP16M1G5 SS16M1G5 18-16 .75-1.5 Gold 5" SP16M1G10 SS16M1G10 18-16 .75-1.5 Gold 10" SP16M1G15 SS16M1G15 18-16 .75-1.5 Gold 15" SP16M1G30 SS16M1G30 18-16 .75-1.5 Gold 30" SP20M1F SS20M1F 22-20 .34-.50 Gold Flash SP20M1G5 SS20M1G5 22-20 .34-.50 Gold 5" SP20M1G10 SS20M1G10 22-20 .34-.50 Gold 10" SP20M1G15 SS20M1G15 22-20 .34-.50 Gold 15" SP20M1G30 SS20M1G30 22-20 .34-.50 Gold 30" SP24M1F SS24M1F 22-20 .14-.25 Gold Flash SP24M1G5 SS24M1G5 26-24 .14-.25 Gold 5" SP24M1G10 SS24M1G10 26-24 .14-.25 Gold 10" SP24M1G15 SS24M1G15 26-24 .14-.25 Gold 15" SP24M1G30 SS24M1G30 26-24 .14-.25 Gold 30" Contact Extraction Tool, #16 (O 1.6) Contact (mm) QXRT16 Hand Tool, Stamped & Formed Contact, Size 16, 20-14AWG MFX-3954 Crimp Die for Stamped & Formed Contact MFX-3957 177 STEP 2 Choose Plug Style SEE TABLE ON NEXT PAGE FOR PART DETAILS Square Flange Receptacles RTHP0121PN-16C RTHP6121SNH-16S2 RTHP0121PN-H1 RTHP6121SNH16-BS2 Crimp Barrel Contact 178 Plug Flat Hole Tail Contact (receptacle only) Screw Tail Contact (receptacle only) CONTACTS INCLUDED SEE PAGE 179 STEP 1 Choose Receptacle Style 1 POSITION 86A / 630V Number of Contacts: 1 Salt Spray: 48h Contact Size: 3.6mm Connector Solutions Shell Size: 12 Sealing: IP67 High Amperage eco|mate(R) rm with RADSOK(R) Technology * Single Pole High Power Arrangements * Current Rating at 25C: 86A * Flammability Rating: UL94-V0 * 3.6mm Contact Size * High Reliability * Operating Temperature: -40C to +125C * Low Contact Engagement / Separation Forces * RoHS Compliant * Operating Voltage: 630V * Low Contact Resistance * High Mating Cycle Durability Insert Arrangement Pin (Male) Faceview Connector Part Numbers Wire Range (mm) Connector Part Number Connector Type RTHP6121SNH-16S2 Female Plug Straight, Crimp, with Long Shielded Backshell 10-16 RTHP6121SNH16-BS2 Female Plug with 90 Shielded Backshell Contact Amps Figure Drawings Part Number Type AWG Plating 86 MS6ARS8S Crimp Barrel, Female 8 Silver 1 10-16 86 MS6ARS8S Crimp Barrel, Female 8 Silver 2 RTHP0121PN-16C Male Square Flange Receptacle Crimp 10-16 86 MP6ARS8S Crimp Barrel, Male 8 Silver 3,5 RTHP0121PN-H1 Male Square Flange Receptacle Flat Tail N/A 86 HPAHS Flathole Tail, Male 8 Silver 3,5 Contacts included. See chart for specific requirements 179 Shell Size: 12 Sealing: IP67 Number of Contacts: 1 Salt Spray: 48h Contact Size: 3.6mm Dimensions Plug Plug Straight, Crimp, Long Shielded Backshell Female 180 Figure 1 RTHP6121SNH-16S2 Plug with 90 Shielded Backshell Female Figure 2 RTHP6121SNH16-BS2 1 POSITION 86A / 630V Number of Contacts: 1 Salt Spray: 48h Contact Size: 3.6mm Dimensions Square Flange Receptacle Square Flange Receptacle Crimp Male Figure 3 RTHP0121PN1-6C Square Flange Receptacle Flat Tail Male Figure 4 Connector Solutions Shell Size: 12 Sealing: IP67 RTHP0121PN-H1 Square Flange Receptacle Panel Cutout Figure 5 181 STEP 2 Choose Plug Style Square Flange Receptacles Plug RTHP6141SNH25-EC SEE TABLE ON NEXT PAGE FOR PART DETAILS RTHP0141PN-25C RTHP6141SNH25-PS2 RTHP0141PN-H1 RTHP6141SNH-25S2 RTHP0141PN-M1 RTHP6141SNH25-BS2 Crimp Barrel Contact 182 Flat Hole Tail Contact (receptacle only) Screw Tail Contact (receptacle only) CONTACTS INCLUDED SEE PAGE 183 STEP 1 Choose Receptacle Style 1 POSITION 120A / 630V Number of Contacts: 1 Salt Spray: 48h Contact Size: 6mm Connector Solutions Shell Size: 14 Sealing: IP67 High Amperage eco|mate(R) rm with RADSOK(R) Technology * Single Pole High Power Arrangements * Current Rating at 25C: 120A * Flammability Rating: UL94-V0 * 6mm Contact Size * High Reliability * Operating Temperature: -40C to +125C * Low Contact Engagement / Separation Forces * RoHS Compliant * Operating Voltage: 630V * Low Contact Resistance * High Mating Cycle Durability Insert Arrangement Pin (Male) Faceview Connector Part Numbers Wire Range (mm) Connector Part Number Connector Type RTHP6141SNH25-EC Female Plug with Unshielded Short Backshell and End Cap with Individual Rear Wire Seal 20-25 RTHP6141SNH25-PS2 Female Plug with Short Shielded Backshell Contact Amps Figure AWG Plating Drawings Part Number Type 120 HS25BCS Crimp Barrel, Female 4 Silver 1 20-25 120 HS25BCS Crimp Barrel, Female 4 Silver 2 RTHP6141SNH-25S2 Female Plug Straight, Crimp, Long Shielded Backshell 20-25 120 HS25BCS Crimp Barrel, Female 4 Silver 3 RTHP6141SNH25-BS2 Female Plug with 90 Shielded Backshell 20-25 120 HS25BCS Crimp Barrel, Female 4 Silver 4 RTHP0141PN-25C Male Square Flange Receptacle Crimp 20-25 120 HP25BCS Crimp Barrel, Male 4 Silver 5,8 RTHP0141PN-H1 Male Square Flange Receptacle Flat Tail N/A 120 HPBHS Flathole Tail, Male 4 Silver 6,8 RTHP0141PN-M1 Male Square Flange Receptacle with Screw Tail N/A 120 HPBSS Screw Tail, Male 4 Silver 7,8 Contacts included. See chart for specific requirements 183 Shell Size: 14 Sealing: IP67 Number of Contacts: 1 Salt Spray: 48h Contact Size: 6mm Dimensions Plug Plug with Unshielded Backshell Female Figure 1 RTHP6141SNH25-EC Plug with Short Shielded Backshell Female Plug Straight, Crimp, Long Shielded Backshell Female 184 Figure 3 RTHP6141SNH-25S2 Figure 2 RTHP6141SNH25-PS2 Plug with 90 Shielded Backshell Female Figure 4 RTHP6141SNH25-BS2 1 POSITION 120A / 630V Number of Contacts: 1 Salt Spray: 48h Contact Size: 6mm Dimensions Square Flange Receptacle Square Flange Receptacle Crimp Male Figure 5 RTHP0141PN-25C Square Flange Receptacle with Screw Tail Square Flange Receptacle Flat Tail Male Figure 6 Connector Solutions Shell Size: 14 Sealing: IP67 RTHP0141PN-H1 Square Flange Receptacle Panel Cutout Figure 8 Male Figure 7 RTHP0141PN-M1 185 STEP 2 Choose Plug Style Square Flange Receptacles Plug RTHP0161PN-35C RTHP6161SNH25-PS3 RTHP0161PN-50C RTHP6161SNH35-PS2 RTHP0161PN-H1 RTHP6161SNH50-PS2 RTHP6161SNH-35S2 RTHP0161PN-M1 Crimp Barrel Contact 186 Flat Hole Tail Contact (receptacle only) Screw Tail Contact (receptacle only) CONTACTS INCLUDED SEE PAGE 187 SEE TABLE ON NEXT PAGE FOR PART DETAILS STEP 1 Choose Receptacle Style 1 POSITION 120A - 180A / 630V Number of Contacts: 1 Salt Spray: 48h Contact Size: 8mm Connector Solutions Shell Size: 16 Sealing: IP67 High Amperage eco|mate(R) rm with RADSOK(R) Technology * Single Pole High Power Arrangements * Current Rating at 25C: 180A * Flammability Rating: UL94-V0 * 8mm Contact Size * High Reliability * Operating Temperature: -40C to +125C * Low Contact Engagement / Separation Forces * RoHS Compliant * Operating Voltage: 630V * Low Contact Resistance * High Mating Cycle Durability Insert Arrangement Pin (Male) Faceview Connector Part Numbers Wire Range (mm) Connector Part Number Connector Type RTHP6161SNH25-PS3 Female Plug with Short Shielded Backshell 20-25 RTHP6161SNH35-PS2 Female Plug with Short Shielded Backshell RTHP6161SNH50-PS2 Contact Amps Figure Drawings Part Number Type AWG Plating 120 HS25CCS Crimp Barrel, Female 4 Silver 1 30-35 130 HS35CCS Crimp Barrel, Female 2 Silver 2 Female Plug with Short Shielded Backshell 45-50 180 HS50CCS Crimp Barrel, Female 2 Silver 3 RTHP6161SNH-35S2 Female Plug Straight, Crimp, Long Shielded Backshell 30-35 130 HS35CCS Crimp Barrel, Female 2 Silver 4 RTHP0161PN-35C Male Square Flange Receptacle Crimp 30-35 130 HP35CCS Crimp Barrel, Male 2 Silver 5,9 RTHP0161PN-50C Male Square Flange Receptacle with Crimp 40-50 130 HP50CCS Crimp Barrel, Male 2 Silver 6,9 RTHP0161PN-H1 Male Square Flange Receptacle Flat Tail N/A 180 HPCHS Flathole Tail, Male N/A Silver 7,9 RTHP0161PN-M1 Male Square Flange Receptacle with Screw Tail N/A 180 HPCSS Screw Tail, Male N/A Silver 8,9 Contacts included. See chart for specific requirements 187 Shell Size: 16 Sealing: IP67 Number of Contacts: 1 Salt Spray: 48h Contact Size: 8mm Dimensions Plug Plug with Short Shield Backshell Female Figure 1 RTHP6161SNH25-PS3 Plug with Short Shielded Backshell Female 188 Figure 3 RTHP6161SNH50-PS2 Plug with Short Shielded Backshell Female Figure 2 RTHP6161SNH35-PS2 Plug Straight, Crimp, Long Shielded Backshell Female Figure 4 RTHP6161SNH-35S2 1 POSITION 120A - 180A / 630V Number of Contacts: 1 Salt Spray: 48h Contact Size: 8mm Dimensions Square Flange Receptacle Square Flange Receptacle with Crimp Square Flange Receptacle Crimp Male Figure 5 RTHP0161PN-35C Male Square Flange Receptacle Flat Tail Male Figure 7 RTHP0161PN-H1 Figure 6 Connector Solutions Shell Size: 16 Sealing: IP67 RTHP0161PN-50C Square Flange Receptacle with Screw Tail Male Figure 8 RTHP0161PN-M1 Square Flange Receptacle Panel Cutout Figure 9 189 STEP 2 Choose Plug Style Square Flange Receptacles Plug RTHP6201SNH25-PS5 SEE TABLE ON NEXT PAGE FOR PART DETAILS RTHP0201PN-50C RTHP6201SNH35-PS2 RTHP0201PN-70C RTHP6201SNH50-PS2 RTHP0201PN-95C RTHP6201SNH70-PS1 RTHP0201PN-H1 RTHP6201SNH70-PS2 RTHP0201PN-M1 RTHP6201SNH95-PS2 190 CONTACTS SOLD SEPARATELY SEE PAGE 191 STEP 1 Choose Receptacle Style 1 POSITION 120A - 300A / 630V Number of Contacts: 1 Salt Spray: 48h Contact Size: 10mm Connector Solutions Shell Size: 20 Sealing: IP67 High Amperage eco|mate(R) rm with RADSOK(R) Technology * Single Pole High Power Arrangements * Current Rating at 25C: 300A * Flammability Rating: UL94-V0 * 10mm Contact Size * High Reliability * Operating Temperature: -40C to +125C * Low Contact Engagement / Separation Forces * RoHS Compliant * Operating Voltage: 630V * Low Contact Resistance * High Mating Cycle Durability Insert Arrangement Pin (Male) Faceview Connector Part Numbers Connector Type Wire Range (mm) Amps RTHP6201SNH25-PS5 Female Plug with Short Shielded Backshell 20-25 RTHP6201SNH35-PS2 Female Plug with Short Shielded Backshell RTHP6201SNH50-PS2 Connector Part Number Contact Figure Plating Drawings Part Number Type AWG 120 HS25DCS Crimp Barrel, Female 4 Silver 1 30-35 130 HS35DCS Crimp Barrel, Female 4 Silver 2 Female Plug with Short Shielded Backshell 40-50 180 HS50DCS Crimp Barrel, Female 1/0-0 Silver 3 RTHP6201SNH70-PS1 Female Plug with Short Shielded Backshell 60-70 250 HS70DCS Crimp Barrel, Female 2/0-0 Silver 4 RTHP6201SNH70-PS2 Female Plug with Short Shielded Backshell 60-70 250 HS70DCS Crimp Barrel, Female 2/0-0 Silver 5 RTHP6201SNH95-PS2 Female Plug with Short Shielded Backshell 85-95 300 HS95DCS Crimp Barrel, Female 3/0-0 Silver 6 RTHP0201PNH-50C Male Square Flange Receptacle Crimp 40-50 180 HP50DCS Crimp Barrel, Male 1/0-0 Silver 7,12 RTHP0201PNH-70C Male Square Flange Receptacle with Crimp 60-70 250 HP70DCS Crimp Barrel, Male 2/0-0 Silver 8,12 RTHP0201PNH-95C Male Square Flange Receptacle with Crimp 85-95 300 HP95DCS Crimp Barrel, Male 3/0-0 Silver 9,12 RTHP0201PNH-H1 Male Square Flange Receptacle with Flat Tail N/A 300 HPDHS Flathole Tail, Male N/A Silver 10,12 RTHP0201PNH-M1 Male Square Flange Receptacle with Screw Tail N/A 300 HPDSS Screw Tail, Male N/A Silver 11,12 Contacts included. See chart for specific requirements 191 Shell Size: 20 Sealing: IP67 Number of Contacts: 1 Salt Spray: 48h Contact Size: 10mm Dimensions Plug Plug with Short Shielded Backshell Female Figure 1 RTHP6201SNH25-PS5 Plug with Short Shielded Backshell Female Plug with Short Shielded Backshell Female 192 Figure 3 RTHP6201SNH50-PS2 Figure 2 RTHP6201SNH35-PS2 Plug with Short Shielded Backshell Female Figure 4 RTHP6201SNH70-PS1 1 POSITION 120A - 300A / 630V Number of Contacts: 1 Salt Spray: 48h Contact Size: 10mm Dimensions Plug (con't) Plug with Short Shielded Backshell Female Figure 5 RTHP6201SNH70-PS2 Plug with Short Shielded Backshell Female Figure 6 Connector Solutions Shell Size: 20 Sealing: IP67 RTHP6201SNH95-PS2 193 Shell Size: 20 Sealing: IP67 Number of Contacts: 1 Salt Spray: 48h Contact Size: 10mm Dimensions Square Flange Receptacle Square Flange Receptacle Crimp Male Figure 7 RTHP0201PN-50C Square Flange Receptacle with Crimp Male Square Flange Receptacle with Crimp Male 194 Figure 9 RTHP0201PN-95C Figure 8 RTHP0201PN-70C Square Flange Receptacle with Flat Tail Male Figure 10 RTHP0201PN-H1 1 POSITION 120A - 300A / 630V Number of Contacts: 1 Salt Spray: 48h Contact Size: 10mm Dimensions Square Flange Receptacle (con't) Square Flange Receptacle with Screw Tail Square Flange Receptacle Panel Cutout Connector Solutions Shell Size: 20 Sealing: IP67 Figure 12 Male Figure 11 RTHP0201PN-M1 Contacts Crimp Barrel Contact Flat Hole Tail Contact (receptacle only) Screw Tail Contact (receptacle only) 195 STEP 2 Choose Plug Style Square Flange Receptacles Plug RTHP6203PNH-16S2 RTHP0203PNH-16C Crimp Barrel Contact 196 RTHP6203SNH-16S2 RTHP0203SNH-16C Flat Hole Tail Contact (receptacle only) Screw Tail Contact (receptacle only) CONTACTS INCLUDED SEE PAGE 197 SEE TABLE ON NEXT PAGE FOR PART DETAILS STEP 1 Choose Receptacle Style 3 POSITIONS 86A / 630V Number of Contacts: 3 Salt Spray: 48h Contact Size: 3.6 mm Connector Solutions Shell Size: 20 Sealing: IP67 High Amperage eco|mate(R) rm with RADSOK(R) Technology * Single Pole High Power Arrangements * 3.6mm Contact Size * Operating Temperature: -40C to +125C * RoHS Compliant * Operating Voltage: 630V * Current Rating at 25C: 86A * Flammability Rating: UL94-V0 * High Reliability * Low Contact Engagement / Separation Forces * Low Contact Resistance * High Mating Cycle Durability Insert Arrangement Pin (Male) Faceview Wire Range (mm) Connector Part Number Connector Type RTHP6203PNH-16S2 Male 3 Position Plug with Shielded Backshell 10-16 RTHP6203SNH-16S2 Female 3 Position Plug with Shielded Backshell Contact Amps Figure Drawings Part Number Type AWG Plating 86 MP6ARS8S Crimp Barrel, Male 8 Silver 1 10-16 86 MS6ARS8S Crimp Barrel, Female 8 Silver 2 RTHP0203PNH-16C Male Square Flange Receptacle with Crimp 10-16 86 MP6ARS8S Crimp Barrel, Male Silver 3,5 RTHP0203SNH-16C Female Square Flange Receptacle with Crimp 10-16 86 MS6ARS8S Crimp Barrel, Female Silver 4,5 Contacts included. See chart for specific requirements 197 Shell Size: 20 Sealing: IP67 Number of Contacts: 3 Salt Spray: 48h Contact Size: 3.6 mm Dimensions Plug 3 Position Plug with Shielded Backshell Male 198 Figure 1 RTHP6203PNH-16S2 3 Position Plug with Shielded Backshell Female Figure 2 RTHP6203SNH-16S2 3 POSITIONS 86A / 630V Number of Contacts: 3 Salt Spray: 48h Contact Size: 3.6 mm Dimensions Square Flange Receptacle Square Flange Receptacle with Crimp Male Figure 3 RTHP0203PNH-16C Square Flange Receptacle with Crimp Female Figure 4 Connector Solutions Shell Size: 20 Sealing: IP67 RTHP0203SNH-16C Square Flange Receptacle Panel Cutout Figure 5 199 Contacts Contact Overview eco|mate(R) rm rugged metal shielded connectors and contacts are sold separately. The contacts are offered in 2 types: machined and stamped & formed. The machined contacts are available in 3 styles: Standard, RADSOK(R), and PCB. eco|mate(R) rm contacts are offered in multiple sizes and are designed to be used in any connector with the same active part size regardless of shell size. See our Connector Guide starting at page 6 for matching parts and contacts. Our customers can then choose to buy only one type of contact to equip all of their connectors, even if the shell sizes vary. Our standardized connector solutions makes it easy for our customers to reduce their costs and simplify assembly. The eco|mate(R) rm rugged metal shielded connectors and contacts are easy to install and remove. Machined contacts are generally chosen as a better solution for power applications or when lower quantities are needed. Stamped & Formed contacts are available automatically crimped, making them ideal for high volume production applications. Technical information about crimped contacts on page 233 200 Contacts Contacts Plating and Bulk Order Options Plating Options Symbol Plating T Tin Plated (For Stamped and Formed Contacts) S Silver Plated 5 Um (For Machined Contacts) F Gold Plated G5 Gold Plated (Thickness 5") G10 Gold Plated (Thickness 10") G15 Gold Plated (Thickness 15") G30 Gold Plated (Thickness 30") Contacts supplied separately Standard Quantity Order Options Stamped & Formed Machined * 25 pieces * 3000 pieces * 25 pieces * 1000 pieces * bulk package * reel * bulk package * bulk package Amphenol offers two types of electrical contacts: Machined Stamped & Formed 201 Contacts Stamped & Formed Crimped Contact Part Numbers Stamped & Formed Contacts Contact Size AWG Wire range mm Current (A) Electrical Resistance Insulation Diameter (mm) Plating 2.5mm 14-12 2.5-3.5 23 -- 4.3 16 (O1.6mm) 14 2.0-2.5 13 <6m 16 (O1.6mm) 14 2.0-2.5 13 16 (O1.6mm) 14 2.0-2.5 16 (O1.6mm) 14 16 (O1.6mm) PART NUMBER Male Female Tin SP12A1T SS12A1T 3.2 Gold Flash SP14M1F SS14M1F <6m 3.2 Gold 5" SP14M1G5 SS14M1G5 13 <6m 3.2 Gold 10" SP14M1G10 SS14M1G10 2.0-2.5 13 <6m 3.2 Gold 15" SP14M1G15 SS14M1G15 14 2.0-2.5 13 <6m 3.2 Gold 30" SP14M1G30 SS14M1G30 16 (O1.6mm) 18-16 .75-1.5 13 <6m 3.2 Gold Flash SP16M1F SS16M1F 16 (O1.6mm) 18-16 .75-1.5 13 <6m 3.2 Gold 5" SP16M1G5 SS16M1G5 16 (O1.6mm) 18-16 .75-1.5 13 <6m 3.2 Gold 10" SP16M1G10 SS16M1G10 16 (O1.6mm) 18-16 .75-1.5 13 <6m 3.2 Gold 15" SP16M1G15 SS16M1G15 16 (O1.6mm) 18-16 .75-1.5 13 <6m 3.2 Gold 30" SP16M1G30 SS16M1G30 16 (O1.6mm) 22-20 .34-.50 13 <6m 3.2 Gold Flash SP20M1F SS20M1F 16 (O1.6mm) 22-20 .34-.50 13 <6m 3.2 Gold 5" SP20M1G5 SS20M1G5 16 (O1.6mm) 22-20 .34-.50 13 <6m 3.2 Gold 10" SP20M1G10 SS20M1G10 16 (O1.6mm) 22-20 .34-.50 13 <6m 3.2 Gold 15" SP20M1G15 SS20M1G15 16 (O1.6mm) 22-20 .34-.50 13 <6m 3.2 Gold 30" SP20M1G30 SS20M1G30 16 (O1.6mm) 26-24 .14-.25 13 <6m 3.2 Gold Flash SP24M1F SS24M1F 16 (O1.6mm) 26-24 .14-.25 13 <6m 3.2 Gold 5" SP24M1G5 SS24M1G5 Available in Packages of 25 pieces or the Standard Reel Size of 3,000 pieces 202 Contacts Contacts Stamped & Formed Contact Part Numbers (con't) Stamped & Formed Contacts Contact Size AWG Wire range mm Current (A) Electrical Resistance Insulation Diameter (mm) Plating 16 (O1.6mm) 26-24 .14-.25 13 <6m 3.2 16 (O1.6mm) 26-24 .14-.25 13 <6m 16 (O1.6mm) 26-24 .14-.25 13 20 (O1.mm) 22-20 .34-.50 20 (O1.mm) 22-20 20 (O1.mm) PART NUMBER Male Female Gold 10" SP24M1G10 SS24M1G10 3.2 Gold 15" SP24M1G15 SS24M1G15 <6m 3.2 Gold 30" SP24M1G30 SS24M1G30 5 <15m 2.6 Gold Flash SP20W1F SS20W1F .34-.50 5 <15m 2.6 Gold 5" SP20W1G5 SS20W1G5 22-20 .34-.50 5 <15m 2.6 Gold 10" SP20W1G10 SS20W1G10 20 (O1.mm) 22-20 .34-.50 5 <15m 2.6 Gold 15" SP20W1G15 SS20W1G15 20 (O1.mm) 22-20 .34-.50 5 <15m 2.6 Gold 30" SP20W1G30 SS20W1G30 20 (O1.mm) 26-24 .14-.25 5 <15m 2.6 Gold Flash SP24W1F SS24W1F 20 (O1.mm) 26-24 .14-.25 5 <15m 2.6 Gold 5" SP24W1G5 SS24W1G5 20 (O1.mm) 26-24 .14-.25 5 <15m 2.6 Gold 10" SP24W1G10 SS24W1G10 20 (O1.mm) 26-24 .14-.25 5 <15m 2.6 Gold 15" SP24W1G15 SS24W1G15 20 (O1.mm) 26-24 .14-.25 5 <15m 2.6 Gold 30" SP24W1G30 SS24W1G30 20 (O1.mm) 30-28 .05-.08 5 <15m 2.6 Gold Flash SP28W1F SS28W1F 20 (O1.mm) 30-28 .05-.08 5 <15m 2.6 Gold 5" SP28W1G5 SS28W1G5 20 (O1.mm) 30-28 .05-.08 5 <15m 2.6 Gold 10" SP28W1G10 SS28W1G10 20 (O1.mm) 30-28 .05-.08 5 <15m 2.6 Gold 15" SP28W1G15 SS28W1G15 20 (O1.mm) 30-28 .05-.08 5 <15m 2.6 Gold 30" SP28W1G30 SS28W1G30 Available in Packages of 25 pieces or the Standard Reel Size of 3,000 pieces 203 Contacts PCB Contacts PCB Machined Contact Part Numbers Contact Size Description Plating 20 Short Version 20 204 PART NUMBER Male Female Gold Flash MP20W12E06F MS20W12E06F Short Version Gold 5" MP20W12E06G5 MS20W12E06G5 20 Short Version Gold 10" MP20W12E06G10 MS20W12E06G10 20 Short Version Gold 15" MP20W12E06G15 MS20W12E06G15 20 Short Version Gold 30" MP20W12E06G30 MS20W12E06G30 20 Long Version Gold Flash MP20W12E09F MS20W12E09F 20 Long Version Gold 5" MP20W12E09G5 MS20W12E09G5 20 Long Version Gold 10" MP20W12E09G10 MS20W12E09G10 20 Long Version Gold 15" MP20W12E09G15 MS20W12E09G15 20 Long Version Gold 30" MP20W12E09G30 MS20W12E09G30 16 Short Version Gold Flash MP16M12E06F MS16M12E06F 16 Short Version Gold 5" MP16M12E06G5 MS16M12E06G5 16 Short Version Gold 10" MP16M12E06G10 MS16M12E06G10 16 Short Version Gold 15" MP16M12E06G15 MS16M12E06G15 16 Short Version Gold 30" MP16M12E06G30 MS16M12E06G30 16 Long Version Gold Flash MP16M12E09F MS16M12E09F Contacts Contacts PCB Machined Contact Part Numbers (con't) Contact Size Description Plating 16 Long Version 16 PART NUMBER Male Female Gold 5" MP16M12E09G5 MS16M12E09G5 Long Version Gold 10" MP16M12E09G10 MS16M12E09G10 16 Long Version Gold 15" MP16M12E09G15 MS16M12E09G15 16 Long Version Gold 30" MP16M12E09G30 MS16M12E09G30 2.5 mm Short Version Gold Flash MP10B12E05F MS10B12E05F 2.5 mm Short Version Gold 5" MP10B12E05G5 MS10B12E05G5 2.5 mm Short Version Gold 10" MP10B12E05G10 MS10B12E05G10 2.5 mm Short Version Gold 15" MP10B12E05G15 MS10B12E05G15 2.5 mm Short Version Gold 30" MP10B12E05G30 MS10B12E05G30 2.5 mm Long Version Gold Flash MP10B12E08F MS10B12E08F 2.5 mm Long Version Gold 5" MP10B12E08G5 MS10B12E08G5 2.5 mm Long Version Gold 10" MP10B12E08G10 MS10B12E08G10 2.5 mm Long Version Gold 15" MP10B12E08G15 MS10B12E08G15 2.5 mm Long Version Gold 30" MP10B12E08G30 MS10B12E08G30 Available in Standard Package Sizes: 25 or 1,000 pieces PCB Soldering The PNPCF series can be used in a wave soldering process, but not in a reflow soldering process. All high temperature processes are prohibited. 205 Contacts PCB Contacts Dimensions Nominal Length G (mm) Dimensions of dipsolder contacts out of connector (contacts to be ordered separately) All dimensions are in mm xx=plating options Shell Size MP20W12E06xx MP20W12E09xx MP16M12E04xx MP16M12E06xx MP10B12E05xx MP10B12E08xx 10 4.0 9.5 4.0 8.0 -- -- 12 4.0 9.5 4.0 8.0 5.0 -- 14 4.0 9.5 4.0 8.0 5.2 -- 16 4.0 9.5 4.0 8.0 -- -- 18 -- 9.5 4.0 8.0 -- -- 20 -- 9.5 4.0 8.0 -- -- 24 -- -- -- 3.9 -- -- Shell Size 206 Pin Contact Socket Contact MS20W12E06xx MS20W12E09xx MS16M12E04xx MS16M12E06xx MS10B12E05xx MS10B12E08xx 10 3.3 8.5 2.4 3.0 -- -- 12 3.3 8.5 2.4 3.0 -- -- 14 3.3 8.5 2.4 3.0 -- -- 16 3.3 8.5 2.4 3.0 -- -- 18 -- 8.5 2.4 -- -- -- 20 -- 8.5 2.4 -- -- -- 24 -- -- -- -- -- -- Contacts Contacts Machined Standard Crimp Contact Part Numbers Machined Contacts Contact Size AWG Wire Range mm Plating Electrical Resistance 8 (O3.6mm) 12-10 3.0-6.0 Silver 16 (O1.6mm) 14 2.0-2.5 16 (O1.6mm) 14 16 (O1.6mm) Part Number Male Female <5m MP10A23S MS10A23S Gold Flash <6m MP14M23F MS14M23F 2.0-2.5 Gold 5" <6m MP14M23G5 MS14M23G5 14 2.0-2.5 Gold 10" <6m MP14M23G10 MS14M23G10 16 (O1.6mm) 14 2.0-2.5 Gold 15" <6m MP14M23G15 MS14M23G15 16 (O1.6mm) 14 2.0-2.5 Gold 30" <6m MP14M23G30 MS14M23G30 16 (O1.6mm) 18-16 .75-1.5 Gold Flash <6m MP16M23F MS16M23F 16 (O1.6mm) 18-16 .75-1.5 Gold 5" <6m MP16M23G5 MS16M23G5 16 (O1.6mm) 18-16 .75-1.5 Gold 10" <6m MP16M23G10 MS16M23G10 16 (O1.6mm) 18-16 .75-1.5 Gold 15" <6m MP16M23G15 MS16M23G15 16 (O1.6mm) 18-16 .75-1.5 Gold 30" <6m MP16M23G30 MS16M23G30 16 (O1.6mm) 22-20 .34-.50 Gold Flash <6m MP20M23F MS20M23F 16 (O1.6mm) 22-20 .34-.50 Gold 5" <6m MP20M23G5 MS20M23G5 16 (O1.6mm) 22-20 .34-.50 Gold 10" <6m MP20M23G10 MS20M23G10 16 (O1.6mm) 22-20 .34-.50 Gold 15" <6m MP20M23G15 MS20M23G15 16 (O1.6mm) 22-20 .34-.50 Gold 30" <6m MP20M23G30 MS20M23G30 continued on next page 207 Contacts Machined Standard Crimp Contact Part Numbers(con't) Contact Size AWG Wire Range mm Plating Electrical Resistance 16 (O1.6mm) 26-24 .14-.25 Gold Flash 16 (O1.6mm) 26-24 .14-.25 16 (O1.6mm) 26-24 16 (O1.6mm) Part Number Male Female <6m MP24M23F MS24M23F Gold 5" <6m MP24M23G5 MS24M23G5 .14-.25 Gold 10" <6m MP24M23G10 MS24M23G10 26-24 .14-.25 Gold15" <6m MP24M23G15 MS24M23G15 16 (O1.6mm) 26-24 .14-.25 Gold 30" <6m MP24M23G30 MS24M23G30 20 (O1.mm) 22-20 .34-.50 Gold Flash <15m MP20W23F MS20W23F 20 (O1.mm) 22-20 .34-.50 Gold 5" <15m MP20W23G5 MS20W23G5 20 (O1.mm) 22-20 .34-.50 Gold 10" <15m MP20W23G10 MS20W23G10 20 (O1.mm) 22-20 .34-.50 Gold 15" <15m MP20W23G15 MS20W23G15 20 (O1.mm) 22-20 .34-.50 Gold 30" <15m MP20W23G30 MS20W23G30 20 (O1.mm) 26-24 .13-.25 Gold Flash <15m MP24W23F MS24W23F 20 (O1.mm) 26-24 .13-.25 Gold 5" <15m MP24W23G5 MS24W23G5 20 (O1.mm) 26-24 .13-.25 Gold 10"" <15m MP24W23G10 MS24W23G10 20 (O1.mm) 26-24 .13-.25 Gold 15" <15m MP24W23G15 MS24W23G15 20 (O1.mm) 26-24 .13-.25 Gold 30" <15m MP24W23G30 MS24W23G30 20 (O1.mm) 30-28 .05-.08 Gold Flash <15m MP28W23F MS28W23F 20 (O1.mm) 30-28 .05-.08 Gold 5" <15m MP28W23G5 MS28W23G5 20 (O1.mm) 30-28 .05-.08 Gold 10" <15m MP28W23G10 MS28W23G10 20 (O1.mm) 30-28 .05-.08 Gold 15" <15m MP28W23G15 MS28W23G15 20 (O1.mm) 30-28 .05-.08 Gold 30" <15m MP28W23G30 MS28W23G30 Available in Standard Package Sizes: 25 or 1,000 pieces 208 Contacts RADSOK(R) Benefits at a Glance * High number of mating cycles * Reduced assembly effort * Contact coverage up to 65% * Long lasting contact normal forces guaranteed through optimal grid technology * Self cleaning effect during the mating process * Cost effective production using stamp & form technology * Fully automated production for full press capability * No torque resistance required of electrical housing - allowing for easier designs * Low insertion and extraction forces * Absorption of vibrations Contacts RADSOK(R) Contacts RADSOK(R) Technical Data High Reliability Unique RADSOK(R) design and construction technology creates an electrical contact interface that exceeds typical interconnect requirements. Applications in Aerospace, Medical, Industrial, Automotive, Mining, Offshore and other harsh environments depend on the high reliability of Amphenol RADSOK(R) technology. Crimp Barrel Contact Low Contact Engagement/Separation Forces The hyperbolic lamella socket contact construction distributes normal forces over a high percentage of the mating surface. This creates a smooth, even engagement effort. This force distribution also contributes to excellent performance in vibration applications with resistance to typical fretting corrosion. Flat Hole Tail Contact Low Contact Resistance The large interface between the socket lamella and pin surface result in very low contact resistance, enabling the RADSOK(R) contacts high current ratings compared to traditional power contact designs. Screw Tail Contact High Mating Cycle Durability RADSOK(R) contacts with typical silver plating finishes have demonstrated survival of 10,000 mating cycles. Even with continuous exposure to harsh environmental abuse (salt, sand and high humidity), RADSOK(R) contacts have been tested to maintain low contact resistance beyond 10,000 mating cycles. For more technical information about RADSOK(R) see page 226 209 Contacts RADSOK(R) Machined Contact Part Numbers Contact Size Description Wire Range AWG Wire range mm Plating Electrical Resistance 3.6mm Crimp Barrel 8 10-16 Silver 3.6mm Crimp Barrel 8 8-10 3.6mm Screw Tail N/A 3.6mm Flathole Tail 6mm PART NUMBER Male Female <1.0m MP6ARS8S MS6ARS8S Silver <1.0m HP10ACS HS10ACS N/A Silver <1.0m HPASS HSASS N/A N/A Silver <1.0m HPAHS HSAHS Crimp Barrel 4 20-25 Silver <1.0m HP25BCS HS25BCS 6mm Screw Tail N/A N/A Silver <1.0m HPBSS HSBSS 6mm Flathole Tail N/A N/A Silver <1.0m HPBHS HSBHS 8mm Crimp Barrel 4 20-25 Silver <1.0m -- HS25CCS 8mm Crimp Barrel 2 30-35 Silver <1.0m HP35CCS HS35CCS 8mm Crimp Barrel 2 30-35 Silver <1.0m HP50CCS HS50CCS 8mm Screw Tail N/A N/A Silver <1.0m HPCSS HSCSS 8mm Flathole Tail N/A N/A Silver <1.0m HPCHS HSCHS 10mm Crimp Barrel 4 20-25 Silver <1.0m -- HS25DCS 10mm Crimp Barrel 2 30-35 Silver <1.0m -- HS35DCS 10mm Crimp Barrel 1/0-1 40-50 Silver <1.0m HP50DCS HS50DCS 10mm Crimp Barrel 2/0-1 60-70 Silver <1.0m HP70DCS HS70DCS 10mm Crimp Barrel 3/0-1 85-95 Silver <1.0m HP95DCS HS95DCS 10mm Screw Tail N/A N/A Silver <1.0m HPDSS HSDSS 10mm Flathole Tail N/A N/A Silver <1.0m HPDHS HSDHS Available in Standard Package Size: 25 or 1,000 pieces Field of Application Amperage for RADSOK(R) Machined Contacts Amperage RTHP / RADSOK(R) Connectors starting at page 181 Contact Size 25 C 3.6mm 86 A 6mm 120A 8mm 180 A 10mm 300 A All technical data has been measured in a laboratory environment and can be different during practical usage of the product. Any product information is for descriptive usage only and not legally binding. In particular, the information does not constitute or provide any legal guarantees. 210 eco | mate(R) rm Technical Information Tooling Machined _________________________________________________________________________________________ 212 Stamped & Formed ________________________________________________________________________________ 212 Contact Extraction Tool ____________________________________________________________________________ 212 Contact Extraction Tool Table _______________________________________________________________________ 213 Contact Extraction Tool Instruction __________________________________________________________________ 214 Technical Information Rugged Metal Shielded Connectors Assembly Instructions Jam Nut Assembly and Installation Instructions _______________________________________________________ 215 Flange Assembly and Installation Instructions ________________________________________________________ 216 eco|mate(R) rm Standard Product Straight Plug and Receptacle Cable Assembly _____________________ 217 eco|mate(R) rm Standard Product Straight Plug and Receptacle with End Cap ________________________ 219 eco|mate(R) rm Standard Product Right Angle Plug and Receptacle Cable Assembly __________________ 220 eco|mate(R) rm High Amperage Straight Plug Cable Assembly _______________________________________ 222 eco|mate(R) rm High Amperage Straight Plug - Shell Size 12 Cable Assembly __________________________ 223 eco|mate(R) rm High Amperage 90 Plug Cable Assembly ____________________________________________ 224 Technical Data RADSOK(R) Product Overview _______________________________________________________________________ 226 RADSOK(R) Advantages and Custom Developed Solutions ___________________________________________ 227 RADSOK(R) Series Rated Current and Working Voltage _______________________________________________ 228 RADSOK(R) Series Dynamic Overload Tests at Different Temperatures __________________________________ 229 eco|mate(R) rm Standard Product Rated Current and Working Voltage _______________________________ 230 UL94 + UL1977 Industry Standards ___________________________________________________________________ 231 IP Codes ___________________________________________________________________________________________ 232 Crimp Connection _________________________________________________________________________________ 233 Composition and Dimensions of Copper Wires _______________________________________________________ 234 Reduction Values __________________________________________________________________________________ 235 Voltage Grading of Connectors ____________________________________________________________________ 236 Creepage Distance ________________________________________________________________________________ 237 211 Tooling Machined Hand Crimp Tool for Machine Contacts Pneumatic Crimp Tool for Machined Contacts MFX-3959 MFX-3960 Stamped & Formed Crimp Die for Stamped & Form Contact MFX-3957 MFX-3962 Hand Tool, Stamped & Form Contact, 16 AWG Hand Tool, Stamped & Form Contact, 20 AWG MFX-3954 MFX-3958 Contact Extraction Tool Contact Extraction Tool 212 Hand Tool, Stamped & Form Contact, 2.5 mm Part Number Description QRT08R 3.6 mm contacts QXRT08 3.6 mm contacts QXRT125 (eco|mate(R) rm High Amperage) 2.5 mm contacts QXRT16 #16 contacts QXRT20 #20 contacts Contact Extraction Tool Table Contact Size 2.5 mm 3.6mm 6 mm 8 mm 10 mm 8 Contact Part Number Contact Size 20 Extraction Tool Male Female SP12A1T SS12A1T HP10ACS HS10ACS HP10AHS HS10AHS HP10ASS HS10ASS HP25BCS HS25BCS HP25BHS HS25BHS HP25BSS HS25BSS HP35CSS HS35CSS HP35CCS HS35CCS HP35CHS HS35CHS HP50DCS HS50DCS HP50DHS HS50DHS HP50DSS HS50DSS MP10A23S MS10A23S Extraction Tool QXRT20 Contact Part Number QXRT125 QRT0BR N/A N/A N/A N/A Male Female MP20W23F MS20W23F SP20W1F SS20W1F SP20W1G5 SS20W1G5 MP20W23G5 MS20W23G5 SP20W1G10 SS20W1G10 MP20W23G10 MS20W23G10 MP20W23G15 MS20W23G15 SP20W1G15 SS20W1G15 MP20W23G30 MS20W23G30 SP20W1G30 SS20W1G30 MP24W23F MS24W23F SP24W1F SS24W1F SP24W1G5 SS24W1G5 MP24W23G5 MS24W23G5 SP24W1G10 SS24W1G10 Contact Size 16 Contact Size 16 (con't) MP24W23G10 MS24W23G10 Extraction Tool QXRT16 Extraction Tool QXRT16 MP24W23G15 MS24W23G15 Contact Part Number Contact Part Number SP24W1G15 SS24W1G15 Male Female Male Female SP24W1G30 SS24W1G30 MS24W23G30 MP14M23F MS14M23F SP20M1F SS20M1F MP24W23G30 SP14M1F SS14M1F MP20M23F MS20M23F MP28W23F MS28W23F SP28W1F SS28W1F MP14M23FG5 MS14M23G5 SP20M1G5 SS20M1G5 MP20M23G5 MS20M23G5 SP28W1G5 SS28W1G5 MS28W23G5 SP14M1G5 SS14M1G5 SP14M1G10 SS14M1G10 SP20M1G10 SS20M1G10 MP28W23G5 MP14M23FG10 MS14M23G10 MP20M23G10 MS20M23G10 SP28W1G10 SS28W1G10 SP14M1G15 SS14M1G15 SP20M1G15 SS20M1G15 MP28W23G10 MS28W23G10 MS28W23G15 SS28W1G15 MP14M23FG15 MS14M23G15 MP20M23G15 MS20M23G15 MP28W23G15 MP14M23G30 MS14M23G30 SP20M1G30 SS20M1G30 SP28W1G15 SP14M1G30 SS14M1G30 MS20M23G30 SP28W1G30 SS28W1G30 MP28W23G30 MS28W23G30 MP20M23G30 MP16M23F MS16M23F SP24M1F SS24M1F SP16M1F SS16M1F MP24M23F MS24M23F MP16M23G5 MS16M23G5 SP24M1G5 SS24M1G5 SP16M1G5 SS16M1G5 MP24M23G5 MS24M23G5 SP16M1G10 SS16M1G10 MP24M23G10 MS24M23G10 MP16M23G10 MS16M23G10 SP24M1G10 SS24M1G10 SP16M1G15 SS16M1G15 MP24M23G15 MS24M23G15 MP16M23G15 MS16M23G15 SP24M1G15 SS24M1G15 SP16M1G30 SS16M1G30 MP24M23G30 MS24M23G30 MP16M23G30 MS16M23G30 SP24M1G30 SS24M1G30 Technical Information Tooling 213 Tooling Contact Extraction Tool Instruction Extraction tool Contacts Step 1 Put extraction tool into insert Step 3 214 Step 2 Push the handle to take out the contacts Connector Step 4 Technical Information Assembly Instructions Jam Nut Assembly and Installation Instructions Remove insulation from wires and terminate contacts Push contacts into connector insert Seat o-ring, install and fasten receptacle in the panel cut-out Tighten jam nut Panel thickness max (3.2mm) Amph en 1. 2. 3. 4. Jam Nut O-ring Shell Size Jam Nut torque Exterior jam nut (Nm) dim. (min) O Wire max (mm) Panel thickness max (mm) 10 3.4-4.1 22.2 3.2 3.2 12 5.2-5.6 27.0 3.2 3.2 14 6.2-6.8 32.0 3.2 3.2 16 7.9-8.5 33.3 3.2 3.2 18 9.0-9.6 36.5 3.2 3.2 20 10.2-10.7 39.7 3.2 3.2 22 11.3-12.4 42.9 3.2 3.2 24 12.4-13.6 46.0 3.2 3.2 215 Assembly Instructions Flange Assembly and Installation Instructions Front Assembly Shell Receptacle flange Size Gasket Amphenol Amphe 3mm max Panel Rear Assembly Gasket Amphenol Amph e 3mm max Receptacle flange Panel thickness: 2.5 mm max 1. 2. 3. 4. 216 Remove insulation from wires and terminate contacts Push contacts into connector insert Install and fasten receptacle in the panel cutout For increased sealing of the system, use optional gasket Screw tightening torque (Nm) 10 0.30/0.40 12 0.30/0.40 14 0.30/0.40 16 0.30/0.40 18 0.35/0.45 20 0.50/0.60 22 0.55/0.65 24 0.55/0.65 Technical Information Assembly Instructions eco|mate(R) rm Straight Plug and Receptacle Cable Assembly Step 1: Slide parts onto cable Step 2: Strip jacket Table 1 Step 3: Attach tie-wrap Shell Size L1 (long back shell) L1 (short back shell) 10 25~30 mm 20~25 mm 12 30~35 mm 25~30 mm 14 30~35 mm 25~30 mm 16 35~40 mm 30~35 mm 18 35~40 mm 30~35 mm Dimensions are for reference only * Make sure exposed shielding is not nickedor cut Step 4: Trim tie-wrap Table 2 Contact Size Step 5: Trim braided shield flush to edge of tie-wrap Step 7: Attach contacts to wire leads L2 (stamped) L2 (machined) 8# NA 7.5~8.5 mm 12# 8.2~9.2 mm 8.5~9.5 mm 16# 5.0~5.5 mm 7.5~8.5 mm 20# 5.5~6.0 mm 7.0~8.0 mm Step 6: Strip to conductor Step 8: Crimp contacts 217 Assembly Instructions eco|mate(R) rm Straight Plug and Receptacle Cable Assembly (con't) Step 9: Insert contacts into connector cavities Step 10: Assemble back shell Step 11: Push shielding clip into backshell Table 3 Step 12: Push cable grommet into backshell Size Torque=T1 (N.m) 10 1.5~2.5 N.m 12 2.5~4.0 N.m 14 2.5~4.0 N.m 16 3.0~4.5 N.m 18 3.0~4.5N.m Step 13: Tighten metal nut Table 4 Step 14 Mate receptacle & plug (align the master key) Size Torque=T2 (N.m) 10 2.0~3.0 N.m 12 3.0~5.0 N.m 14 3.5~5.5 N.m 16 4.0~6.0 N.m 18 5.0~8.0 N.m Assembled Dimensions 218 Shell Size Plug with socket match with long cord grip Plug with socket match with short cord grip Plug with pin match with long cord grip Plug with pin match and short cord grip 10 43.0mm 33.0mm 38.0mm 28.0mm 12 45.0mm 35.0mm 35.0mm 25.0mm 14 45.0mm 35.0mm 35.0mm 25.0mm 16 45.0mm 35.0mm 40.0mm 30.0mm 18 48.0mm 39.0mm 40.0mm 32.0mm Technical Information Assembly Instructions eco|mate(R) rm Straight Plug and Receptacle with End Cap Step 2: Attach contacts to wire leads Step 1: Strip insulator Table 2 Contact Size L2 (stamped) L2 (machined) 8# NA 7.5~8.5 mm 12# 8.2~9.2 mm 8.5~9.5 mm 16# 5.0~5.5 mm 7.5~8.5 mm 20# 5.5~6.0 mm 7.0~8.0 mm Step 3: Crimp contacts Step 4: Insert contacts into connector cavities Step 5: Mate plug and receptacle (align the master key) 219 Assembly Instructions eco|mate(R) rm Right Angle Plug and Receptacle Cable Assembly Step 1: Slide parts onto cable Step 2: Strip jacket Table 5 Size L5 (90 cord grip) 10 NA 12 60~65 mm 14 60~65 mm 16 65~70 mm 18 NA * Make sure exposed shielding is not nicked or cut Dimensions are for reference only Step 3: Attach tie-wrap Step 4: Trim tie-wrap Table 2 Contact Size Step 5: Trim braided shield flush to edge of tie-wrap Step 7: Attach contacts to wire leads 220 L2 (stamped) L2 (machined) 8# NA 7.5~8.5 mm 12# 8.2~9.2 mm 8.5~9.5 mm 16# 5.0~5.5 mm 7.5~8.5 mm 20# 5.5~6.0 mm 7.0~8.0 mm Step 6: Strip to conductor Step 8: Crimp contacts Technical Information Assembly Instructions eco|mate(R) rm Right Angle Plug and Receptacle Cable Assembly (cont.) Step 9: Insert contacts into connector cavities Step 10: Assemble back shell Step 11: Push shielding clip into backshell Step 12 Push cable grommet into backshell Table 4 Step 13: Tighen metal nut Size Torque= T2 (N.m) 10 2.0-3.0 N.m 12 3.0-5.0 N.m 14 3.5-5.5 N.m 16 4.0-6.0 N.m 18 5.0-8.0 N.m Step 14: Male receptacle & plug (align the master key) 221 Assembly Instructions eco|mate(R) rm High Amperage Straight Plug Cable Assembly Step 1: Slide components onto cable Step 2: Strip jacket * Make sure exposed shielding is not nicked or cut Step 4: Wrap foil over braided shielding Step 3: Fold braided shielding over jacket Step 5: Strip to conductor Step 6: Slide onto conductor and crimp Step 7: Slide plug onto barrel Step 8: Attach and tighten plug as shown Data Chart Step 9: Attach and tighten backshell as shown 222 Instruction Shell 14 Shell 16 Shell 20 Dimension "A" 25 mm 25 mm 30 mm SW "B" 24 mm 28 mm 32 mm SW "C" 24.5 mm 29 mm 32.5 mm Technical Information Assembly Instructions RTHP SERIESTM Straight Plug - Shell Size 12 Cable Assembly Step 2: Strip jacket to braided shielding and attach tie wrap Step1: Slide parts onto cable Step 3: Cut tie wrap to remove excessive material. Trim shielding flush to edge of tie wrap Step 4: Strip to conductor Step 6: Slide plug onto crimped terminal assembly Step 5: Crimp terminal to conductor Step 7: Tighten plug to backhell. Perform pull test to assure correct contact assembly Step 8: Insert shielding clip and cable grommet. Attach and tighten back-nut to backshelll SW20 Torque value 3-5 N.M 223 Assembly Instructions eco|mate(R) rm High Amperage 90 Plug Cable Assembly Step 1: Strip jacket to metal braiding Step 3: Trim tie-wrap Step 5: Trim jacket to conductor 224 Step 2: Attach tie wrap and trim braiding flush to edge of tie-wrap Step 4: Push cable into backshell. Slide components onto cable Step 6: Slide heat shrink tubing onto cable eco|mate(R) rm High Amperage 90 Plug Cable Assembly (cont.) Step 8: Heat shrink tube over crimp Step 7: Crimp barrel to conductor Technical Information Assembly Instructions Step 10: Attach plug to backshell Step 9: Step 11: Insert shielding clip and cable grommet. Tighten connector to backshell as shown Step 12: Attach cable-nut to backshell and tighten as shown SW "B" Torque value 2-3.5N.M Data Chart Instruction Shell 12 Shell 14 Shell 16 Dimension "A" 10 mm 15 mm 15 mm SW "B" 22 mm 25 mm 28 mm SW "C" 22 mm 22 mm 25 mm 225 Technical Data RADSOK(R) Product Overview The RADSOK(R) Design * Socket cylinder within female contact has several equally spaced longitudinal beams twisted into a hyperbolic shape * As a male pin is inserted, axial members in the female half deflect, imparting high current flow across the connection with minimal voltage loss * The hyperbolic, stamped grid configuration ensures a large, coaxial, face-to-face surface area engagement * Ideal for crimp termination applications requiring repeated mating cycles and high current with a low multi-volt drop RADSOK(R) technology is based upon a stamped and formed flat grid, uniquely twisted into a hyperbolic geometry to provide robust, high density contact to the mating pin contact. Most pin and socket technologies rely on spring (beam element) properties of the contact elements, which tend to weaken over time. Unlike most other pin and socket solutions, the RADSOK(R)contact also utilizes the tensile strength properties of the flat, high conductivity alloy grid. This provides the high normal forces required for conductivity while also providing a large conductive surface area. Correspondingly low voltage drop and low temperature rise are also achieved while maintaining low insertion forces. RADSOK(R) Contact (Max. current carrying capacity meet DIN EN 60512 specification.) Shell size Applicable Cable Contact Plating current (AC) temperature 12 (3.6mm) 10mm, 16mm Silver Plated 65A (10mm), 86A (16mm) 14 (6.0mm) 25mm Silver Plated 120A (25mm) 16 (8.0mm) 35mm, 50mm Silver Plated 130A (35mm), 180A (50mm) 20 (10.0mm) 50mm, 70mm, 95mm Silver Plated 180A (50mm), 250A (70mm), 300A (95mm) Note: The given electrical values correspond to a single contact. With the addition of a housing, an increased number of poles or other modifications, the values must be adjusted downwards accordingly. 226 RADSOK(R) Advantages and Custom Developed Solutions RADSOK(R) Technology Advantages * High Reliability - Unique design and construction technology create an electrical contact interface that exceeds typical interconnect requirements. Technical Information Technical Data * Low Contact Engagement/Separation Forces - The hyperbolic lamella socket contact construction distributes normal forces over a high percentage of the mating pin surface. This creates a smooth, even engagement effort. This force distribution also contributes to excellent performance in vibration applications with resistance to typical fretting corrosion. * Low Contact Resistance - The large interface area between the socket lamella and pin surface result in very low contact resistance, enabling the RADSOK(R) contacts high current ratings compared to traditional power contact designs. * High Mating Cycle Durability - RADSOK(R) contacts with typical silver plating finishes have demonstrated survival of 20,000 mating cycles. Specialized plating and contact lubricants can extend cycle life to 200,000 matings or higher. Even with continuous exposure to harsh environmental abuse, RADSOK(R) contacts have been tested to maintain low contact resistance beyond 10,000 mating cycles. Standard and Custom-Developed Solutions * In addition to the various standard sizes of RADSOK(R) components, custom-developed solutions are also available. Amphenol has the global design, engineering and manufacturing resources to provide RADSOK(R) sockets pressed into basbars, crimped to cables, assembled into connectors, assembled into customer or Amphenol designed specialized electrical devices, or as stand-alone components. Amphenol also manufactures a full compliment of mating pin contacts for any application. * Steady-state current capacities for RADSOK(R) products range from 50 amps to over 1000 amps. * Amphenol connectors with RADSOK(R) contacts are offered with a variety of positive locking features (HiLok(R) and SurLok(R) ) that insure and maintain fully mated connections. * Sealing (SealtacTM) and high voltage hot break options are available within the RADSOK(R) itself or within a very wide range of IP rated connector housings to provide environmental protection to the contact area. 227 Technical Data RADSOK(R) Series Rated Current and Working Voltage Contact Current Carrying Capacity Derating 3.6mm Derating 8mm 228 Derating 6mm Derating 10mm RADSOK(R) Series Dynamic Overload Tests at Different Temperatures 6mm RADSOK(R) Technical Information Technical Data 8mm RADSOK(R) 229 Technical Data eco|mate(R) rm Rated Current and Working Voltage Current Carrying Capacity 230 UL94 + UL1977 Industry Standards There are two main standards for electrical conductors: UL94 and UL1977. UL94 - The standard for safety of flammability of plastic material for parts in devices and appliance testing. The eco|mate(R) rm series has been rated at V-0 Technical Information Technical Data The Test Program: Specimen is orientated in a vertical position and is subjected to a flame for ten seconds, then removed. Once the specimen has stopped burning, the flame is then reapplied for another ten seconds and then removed. V-0 Vertical Burning * Specimen self extinguishes within 10 seconds after each test flame application * Specimen must not drip flaming particles that ignite the cotton indicator UL1977 - The standard for connectors used in data, signal, control and power applications-component. ECBT2 - A standard of UL1977 covering single and multi-pole connectors. Intended for factory assembly, includes devices that are incomplete in certain constructional features or are restricted in performance capabilities and are intended for use as components of complete equipment submitted for investigation rather than for direct separate installation in the field. The final acceptance of the component is dependent upon its installation and use in complete equipment submitted to UL. 231 Technical Data IP Codes CODE LETTERS international protection FIRST NUMBER foreign bodies protection IP67 1st digit Brief description Definition 2nd digit Brief Description Definition 0 Non-protected -- 0 Non-protected -- 1 Protected against access to hazardous parts with the back of a hand. Protected against solid foreign objects of 50mm O. The probe, sphere of 50mm O, shall not fully penetrate and shall have adequate clearance from hazardous parts. 1 Protected against vertically falling water drops Vertically falling drops shall have no harmful effects. 2 Protected against access to hazardous parts with a finger. Protected against solid foreign objects of 12,5mm O. The jointed test finger of 12mm O, 80mm length, shall have adequate clearance from hazardous parts. The probe, sphere of 12,5mm O, shall not fully penetrate. 2 Protected against vertically falling water drops when enclosure tilted up to 15 Vertically falling drops shall have no harmful effects when the enclosure is tilted at any angel up to 15 . 3 Protected against access to hazardous parts with a tool. Protected against solid foreign objects of 2,5mm O. The probe of 2,5mm O shall not penetrate at all. 3 Protected against spraying water Water sprayed at any angle up to 60 shall have no harmful effects. 4 Protected against access to hazardous parts with a wire. The probe of 1mm O shall not penetrate at all. 4 Protected against splashing water Water splashed against the enclosure from any direction shall have no harmful effects. 5 Protected against access to hazardous parts with a wire. Dust-protected. The probe of 1mm O shall not penetrate. Intrusion of dust is not totally prevented, but dust shall not penetrate in a quantity to interfere with satisfactory operation of the device or to impair safety. 5 Protected against water jets Water projected in jets against the enclosure from any direction shall have no harmful effects. 6 Protected against access to hazardous parts with a wire Dust-tight. The probe of 1mm O shall not penetrate. No intrusion of dust. 6 Protected against powerful water jets Water projected in powerful jets against the enclosure from any direction shall have no harmful effects. 7 Protected against the effects of temporary immersion in water Intrusion of water in quantities causing harmful effects shall not be possible when the enclosure is temporarily immersed in water for 30 min. in 1m depth. 8 Protected against the effects of continuous immersion in water Intrusion of water in quantities causing harmful effects shall not be possible when the enclosure is continuously immersed in water under conditions which shall be agreed between manufacturer and user but which are more severe than for numeral 7. Protected against water during high pressure/steam jet cleaning Water projected in powerful jets with high pressure and heat against the enclosure from any direction shall have no harmful effects. Electrical connector devices have to be protected for safety reasons from outside influences like dust, foreign objects, direct contact, moisture and water. This protection is provided on industrial connectors by the housing latching devices and sealed cable entries. The degree of protection depends on the type of intended use. The standard IEC 60529 and/or DIN EN 60529 has specified the degree of protection and divided them into several classes. The attached charts gives an overview of all of the protection degrees. 232 SECOND NUMBER water protection 9K1) Crimp Connection Crimp connection Technical Information Technical Data Chart 2: Tensile strength for crimp connections A crimp connection is a non-detachable electrical connection between a wire and a crimp contact produced with the crimp technology. Precise crimping dies are matched to the crimp barrel and the wire size and a defined deformation results in a reliable electrical connection. There are open barrels (stamped contacts) and closed crimp barrels (turned contacts). The main advantages of crimp connections are: * Efficient termination of contacts. * Reproducible electrical and mechanical figures by a constant crimp quality. The requirements for crimp connections are defined in DIN EN 60352-2. An important point for the quality of a crimp connection is the achieved tensile strength of the termination. Measuring the tensile strength is a practical means for quality control purposes. Chart 2 below shows the required minimum tensile strength for open and closed barrels according to the wire size. Wire size Tensile strength mm2 AWG 0.05 30 6 0.08 28 11 0.12 26 15 N 1) 0.14 18 0.22 24 28 0.25 32 0.32 22 40 0.5 20 60 0.75 85 0.82 18 90 1.0 108 1.3 16 135 1.5 150 2.1 14 200 2.5 230 3.3 12 275 4.0 310 5.3 10 355 6.0 360 8.4 8 370 10.0 380 Cross reference AWG - mm2 The chart below allows a cross reference between American Wire Gauge (AWG) and metric wire sizes (mm2). Chart 3 AWG Wire composition Leiter-O Wire size AWG 30 1 x 0.25 0.25 mm 0.05 mm2 20 7 x 0.10 0.36 mm 0.06 mm2 28 1 x 0.32 0.32 mm 0.08 mm2 7 x 0.13 0.38 mm 0.09 mm2 26 1 x 0.40 0.40 mm 0.13 mm2 7 x 0.16 0.48 mm 0.14 mm2 24 22 18 16 Wire composition Leiter-O Wire size 1 x 0.81 0.81 mm 0.52 mm2 7 x 0.32 0.97 mm 0.56 mm2 19 x 0.20 1.02 mm 0.62 mm2 1 x 1.02 1.02 mm 0.79 mm2 19 x 0.25 1.27 mm 0.96 mm2 19 x 0.29 1.44 mm 1.23 mm2 19 x 0.10 0.51 mm 0.15 mm2 14 19 x 0.36 1.80 mm 1.95 mm2 1 x 0.51 0.51 mm 0.21 mm2 12 19 x 0.46 2.29 mm 3.09 mm2 7 x 0.20 0.61 mm 0.23 mm2 10 37 x 0.40 3.10 mm 4.60 mm2 8.80 mm2 19 x 0.13 0.64 mm 0.24 mm2 8 133 x 0.29 4.0 mm 1 x 0.64 0.64 mm 0.33 mm2 6 133 x 0.36 5.5 mm 7 x 0.25 0.76 mm 0.36 mm2 19 x 0.16 0.81 mm 0.38 mm2 It has to be noted that wires of the same AWG number but with different composition have slightly different mm2. 233 Technical Data Composition and Dimensions of Copper Wires Chart 4: Composition and Dimensions of Copper Wires Wire Size Wire Composition Wire diameter 0.09 mm2 0.14 mm2 12 x 0.10 0.48 mm 18 x 0.10 0.50 mm 0.25 mm2 0.34 mm2 14 x 0.15 0.70 mm 7 x 0.25 0.78 mm 0.5 mm2 0.75 mm2 16 x 0.20 1.0 mm 24 x 0.20 1.2 mm 1.0 mm2 1.5 mm2 32 x 0.20 1.4 mm 30 x 0.25 1.6 mm 2.5 mm2 4.0 mm2 35 x 0.30 2.2 mm 56 x 0.30 2.8 mm 6.0 mm2 10 mm2 19 x 0.64 3.4 mm 19 x 0.80 4.3 mm Current carrying capacity Current carrying capacity The current carrying capacity of a connector is shown by a derating curve. The curve shows the currents that the connector can carry continuously and simultaneously through all its contacts. The curve is determined by testing following the standard DIN EN 60512. The upper temperature is limited by the contact and insulation material used . The sum of the ambient temperature and the temperature created by the current flow may not exceed the upper temperature. This means that the current carrying capacity has no fixed value but decreases with increasing ambient temperatures. As a general example it can be said that a given connector which can carry 16A through all its contacts at 40C ambient temperature can carry less, e.g. 12A, at an ambient temperature of 80C. On the other hand it is often the case that not all contacts carry the whole rated current, which means that some single contacts may carry a higher current than that according to the derating curve. These currents have to be defined by testing. Upper temperature limited Ambient temperature (C) Chart 5: Current carrying capacity of copper wires in (A) Installation type Wire size (mm2) 0.25 0.34 0.5 0.75 1 1.5 2.5 4 6 10 - - - 7.6 10.4 13.5 18.3 25 32 44 - - - - 9.6 12 16.5 23 29 40 4.0 5.0 7.1 9.1 11.7 15.2 21 28 36 50 4.0 5.0 7.1 9.1 11.5 16.1 22 30 37 52 B1 Wires in conduits and installation channels B2 Cables and conductors in conduits or installation channels C Cables and conductors along walls E Cables and conductors on plank Description according to DIN EN 60204 for PVC insulated copper wires with a working temperature of +40C. For other requirements, 234 such as for other temperatures, mountings, or wires corresponding correction factors are used (see next page). Reduction Values Reduction values Chart 6 The values in chart 5 are based on an ambient temperature of 40 C. For other ambient temperatures the values have to be adjusted using the correction values of chart 6 below. Ambient temperature (C) Correction value 30 1.15 35 1.03 40 1.00 45 0.91 50 0.82 55 0.71 60 0.58 For installations with many cables and conductors under load the current carrying capacity is reduced according to the two following charts 7 and 8. Technical Information Technical Data Chart 7: Reduction values for accumulated conductors Installation type Number of cables and conductors / pairs under load 2 4 6 9 B1 and B2 0.80 0.85 0.87 0.86 C 0.65 0.75 0.78 0.76 E-one row 0.57 0.72 0.75 0.72 E-multi row 0.50 0.70 0.73 0.88 DC conductor (pair), independent of installation type 1.0 0.76 0.64 0.43 Three phase cable and conductor Chart 8: Reduction values for multicore cable and conductors up to 10mm2 Number of conductors (pairs) under load AC (conductor > 1 mm2) DC (Pairs 0,2 to 0,75 mm2) 5 0.75 0.52 7 0.65 0.45 10 0.55 0.39 24 0.40 0.27 Conductors of control circuits generally do not need a reduction. Impulse current carrying capacity A surge can happen to a connector and its contacts by an impulse current, e.g. through a short circuit in the system or by switching operations. The short-timed high current heat cannot be transferred outside fast enough so the contacts are stressed by the high temperature which in the worst case can lead to a local weld. The robust design of our connectors prevents most damage by impulse currents. Voltage grading of connectors General Clearances and creepage distances are the base for voltage grading of connectors. Valuation and dimensioning of clearances and creepage distances have changed since the introduction of insulation coordination. Insulation coordination comprises the selection of the electrical insulation performances of the equipment, taking into account the expected use and its environment. The following standards apply for this: IEC 60664-1/10.92 Insulation coordination for equipment within low-voltage systems DIN VDE 0110-1/4.97 Isolationskoordination fur elektrische Betriebsmittel in Niederspannungsanlagen 235 Technical Data Voltage Grading of Connectors Clearances The clearance is the shortest distance in air between two conductive parts. An important point for the dimensioning of clearances is the determination of the overvoltage category. The above standard specifies the possible overvoltages into the four following categories: Overvoltage category I Equipment intended for the use in appliances or parts of installations in which no overvoltage can occur. Examples are low-voltage equipment. Overvoltage category II Equipment intended for the use in installations or parts of it in which lightning overvoltages do not need to be considered, but switching overvoltages generated by the equipment do need to be considered. Examples are household appliances. Overvoltage category III Equipment intended for the use in installations or parts of it in which lightning overvoltages do not need to be considered, however switching overvoltages generated by the equipment, and for cases where the reliability and the availability of the equipment or its dependent circuits are subject to special requirements. Examples are protecting means, switches and sockets. Overvoltage category IV Equipment intended for the use in installations or parts of it in which lightning overvoltage has to be considered. Examples are electricity meters, overcurrent protection switches. Once the overvoltage category has been defined the rated impulse withstand voltage can be selected for the equipment based on the nominal voltage of the supply system and the overvoltage category using chart 9 below: Chart 9 Nominal voltage of the supply system in V (based on IEC 60038) Rated impulse voltage in kV for overvoltage category Three phase systems IV III II I 230/400 277/480 6 4 2,5 1,5 400/690 8 6 4 2,5 1000 12 8 6 4 After the rated impulse withstand voltage has been selected the pollution degree must be defined taking the expected pollution around the equipment into account. The following four degrees of pollution are established: After the rated impulse withstand voltage has been selected the pollution degree must be defined taking the expected pollution around the equipment into account. The following four degrees of pollution are established: Pollution degree 1 No pollution or only dry, non-conductive pollution occurs. The pollution has no influence. Pollution degree 2 Only non-conductive pollution occurs except occasionally a temporary conductivity caused by condensation is to be expected. Pollution degree 3 Conductive pollution occurs or dry non-conductive pollution occurs which becomes conductive due to condensation which is to be expected. 236 Pollution degree 4 The pollution generates persistent conductivity caused by conductive dust or by rain or snow. It has to be noted that for a connector or plug and socket devise with a degree of protection of min. IP 54 the parts inside the enclosure may be dimensioned for a lower pollution degree. This also applies to mated connectors which enclosure is ensured through the connector housing and which may only be disengaged for test and maintenance purposes. When impulse withstand voltage and the pollution degree are defined the minimum clearances can be selected from chart 10. Technical Information Technical Data Voltage Grading of Connectors (cont.) Chart 10 Impulse withstand voltage in kV Minimum clearances in air in mm up to 2000 m above sea level Case A (non homogeneous field) Case B (homogeneous field) Pollution degree Pollution degree 1 2 3 4 1 2 3 4 0.33 0.01 0.2 0.8 1.6 0.01 0.2 0.8 1.6 0.40 0.02 0.02 0.50 0.04 0.04 0.60 0.06 0.06 0.80 0.10 0.1 1.0 0.15 0.15 1.2 0.25 0.25 0.2 1.5 0.5 0.5 0.3 0.3 2.0 1.0 1.0 1.0 0.45 0.45 2.5 1.5 1.5 1.5 0.6 0.6 3.0 2 2 2 2 0.8 0.8 4.0 3 3 3 3 1.2 1,2 1.2 5.0 4 4 4 4 1.5 1.5 1.5 6.0 5.5 5.5 5.5 5.5 2 2 2 2 8.0 8 8 8 8 3 3 3 3 10 11 11 11 11 3.5 3.5 3.5 3.5 12 14 14 14 14 4.5 4.5 4.5 4.5 15 18 18 18 18 5.5 5.5 5.5 5.5 20 25 25 25 25 8 8 8 8 25 33 33 33 33 10 10 10 10 30 40 40 40 40 12.5 12.5 12.5 12,5 40 60 60 60 60 17 17 17 17 50 75 75 75 75 22 22 22 22 60 90 90 90 90 27 27 27 27 80 130 130 130 130 35 35 35 35 100 170 170 170 170 45 45 45 45 When defining the minimum clearances for connectors generally the values of the inhomogeneous field can be chosen or the required clearance has to be defined by a voltage test. Creepage distances The creepage distance is the shortest distance along the surface of the insulating material between two conductive parts. For the dimensioning of the creepage distance the following factors are taken into account: the rated voltage, the pollution degree and the tracking formation of the insulating material. The materials are separated into four groups according to their CTI values (Comparative Tracking Index): Material group I 600 CTI Material group II 400 CTI < 600 Material group IIIa 175 CTI < 400 Material group IIIb 100 CTI < 175 The minimum creepage distances can be selected from chart 11 . 237 Technical Data Creepage Distance Chart 11 U-eff Rated voltage U in V 10 Min. creepage distance in mm Printed circuits Other devices Pollution degree Pollution degree 1 1 2 2) 3) 2) 0.025 0.04 0.08 Pollution degree 2 3 Material group I II 0.4 Pollution degree IIIa 0.4 4 Material group IIIb I II IIIa 0.4 1 1 Material group IIIb I II IIIa 1 1.6 1.6 1.6 12.5 0.025 0.04 0.09 0.42 0.42 0.42 1.05 1.05 1.05 1.6 1.6 1.6 16 0.025 0.04 0.1 0.45 0.45 0.45 1.1 1.1 1,1 1.6 1.6 1.6 20 0,025 0.04 0.11 0.48 0.48 0.48 1.2 1.2 1.2 1.6 1.6 1,6 25 0,025 0.04 0.125 0.5 0.5 0.5 1.25 1.25 1.25 1.7 1.7 1.7 32 0.025 0.04 0.14 0.53 0.53 0.53 1.3 1.3 1.3 1.8 1.8 1.8 40 0.025 0.04 0.16 0.56 0.8 1.1 1.4 1.6 1.8 1.9 2.4 3 50 0.025 0.04 0.18 0.6 0.85 1.2 1.5 1.7 1.9 2 2.5 3.2 63 0.04 0.063 0.2 0.63 0.9 1.25 1,6 1.8 2 2.1 2.6 3.4 80 0.063 0.1 0.22 0.67 0.95 1.3 1.7 1.9 2.1 2.2 2.8 3.6 100 0.1 0.16 0.25 0.71 1 1.4 1.8 2 2.2 2.4 3.0 3.8 125 0.16 0.25 0.28 0.75 1.05 1.5 1.9 2.1 2.4 2.5 3.2 4 160 0.25 0.4 0.32 0.8 1.1 1.6 2 2.2 2.5 3.2 4 5 200 0.4 0.63 0.42 1 1.4 2 2.5 2.8 3.2 4 5 6.3 250 0.56 1 0.56 1.25 1.8 2.5 3.2 3.6 4 5 6.3 8 320 0.75 1.6 0.75 1.6 2.2 3.2 4 4.5 5 6.3 8 10 400 1 2 1 2 2.8 4 5 5.6 6.3 8 10 12.5 500 1.3 2.5 1.3 2.5 3.6 5 6.3 7.1 8.0 10 12.5 16 630 1.8 3.2 1.8 3.2 4.5 6.3 8 9 10 12.5 16 20 800 2.4 4 2.4 4 5.6 8 10 11 12.5 16 20 25 1000 3.2 5 3.2 5 7.1 10 12.5 14 16 20 25 32 1250 4.2 6.3 9 12.5 16 18 20 25 32 40 1600 5.6 8 11 16 20 22 25 32 40 50 2000 7.5 10 14 20 25 28 32 40 50 63 2500 10 12.5 18 25 32 36 40 50 63 80 3200 12.5 16 22 32 40 45 50 63 80 100 4000 16 20 28 40 50 56 63 80 100 125 5000 20 25 36 50 63 71 80 100 125 160 6300 25 32 45 63 80 90 100 125 160 200 8000 32 40 56 80 100 110 125 160 200 250 10000 40 50 71 100 125 140 160 200 250 320 IIIb Connectors in this catalogue are allocated to fixed rated voltages which apply to the machine building industry. In case of other applications the above chart can be used to determine other rated voltages. 238 Appendix American Wire Gauge (AWG) Connector life System of numerical designations for wire sizes, based on specified ranges of cross-sectional areas. Starts with 4/0 (000) at the largest size, going to 3/0, 2/0, 1/0, 1, 2, and up to 40 and beyond for the smallest size. A step of one AWG number corresponds to a reduction of cross-sectional area of appr. 20 %. The number of mating cycles prior to abrasion of the conductive contact surface and which does not result in a significant rise of the contact resistance. Tests according to test 9a of ICE 60512-5 / DIN EN 60512 Part 5. Attenuation The conductive element in a connector which mates with a corresponding element to provide an electrical path. A reduction of power. Occurs naturally when waves travel through lines, wave guides, or media such as air or water. Is produced additionally by imperfections in electrical or optical connections (attenuation in fibre optics), e. g. contact resistance, mismatch, etc. Bulkhead connector Connector designed to be inserted into a panel cutout from the rear of the panel, thus forming part of the barrier between two spaces. Back-mounted. Clearance The shortest distance in air between two conductive parts, see IEC 60664. Climatic stability General term describing the behavior of components under various climatic conditions, e. g. high and low temperatures, tropical climate, high humidity, moist heat, fungus, atmospheric conditions (industial atmosphere), reduced air pressure, etc. Climatic conditions for test purposes are explained in IEC 60068, DIN 46 040. Connector A component which terminates conductors for the purpose of providing connection and disconnection to a suitable mating component which shall not be engaged or disengaged when live. Depending on the fastening to a cabinet, panel, rack etc. or a cable, they are classified as fixed or free connectors. A connector comprises one or more contacts and a housing which may have a separate connector insert and a separate outer housing or shell. Connector housing The part of a connector into which the insert and the contacts are assembled. It may function as part of the locking mechanism. Connector insert An insulating element designed to support and position contacts in a connector housing. In connectors electromagnetic interference is prevented by shielding. Shielded connectors normally provide means to connect the screens of attached cables. Appendix Glossary of Terms Contact Contact resistance The electrical resistance of a mated set of contacts under specified conditions. Tested according to tests 2a, 2b, 2c, of IEC 60 512 -2/ DIN EN 60 512-2. Contact size The designation used to differentiate one contact from another. It may be denoted by one of the following numbering systems: Creepage distance The shortest distance along the surface of the insulating material between two conductive parts. The longer the distance, the less the risk of arc damage or tracking. Minimum creepage distances are specified according to the rated voltage and the applicable pollution degree and Comperative Tracking Index. Crimped connection A solderless connection made by crimping. IEC 60352-2 / DIN IEC 60352 Part 2. Derating curve The method for determining derating is specified in IEC 60 512-3. Here the combination of ambient temperature (Tu) and the current (J) leading to the same maximum allowable temperature (Tb) at the hottest point of the connector are plotted. DIN Deutsches Institut fur Normung. A German standards organization. Electromagnetic interference (EMI) General term describing the undesirable effects of the immission or emission of radio frequency fields. Funnel entry (restricted entry C146 D series) Flared or widened entrance to a conductor barrel permitting easier insertion of the conductor. Insertion or withdrawal force The force required to fully insert or withdraw a set of mated connectors without the effect of coupling, locking or similar devices. The insertion force is usually greater than the withdrawal force. 239 Appendix Connector Glossary Insulation grip Shield, shielding The area of a crimp contact that has been reshaped around the insulation of the conductor by compression during the crimping operation. Shielding of internal or external electric fields by means of a plane with a uniform electric potential, formed by metal shells or metallic layers on the inside or outside of plastic shells. The shield is normally connected to the shielding braid of the cable and/or chassis ground. Insulation resistance The resistance of the insulation between two conductive elements, in particular, the resistance between two contacts or between a contact and a metallic housing or shield. Tested according to test 3a of IEC 60512-2 / DIN IEC 60512 Part 2. Intermateable Two connectors are intermateable when they are capable of being connected electrically and mechanically but without regard to their performance and intermountability. Locator In a crimping tool the device used for positioning a crimp contact or terminal end. Locking lever A mechanical locking device operated by actuating a lever, designed to hold two mated connectors together. Typically the lever can only be fully locked if the two connectors are correctly mated. Mating cycle One mating cycle comprises one insertion and one withdrawal operation. Term used in the definition of connector life. Material group Classification of insulation materials according to their CTI values (CTI = Comperative Tracking Index) Overvoltage category A numeral defining a transient overvoltage condition. Overvoltage categories I, II, III and IV are used. Connector with braking capacity (CBC) A component which may be engaged or disengaged in normal use, when live or under load. Note: In the sense of this document the term - live- is used if contacts are under voltage not necessarily with a current flowing across the contacts. The term - load - is used if a current is flowing across the contacts. Rated current A current value assigned by the manufacturer which the connector or PSD can carry continuously (without interruption) and simultaneously through all its contacts wired with the largest conductor preferrably at an ambient temperature of 40 C without the upper temperature being exceeded. 240 Terminal block An assembly of terminals in a housing or body of insulating material to facilitate interconnection between multiple conductors. Also called terminal strip or barrier blocks if the terminals are separated by an insulation barrier. Wire range The range of wire cross sections which is compatible with the dimensions the terminals of the contact (wire barrel). The wire range is expressed in mm2 or in AWG numbers. Appendix 108039110 108039112 33,41,75 25,51,83, 91,115 108039114 61,123,131, 171 108039116 69,107,139, 155 108039118 101,147 108039120 163 108039122 174 CA401259 61,101,107, 171 CA401659 25,33,41,51, 83,91,107,139, 147,163,171,174 CA402059 41,75,115, 123,131,155 HP10ACS 210,214 HP25BCS 183,210 HP35CCS 187,210 HP50CCS 187,210 HP50DCS 191,210 HP70DCS 191,210 HP95DCS 191,210 HPAHS 179,210 HPASS 210 HPBHS 183,210 HPBSS 183,210 HPCHS 187,210 HPCSS 187,210 HPDHS 191,210 HPDSS 191,210 HS10ACS 210,214 HS25BCS 183,210 HS25CCS 187,210 HS25DCS 191,210 HS35CCS 187,210 HS35DCS 191,210 HS50CCS 187,210 HS50DCS 191,210 HS70DCS 191,210 HS95DCS 191,210 HSAHS 210 HSASS 210 HSBHS 210 HSBSS 210 HSCHS 210 HSCSS 210 HSDHS 210 HSDSS 210 MFX-3954 27,34,45,53 85,93,109,125, 141,149,165,177,212 MFX-3957 27,34,45,53 77,85,93,109, 117,125,133,141, 149,157,165,173, 177,212 MFX-3958 45,77,117, 133,157,173,212 MFX-3959 26,35,43 52,76,84,92,108, 116,124,132,140, 148,156,164,172,176,212 MFX-3960 26,35,43,52, 76,84,92,108, 116,124,132,140, 148,156,164,172, 176,212 MFX-3962 53,60,100, 109,212 MP10A23S 68,207 MP10B12E05F 205 MP10B12E05G5 205 MP10B12E05G10 205 MP10B12E05G15 205 MP10B12E05G30 205 MP10B12E08F 205 MP10B12E08G5 205 MP10B12E08G10 205 MP10B12E08G15 205 MP10B12E08G30 205 MP14M23F 26,34,42, 52,84,92, 108,124,140, 148,164,176,207 MP14M23G5 26,34,42 52,84,92, 108,124,140, 148,164,176,207 MP14M23G10 26,34,42, 52,84,92, 108,124,140, 148,164,176,207 MP14M23G15 26,34,42, 52,84,92, 108,124,140, 148,164,176,207 MP14M23G30 26,34,42, 52,84,92, 108,124,140, 148,164,176,207 MP16M12E06F 204 MP16M12E06G5 204 MP16M12E06G10 204 MP16M12E06G15 204 MP16M12E06G30 204 MP16M12E09F 204 MP16M12E09G5 205 MP16M12E09G10 205 MP16M12E09G15 205 MP16M12E09G30 205 MP16M23F 26,34,42, 52,84,92, 108,124,140, 148,164,176,207 MP16M23G5 26,34,42, 52,84,92, 108,124,140, 148,164,176,207 MP16M23G10 26,34,42, 52,84,92, 108,124,140, 148,164,176,207 MP16M23G15 26,34,42, 52,84,92, 108,124,140, 148,164,176,207 MP16M23G30 26,34,42, 52,84,92, 108,124,140, 148,164,176,207 MP24M23F 26,34,42,52, 84,92,108,124, 140,148,164,176,208 MP24M23G5 26,34,42,52, 84,92,108, 124,140,148, 164,176,208 MP24M23G1026,34,42,52, 84,92,108, 124,140,148, 164,176,208 MP24M23G1526,34,42,52, 84,92,108, 124,140,148, 164,176,208 MP24M23G3026,34,42,52, 84,92,108, 124,140,148, 164,176,208 MP24W23F 43,76,116,132, 156,172,208 MP24W23G5 43,76,116, 132,156,172,208 MP24W23G10 43,76,116, 132,156,172,208 MP24W23G15 43,76,116, 132,156,172,208 MP24W23G30 43,76,116, 132,156,172,208 MP28W23F 43,76,116, 132,156,172,208 MP28W23G5 43,76,116, 132,156,172,208 MP28W23G10 43,76,116, 132,156,172,208 MP28W23G15 43,76,116, 132,156,172,208 MP28W23G30 43,76,116, 132,156,172,208 MS6ARS8S 210 MS10A23S 68,207 MS10B12E05F 205 MS10B12E05G5 205 MS10B12E05G10 205 MS10B12E05G15 205 MS10B12E05G30 205 MS10B12E08F 205 MS10B12E08G5 205 MS10B12E08G10 205 MS10B12E08G15 205 MS10B12E08G30 205 MS14M23F 26,34,42, 52,84,92, 108,124,140, 148,164,176,207 MS14M23G5 26,34,42, 52,84,92, 108,124,140, 148,164,176,207 MS14M23G10 26,34,42, 52,84,92, 108,124,140, 148,164,176,207 MS14M23G15 26,34,42, 52,84,92, 108,124,140, 148,164,176,207 MS14M23G30 26,34,42, 52,84,92, 108,124,140, 148,164,176,207 MS16M12E06F 204 MS16M12E06G5 204 MS16M12E06G10 204 MS16M12E06G15 204 MS16M12E06G30 204 MS16M12E09F 204 MS16M12E09G5 205 MS16M12E09G10 205 MS16M12E09G15 205 MS16M12E09G30 205 MS16M23F 26,34,42, 52,84,92, 108,124,140, 148,164,176,207 Appendix Part Number Index (1-MS) 241 Appendix Part Number Index (MS -RT0W ) MS16M23G5 26,34,42, 52,84,92, 108,124,140, 148,164,176,207 MS16M23G10 26,34,42, 52,84,92, 108,124,140, 148,164,176,207 MS16M23G15 26,34,42, 52,84,92, 108,124,140, 148,164,176,207 MS16M23G30 26,34,42, 52,84,92, 108,124,140, 148,164,176,207 MS20M23F 26,34,42, 52,84,92, 108,124,140, 148,164,176,207 MS20M23G5 26,34,42, 52,84,92, 108,124,140, 148,164,176,207 MS20M23G10 26,34,42, 52,84,92, 108,124,140, 148,164,176,207 MS20M23G15 26,34,42, 52,84,92, 108,124,140, 148,164,176,207 MS20M23G30 26,34,42, 52,84,92, 108,124,140, 148,164,176,207 MS20W12E06F 204 MS20W12E06G5 204 MS20W12E06G10 204 MS20W12E06G15 204 MS20W12E06G30 204 MS20W12E09F 204 MS20W12E09G5 204 MS20W12E09G10 204 MS20W12E09G15 204 MS20W12E09G30 204 MS20W23F 43,76,116, 132,156,172,208 MS20W23G5 43,76,116, 132,156,172,208 MS20W23G10 43,76,116, 132,156,172,208 MS20W23G15 43,76,116, 132,156,172,208 242 MS20W23G30 43,76,116, 132,156,172,208 MS24M23F 26,34,42,52, 84,92,108, 124,140,148, 164,176,208 MS24M23G5 26,34,42,52, 84,92,108, 124,140,148, 164,176,208 MS24M23G10 26,34,42, 52,84,92, 108,124,140,148, 164,176,208 MS24M23G15 26,34,42, 52,84,92, 108,124,140,148, 164,176,208 MS24M23G30 26,34,42, 52,84,92, 108,124,140,148, 164,176,208 MS24W23F 43,76,116, 132,156,172,208 MS24W23G5 43,76,116, 132,156,172,208 MS24W23G10 43,76,116, 132,156,172,208 MS24W23G15 43,76,116, 132,156,172,208 MS24W23G30 43,76,116, 132,156,172,208 MS28W23F 43,76,116, 132,156,172,208 MS28W23G5 43,76,116, 132,156,172,208 MS28W23G10 43,76,116, 132,156,172,208 MS28W23G15 43,76,116, 132,156,172,208 MS28W23G30 43,76,116, 132,156,172,208 QXRT08 68 QXRT08R 68 QXRT12S 52,53,60, 100,109 QXRT16 26,27,34,35, 43,45,53,84,85,92, 93,108,109,124,125, 140,141,148,149,164, 165,176,177 QXRT20 43,45,76,77, 116,117,132,133, 156,157,172,173 RB00011910 RB00011912 RB00011914 33,41,75 25,83,115 51,61,91, 123,131 RB00011916 69,107, 139,155 RB00011918 101,147,171 RB00011920 163 RT0B12CGNS1 21,79,111 RT0B12CGNS2 21,79,111 RT0B14CGNS1 47,55, 87,119,127 RT0B14CGNS2 47,55, 87,119,127 63,103, RT0B16CGNS1 135,151 RT0B16CGNS2 63,103, 135,151 RT0L10CGNS1 29,37,71 RT0L10CGNS2 29,37,71 RT0L12CGNS1 21,79,111 RT0L12CGNS2 21,79,111 RT0L14CGNS1 47,55,87, 119,127 RT0L14CGNS2 47,55,87, 119,127 RT0L16CGNS1 63,103, 135,151 RT0L16CGNS2 63,103, 135,151 RT0L18CGNS1 95,143,167 RT0L18CGNS2 95,143,167 RT0L20CPGS5 159 RT0L20CPGS6 159 RT0S10CGNS1 29,37,71 RT0S10CGNS2 29,37,71 RT0S12CGNS1 21,79,111 RT0S12CGNS2 21,79,111 RT0S14CGNS1 47,55,87, 119,127 RT0S14CGNS2 47,55,87, 119,127 RT0S16CGNS1 63,103, 135,151 RT0S16CGNS2 63,103, 135,151 RT0S18CGNS1 95,143,167 RT0S18CGNS2 95,143,167 RT0W0106PNH 71 RT0W0106PNHEC 71 RT0W0106PNHK 71 RT0W0106SNH 71 RT0W0106SNHEC 71 RT0W0106SNHK 71 RT0W01210PNH RT0W01210PNHEC RT0W01210PNHK RT0W01210SNH RT0W01210SNHEC RT0W01210SNHK RT0W01419PNH RT0W01419PNHEC RT0W01419PNHK RT0W01419SNH RT0W01419SNHEC RT0W01419SNHK RT0W01626PNH RT0W01626PNHEC RT0W01626PNHK RT0W01626SNH RT0W01626SNHEC RT0W01626SNHK RT0W01832PNH RT0W01832PNHEC RT0W01832PNHK RT0W01832SNH RT0W01832SNHEC RT0W01832SNHK RT0W6106PNH RT0W6106PNHEC RT0W6106PNHK RT0W6106SNH RT0W6106SNHEC RT0W6106SNHK RT0W7106PNH RT0W7106PNHEC RT0W7106PNHK RT0W7106SNH RT0W7106SNHEC RT0W7106SNHK RT0W61210PNH RT0W61210PNHEC RT0W61210PNHK RT0W61210SNH RT0W61210SNHEC RT0W61210SNHK RT0W61419PNH RT0W61419PNHEC RT0W61419PNHK RT0W61419SNH RT0W61419SNHEC RT0W61419SNHK RT0W61626PNH RT0W61626PNHEC RT0W61626PNHK RT0W61626SNH RT0W61626SNHEC RT0W61626SNHK 111 111 111 111 111 111 127 127 127 127 127 127 151 151 151 151 151 151 167 167 167 167 167 167 71 71 71 71 71 71 71 71 71 71 71 71 111 111 111 111 111 111 127 127 127 127 127 127 151 151 151 151 151 151 Appendix RT0W61832PNH 167 RT0W61832PNHEC 167 RT0W61832PNHK 167 RT0W61832SNH 167 RT0W61832SNHEC 167 RT0W61832SNHK 167 RT0W71210PNH 111 RT0W71210PNHEC 111 RT0W71210PNHK 111 RT0W71210SNH 111 RT0W71210SNHEC 111 RT0W71210SNHK 111 RT0W71419PNH 127 RT0W71419PNHEC 127 127 RT0W71419PNHK RT0W71419SNH 127 RT0W71419SNHEC 127 RT0W71419SNHK 127 RT0W71626PNH 151 RT0W71626PNHEC 151 RT0W71626PNHK 151 RT0W71626SNH 151 RT0W71626SNHEC 151 RT0W71626SNHK 151 RT0W71832PNH 167 RT0W71832PNHEC 167 RT0W71832PNHK 167 RT0W71832SNH 167 RT0W71832SNHEC 167 RT0W71832SNHK 167 RT010DC 33,41,75 RT010DCG 33,41,75 RT010RL 33,41,75 RT012DC 25,83,115 RT012DCG 25,83,115 RT012RL 25,83,115 RT014DC 51,61,91, 123,131 RT014DCG 51,61,91, 123,131 RT014RL 51,61,91, 123,131 RT016DC 69,107, 139,155 RT016DCG 69,107, 139,155 RT016RL 69,107,139155 RT018DC 101,147,171 RT018DCG 101,147,171 RT018RL 101,147,171 RT020DC 163 RT020DCG 163 RT020RL 163 RT00102PNH 37 RT00102PNHEC RT00102PNHEC RT00102PNHK RT00102SNH RT00102SNHEC RT00102SNHEC RT00102SNHK RT00104PNH RT00104PNHEC RT00104PNHK RT00104SNH RT00104SNHEC RT00104SNHK RT00123PNH RT00123PNHEC RT00123PNHK RT00123SNH RT00123SNHEC RT00123SNHK RT00128PNH RT00128PNHEC RT00128PNHK RT00128SNH RT00128SNHEC RT00128SNHK RT00142PNH RT00142PNHEC RT00142SNH RT00142SNHEC RT00144PNH RT00144PNHEC RT00144SNH RT00144SNHEC RT00148PNH RT00148PNHEC RT00148SNH RT00148SNHEC RT00164PNH RT00164PNHEC RT00164SNH RT00164SNHEC RT00169PNH RT00169PNHEC RT00169SNH RT00169SNHEC RT00188PNH RT00188PNHEC RT00188SNH RT00188SNHEC RT610DC RT610DC RT610DC RT610DCG RT610DCG 37 37 37 37 37 37 37 29 29 29 29 29 29 21 21 21 21 21 21 79 79 79 79 79 79 47 47 47 47 55 55 55 55 87 87 87 87 63 63 63 63 103 103 103 103 95 95 95 95 33 41 75 33 41 RT610DCG RT612DC RT612DC RT612DC RT612DCG RT612DCG RT612DCG RT614DC RT614DC RT614DC RT614DC RT614DC RT614DCG RT614DCG RT614DCG RT614DCG RT614DCG RT616DC RT616DC RT616DC RT616DC RT616DCG RT616DCG RT616DCG RT616DCG RT618DC RT618DC RT618DC RT618DCG RT618DCG RT618DCG RT620DC RT620DCG RT001412PNH RT001412PNHEC RT001412PNHK RT001412SNH RT001412SNHEC RT001412SNHK RT001619PNH RT001619PNHEC RT001619PNHK RT001619SNH RT001619SNHEC RT001619SNHK RT001823PNH RT001823PNHEC RT001823PNHK RT001823SNH RT001823SNHEC RT001823SNHK RT002028PNH RT002028PNHEC RT002028PNHK 75 25 83 115 25 83 115 51 61 91 123 131 51 61 91 123 131 69 107 139 155 69 107 139 155 101 147 171 101 147 171 163 163 119 119 119 119 119 119 135 135 135 135 135 135 143 143 143 143 143 143 159 159 159 RT002028SNH RT002028SNHEC RT002028SNHK RT002448PNH RT002448SNH RT06102PNH RT06102PNHEC RT06102SNH RT06102SNHEC RT06104PNH RT06104PNHEC RT06104PNHK RT06104SNH RT06104SNHEC RT06104SNHK RT06123PNH RT06123PNHEC RT06123PNHK RT06123SNH RT06123SNHEC RT06123SNHK RT06128PNH RT06128PNHEC RT06128PNHK RT06128SNH RT06128SNHEC RT06128SNHK RT06142PNH RT06142PNHEC RT06142SNH RT06142SNHEC RT06144PNH RT06144PNHEC RT06144SNH RT06144SNHEC RT06148PNH RT06148PNHEC RT06148SNH RT06148SNHEC RT06164PNH RT06164PNHEC RT06164SNH RT06164SNHEC RT06188PNH RT06188PNHEC RT06188SNH RT06188SNHEC RT07102PNH RT07102PNHEC RT07102SNH RT07102SNHEC RT07104PNH RT07104PNHEC RT07104PNHK 159 159 159 174 174 37 37 37 37 29 29 29 29 29 29 21 21 21 21 21 21 79 79 79 79 79 79 47 47 47 47 55 55 55 55 87 87 87 87 63 63 63 63 95 95 95 95 37 37 37 37 29 29 29 Appendix Part Number Index (RT0W -RT0) 243 Appendix Part Number Index (RT0-SP) RT07104SNH RT07104SNHEC RT07104SNHK RT07123PNH RT07123PNHEC RT07123PNHK RT07123SNH RT07123SNHEC RT07123SNHK RT07128PNH RT07128PNHEC RT07128PNHK RT07128SNH RT07128SNHEC RT07128SNHK RT07142PNH RT07142PNHEC RT07142SNH RT07142SNHEC RT07144PNH RT07144PNHEC RT07144SNH RT07144SNHEC RT07148PNH RT07148PNHEC RT07148SNH RT07148SNHEC RT07164PNH RT07164PNHEC RT07164SNH RT07164SNHEC RT07169PNHEC RT07169SNHEC RT07188PNH RT07188PNHEC RT07188SNH RT07188SNHEC RT061412PNH RT061412PNHEC RT061412PNHK RT061412SNH RT061412SNHEC RT061412SNHK RT061609PNH RT061609PNHEC RT061609SNH RT061609SNHEC RT061619PNH RT061619PNHEC RT061619PNHK RT061619SNH RT061619SNHEC RT061619SNHK RT061823PNH 244 29 29 29 21 21 21 21 21 21 79 79 79 79 79 79 47 47 47 47 55 55 55 55 87 87 87 87 63 63 63 63 103 103 95 95 95 95 119 119 119 119 119 119 103 103 103 103 135 135 135 135 135 135 143 RT061823PNHEC 143 RT061823PNHK 143 RT061823SNH 143 RT061823SNHEC 143 RT061823SNHK 143 RT062028PNH 159 RT062028PNHEC 159 RT062028PNHK 159 RT062028SNH 159 RT062028SNHEC 159 RT062028SNHK 159 RT062448PNH 174 RT062448SNH 174 RT071412PNH 119 RT071412PNHEC 119 RT071412PNHK 119 RT071412SNH 119 RT071412SNHEC 119 RT071412SNHK 119 RT071609PNH 103 RT071609SNH 103 RT071619PNH 135 RT071619PNHEC 135 RT071619PNHK 135 RT071619SNH 135 RT071619SNHEC 135 RT071619SNHK 135 RT071823PNH 143 RT071823PNHEC 143 RT071823PNHK 143 RT071823SNH 143 RT071823SNHEC 143 RT071823SNHK 143 RT072028PNH 159 RT072028PNHEC 159 RT072028PNHK 159 RT072028SNH 159 RT072028SNHEC 159 RT072028SNHK 159 RTFD10B 33,41,75 RTFD12B 25,83,91,115 RTFD14B 51,61,123,131 RTFD16B 69,107,139,155 RTFD18B 101,147,171 RTFD20B 163 RTFD24B 174 RTHP0121PN-16C 179 RTHP0121PN-H1 179 RTHP0141PN-25C 183 RTHP0141PN-H1 183 RTHP0141PN-M1 183 RTHP0161PN-35C 187 RTHP0161PN-50C 187 RTHP0161PN-H1 187 RTHP0161PN-M1 187 RTHP0201PNH-50C 191 RTHP0201PNH-70C 191 RTHP0201PNH-95C 191 RTHP0201PNH-H1 191 RTHP0201PNH-M1 191 RTHP0203PNH-16C 197 RTHP0203SNH-16C 197 RTHP6121SNH16-BS2 179 RTHP6121SNH-16S2 179 RTHP6141SNH25-BS2 183 RTHP6141SNH25-EC 183 RTHP6141SNH25-PS2 183 RTHP6141SNH-25S2 183 RTHP6161SNH25-PS3 187 RTHP6161SNH35-PS2 187 RTHP6161SNH-35S2 187 RTHP6161SNH50-PS2 187 RTHP6201SNH25-PS5 191 RTHP6201SNH35-PS2 191 RTHP6201SNH50-PS2 191 RTHP6201SNH70-PS1 191 RTHP6201SNH70-PS2 191 RTHP6201SNH95-PS2 191 RTHP6203PNH-16S2 197 RTHP6203SNH-16S2 197 SP12A1T 53,60, 100,109,202 SP14M1F 27,35,44,53, 85,93,109,125,141, 149,165,177,202 SP14M1G5 27,35,44,53, 85,93,109,125,141, 149,165,177,202 SP14M1G10 27,35,44,53, 85,93,109,125,141, 149,165,177,202 SP14M1G15 27,35,44,53, 85,93,109,125,141, 149,165,177,202 SP14M1G30 27,35,44,53, 85,93,109,125,141, 149,165,177,202 SP16M1F 27,35,44,53, 85,93,109,125,141, 149,165,177,202 SP16M1G5 27,35,44,53, 85,93,109,125,141, 149,165,177,202 SP16M1G10 27,35,44,53, 85,93,109,125,141, 149,165,177,202 SP16M1G15 27,35,44,53, 85,93,109,125,141, 149,165,177,202 SP16M1G30 27,35,44,53, 85,93,109,125,141, 149,165,177,202 SP20M1F 27,35,44,53, 85,93,109,125,141, 149,165,177,202 SP20M1G5 27,35,44,53, 85,93,109,125,141, 149,165,177,202 SP20M1G10 27,35,44,53, 85,93,109,125,141, 149,165,177,202 SP20M1G15 27,35,44,53, 85,93,109,125,141, 149,165,177,202 SP20M1G30 27,35,44,53, 85,93,109,125,141, 149,165,177,202 SP20W1F 45,77,117, 133,157,173,203 SP20W1G5 45,77,117, 133,157,173,203 SP20W1G10 45,77,117, 133,157,173,203 SP20W1G15 45,77,117, 133,157,173,203 SP20W1G30 45,77,117, 133,157,173,203 SP24M1F 27,35,44,53,85, 93,109,125,141, 149,165,177,202 SP24M1G5 27,35,44,53, 85,93,109,125, 141,149,165, 177,202 SP24M1G10 27,35,44,53, 85,93,109,125, 141,149,165, 177,203 SP24M1G15 27,35,44,53, 85,93,109,125, 141,149,165, 177,203 SP24M1G30 27,35,44,53, 85,93,109,125, 141,149,165, 177,203 SP24W1F 45,77,117, 133,157,173,203 SP24W1G5 45,77,117, 133,157,173,203 Appendix SP24W1G10 45,77,117, 133,157,173,203 SP24W1G15 45,77,117, 133,157,173,203 SP24W1G30 45,77,117, 133,157,173,203 SP28W1F 45,77,117, 133,157,173,203 SP28W1G5 45,77,117, 133,157,173,203 SP28W1G10 45,77,117, 133,157,173,203 SP28W1G15 45,77,117, 133,157,173,203 SP28W1G30 45,77,117, 133,157,173,203 SS12A1T 53,60,100, 109,202 SS14M1F 27,35,44,53, 85,93,109,125, 141,149,165, 177,202 SS14M1G5 27,35,44,53, 85,93,109,125, 141,149,165, 177,202 SS14M1G10 27,35,44,53, 85,93,109,125, 141,149,165, 177,202 SS14M1G15 27,35,44,53, 85,93,109,125, 141,149,165, 177,202 SS14M1G30 27,35,44,53, 85,93,109,125, 141,149,165, 177,202 SS16M1F 27,35,44,53, 85,93,109,125, 141,149,165, 177,202 SS16M1G5 27,35,44,53, 85,93,109,125, 141,149,165, 177,202 SS16M1G10 27,35,44,53, 85,93,109,125, 141,149,165, 177,202 SS16M1G15 27,35,44,53, 85,93,109,125, 141,149,165, 177,202 SS16M1G30 27,35,44,53, 85,93,109,125, 141,149,165, 177,202 SS20M1F 27,35,44,53, 85,93,109,125, 141,149,165, 177,202 SS20M1G5 27,35,44,53, 85,93,109,125, 141,149,165, 177,202 SS20M1G10 27,35,44,53, 85,93,109,125, 141,149,165, 177,202 SS20M1G15 27,35,44,53, 85,93,109,125, 141,149,165, 177,202 SS20M1G30 27,35,44,53, 85,93,109,125, 141,149,165, 177,202 SS20W1F 45,77,117, 133,157,173,203 SS20W1G5 45,77,117, 133,157,173,203 SS20W1G10 45,77,117, 133,157,173,203 SS20W1G15 45,77,117, 133,157,173,203 SS20W1G30 445,77,117, 133,157,173,203 SS24M1F 27,35,44,53, 85,93,109,125, 141,149,165, 177,202 SS24M1G5 27,35,44,53, 85,93,109,125, 141,149,165, 177,202 SS24M1G10 27,35,44,53, 85,93,109,125, 141,149,165, 177,203 SS24M1G15 27,35,44,53, 85,93,109,125, 141,149,165, 177,203 SS24M1G30 27,35,44,53, 85,93,109,125, 141,149,165, 177,203 SS24W1F 45,77,117, 133,157,173,203 SS24W1G5 45,77,117, 133,157,173,203 SS24W1G10 45,77,117, 133,157,173,203 SS24W1G30 45,77,117, 133,157,173,203 SS28W1F 45,77,117, 133,157,173,203 SS28W1G5 45,77,117, 133,157,173,203 SS28W1G10 45 SS28W1G10 45,77,117, 133,157,173,203 SS28W1G15 45,77,117, 133,157,173,203 SS28W1G30 45,77,117, 133,157,173,203 Appendix Part Number Index (SP-SS) 245 www.amphenol-sine.com USA Germany China USA United Kingdom India Australia Korea Amphenol Sine Systems 44724 Morley Drive Clinton Township, MI 48036 Toll-Free: 1-800-394-7732 Fax: 1-586-465-1216 Email: csr@amphenol-sine.com www.amphenol-sine.com Amphenol Corporation Corporate Headquarters 358 Hall Ave Wallingford Ct 06492 Phone: (877) 267-4366 www.amphenol.com Mexico Amphenol Tuchel GmbH August-Haeusser-Strasse 10 Heilbronn, Germany 74080 Phone: 49(0)-7131-929-0 Fax: 49(0)-7131-929-486 Email: info@amphenol.de www.amphenol.de Amphenol LIMITED Thanet Way, Whitstable Kent CT5 3JF, United Kingdom Phone: 44-1-227-773200 Fax: 44-1-227-276571 www.amphenol.co.uk Prolongacion Reforma 61-6 B2 Col. Paseo de las Lomas C.P. 01330 Mexico DF, Mexico Phone: 52-55-5258-9984 Fax: 52-55-5081-6890 Email: info@amphenolmexico.com www.amphenolmexico.com Amphenol AUSTRALIA PTY LIMITED 2 Fiveways Blvd., Keysborough Melbourne, Victoria 3173 Australia Phone: 613-8796-8888 Fax: 613-8796-8801 www. amphenol.com.au Argentina Amphenol International Ltd Turkey Sun Plaza Kat. 15 Maslak Mah. Bilim Sok. No. 5 34398 Sisli / Istanbul - Turkey Tel: + 90 212 367.92.20 Fax: + 90 212 367.92.21 www.amphenol.com.tr Amphenol ARGENTINA Avenida Callao 930 2nd floor Office B Plaza C1023AAP Buenos Aires, Argentina Phone: 54-11-4815-6886 Fax: 54-11-4814-5779 Email: info@amphenol.com.ar amphenol.com.ar Brazil Amphenol do Brasil Ltda Rua Diogo Moreira, 132 20 Andar, Rooms 2001-2-3 CEP 05423-101 Sao Paulo- SP, Brazil Phone: 55-11-3815-1003 Fax: 55-11-3815-1629 www.amphenol.com.br Turkey South Africa Amphenol International Ltd South Africa 30 Impala Road 2196 Sandton, Chislehurston South Africa Phone: 27-11-783-9517 Fax: 27-11-783-9519 Email: sales@amphenolafrica.com www.amphenol.com.za France Amphenol SOCAPEX 948, Promenade de l'Arve - BP 29 74311 Thyez CEDEX, France Phone: 33(0)4-50-89-28-40 Fax: 33(0)4-50-96-29-75 www.amphenol-socapex.com Catalog Number: CAT-ECOMATE-RM Pub 05/2018 Amphenol Sine Systems Building 21, 1st Liao Keng Industrial Zone, Shi Yan Street, Bao An District Shenzhen, China 518180 Tel: 86-755-8173-8000 ext. 8098 Fax: 86-755-8173-8180 www.amphenol-sine.com.cn Amphenol INTERCONNECT INDIA PVT LTD 105 Bhosari Industrial Area Pune 411 026, India Phone: +91 20 67360304 Fax: +91 20 67360321 www.amphenol-in.com Amphenol DAESHIN 558. Songnae-2 Dong. SoSa-Gu Bucheon City, Gyeonggi-do, Korea 422-818 Phone: 81-32-610-3800 Fax: 81-32-673-2507 Email: info@amphenol.co.kr www. amphenol.co.kr Japan Amphenol JAPAN 471-1, Deba, Ritto-city shiga 520-3041, Japan Phone: 81-77-553-8501 Fax: 81-77-551-2200 www.amphenol.co.jp Russia Amphenol RUSSIA 8 Yaroslavskaja Street 129164 Moscow, Russia Phone: 7495-937-6341 Fax: 7495-937-6319 www.amphenol.ru