IMC-1210 Vishay Dale Wirewound, Surface Mount Molded Inductors FEATURES STANDARD ELECTRICAL SPECIFICATIONS TEST FREQ. SRF DCR RATED DC (MHz) IND. Q MIN. MAX. CURRENT (H) TOL. L&Q MIN. (MHz) () (mA) (1) 0.010 20 % 50 30 1000 0.13 734 0.012 20 % 50 30 1000 0.14 707 0.015 20 % 50 30 1000 0.16 661 0.018 20 % 50 30 1000 0.18 624 0.022 20 % 50 30 1000 0.20 592 0.027 20 % 50 30 1000 0.22 564 0.033 20 % 50 30 1000 0.24 540 0.039 20 % 50 30 1000 0.27 530 0.047 20 % 50 30 1000 0.30 483 0.056 20 % 50 30 1000 0.33 470 0.068 20 % 50 30 1000 0.36 450 0.082 20 % 50 30 900 0.40 450 0.10 20 % 50 30 700 0.44 450 0.12 20 % 25.2 30 500 0.22 584 0.15 20 % 25.2 30 450 0.25 548 0.18 20 % 25.2 30 400 0.28 518 0.22 20 % 25.2 30 350 0.32 484 0.27 20 % 25.2 30 320 0.36 456 0.33 20 % 25.2 30 300 0.40 453 0.39 20 % 25.2 30 250 0.45 450 0.47 20 % 25.2 30 220 0.50 450 0.56 20 % 25.2 30 180 0.55 450 0.68 20 % 25.2 30 160 0.60 450 0.82 20 % 25.2 30 140 0.67 450 1.0 10 % 7.96 30 120 0.70 400 1.2 10 % 7.96 30 100 0.75 390 1.5 10 % 7.96 30 85 0.85 370 1.8 10 % 7.96 30 80 0.90 350 2.2 10 % 7.96 30 75 1.0 320 2.7 10 % 7.96 30 70 1.1 290 3.3 10 % 7.96 30 60 1.2 260 3.9 10 % 7.96 30 55 1.3 250 4.7 10 % 7.96 30 50 1.5 224 5.6 10 % 7.96 30 45 1.6 217 6.8 10 % 7.96 30 40 1.8 204 8.2 10 % 7.96 30 38 2.0 194 10 10 % 2.52 30 33 2.1 189 12 10 % 2.52 30 30 2.5 173 15 10 % 2.52 30 21 2.8 164 18 10 % 2.52 30 20 3.3 151 22 10 % 2.52 30 19 3.7 145 27 10 % 2.52 30 18 5.0 122 33 10 % 2.52 30 16 6.0 112 39 10 % 2.52 30 15 7.0 104 47 10 % 2.52 30 14 9.0 91 56 10 % 2.52 30 12 10.0 87 68 10 % 2.52 30 11 11.0 83 82 10 % 2.52 30 10 12.0 79 100 10 % 0.796 20 9 14.0 73 120 10 % 0.796 15 8 11.0 70 150 10 % 0.796 15 6.5 15.0 65 180 10 % 0.796 15 6 17.0 60 220 10 % 0.796 15 6 21.0 50 Note (1) Rated DC current based on the maximum temperature rise, not to exceed 40 C at + 85 C ambient * Printed marking * Molded construction provides superior strength and moisture resistance * Compatible with vapor phase and infrared reflow soldering * Tape and reel packaging for automatic handling, 2000/reel, EIA-481 * Compliant to RoHS Directive 2002/95/EC ELECTRICAL SPECIFICATIONS Inductance Range: 0.01 H to 220 H Inductance and Tolerance: 20 % for 0.01 H to 0.82 H, 10 % for 1.0 H to 220 H standard. Special tolerances available. Operating Temperature: - 55 C to + 125 C Coilform Material: Non-magnetic from 0.01 H to 0.10 H Powdered iron from 0.12 H to 100 H Ferrite from 120 H to 220 H TEST EQUIPMENT * HP4342A Q meter with Vishay Dale test fixture or equivalent * HP4191A RF impedance analyzer (for SRF measurements) * Wheatstone brigde DIMENSIONS in inches [millimeters] 0.087 0.008 [2.21 0.203] 0.030 [0.762] Typ. 0.006 [0.152] Ref. Typ. 0.040 [1.02] 0.126 0.008 [3.20 0.203] 0.098 0.008 [2.49 0.203] 0.028 0.004 [0.711 0.102] Typ. 0.073 [1.85] Ref. 0.118 [3.0] Guidelines for Parallel Component Printed Circuit Mounting Pads on IMC-1210-100 Chip Inductors 0.138 [3.5] 0.020 (1) [0.5] 0.118 [3.0] 0.039 [1.0] Note (1) Recommended spacing between components 0.070 [1.8] 0.039 [1.0] PART MARKING - Vishay Dale - Inductance value - Date code DESCRIPTION IMC-1210 MODEL 10 H INDUCTANCE VALUE 10 % INDUCTANCE TOLERANCE ER PACKAGE CODE e3 JEDEC LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER I M PRODUCT FAMILY Document Number: 34043 Revision: 15-Mar-11 C 1 2 1 SIZE 0 E R PACKAGE CODE For technical questions, contact: magnetics@vishay.com 1 0 INDUCTANCE VALUE 0 K TOL. www.vishay.com 1 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000