SSI8900 Series Optically Coupled Isolators BASEEFA CERTIFIED The SSI8901/2/3/10 are a family of optically coupled isolators, each consisting of a near infrared light emitting diode, coupled to an NPN silicon phototransistor sealed in an injection moulded plastic housing. This series is designed for applications requiring high voltage isolation between input and output. All electrical parameters are 100% tested by manufacturing. Specifications are guaranteed to a 0.65% AQL * 10KV electrical rating * High current transfer ratio-100% min@ 1m * BASEEFA Certified MECHANICAL DATA 13.9 12.7 7.62 min 5.84 5.59 LED Anode Polarity(Pin1) Marking Slot (1) (4) 2.54 (3) (2) (1) (4) (2) (3) Symbolising in White on This Face as Detail 1mm Min 1mm MIN WALL THICKNESS O6.6 6.1 SSI890X OPTOISOLATOR BAS Ex89C2096U EEx BEDFORD OPTO BEDFORD OPTO TECHNOLOGY LTD LINDSAYLANDS, BIGGAR,LANARKSHIRE ML12 6NR Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: bill@bot.co.uk ISS A 6.4.00 ABSOLUTE MAXIMUM RATINGS (25 C unless otherwise noted) SSI8900 INPUT DIODE FORWARD DC CURRENT REVERSE DC VOLTAGE POWER DISSIPATION 50mA (3) 2V 100mW (4) OUTPUT PHOTOTRANSISTOR COLLECTOR-EMITTER VOLTAGE EMITTER-COLLECTOR VOLTAGE POWER DISSIPATION 30 V 5V 100 mW (5) OPERATING TEMP -40OC TO +85OC STORAGE TEMP -40OC TO +85OC INPUT-TO-OUTPUT ISOLATION VOLTAGE LEAD S0LDERING TEMP (2) 1.6mm from case for 5sec with +10KV DC (1) 240OC soldering iron NOTES 1 Measured with input diode leads shorted together and output leads shorted together. 2 RMA Flux is recommended. Duration can be extended to 10 sec. max. when flow soldering. 3 Derate linearly 0.73 mA/OC above 25OC 4 Derate linearly 1.67 mW/OC above 25OC 5 Derate linearly 1.67 mW/OC above 25OC Whilst the devices are capable of operating continually at the noted elevated temperatures users should be aware of the possibility of a reduction in CTR over long periods at high temperatures & currents. BASEEFA CERTIFIED BAS No. Ex89C2096UEExiaIIC BOT'S RANGE OF BASEEFA OPTO COUPLERS ARE OPI110 SERIES OPI1264 SERIES OPI1000 SERIES SURFACE MOUNT OPI1000L SERIES LOW PROFILE SURFACE MOUNT SURFACE MOUNT TAPED AND REELED 1mA If CTR TYPES IN ALL FAMILIES BEDFORD OPTO TECHNOLOGY LTD LINDSAYLANDS, BIGGAR,LANARKSHIRE ML12 6NR Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: bill@bot.co.uk ISS A 6.4.00 SSI8900 OPTO ELECTRONIC DATA (TA = 25OC) PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDISTIONS INPUT DIODE Forward Voltage VF 1.5 V If = 20mA Reverse Current IR 100 uA Vr = 2V OUTPUT PHOTOTRANSISTOR Collector-Emitter Breakdown Voltage V(BR)CEO 30 V Ic = 1mA If = 0 Emitter-Collector Breakdown Voltage V(BR)ECO 5 V Ie = 100uA nA Vce = 10V Collector-Emitter Dark Current 100 ICEO COUPLED CHARACTERISTICS DC Current transfer ratio IC/IF SSI8901 25 % If=10mA, Vce=5V SSI8902 50 % If=10mA, Vce=5V SSI8903 100 % If=10mA, Vce=5V SSI8910 100 % If=1mA, Vce=5V 10 KV See Note V If=10mA, Ic=1.6mA Isolation Voltage VISO Collector-emitter saturation voltage 0.4 VCE(SAT) Turn-on time t on 5 uS Ic=10mA, Vcc=10V, RL=100ohm Turn-off time t off 5 uS Ic=10mA, Vcc=10V, RL=100ohm NOTE: Measured with input diode leads shorted together and output leads shorted together. (Sample testing only). OPTO ELECTRONIC SOLUTIONS BEDFORD OPTO TECHNOLOGY LTD LINDSAYLANDS, BIGGAR,LANARKSHIRE, ML12 6NR Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: bill@bot.co.uk ISS A 6.4.00