Design, Specifications are subject to change without notice. Ask factor y for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail.
Aluminum Electrolytic Capacitor/ED
– EE97 –
ED A
Series: Type :
High ripple current (at high frequency)
Endurance: 105 °C 8000,10000h
Including low profile products (20mm height)
Category temp. range
Rated W.V. Range
Nominal Cap. Range
■ Dimensions in mm (not to scale)
I < 0.06 CV + 10(µ A)
After 2 minutes application of rated working voltage at +20°C
■ Ripple current Frequency Coefficient
-25 to + 105°C
160 to 450 V .DC
10 to 330 µ F
±20 % (120Hz/+20°C)
Radial Lead Type
■ Features
■ Specifications
DC Leakage Current
Dissipation Factor
Capacitance Tolerance
Endurance
After following life test with DC voltage and +105±2°C ripple current value applied (The sum of
DC and ripple peak voltage shall not exceed the rated working voltage), for regulation times,
the capacitors shall meet the limits specified bellow. Post test requirements at +20°C.
Regulation times of life test: φ 10=8000h, φ 12.5 to φ18=10000h
Capacitance change
D.F.
DC leakage current
±20% of initial measured value
< 200 of initial specified value
< initial specified value
Shelf Life After storage for 1000 hours at +105±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance.(With voltage treatment)
Please see the attached standard products list
Japan
■ Main application
Electronic ballast, Power supply input circuit
Frequency (Hz)
Cap.(µF) 50 < f < 120 120 < f < 300 300 < f < 1k 1k < f < 10k 10k < f < 30k 30k < f <100k
Cap. < 100µF
100µF < Cap.
0.30 0.40 0.55 0.70 0.90 1.00
0.35 0.45 0.60 0.75 0.90 1.00
5.0 5.0 7.5 7.5
Body Dia. φD
Lead Dia. φd
Lead space P
10 12.5 16 18
0.6 0.6 0.8 0.8
L
L<16:L+1.5max
φd±0.05
14 min 3 min φD+0.5 max
P±0.5
L>20:L+2.0 max
Vent
P.V.C. Sleeve
Characteristics at low
temperature W.V.(V) 160 200 250 350 400 450
Z(-25°C)/Z(20°C) 3 3 3 6 6 6
Aluminum Electrolytic Capacitor/ED
Design, Specifications are subject to change without notice. Ask factor y for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail.
– EE98 –
(mm) (mm) (mm) (pcs) (pcs)
(µF) (mm) (mm)
(mA)(V)
160
200
350
When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch B=5mm, 7.5mm.
The taping dimentions are explained on p.45 of our Catalog. Please use it as a reference guide.
D.F.
(120Hz)
(+20°C)
Lead Space
■
Part No.
Specification
Dia. Length Taping
Case size
Cap.
(±20%) Lead
Dia.
Lead Length
W.V.
Straight Leads
Ripple
current
(100kHz)
(+105ûC) Taping
*B
Min. Packaging Q'ty
Straight
Standard Products
22 10 20 500 0.15 8000 0.6 5.0 5.0 EEUED2C220( ) 200 500
33 10 20 580 0.15 8000 0.6 5.0 5.0 EEUED2C330( ) 200 500
47 10 20 750 0.15 8000 0.6 5.0 5.0 EEUED2C470( ) 200 500
68 12.5 20 950 0.15 10000 0.6 5.0 5.0 EEUED2C680( ) 200 500
82 12.5 25 1060 0.15 10000 0.6 5.0 5.0 EEUED2C820( ) 200 500
100 12.5 25 1170 0.15 10000 0.6 5.0 5.0 EEUED2C101( ) 200 500
16 20 1280 0.15 10000 0.8 7.5 7.5 EEUED2C101S( ) 100 250
150 16 25 1400 0.15 10000 0.8 7.5 7.5 EEUED2C151 100 250
18 20 1400 0.15 10000 0.8 7.5 7.5 EEUED2C151S( ) 100 250
220 16 31.5 1700 0.15 10000 0.8 7.5 EEUED2C221 100
18 25 1500 0.15 10000 0.8 7.5 7.5 EEUED2C221S( ) 100 250
330 18 31.5 2000 0.15 10000 0.8 7.5 EEUED2C331 50
22 10 20 600 0.15 8000 0.6 5.0 5.0 EEUED2D220( ) 200 500
33 10 20 650 0.15 8000 0.6 5.0 5.0 EEUED2D330( ) 200 500
47 12.5 20 790 0.15 10000 0.6 5.0 5.0 EEUED2D470( ) 200 500
68 12.5 25 950 0.15 10000 0.6 5.0 5.0 EEUED2D680( ) 200 500
16 20 1000 0.15 10000 0.8 7.5 7.5 EEUED2D680S( ) 100 250
82 16 20 1100 0.15 10000 0.8 7.5 7.5 EEUED2D820S( ) 100 250
100 16 25 1300 0.15 10000 0.8 7.5 7.5 EEUED2D101( ) 100 250
18 20 1280 0.15 10000 0.8 7.5 7.5 EEUED2D101S 100 250
150 16 25 1400 0.15 10000 0.8 7.5 7.5 EEUED2D151( ) 100 250
220 18 31.5 2000 0.15 10000 0.8 7.5 EEUED2D221 100
330 18 40 2400 0.15 10000 0.8 7.5 EEUED2D331 50
22 10 20 560 0.15 8000 0.6 5.0 5.0 EEUED2E220( ) 200 500
33 12.5 20 710 0.15 10000 0.6 5.0 5.0 EEUED2E330( ) 200 500
47 12.5 25 920 0.15 10000 0.6 5.0 5.0 EEUED2E470( ) 200 500
16 20 990 0.15 10000 0.8 7.5 7.5 EEUED2E470S( ) 100 250
68 16 20 1000 0.15 10000 0.8 7.5 7.5 EEUED2E680S( ) 100 250
82 16 25 1200 0.15 10000 0.8 7.5 7.5 EEUED2E820( ) 100 250
18 20 1200 0.15 10000 0.8 7.5 7.5 EEUED2E820S( ) 100 250
100 16 31.5 1500 0.15 10000 0.8 7.5 EEUED2E101 100
18 25 1500 0.15 10000 0.8 7.5 7.5 EEUED2E101S( ) 100 250
150 18 31.5 1800 0.15 10000 0.8 7.5 EEUED2E151 50
220 18 40 2100 0.15 10000 0.8 7.5 EEUED2E221 50
10 10 20 350 0.20 8000 0.6 5.0 5.0 EEUED2V100( ) 200 500
22 12.5 20 480 0.20 10000 0.6 5.0 5.0 EEUED2V220( ) 200 500
33 16 20 640 0.20 10000 0.8 7.5 7.5 EEUED2V330S( ) 100 250
47 16 25 800 0.20 10000 0.8 7.5 7.5 EEUED2V470( ) 100 250
18 20 800 0.20 10000 0.8 7.5 7.5 EEUED2V470S( ) 100 250
68 16 31.5 1100 0.20 10000 0.8 7.5 EEUED2V680 100
18 25 1000 0.20 10000 0.8 7.5 7.5 EEUED2V680S( ) 100 250
82 18 25 1100 0.20 10000 0.8 7.5 7.5 EEUED2V820S( ) 100 250
250
Endu-
rance
(hours)
Design, Specifications are subject to change without notice. Ask factor y for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail.
Aluminum Electrolytic Capacitor/ED
– EE99 –
■Standard Products
450
400
(mm)(mm)(µF) (mA)
(V)
Specification
Dia. Length
Case size
Cap.
(±20%)
Lead Length
W.V. Ripple
current
(100kHz)
(+105ûC)
100 18 31.5 1200 0.20 10000 0.8 7.5 EEUED2V101 50
10 10 20 300 0.24 8000 0.6 5.0 5.0 EEUED2G100( ) 200 500
15 12.5 20 410 0.24 10000 0.6 5.0 5.0 EEUED2G150( ) 200 500
22 12.5 25 500 0.24 10000 0.6 5.0 5.0 EEUED2G220( ) 200 500
16 20 600 0.24 10000 0.8 7.5 7.5 EEUED2G220S( ) 100 250
33 16 20 730 0.24 10000 0.8 7.5 7.5 EEUED2G330S( ) 100 250
47 16 25 840 0.24 10000 0.8 7.5 7.5 EEUED2G470( ) 100 250
18 20 840 0.24 10000 0.8 7.5 7.5 EEUED2G470S( ) 100 250
68 18 31.5 1200 0.24 10000 0.8 7.5 EEUED2G680 50
82 18 40 1500 0.24 10000 0.8 7.5 EEUED2G820 50
10 12.5 20 350 0.24 10000 0.6 5.0 5.0 EEUED2W100( ) 200 500
15 12.5 25 560 0.24 10000 0.6 5.0 5.0 EEUED2W150 200 500
22 16 20 680 0.24 10000 0.8 7.5 7.5 EEUED2W220S ( ) 100 250
33 16 31.5 850 0.24 10000 0.8 7.5 EEUED2W330 100
18 25 850 0.24 10000 0.8 7.5 7.5 EEUED2W330S( ) 100 250
47 18 31.5 1000 0.24 10000 0.8 7.5 EEUED2W470 50
68 18 40 1300 0.24 10000 0.8 7.5 EEUED2W680 50
350
(mm) (pcs) (pcs)
(mm)
Lead Space Part No. Taping
Lead
Dia. Straight Leads
Taping
*B
Min. Packaging Q'ty
Straight
Endu-
rance
(hours)
D.F.
(120Hz)
(+20°C)
When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch B=5mm, 7.5mm.
The taping dimentions are explained on p.45 of our Catalog. Please use it as a reference guide.
