AMPHENOL CORPORATION
Amphenol Industrial
Phone: 888-364-9011
191 Delaware Avenue
Sidney, NY 13838-1395
www.amphenol-industrial.com
Amphenol® 97 Series Connectors are UL recognized and CSA recognized.
www.amphenol-industrial.com
ACA-B and GT Series
Reverse Bayonet Coupling Connectors
Amphenol®
For further information on your individual application requirements, contact:
Amphenol Corporation
Amphenol Industrial Operations
191 Delaware Avenue
Sidney, New York 13838-1395
Phone: 888-364-9011 Fax: 520-397-7169
View and download or print Amphenol catalogs on-line at: www.amphenol-industrial.com
Amphenol Industrial is a Certied ISO 9001 Manufacturer
Table of Contents Page
Amphenol® ACA-B Reverse Bayonet Coupling Connectors
General Description ------------------------------------------------------------------- 1
ACA-B Connector Classes -------------------------------------------------------------- 2
ACA 3101F-B inline receptacle ------------------------------------------------------- 3
ACA 3101E-B inline receptacle ------------------------------------------------------- 4
ACA 3101G-B inline receptacle ------------------------------------------------------- 5
ACA 3101R-B inline receptacle ------------------------------------------------------- 6
ACA 3102E-B box mount receptacle for front panel mounting ---------------------------------- 7
ACA 3103F-B wall mount receptacle for rear panel mounting ---------------------------------- 8
ACA 3103E-B wall mount receptacle for rear panel mounting ---------------------------------- 9
ACA 3103G-B wall mount receptacle for rear panel mounting --------------------------------- 10
ACA 3103R-B wall mount receptacle for rear panel mounting --------------------------------- 11
ACA 3106F-B straight plug --------------------------------------------------------- 12
ACA 3106E-B straight plug --------------------------------------------------------- 13
ACA 3106G-B straight plug -------------------------------------------------------- 14
ACA 3106R-B straight plug --------------------------------------------------------- 15
ACA 3107A-B jam nut receptacle ---------------------------------------------------- 16
ACA 3108F-B 90 degree angle plug -------------------------------------------------- 17
ACA 3108E-B 90 degree anlge plug -------------------------------------------------- 18
ACA-B Connectors How to Order --------------------------------------------------------- 78
Amphenol® GT Series Reverse Bayonet Coupling Connectors
General Description ------------------------------------------------------------------ 19
GT Connector Classes ---------------------------------------------------------------- 20
GT01A inline receptacle ----------------------------------------------------------- 21
GT01AF/01F inline receptacle ------------------------------------------------------ 22
GT01G inline receptacle ---------------------------------------------------------- 23
GT01R inline receptacle- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 24
GT01RV inline receptacle --------------------------------------------------------- 25
GT02R box mount receptacle for front panel mounting ------------------------------------- 26
GT030 square ange receptacle for rear panel mounting ------------------------------------ 27
GT030A square ange receptacle for rear panel mounting ----------------------------------- 28
GT030AF/030F square ange receptacle for rear panel mounting ----------------------------- 29
GT030G square ange receptacle for rear panel mounting ---------------------------------- 30
GT030R square ange receptacle for rear panel mounting ----------------------------------- 31
GT030RV square ange receptacle for rear panel mounting- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 32
GT06A straight plug -------------------------------------------------------------- 33
GT06AF/06F straight plug --------------------------------------------------------- 34
GT06CF straight plug ------------------------------------------------------------ 35
GT06G straight plug ------------------------------------------------------------- 36
GT06AMI/GT06RMI ------------------------------------------------------------- 37
GT06R straight plug ------------------------------------------------------------- 38
GT06RV straight plug ------------------------------------------------------------ 39
GT06SB straight plug ------------------------------------------------------------ 40
GT07R jam nut receptacle --------------------------------------------------------- 41
GT070 jam nut receptacle --------------------------------------------------------- 42
GT08A 90° angle plug ------------------------------------------------------------ 43
GT08AF/08F 90° angle plug -------------------------------------------------------- 44
GT08R 90° angle plug ------------------------------------------------------------ 45
GT05 dummy receptacle ---------------------------------------------------------- 46
GTTB thru-bulkhead receptacles ---------------------------------------------------- 47
GT Connectors How to Order ----------------------------------------------------------- 79
Amphenol ACA-B/GT Reverse Bayonet Insert Arrangements
Insert availability --------------------------------------------------------------48-50
Insert alternate positioning --------------------------------------------------------- 51
Solder contacts ----------------------------------------------------------------- 52
Crimp contacts ----------------------------------------------------------------- 53
RADSOK® technology and crimp socket contacts ----------------------------------------- 54
Contact arrangements ----------------------------------------------------------55-77
Amphenol ACA-B/GT Reverse Bayonet Accessories
10-40450, 10-36675, 10-580649 sealing gaskets ----------------------------------------- 80
Receptacle protection caps -------------------------------------------------------- 81
Plug protection caps ------------------------------------------------------------- 82
Rear mounting data - receptacles, sealing plugs, sealing ranges ------------------------------ 83
MS3057-A cable clamp ----------------------------------------------------------- 84
MS3420 bushing --------------------------------------------------------------- 85
MS3057-C style (10-350349) cable clamp ---------------------------------------------- 86
Glands ---------------------------------------------------------------------- 87
GT Amphe-Power Connectors with RADSOK® Technology,
Amphe-Power™ Amphe-GTR, Power GT -------------------------------------------------- 88
Special Application GT Connectors:
GTC-M Series with metal clips, GT-PC Connectors for high voltage power applications,
GT Connectors for the HMI Lighting industry -------------------------------------------- 89
Additional Amphenol Industrial Products for the Rail Industry -------------------------------90, 91
1
1
Amphenol ACA-B Connectors
with reverse bayonet coupling
The ACA-B is designed for commercial and Industrial
environments requiring a rugged bayonet style connec-
tor for heavy duty power and signal applications.
A comprehensive selection of insert arrangements and acces-
sory hardware configurations are featured to accommodate
heavy-duty, commercial wire and cable.
ACA-B is manufactured in accordance with MIL-DTL-5015 and
VG95234. The insulators are made of high quality polychloro-
prene material and can withstand temperatures of –55 to +125
degrees C. The rugged shell is made from aluminum alloy and
plated with a variety of finishes to meet any application. Con-
tacts are machined from copper alloy or brass and can be
plated with gold or silver.
Common applications include automation, machine tool, robot-
ics, instrumentation, process control, material handling, and
test and measurement.
Features of the Amphenol ® ACA-B Reverse
Bayonet Coupling Connectors with MIL-DTL-
5015 insert patterns:
• Quick positive coupling
• Audible and tactile indication of full coupling
• Waterproof - IP67 rated
• No lockwiring required
• High shock and vibration capabilites
• Inserts available in Neoprene
• Available in both crimp and solder terminations
• Contacts available in gold and silver plating
• Numerous finishes available
• Zinc alloy plating (cadmium free) available
• Rugged construction
• Intermateable with existing VG95234 connectors
• 500 couplings minimum
• Up to 50% more ampacity with the use of RADSOK®
socket contacts. Consult Amphenol Industrial Opera-
tions for more information or see Amphenol® Amphe-
Power Connectors with RADSOK® Technology, SL-
391 (online at www.amphenol-industrial.com).
• Operating temperature range: -55°c to 125°c
RoHS Compliant Product
Available – Consult
Amphenol Industrial Operations.
®
R
o
H
S
A
m
p
h
e
n
o
l
E
U
/
2
0
0
2
/
9
5
/
E
C
Features of the Amphenol® ACA-B Reverse
Bayonet Coupling Connectors with
SAE AS50151 insert patterns:
A comprehensive selection of insert arrangements and acces-
sory hardware congurations are featured to accommodate
heavy-duty, commercial wire and cable.
ACA-B is manufactured in accordance with SAE AS50151 and
VG95234. The insulators are made of high quality polychloro-
prene material and can withstand temperatures of -55 to +125
degrees C. The rugged shell is made from aluminum alloy and
plated with a variety of nishes to meet any application. Con-
tacts are machined from copper alloy or brass and can be plated
with gold or silver.
Common applications include automation, machine tool, robot-
ics, instrumentation, process control, material handling, and
test and measurement.
1
Amphenol ACA-B Connectors
with reverse bayonet coupling
The ACA-B is designed for commercial and Industrial
environments requiring a rugged bayonet style connec-
tor for heavy duty power and signal applications.
A comprehensive selection of insert arrangements and acces-
sory hardware configurations are featured to accommodate
heavy-duty, commercial wire and cable.
ACA-B is manufactured in accordance with MIL-DTL-5015 and
VG95234. The insulators are made of high quality polychloro-
prene material and can withstand temperatures of –55 to +125
degrees C. The rugged shell is made from aluminum alloy and
plated with a variety of finishes to meet any application. Con-
tacts are machined from copper alloy or brass and can be
plated with gold or silver.
Common applications include automation, machine tool, robot-
ics, instrumentation, process control, material handling, and
test and measurement.
Features of the Amphenol ® ACA-B Reverse
Bayonet Coupling Connectors with MIL-DTL-
5015 insert patterns:
• Quick positive coupling
• Audible and tactile indication of full coupling
• Waterproof - IP67 rated
• No lockwiring required
• High shock and vibration capabilites
• Inserts available in Neoprene
• Available in both crimp and solder terminations
• Contacts available in gold and silver plating
• Numerous finishes available
• Zinc alloy plating (cadmium free) available
• Rugged construction
• Intermateable with existing VG95234 connectors
• 500 couplings minimum
• Up to 50% more ampacity with the use of RADSOK®
socket contacts. Consult Amphenol Industrial Opera-
tions for more information or see Amphenol® Amphe-
Power Connectors with RADSOK® Technology, SL-
391 (online at www.amphenol-industrial.com).
• Operating temperature range: -55°c to 125°c
RoHS Compliant Product
Available – Consult
Amphenol Industrial Operations.
®
R
o
H
S
A
m
p
h
e
n
o
l
E
U
/
2
0
0
2
/
9
5
/
E
C
2
25
ACA-B
Connector
Classes
3
30
ACA 3101F-B
inline receptacle
• Receptacle with solid backshell and rear accessory threads
• Includes grommet and grommet sleeve
All dimensions for reference only.
Inches
Shell
Size
B
Thread
Class 2A
F
Min.
K
Min.
L
Max.
M
+ .016
– .000
N
+ .000
– .006
P
± .008
Q
± .008
S
Max.
10SL .6250-24 UNEF .409 .374 1.969 .717 .717 .110 .811 .992
14S .7500-20 UNEF .520 .374 1.969 .717 .969 .126 1.000 1.173
16S .8750-20 UNEF .638 .374 1.969 .717 1.079 .126 1.126 1.272
16 .8750-20 UNEF .638 .374 2.362 .846 1.079 .126 1.126 1.272
18 1.0000-20 UNEF .756 .374 2.362 .907 1.213 .157 1.248 1.370
20 1.1875-18 UNEF .867 .374 2.362 .907 1.346 .157 1.374 1.488
22 1.1875-18 UNEF .965 .374 2.362 .907 1.472 .157 1.500 1.618
24 1.4375-18 UNEF 1.094 .374 2.560 .907 1.610 .157 1.626 1.756
28 1.4375-18 UNEF 1.228 .374 2.560 .947 1.839 .157 1.874 2.004
32 1.7500-18 UNS 1.488 .433 2.560 .947 2.102 .157 2.126 2.248
36 2.0000-18 UNS 1.780 .465 3.150 .947 2.346 .157 2.386 2.504
Millimeters
Shell
Size
F
Min.
K
Min.
L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15
P
± 0.2
Q
± 0.2
S
Max.
10SL 10.4 9.5 50 18.2 18.2 2.8 20.6 25.2
14S 13.2 9.5 50 18.2 24.6 3.2 25.4 29.8
16S 16.2 9.5 50 18.2 27.4 3.2 28.6 32.3
16 16.2 9.5 60 21.5 27.4 3.2 28.6 32.3
18 19.2 9.5 60 23.0 30.8 4.0 31.7 34.8
20 22.0 9.5 60 23.0 34.2 4.0 34.9 37.8
22 24.5 9.5 60 23.0 37.4 4.0 38.1 41.1
24 27.8 9.5 65 23.0 40.9 4.0 41.3 44.6
28 31.2 9.5 65 24.1 46.7 4.0 47.6 50.9
32 37.8 11.0 65 24.1 53.4 4.0 54.0 57.1
36 45.2 11.8 80 24.1 59.6 4.0 60.6 63.6
N
MP
L
F
K
B
Q
S
4
31
ACA 3101E-B
inline receptacle
All dimensions for reference only.
Inches
Shell
Size
B
Max.
L
Max.
M
+ .016
– .000
N
+ .000
– .006
P
± .008
Q
Max.
S
Max.
KK
Max.
LL
Max.
10SL .256 2.362 .717 .717 .110 .886 .992 .894 4.720
14S .354 2.440 .717 .969 .126 1.161 1.173 1.083 4.720
16S .433 2.756 .717 1.079 .126 1.240 1.272 1.181 4.720
16 .433 2.756 .846 1.079 .126 1.240 1.272 1.181 4.921
18 .559 3.031 .907 1.213 .157 1.358 1.370 1.300 4.921
20 .622 3.031 .907 1.346 .157 1.476 1.488 1.476 4.921
22 .622 3.031 .907 1.472 .157 1.594 1.618 1.476 4.921
24 .843 3.346 .907 1.610 .157 1.752 1.756 1.705 4.921
28 .843 3.346 .947 1.839 .157 1.969 2.004 1.705 4.921
32 1.051 3.346 .947 2.102 .157 2.224 2.248 2.035 4.921
36 1.248 4.134 .947 2.346 .157 2.480 2.504 2.283 5.315
Millimeters
Shell
Size
B
Max.
L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15
P
± 0.2
Q
Max.
S
Max.
KK
Max.
LL
Max.
10SL 6.5 60 18.2 18.2 2.8 22.5 25.2 22.7 120
14S 9.0 62 18.2 24.6 3.2 29.5 29.8 27.5 120
16S 11.0 70 18.2 27.4 3.2 31.5 32.3 30.0 120
16 11.0 70 21.5 27.4 3.2 31.5 32.3 30.0 125
18 14.2 77 23.0 30.8 4.0 34.5 34.8 33.0 125
20 15.8 77 23.0 34.2 4.0 37.5 37.8 37.5 125
22 15.8 77 23.0 37.4 4.0 40.5 41.1 37.5 125
24 21.4 85 23.0 40.9 4.0 44.5 44.6 43.3 125
28 21.4 85 24.1 46.7 4.0 50.0 50.9 43.3 125
32 26.7 85 24.1 53.4 4.0 56.5 57.1 51.7 125
36 31.7 105 24.1 59.6 4.0 63.0 63.6 58.0 135
• Receptacle with cable clamp and telescopic bushing
• Includes grommet and grommet sleeve
N
MP
Q
SLL
L
BK
K
5
32
ACA 3101G-B
inline receptacle
• Receptacle with backshell for heat shrink termination
• Does not include grommet and grommet sleeve
All dimensions for reference only.
Inches
Shell
Size
J
± .008
K
± .020
L
Max.
M
+ .016
– .000
N
+ .000
– .006
P
± .008
Q
Max.
S
Max.
Z
Min.
BB
Max.
JJ
± .008
KK
± .008
10SL .138 .461 1.969 .717 .717 .110 .886 .992 .303 .524 .610 .669
14S .138 .461 1.969 .717 .969 .126 1.161 1.173 .417 .669 .752 .791
16S .138 .461 1.969 .717 1.079 .126 1.240 1.272 .531 .862 .941 .925
16 .138 .453 2.362 .846 1.079 .126 1.240 1.272 .531 .862 .941 .925
18 .138 .453 2.362 .907 1.213 .157 1.358 1.370 .575 .862 .941 1.043
20 .138 .500 2.559 .907 1.346 .157 1.476 1.488 .736 1.031 1.165 1.189
22 .138 .500 2.559 .907 1.472 .157 1.594 1.618 .819 1.031 1.165 1.323
24 .138 .500 2.559 .907 1.610 .157 1.752 1.756 .969 1.358 1.488 1.421
28 .138 .500 2.559 .947 1.839 .157 1.969 2.004 1.062 1.358 1.488 1.630
32 .138 .598 2.756 .947 2.102 .157 2.224 2.248 1.311 1.717 1.882 1.913
36 .138 .598 3.150 .947 2.346 .157 2.480 2.504 1.516 1.717 1.882 2.157
Millimeters
Shell
Size
J
± 0.2
K
± 0.5
L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15
P
± 0.2
Q
Max.
S
Max.
Z
Min.
BB
Max.
JJ
± 0.2
KK
± 0.2
10SL 3.5 11.7 50 18.2 18.2 2.8 22.5 25.2 7.7 13.3 15.5 17.0
14S 3.5 11.7 50 18.2 24.6 3.2 29.5 29.8 10.6 17.0 19.1 20.1
16S 3.5 11.7 50 18.2 27.4 3.2 31.5 32.3 13.5 21.9 23.9 23.5
16 3.5 11.5 60 21.5 27.4 3.2 31.5 32.3 13.5 21.9 23.9 23.5
18 3.5 11.5 60 23.0 30.8 4.0 34.5 34.8 14.6 21.9 23.9 26.5
20 3.5 12.7 65 23.0 34.2 4.0 37.5 37.8 18.7 26.2 29.6 30.2
22 3.5 12.7 65 23.0 37.4 4.0 40.5 41.1 20.8 26.2 29.6 33.6
24 3.5 12.7 65 23.0 40.9 4.0 44.5 44.6 24.6 34.5 37.8 36.1
28 3.5 12.7 65 24.1 46.7 4.0 50.0 50.9 27.0 34.5 37.8 41.4
32 3.5 15.2 70 24.1 53.4 4.0 56.5 57.1 33.3 43.6 47.8 48.6
36 3.5 15.2 80 24.1 59.6 4.0 63.0 63.6 38.5 43.6 47.8 54.8
N
MP
Q
SL
K
K
K
BBZ JJ
J
6
33
ACA 3101R-B
inline receptacle
• Receptacle with short endbell for individual wire sealing
• Includes grommet and grommet sleeve
All dimensions for reference only.
Inches
Shell
Size
L
Max.
M
+ .016
– .000
N
+ .000
– .006
P
± .008
Q
Max.
S
Max.
KK
Max.
10SL 1.890 .717 .717 .110 .886 .992 .787
14S 1.890 .717 .969 .126 1.161 1.173 .945
16S 1.890 .717 1.079 .126 1.240 1.272 1.024
16 2.205 .846 1.079 .126 1.240 1.272 1.024
18 2.244 .907 1.213 .157 1.358 1.370 1.161
20 2.244 .907 1.346 .157 1.476 1.488 1.299
22 2.244 .907 1.472 .157 1.594 1.618 1.417
24 2.244 .907 1.610 .157 1.752 1.756 1.575
28 2.244 .947 1.839 .157 1.969 2.004 1.811
32 2.362 .947 2.102 .157 2.224 2.248 2.028
36 2.362 .947 2.346 .157 2.480 2.504 2.283
Millimeters
Shell
Size
L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15
P
± 0.2
Q
Max.
S
Max.
KK
Max.
10SL 48.0 18.2 18.2 2.8 22.5 25.2 20.0
14S 48.0 18.2 24.6 3.2 29.5 29.8 24.0
16S 48.0 18.2 27.4 3.2 31.5 32.3 26.0
16 56.0 21.5 27.4 3.2 31.5 32.3 26.0
18 57.0 23.0 30.8 4.0 34.5 34.8 29.5
20 57.0 23.0 34.2 4.0 37.5 37.8 33.0
22 57.0 23.0 37.4 4.0 40.5 41.1 36.0
24 57.0 23.0 40.9 4.0 44.5 44.6 40.0
28 57.0 24.1 46.7 4.0 50.0 50.9 46.0
32 60.0 24.1 53.4 4.0 56.5 57.1 51.5
36 60.0 24.1 59.6 4.0 63.0 63.6 58.0
N
MP
Q
S
KK
L
7
34
ACA 3102E-B
box mount receptacle for front panel mounting
• Receptacle without threads for panel mounting
• Four through mounting holes or optional metric threaded holes
All dimensions for reference only.
Inches
Shell
Size
L
± .012
M
+ .016
– .000
N
+ .000
– .006
P
± .008
R
± .004
S
± .012
T
Thru Hole
+ .004
– .000
KK
Max.
10SL 1.087 .717 .717 .110 .717 1.000 .126 .626
14S 1.087 .717 .969 .126 .906 1.181 .126 .756
16S 1.087 .717 1.079 .126 .969 1.280 .126 .882
16 1.331 .846 1.079 .126 .969 1.280 .126 .882
18 1.331 .907 1.213 .157 1.063 1.378 .126 1.008
20 1.331 .907 1.346 .157 1.157 1.496 .126 1.142
22 1.331 .907 1.472 .157 1.252 1.614 .126 1.268
24 1.331 .907 1.610 .157 1.374 1.752 .146 1.390
28 1.406 .947 1.839 .157 1.563 2.000 .146 1.630
32 1.469 .947 2.102 .157 1.752 2.244 .169 1.882
36 1.469 .947 2.346 .157 1.937 2.500 .169 2.063
Millimeters
Shell
Size
L
± 0.3
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15
P
± 0.2
R
± 0.1
S
± 0.3
T
Thru Hole
+ 0.1
– 0.0
T1
Metric
Thread
KK
Max.
10SL 27.6 18.2 18.2 2.8 18.2 25.4 3.2 M4 15.9
14S 27.6 18.2 24.6 3.2 23.0 30.0 3.2 M4 19.2
16S 27.6 18.2 27.4 3.2 24.6 32.5 3.2 M4 22.4
16 33.8 21.5 27.4 3.2 24.6 32.5 3.2 M4 22.4
18 33.8 23.0 30.8 4.0 27.0 35.0 3.2 M4 25.6
20 33.8 23.0 34.2 4.0 29.4 38.0 3.2 M4 29.0
22 33.8 23.0 37.4 4.0 31.8 41.0 3.2 M4 32.2
24 33.8 23.0 40.9 4.0 34.9 44.5 3.7 M4 35.3
28 35.7 24.1 46.7 4.0 39.7 50.8 3.7 M5 41.4
32 37.3 24.1 53.4 4.0 44.5 57.0 4.3 M5 47.8
36 37.3 24.1 59.6 4.0 49.2 63.5 4.3 M5 52.4
R
R S
S
N
MP
KK
L
82º
T
T1
THREAD
T
THRU HOLE
34
ACA 3102E-B
box mount receptacle for front panel mounting
• Receptacle without threads for panel mounting
• Four through mounting holes or optional metric threaded holes
All dimensions for reference only.
Inches
Shell
Size
L
± .012
M
+ .016
– .000
N
+ .000
– .006
P
± .008
R
± .004
S
± .012
T
Thru Hole
+ .004
– .000
KK
Max.
10SL 1.087 .717 .717 .110 .717 1.000 .126 .626
14S 1.087 .717 .969 .126 .906 1.181 .126 .756
16S 1.087 .717 1.079 .126 .969 1.280 .126 .882
16 1.331 .846 1.079 .126 .969 1.280 .126 .882
18 1.331 .907 1.213 .157 1.063 1.378 .126 1.008
20 1.331 .907 1.346 .157 1.157 1.496 .126 1.142
22 1.331 .907 1.472 .157 1.252 1.614 .126 1.268
24 1.331 .907 1.610 .157 1.374 1.752 .146 1.390
28 1.406 .947 1.839 .157 1.563 2.000 .146 1.630
32 1.469 .947 2.102 .157 1.752 2.244 .169 1.882
36 1.469 .947 2.346 .157 1.937 2.500 .169 2.063
Millimeters
Shell
Size
L
± 0.3
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15
P
± 0.2
R
± 0.1
S
± 0.3
T
Thru Hole
+ 0.1
– 0.0
T1
Metric
Thread
KK
Max.
10SL 27.6 18.2 18.2 2.8 18.2 25.4 3.2 M4 15.9
14S 27.6 18.2 24.6 3.2 23.0 30.0 3.2 M4 19.2
16S 27.6 18.2 27.4 3.2 24.6 32.5 3.2 M4 22.4
16 33.8 21.5 27.4 3.2 24.6 32.5 3.2 M4 22.4
18 33.8 23.0 30.8 4.0 27.0 35.0 3.2 M4 25.6
20 33.8 23.0 34.2 4.0 29.4 38.0 3.2 M4 29.0
22 33.8 23.0 37.4 4.0 31.8 41.0 3.2 M4 32.2
24 33.8 23.0 40.9 4.0 34.9 44.5 3.7 M4 35.3
28 35.7 24.1 46.7 4.0 39.7 50.8 3.7 M5 41.4
32 37.3 24.1 53.4 4.0 44.5 57.0 4.3 M5 47.8
36 37.3 24.1 59.6 4.0 49.2 63.5 4.3 M5 52.4
R
R S
S
N
MP
KK
L
82º
T
T1
THREAD
T
THRU HOLE
8
35
ACA 3103F-B
wall mounting receptacle for rear panel mounting
• Receptacle with backshell and rear accessory threads
• Includes wire sealing grommet and grommet sleeve for individual wires
• Four through mounting holes or optional metric threaded holes
All dimensions for reference only.
Inches
Shell
Size
B
Thread
Class 2A
F
Min.
K
Min.
L
Max.
M
+ .016
– .000
N
+ .000
– .006
P
± .008
R
± .004
S
± .012
T
Thru Hole
+ .004
– .000
10SL .6250-24 UNEF .409 .374 1.969 .717 .717 .110 .717 1.000 .126
14S .7500-20 UNEF .520 .374 1.969 .717 .969 .126 .906 1.181 .126
16S .8750-20 UNEF .638 .374 1.969 .717 1.079 .126 .969 1.280 .126
16 .8750-20 UNEF .638 .374 2.362 .846 1.079 .126 .969 1.280 .126
18 1.0000-20 UNEF .756 .374 2.362 .907 1.213 .157 1.063 1.378 .126
20 1.1875-18 UNEF .867 .374 2.362 .907 1.346 .157 1.157 1.496 .126
22 1.1875-18 UNEF .965 .374 2.362 .907 1.472 .157 1.252 1.614 .126
24 1.4375-18 UNEF 1.094 .374 2.560 .907 1.610 .157 1.374 1.752 .146
28 1.4375-18 UNEF 1.228 .374 2.560 .947 1.839 .157 1.563 2.000 .146
32 1.7500-18 UNS 1.488 .433 2.560 .947 2.102 .157 1.752 2.244 .169
36 2.0000-18 UNS 1.780 .465 3.150 .947 2.346 .157 1.937 2.500 .169
Millimeters
Shell
Size
F
Min.
K
Min.
L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15
P
± 0.2
R
± 0.1
S
± 0.3
T
Thru Hole
+ 0.1
– 0.0
T1
Metric
Thread
10SL 10.4 9.5 50 18.2 18.2 2.8 18.2 25.4 3.2 M4
14S 13.2 9.5 50 18.2 24.6 3.2 23.0 30.0 3.2 M4
16S 16.2 9.5 50 18.2 27.4 3.2 24.6 32.5 3.2 M4
16 16.2 9.5 60 21.5 27.4 3.2 24.6 32.5 3.2 M4
18 19.2 9.5 60 23.0 30.8 4.0 27.0 35.0 3.2 M4
20 22.0 9.5 60 23.0 34.2 4.0 29.4 38.0 3.2 M4
22 24.5 9.5 60 23.0 37.4 4.0 31.8 41.0 3.2 M4
24 27.8 9.5 65 23.0 40.9 4.0 34.9 44.5 3.7 M4
28 31.2 9.5 65 24.1 46.7 4.0 39.7 50.8 3.7 M5
32 37.8 11.0 65 24.1 53.4 4.0 44.5 57.0 4.3 M5
36 45.2 11.8 80 24.1 59.6 4.0 49.2 63.5 4.3 M5
R
R S
S
T
THRU HOLE
N
MP
K
F
B
L
T
THREAD
1
9
36
ACA 3103E-B
wall mount receptacle for rear panel mounting
• Receptacle with cable clamp and telescopic bushing
• Includes grommet and grommet sleeve
• Four through mounting holes or optional metric threaded holes
All dimensions for reference only.
Inches
Shell
Size
L
Max.
M
+ .016
– .000
N
+ .000
– .006
P
± .008
R
± .004
S
± .012
T
Thru Hole
+ .004
– .000
Z
Max.
KK
Max.
LL
Max.
10SL 2.362 .717 .717 .110 .717 1.000 .126 .256 .894 4.720
14S 2.440 .717 .969 .126 .906 1.181 .126 .354 1.083 4.720
16S 2.756 .717 1.079 .126 .969 1.280 .126 .433 1.181 4.720
16 2.756 .846 1.079 .126 .969 1.280 .126 .433 1.181 4.921
18 3.031 .907 1.213 .157 1.063 1.378 .126 .559 1.300 4.921
20 3.031 .907 1.346 .157 1.157 1.496 .126 .622 1.476 4.921
22 3.031 .907 1.472 .157 1.252 1.614 .126 .622 1.476 4.921
24 3.346 .907 1.610 .157 1.374 1.752 .146 .843 1.705 4.921
28 3.346 .947 1.839 .157 1.563 2.000 .146 .843 1.705 4.921
32 3.346 .947 2.102 .157 1.752 2.244 .169 1.051 2.035 4.921
36 4.134 .947 2.346 .157 1.937 2.500 .169 1.248 2.283 5.315
Millimeters
Shell
Size
L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15
P
± 0.2
R
± 0.1
S
± 0.3
T
Thru Hole
+ 0.1
– 0.0
T1
Metric
Thread
Z
Max.
KK
Max.
LL
Max.
10SL 60 18.2 18.2 2.8 18.2 25.4 3.2 M4 6.5 22.7 120
14S 62 18.2 24.6 3.2 23.0 30.0 3.2 M4 9.0 27.5 120
16S 70 18.2 27.4 3.2 24.6 32.5 3.2 M4 11.0 30.0 120
16 70 21.5 27.4 3.2 24.6 32.5 3.2 M4 11.0 30.0 125
18 77 23.0 30.8 4.0 27.0 35.0 3.2 M4 14.2 33.0 125
20 77 23.0 34.2 4.0 29.4 38.0 3.2 M4 15.8 37.5 125
22 77 23.0 37.4 4.0 31.8 41.0 3.2 M4 15.8 37.5 125
24 85 23.0 40.9 4.0 34.9 44.5 3.7 M4 21.4 43.3 125
28 85 24.1 46.7 4.0 39.7 50.8 3.7 M5 21.4 43.3 125
32 85 24.1 53.4 4.0 44.5 57.0 4.3 M5 26.7 51.7 125
36 105 24.1 59.6 4.0 49.2 63.5 4.3 M5 31.7 58.0 135
R
R S
S
T
A
LL
L
MP
T1
THREAD
THRU HOLE
ZK
10
37
ACA 3103G-B
wall mount receptacle for rear panel mounting
• Receptacle with endbell for heat shrink termination
• Does not include grommet and grommet sleeve
• Four through mounting holes or optional metric threaded holes
All dimensions for reference only.
Inches
Shell
Size
J
± .008
K
± .020
L
Max.
M
+ .016
– .000
N
+ .000
– .006
P
± .008
R
± .004
S
± .012
T
Thru Hole
+ .004
– .000
Z
Min.
BB
Max.
JJ
± .008
KK
± .008
10SL .138 .461 1.969 .717 .717 .110 .717 1.000 .126 .303 .524 .610 .669
14S .138 .461 1.969 .717 .969 .126 .906 1.181 .126 .417 .669 .752 .791
16S .138 .461 1.969 .717 1.079 .126 .969 1.280 .126 .531 .862 .941 .925
16 .138 .453 2.362 .846 1.079 .126 .969 1.280 .126 .531 .862 .941 .925
18 .138 .453 2.362 .907 1.213 .157 1.063 1.378 .126 .575 .862 .941 1.043
20 .138 .500 2.559 .907 1.346 .157 1.157 1.496 .126 .736 1.031 1.165 1.189
22 .138 .500 2.559 .907 1.472 .157 1.252 1.614 .126 .819 1.031 1.165 1.323
24 .138 .500 2.559 .907 1.610 .157 1.374 1.752 .146 .969 1.358 1.488 1.421
28 .138 .500 2.559 .947 1.839 .157 1.563 2.000 .146 1.062 1.358 1.488 1.630
32 .138 .598 2.756 .947 2.102 .157 1.752 2.244 .169 1.311 1.717 1.882 1.913
36 .138 .598 3.150 .947 2.346 .157 1.937 2.500 .169 1.516 1.717 1.882 2.157
Millimeters
Shell
Size
J
± 0.2
K
± 0.5
L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15
P
± 0.2
R
± 0.1
S
± 0.3
T
Thru Hole
+ 0.1
– 0.0
T1
Metric
Thread
Z
Min.
BB
Max.
JJ
± 0.2
KK
± 0.2
10SL 3.5 11.7 50 18.2 18.2 2.8 18.2 25.4 3.2 M4 7.7 13.3 15.5 17.0
14S 3.5 11.7 50 18.2 24.6 3.2 23.0 30.0 3.2 M4 10.6 17.0 19.1 20.1
16S 3.5 11.7 50 18.2 27.4 3.2 24.6 32.5 3.2 M4 13.5 21.9 23.9 23.5
16 3.5 11.5 60 21.5 27.4 3.2 24.6 32.5 3.2 M4 13.5 21.9 23.9 23.5
18 3.5 11.5 60 23.0 30.8 4.0 27.0 35.0 3.2 M4 14.6 21.9 23.9 26.5
20 3.5 12.7 65 23.0 34.2 4.0 29.4 38.0 3.2 M4 18.7 26.2 29.6 30.2
22 3.5 12.7 65 23.0 37.4 4.0 31.8 41.0 3.2 M4 20.8 26.2 29.6 33.6
24 3.5 12.7 65 23.0 40.9 4.0 34.9 44.5 3.7 M4 24.6 34.5 37.8 36.1
28 3.5 12.7 65 24.1 46.7 4.0 39.7 50.8 3.7 M5 27.0 34.5 37.8 41.4
32 3.5 15.2 70 24.1 53.4 4.0 44.5 57.0 4.3 M5 33.3 43.6 47.8 48.6
36 3.5 15.2 80 24.1 59.6 4.0 49.2 63.5 4.3 M5 38.5 43.6 47.8 54.8
R
R S
S
T
THRU HOLE
N
L
MP
KKJJBBZ
J
K
T
THREAD
1
11
38
ACA 3103R-B
wall mount receptacle for rear panel mounting
• Receptacle with short endbell for individual wire sealing
• Includes grommet and grommet sleeve
• Four through mounting holes or optional metric threaded holes
All dimensions for reference only.
Inches
Shell
Size
L
Max.
M
+ .016
– .000
N
+ .000
– .006
P
± .008
R
± .004
S
± .012
T
Thru Hole
+ .004
– .000
KK
Max.
10SL 1.890 .717 .717 .110 .717 1.000 .126 .787
14S 1.890 .717 .969 .126 .906 1.181 .126 .945
16S 1.890 .717 1.079 .126 .969 1.280 .126 1.024
16 2.205 .846 1.079 .126 .969 1.280 .126 1.024
18 2.244 .907 1.213 .157 1.063 1.378 .126 1.161
20 2.244 .907 1.346 .157 1.157 1.496 .126 1.299
22 2.244 .907 1.472 .157 1.252 1.614 .126 1.417
24 2.244 .907 1.610 .157 1.374 1.752 .146 1.575
28 2.244 .947 1.839 .157 1.563 2.000 .146 1.811
32 2.362 .947 2.102 .157 1.752 2.244 .169 2.028
36 2.362 .947 2.346 .157 1.937 2.500 .169 2.283
Millimeters
Shell
Size
L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15
P
± 0.2
R
± 0.1
S
± 0.3
T
Thru Hole
+ 0.1
– 0.0
T1
Metric
Thread
KK
Max.
10SL 48.0 18.2 18.2 2.8 18.2 25.4 3.2 M4 20.0
14S 48.0 18.2 24.6 3.2 23.0 30.0 3.2 M4 24.0
16S 48.0 18.2 27.4 3.2 24.6 32.5 3.2 M4 26.0
16 56.0 21.5 27.4 3.2 24.6 32.5 3.2 M4 26.0
18 57.0 23.0 30.8 4.0 27.0 35.0 3.2 M4 29.5
20 57.0 23.0 34.2 4.0 29.4 38.0 3.2 M4 33.0
22 57.0 23.0 37.4 4.0 31.8 41.0 3.2 M4 36.0
24 57.0 23.0 40.9 4.0 34.9 44.5 3.7 M4 40.0
28 57.0 24.1 46.7 4.0 39.7 50.8 3.7 M5 46.0
32 60.0 24.1 53.4 4.0 44.5 57.0 4.3 M5 51.5
36 60.0 24.1 59.6 4.0 49.2 63.5 4.3 M5 58.0
R
R S
S
N
MP
L
K
K
T
1
THREAD
T
THRU HOLE
12
39
ACA 3106F-B
straight plug
• Plug with backshell and rear accessory threads
• Includes grommet and grommet sleeve
All dimensions for reference only.
Inches
Shell
Size
B
Thread
Class 2A
F
Min.
K
Min.
L
Max.
Q
Max.
10SL .6250-24UNEF .409 .374 1.969 .898
14S .7500-20UNEF .520 .374 1.969 1.150
16S .8750-20UNEF .638 .374 1.969 1.260
16 .8750-20UNEF .638 .374 2.362 1.260
18 1.0000-20UNEF .756 .374 2.362 1.437
20 1.1875-18UNEF .867 .374 2.362 1.571
22 1.1875-18UNEF .965 .374 2.362 1.697
24 1.4375-18UNEF 1.094 .374 2.560 1.835
28 1.4375-18UNEF 1.228 .374 2.560 2.102
32 1.7500-18UNS 1.488 .433 2.560 2.366
36 2.0000-18UNS 1.780 .465 3.150 2.610
Millimeters
Shell
Size
F
Min.
K
Min.
L
Max.
Q
Max.
10SL 10.4 9.5 50 22.8
14S 13.2 9.5 50 29.2
16S 16.2 9.5 50 32.0
16 16.2 9.5 60 32.0
18 19.2 9.5 60 36.5
20 22.0 9.5 60 39.9
22 24.5 9.5 60 43.1
24 27.8 9.5 65 46.6
28 31.2 9.5 65 53.4
32 37.8 11.0 65 60.1
36 45.2 11.8 80 66.3
Q
B
F
K
L
13
40
ACA 3106E-B
straight plug
• Plug with cable clamp and telescopic bushing
• Includes grommet and grommet sleeve
All dimensions for reference only.
Inches
Shell
Size
L
Max.
Q
Max.
Z
Max.
KK
Max.
LL
Max.
10SL 2.165 .898 .256 .894 4.528
14S 2.362 1.150 .354 1.083 4.528
16S 2.362 1.260 .433 1.181 4.528
16 2.756 1.260 .433 1.181 4.724
18 2.756 1.437 .559 1.268 4.724
20 2.953 1.571 .622 1.476 4.724
22 2.953 1.697 .622 1.476 4.724
24 3.543 1.835 .843 1.705 4.724
28 3.543 2.102 .843 1.705 4.724
32 3.543 2.366 1.051 2.035 4.724
36 3.937 2.610 1.248 2.283 5.118
Millimeters
Shell
Size
L
Max.
Q
Max.
Z
Max.
KK
Max.
LL
Max.
10SL 55 22.8 6.5 22.7 115
14S 60 29.2 9.0 27.5 115
16S 60 32.0 11.0 30.0 115
16 70 32.0 11.0 30.0 120
18 70 36.5 14.2 32.2 120
20 75 39.9 15.8 37.5 120
22 75 43.1 15.8 37.5 120
24 90 46.6 21.4 43.3 120
28 90 53.4 21.4 43.3 120
32 90 60.1 26.7 51.7 120
36 100 66.3 31.7 58.0 130
L
LL
ZK
K
Q
14
41
ACA 3106G-B
straight plug
• Plug with backshell for heat shrink termination
• Does not include grommet and grommet sleeve
All dimensions for reference only.
Inches
Shell
Size
J
± .008
K
± .020
L
Max.
Q
Max.
Z
Min.
BB
Max.
JJ
± .008
KK
± .008
10SL .138 .461 1.969 .898 .303 .524 .610 .669
14S .138 .461 1.969 1.150 .417 .669 .752 .791
16S .138 .461 1.969 1.260 .531 .862 .941 .925
16 .138 .453 2.362 1.260 .531 .862 .941 .925
18 .138 .453 2.362 1.437 .575 .862 .941 1.043
20 .138 .500 2.559 1.571 .736 1.031 1.165 1.189
22 .138 .500 2.559 1.697 .819 1.031 1.165 1.323
24 .138 .500 2.559 1.835 .969 1.358 1.488 1.421
28 .138 .500 2.559 2.102 1.063 1.358 1.488 1.630
32 .138 .598 2.756 2.366 1.311 1.717 1.882 1.913
36 .138 .598 3.150 2.610 1.516 1.717 1.882 2.157
Millimeters
Shell
Size
J
± 0.2
K
± 0.5
L
Max.
Q
Max.
Z
Min.
BB
Max.
JJ
± 0.2
KK
± 0.2
10SL 3.5 11.7 50 22.8 7.7 13.3 15.5 17.0
14S 3.5 11.7 50 29.2 10.6 17.0 19.1 20.1
16S 3.5 11.7 50 32.0 13.5 21.9 23.9 23.5
16 3.5 11.5 60 32.0 13.5 21.9 23.9 23.5
18 3.5 11.5 60 36.5 14.6 21.9 23.9 26.5
20 3.5 12.7 65 39.9 18.7 26.2 29.6 30.2
22 3.5 12.7 65 43.1 20.8 26.2 29.6 33.6
24 3.5 12.7 65 46.6 24.6 34.5 37.8 36.1
28 3.5 12.7 65 53.4 27.0 34.5 37.8 41.4
32 3.5 15.2 70 60.1 33.3 43.6 47.8 48.6
36 3.5 15.2 80 66.3 38.5 43.6 47.8 54.8
Q
BB JJ KKZ
J
K
L
15
42
ACA 3106R-B
straight plug
• Plug with short endbell for individual wire sealing
• Includes grommet and grommet sleeve
All dimensions for reference only.
Inches
Shell
Size
L
Max.
Q
Max.
KK
Max.
10SL 1.417 .898 .787
14S 1.437 1.150 .945
16S 1.437 1.260 1.024
16 1.929 1.260 1.024
18 1.929 1.437 1.161
20 1.969 1.571 1.299
22 1.969 1.697 1.417
24 2.008 1.835 1.543
28 2.008 2.102 1.811
32 2.087 2.366 2.028
36 2.106 2.610 2.283
Millimeters
Shell
Size
L
Max.
Q
Max.
KK
Max.
10SL 36.0 22.8 20.0
14S 36.5 29.2 24.0
16S 36.5 32.0 26.0
16 49.0 32.0 26.0
18 49.0 36.5 29.5
20 50.0 39.9 33.0
22 50.0 43.1 36.0
24 51.0 46.6 40.0
28 51.0 53.4 46.0
32 53.0 60.1 51.5
36 53.5 66.3 58.0
K
K
QL
16
43
ACA 3107A-B
jam nut receptacle
• For rear panel single hole mounting
• Panel seal O-ring included
• Environment proof
All dimensions for reference only.
Inches
Shell
Size
B
Thread
Class 2A
G
± .012
J
Wall Thickness M
± .012
N
+ .000
– .006
P
± .007
R
± .016
S
± .012Min. Max.
10SL .8750-20 UNEF .441 .094 .205 .965 .717 .157 1.062 1.252
14S 1.1250-18 UNEF .575 .094 .295 1.055 .969 .189 1.312 1.626
16S 1.2500-18 UNEF .618 .094 .295 1.055 1.079 .189 1.500 1.748
16 1.2500-18 UNEF .618 .094 .295 1.264 1.079 .189 1.500 1.748
18 1.3750-18 UNEF .661 .094 .354 1.327 1.213 .189 1.562 1.875
20 1.5000-18 UNEF .709 .094 .358 1.327 1.346 .189 1.750 2.000
22 1.6250-18 UNEF .795 .094 .358 1.327 1.472 .189 2.000 2.134
24 1.7500-18 UNEF .795 .094 .358 1.327 1.610 .189 2.000 2.252
28 2.0000-18 UNS .886 .094 .394 1.386 1.839 .220 2.188 2.500
32 2.2500-16 UN .972 .094 .394 1.386 2.102 .220 2.438 2.748
36 2.5000-16 UN 1.059 .094 .327 1.386 2.346 .220 2.812 3.000
Millimeters
Shell
Size
G
± 0.3
J
Wall Thickness M
± 0.3
N
+ 0.00
– 0.15
P
± 0.2
R
± 0.4
S
± 0.3Min. Max.
10SL 11.2 2.4 5.2 24.5 18.2 4.0 27 31.8
14S 14.6 2.4 7.5 26.8 24.6 4.8 33 41.3
16S 15.7 2.4 7.5 26.8 27.4 4.8 38 44.4
16 15.7 2.4 7.5 32.1 27.4 4.8 38 44.4
18 16.8 2.4 9.0 33.7 30.8 4.8 40 47.6
20 18.0 2.4 9.1 33.7 34.2 4.8 44 50.8
22 20.2 2.4 9.1 33.7 37.4 4.8 51 54.2
24 20.2 2.4 9.1 33.7 40.9 4.8 51 57.2
28 22.5 2.4 10.0 35.2 46.7 5.6 56 63.5
32 24.7 2.4 10.0 35.2 53.4 5.6 62 69.8
36 26.9 2.4 8.3 35.2 59.6 5.6 71 76.2
G
S
S
G
R
N
M
P
BO-Ring
J
17
44
ACA 3108F-B
90° angle plug
• 90° plug for angled attachment to panels with rear accessory threads
• Includes grommet and grommet sleeve
All dimensions for reference only.
Inches
Shell
Size
B
Thread
Class 2A
F
Max.
J
Min.
K
Max.
L
Max.
Q
Max.
10SL .6250-24UNEF .337 .370 1.181 1.772 .898
14S .7500-20UNEF .462 .370 1.181 1.850 1.150
16S .8750-20UNEF .587 .370 1.181 1.890 1.299
16 .8750-20UNEF .587 .370 1.181 2.244 1.299
18 1.0000-20UNEF .685 .370 1.378 2.283 1.437
20 1.1875-18UNEF .810 .370 1.378 2.402 1.571
22 1.1875-18UNEF .915 .370 1.378 2.402 1.697
24 1.4375-18UNEF 1.025 .370 1.575 2.598 1.835
28 1.4375-18UNEF 1.139 .370 1.575 2.598 2.102
32 1.7500-18UNS 1.447 .433 1.772 2.835 2.366
36 2.0000-18UNS 1.687 .496 1.969 2.953 2.610
Millimeters
Shell
Size
F
Max.
J
Min.
K
Max.
L
Max.
Q
Max.
10SL 8.5 9.4 30 45 22.8
14S 11.7 9.4 30 47 29.2
16S 14.9 9.4 30 48 33.0
16 14.9 9.4 30 57 33.0
18 17.4 9.4 35 58 36.5
20 20.5 9.4 35 61 39.9
22 23.2 9.4 35 61 43.1
24 26.0 9.4 40 66 46.6
28 28.9 9.4 40 66 53.4
32 36.7 11.0 45 72 60.1
36 42.8 12.6 50 75 66.3
Q
K
J
L
F
B
18
45
ACA 3108E-B
90° angle plug
• 90° plug for angled attachment to panels with cable clamp and telescopic bushing
• Includes grommet and grommet sleeve
All dimensions for reference only.
Inches
Shell
Size
K
Max.
L
Max.
Q
Max.
Z
Max.
KK
Max.
LL
Max.
10SL 1.654 1.772 .898 .220 .894 3.937
14S 1.654 1.850 1.150 .312 1.083 3.937
16S 1.772 1.890 1.299 .437 1.181 3.937
16 1.772 2.244 1.299 .437 1.181 3.937
18 2.087 2.283 1.437 .562 1.299 3.937
20 2.087 2.402 1.571 .625 1.476 3.937
22 2.087 2.402 1.697 .625 1.476 3.937
24 2.283 2.598 1.835 .750 1.705 3.937
28 2.283 2.598 2.102 .750 1.705 3.937
32 2.598 2.835 2.366 .937 2.061 4.331
36 2.717 2.953 2.610 1.250 2.283 4.331
Millimeters
Shell
Size
K
Max.
L
Max.
Q
Max.
Z
Max.
KK
Max.
LL
Max.
10SL 42 45 22.8 5.58 22.7 100
14S 42 47 29.2 7.92 27.5 100
16S 45 48 33.0 11.09 30.0 100
16 45 57 33.0 11.09 30.0 100
18 53 58 36.5 14.27 33.0 100
20 53 61 39.9 15.87 37.5 100
22 53 61 43.1 15.87 37.5 100
24 58 66 46.6 19.05 43.3 100
28 58 66 53.4 19.05 43.3 100
32 66 72 60.1 23.79 51.7 110
36 69 75 66.3 31.75 58.0 110
Q
L
ZKK
K
LL
19
Designed originally for use by the military, the heavy duty
GT connector has become widely used in commercial,
geophysical, aerospace, ground support and shipboard
applications. It is the preferred connector for mass transit.
Variety of Shell Styles are Available
Wall Mount Receptacle
Inline Receptacle
Straight Plug
Jam Nut Receptacle
Amphenol® GT reverse bayonet coupling connectors
with SAE AS50151 insert patterns features:
• Quick positive coupling
• Audible, tactile and visual indication of full coupling
• Waterproof – IP67 rated
• No lockwiring required
• High shock and vibration capabilities
• Inserts available in Neoprene and Viton* materials
• Low smoke/ame retardant inserts also available
• Operating temperature range:
With Neoprene inserts: –55°C to +125°C
With Viton** inserts: –50°C to +200°C
With low smoke/ame retardant inserts: –55°C to +125°C
• Available in both crimp and solder terminations
• Contacts available in gold and silver plating
• Numerous commercial nishes available
• Zinc alloy plating (cadmium free) available
• Rugged construction; aluminum or stainless steel
components
• Available with resilient cover coupling for added damage
protection and increased gripping surface
• Intermateable with existing VG95234 connectors
• 2000 couplings minimum
• UL recognized
• Up to 50% more ampacity with the use of RADSOK®
technology (see page 54)
Amphenol’s special offerings of GT Series connectors (see
end of catalog) include: GT Amphe-Power® Connectors with
RADSOK® technology, the GTC-M Series with metal clip in-
serts and GT-PC Series for high voltage power applica tions.
There is also information on other Amphenol Industrial Prod-
ucts for the Rail Industry at the end of this catalog.
For further information on your individual application require-
ments, contact:
Amphenol Corporation
Amphenol Industrial Operations
191 Delaware Avenue
Sidney, New York 13838-1395
Phone: 888-364-9011 Fax: 520-397-7169
www.amphenol-industrial.com
NOTE:
The connector products in this brochure were formerly known as
Bendix® products. These products are now manufactured and sold
under the Amphenol® brand name. The name “Amphenol” will replace
the name “Bendix” on products and literature in the future.
**For availability of Viton inserts consult Amphenol, Sidney, NY.
Viton is a registered trademark of Dupont/Dow Corning.
Amphenol GT Connectors
with reverse bayonet coupling
®
20
29
GT
Connector
Classes
21
37
GT01A
inline receptacle
• Includes backshell for accessory attachment
• Without wire sealing grommet and cable clamp
• Non-environment proof
All dimensions for reference only.
Inches
Shell
Size
B
Thread
Class 2A
F
Min.
K
Min.
L
Max.
M
+ .016
– .000
N
+ .000
– .006
P
± .008
Q
± .008
S
Max.
10SL .6250-24 UNEF .409 .374 1.969 .717 .717 .110 .811 .992
14S .7500-20 UNEF .520 .374 1.969 .717 .969 .126 1.000 1.173
16S .8750-20 UNEF .638 .374 1.969 .717 1.079 .126 1.126 1.272
16 .8750-20 UNEF .638 .374 2.362 .846 1.079 .126 1.126 1.272
18 1.0000-20 UNEF .756 .374 2.362 .907 1.213 .157 1.248 1.370
20 1.1875-18 UNEF .867 .374 2.362 .907 1.346 .157 1.374 1.488
22 1.1875-18 UNEF .965 .374 2.362 .907 1.472 .157 1.500 1.618
24 1.4375-18 UNEF 1.094 .374 2.560 .907 1.610 .157 1.626 1.756
28 1.4375-18 UNEF 1.228 .374 2.560 .947 1.839 .157 1.874 2.004
32 1.7500-18 UNS 1.488 .433 2.560 .947 2.102 .157 2.126 2.248
36 2.0000-18 UNS 1.780 .465 3.150 .947 2.346 .157 2.386 2.504
40 2.2500-16 UN 2.016 .465 3.150 .947 2.579 .157 2.618 2.756
Millimeters
Shell
Size
F
Min.
K
Min.
L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15
P
± 0.2
Q
± 0.2
S
Max.
10SL 10.4 9.5 50 18.2 18.2 2.8 20.6 25.2
14S 13.2 9.5 50 18.2 24.6 3.2 25.4 29.8
16S 16.2 9.5 50 18.2 27.4 3.2 28.6 32.3
16 16.2 9.5 60 21.5 27.4 3.2 28.6 32.3
18 19.2 9.5 60 23.0 30.8 4.0 31.7 34.8
20 22.0 9.5 60 23.0 34.2 4.0 34.9 37.8
22 24.5 9.5 60 23.0 37.4 4.0 38.1 41.1
24 27.8 9.5 65 23.0 40.9 4.0 41.3 44.6
28 31.2 9.5 65 24.1 46.7 4.0 47.6 50.9
32 37.8 11.0 65 24.1 53.4 4.0 54.0 57.1
36 45.2 11.8 80 24.1 59.6 4.0 60.6 63.6
40 51.2 11.8 80 24.1 65.5 4.0 66.5 70.0
N
MP
L
F
K
B
Q
S
22
38
GT01AF/01F
inline receptacle
All dimensions for reference only.
Inches
Shell
Size
L
Max.
M
+ .016
– .000
N
+ .000
– .006
P
± .008
Q
± .008
S
Max.
Z
Nominal
KK
Max.
LL
Max.
10SL 2.362 .717 .717 .110 .811 .992 .220 .894 4.720
14S 2.440 .717 .969 .126 1.000 1.173 .312 1.083 4.720
16S 2.756 .717 1.079 .126 1.126 1.272 .437 1.181 4.720
16 2.756 .846 1.079 .126 1.126 1.272 .437 1.181 4.921
18 3.031 .907 1.213 .157 1.248 1.370 .562 1.300 4.921
20 3.031 .907 1.346 .157 1.374 1.488 .625 1.476 4.921
22 3.031 .907 1.472 .157 1.500 1.618 .625 1.476 4.921
24 3.346 .907 1.610 .157 1.626 1.756 .750 1.705 4.921
28 3.346 .947 1.839 .157 1.874 2.004 .750 1.705 4.921
32 3.346 .947 2.102 .157 2.126 2.248 .937 2.035 4.921
36 4.134 .947 2.346 .157 2.386 2.504 1.250 2.283 5.315
40 5.118 .947 2.579 .157 2.618 2.756 1.375 2.579 5.709
Millimeters
Shell
Size
L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15
P
± 0.2
Q
± 0.2
S
Max.
Z
Nominal
KK
Max.
LL
Max.
10SL 60 18.2 18.2 2.8 20.6 25.2 5.58 22.7 120
14S 62 18.2 24.6 3.2 25.4 29.8 7.92 27.5 120
16S 70 18.2 27.4 3.2 28.6 32.3 11.09 30.0 120
16 70 21.5 27.4 3.2 28.6 32.3 11.09 30.0 125
18 77 23.0 30.8 4.0 31.7 34.8 14.27 33.0 125
20 77 23.0 34.2 4.0 34.9 37.8 15.87 37.5 125
22 77 23.0 37.4 4.0 38.1 41.1 15.87 37.5 125
24 85 23.0 40.9 4.0 41.3 44.6 19.05 43.3 125
28 85 24.1 46.7 4.0 47.6 50.9 19.05 43.3 125
32 85 24.1 53.4 4.0 54.0 57.1 23.79 51.7 125
36 105 24.1 59.6 4.0 60.6 63.6 31.75 58.0 135
40 130 24.1 65.5 4.0 66.5 70.0 34.92 65.5 145
GT01AF
• With cable clamp
• Wire sealing grommet not included
• Non-environment proof
GT01F
• With wire sealing grommet and cable clamp
• For use with individual wires
• Environment proof
Q
S
N
L
MP
Z
KK
LL
23
39
GT01G
inline receptacle
• Includes wire sealing grommet
• For use with heat-shrink tubing
• Environment proof
All dimensions for reference only.
Inches
Shell
Size
J
± .008
K
± .020
L
Max.
M
+ .016
– .000
N
+ .000
– .006
P
± .008
Q
± .008
S
Max.
Z
Min.
BB
Max.
JJ
± .008
KK
± .008
10SL .138 .461 1.969 .717 .717 .110 .811 .992 .303 .524 .610 .669
14S .138 .461 1.969 .717 .969 .126 1.000 1.173 .417 .669 .752 .791
16S .138 .461 1.969 .717 1.079 .126 1.126 1.272 .531 .862 .941 .925
16 .138 .453 2.362 .846 1.079 .126 1.126 1.272 .531 .862 .941 .925
18 .138 .453 2.362 .907 1.213 .157 1.248 1.370 .575 .862 .941 1.043
20 .138 .500 2.559 .907 1.346 .157 1.374 1.488 .736 1.031 1.165 1.189
22 .138 .500 2.559 .907 1.472 .157 1.500 1.618 .819 1.031 1.165 1.323
24 .138 .500 2.559 .907 1.610 .157 1.626 1.756 .969 1.358 1.488 1.421
28 .138 .500 2.559 .947 1.839 .157 1.874 2.004 1.063 1.358 1.488 1.630
32 .138 .598 2.756 .947 2.102 .157 2.126 2.248 1.311 1.717 1.882 1.913
36 .138 .598 3.150 .947 2.346 .157 2.386 2.504 1.516 1.717 1.882 2.157
40 .138 .610 3.150 .947 2.579 1.57 2.618 2.756 1.898 2.071 2.276 2.402
Millimeters
Shell
Size
J
± 0.2
K
± 0.5
L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15
P
± 0.2
Q
± 0.2
S
Max.
Z
Min.
B
Max.
JJ
± 0.2
KK
± 0.2
10SL 3.5 11.7 50 18.2 18.2 2.8 20.6 25.2 7.7 13.3 15.5 17.0
14S 3.5 11.7 50 18.2 24.6 3.2 25.4 29.8 10.6 17.0 19.1 20.1
16S 3.5 11.7 50 18.2 27.4 3.2 28.6 32.3 13.5 21.9 23.9 23.5
16 3.5 11.5 60 21.5 27.4 3.2 28.6 32.3 13.5 21.9 23.9 23.5
18 3.5 11.5 60 23.0 30.8 4.0 31.7 34.8 14.6 21.9 23.9 26.5
20 3.5 12.7 65 23.0 34.2 4.0 34.9 37.8 18.7 26.2 29.6 30.2
22 3.5 12.7 65 23.0 37.4 4.0 38.1 41.1 20.8 26.2 29.6 33.6
24 3.5 12.7 65 23.0 40.9 4.0 41.3 44.6 24.6 34.5 37.8 36.1
28 3.5 12.7 65 24.1 46.7 4.0 47.6 50.9 27.0 34.5 37.8 41.4
32 3.5 15.2 70 24.1 53.4 4.0 54.0 57.1 33.3 43.6 47.8 48.6
36 3.5 15.2 80 24.1 59.6 4.0 60.6 63.6 38.5 43.6 47.8 54.8
40 3.5 15.5 80 24.1 65.5 4.0 66.5 70.0 48.2 52.6 57.8 61.0
Q
S
N
L
MP
KKJJBBZ
J
K
24
41
GT01R
inline receptacle
• With individual wire sealing grommet
• Includes backshell for conduit termination
• Environment proof
All dimensions for reference only.
Inches
Shell
Size
B
Thread
Class 2A
F
Min.
K
Min.
L
Max.
M
+ .016
– .000
N
+ .000
– .006
P
± .008
Q
± .008
S
Max.
10SL .6250-24 UNEF .409 .374 1.969 .717 .717 .110 .811 .992
14S .7500-20 UNEF .520 .374 1.969 .717 .969 .126 1.000 1.173
16S .8750-20 UNEF .638 .374 1.969 .717 1.079 .126 1.126 1.272
16 .8750-20 UNEF .638 .374 2.362 .846 1.079 .126 1.126 1.272
18 1.0000-20 UNEF .756 .374 2.362 .907 1.213 .157 1.248 1.370
20 1.1875-18 UNEF .867 .374 2.362 .907 1.346 .157 1.374 1.488
22 1.1875-18 UNEF .965 .374 2.362 .907 1.472 .157 1.500 1.618
24 1.4375-18 UNEF 1.094 .374 2.560 .907 1.610 .157 1.626 1.756
28 1.4375-18 UNEF 1.228 .374 2.560 .947 1.839 .157 1.874 2.004
32 1.7500-18 UNS 1.488 .433 2.560 .947 2.102 .157 2.126 2.248
36 2.0000-18 UNS 1.780 .465 3.150 .947 2.346 .157 2.386 2.504
40 2.2500-16 UN 2.016 .465 3.150 .947 2.579 .157 2.618 2.756
Millimeters
Shell
Size
F
Min.
K
Min.
L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15
P
± 0.2
Q
± 0.2
S
Max.
10SL 10.4 9.5 50 18.2 18.2 2.8 20.6 25.2
14S 13.2 9.5 50 18.2 24.6 3.2 25.4 29.8
16S 16.2 9.5 50 18.2 27.4 3.2 28.6 32.3
16 16.2 9.5 60 21.5 27.4 3.2 28.6 32.3
18 19.2 9.5 60 23.0 30.8 4.0 31.7 34.8
20 22.0 9.5 60 23.0 34.2 4.0 34.9 37.8
22 24.5 9.5 60 23.0 37.4 4.0 38.1 41.1
24 27.8 9.5 65 23.0 40.9 4.0 41.3 44.6
28 31.2 9.5 65 24.1 46.7 4.0 47.6 50.9
32 37.8 11.0 65 24.1 53.4 4.0 54.0 57.1
36 45.2 11.8 80 24.1 59.6 4.0 60.6 63.6
40 51.2 11.8 80 24.1 65.5 4.0 66.5 70.0
N
MP
L
F
K
B
Q
S
25
42
GT01RV
inline receptacle
• Includes wire sealing grommet
• For use with individual wires
• Environment proof
All dimensions for reference only.
Inches
Shell
Size
L
Max.
M
+ .016
– .000
N
+ .000
– .006
P
± .008
Q
± .008
S
Max.
KK
Max.
10SL 1.890 .717 .717 .110 .811 .992 .787
14S 1.890 .717 .969 .126 1.000 1.173 .945
16S 1.890 .717 1.079 .126 1.126 1.272 1.024
16 2.205 .846 1.079 .126 1.126 1.272 1.024
18 2.244 .907 1.213 .157 1.248 1.370 1.161
20 2.244 .907 1.346 .157 1.374 1.488 1.299
22 2.244 .907 1.472 .157 1.500 1.618 1.417
24 2.244 .907 1.610 .157 1.626 1.756 1.575
28 2.244 .947 1.839 .157 1.874 2.004 1.811
32 2.362 .947 2.102 .157 2.126 2.248 2.028
36 2.362 .947 2.346 .157 2.386 2.504 2.283
40 2.362 .947 2.579 .157 2.618 2.756 2.539
Millimeters
Shell
Size
L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15
P
± 0.2
Q
± 0.2
S
Max.
KK
Max.
10SL 48.0 18.2 18.2 2.8 20.6 25.2 20.0
14S 48.0 18.2 24.6 3.2 25.4 29.8 24.0
16S 48.0 18.2 27.4 3.2 28.6 32.3 26.0
16 56.0 21.5 27.4 3.2 28.6 32.3 26.0
18 57.0 23.0 30.8 4.0 31.7 34.8 29.5
20 57.0 23.0 34.2 4.0 34.9 37.8 33.0
22 57.0 23.0 37.4 4.0 38.1 41.1 36.0
24 57.0 23.0 40.9 4.0 41.3 44.6 40.0
28 57.0 24.1 46.7 4.0 47.6 50.9 46.0
32 60.0 24.1 53.4 4.0 54.0 57.1 51.5
36 60.0 24.1 59.6 4.0 60.6 63.6 58.0
40 60.0 24.1 65.5 4.0 66.5 70.0 64.5
Q
S
N
MP
L
KK
26
43
R
RS
S
T
N
MP
KK
L
82º
T
GT02R/02RFS
box mount receptacle for front panel mounting
All dimensions for reference only.
Inches
Shell
Size
L
± .012
M
+ .016
– .000
N
+ .000
– .006
P
± .008
R
± .004
S
± .012
T
+ .004
– .000
KK
Max.
10SL 1.087 .717 .717 .110 .717 1.000 .126 .626
14S 1.087 .717 .969 .126 .906 1.181 .126 .756
16S 1.087 .717 1.079 .126 .969 1.280 .126 .882
16 1.331 .846 1.079 .126 .969 1.280 .126 .882
18 1.331 .907 1.213 .157 1.063 1.378 .126 1.008
20 1.331 .907 1.346 .157 1.157 1.496 .126 1.142
22 1.331 .907 1.472 .157 1.252 1.614 .126 1.268
24 1.331 .907 1.610 .157 1.374 1.752 .146 1.390
28 1.406 .947 1.839 .157 1.563 2.000 .146 1.630
32 1.469 .947 2.102 .157 1.752 2.244 .169 1.882
36 1.469 .947 2.346 .157 1.937 2.500 .169 2.063
40 1.469 .947 2.579 .157 2.185 2.752 .169 2.323
Shell
Size
L
± 0.3
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15
P
± 0.2
R
± 0.1
S
± 0.3
T
+ 0.1
– 0.0
KK
Max.
10SL 27.6 18.2 18.2 2.8 18.2 25.4 3.2 15.9
14S 27.6 18.2 24.6 3.2 23.0 30.0 3.2 19.2
16S 27.6 18.2 27.4 3.2 24.6 32.5 3.2 22.4
16 33.8 21.5 27.4 3.2 24.6 32.5 3.2 22.4
18 33.8 23.0 30.8 4.0 27.0 35.0 3.2 25.6
20 33.8 23.0 34.2 4.0 29.4 38.0 3.2 29.0
22 33.8 23.0 37.4 4.0 31.8 41.0 3.2 32.2
24 33.8 23.0 40.9 4.0 34.9 44.5 3.7 35.3
28 35.7 24.1 46.7 4.0 39.7 50.8 3.7 41.4
32 37.3 24.1 53.4 4.0 44.5 57.0 4.3 47.8
36 37.3 24.1 59.6 4.0 49.2 63.5 4.3 52.4
40 37.3 24.1 65.5 4.0 55.5 69.9 4.3 59.0
GT02R
• Environment proof when mounted with proper panel
sealing gasket (see page 79)
• For rear mounting information see page 85
GT02RFS
• Same as GT02R except mounting holes are countersunk to allow
mating of plugs with rubber covered coupling nuts
GT02RFS
Countersunk holes required
when mating with GT06CFGG,
page 55 and GT08CFGG,
page 73
GT02R
box mount receptacle for front panel mounting
(see page 80)
page 83
43
R
RS
S
T
N
MP
KK
L
82º
T
GT02R/02RFS
box mount receptacle for front panel mounting
All dimensions for reference only.
Inches
Shell
Size
L
± .012
M
+ .016
– .000
N
+ .000
– .006
P
± .008
R
± .004
S
± .012
T
+ .004
– .000
KK
Max.
10SL 1.087 .717 .717 .110 .717 1.000 .126 .626
14S 1.087 .717 .969 .126 .906 1.181 .126 .756
16S 1.087 .717 1.079 .126 .969 1.280 .126 .882
16 1.331 .846 1.079 .126 .969 1.280 .126 .882
18 1.331 .907 1.213 .157 1.063 1.378 .126 1.008
20 1.331 .907 1.346 .157 1.157 1.496 .126 1.142
22 1.331 .907 1.472 .157 1.252 1.614 .126 1.268
24 1.331 .907 1.610 .157 1.374 1.752 .146 1.390
28 1.406 .947 1.839 .157 1.563 2.000 .146 1.630
32 1.469 .947 2.102 .157 1.752 2.244 .169 1.882
36 1.469 .947 2.346 .157 1.937 2.500 .169 2.063
40 1.469 .947 2.579 .157 2.185 2.752 .169 2.323
Shell
Size
L
± 0.3
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15
P
± 0.2
R
± 0.1
S
± 0.3
T
+ 0.1
– 0.0
KK
Max.
10SL 27.6 18.2 18.2 2.8 18.2 25.4 3.2 15.9
14S 27.6 18.2 24.6 3.2 23.0 30.0 3.2 19.2
16S 27.6 18.2 27.4 3.2 24.6 32.5 3.2 22.4
16 33.8 21.5 27.4 3.2 24.6 32.5 3.2 22.4
18 33.8 23.0 30.8 4.0 27.0 35.0 3.2 25.6
20 33.8 23.0 34.2 4.0 29.4 38.0 3.2 29.0
22 33.8 23.0 37.4 4.0 31.8 41.0 3.2 32.2
24 33.8 23.0 40.9 4.0 34.9 44.5 3.7 35.3
28 35.7 24.1 46.7 4.0 39.7 50.8 3.7 41.4
32 37.3 24.1 53.4 4.0 44.5 57.0 4.3 47.8
36 37.3 24.1 59.6 4.0 49.2 63.5 4.3 52.4
40 37.3 24.1 65.5 4.0 55.5 69.9 4.3 59.0
GT02R
• Environment proof when mounted with proper panel
sealing gasket (see page 79)
• For rear mounting information see page 85
GT02RFS
• Same as GT02R except mounting holes are countersunk to allow
mating of plugs with rubber covered coupling nuts
GT02RFS
Countersunk holes required
when mating with GT06CFGG,
page 55 and GT08CFGG,
page 73
27
GT030
square ange receptacle for rear panel mounting
Table 1: Inches
Shell
Size
B
Thread
Class 2A
L
± .012
M
+ .016
– .000
N
+ .000
– .006
P
± .008
R
± .004
S
± .012
T
+ .004
– .000
10SL .6250-24UNEF 1.087 .717 .717 .110 .717 1.000 .126
14S .7500-20UNEF 1.087 .717 .969 .126 .906 1.181 .126
16S .8750-20UNEF 1.087 .717 1.079 .126 .969 1.280 .126
16 .8750-20UNEF 1.331 .846 1.079 .126 .969 1.280 .126
18 1.0000-20UNEF 1.331 .907 1.213 .157 1.063 1.378 .126
20 1.1250-18UNEF 1.331 .907 1.346 .157 1.157 1.496 .126
22 1.2500-18UNEF 1.331 .907 1.472 .157 1.252 1.614 .126
24 1.3750-18UNEF 1.406 .907 1.610 .157 1.374 1.752 .146
28 1.6250-18UNEF 1.406 .947 1.839 .157 1.563 2.000 .146
32 1.8750-16UN 1.469 .947 2.102 .157 1.752 2.244 .169
36 2.0625-16UN 1.469 .947 2.346 .157 1.937 2.500 .169
40 2.3125-16UN 1.469 .947 2.579 .157 2.185 2.752 .169
Table 2: Millimeters
Shell
Size
L
± 0.3
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15
P
± 0.2
R
± 0.1
S
± 0.3
T
+ 0.1
– 0.0
10SL 27.6 18.2 18.2 2.8 18.2 25.4 3.2
14S 27.6 18.2 24.6 3.2 23.0 30.0 3.2
16S 27.6 18.2 27.4 3.2 24.6 32.5 3.2
16 33.8 21.5 27.4 3.2 24.6 32.5 3.2
18 33.8 23.05 30.8 4.0 27.0 35.0 3.2
20 33.8 23.05 34.2 4.0 29.4 38.0 3.2
22 33.8 23.05 37.4 4.0 31.8 41.0 3.2
24 33.8 23.05 40.9 4.0 34.9 44.5 3.7
28 35.7 24.05 46.7 4.0 39.7 50.8 3.7
32 37.3 24.05 53.4 4.0 44.5 57.0 4.3
36 37.3 24.05 59.6 4.0 49.2 63.5 4.3
40 37.3 24.05 65.5 4.0 55.5 69.9 4.3
All dimensions for reference only.
• Four through mounting holes or optional threaded holes
• Threaded rear to accept accessory attachment
• Environment proof when mounted with a proper
sealing gasket (see page 80)
R
RS
S
T
N
M
RS N
P
B
L
28
46
GT030A
square flange receptacle for rear panel mounting
• Four through mounting holes or optional threaded holes
• Backshell included for accessory attachment
• Without a wire sealing grommet and cable clamp
• Non-environment proof
All dimensions for reference only.
Inches
Shell
Size
B
Thread
Class 2A
F
Min.
K
Min.
L
Max.
M
+ .016
– .000
N
+ .000
– .006
P
± .008
R
± .004
S
± .012
T
+ .004
– .000
10SL .6250-24 UNEF .409 .374 1.969 .717 .717 .110 .717 1.000 .126
14S .7500-20 UNEF .520 .374 1.969 .717 .969 .126 .906 1.181 .126
16S .8750-20 UNEF .638 .374 1.969 .717 1.079 .126 .969 1.280 .126
16 .8750-20 UNEF .638 .374 2.362 .846 1.079 .126 .969 1.280 .126
18 1.0000-20 UNEF .756 .374 2.362 .907 1.213 .157 1.063 1.378 .126
20 1.1875-18 UNEF .867 .374 2.362 .907 1.346 .157 1.157 1.496 .126
22 1.1875-18 UNEF .965 .374 2.362 .907 1.472 .157 1.252 1.614 .126
24 1.4375-18 UNEF 1.094 .374 2.560 .907 1.610 .157 1.374 1.752 .146
28 1.4375-18 UNEF 1.228 .374 2.560 .947 1.839 .157 1.563 2.000 .146
32 1.7500-18 UNS 1.488 .433 2.560 .947 2.102 .157 1.752 2.244 .169
36 2.0000-18 UNS 1.780 .465 3.150 .947 2.346 .157 1.937 2.500 .169
40 2.2500-16 UN 2.016 .465 3.150 .947 2.579 .157 2.185 2.752 .169
Millimeters
Shell
Size
F
Min.
K
Min.
L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15
P
± 0.2
R
± 0.1
S
± 0.3
T
+ 0.1
– 0.0
10SL 10.4 9.5 50 18.20 18.2 2.8 18.2 25.4 3.2
14S 13.2 9.5 50 18.20 24.6 3.2 23.0 30.0 3.2
16S 16.2 9.5 50 18.20 27.4 3.2 24.6 32.5 3.2
16 16.2 9.5 60 21.50 27.4 3.2 24.6 32.5 3.2
18 19.2 9.5 60 23.05 30.8 4.0 27.0 35.0 3.2
20 22.0 9.5 60 23.05 34.2 4.0 29.4 38.0 3.2
22 24.5 9.5 60 23.05 37.4 4.0 31.8 41.0 3.2
24 27.8 9.5 65 23.05 40.9 4.0 34.9 44.5 3.7
28 31.2 9.5 65 24.05 46.7 4.0 39.7 50.8 3.7
32 37.8 11.0 65 24.05 53.4 4.0 44.5 57.0 4.3
36 45.2 11.8 80 24.05 59.6 4.0 49.2 63.5 4.3
40 51.2 11.8 80 24.05 65.5 4.0 55.5 69.9 4.3
R
RS
S
T
NF
L
K
MP B
29
47
GT030AF/030F
square flange receptacle for rear panel mounting
All dimensions for reference only.
Inches
Shell
Size
L
Max.
M
+ .016
– .000
N
+ .000
– .006
P
± .008
R
± .004
S
± .012
T
+ .004
– .000
Z
Nominal
KK
Max.
LL
Max.
10SL 2.362 .717 .717 .110 .717 1.000 .126 .220 .894 4.720
14S 2.440 .717 .969 .126 .906 1.181 .126 .312 1.083 4.720
16S 2.756 .717 1.079 .126 .969 1.280 .126 .437 1.181 4.720
16 2.756 .846 1.079 .126 .969 1.280 .126 .437 1.181 4.921
18 3.031 .907 1.213 .157 1.063 1.378 .126 .562 1.300 4.921
20 3.031 .907 1.346 .157 1.157 1.496 .126 .625 1.476 4.921
22 3.031 .907 1.472 .157 1.252 1.614 .126 .625 1.476 4.921
24 3.346 .907 1.610 .157 1.374 1.752 .146 .750 1.705 4.921
28 3.346 .947 1.839 .157 1.563 2.000 .146 .750 1.705 4.921
32 3.346 .947 2.102 .157 1.752 2.244 .169 .937 2.035 4.921
36 4.134 .947 2.346 .157 1.937 2.500 .169 1.250 2.283 5.315
40 5.118 .947 2.579 .157 2.185 2.752 .169 1.375 2.579 5.709
Millimeters
Shell
Size
L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15
P
± 0.2
R
± 0.1
S
± 0.3
T
+ 0.1
– 0.0
Z
Nominal
KK
Max.
LL
Max.
10SL 60 18.20 18.2 2.8 18.2 25.4 3.2 5.58 22.7 120
14S 62 18.20 24.6 3.2 23.0 30.0 3.2 7.92 27.5 120
16S 70 18.20 27.4 3.2 24.6 32.5 3.2 11.09 30.0 120
16 70 21.50 27.4 3.2 24.6 32.5 3.2 11.09 30.0 125
18 77 23.05 30.8 4.0 27.0 35.0 3.2 14.27 33.0 125
20 77 23.05 34.2 4.0 29.4 38.0 3.2 15.87 37.5 125
22 77 23.05 37.4 4.0 31.8 41.0 3.2 15.87 37.5 125
24 85 23.05 40.9 4.0 34.9 44.5 3.7 19.05 43.3 125
28 85 24.05 46.7 4.0 39.7 50.8 3.7 19.05 43.3 125
32 85 24.05 53.4 4.0 44.5 57.0 4.3 23.79 51.7 125
36 105 24.05 59.6 4.0 49.2 63.5 4.3 31.75 58.0 135
40 130 24.05 65.5 4.0 55.5 69.9 4.3 34.92 65.5 145
GT030AF
• Includes a cable clamp
• Wire sealing grommet not included
• Non-environment proof
• Four through mounting holes or optional threaded holes
GT030F
• Includes a wire sealing grommet and cable clamp
• For use with individual wires
• Environment proof
• Four through mounting holes or optional threaded holes
R
RS
S
T
RSN
L
MP
ZKK
LL
30
48
GT030G
square flange receptacle for rear panel mounting
• Four through mounting holes or optional threaded holes
• With wire sealing grommet for individual wires
• Includes backshell for use with heat-shrink tubing
• Environment proof
All dimensions for reference only.
Inches
Shell
Size
J
± .008
K
± .020
L
Max.
M
+ .016
– .000
N
+ .000
– .006
P
± .008
R
± .004
S
± .012
T
+ .004
– .000
Z
Min.
BB
Max.
JJ
± .008
KK
± .008
10SL .138 .461 1.969 .717 .717 .110 .717 1.000 .126 .303 .524 .610 .669
14S .138 .461 1.969 .717 .969 .126 .906 1.181 .126 .417 .669 .752 .791
16S .138 .461 1.969 .717 1.079 .126 .969 1.280 .126 .531 .862 .941 .925
16 .138 .453 2.362 .846 1.079 .126 .969 1.280 .126 .531 .862 .941 .925
18 .138 .453 2.362 .907 1.213 .157 1.063 1.378 .126 .575 .862 .941 1.043
20 .138 .500 2.559 .907 1.346 .157 1.157 1.496 .126 .736 1.031 1.165 1.189
22 .138 .500 2.559 .907 1.472 .157 1.252 1.614 .126 .819 1.031 1.165 1.323
24 .138 .500 2.559 .907 1.610 .157 1.374 1.752 .146 .969 1.358 1.488 1.421
28 .138 .500 2.559 .947 1.839 .157 1.563 2.000 .146 1.063 1.358 1.488 1.630
32 .138 .598 2.756 .947 2.102 .157 1.752 2.244 .169 1.311 1.717 1.882 1.913
36 .138 .598 3.150 .947 2.346 .157 1.937 2.500 .169 1.516 1.717 1.882 2.157
40 .138 .610 3.150 .947 2.579 1.57 2.185 2.752 .169 1.898 2.071 2.276 2.402
Millimeters
Shell
Size
J
± 0.2
K
± 0.5
L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15
P
± 0.2
R
± 0.1
S
± 0.3
T
+ 0.1
– 0.0
Z
Min.
B
Max.
JJ
± 0.2
KK
± 0.2
10SL 3.5 11.7 50 18.20 18.2 2.8 18.2 25.4 3.2 7.7 13.3 15.5 17.0
14S 3.5 11.7 50 18.20 24.6 3.2 23.0 30.0 3.2 10.6 17.0 19.1 20.1
16S 3.5 11.7 50 18.20 27.4 3.2 24.6 32.5 3.2 13.5 21.9 23.9 23.5
16 3.5 11.5 60 21.50 27.4 3.2 24.6 32.5 3.2 13.5 21.9 23.9 23.5
18 3.5 11.5 60 23.05 30.8 4.0 27.0 35.0 3.2 14.6 21.9 23.9 26.5
20 3.5 12.7 65 23.05 34.2 4.0 29.4 38.0 3.2 18.7 26.2 29.6 30.2
22 3.5 12.7 65 23.05 37.4 4.0 31.8 41.0 3.2 20.8 26.2 29.6 33.6
24 3.5 12.7 65 23.05 40.9 4.0 34.9 44.5 3.7 24.6 34.5 37.8 36.1
28 3.5 12.7 65 24.05 46.7 4.0 39.7 50.8 3.7 27.0 34.5 37.8 41.4
32 3.5 15.2 70 24.05 53.4 4.0 44.5 57.0 4.3 33.3 43.6 47.8 48.6
36 3.5 15.2 80 24.05 59.6 4.0 49.2 63.5 4.3 38.5 43.6 47.8 54.8
40 3.5 15.5 80 24.05 65.5 4.0 55.5 69.9 4.3 48.2 52.6 57.8 61.0
R
RS
S
T
N
L
MP
KKJJBBZ
J
K
31
50
GT030R
square flange receptacle for rear panel mounting
• Four through mounting holes or optional threaded holes
• With a wire sealing grommet for individual wires
• Includes backshell for conduit termination
• Environment proof
All dimensions for reference only.
Inches
Shell
Size
B
Thread
Class 2A
F
Min.
K
Min.
L
Max.
M
+ .016
– .000
N
+ .000
– .006
P
± .008
R
± .004
S
± .012
T
+ .004
– .000
10SL .6250-24 UNEF .409 .374 1.969 .717 .717 .110 .717 1.000 .126
14S .7500-20 UNEF .520 .374 1.969 .717 .969 .126 .906 1.181 .126
16S .8750-20 UNEF .638 .374 1.969 .717 1.079 .126 .969 1.280 .126
16 .8750-20 UNEF .638 .374 2.362 .846 1.079 .126 .969 1.280 .126
18 1.0000-20 UNEF .756 .374 2.362 .907 1.213 .157 1.063 1.378 .126
20 1.1875-18 UNEF .867 .374 2.362 .907 1.346 .157 1.157 1.496 .126
22 1.1875-18 UNEF .965 .374 2.362 .907 1.472 .157 1.252 1.614 .126
24 1.4375-18 UNEF 1.094 .374 2.560 .907 1.610 .157 1.374 1.752 .146
28 1.4375-18 UNEF 1.228 .374 2.560 .947 1.839 .157 1.563 2.000 .146
32 1.7500-18 UNS 1.488 .433 2.560 .947 2.102 .157 1.752 2.244 .169
36 2.0000-18 UNS 1.780 .465 3.150 .947 2.346 .157 1.937 2.500 .169
40 2.2500-16 UN 2.016 .465 3.150 .947 2.579 .157 2.185 2.752 .169
Millimeters
Shell
Size
F
Min.
K
Min.
L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15
P
± 0.2
R
± 0.1
S
± 0.3
T
+ 0.1
– 0.0
10SL 10.4 9.5 50 18.20 18.2 2.8 18.2 25.4 3.2
14S 13.2 9.5 50 18.20 24.6 3.2 23.0 30.0 3.2
16S 16.2 9.5 50 18.20 27.4 3.2 24.6 32.5 3.2
16 16.2 9.5 60 21.50 27.4 3.2 24.6 32.5 3.2
18 19.2 9.5 60 23.05 30.8 4.0 27.0 35.0 3.2
20 22.0 9.5 60 23.05 34.2 4.0 29.4 38.0 3.2
22 24.5 9.5 60 23.05 37.4 4.0 31.8 41.0 3.2
24 27.8 9.5 65 23.05 40.9 4.0 34.9 44.5 3.7
28 31.2 9.5 65 24.05 46.7 4.0 39.7 50.8 3.7
32 37.8 11.0 65 24.05 53.4 4.0 44.5 57.0 4.3
36 45.2 11.8 80 24.05 59.6 4.0 49.2 63.5 4.3
40 51.2 11.8 80 24.05 65.5 4.0 55.5 69.9 4.3
R
RS
S
T
NF
L
K
MP B
32
51
GT030RV
square flange receptacle for rear panel mounting
• Four through mounting holes or optional threaded holes
• With wire sealing grommet for individual wires
• Environment proof
All dimensions for reference only.
Inches
Shell
Size
L
Max.
M
+ .016
– .000
N
+ .000
– .006
P
± .008
R
± .004
S
± .012
T
+ .004
– .000
KK
Max.
10SL 1.890 .717 .717 .110 .717 1.000 .126 .787
14S 1.890 .717 .969 .126 .906 1.181 .126 .945
16S 1.890 .717 1.079 .126 .969 1.280 .126 1.024
16 2.205 .846 1.079 .126 .969 1.280 .126 1.024
18 2.244 .907 1.213 .157 1.063 1.378 .126 1.161
20 2.244 .907 1.346 .157 1.157 1.496 .126 1.299
22 2.244 .907 1.472 .157 1.252 1.614 .126 1.417
24 2.244 .907 1.610 .157 1.374 1.752 .146 1.575
28 2.244 .947 1.839 .157 1.563 2.000 .146 1.811
32 2.362 .947 2.102 .157 1.752 2.244 .169 2.028
36 2.362 .947 2.346 .157 1.937 2.500 .169 2.283
40 2.362 .947 2.579 .157 2.185 2.752 .169 2.539
Millimeters
Shell
Size
L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15
P
± 0.2
R
± 0.1
S
± 0.3
T
+ 0.1
– 0.0
KK
Max.
10SL 48.0 18.20 18.2 2.8 18.2 25.4 3.2 20.0
14S 48.0 18.20 24.6 3.2 23.0 30.0 3.2 24.0
16S 48.0 18.20 27.4 3.2 24.6 32.5 3.2 26.0
16 56.0 21.50 27.4 3.2 24.6 32.5 3.2 26.0
18 57.0 23.05 30.8 4.0 27.0 35.0 3.2 29.5
20 57.0 23.05 34.2 4.0 29.4 38.0 3.2 33.0
22 57.0 23.05 37.4 4.0 31.8 41.0 3.2 36.0
24 57.0 23.05 40.9 4.0 34.9 44.5 3.7 40.0
28 57.0 24.05 46.7 4.0 39.7 50.8 3.7 46.0
32 60.0 24.05 53.4 4.0 44.5 57.0 4.3 51.5
36 60.0 24.05 59.6 4.0 49.2 63.5 4.3 58.0
40 60.0 24.05 65.5 4.0 55.5 69.9 4.3 64.5
R
RS
S
T
N
MP
L
KK
33
52
GT06A
straight plug
All dimensions for reference only.
Inches
Shell
Size
B
Thread
Class 2A
F
Min.
K
Min.
L
Max.
Q
Max.
10SL .6250-24UNEF .409 .374 1.969 .898
14S .7500-20UNEF .520 .374 1.969 1.150
16S .8750-20UNEF .638 .374 1.969 1.260
16 .8750-20UNEF .638 .374 2.362 1.260
18 1.0000-20UNEF .756 .374 2.362 1.437
20 1.1875-18UNEF .867 .374 2.362 1.571
22 1.1875-18UNEF .965 .374 2.362 1.697
24 1.4375-18UNEF 1.094 .374 2.560 1.835
28 1.4375-18UNEF 1.228 .374 2.560 2.102
32 1.7500-18UNS 1.488 .433 2.560 2.366
36 2.0000-18UNS 1.780 .465 3.150 2.610
40 2.2500-16UN 2.016 .465 3.150 2.850
Millimeters
Shell
Size
F
Min.
K
Min.
L
Max.
Q
Max.
10SL 10.4 9.5 50 22.8
14S 13.2 9.5 50 29.2
16S 16.2 9.5 50 32.0
16 16.2 9.5 60 32.0
18 19.2 9.5 60 36.5
20 22.0 9.5 60 39.9
22 24.5 9.5 60 43.1
24 27.8 9.5 65 46.6
28 31.2 9.5 65 53.4
32 37.8 11.0 65 60.1
36 45.2 11.8 80 66.3
40 51.2 11.8 80 72.4
• Without grommet and cable clamp
• If a cable clamp is required, see pages 82 and 84
• Non-environment proof
Q
B
F
K
L
• Without grommet and cable clamp
• If a cable clamp is required, see pages 84 and 86
• Non-environment
34
53
GT06AF/06F
straight plug
All dimensions for reference only.
Inches
Shell
Size
L
Max.
Q
Max.
Z
Nominal
KK
Max.
LL
Max.
10SL 2.165 .898 .220 .894 4.724
14S 2.362 1.150 .312 1.083 4.724
16S 2.756 1.260 .437 1.181 4.724
16 2.756 1.260 .437 1.181 4.921
18 2.953 1.437 .562 1.299 4.921
20 2.953 1.571 .625 1.476 4.921
22 2.953 1.697 .625 1.476 4.921
24 3.543 1.835 .750 1.705 4.921
28 3.543 2.102 .750 1.705 4.921
32 3.543 2.366 .937 2.035 4.921
36 3.937 2.610 1.250 2.283 5.315
40 4.921 2.850 1.375 2.579 5.709
Millimeters
Shell
Size
L
Max.
Q
Max.
Z
Nominal
KK
Max.
LL
Max.
10SL 55 22.8 5.58 22.7 120
14S 60 29.2 7.92 27.5 120
16S 70 32.0 11.09 30.0 120
16 70 32.0 11.09 30.0 125
18 75 36.5 14.27 33.0 125
20 75 39.9 15.87 37.5 125
22 75 43.1 15.87 37.5 125
24 90 46.6 19.05 43.3 125
28 90 53.4 19.05 43.3 125
32 90 60.1 23.79 51.7 125
36 100 66.3 31.75 58.0 135
40 125 72.4 34.92 65.5 145
GT06AF
• With a cable clamp
• Wire sealing grommet not supplied
• Non-environment proof
GT06F
• With a wire sealing grommet and cable clamp
• For use with individual wires
• Environment proof
Q
ZKK
L
LL
35
54
GT06CF
straight plug
All dimensions for reference only.
Inches
Shell
Size
J
Approx.
L
Approx.
Q
Max.
Z
Open Closed
10SL .551 2.752 .898 .312 .094
14S .732 2.898 1.150 .438 .230
16S .732 2.898 1.260 .531 .315
16 .653 3.216 1.260 .531 .315
18 .705 3.307 1.437 .625 .378
20 .705 3.311 1.571 .748 .445
22 .744 3.350 1.697 .748 .445
24 .689 3.484 1.835 .937 .610
28 .921 3.736 2.102 .937 .610
32 1.016 4.142 2.366 1.250 .921
36 1.031 4.390 2.610 1.378 .921
40 1.614 4.640 2.854 1.624 1.177
Millimeters
Shell
Size
J
Approx.
L
Approx.
Q
Max.
Z
Open Closed
10SL 14.0 69.6 22.8 7.93 2.38
14S 18.6 73.6 29.2 11.12 5.84
16S 18.6 73.6 32.0 13.48 8.00
16 16.6 81.7 32.0 13.48 8.00
18 17.9 84.0 36.5 15.87 9.60
20 17.9 84.1 39.9 19.00 11.30
22 18.9 85.1 43.1 19.00 11.30
24 17.5 88.5 46.6 23.80 15.50
28 23.4 94.9 53.4 23.80 15.50
32 25.8 105.2 60.1 31.75 23.40
36 26.2 111.5 66.3 35.00 23.40
40 41.0 111.5 72.5 41.25 29.90
• With a cable clamp and seal
• For use with jacketed cable
• Environment proof
Q
Z
J
Cable jacket
Strip length
L
OPEN
CLOSED
36
56
GT06G
straight plug
• With a wire sealing grommet
• For use with individual wires
• Includes a backshell for use with heat-shrink tubing
• Environment proof
All dimensions for reference only.
Inches
Shell
Size
J
± .008
K
± .020
L
Max.
Q
Max.
Z
Min.
BB
Max.
JJ
± .008
KK
± .008
10SL .138 .461 1.969 .898 .303 .524 .610 .669
14S .138 .461 1.969 1.150 .417 .669 .752 .791
16S .138 .461 1.969 1.260 .531 .862 .941 .925
16 .138 .453 2.362 1.260 .531 .862 .941 .925
18 .138 .453 2.362 1.437 .575 .862 .941 1.043
20 .138 .500 2.559 1.571 .736 1.031 1.165 1.189
22 .138 .500 2.559 1.697 .819 1.031 1.165 1.323
24 .138 .500 2.559 1.835 .969 1.358 1.488 1.421
28 .138 .500 2.559 2.102 1.063 1.358 1.488 1.630
32 .138 .598 2.756 2.366 1.311 1.717 1.882 1.913
36 .138 .598 3.150 2.610 1.516 1.717 1.882 2.157
40 .138 .610 3.150 2.854 1.898 2.071 2.276 2.402
Millimeters
Shell
Size
J
± 0.2
K
± 0.5
L
Max.
Q
Max.
Z
Min.
BB
Max.
JJ
± 0.2
KK
± 0.2
10SL 3.5 11.7 50 22.8 7.7 13.3 15.5 17.0
14S 3.5 11.7 50 29.2 10.6 17.0 19.1 20.1
16S 3.5 11.7 50 32.0 13.5 21.9 23.9 23.5
16 3.5 11.5 60 32.0 13.5 21.9 23.9 23.5
18 3.5 11.5 60 36.5 14.6 21.9 23.9 26.5
20 3.5 12.7 65 39.9 18.7 26.2 29.6 30.2
22 3.5 12.7 65 43.1 20.8 26.2 29.6 33.6
24 3.5 12.7 65 46.6 24.6 34.5 37.8 36.1
28 3.5 12.7 65 53.4 27.0 34.5 37.8 41.4
32 3.5 15.2 70 60.1 33.3 43.6 47.8 48.6
36 3.5 15.2 80 66.3 38.5 43.6 47.8 54.8
40 3.5 15.2 80 72.5 48.2 52.6 57.8 61.0
Q
BB JJ KKZ
J
K
L
37
GT06AMI/GT06RMI
straight plug
• Long adapter with internal PG/Metric thread*
• Wire sealing grommet not supplied
• Non-environmental
Inches
Shell
Size
L
Ref.
Q
Max.
10SL 2.873 .898
14S 2.904 1.150
16S 2.904 1.299
16 3.291 1.299
18 3.406 1.437
20 3.391 1.571
22 3.395 1.697
24 3.470 1.835
28 3.604 2.102
32 3.751 2.366
36 3.795 2.610
40 3.795 2.850
Millimeters
Shell
Size
L
Ref.
Q
Max.
10SL 73.0 22.8
14S 73.8 29.2
16S 73.8 32.0
16 83.6 32.0
18 86.5 36.5
20 86.1 39.9
22 86.2 43.1
24 88.1 46.6
28 91.5 53.4
32 95.3 60.1
36 96.4 66.3
40 96.4 72.5
All dimensions for reference only.
*Refer to page 87
QL
PG THREAD
• Long adapter with internal PG/Metric thread*
• With wire sealing grommet
• Environment proof
RMIAMI
PG/METRIC
THREAD
38
64
GT06R
straight plug
• With a wire sealing grommet
• Includes a backshell for conduit termination
• Environment proof
All dimensions for reference only.
Inches
Shell
Size
B
Thread
Class 2A
F
Min.
K
Min.
L
Max.
Q
Max.
10SL .6250-24UNEF .409 .374 1.969 .898
14S .7500-20UNEF .520 .374 1.969 1.150
16S .8750-20UNEF .638 .374 1.969 1.260
16 .8750-20UNEF .638 .374 2.362 1.260
18 1.0000-20UNEF .756 .374 2.362 1.437
20 1.1875-18UNEF .867 .374 2.362 1.571
22 1.1875-18UNEF .965 .374 2.362 1.697
24 1.4375-18UNEF 1.094 .374 2.560 1.835
28 1.4375-18UNEF 1.228 .374 2.560 2.102
32 1.7500-18UNS 1.488 .433 2.560 2.366
36 2.0000-18UNS 1.780 .465 3.150 2.610
40 2.2500-16UN 2.016 .465 3.150 2.850
Millimeters
Shell
Size
F
Min.
K
Min.
L
Max.
Q
Max.
10SL 10.4 9.5 50 22.8
14S 13.2 9.5 50 29.2
16S 16.2 9.5 50 32.0
16 16.2 9.5 60 32.0
18 19.2 9.5 60 36.5
20 22.0 9.5 60 39.9
22 24.5 9.5 60 43.1
24 27.8 9.5 65 46.6
28 31.2 9.5 65 53.4
32 37.8 11.0 65 60.1
36 45.2 11.8 80 66.3
40 51.2 11.8 80 72.4
Q
B
F
K
L
39
65
GT06RV
straight plug
All dimensions for reference only.
Inches
Shell
Size
L
Max.
Q
Max.
KK
Max.
10SL 1.417 .898 .787
14S 1.437 1.150 .945
16S 1.437 1.260 1.024
16 1.929 1.260 1.024
18 1.929 1.437 1.161
20 1.969 1.571 1.299
22 1.969 1.697 1.417
24 2.008 1.835 1.543
28 2.008 2.102 1.811
32 2.087 2.366 2.028
36 2.106 2.610 2.283
40 2.126 2.850 2.539
Millimeters
Shell
Size
L
Max.
Q
Max.
KK
Max.
10SL 36.0 22.8 20.0
14S 36.5 29.2 24.0
16S 36.5 32.0 26.0
16 49.0 32.0 26.0
18 49.0 36.5 29.5
20 50.0 39.9 33.0
22 50.0 43.1 36.0
24 51.0 46.6 40.0
28 51.0 53.4 46.0
32 53.0 60.1 51.5
36 53.5 66.3 58.0
40 54.0 72.4 64.5
• With a wire sealing grommet
• For use with individual wires
• Environment proof
KK
Q L
40
66
GT06SB
straight plug
• For termination of shielded braid and heatshrink tube or boot.
• With individual wire sealing grommet
• Environment proof
All dimensions for reference only.
Inches
Shell
Size
C
Min.
D
Max.
E
Max.
F
Ref.
L
Ref.
Q
Max.
R
Max.
10SL .303 .641 .775 .625 2.034 .898 .786
14S .417 .786 .873 .750 2.049 1.150 .944
16S .531 .905 1.025 .875 2.049 1.299 1.023
16 .531 .905 1.025 .875 2.505 1.299 1.023
18 .637 .965 1.147 1.000 2.552 1.437 1.160
20 .736 1.122 1.305 1.125 2.552 1.571 1.296
22 .819 1.196 1.373 1.250 2.418 1.697 1.416
24 .981 1.364 1.521 1.375 2.632 1.835 1.562
28 1.067 1.476 1.657 1.500 2.566 2.102 1.806
32 1.311 1.732 1.927 1.750 2.628 2.366 2.027
36 1.631 2.007 2.207 2.062 2.676 2.610 2.281
40 1.882 2.283 2.486 2.312 2.628 2.850 2.538
Millimeters
Shell
Size
C
Min.
D
Max.
E
Max.
F
Ref.
L
Ref.
Q
Max.
R
Max.
10SL 7.7 16.3 19.7 15.9 51.7 22.8 20.0
14S 10.6 20.0 22.2 19.1 52.0 29.2 24.0
16S 13.5 23.0 26.0 22.2 52.0 32.0 26.0
16 13.5 23.0 26.0 22.2 63.6 32.0 26.0
18 16.2 24.5 29.1 25.4 64.8 36.5 29.5
20 18.7 28.5 33.1 28.6 64.8 39.9 32.9
22 20.8 30.4 34.9 31.8 61.4 43.1 36.0
24 24.9 34.6 38.6 34.9 66.8 46.6 39.7
28 27.1 37.5 42.5 38.1 65.2 53.4 45.9
32 33.3 44.0 48.9 44.5 66.8 60.1 51.5
36 41.4 51.0 56.1 52.4 68.0 66.3 57.9
40 47.8 58.0 63.1 58.7 66.8 72.5 64.5
Q
ER
D
C
L
F
.138 REF
41
69
GT07R
jam nut receptacle
• For rear panel single hole mounting
• Panel seal O-ring included
• Environment proof
All dimensions for reference only.
Inches
Shell
Size
B
Thread
Class 2A
G
± .012
J
Wall Thickness M
± .012
N
+ .000
– .006
P
± .007
R
± .016
S
± .012Min. Max.
10SL .8750-20 UNEF .441 .094 .205 .965 .717 .157 1.062 1.252
14S 1.1250-18 UNEF .575 .094 .295 1.055 .969 .189 1.312 1.626
16S 1.2500-18 UNEF .618 .094 .295 1.055 1.079 .189 1.500 1.748
16 1.2500-18 UNEF .618 .094 .295 1.264 1.079 .189 1.500 1.748
18 1.3750-18 UNEF .661 .094 .354 1.327 1.213 .189 1.562 1.875
20 1.5000-18 UNEF .709 .094 .358 1.327 1.346 .189 1.750 2.000
22 1.6250-18 UNEF .795 .094 .358 1.327 1.472 .189 2.000 2.134
24 1.7500-18 UNEF .795 .094 .358 1.327 1.610 .189 2.000 2.252
28 2.0000-18 UNS .886 .094 .394 1.386 1.839 .220 2.188 2.500
32 2.2500-16 UN .972 .094 .394 1.386 2.102 .220 2.438 2.748
36 2.5000-16 UN 1.059 .094 .327 1.386 2.346 .220 2.812 3.000
40 2.7500-16 UN 1.165 .094 .327 1.386 2.579 .220 2.953 3.248
Millimeters
Shell
Size
G
± 0.3
J
Wall Thickness M
± 0.3
N
+ 0.00
– 0.15
P
± 0.2
R
± 0.4
S
± 0.3Min. Max.
10SL 11.2 2.4 5.2 24.5 18.2 4.0 27 31.8
14S 14.6 2.4 7.5 26.8 24.6 4.8 33 41.3
16S 15.7 2.4 7.5 26.8 27.4 4.8 38 44.4
16 15.7 2.4 7.5 32.1 27.4 4.8 38 44.4
18 16.8 2.4 9.0 33.7 30.8 4.8 40 47.6
20 18.0 2.4 9.1 33.7 34.2 4.8 44 50.8
22 20.2 2.4 9.1 33.7 37.4 4.8 51 54.2
24 20.2 2.4 9.1 33.7 40.9 4.8 51 57.2
28 22.5 2.4 10.0 35.2 46.7 5.6 56 63.5
32 24.7 2.4 10.0 35.2 53.4 5.6 62 69.8
36 26.9 2.4 8.3 35.2 59.6 5.6 71 76.2
40 29.6 2.4 8.3 35.2 65.5 5.6 75 82.5
G
S
S
G
R
N
M
P
BO-Ring
J
42
70
GT070
jam nut receptacle
• For rear panel single hole mounting
• Threaded rear for accessories
• Environment proof
All dimensions for reference only.
Inches
Shell
Size
B
Thread
Class 2A
G
± .012
J
Wall Thickness L
± .010
M
± .012
N
+ .000
– .006
P
± .007
R
± .016
S
± .012
BB
Thread
Class 2AMin. Max.
10SL .8750-20 UNEF .441 .094 .205 1.425 .965 .717 .157 1.062 1.252 .6250-24 UNEF
14S 1.1250-18 UNEF .575 .094 .295 1.531 1.055 .969 .189 1.312 1.626 .7500-20 UNEF
16S 1.2500-18 UNEF .618 .094 .295 1.531 1.055 1.079 .189 1.500 1.748 .8750-20 UNEF
16 1.2500-18 UNEF .618 .094 .295 1.909 1.264 1.079 .189 1.500 1.748 .8750-20 UNEF
18 1.3750-18 UNEF .661 .094 .354 1.941 1.327 1.213 .189 1.562 1.875 1.0000-20 UNEF
20 1.5000-18 UNEF .709 .094 .358 1.941 1.327 1.346 .189 1.750 2.000 1.1250-18 UNEF
22 1.6250-18 UNEF .795 .094 .358 1.941 1.327 1.472 .189 2.000 2.134 1.2500-18 UNEF
24 1.7500-18 UNEF .795 .094 .358 1.953 1.327 1.610 .189 2.000 2.252 1.3750-18 UNEF
28 2.0000-18 UNS .886 .094 .394 2.043 1.386 1.839 .220 2.188 2.500 1.6250-18 UNEF
32 2.2500-16 UN .972 .094 .394 2.043 1.386 2.102 .220 2.438 2.748 1.8750-16 UN
36 2.5000-16 UN 1.059 .094 .327 2.043 1.386 2.346 .220 2.812 3.000 2.0625-16 UN
40 2.7500-16 UN 1.165 .094 .327 2.043 1.386 2.579 .220 2.953 3.248 2.3125-16 UN
Millimeters
Shell
Size
G
± 0.3
J
Wall Thickness L
± 0.3
M
± 0.3
N
+ 0.00
– 0.15
P
± 0.2
R
± 0.4
S
± 0.3Min. Max.
10SL 11.2 2.4 5.2 36.2 24.5 18.2 4.0 27 31.8
14S 14.6 2.4 7.5 38.9 26.8 24.6 4.8 33 41.3
16S 15.7 2.4 7.5 38.9 26.8 27.4 4.8 38 44.4
16 15.7 2.4 7.5 48.5 32.1 27.4 4.8 38 44.4
18 16.8 2.4 9.0 49.3 33.7 30.8 4.8 40 47.6
20 18.0 2.4 9.1 49.3 33.7 34.2 4.8 44 50.8
22 20.2 2.4 9.1 49.3 33.7 37.4 4.8 51 54.2
24 20.2 2.4 9.1 49.6 33.7 40.9 4.8 51 57.2
28 22.5 2.4 10.0 51.9 35.2 46.7 5.6 56 63.5
32 24.7 2.4 10.0 51.9 35.2 53.4 5.6 62 69.8
36 26.9 2.4 8.3 51.9 35.2 59.6 5.6 71 76.2
40 29.6 2.4 8.3 51.9 35.2 65.5 5.6 75 82.5
N
M
P
BO-Ring
BB
L
J
G
S
S
G
R
43
71
GT08A
90° angle plug
All dimensions for reference only.
Inches
Shell
Size
B
Thread
Class 2A
F
Max.
J
Min.
K
Max.
L
Max.
Q
Max.
10SL .6250-24UNEF .337 .370 1.181 1.772 .898
14S .7500-20UNEF .462 .370 1.181 1.850 1.150
16S .8750-20UNEF .587 .370 1.181 1.890 1.299
16 .8750-20UNEF .587 .370 1.181 2.244 1.299
18 1.0000-20UNEF .685 .370 1.378 2.283 1.437
20 1.1875-18UNEF .810 .370 1.378 2.402 1.571
22 1.1875-18UNEF .915 .370 1.378 2.402 1.697
24 1.4375-18UNEF 1.025 .370 1.575 2.598 1.835
28 1.4375-18UNEF 1.139 .370 1.575 2.598 2.102
32 1.7500-18UNS 1.447 .433 1.772 2.835 2.366
36 2.0000-18UNS 1.687 .496 1.969 2.953 2.610
40 2.2500-16UN 1.923 .496 2.165 3.071 2.850
Millimeters
Shell
Size
F
Max.
J
Min.
K
Max.
L
Max.
Q
Max.
10SL 8.5 9.4 30 45 22.8
14S 11.7 9.4 30 47 29.2
16S 14.9 9.4 30 48 33.0
16 14.9 9.4 30 57 33.0
18 17.4 9.4 35 58 36.5
20 20.5 9.4 35 61 39.9
22 23.2 9.4 35 61 43.1
24 26.0 9.4 40 66 46.6
28 28.9 9.4 40 66 53.4
32 36.7 11.0 45 72 60.1
36 42.8 12.6 50 75 66.3
40 48.8 12.6 55 78 72.4
• Without a wire sealing grommet or clamp
• Non-environment proof
• If a cable clamp is required, see pages 82 and 84
Q
K
J
L
F
B
• Without a wire sealing grommet or clamp
• Non-environment proof
• If a cable clamp is required, see pages 84 and 86
44
72
GT08AF/08F
90° angle plug
GT08F
• With a wire sealing grommet and cable clamp
• For use with individual wires
• Environment proof
GT08AF
• With a cable clamp
• Wire sealing grommet not included
• Non-environment proof
All dimensions for reference only.
Inches
Shell
Size
K
Max.
L
Max.
Q
Max.
Z
Max.
KK
Max.
LL
Max.
10SL 1.654 1.772 .898 .220 .894 3.937
14S 1.654 1.850 1.150 .312 1.083 3.937
16S 1.772 1.890 1.299 .437 1.181 3.937
16 1.772 2.244 1.299 .437 1.181 3.937
18 2.087 2.283 1.437 .562 1.299 3.937
20 2.087 2.402 1.571 .625 1.476 3.937
22 2.087 2.402 1.697 .625 1.476 3.937
24 2.283 2.598 1.835 .750 1.705 3.937
28 2.283 2.598 2.102 .750 1.705 3.937
32 2.598 2.835 2.366 .937 2.061 4.331
36 2.717 2.953 2.610 1.250 2.283 4.331
40 3.740 3.071 2.850 1.375 2.579 5.512
Millimeters
Shell
Size
K
Max.
L
Max.
Q
Max.
Z
Max.
KK
Max.
LL
Max.
10SL 42 45 22.8 5.58 22.7 100
14S 42 47 29.2 7.92 27.5 100
16S 45 48 33.0 11.09 30.0 100
16 45 57 33.0 11.09 30.0 100
18 53 58 36.5 14.27 33.0 100
20 53 61 39.9 15.87 37.5 100
22 53 61 43.1 15.87 37.5 100
24 58 66 46.6 19.05 43.3 100
28 58 66 53.4 19.05 43.3 100
32 66 72 60.1 23.79 51.7 110
36 69 75 66.3 31.75 58.0 110
40 95 78 72.4 34.92 65.5 140
Q
L
ZKK
K
LL
45
76
GT08R
90° angle plug
All dimensions for reference only.
Inches
Shell
Size
B
Thread
Class 2A
F
Max.
J
Min.
K
Max.
L
Max.
Q
Max.
10SL .6250-24UNEF .337 .370 1.181 1.772 .898
14S .7500-20UNEF .462 .370 1.181 1.850 1.150
16S .8750-20UNEF .587 .370 1.181 1.890 1.299
16 .8750-20UNEF .587 .370 1.181 2.244 1.299
18 1.0000-20UNEF .685 .370 1.378 2.283 1.437
20 1.1875-18UNEF .810 .370 1.378 2.402 1.571
22 1.1875-18UNEF .915 .370 1.378 2.402 1.697
24 1.4375-18UNEF 1.025 .370 1.575 2.598 1.835
28 1.4375-18UNEF 1.139 .370 1.575 2.598 2.102
32 1.7500-18UNS 1.447 .433 1.772 2.835 2.366
36 2.0000-18UNS 1.687 .496 1.969 2.953 2.610
40 2.2500-16UN 1.923 .496 2.165 3.071 2.850
Millimeters
Shell
Size
F
Max.
J
Min.
K
Max.
L
Max.
Q
Max.
10SL 8.5 9.4 30 45 22.8
14S 11.7 9.4 30 47 29.2
16S 14.9 9.4 30 48 33.0
16 14.9 9.4 30 57 33.0
18 17.4 9.4 35 58 36.5
20 20.5 9.4 35 61 39.9
22 23.2 9.4 35 61 43.1
24 26.0 9.4 40 66 46.6
28 28.9 9.4 40 66 53.4
32 36.7 11.0 45 72 60.1
36 42.8 12.6 50 75 66.3
40 48.8 12.6 55 78 72.4
• With a wire sealing grommet for conduit termination
• For use with individual wires
• Environment proof
Q
K
J
L
F
B
46
77
GT05
dummy receptacle
• Square flange
• Four through mounting holes
• Stows cable plugs when not in use
All dimensions for reference only.
Inches
Shell
Size
M
+ .016
– .000
N
+ .000
– .006
P
± .008
R
± .004
S
± .012
T
+ .004
– .000
10SL .559 .717 .110 .717 1.000 .126
14S .559 .969 .126 .906 1.181 .126
16S .559 1.079 .126 .969 1.280 .126
16 .748 1.079 .126 .969 1.280 .126
18 .748 1.213 .157 1.063 1.378 .126
20 .748 1.346 .157 1.157 1.496 .126
22 .748 1.472 .157 1.252 1.614 .126
24 .811 1.610 .157 1.374 1.752 .146
28 .811 1.839 .157 1.563 2.000 .146
32 .874 2.102 .157 1.752 2.244 .169
36 .874 2.346 .157 1.937 2.500 .169
40 .874 2.579 .157 2.185 2.752 .169
Millimeters
Shell
Size
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15
P
± 0.2
R
± 0.1
S
± 0.3
T
+ 0.1
– 0.0
10SL 14.2 18.2 2.8 18.2 25.4 3.2
14S 14.2 24.6 3.2 23.0 30.0 3.2
16S 14.2 27.4 3.2 24.6 32.5 3.2
16 19.0 27.4 3.2 24.6 32.5 3.2
18 19.0 30.8 4.0 27.0 35.0 3.2
20 19.0 34.2 4.0 29.4 38.0 3.2
22 19.0 37.4 4.0 31.8 41.0 3.2
24 20.6 40.9 4.0 34.9 44.5 3.7
28 20.6 46.7 4.0 39.7 50.8 3.7
32 22.2 53.4 4.0 44.5 57.0 4.3
36 22.2 59.6 4.0 49.2 63.5 4.3
40 22.2 65.5 4.0 55.5 69.9 4.3
R
RS
S
T
N
MP
47
78
GTTB
thru-bulkhead receptacles
All dimensions for reference only.
Inches
Shell
Size
L
Max.
M
+ .016
– .000
N
+ .000
– .006
P
± .008
R
± .004
S
± .012
T
+ .004
– .000
10SL 1.488 .717 .717 .110 .717 1.000 .126
14S 1.488 .717 .969 .126 .906 1.181 .126
16S 1.488 .717 1.079 .126 .969 1.280 .126
16 2.049 .846 1.079 .126 .969 1.280 .126
18 2.049 .907 1.213 .157 1.063 1.378 .126
20 2.049 .907 1.346 .157 1.157 1.496 .126
22 2.049 .907 1.472 .157 1.252 1.614 .126
24 2.049 .907 1.610 .157 1.374 1.752 .146
28 2.049 .947 1.839 .157 1.563 2.000 .146
32 2.049 .947 2.102 .157 1.752 2.244 .169
36 2.049 .947 2.346 .157 1.937 2.500 .169
40 2.049 .947 2.579 .157 2.185 2.752 .169
Millimeters
Shell
Size
L
Max.
M
+ 0.4
– 0.0
N
+ 0.00
– 0.15
P
± 0.2
R
± 0.1
S
± 0.3
T
+ .004
– .000
10SL 37.7 18.2 18.2 2.8 18.2 25.4 3.2
14S 37.7 18.2 24.6 3.2 23.0 30.0 3.2
16S 37.7 18.2 27.4 3.2 24.6 32.5 3.2
16 52.0 21.5 27.4 3.2 24.6 32.5 3.2
18 52.0 23.0 30.8 4.0 27.0 35.0 3.2
20 52.0 23.0 34.2 4.0 29.4 38.0 3.2
22 52.0 23.0 37.4 4.0 31.8 41.0 3.2
24 52.0 23.0 40.9 4.0 34.9 44.5 3.7
28 52.0 24.0 46.7 4.0 39.7 50.8 3.7
32 52.0 24.0 53.4 4.0 44.5 57.0 4.3
36 52.0 24.0 59.6 4.0 49.2 63.5 4.3
40 52.0 24.0 65.5 4.0 55.5 69.9 4.3
• Accepts mating plug on both sides
• Four through mounting holes
R
RS
S
T
N N
PM
L
48
2
GT Series
insert availability
Insert
Arrange-
ment
Service
Rating
Tot al
Con-
tacts
Contact Size
0 4 8 12 16
Coax
04812
10SL-3 A 3 3
10SL-4† A 2 2
14S-2 Inst. 4 4
14S-4 D 1 1
14S-5 Inst. 5 5
14S-6 Inst. 6 6
14S-7 A 3 3
14S-9 A 2 2
14S-10 Inst. 4 4
14S-12 A 3 3
14S-A7 A 7 7
16S-1 A 7 7
16S-3 B 1 1
16S-4 D 2 2
16S-5 A 3 3
16S-6 A 3 3
16S-8 A 5 5
16-2 E 1 1
16-7 A 3 12
16-9 A 4 22
16-10 A 3 3
16-11 A 2 2
16-12 A 1 1
16-13 A 2 2
16-59 A 4 4
18-1 A/Inst. 10 10
18-3 D 2 2
18-4 D 4 4
18-5 D 3 21
18-6 D 1 1
18-7 B 1 1
18-8 A 8 17
18-9 Inst. 7 25
18-10 A 4 4
18-11 A 5 5
18-12 A 6 6
18-13 A 4 13
18-14 A 2 1 1
18-15 A 4 4
18-16 C 1 1
18-17 Inst. 7 25
18-19 A 10 10
18-20 A 5 5
18-22 D 3 3
18-24 A/Inst. 10 10
18-29 A 5 5
18-30 A 5 5
18-31 A 5 5†10SL-4 arrangement available only with pin contacts in receptacle and socket
contacts in plug
20-2 D 1 1
20-3 D 3 3
20-4 D 4 4
20-6 D 3 3
20-7 D/A 8 8
20-8 Inst. 6 2 4
20-9 D/A 8 1 7
20-11 Inst. 13 13
20-12 A 2 1 1
20-14 A 5 2 3
20-15 A 7 7
20-16 A 9 2 7
20-17 A 6 5 1
20-18 A 9 3 6
20-19 A 3 3
20-20 A 4 1 3
20-21 A 9 1 8
20-22 A 6 3 3
20-23 A 2 2
20-24 A 4 2 2
20-25 Inst. 13 13
20-26 A 19 19
20-27 A 14 14
20-29 A 17 17
20-30 Inst. 13 13
20-33 A 11 11
20-51 A 3 3
20-57 A 7 7*
20-58 A 10 5 5
20-59 A 3 3*
20-66 A 6 5* 1
20-79 A/D 8 1 7
22-1 D 2 2
22-2 D 3 3
22-4 A 4 2 2
22-5 D 6 2 4
22-6 D 3 2 1
22-7 E 1 1
22-8 E 2 2
22-9 E 3 3
22-10 E 4 4
22-11 B 2 2
22-12 D 5 2 3
22-13 D/A 5 4 1
22-14 A 19 19
22-15 E/A 6 5 1
Insert
Arrange-
ment
Service
Rating
Tot al
Con-
tacts
Contact Size
0 4 8 12 16
Coax
04812
*Crimp contacts accommodate wire the same size as the contact as well as wire of
the next smaller, even size. Arrangements identified with an asterisk (*) are excep-
tions. See insert arrangement drawings on pages 6-28 for application wire size.
**Coaxial cable data can be found on insert arrangement drawings, pages 6-28.
For further information on coaxial contacts and cable see catalog 12-130.
ACA-B/GT Connectors
insert availability
† 10SL-4 arrangement available only with pin contacts in receptacle and socket
contacts in plug.
** Coaxial cable data can be found on insert arrangement drawings, pages 55-77.
For further information on coaxial contacts call Amphenol Industrial
at 888-364-9011.
*Crimp contacts accommodate wire the same size as the contact as well as wire of the
next smaller, even size. Arrangements identied with an asterisk (*) are exceptions.
See insert arrangement drawings on pages 55-77 for application wire size.
49
3
GT Series
insert availability, cont.
Insert
Arrange
ment
Service
Rating
Tot al
Con-
tacts
Contact Size
0 4 8 12 16
Coax**
04812
22-16 A 9 3 6
22-17 D/A 9 1 8
22-18 D/A 8 8
22-19 A 14 14
22-20 A 9 9
22-21 A 3 1 2
22-22 A 4 4
22-23 D/A 8 8
22-24 D/A 6 2 4
22-27 D/A 9 1 8
22-28 A 7 7
22-33 D/A 7 7
22-34 D 5 3 2
22-63 A 12 4 8
22-65 D/A 8 8*
22-70 A 13 8 5
22-80 A 3 3*
24-2 D 7 7
24-3 D 7 2 5
24-5 A 16 16
24-6 D/A 8 8
24-7 A 16 2 14
24-9 A 2 2
24-10 A 7 7
24-11 A 9 3 6
24-12 A 5 2 3
24-16 D/A 7 1 3 3
24-17 D 5 2 3
24-19 A 12 12
24-20 D 11 2 9
24-21 D 10 1 9
24-22 D 4 4
24-27 E 7 7
24-28 Inst. 24 24
24-51 A 5 5
24-52 Hi Volt. 1 1
24-53 A 5 5
24-58 A 13 3 3 7
24-59 A 14 7 7
24-60 A 7 7*
24-65 A 15 11 4
24-66 D 7 7
24-67 Inst. 19 19
24-71 A 7 7*
24-75 A 7 7*
24-79 A 5 5
24-80 Inst. 23 23
24-84 A 19 118
24-96 Inst. 28 28
24-AJ A 25 25
28-1 D/A 9 36
28-2 D 14 2 12
28-3 E 3 3
28-4 E/D 9 27
28-5 D 5 212
28-6 D 3 3
28-7 D 2 2
28-8 E/D/A 12 2 10
28-9 D 12 66
28-10 D/A 7 223
28-11 A 22 4 18
28-12 A 26 26
28-13 A 26 26
28-15 A 35 35
28-16 A 20 20
28-17 B/D/A 15 15
28-18 C/D/A/Inst. 12 12
28-19 B/D/A 10 46
28-20 A 14 10 4
28-21 A 37 37
28-22 D 6 3 3
28-51 A 12 12
28-59 A 17 7 10
28-66 A 16 2 14
28-72 Coax 3 3
28-74 A 16 7* 9
28-75 A 16 7* 9
28-79 A 16 79
28-82 D 6 24
28-84 A 9 9
28-AY A 9 4 5
32-1 E/D 5 2 3
32-2 E 5 32
32-3 D 9 1 2 24
32-4 A/D 14 2 12
32-5 D 2 2
32-6 A 23 2 3 2 16
32-7 Inst./A 35 7 28
32-8 A 30 6 24
32-9 D 14 212
32-10 E/B/D/A 7 22 3
32-12 A/D 15 5 10
32-13 D 23 5 18
32-15 D 8 2 6
32-16 A 23 2 3 2 16
Insert
Arrange
ment
Service
Rating
Tot al
Con-
tacts
Contact Size
0 4 8 12 16
Coax**
04812
*Crimp contacts accommodate wire the same size as the contact as well as wire of
the next smaller, even size. Arrangements identified with an asterisk (*) are excep-
tions. See insert arrangement drawings on pages 6-28 for application wire size.
**Coaxial cable data can be found on insert arrangement drawings, pages 6-28.
For further information on coaxial contacts and cable see catalog 12-130.
ACA-B/GT Connectors
insert availability, cont.
** Coaxial cable data can be found on insert arrangement drawings, pages 55-77.
For further information on coaxial contacts call Amphenol Industrial
at 888-364-9011.
*Crimp contacts accommodate wire the same size as the contact as well as wire of the
next smaller, even size. Arrangements identied with an asterisk (*) are exceptions.
See insert arrangement drawings on pages 55-77 for application wire size.
50
4
Insert
Arrange-
ment
Service
Rating
Tot al
Con-
tacts
Contact Size
0 4 8 12 16
Coax**
04812
32-17 D 4 4
32-22 A 54 54
32-25 A 25 25
32-31 A 31 31
32-48 Inst. 48 48
32-52 D 8 2 6
32-53 E/Inst. 42 5 37
32-56 A 30 6* 24
32-57 Coax 8 62
32-58 Coax 4 4
32-59 A 42 40 2
32-60 A 23 15 8
32-62 Coax 23 2 1 2 16 2
32-64 Inst. 54 54
32-68 A 16 12 4
32-73 A 46 46
32-75 Coax 9 2 7
32-76 A 19 19
32-79 D 5 41
32-82 A 16 412
32-AF A 55 55
32-AM A 1 1 size 4/0
36-1 D 22 4 18
36-3 D 6 3 3
36-4 D/A 3 3
36-5 A 4 4
36-6 A 6 2 4
36-7 A 47 7 40
36-8 A 47 1 46
36-9 A 31 1 2 14 14
36-10 A 48 48
36-11 A 48 48
36-12 A 48 48
36-13 E/A 17 2 15
36-14 D 16 556
36-15 D/A 35 35
36-16 A 47 7 40
36-17 A 47 7 40
36-18 A 31 1 2 14 14
36-20 A 34 2 2 30
36-22 D 22 22
36-51 D 4 2 2
36-52 A 52 52
36-54 A 39 831
36-55 A 39 8* 31
36-59 A 53 3* 50
36-60 A 47 7* 40
36-64 Coax 4 4
36-65 Coax 4 4
GT Series
insert availability, cont.
**Coaxial cable data can be found on insert arrangement drawings, pages 6-28.
For further information on coaxial contacts and cable see catalog 12-130.
36-71 A 53 3 50
36-73 Coax 7 7
36-74 A 44 43 1
36-75 A 48 48*
36-76 A 47 47
36-77 D 7 7
36-78 A 14 12 2
36-79 A 20 20
36-80 A 20 20*
36-83 Coax 7 7
36-85 A/D 35 35*
36-97 C 1 1 size 4/0
36-99 D 12 3 3 3 3
36-AF A 48 48
40-1 D 30 6 24
40-5 A 5 5
40-9 A 47 1 22 24
40-10 A 29 4 9 16
40-30 A 30 1 29
40-35 D 35 35
40-53 A 60 60
40-56 A 85 85
40-57 E 4 4
40-61 A 59 1 3 55
40-62 A 60 60
40-63 A 61 61*
40-64 Coax 36 3 20 13
40-66 Coax 4 4
40-67 A 11 1 10
40-68 A 21 21
40-70 A 61 61
40-72 A 11 1 10
40-73 A 61 61
40-74 A 6 1 4 1
40-75 E 5 4 1
40-80 A 11 10 1
40-81 A 62 62*
40-82 A 62 62
40-85 A 60 60*
40-86 Coax 4 4
40-87 D 7 7
40-AD A 8 4 4
40-AG A 38 38
40-AP E 2 2 size 4/0
40-AR Inst. 13 3 3 7
40-AS A 40 25 15
40-AT A 43 1 24 18
40-AU A 14 3 10 1
40-AV D 3 3 size 2/0
Insert
Arrange-
ment
Service
Rating
Tot al
Con-
tacts
Contact Size
0 4 8 12 16
Coax**
04812
*Crimp contacts accommodate wire the same size as the contact as well as
wire of the next smaller, even size. Arrangements identified with an asterisk (*)
are exceptions. See insert arrangement drawings on pages 6-28 for applica-
tion wire size.
ACA-B/GT Connectors
insert availability, cont.
** Coaxial cable data can be found on insert arrangement drawings, pages 55-77.
For further information on coaxial contacts call Amphenol Industrial
at 888-364-9011.
*Crimp contacts accommodate wire the same size as the contact as well as wire of the
next smaller, even size. Arrangements identied with an asterisk (*) are exceptions.
See insert arrangement drawings on pages 55-77 for application wire size.
51
5
GT Series
insert alternate positioning
To avoid cross-plugging problems in applications requir-
ing the use of more than one connector of the same size
and arrangement, alternate rotations are available as
indicated in the accompanying charts.
As shown in the diagram below, the front face of the pin
insert is rotated within the shell in a clockwise direction
from the normal shell key. The socket insert would be
rotated counter-clockwise the same number of degrees
in respect to the normal shell key.
Position W Position X Position Y Position Z
View looking into front face of pin insert or rear of socket insert.
The following insert arrangements have the same alter-
nate insert rotations for W, X, Y and Z, which are:
Degrees
WX YZ
80 110 250 280
T
16-7 20-16 22-18 24-4 24-28 28-16 32-10
18-5 20-20 22-19 24-5 24-AJ 28-17 32-12
18-9 20-22 22-21 24-6 28-1 28-19 32-13
18-13 22-3 22-24 24-7 28-4 28-20 32-22
18-14 22-6 22-25 24-12 28-8 28-21 32-AF
20-7 22-12 22-29 24-14 28-9 32-1 36-1
20-8 22-14 22-33 24-16 28-10 32-3 36-7
20-9 22-15 22-34 24-17 28-11 32-4 36-8
20-12 22-16 24-1 24-20 28-14 32-6 36-13
20-14 22-17 24-3 24-21 28-15 32-9 40-53
Insert
Arrangement
Degrees
WX Y Z
10SL-4 63 – – –
14S-2 – 120 240 –
14S-5 – 110 – –
14S-7 90 180 270 –
14S-9 70 145 215 290
16-9 35 110 250 325
16-10 90 180 270 –
16-11 35 110 250 325
16-13 35 110 250 325
16S-1 80 – – 280
16S-4 35 110 250 325
16S-5 70 145 215 290
16S-6 90 180 270 –
16S-8 – 170 265 –
18-1 70 145 215 290
18-3 35 110 250 325
18-4 35 110 250 325
18-8 70 – – 290
18-10 – 120 240 –
18-11 – 170 265 –
18-12 80 – – 280
18-15 – 120 240 –
18-20 90 180 270 –
18-22 70 145 215 290
18-29 90 180 270 –
20-3 70 145 215 290
20-4 45 110 250 –
20-5 35 110 250 325
20-6 70 145 215 290
20-15 80 – – 280
20-17 90 180 270 –
20-18 35 110 250 325
20-19 90 180 270 –
20-21 35 110 250 325
20-23 35 110 250 325
20-24 35 110 250 325
20-27 35 110 250 325
20-29 80 – – 280
20-33 – – – 280
22-1 35 110 250 325
22-2 70 145 215 290
22-4 35 110 250 325
22-5 35 110 250 325
22-8 35 110 250 325
22-9 70 145 215 290
22-10 35 110 250 325
22-11 35 110 250 325
22-13 35 110 250 325
22-20 35 110 250 325
22-22 – 110 250 –
22-23 35 – 250 –
22-27 80 – 250 280
22-28 80 – – 280
24-2 80 – – 280
24-9 35 110 250 325
24-10 80 – – 280
24-11 35 110 250 325
24-22 45 110 250 –
24-27 80 – – 280
24-96 65 – – –
28-2 35 110 250 325
28-3 70 145 215 290
28-5 35 110 250 325
28-6 70 145 215 290
Insert
Arrangement
Degrees
WX Y Z
*Additional rotations available; consult Amphenol for
information.
28-7 35 110 250 325
28-12 90 180 270 –
28-18 70 145 215 290
28-22 70 145 215 290
28-AY 45 110 250 –
32-2 70 145 215 290
32-5 35 110 250 325
32-7 80 125 235 280
32-8 80 125 235 280
32-15 35 110 250 280
32-17 45 110 250 –
32-25 60 120 – –
32-64* 80 100 110 250
32-68 30 – – –
32-82 30 – – –
36-3 70 145 215 290
36-4 70 145 215 290
36-5 – 120 240 –
36-6 35 110 250 325
36-9 80 125 235 280
36-10 80 125 235 280
36-14 90 180 270 –
36-15 60 125 245 305
36-AF 65 – – –
40-1 65 130 235 300
40-5 33 – – 270
40-9 65 125 225 310
40-10 65 125 225 310
40-35 70 130 230 290
40-56 72 144 216 288
40-AG 37 74 285 322
Insert
Arrangement
Degrees
WX Y Z
AB
AB
A
B
A
B
ACA-B/GT Connectors
insert alternate positioning
52
Machined copper alloy contacts in a full range of sizes, with closed entry socket design in the
size 12 and 16 contacts. A heavy silver-plated nish is deposited on all solder con tacts for
maximum corrosion resistance, maximum current carrying capacity and low millivolt drop. Gold
plated contacts are also available. (See how to order, page 78 for ACA-B and page 79 for GT.)
Pin/
Socket
Mating End
Size
Wire Barrel
Size
Allowable
Wire Size
Test Current**
Amps
Pin
Socket 16 Short†16
16
18
20
22
13
10
7.5
5
Pin
Socket 16 Long 16
16
18
20
22
13
10
7.5
5
Pin
Socket
12 12 12
14
23
17
Pin
Socket
8 8 8
10
46
33
Pin
Socket
4 4 4
6
80
60
Pin
Socket
0 0
0
1
2
150
125
100
** Contact ratings as stated are test ratings only. The connector may not withstand full rated current through all contacts continuously.
Please note that the electrical data given is not an establishment of electrical safety
factors. This is left entirely in the designer’s hands as he can best determine which
peak voltage, switching surges, transients, etc. can be expected in a particular circuit.
Table I
MIL-SPEC CONTACT ARRANGEMENT
SERVICE RATING
MS
Service
Rating
Recommended
Operating Voltage*
at Sea Level
Effective
Creepage
Distance
Nom.
Mechanical
Spacing
Nom.DC AC (RMS)
Inst. 250 200 1/16
A700 500 1/8 1/16
D1250 900 3/16 1/8
E 1750 1250 1/4 3/16
B 2450 1750 5/16 1/4
C 4200 3000 1 5/16
* The values listed in Table I represent operating values
which include a generous safety factor. It may be
nec essary for some applications to exceed the operating
voltages listed here. If this is necessary, designers will
nd Table II useful for determining the degree to which
the recommended values of Table I can be exceeded.
Table II
ALTITUDE VOLTAGE
DERATING** CHART
MS
Service
Rating
Nominal
Distance
Standard Sea
Level Conditions
Pressure Altitude †
50,000 Feet
Pressure Altitude †
70,000 Feet
Airspace Creepage
Minimum
Flashover
Voltage
AC (RMS)
Test
Voltage
AC (RMS)
Minimum
Flashover
Voltage
AC (RMS)
Test
Voltage
AC (RMS)
Minimum
Flashover
Voltage
AC (RMS)
Test
Voltage
AC (RMS)
Inst. 1/32 1/16 1400 1000 550 400 325 260
A1/16 1/8 2800 2000 800 600 450 360
D1/8 3/16 3600 2800 900 675 500 400
E 3/16 1/4 4500 3500 1000 750 550 440
B 1/4 5/16 5700 4500 1100 825 600 480
C 5/16 1 8500 7000 1300 975 700 560
† Not corrected for changes in density due to variations in temperature.
** No attempt has been made to recommend operating voltages. The designer must determine his own
oper ating voltage by the application of a safety factor to the above derating chart to compensate for circuit
tran sients, surges, etc.
ACA-B/GT Connectors
solder contacts
† The 10SL, 14S and 16S connectors
require short contacts.
53
CRIMP CONTACTS
CRIMP CONTACT DATA APPLICATION TOOLS
PART NUMBER
MATING
SIZE
WIRE
WELL Crimp Tools
Positioner/
Die Set
Locator/
Color
PIN CONTACT SOCKET CONTACT
SILVER GOLD SILVER GOLD
10-40553 10-597160-1531 10-597109-161 10-597109-1631
16S
16-18-20
Daniels AF8 or
Equivalent
TH29-1 or
Equivalent
Red
10-606014-40 10-597160-4031 10-597109-401 10-597109-4031 12-14
10-606014-221 10-597160-1931 10-597109-191 10-597109-1931 14-16
10-606014-291 10-597160-3431 10-597109-341 10-597109-3431 20-22
10-606014-46 10-597160-4631 10-597109-461 10-597109-4631 20-24
10-40557 10-597160-1631 10-597109-171 10-597109-1731
16
16-18-20
Pin - Blue
Socket - Green
10-606014-022 10-597160-2231 10-597109-221 10-597109-2231 12-14
10-606014-171 10-597160-1731 10-597109-141 10-597109-1431 14-16
10-606014-311 10-597160-3331 10-597109-331 10-597109-3331 20-22
10-606014-361 10-597160-3631 10-597109-361 10-597109-3631 20-24
10-606014-121 10-597160-1231 10-597109-131 10-597109-1331
12
12-14
Green
10-606014-231 10-597160-2331 10-597109-231 10-597109-2331 8-10
10-606014-251 10-597160-2631 10-597109-261 10-597109-2631 10-12
10-606014-271 10-597160-2731 10-597109-271 10-597109-2731 14-16-18
10-606014-261 10-597160-2431 10-597109-241 10-597109-2431 18-20
10-606014-201 10-597160-2031 10-597109-201 10-597109-2031 20-22
10-40792 10-597160-831 10-40793 10-597109-831
8
8
Pico 400BH31
Pico 41431A-8N
Pico
Pin - 4025
Socket - 4026
10-606014-41 10-597160-4131 10-597109-411 10-597109-4131 6
10-606014-321 10-597160-2831 10-606015-321 10-597109-2831 10-12
10-606014-381 10-597160-3831 10-597109-381 10-597109-3831 12-14
10-40564 10-597160-431 10-40565 10-597109-431
4
4
Pico 41431A-4N Pico 4043
10-606014-58 10-597160-5831 10-597109-581 10-597109-5831 6
10-606014-331 10-597160-3531 10-597109-351 10-597109-3531 8
10-606014-44 10-597160-4431 10-606015-44 10-597109-4431 10
10-581806-000 10-597160-131 10-581808-000 10-597159-131
0
0
Pico 41431A-0N
Pico
Pin - 4042-1
Socket - 4042
10-606014-341 10-597160-2931 10-597109-291 10-597109-2931 0-2
10-606014-351 10-597160-3031 10-606015-351 10-597109-3031 4
10-597276-48 10-597276-4831 10-606015-48 10-597109-4831 2/0 2/0 Pico 500 Pico 51431A2/0N Pico
Pin - 6490
10-597276-47 10-597276-4731 10-606015-47 10-597109-4731 4/0 4/0 Pico 51431A4/0N Socket - 6491
Machined from copper alloys and silver or gold plated for maximum corrosion resistance, with a mini-
mum millivolt drop and a maximum current carrying capacity, the size 16 and 12 socket contacts are of
the closed entry design. Crimp contacts are available for all insert arrangements and are identied based
on part number call out. (See how to order, page 78 for ACA-B and page 79 for GT.)
ACA-B/GT Connectors
crimp contacts and application tools
Additional contact variations including thermocouple contacts are available;
consult Amphenol, Sidney, NY for information.
54
RADSOK® Technology
RADSOK® Technology Advantages
RADSOK’S twisted grid conguration allows for 50% more current
to pass through the same size pin, while providing increased
reliability, ampacity and cycle durability as well as lower insertion
force, T-rise and voltage drop.
• HIGH RELIABILITY
Unique RADSOK® design and construction technology create
an electrical contact interface that exceeds typical interconnect
requirements. Applications in aerospace, medical, industrial,
automotive, mining, offshore, and other harsh environments
depend on the high reliability of Amphenol’s RADSOK® technology.
• LOW CONTACT ENGAGEMENT/SEPARATION FORCES
The hyperbolic lamella socket contact construction distributes
normal forces over a high percentage of the mating pin surface.
This creates a smooth, even engagement effort. This force
distribution also contributes to excellent performance in vibration
applications with resistance to typical fretting corrosion.
• LOW CONTACT RESISTANCE
The large interface area between the socket lamella and pin
surface result in very low contact resistance, enabling the
RADSOK® contacts’ high current ratings compared to traditional
power contact designs.
• HIGH MATING CYCLE DURABILITY
RADSOK® contacts with typical silver plating nishes have
demonstrated survival of 20,000 mating cycles. Specialized
plating and contact lubricants can extend cycle life to 200,000
matings or higher. Even with continuous exposure to harsh
environmental abuse (salt, sand, and high humidity), RADSOK®
contacts have been tested to maintain low contact resistance
beyond 10,000 mating cycles.
CRIMP CONTACT DATA APPLICATION TOOLS
RADSOK® Part Number
Mating
Size
Wire
Well
Crimp
Tools Positioner/Die Set Locator/ColorSocket Contact
Silver Gold
10-639140-121 10-639140-1231 12 12-14 Daniels AF8 or Equivalent TH29-1 or Equivalent Green
10-639140-081 10-639140-0831 8 8 Pico 400BH31 Pico 41431A-8N Socket - 4026
10-639140-041 10-639140-0431 4 4 Pico 400BH31 Pico 41431A-4N Pico 4043
10-639140-001 10-639140-0031 0 0 Pico 400BH31 Pico 41431A-0N Socket - 4042
RADSOK® Derating Chart –
Temperature vs. Current
Based on single conductors in free air. Wire
cross-section same size as pin contact cross-
sectional area.
RADSOK® Socket Table
55
6
AB
C
AB
A
BC
D
A
B
C
D
E
FA
B
C
D
EA
B
C
AB
100˚
A
BC
D
100˚
A
B
C
A
B
CD
E
F
G
AB
A
BC
A
B
CA
B
C
D
E
AB
C
A
B
C
D
A
F
E
D
C
B
G
front face of pin insert or rear face of socket insert illustrated
GT Series
contact arrangements
Insert Arrangement 10SL-3 10SL-4 14S-2 14S-4 14S-5
Service Rating A A Inst. DInst.
Number of Contacts 3 2 4 1 5
Contact Size 16 16 16 16 16
Insert Arrangement 14S-6 14S-7 14S-9 14S-10 14S-12
Service Rating Inst. A A Inst. A
Number of Contacts 6 3 2 4 3
Contact Size 16 16 16 16 16
Insert Arrangement 14S-A7 16S-1 16S-3 16S-4 16S-5
Service Ratin
g AA B DA
Number of Contacts 7 7 1 2 3
Contact Size 16 16 16 16 16
Insert Arrangement 16S-6 16S-8 16-2 16-7 16-9
Service Rating A A E A A
Number of Contacts 3 5 1 12 22
Contact Size 16 16 12 8 16 12 16
CONTACT LEGEND 16 12 8 4 0
Front of
Socket Insert
Front of
Socket Insert
100° Rotation
of 14S-2
100° Rotation
of 14S-7
ACA-B/GT Connectors
contact arrangements
56
7
A
B
AB
AB
A
BC
D
A
BC
A
B
C
D
E
F
G
H
A
B
C
D
E
F
G
A
BC
DA
BC
D
E
A
B
C
D
E
F
A
B
C
D
A
B
A
B
C
D
100˚
A
B
C
D
E
F
G
A
BC
DEF G
H
K
J
AB
C
D
E
front face of pin insert or rear face of socket insert illustrated
GT Series
contact arrangements
Insert Arrangement 16-10 16-11 16-12 16-13 16-59
Service Ratin
g AA A AA
Number of Contacts 3 2 1 2* 4
Contact Size 12 12 412 12
Insert Arrangement 18-1 18-3 18-4 18-5 18-6 18-7
Service Rating B, C, F, G = A; Bal. = Inst. D D D D B
Number of Contacts 10 2 4 21 1 1
Contact Size 16 12 16 12 16 4 8
Insert Arrangement 18-8 18-9 18-10 18-11 18-12 18-13
Service Rating AInst. A A A A
Number of Contacts 17 25 4 5 6 13
Contact Size 12 16 12 16 12 12 16 8 12
Insert Arrangement 18-14 18-15 18-16 18-17 18-19 18-20
Service Rating A A C Inst. A A
Number of Contacts 11 4** 125 10 5
Contact Size 4 16 12 12 12 16 16 16
CONTACT LEGEND 16 12 8 4 0
* A = Iron; B = Constantan
**A, C = Iron; B, D = Constantan
100° Rotation
of 18-9
A
B
C
D
E
F
G
H
I
J
B
CA
AB
CD
ACA-B/GT Connectors
contact arrangements
57
8
110˚
AB
C
D
E
A
BC
A
BC
A
B
C
DE
F
G
H
A
B
C
D
EF
A
B
C
DE
F
GH
A
BC
D
E
F
GH
J
K
L
M
N
A
B
A
B
C
D
EA
B
CD
EG
F
A
B
C
D
EFG
H
I
A
BC
D
E
F
260˚
AB
C
D
E
front face of pin insert or rear face of socket insert illustrated
GT Series
contact arrangements
Insert Arrangement 18-22 18-24 18-29 18-30 18-31 20-2
Service Rating D B, C, F, G = A; Bal. = Inst. A A A D
Number of Contacts 310 5 5 5 1
Contact Size 16 16 16 16 16 0
Insert Arrangement 20-3 20-4 20-6 20-7 20-8 20-9
Service Rating D D D A, B, H, G = D; C, D, E, F = A Inst. H = D; Bal. = A
Number of Contacts 3 4 3 8 24 17
Contact Size 12 12 16 16 8 16 12 16
Insert Arrangement 20-11 20-12 20-14 20-15 20-16 20-17
Service Rating Inst. A A A A A
Number of Contacts 13 11 23 727 51
Contact Size 16 4 16 8 12 12 12 16 12 16
CONTACT LEGEND 16 12 8 4 0
110° Rotation
of 18-20
A
B
C
D
E
A
B
D
C
250˚
A
B
C
D
E
F
G
H
I
J
AB
G
250° Rotation
of 18-1
260° Rotation
of 18-20
ACA-B/GT Connectors
contact arrangements
58
9
A
B
C
D
A
B
C
D
E
F
G
H
I
A
B
C
D
E
F
A
B
A
B
C
D
100˚
A
BC
D
E
F
GH
J
K
L
M
N
A
B
C
D
EF
G
H
I
J
K
L
M
N
AB
C
D
E
F
G
H
J
K
L
MN
PT
SR
250˚
A
BC
D
E
F
GH
J
K
L
M
N
A
B
C
D
E
F
K
H
JM
L
front face of pin insert or rear face of socket insert illustrated
GT Series
contact arrangements
Insert Arrangement 20-18 20-19 20-20 20-21 20-22 20-23
Service Rating AA AAAA
Number of Contacts 36 313 18 33 2
Contact Size 12 16 84 12 12 16 8 16 8
Insert Arrangement 20-24 20-25 20-26 20-27 20-29 20-30
Service Rating AInst. A A A Inst.
Number of Contacts 22 13 19 14 17 13
Contact Size8161616161
61
6
Insert Arrangement 20-33 20-51 20-57 20-58 20-59 20-66
Service Rating A A A A A A
Number of Contacts 11 3* 7* 55 3* 15
Contact Size 16 8 12 for #14 or 16 wire 12 16 8 for #10 or 12 wire 16 12 for #10 wire
* Solderless CONTACT LEGEND 16 12 8 4 0
250° Rotation
of 20-11
100° Rotation
of 20-11
A
BC
A
B
C
D
E
F
G
H
I
A
B
C
D
E
F
G
HSR
JT
V
P
K
L
M
UN
A
B
C
A
B
CD
EG
F
A
BC
DE
F
H
J
K
L
A
B
C
A
BC
D
E
F
ACA-B/GT Connectors
contact arrangements
59
10
A
BC
A
BC
D
AB
A
B
CD
E
A
B
C
D
E
A
B
C
D
E
F
G
H
J
K
LM
NU
V
R
S
TP
A
B
E
F
C
D
front face of pin insert or rear face of socket insert illustrated
GT Series
contact arrangements
Insert Arrangement 20-79 22-1 22-2 22-4 22-5
Service Rating H=D; Bal. = A D D A D
Number of Contacts 7* 1* 2 3 22 24
Contact Size 16 12 for #16 wire 8 88 12 12 16
Insert Arrangement 22-6 22-7 22-8 22-9 22-10
Service Rating D E E E E
Number of Contacts 21 1 2 3 4
Contact Size 8 16 012 12 16
Insert Arrangement 22-11 22-12 22-13 22-14 22-15
Service Rating B D E = D; A, B, C, D = A AD = E; A, B, C, E, F = A
Number of Contacts 223 41 19 51
Contact Size 16 8 16 12 16 16 12 16
* Solderless CONTACT LEGEND 16 12 8 4 0
A
B
C
D
A
B
CD
E
F
A
B
C
AB
AB
A
BC
A
B
C
D
E
F
G
H
ACA-B/GT Connectors
contact arrangements
60
11
A
B
C
D
E
F
A
B
C
D
E
F
G
H
J
A
B
C
E
F
G
D
A
BC E
FG
DA
BC
DE
front face of pin insert or rear face of socket insert illustrated
GT Series
contact arrangements
Insert Arrangement 22-16 22-17 22-18 22-19 22-20
Service Rating AA = D; Bal. = A A, B, F, G, H = D; C, D, E = A A A
Number of Contacts 36 18 814 9
Contact Size 12 16 12 16 16 16 16
Insert Arrangement 22-21 22-22 22-23 22-24 22-27
Service Rating A A H = D; Bal. = A C, D, E = D; A, B, F = A J = D; Bal. = A
Number of Contacts 12 4 8 24 18
Contact Size 0 16 812 12 16 8 16
Insert Arrangement 22-28 22-33 22-34 22-63 22-65
Service Rating A A, B, C, D = D; E. F. G = A D A H = D; Bal. = A
Number of Contacts 7 7 32 48 8*
Contact Size 12 16 12 16 12 16 12 for #14 or 16 wire
* Solderless CONTACT LEGEND 16 12 8 4 0
A
B
C
D
E
FGH
J
A
B
C
D
E
F
G
H
J
A
B
C
D
E
F
G
H
A
B
C
D
E
F
G
H
J
KL
M
N
P
A
B
CDE
F
GH
J
A
B
C
A
BC
DA
B
C
D
E
F
G
H
A
BC
E
F
H
J
K
L
M
N
D
A
B
C
D
E
F
G
H
ACA-B/GT Connectors
contact arrangements
61
12
AB
C
D
E
AB
C
D
EF
G
H
J
KL
A
B
C
D
E
FH
J
K
L
M
N
front face of pin insert or rear face of socket insert illustrated
GT Series
contact arrangements
Insert Arrangement 22-70 22-80 24-2 24-3 24-5
Service Ratin
g AAD D A
Number of Contacts 85 3* 725 16
Contact Size 12 16 8 for #10 or 12 wire 12 12 16 16
Insert Arrangement 24-6 24-7 24-9 24-10 24-11
Service Rating A, G, H = D; Bal. = A A A A A
Number of Contacts 82 14 2 7 36
Contact Size 12 12 16 4 8 8 12
Insert Arrangement 24-12 24-16 24-17 24-19 24-20
Service Rating AA, B, F, G = D; C, D, E = A D A D
Number of Contacts 23 133 23 12 29
Contact Size 4 12 8 12 16 12 16 16 12 16
* Solderless CONTACT LEGEND 16 12 8 4 0
A
B
C
D
E
F
G
A
B
C
E
F
G
D
AB
C
DE
FGH
JK
LMN
P
S
R
A
B
C
D
E
F
G
H
AB
C
D
E
F
G
H
J
K
L
M
N
P
IO
AB
A
B
CD
E
F
G
ABC
D EF
G
H
I
A
B
C
D
E
A
B
C
D
E
F
G
A
B
C
DE
F
H
J
K
L
M
N
P
A
BC
ACA-B/GT Connectors
contact arrangements
62
13
front face of pin insert or rear face of socket insert illustrated
GT Series
contact arrangements
Insert Arrangement 24-21 24-22 24-27 24-28 24-51
Service Rating D D E Inst. A
Number of Contacts 19 4 7 24 5*
Contact Size 8 16 816 16 B, E for AN #10 or 12 wire
A, C, D for AN #8 wire
Insert Arrangement 24-52 24-53 24-58 24-59 24-60
Service Rating Hi-Volt A A A A
Number of Contacts 15* 337 77 7*
Contact Size 12 88 12 16 12 16 8 for #10 or 12 wire
Insert Arrangement 24-65 24-66 24-67 24-71 24-75
Service Rating A D Inst. A A
Number of Contacts 11 4 719 2* 5* 52
Contact Size 12 16 12 12 8 8 for #10 or 12 wire 8 8 for #16 wire
* Solderless CONTACT LEGEND 16 12 8 4 0
ABCD
EFGH J
KL
M
NPQ
RST
U
V
WX YZ
A
B
C
D
E
F
G
H
JK
A
BC
DA
B
C
D
E
F
G
A
B
C
D
E
F
H
J
K
LM
N
P
R
A
B
CD
E
F
G
A
B
C
D
E
F
H
J
K
L
M
N
P
R
S
A
B
C
D
E
F
G
90˚
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
A
B
CD
E
F
G
A
B
C
D
E
A
B
C
D
E
A
B
C
D
E
F
HJ
K
L
M
N
P
A
B
CD
E
F
G
ACA-B/GT Connectors
contact arrangements
63
14
front face of pin insert or rear face of socket insert illustrated
GT Series
contact arrangements
Insert Arrangement 24-79 24-80 24-84 24-96 24-AJ
Service Rating AInst. AInst. A
Number of Contacts 523 1 18 28 25
Contact Size 816 12 12 (Coax) RG-188/U 16 16
or RG-174/U
Insert Arrangement 28-1 28-2 28-3 28-4
Service Rating A, J, E = D; Bal. = A D E G, P, S = E; Bal. = D
Number of Contacts 36 2 12 327
Contact Size 8 12 12 16 812 16
Insert Arrangement 28-5 28-6 28-7 28-8
Service Rating D D D L, M = E; B = D; Bal. = A
Number of Contacts 212 3 2 2 10
Contact Size 4 12 16 4 4 12 16
CONTACT LEGEND 16 12 8 4 0
AB
C
D
E
F
G
H
J
A
B
C
D
EF
G
H
J
K
L
M
N
P
A
BC
AB
CD
P
S
EFG
A
B
CD
E
A
BC
AB
A
B
C
D
E
A B CD
E F GH J
K LMN P Q
RSTU
V
WX Z
90˚
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15 16
17
18
19
20
21
22
23
24
25
26
27
28
ABCD
EFGHJ
KLMNPQ
RS
T
UV
WXZ
Y
a
A
B
C
D
E
F
G
H
J
K
L
M
ACA-B/GT Connectors
contact arrangements
64
ACA-B/GT Connectors
contact arrangements
15
front face of pin insert or rear face of socket insert illustrated
GT Series
contact arrangements
Insert Arrangement 28-9 28-10 28-11 28-12
Service Rating DG = D; Bal. = A A A
Number of Contacts 66 223 4 18 26
Contact Size 12 16 4 8 12 12 16 16
Insert Arrangement 28-13 28-15 28-16 28-17
Service Rating A A A R = B; M, N, P = D; A to L = A
Number of Contacts 26 35 20 15
Contact Size 16 16 16 16
Insert Arrangement 28-18 28-19 28-20
Service Rating M = C; G, H, J, K,L = D; A, B = A; Bal. = Inst. H, M = B; A, B, = D; Bal. = A A
Number of Contacts 12 46 10 4
Contact Size 16 12 16 12 16
* Solderless CONTACT LEGEND 16 12 8 4 0
A
B
C
DE
F
G
H
J
K
LM
A
B
CD
E
F
GA
B
C
D
E
F
G
H
J
K
L
M
I
N
P
R
S
T
U
V
W
X
A
B
C
D
E
F
G
H
J
K
L
M
PR
N
S
T
U
V
W
X
Y
Z
a
b
d
100˚
A
B
C
D
E
F
G
H
J
K
L
M
PR
N
S
T
U
V
W
X
Y
Z
a
b
d
A
B
CD
E
F
G
HJK
L
M
N
P
R
A
B
C
D
E
F
G
H
J
K
L
M
AB
C
E
G
H
J
K
L
M
AB
CDEFG
HJKLM
P RS T
N
W
XYZ
UV
abc
d
e
f
g
h
jk
m
l
AB
C
D
E
F
G
H
J
K
LM
P
Q
R
S
T
U
VN
A
B
C
D
E
F
G
H
J
K
L
M
N
P
100° Rotation
of 32-6
of 28-12
65
16
front face of pin insert or rear face of socket insert illustrated
GT Series
contact arrangements
Insert Arrangement 28-21 28-22 28-51 28-59
Service Rating A D A A
Number of Contacts 37 33 12 7 10
Contact Size164161
21
2 16
Insert Arrangement 28-66 28-72 28-74 28-75
Service Rating A – A A
Number of Contacts 2 14 39* 4* 3* 9* 7*
Contact Size 8 12 4 (Coax) RG-59A/U 16 8 8 for #10 wire 16 8 for #10 wire
or RG-62A/U (S , T, R)
Insert Arrangement 28-79 28-82 28-84 28-AY
Service Rating A D A A
Number of Contacts 79 24 945
Contact Size 8 16 8 12 84 16
* Solderless CONTACT LEGEND 16 12 8 4 0
A
B
C
DE
F
A
B
C
D
E
F
H
J
K
L
M
N
AB C D
EFH
JK
LMN
P R S TU
AB
C
D
E
F
H
J
K
L
M
N
PR
S
T
A
BC
A
B
C
D
E
F
H
J
K
L
M
N
P
R
S
T
A
B
C
D
E
F
H
J
K
L
M
N
P
R
S
T
A
B
C
D
E
F
H
J
K
L
M
N
P
R
S
T
12
3
45
6
A
B
C
DE
F
G
H
I
A
BC
D
EFGHJ
KLMNPR
STUV WXZ
abcdef
ghjkm
nprs
A
BC
DE F
GH
J
ACA-B/GT Connectors
contact arrangements
66
17
front face of pin insert or rear face of socket insert illustrated
GT Series
contact arrangements
CONTACT LEGEND 16 12 8 4 0
Insert Arrangement 32-1 32-2 32-3 32-4
Service Rating A = E; B, C, D, E = D E D F, J, K, N = A:, Bal. = D
Number of Contacts 2 3 3 2 1 2 2 4 2 12
Contact Size 0 12 4 16 0 4 12 16 12 16
Insert Arrangement 32-5 32-6 32-7
Service Rating D A A, B, h, j = Inst.; Bal. = A
Number of Contacts 2 2 3 2 16 7 28
Contact Size 0 4 8 12 16 12 16
Insert Arrangement 32-8 32-9 32-10
Service Rating A D A, F = E; G = B; B, E = D; C, D = A
Number of Contacts 6 24 2 12 2 2 3
Contact Size 12 16 4 16 4 8 16
A
B
CD
E
A
B
C
D
E
A
B
C
D EF
G
H
J
A
B
AB
CD
EF
GH
J
K LM N
O
PR
S
T
UV
W
I
X
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
f
g
h
j
k
AB
CD E F G
HI J K
L MN
A
B
C
D
E
F
G
H
J
K
L
M
N
O
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
A
B
CD
E
F
G
ACA-B/GT Connectors
contact arrangements
67
18
GT Series
contact arrangements
A
BC
DE
F
G
H
100˚
AB
CD
EF
GH
IJ
KLM N
O
PR
S
T
UV
WX
A
BC
D
AB
CDE
FGHJ
KLM
NO PR
STUVW
XYZa
bcdef
ghjk
mnpr
t
q
suv
xy
zAA
AB AC
AD AE
AF AG
w
100° Rotation
of 32-6
Insert Arrangement 32-12 32-13 32-15 32-16
Service Rating C, D, E, F, G = A; Bal. = D DDA
Number of Contacts 5 10 5 18 26
23216
Contact Size 12 16 12 16 0 12 4 8 12 16
Insert Arrangement 32-17 32-22 32-25 32-31
Service Rating D A A A
Number of Contacts 454 25 31
Contact Size 4161
21
6
Insert Arrangement 32-48 32-52 32-53 32-56
Service Rating Inst. Dt, u = E; Bal. = Inst. A
Number of Contacts 48 26 5 37 24 6
Contact Size 16 0 12 12 16 16 12 for #10 wire
13
12
11
10
9
876
5
4
3
2
1
23
19 22
21
20
15
18
17
16
14
24
25
90˚
A
BC
DE
F
G
H
ABCDE
F
H
J
K
L
MNP
R
S
T
U
V
W
X
Y
Z
abc
d
f
g
h
i
jk
m
n
p
r
tu
vw
s
q
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26 27
28
29
30 31
90° CW Rotation
of 32-15
AB
CDEFH
JKLMNP
RSTUVWX
YZ
abcd f g
hi jkmn p
qrstuv
wxyzAA
BB CC
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
AB
CD EFG
H JK
LM
OP
N
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
CONTACT LEGEND 16 12 8 4 0
front face of pin insert or rear face of socket insert illustrated
ACA-B/GT Connectors
contact arrangements
68
19
CONTACT LEGEND 16 12 8 4 0
** Consult Amphenol, Sidney, NY for service rating of power contacts.
front face of pin insert or rear face of socket insert illustrated
GT Series
contact arrangements
Insert Arrangement 32-57 32-58 32-59 32-60
Service Rating ** – A A
Number of Contacts 62 440 2 15 8
Contact Size 12 0 (Coax) RG-71/U 4 (Coax) RG-161/U 16 8 (Coax) RG-161/U 16 8 (Coax) RG-124/U
or RG-179/U
Insert Arrangement 32-62 32-64 32-68
Service Rating ** Inst. A
Number of Contacts 2 1 2 16 2 54 12 4
Contact Size 4 8 12 16 8 (Coax) RG-124/U 16 16 4 (Coax) RG-58C/U
Insert Arrangement 32-73 32-75 32-76 32-79
Service Rating A8, 9 = D A D
Number of Contacts 46 27 19 41
Contact Size 16 12 8 (Coax) RG-180B/U 12 48
AB
CD
EF
GH
J
K LM N
O
PR
S
T
UV
W
I
X
AB
CDE
FGHJ
KLM
NOPR
STUVW
XYZ
a
bcd e f
ghjk
mnpr
t u v
w
s
xy
z
q
AA
AB AC
AD AE
AF AG
AB
CDE
FG H
J
K LM
NP
QR
1
2
3
4
5
6
7
8
9
1011
12
13
14
15
16
17
18
19
20 21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
1
2
3
4
5
67
89
12 3
4567
8 9 10 11 12
13 14 15 16
17 18 19
A
BC
D
E
A
BC
D
A
B
CD
E
F
H
J
K
LM
N
P
R
S
T
U
V
W
X
Y
Z
a
A
BC
DE
F
G
H
AB
C
D
E
F
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
T
U
Z
a
b
c
d
f
g
h
i
j
k
m
n
pq
w
vst
ACA-B/GT Connectors
contact arrangements
69
20
AB
CDE
FG
HIJ
KLMN
OPRST
UVW X
YZab c
defg
hjkm
np
r
t
s
uv
xy
z
w
A
BC
DE
F
GH
IJKL
M
NOPR
STU
V
WX
Y
Za
bcde
fg hj
k
m
npr
t
u
vw
s
xy
z
front face of pin insert or rear face of socket insert illustrated
GT Series
contact arrangements
Insert Arrangement 32-82 32-AF 32-AM 36-1
Service Rating A A A D
Number of Contacts 4 12 55 14 18
Contact Size 4 16 16 4/0 12 16
Insert Arrangement 36-3 36-4 36-5
Service Rating DA = D; B, C = A A
Number of Contacts 33 3 4
Contact Size 0 12 0 0
Insert Arrangement 36-6 36-7 36-8
Service Rating A A A
Number of Contacts 24 7 40 1 46
Contact Size 04 12 16 12 16
CONTACT LEGEND 16 12 8 4 0 4/0
.
A BC
DE F G H
I JK L MN
OP R S T
U VW
A
B
C
D
E
F
A
BC
A
B
C
D
A
B
C
D
E
F
AB
C DE
F GH J
K LM
NO PR
STUVW
XY Za
bcd ef
ghjk
n
mpr
tuv
w
s
xy
z
q
AA
AB AC
AD AE
AF AG
AH
AB
CDE
FG H
J
K LM
NP
QR
ACA-B/GT Connectors
contact arrangements
70
21
110˚
AB
CDE
FG
HIJ
KLMN
OPRST
UV WX
YZabc
defg
hjkm
np
r
t
uv
w
s
xy
z
Insert Arrangement 36-9 36-10 36-11
Service Rating A A A
Number of Contacts 1 2 14 14 48 48
Contact Size 4 8 12 16 16 16
Insert Arrangement 36-12 36-13 36-14
Service Rating AN, P, Q = E; Bal. = A D
Number of Contacts 48 2 15 556
Contact Size 16 12 16 8 12 16
Insert Arrangement 36-15 36-16 36-17
Service Rating M = D; Bal. = A A A
Number of Contacts 35 7 40 7 40
Contact Size 16 12 16 12 16
110° Rotation
of 36-7
front face of pin insert or rear face of socket insert illustrated
GT Series
contact arrangements
CONTACT LEGEND 16 12 8 4 0
AB
C D E FG
H J K L MN
O PQ R S T U
VWXY Z a b c
de fg hj k
mnpr
tuvw
s
x
yz
q
100˚
AB
CD EFG
H J K L MN
O PQ RS T U
VWX Y Z a b c
def g hj k
mnpr
tuv w
s
x
yz
q
110˚
AB
CD EF G
H J K L MN
O PQR S TU
VWX Y Z a bc
de f g h j k
mnp r
tu vw
s
x
yz
q
A
B
C
D
EF G
H
J
K
LM
NP
Q
RS
A
B
C
D
E
F
G
H
J
K
L
M
N
IP
Q
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Q
R
S
T
U
V
W
X
YZ
a
b
c
d
e
f
gh
j
k
m
100° Rotation
of 36-10
110° Rotation
of 36-10
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
f
100˚
AB
C DE
FG
HIJ
KLMN
OPRS
T
UVWX
YZabc
defg
hjkm
np
r
t
uv
w
s
xy
z
100° Rotation
of 36-7
ACA-B/GT Connectors
contact arrangements
71
22
A
B
CD
AB
C
D
E
F
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
ab
c
d
f
g
h
i
j
km
n
p
rt
s
q
AB
C
D
E
F
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
ab
c
d
f
g
h
i
j
km
n
p
rt
s
q
ABC
D
EF HJK
LMNP R S T
U
VWX YZab
cd fg hi j k
mn p r t
uvw
s
xy
z
q
AA AB
AC
AD
AE
AF
AH
AJ
AB
CDE
FG
HIJ
KLMN
OPRST
UVW X
YZab c
defg
hjkm
np
r
t
s
uv
xy
z
w
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
20
21
22
19
18
front face of pin insert or rear face of socket insert illustrated
GT Series
contact arrangements
Insert Arrangement 36-18 36-20 36-22
Service Rating A A D
Number of Contacts 1 2 14 14 2 2 30 22
Contact Size 4 8 12 16 8 12 16 12
Insert Arrangement 36-51 36-52 36-54
Service Rating D A A
Number of Contacts 22 52 8 31
Contact Size 04 16 8 16
Insert Arrangement 36-55 36-59 36-60
Service Rating A A A
Number of Contacts 31 8 50 3 40 7
Contact Size 16 8 for #6 wire 16 12 for #10 wire 16 12 for #10 wire
CONTACT LEGEND 16 12 8 4 0
AB
CD E FG
H J K LM N
PRS T UV W
XYZ abc
def g
hj
km
ABC
D
EFHJ
K
LM N P R S
T U V W XY Z
abcdf g hi
jkmnpr
tuvw
sx
yz
q
AA AB AC
AD
AE AF
AH
100˚
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
f
100° Rotation
of 36-9
ACA-B/GT Connectors
contact arrangements
72
23
48 49
50 51 52
53 54
55 56 57
58 59 60 61
62 63 64 65 66
67 68 69 70
71 72 73 74 75
76 77 78 79
80 81 82 83
84 85
86 87
88 89
90
91
12
34 5
67
89
10 11
1213
1415
16
17
18
19
202122
2324
25
2627
28
29
30
31 32
33 34
3536
37
38
394041
42 43
4445
4647
48
12
3
45
67 8
9 10 11 12
13 14 15 16 17
18 19 20 21
22 23 24 25 26
27 28 29 30
31 32 33 34 35
36 37 38 39
40 41 42
43 44
45
46 47
A
B
C
D
E
F
G
1
2
3
4
56
7
8
9
10
11
12
13
14
front face of pin insert or rear face of socket insert illustrated
GT Series
contact arrangements
Insert Arrangement 36-64 36-65 36-71
Service Rating – – A
Number of Contacts 4 4 3 50
Contact Size 0 (Coax) RG-11/U 0 (Coax) RG-59/U, RG-62/U 12 16
RG-12/U, or RG-13/U or RG-71/U
Insert Arrangement 36-73 36-74 36-75
Service Rating – A A
Number of Contacts 743 1 48
Contact Size 4 (Coax) RG-62B/U 16 8 (Coax) RG-187/B 16 for #14 wire
Insert Arrangement 36-76 36-77 36-78
Service Rating A D A
Number of Contacts 47 72 12
Contact Size 16 416 8
CONTACT LEGEND 16 12 8 4 0
A
B
C
D
ABC
D
EF HJK
LMNP R S T
U
VWX YZab
cd fg hi j k
mn p r t
uvw
s
xy
z
q
AA AB
AC
AD
AE
AF
AH
AJ
A
B
C
D
E
F
G
A
B
C
D
ACA-B/GT Connectors
contact arrangements
73
24
AB
C
D
E
F
G
H
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
a
b
c
de
f
g
h
j
k
m
n
p
r
t
s
q
u
v
w
x
y
z
A
B
GC
N
1
2
3
4
5
6
7
8
9
10
11
12
front face of pin insert or rear face of socket insert illustrated
GT Series
contact arrangements
Insert Arrangement 36-79 36-80 36-83
Service Rating A A –
Number of Contacts 20 20 7
Contact Size 12 12 for #10 wire 4 (Coax) RG-58/U
Insert Arrangement 36-85 36-97 36-99
Service Rating M = D; Bal. = A C D
Number of Contacts 35 13333
Contact Size 16 for #12 wire 4/0 4 8 12 16
Insert Arrangement 36-AF 40-1 40-5
Service Rating A D A
Number of Contacts 48 6 24 5
Contact Size 16 12 16 0
CONTACT LEGEND 16 12 8 4 0 4/0
1
23 45
6 7 8 9 10
11 12 13 14 15
16 17 18 19
20
A
B
C
D
E
F
G
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Q
RS
T
U
V
W
X
Y
Z
a
b
c
d
f
g
h
j
k
m
e
A BC
D E FG
H I JKL
MNO PRS
T U V WX
YZ ab
cde
1
23 45
6 7 8 9 10
11 12 13 14 15
16 17 18 19
20
ACA-B/GT Connectors
contact arrangements
74
25
1
2
3
4
5
6
7
8
9
1011
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
front face of pin insert or rear face of socket insert illustrated
GT Series
contact arrangements
Insert Arrangement 40-9 40-10 40-30
Service Rating A A A
Number of Contacts 1 22 24 4 9 16 29 1
Contact Size 8 12 16 4 8 16 12 4
Insert Arrangement 40-35 40-53 40-56
Service Rating D A A
Number of Contacts 35 60 85
Contact Size 12 16 16
Insert Arrangement 40-57 40-61 40-62
Service Rating E A A
Number of Contacts 41 3 55 60
Contact Size 08 12 16 16
CONTACT LEGEND 16 12 8 4 0
12
34 5 67
8 9 10 11 12 13 14 15
16 17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32
33 34 35 36 37 38 39 40 41
42 43 44 45 46 47 48 49
50 51 52 53 54 55 56
57
58
59
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
3335
36
37
38
39
40
41
42
43
44
45
46
47
34
48
49
50
51
52
53
54
55
56
57
58
59
60
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17 18
19
20
21
22
23
24
25
26
27
28
29
30
3132
33
34
35
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23 24
25 26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43 44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
1
2
3
4
A B CD
EF H J K LM
N PRSTUVW
X YZ a b cdfg
h i j k mn p r
tu vw
s
x yz
q
AA AB
AC AD AE AF AH AJ AK AL AM AN
AP AR AS AT
AU AV AW AX AY
AZ BA BB
BV
BC BD BE BF BH
BJ BK BL BM BN
BS BT BU
BP BR
A
B
CD
E
H
K
G
J
F
L
Q
P
N
I
M
RS
O
V
Y
Z
W
U
X
b
a
c
T
AB
CDE
F
GHIJ
KL
MN O PQ
RST
UVWXY Za
bcd
efg h i
jk
lm
n
p
r
tu
s
o
q
ACA-B/GT Connectors
contact arrangements
75
26
front face of pin insert or rear face of socket insert illustrated
GT Series
contact arrangements
Insert Arrangement 40-63 40-64 40-66
Service Rating A – –
Number of Contacts 61 3 20 13 4
Contact Size 16 for #14 wire 12 16 8 (Coax) RG-124/U 0 (Coax) RG-63 B/U
Insert Arrangement 40-67 40-68 40-70
Service Rating A A A
Number of Contacts 1 10 21 61
Contact Size 16 4 (Coax) RG-59/U 816
Insert Arrangement 40-72 40-73 40-74
Service Rating A A A
Number of Contacts 1 10 61 11 4
Contact Size 8 4 (Coax) RG-9B/U 16 12 4 (Coax) RG-62/U 0 (Coax) RG-9B/U
or RG-214/U
CONTACT LEGEND 16 12 8 4 0
1
2
3
4
AB
CDE
FH J
KL
M
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
1
2345
6 7 8 9 10
11 12 13 14 15 16 17 18
19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35
36 37 38 39 40 41 42 43 44
45 46 47 48 49 50 51 52
53 54 55 56 57
58 59 60 61
AB
CDE
FH J
KL
M
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23 24
25 26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43 44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
1
2
34
5
6
A
B
C
D
E
F
H
J
K
L
M
N
P
RS
T
U
V
W
X
Y
Z
a
b
c
d
f
g
h
i
j
k
m
n
p
q
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23 24
25 26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43 44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
ACA-B/GT Connectors
contact arrangements
76
27
front face of pin insert or rear face of socket insert illustrated
GT Series
contact arrangements
Insert Arrangement 40-75 40-80 40-81
Service Rating E A A
Number of Contacts 41 10 1 62
Contact Size 0 12 4 16 16 for #14 wire
Insert Arrangement 40-82 40-85 40-86
Service Rating A A –
Number of Contacts 62 60 4
Contact Size 16 16 for #14 wire 0 (Coax) RG-115A/U
Insert Arrangement 40-87 40-AD 40-AG
Service Rating D A A
Number of Contacts 744 38
Contact Size 408 12
CONTACT LEGEND 16 12 8 4 0
1
2
3
4
5
AB
CDE
FH J
KL
M
12 34
5 6 7 8 9 10 11
12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28
29 30 31 32 33 34 35 36
37 38 39 40 41 42 43 44 45
46 47 48 49 50 51 52 53
54 55 56 57 58
59 60 61 62
1
2
3
4
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23 24
25 26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43 44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
12 34
5 6 7 8 9 10 11
12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28
29 30 31 32 33 34 35 36
37 38 39 40 41 42 43 44 45
46 47 48 49 50 51 52 53
54 55 56 57 58
59 60 61 62
1
2
3
45
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
A
B
H
GC
D
E
F
1
2
34
5
6
7
ACA-B/GT Connectors
contact arrangements
77
28
AB
A
BC
D
E
F
G
H
J
K
L
M
N
1
2
3
45
6
7
89
10
11
12
13
14
15
16
17
18
19
20
21
2223
24
25
26
27
28
29
30
31 32
33
34 35
36
37
38
39
40
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
2122
23
24
25
26 27 28 29
30 31 32 33
35 36 37 38
40 41 42 43
34 39
A
B
C
D
E
F
G
H
J
K
L
M
N
PAB
C
front face of pin insert or rear face of socket insert illustrated
GT Series
contact arrangements
Insert Arrangement 40-AP 40-AR 40-AS
Service Rating EInst. A
Number of Contacts 2337 25 15
Contact Size 4/0 0 4 12 12 16
Insert Arrangement 40-AT 40-AU 40 -AV
Service Rating A A D
Number of Contacts 1 24 18 3 10 1 3
Contact Size 8 12 16 4 8 16 2/0
CONTACT LEGEND 16 12 8 4 0 2/0 4/0
ACA-B/GT Connectors
contact arrangements
78
53
Amphenol ACA-B Connectors
how to order, connector intermateability
Part Number System
(example part number shown)
ACA 3100 E 10SL-3 P W B (F80)
1 23 4 56 7 8
1. Connector Series
ACA designates Amphenol® ACA-B Reverse Bayonet Series
2. Shell Style
3100 - Wall mount receptacle for front panel mounting
3101 - Cable connecting receptacle
3102 - Box mount receptacle (Class E only, see sect. 3)
3103 - Wall mount receptacle for rear panel mounting
3106 - Straight plug
3107 - Jam nut receptacle - rear panel mount
(Class A only, see sect. 3)
3108 - 90° angle plug
3. Connector Class
A Environmental, no rear threads (Applies to 3107 only)
E Environmental resisting, with grommet seal and
strain relief backshell
F Environmental resisting, with grommet seal and
solid backshell with rear accessory threads
G Backshell for heat shrink termination
R Environmental resisting with lightweight endbell
4. Shell Size and Insert Arrangement
See pages 2-4 for insert availability charts, and pages 6-24
for insert pattern drawings.
5. Contact Style
P designates pin contacts
S designates socket contacts
Note: standard contacts are silver plated. Consult Connector
Modification for ordering gold plated contacts.
6. Alternate Position
W, X, Y and Z - See page 5.
No suffix required for normal position.
7. Designation for Reverse Bayonet
B designates Reverse Bayonet coupling shells
8. Connector Modification
Omit for standard olive drab connectors with solder type sil-
ver plated contacts.
For a modification as listed below, add suffix in parenthesis
to the end of the part number. Consult Amphenol Industrial
Operations for further description or assistance.
(RDS) with Radsock contacts
(F80) with AWG crimp contacts
(FO) less contacts. (contacts are to be ordered
separately)
(A176) gold contacts
(T00) metric threads in flange holes
(RFI) grounded - plug only
(F42) less grommet and backshell
(F85) less sleeve and grommet
(A23) electroless nickel plating
(A232) with black zinc cobalt plating
MATEABILITY WITH
IDENTICAL CONTACT ARRANGEMENTS
This catalog is on the Amphenol website:
www.amphenol-industrial.com.
See www.amphenol-industrial.com and
www.amphenol-aerospace.com
for the broad range of interconnection products offered by
Amphenol.
Connector Style Mateable with Style
ACA3100 ACA 3106, 3108
ACA3101 ACA 3106, 3108
ACA3102 ACA 3106, 3108
ACA3103 ACA 3106, 3108
ACA3106 ACA 3100, 3101, 3102, 3103, 3107
ACA3107 ACA 3106, 3108
ACA3108 ACA 3100, 3101, 3102, 3103, 3107
®
(072) gray zinc nickel **NEW**
3101
53
Amphenol ACA-B Connectors
how to order, connector intermateability
Part Number System
(example part number shown)
ACA 3100 E 10SL-3 P W B (F80)
1 23 4 56 7 8
1. Connector Series
ACA designates Amphenol® ACA-B Reverse Bayonet Series
2. Shell Style
3100 - Wall mount receptacle for front panel mounting
3101 - Cable connecting receptacle
3102 - Box mount receptacle (Class E only, see sect. 3)
3103 - Wall mount receptacle for rear panel mounting
3106 - Straight plug
3107 - Jam nut receptacle - rear panel mount
(Class A only, see sect. 3)
3108 - 90° angle plug
3. Connector Class
A Environmental, no rear threads (Applies to 3107 only)
E Environmental resisting, with grommet seal and
strain relief backshell
F Environmental resisting, with grommet seal and
solid backshell with rear accessory threads
G Backshell for heat shrink termination
R Environmental resisting with lightweight endbell
4. Shell Size and Insert Arrangement
See pages 2-4 for insert availability charts, and pages 6-24
for insert pattern drawings.
5. Contact Style
P designates pin contacts
S designates socket contacts
Note: standard contacts are silver plated. Consult Connector
Modification for ordering gold plated contacts.
6. Alternate Position
W, X, Y and Z - See page 5.
No suffix required for normal position.
7. Designation for Reverse Bayonet
B designates Reverse Bayonet coupling shells
8. Connector Modification
Omit for standard olive drab connectors with solder type sil-
ver plated contacts.
For a modification as listed below, add suffix in parenthesis
to the end of the part number. Consult Amphenol Industrial
Operations for further description or assistance.
(RDS) with Radsock contacts
(F80) with AWG crimp contacts
(FO) less contacts. (contacts are to be ordered
separately)
(A176) gold contacts
(T00) metric threads in flange holes
(RFI) grounded - plug only
(F42) less grommet and backshell
(F85) less sleeve and grommet
(A23) electroless nickel plating
(A232) with black zinc cobalt plating
MATEABILITY WITH
IDENTICAL CONTACT ARRANGEMENTS
This catalog is on the Amphenol website:
www.amphenol-industrial.com.
See www.amphenol-industrial.com and
www.amphenol-aerospace.com
for the broad range of interconnection products offered by
Amphenol.
Connector Style Mateable with Style
ACA3100 ACA 3106, 3108
ACA3101 ACA 3106, 3108
ACA3102 ACA 3106, 3108
ACA3103 ACA 3106, 3108
ACA3106 ACA 3100, 3101, 3102, 3103, 3107
ACA3107 ACA 3106, 3108
ACA3108 ACA 3100, 3101, 3102, 3103, 3107
®
53
Amphenol ACA-B Connectors
how to order, connector intermateability
Part Number System
(example part number shown)
ACA 3100 E 10SL-3 P W B (F80)
1 23 4 56 7 8
1. Connector Series
ACA designates Amphenol® ACA-B Reverse Bayonet Series
2. Shell Style
3100 - Wall mount receptacle for front panel mounting
3101 - Cable connecting receptacle
3102 - Box mount receptacle (Class E only, see sect. 3)
3103 - Wall mount receptacle for rear panel mounting
3106 - Straight plug
3107 - Jam nut receptacle - rear panel mount
(Class A only, see sect. 3)
3108 - 90° angle plug
3. Connector Class
A Environmental, no rear threads (Applies to 3107 only)
E Environmental resisting, with grommet seal and
strain relief backshell
F Environmental resisting, with grommet seal and
solid backshell with rear accessory threads
G Backshell for heat shrink termination
R Environmental resisting with lightweight endbell
4. Shell Size and Insert Arrangement
See pages 2-4 for insert availability charts, and pages 6-24
for insert pattern drawings.
5. Contact Style
P designates pin contacts
S designates socket contacts
Note: standard contacts are silver plated. Consult Connector
Modification for ordering gold plated contacts.
6. Alternate Position
W, X, Y and Z - See page 5.
No suffix required for normal position.
7. Designation for Reverse Bayonet
B designates Reverse Bayonet coupling shells
8. Connector Modification
Omit for standard olive drab connectors with solder type sil-
ver plated contacts.
For a modification as listed below, add suffix in parenthesis
to the end of the part number. Consult Amphenol Industrial
Operations for further description or assistance.
(RDS) with Radsock contacts
(F80) with AWG crimp contacts
(FO) less contacts. (contacts are to be ordered
separately)
(A176) gold contacts
(T00) metric threads in flange holes
(RFI) grounded - plug only
(F42) less grommet and backshell
(F85) less sleeve and grommet
(A23) electroless nickel plating
(A232) with black zinc cobalt plating
MATEABILITY WITH
IDENTICAL CONTACT ARRANGEMENTS
This catalog is on the Amphenol website:
www.amphenol-industrial.com.
See www.amphenol-industrial.com and
www.amphenol-aerospace.com
for the broad range of interconnection products offered by
Amphenol.
Connector Style Mateable with Style
ACA3100 ACA 3106, 3108
ACA3101 ACA 3106, 3108
ACA3102 ACA 3106, 3108
ACA3103 ACA 3106, 3108
ACA3106 ACA 3100, 3101, 3102, 3103, 3107
ACA3107 ACA 3106, 3108
ACA3108 ACA 3100, 3101, 3102, 3103, 3107
®
53
Amphenol ACA-B Connectors
how to order, connector intermateability
Part Number System
(example part number shown)
ACA 3100 E 10SL-3 P W B (F80)
1 23 4 56 7 8
1. Connector Series
ACA designates Amphenol® ACA-B Reverse Bayonet Series
2. Shell Style
3100 - Wall mount receptacle for front panel mounting
3101 - Cable connecting receptacle
3102 - Box mount receptacle (Class E only, see sect. 3)
3103 - Wall mount receptacle for rear panel mounting
3106 - Straight plug
3107 - Jam nut receptacle - rear panel mount
(Class A only, see sect. 3)
3108 - 90° angle plug
3. Connector Class
A Environmental, no rear threads (Applies to 3107 only)
E Environmental resisting, with grommet seal and
strain relief backshell
F Environmental resisting, with grommet seal and
solid backshell with rear accessory threads
G Backshell for heat shrink termination
R Environmental resisting with lightweight endbell
4. Shell Size and Insert Arrangement
See pages 2-4 for insert availability charts, and pages 6-24
for insert pattern drawings.
5. Contact Style
P designates pin contacts
S designates socket contacts
Note: standard contacts are silver plated. Consult Connector
Modification for ordering gold plated contacts.
6. Alternate Position
W, X, Y and Z - See page 5.
No suffix required for normal position.
7. Designation for Reverse Bayonet
B designates Reverse Bayonet coupling shells
8. Connector Modification
Omit for standard olive drab connectors with solder type sil-
ver plated contacts.
For a modification as listed below, add suffix in parenthesis
to the end of the part number. Consult Amphenol Industrial
Operations for further description or assistance.
(RDS) with Radsock contacts
(F80) with AWG crimp contacts
(FO) less contacts. (contacts are to be ordered
separately)
(A176) gold contacts
(T00) metric threads in flange holes
(RFI) grounded - plug only
(F42) less grommet and backshell
(F85) less sleeve and grommet
(A23) electroless nickel plating
(A232) with black zinc cobalt plating
MATEABILITY WITH
IDENTICAL CONTACT ARRANGEMENTS
This catalog is on the Amphenol website:
www.amphenol-industrial.com.
See www.amphenol-industrial.com and
www.amphenol-aerospace.com
for the broad range of interconnection products offered by
Amphenol.
Connector Style Mateable with Style
ACA3100 ACA 3106, 3108
ACA3101 ACA 3106, 3108
ACA3102 ACA 3106, 3108
ACA3103 ACA 3106, 3108
ACA3106 ACA 3100, 3101, 3102, 3103, 3107
ACA3107 ACA 3106, 3108
ACA3108 ACA 3100, 3101, 3102, 3103, 3107
®
ACA 3101, 3102, 3103, 3107
ACA 3101, 3102, 3103, 3107
See www.amphenol-industrial.com
for the broad range of interconnection
products offered by Amphenol.
(RDS) with RADSOK® contacts (crimp sockets only)*
* Consult page 54 for RADSOK® Technology Advantages.
See pages 48-50 for insert availability charts, and
pages 55-77 for insert pattern drawings.
W, X, Y and Z - See page 51.
No sufx required for normal position.
79
GT Connectors
how to order, connector intermateability
Part Number System
GT C 00 A FF 36-5 P W (014)
1 2 3 4 5 6 7 8
1. Contact Style and Insert Material
C = Crimp
CN = Crimp with stainless steel
S = Solder
SN = Solder with stainless steel
CY = Crimp with Viton
SY = Solder with Viton
CL = Crimp with low smoke/ame retardant inserts
SL = Solder with low smoke/ame retardant inserts
No designation required for Neoprene components
2. Shell Style
01 - Inline receptacle
02 - Box mount receptacle
030 - Square ange receptacle - rear panel mount
05 - Dummy receptacle
06 - Straight plug
07 - Jam nut receptacle - rear panel mount
070 - Jam nut receptacle with accessory threads
08 - 90° angle plug
TB - Thru-bulkhead receptacle
3. Connector Class - For details, see pages 20-47
A - Adapter for accessory attachment, non-environmental
AF - Adapter, clamp for individual wires, non-environmental
AMI - Threaded internal adapter. Thread style/size to be specied
at the end of the PN - Ex (M20) or (PG21)
CF - Adapter, jacketed cable clamp, environmental
CFZ - Adapter, jacketed cable clamp, individual wire sealing
grommet, environmental
F - Adapter, clamp for individual wires, individual wire sealing
grommet, environmental.
G - Adapter for heat shrink tubing, individual wire sealing
grommet, environmental
GTTB - Thru bulkhead receptacle, accepts mating plug on both sides
R - Adapter for accessory attachment, individual wire sealing
grommet, environmental
R - (02) No thread, no accessories, environmental with panel
sealing gasket
RMI - Threaded internal adapter with individual wire sealing
grommet. Thread style/size to be specied at the end of the
PN - Es (M20) or (PG21)
RV - Adapter, individual wire sealing grommet, environmental
SB - Adapter for termination of EMI/RFI shielded braid with heat
shrink tubing or boot, individual wire sealing grommet,
environmental
4. Designation for Mounting Hole - Receptacle Only
FF - UN Threads
FM - Metric Threads
No designation for standard through hole mounting holes.
5. Shell Size and Arrangement
See pages 48-50
6. Contact Style
P designates pin contacts
S designates socket contacts
7. Alternate Position
W, X, Y and Z - See page 51.
No sufx required for normal position.
8. ConnectorModication*
Omit for standard olive drab with silver plated contacts
i.e.: (A31) Gold/nickel plated contacts
(025) Black zinc cobalt
(LC) Less contacts
(072) Gray Zinc Nickel
(116) Solder contacts less pre-lled solder
(724) Gray Zinc Nickel with solder contacts less
pre-lled solder **RoHS Compliant**
(RDS) RADSOK® contacts (crimp sockets only)*
* Consult page 54 for RADSOK® Technology Advantages.
MATEABILITY WITH
IDENTICAL CONTACT ARRANGEMENTS
Connector Style Mateable with Style
GT01 GT06 / 062 / 064 / 065 / 08
GT02 GT06 / 08
GT030 GT06 / 08
GT06 GT01 / 02 / 030 / 05 / 070 / TB
GT07 / 070 GT06 / 08
GT08 GT01 / 02 / 030 / 05 / 070 / TB
GTTB GT06 / 08
80
79
GT Connectors – accessories
10-40450, 10-36675, 10-580649 sealing gaskets
PLAIN FLAT GASKET
The Amphenol® plain flat gasket of synthetic rubber material
is provided to take complete advantage of waterproof and
pressure sealing features. It is for use with the flange
mounted receptacle.
SHIELDING GASKET
This flat gasket is provided to give the maximum in connector
performance. Its special feature is in providing the maximum
radio shielding under difficult conditions of high receiver sen-
sitivity and low signal strength while retaining the sealing
characteristics of the plain gasket. This gasket is for use with
the flange mounting receptacle.
LOW TEMPERATURE GASKET
This gasket is provided for applications where the major
requirement is resistance to the injurious effects of extremely
low temperature. Even at temperatures as low as –67°F this
gasket retains its resiliency and will seal a pressure differen-
tial of 30 psi.
Additional versions of gaskets are available including low
smoke zero halogen, and also high temperature and conduc-
tive types. Consult Amphenol lndustrial Operations, Sidney
NY, for further information.
Installation Dimensions
MS
Shell
Size
A
± .010
Front Panel
Versions
B
+ .016
– .000
Rear Panel
Version
B
+ .016
– .000
C
+ .016
– .000
D
± .010
10SL .719 .625 .724 1.000 .172
14S .906 .875 .976 1.188 .172
16S .969 1.000 1.087 1.281 .172
16 .969 1.000 1.087 1.281 .172
18 1.063 1.125 1.220 1.375 .203
20 1.156 1.250 1.354 1.500 .203
22 1.250 1.375 1.480 1.625 .203
24 1.375 1.500 1.618 1.750 .203
28 1.563 1.750 1.846 2.000 .203
32 1.750 2.000 2.110 2.250 .219
36 1.938 2.188 2.354 2.500 .219
40 2.188 2.438 2.587 2.750 .219
Installation Dimensions
MS
Shell
Size
A
± 0.2
Front Panel
Versions
B
+ 0.4
– 0.0
Rear Panel
Version
B
+ 0.4
– 0.0
C
+ 0.4
– 0.0
D
± 0.2
10SL 18.2 15.9 18.4 25.4 4.36
14S 23.0 22.2 24.8 30.2 4.36
16S 24.6 25.4 27.6 32.5 4.36
16 24.6 25.4 27.6 32.5 4.36
18 27.0 28.57 31.0 35.0 5.15
20 29.4 31.75 34.4 38.1 5.15
22 31.8 34.9 37.6 41.2 5.15
24 34.9 38.1 41.1 44.5 5.15
28 39.7 44.45 46.9 50.8 5.15
32 44.5 50.8 53.6 57.2 5.56
36 49.2 55.57 59.8 63.5 5.56
40 55.6 61.92 65.7 69.9 5.56
Order Data for
Front Panel Mount Gaskets
Front Panel
Plain Version
Front Panel
Shielding Version
Front Panel
Low Temperature
Version
Front Panel
Low Smoke ZH
Version
10-40450-10 10-40450-10S 10-36675-10 LS-40450-10
10-40450-14 10-40450-14S 10-36675-14 LS-40450-14
10-40450-16 10-40450-16S 10-36675-16 LS-40450-16
10-40450-18 10-40450-18S 10-36675-18 LS-40450-18
10-40450-20 10-40450-20S 10-36675-20 LS-40450-20
10-40450-22 10-40450-22S 10-36675-22 LS-40450-22
10-40450-24 10-40450-24S 10-36675-24 LS-40450-24
10-40450-28 10-40450-28S 10-36675-28 LS-40450-26
10-40450-32 10-40450-32S 10-36675-32 LS-40450-32
10-40450-36 10-40450-36S 10-36675-36 LS-40450-36
10-40450-40 10-40450-40S 10-36675-40 LS-40450-40
Order Data for
Rear Panel Mount Gaskets
Rear Panel
Plain Version
Rear Panel
Low Smoke ZH
Version
10-580649-11 LS-580649-11
10-580649-14 LS-580649-14
10-580649-16 LS-580649-16
10-580649-18 LS-580649-18
10-580649-20 LS-580649-20
10-580649-22 LS-580649-22
10-580649-24 LS-580649-24
10-580649-26 LS-580649-26
10-580649-32 LS-580649-32
10-580649-36 LS-580649-36
10-580649-40 LS-580649-40
C
A
C
A
B
D
4 HOLES
.031± .010
.08 ± 0.3 mm
.020 ± .004
0.5 ± 0.1 mm
SHIELDING
.031 ± .010
0.8 ± 0.3 mm
LOW
TEMPERATURE
ACA-B/GT Connectors – accessories
2828
81
ACA-B/GT Connectors – accessories
receptacle protection caps
* To complete order number, add shell size and sufx number. For
example, shell size 11 with olive drab cadmium plate would be
10-580902-113.
Table 1: Inches
Shell
Size
D
+ .020
– .000
L
Max.
N
Max.
LL
Approx.
11 .173 .700 .905 5.000
14 .173 .700 1.181 5.000
16 .173 .700 1.280 5.000
17 .173 .900 1.280 5.000
18 .173 .900 1.457 5.000
20 .173 .900 1.594 5.000
22 .173 .900 1.713 5.000
24 .173 .900 1.850 5.000
28 .220 .900 2.126 7.480
32 .261 .900 2.382 7.480
36 .261 .900 2.638 7.480
40 .261 .900 2.874 7.480
Table 2: Millimeters
Shell
Size
D
+ 0.5
– 0.0
L
Max.
N
Max.
LL
Approx.
11 4.4 17.8 23.0 127
14 4.4 17.8 30.0 127
16 4.4 17.8 32.5 127
17 4.4 22.9 32.5 127
18 4.4 22.9 37.0 127
20 4.4 22.9 40.5 127
22 4.4 22.9 43.5 127
24 4.4 22.9 47.0 127
28 5.6 22.9 54.0 190
32 5.6 22.9 60.5 190
36 5.6 22.9 67.0 175
40 5.6 22.9 73.0 190
All dimensions for reference only.
Finish Sufx
Olive drab cadmium plate -XX3
Electroless nickel -XXG
Black zinc cobalt -XXY
Gray zinc nickel -XXFL
• Protective metal caps which seal the front of receptacles
• Includes a chain for retention of the cap at the required
location
• All ACA( )-B and GT receptacles
* 10-580902-XXX
D
LL
L
N
82
ACA-B/GT Connectors – accessories
plug protection caps
• Protective metal caps which seal the front of plugs
• Includes a chain for retention of the cap at the required
location
• All ACA( )-B and GT plugs
* To complete order number, add shell size and sufx number. For
example, shell size 11 with olive drab cadmium plate would be
10-580903-113.
Table 1: Inches
Shell
Size
D
+ .020
– .000
L
Max.
N
Max.
LL
Approx.
11 .157 .945 .807 5.000
14 .157 .945 1.059 5.000
16 .157 .945 1.169 5.000
17 .157 1.260 1.169 5.000
18 .157 1.260 1.303 5.000
20 .189 1.260 1.437 5.520
22 .189 1.260 1.563 5.520
24 .189 1.260 1.701 5.520
28 .220 1.260 1.929 7.480
32 .261 1.260 2.193 7.480
36 .261 1.260 2.437 7.480
40 .261 1.260 2.665 7.480
Table 2: Millimeters
Shell
Size
D
+ 0.5
– 0.0
L
Max.
N
Max.
LL
Approx.
11 4.0 24 20.5 127
14 4.0 24 26.9 127
16 4.0 24 29.7 127
17 4.0 24 29.7 127
18 4.0 24 33.1 127
20 4.8 32 36.5 140
22 4.8 32 39.7 140
24 4.8 32 43.2 140
28 4.8 32 49.0 190
32 5.6 32 55.7 190
36 5.6 32 61.9 190
40 5.6 32 67.7 190
All dimensions for reference only.
Finish Sufx
Olive drab cadmium plate -XX3
Electroless nickel -XXG
Black zinc cobalt -XXY
Gray zinc nickel -XXFL
* 10-580903-XXX
D
LL
N
L
83
85
GT – accessories
rear mounting data, panel cut-out dimensions,
sealing plugs, sealing ranges
REAR MOUNTING DATA
MAXIMUM PANEL THICKNESS
Size
Dimension D
GT00/020 GT030
Inches (mm) Inches (mm)
10SL .146 3.70 .303 7.70
14S .146 3.70 .303 7.70
16S .146 3.70 .303 7.70
16 .145 3.70 .242 6.15
18 .145 3.70 .303 7.70
20 .145 3.70 .303 7.70
22 .145 3.70 .303 7.70
24 .207 5.25 .303 7.70
28 .207 5.25 .343 8.70
32 .241 6.10 .309 7.85
36 .241 6.10 .309 7.85
40 .237 6.02 .309 7.85
PANEL CUT-OUT DIMENSIONS
Shell
Size
A Dia.
Hole
Size
Connector Styles
02, 020,
00, 030
Front
Mount
02, 00,
020
Rear
Mount
030
Jam Nut
070
Jam Nut
070
B ±.004 C Dia. C Dia. D Dia. E
10SL .126 .717 11/16 1 3/4 7/8 .83
14S .126 .906 13/16 1 1 1/8 1.08
16S/16 .126 .969 15/16 1 1/8 1 1/14 1.21
18 .126 1.063 1 1/16 1 1/4 1 3/8 1.32
20 .126 1.157 1 3/16 1 3/8 1 1/2 1.45
22 .126 1.252 1 5/16 1 1/2 1 5/8 1.57
24 .146 1.374 1 7/16 1 5/8 1 3/4 1.70
28 .146 1.563 1 11/16 1 7/8 2 1.95
32 .169 1.752 1 15/16 2 1/8 2 1/4 2.20
36 .169 1.937 2 1/8 2 3/8 2 1/2 2.45
40 .169 2.185 2 3/8 2 5/8 2 3/4 2.70
SEALING PLUG
10-405996-XX
Sealing plugs are used
to fill unused holes in
multi-holed grommet
configurations.
GROMMET HOLE
SEALING RANGES
Hole
Size
Sealing Range
(mm) Inches
16 1.62 – 3.3 .064 – .130
12 2.89 – 4.31 .114 – .170
8 4.16 – 6.47 .164 – .255
4 6.9 – 9.3 .272 – .370
0 10.5 – 13.97 .415 – .550
** ± .020 (in.) *** ± 0.5 (mm)
Order No.
Contact
Size
Wire
Size
Color
Code
Inches
A Dia.
±.010
B
±.005
C
±.010
10-405996-16 16 20-16 Blue .083 .133 .564**
10-405996-12 12 14-12 Yellow .121 .171 .564**
10-405996-8 8 10-8 Red .185 .315 .470
10-405996-4 4 4-6 Blue .310 .415 .470
10-405996-0 0 0-2 Yellow .440 .605 1.000
Millimeters
A Dia.
± 0.2
B
± 0.1
C
± 0.2
2.1 3.4 14.3***
3.1 4.3 14.3***
4.7 8.0 11.9
7.9 10.5 11.9
11.2 15.4 25.4
All dimensions for reference only.
D MAX.
B
DIA.
A
DIA.
45O
C
.135
3.4 + 0.8
– 0.6 mm
+.030
–.025 in.
B
TYP.
C DIA.
A DIA.
E
TYP.
D
DIA.
ACA-B/GT Connectors - accessories
84
82
GT Connectors – accessories
MS3057-A style cable clamp
All dimensions for reference only.
Inches
Part
Number
Used with
Shell Size
Used with
Bushing B D G F
V
Thread
Class 2B
97-3057-1004 10SL MS3420-4 .315 .395 .812 .866 .6250-24 UNEF
97-3057-1007 14S MS3420-6 .442 .395 .875 1.063 .7500-20 UNEF
97-3057-1008 16 - 16S MS3420-8 .568 .395 .945 1.145 .8750-20 UNEF
97-3057-1010 18 MS3420-10 .633 .395 .945 1.244 1.0000-20 UNEF
97-3057-1012 20 - 22 MS3420-12 .758 .395 .945 1.475 1.1875-18 UNEF
97-3057-1016 24 - 28 MS3420-16 .948 .395 1.031 1.700 1.4375-18 UNEF
97-3057-1020 32 MS3420-20 1.256 .460 1.094 2.055 1.7500-18 UNS
97-3057-1024 36 MS3420-24 1.380 .520 1.157 2.265 2.0000-18 UNS
10-824810-028 40 MS3420-28 1.625 .520 1.685 2.683 2.2500-16 UN
Millimeters
Part
Number
Used with
Shell Size
Used with
Bushing B D G F
97-3057-1004 10SL MS3420-4 8.0 10.0 20.6 22
97-3057-1007 14S MS3420-6 11.0 10.0 22.2 27
97-3057-1008 16 - 16S MS3420-8 14.4 10.0 24.0 29
97-3057-1010 18 MS3420-10 16.1 10.0 24.0 32
97-3057-1012 20 - 22 MS3420-12 19.2 10.0 24.0 37
97-3057-1016 24 - 28 MS3420-16 24.1 10.0 26.2 43
97-3057-1020 32 MS3420-20 31.9 11.7 27.8 52
97-3057-1024 36 MS3420-24 35.0 13.2 29.4 58
10-824810-028 40 MS3420-28 41.3 13.2 42.8 68
• Concentric cable clamps, insure strain relief and central
location of the cable
• Can be used with bushing MS3420
B
Q
F
E
V
G
D
85
83
GT Connectors – accessories
MS3420 bushing
All dimensions for reference only.
Inches
Part
Number
Used with
Cable Clamp A B C D
MS3420-3 M85049/41-3A .130 .210 .379 2.875
MS3420-4 M85049/41-4A .220 .302 .505 2.750
MS3420-6 M85049/41-6A .312 .427 .619 2.625
MS3420-8 M85049/41-8A .437 .552 .744 2.500
MS3420-10 M85049/41-10A .562 .615 .889 2.375
MS3420-12 M85049/41-12A .625 .740 1.084 2.250
MS3420-16 M85049/41-16A .750 .927 1.314 2.125
MS3420-20 M85049/41-20A .937 1.240 1.598 2.000
MS3420-24 M85049/41-24A 1.250 1.365 1.847 1.875
MS3420-28 M85049/41-28A 1.375 1.614 2.085 1.750
Millimeters
Part
Number
Used with
Cable Clamp A B C D
MS3420-3 M85049/41-3A 3.30 5.3 9.60 73.0
MS3420-4 M85049/41-4A 5.58 7.7 12.80 69.8
MS3420-6 M85049/41-6A 7.92 10.8 15.70 66.8
MS3420-8 M85049/41-8A 11.09 14.0 18.90 63.5
MS3420-10 M85049/41-10A 14.27 15.6 22.58 60.3
MS3420-12 M85049/41-12A 15.87 18.8 27.50 57.1
MS3420-16 M85049/41-16A 19.05 23.5 33.40 53.9
MS3420-20 M85049/41-20A 23.79 31.5 40.60 50.8
MS3420-24 M85049/41-24A 31.75 34.7 46.90 47.6
MS3420-28 M85049/41-28A 34.92 41.0 52.90 44.4
• Bushing of synthetic rubber to be used with cable clamps
for protection of the cable or wires
• Can be telescoped for smaller cable diameters
A
C
D
1.6mm
.062 in.
B
86
84
GT Connectors – accessories
MS3057-C style (10-350349) cable clamp
Part
Number
Used with
Shell Size
A Thread
Class 2B
in inches
V Thread
Class 2A
in inches
Used with
Bushing
Bushing Opening
Inches
Busing Opening
Millimeters
Open Closed Open Closed
10-350349-123 10SL .6250-24 UNEF 6-32 UNC MS3420-4A .219 .010 5.56 0.25
10-350349-143 14S .7500-20 UNEF 6-32 UNC MS3420-6A
MS3420-4A
.312
.219
.114
.020
7.93
5.56
2.89
0.50
10-350349-163 16 & 16S .8750-20 UNEF 6-32 UNC MS3420-8A
MS3420-6A
.437
.312
.220
.085
11.10
7.93
5.60
2.15
10-350349-183 18 1.0000-20 UNEF 6-32 UNC MS3420-10A
MS3420-6A
.437
.312
.197
.085
11.10
7.93
5.00
2.15
10-350349-203 20 & 22 1.1875-18 UNEF 8-32 UNC MS3420-12A
MS3420-8A
.541
.437
.270
.177
13.74
11.10
6.85
4.50
10-350349-243 24 & 28 1.4375-18 UNEF 8-32 UNC
MS3420-16A
MS3420-12A
MS3420-8A
.748
.541
.437
.429
.260
.186
19.00
13.74
11.10
10.90
6.60
4.72
10-350349-323 32 1.7500-18 UNS .250-20 UNC
MS3420-20A
MS3420-16A
MS3420-12A
.937
.748
.541
.620
.441
.273
23.80
19.00
13.74
15.74
11.20
6.93
10-350349-363 36 2.0000-18 UNS .250-20 UNC
MS3420-24A
MS3420-20A
MS3420-16A
1.122
.937
.748
.681
.504
.358
28.50
23.80
19.00
17.30
12.80
9.10
10-350349-403 40 2.2500-16 UN .250-20 UNC
MS3420-28A
MS3420-20A
MS3420-16A
1.250
.937
.748
.815
512
368
31.75
23.80
19.00
20.70
13.00
9.34
All dimensions for reference only.
Inches
Part
Number
Used with
Shell Size
B
E
± .016
F
± .008
G
+ .020
– .000Open Closed
10-350349-123 10SL .312 .094 .748 .890 1.272
10-350349-143 14S .438 .230 .874 1.016 1.272
10-350349-163 16 & 16S .531 .315 1.000 1.106 1.272
10-350349-183 18 .625 .378 1.122 1.220 1.390
10-350349-203 20 & 22 .748 .445 1.311 1.469 1.406
10-350349-243 24 &28 .937 .610 1.559 1.654 1.516
10-350349-323 32 1.250 .921 1.874 2.126 1.764
10-350349-363 36 1.378 .921 2.122 2.248 2.031
10-350349-403 40 1.624 1.177 2.374 2.500 2.031
Millimeters
B
E
± 0.4
F
± 0.2
G
+ 0.5
– 0.0Open Closed
7.93 2.38 19.0 22.6 32.3
11.12 5.84 22.2 25.8 32.3
13.48 8.00 25.4 28.1 32.3
15.87 9.60 28.5 31.0 35.3
19.00 11.30 33.3 37.3 35.7
23.80 15.50 39.6 42.0 38.5
31.75 23.40 47.6 54.0 44.8
35.00 23.40 53.9 57.1 51.6
41.25 29.90 60.3 63.5 51.6
• Waterproof clamp for jacketed cables
• Provides mechanical strain relief plus concentric clamping over a
wide range of cable sizes
• A neoprene* gland seal ensures a waterproof seal on the cable jacket
* Other materials available
F
V
E
B
GA
To reduce diameter B, use
rubber brushing MS3420A
87
ACA-B/GT accessories
glands
Nylon Cable Glands
Material: Nylon 66 (UL Approved 94V-2)
Seal Ring: UL 94V-2(UL Approved 94V-2)
Thread Type: Metric , PG, NPT
Temp Range: Static: - 40°C ∼+100°C
Dynamic: - 20°C ∼+ 80°C
Short Term: +120°C
Current Colors: Gray, Black
Metal Cable Glands
Material: Brass with Nickel; Brass with Tin/Nickel
Clamping: UL approved PA6, 94V-0
Seal Ring: UL 94V-2 (UL approved NBR, 94V-2;UL approved
DOW CORNING RUBBER, 94V-0
Thread Type: Metric, PG, NPT
Protective: IP68 (tighten with o-ring)
Temp Range: - 40°C ∼+100°C
Torque Value (N-M) to tighten the fitting to the flexible cord: 6.25N-M
Torque Value (N-M) to tighten the fitting to the threaded hub: 4.17N-M
M12, M16, M20 are UL recognized under file # E339605
For additional information on other products available
refer to our Cord Grips & Cable Glands, Catalog 12-055.
15
19
22
24
27
27
33
33
42
42
54
60
80
24
33
54
54
24
33
42
54
54
80
15
19
22
24
27
33
42
54
60
AIO-CSPG42
PG42
38
32 – 38
14
52
AIO-CSPG36
PG36
32
22 – 32
13
48
AIO-CSPG29
PG29
25
18 – 25
11
38
AIO-CSPG21
PG21
18
13 – 18
11
33
AIO-CSPG16
PG16
14
10 – 14
10
28
AIO-CSPG13.5
PG13.5
12
6 – 12
9
26
AIO-CSPG11
PG11
10
5 – 10
8
24
AIO-CSPG9
PG9
8
4 – 8
8
22
AIO-CSPG7
PG7
6.5
3 – 6.5
8
20
AIO-CSGIN5/2
G2”1/2”
57
51 – 57
14
75
AIO-CSGIN3/2
G1”1/2”
32
22 – 32
13
48
AIO-CSGIN5/4
G1”1/4”
28
21 – 28
13
48
AIO-CSGIN1
G1”
25
18 – 25
11
33
AIO-CSGIN3/4
G3/4”
18
13 – 18
11
27
AIO-CSGIN1/2
G1/2”
12
6 – 12
9
26
AIO-CSIN3/2
NPT1”1/2”
32
22 – 32
17.3
50
AIO-CSIN5/4
NPT1”1/4”
32
22 – 32
17.3
46
AIO-CSIN3/4
NPT3/4”
18
13 – 18
14.1
32
AIO-CSIN1/2
NPT1/2”
12
6 – 12
13.6
28
AIO-CSM72
M72 2.0
57
51 – 57
16
75
AIO-CSM50
M50 1.5
38
32 – 38
14
50
AIO-CSM40
M40 1.5
32
22 – 32
13
48
AIO-CSM33
M33 2.0
25
18 – 25
11
39
AIO-CSM32
M32 1.5
25
18 – 25
11
38
AIO-CSM30
M30 2.0
18
13 – 18
11
33
AIO-CSM25
M25x1.5
18 13 – 18
10
30
AIO-CSM24
M24 1.5
14
10 – 14
10
30
AIO-CSM22
M22 1.5
14
10 – 14
10
30
AIO-CSM20
M20 1.5
12
6 – 12
9
30
AIO-CSM18
M18 1.5
10
5 – 10
9
25
AIO-CSM16
M16x1.5
8
4 – 8
8
22
Spanner "S"
(mm)
AIO-CSM12
M12x1.5
8
3 – 6.5
8
20
AIGO Part
Thread “A”
Max ”d”
(mm)
Cable Range
(mm)
Thread “L”
(mm)
Clamp ”H”
(mm)
Metal Cable Glands
Nylon Cable Glands
14
15
18
22
22
24
27
30
30
32
40
40
50
60
67
75
90
100
24
30
50
50
65
80
100
24
30
40
50
50
65
82
100
14
18
22
20
22
24
30
50
60
65
AIO-CSJPG48
PG48
44
37 – 44
12
44
AIO-CSJPG42
PG42
38
32 – 38
11
42
AIO-CSJPG36
PG36
32
22 – 32
10
38
AIO-CSJPG21
PG21
18
13 – 18
8
26
AIO-CSJPG16
PG16
14
10 – 14
8
25
AIO-CSJPG13.5
PG13.5
12
6 – 12
8
24
AIO-CSJPGM16
M16x1.5
10
6.2 – 10
6.5
22
AIO-CSJPG11
PG11
10
5 – 10
7
20
AIO-CSJPG9
PG9
8
4 – 8
7
21
AIO-CSJPG7
PG7
6.5
3 – 6.5
6
18
AIO-CSJGIN3
G3”
70
62 – 70
20
55
AIO-CSJGIN5/2
G2 1/2”
52
46 – 52
16
47
AIO-CSJGIN2
G2”
44
37 – 44
12
44
AIO-CSJGIN3/2
G1”1/2”
32
22 – 32
10
39
AIO-CSJGIN5/4
G1”1/4”
32
22 – 32
10
39
AIO-CSJGIN1
G1”
25
18 – 25
10
34
AIO-CSJGIN3/4
G3/4”
18
13 – 18
8
27
AIO-CSJGIN1/2
G1/2”
12
6 – 12
8
24
AIO-CSJIN3
NPT3”
70
62 – 70
26
58
AIO-CSJIN5/2
NPT2 1/2”
52
46 – 52
23.7
58
AIO-CSJIN2
NPT2”
44
37 – 44
17.7
46
AIO-CSJIN3/2
NPT1”1/2”
32
22 – 32
17.3
46
AIO-CSJIN5/4
NPT1”1/4”
32
22 – 32
17.3
41
AIO-CSJIN3/4
NPT3/4”
18
13 – 18
14.1
26
AIO-CSJIN1/2
NPT1/2”
12
6 – 12
13.6
25
AIO-CSJM90
M90 2.0
70
62 – 70
20
57
AIO-CSJM80
M80 2.0
60
52 – 60
20
57
AIO-CSJM72
M72 2.0
52
46 – 52
16
47
AIO-CSJM63
M63 1.5
44
37 – 44
12
43
AIO-CSJM50
M50 1.5
38
32 – 38
11
39
AIO-CSJM40
M40 1.5
32
22 – 32
10
39
AIO-CSJM36
M36 2.0
25
18 – 25
10
34
AIO-CSJM32
M32 1.5
25
18 – 25
10
27
AIO-CSJM30
M30 2.0
18
13 – 18
8
26
AIO-CSJM27
M27 2.0
18
13 – 18
8
26
AIO-CSJM25
M25x1.5
18
13 – 18
7.8
23
AIO-CSJM24
M24 1.5
14
10 – 14
8
24
AIO-CSJM22
M22 1.5
14
10 – 14
8
24
AIO-CSJM20
M20x1.5
12
6 – 12
8.3
20
AIO-CSJM18
M18x1.5
10
5 – 10
7
20
AIO-CSJM16
M16x1.5
9
6 – 9
6.3
20
AIO-CSJM14
M14x1.5
8
4 – 8
5
19
Spanner "S"
(mm)
AIO-CSJM12
M12x1.5
6.5
3 – 6.5
6.2
15
AIGO Part
Thread “A”
Max ”d”
(mm)
Cable Range
(mm)
Thread “L”
(mm)
Clamp ”H”
(mm)
Torque Value (N-M) of hex and cap nuts: 3.0-4.5 N-M
M12, M16, M20 are UL recognized under le # E339605
Nylon Cable Glands
Material: Nylon 66 (UL Approved 94V-2)
Seal Ring: UL 94V-2(UL Approved 94V-2)
Thread Type: Metric , PG, NPT
Temp Range: Static: - 40°C ∼+100°C
Dynamic: - 20°C ∼+ 80°C
Short Term: +120°C
Current Colors: Gray, Black
Metal Cable Glands
Material: Brass with Nickel; Brass with Tin/Nickel
Clamping: UL approved PA6, 94V-0
Seal Ring: UL 94V-2 (UL approved NBR, 94V-2;UL approved
DOW CORNING RUBBER, 94V-0
Thread Type: Metric, PG, NPT
Protective: IP68 (tighten with o-ring)
Temp Range: - 40°C ∼+100°C
Torque Value (N-M) to tighten the fitting to the flexible cord: 6.25N-M
Torque Value (N-M) to tighten the fitting to the threaded hub: 4.17N-M
M12, M16, M20 are UL recognized under file # E339605
For additional information on other products available
refer to our Cord Grips & Cable Glands, Catalog 12-055.
15
19
22
24
27
27
33
33
42
42
54
60
80
24
33
54
54
24
33
42
54
54
80
15
19
22
24
27
33
42
54
60
AIO-CSPG42
PG42
38
32 – 38
14
52
AIO-CSPG36
PG36
32
22 – 32
13
48
AIO-CSPG29
PG29
25
18 – 25
11
38
AIO-CSPG21
PG21
18
13 – 18
11
33
AIO-CSPG16 PG16 14 10 – 14 10 28
AIO-CSPG13.5
PG13.5
12
6 – 12
9
26
AIO-CSPG11
PG11
10
5 – 10
8
24
AIO-CSPG9
PG9
8
4 – 8
8
22
AIO-CSPG7
PG7
6.5
3 – 6.5
8
20
AIO-CSGIN5/2
G2”1/2”
57
51 – 57
14
75
AIO-CSGIN3/2
G1”1/2”
32
22 – 32
13
48
AIO-CSGIN5/4
G1”1/4”
28
21 – 28
13
48
AIO-CSGIN1
G1”
25
18 – 25
11
33
AIO-CSGIN3/4
G3/4”
18
13 – 18
11
27
AIO-CSGIN1/2
G1/2”
12
6 – 12
9
26
AIO-CSIN3/2
NPT1”1/2”
32
22 – 32
17.3
50
AIO-CSIN5/4 NPT1”1/4” 32 22 – 32 17.3 46
AIO-CSIN3/4
NPT3/4”
18
13 – 18
14.1
32
AIO-CSIN1/2
NPT1/2”
12
6 – 12
13.6
28
AIO-CSM72
M72 2.0
57
51 – 57
16
75
AIO-CSM50
M50 1.5
38
32 – 38
14
50
AIO-CSM40
M40 1.5
32
22 – 32
13
48
AIO-CSM33
M33 2.0
25
18 – 25
11
39
AIO-CSM32
M32 1.5
25
18 – 25
11
38
AIO-CSM30
M30 2.0
18
13 – 18
11
33
AIO-CSM25
M25x1.5
18 13 – 18
10
30
AIO-CSM24
M24 1.5
14
10 – 14
10
30
AIO-CSM22
M22 1.5
14
10 – 14
10
30
AIO-CSM20
M20 1.5
12
6 – 12
9
30
AIO-CSM18 M18 1.5 10 5 – 10 9 25
AIO-CSM16
M16x1.5
8
4 – 8
8
22
Spanner "S"
(mm)
AIO-CSM12
M12x1.5
8
3 – 6.5
8
20
AIGO Part Thread “A” Max ”d”
(mm)
Cable Range
(mm)
Thread “L”
(mm)
Clamp ”H”
(mm)
Metal Cable Glands
Nylon Cable Glands
14
15
18
22
22
24
27
30
30
32
40
40
50
60
67
75
90
100
24
30
50
50
65
80
100
24
30
40
50
50
65
82
100
14
18
22
20
22
24
30
50
60
65
AIO-CSJPG48
PG48
44
37 – 44
12
44
AIO-CSJPG42
PG42
38
32 – 38
11
42
AIO-CSJPG36
PG36
32
22 – 32
10
38
AIO-CSJPG21
PG21
18
13 – 18
8
26
AIO-CSJPG16
PG16
14
10 – 14
8
25
AIO-CSJPG13.5
PG13.5
12
6 – 12
8
24
AIO-CSJPGM16
M16x1.5
10
6.2 – 10
6.5
22
AIO-CSJPG11
PG11
10
5 – 10
7
20
AIO-CSJPG9
PG9
8
4 – 8
7
21
AIO-CSJPG7
PG7
6.5
3 – 6.5
6
18
AIO-CSJGIN3
G3”
70
62 – 70
20
55
AIO-CSJGIN5/2
G2 1/2”
52
46 – 52
16
47
AIO-CSJGIN2
G2”
44
37 – 44
12
44
AIO-CSJGIN3/2
G1”1/2”
32
22 – 32
10
39
AIO-CSJGIN5/4
G1”1/4”
32
22 – 32
10
39
AIO-CSJGIN1 G1” 25 18 – 25 10 34
AIO-CSJGIN3/4
G3/4”
18
13 – 18
8
27
AIO-CSJGIN1/2
G1/2”
12
6 – 12
8
24
AIO-CSJIN3
NPT3”
70
62 – 70
26
58
AIO-CSJIN5/2
NPT2 1/2”
52
46 – 52
23.7
58
AIO-CSJIN2 NPT2” 44 37 – 44 17.7 46
AIO-CSJIN3/2
NPT1”1/2”
32
22 – 32
17.3
46
AIO-CSJIN5/4
NPT1”1/4”
32
22 – 32
17.3
41
AIO-CSJIN3/4
NPT3/4”
18
13 – 18
14.1
26
AIO-CSJIN1/2
NPT1/2”
12
6 – 12
13.6
25
AIO-CSJM90 M90 2.0 70 62 – 70 20 57
AIO-CSJM80
M80 2.0
60
52 – 60
20
57
AIO-CSJM72
M72 2.0
52
46 – 52
16
47
AIO-CSJM63
M63 1.5
44
37 – 44
12
43
AIO-CSJM50
M50 1.5
38
32 – 38
11
39
AIO-CSJM40 M40 1.5 32 22 – 32 10 39
AIO-CSJM36
M36 2.0
25
18 – 25
10
34
AIO-CSJM32
M32 1.5
25
18 – 25
10
27
AIO-CSJM30
M30 2.0
18
13 – 18
8
26
AIO-CSJM27
M27 2.0
18
13 – 18
8
26
AIO-CSJM25 M25x1.5 18 13 – 18 7.8 23
AIO-CSJM24
M24 1.5
14
10 – 14
8
24
AIO-CSJM22
M22 1.5
14
10 – 14
8
24
AIO-CSJM20
M20x1.5
12
6 – 12
8.3
20
AIO-CSJM18
M18x1.5
10
5 – 10
7
20
AIO-CSJM16 M16x1.5 9 6 – 9 6.3 20
AIO-CSJM14
M14x1.5
8
4 – 8
5
19
Spanner "S"
(mm)
AIO-CSJM12
M12x1.5
6.5
3 – 6.5
6.2
15
AIGO Part Thread “A”
Max ”d”
(mm)
Cable Range
(mm)
Thread “L”
(mm)
Clamp ”H”
(mm)
Nylon Cable Glands
Material: Nylon 66 (UL Approved 94V-2)
Seal Ring: UL 94V-2(UL Approved 94V-2)
Thread Type: Metric , PG, NPT
Temp Range: Static: - 40°C ∼+100°C
Dynamic: - 20°C ∼+ 80°C
Short Term: +120°C
Current Colors: Gray, Black
Metal Cable Glands
Material: Brass with Nickel; Brass with Tin/Nickel
Clamping: UL approved PA6, 94V-0
Seal Ring: UL 94V-2 (UL approved NBR, 94V-2;UL approved
DOW CORNING RUBBER, 94V-0
Thread Type: Metric, PG, NPT
Protective: IP68 (tighten with o-ring)
Temp Range: - 40°C ∼+100°C
Torque Value (N-M) to tighten the fitting to the flexible cord: 6.25N-M
Torque Value (N-M) to tighten the fitting to the threaded hub: 4.17N-M
M12, M16, M20 are UL recognized under file # E339605
For additional information on other products available
refer to our Cord Grips & Cable Glands, Catalog 12-055.
15
19
22
24
27
27
33
33
42
42
54
60
80
24
33
54
54
24
33
42
54
54
80
15
19
22
24
27
33
42
54
60
AIO-CSPG42
PG42
38
32 – 38
14
52
AIO-CSPG36
PG36
32
22 – 32
13
48
AIO-CSPG29
PG29
25
18 – 25
11
38
AIO-CSPG21
PG21
18
13 – 18
11
33
AIO-CSPG16 PG16 14 10 – 14 10 28
AIO-CSPG13.5
PG13.5
12
6 – 12
9
26
AIO-CSPG11
PG11
10
5 – 10
8
24
AIO-CSPG9
PG9
8
4 – 8
8
22
AIO-CSPG7
PG7
6.5
3 – 6.5
8
20
AIO-CSGIN5/2
G2”1/2”
57
51 – 57
14
75
AIO-CSGIN3/2
G1”1/2”
32
22 – 32
13
48
AIO-CSGIN5/4
G1”1/4”
28
21 – 28
13
48
AIO-CSGIN1
G1”
25
18 – 25
11
33
AIO-CSGIN3/4
G3/4”
18
13 – 18
11
27
AIO-CSGIN1/2
G1/2”
12
6 – 12
9
26
AIO-CSIN3/2
NPT1”1/2”
32
22 – 32
17.3
50
AIO-CSIN5/4
NPT1”1/4”
32
22 – 32
17.3
46
AIO-CSIN3/4
NPT3/4”
18
13 – 18
14.1
32
AIO-CSIN1/2
NPT1/2”
12
6 – 12
13.6
28
AIO-CSM72
M72 2.0
57
51 – 57
16
75
AIO-CSM50
M50 1.5
38
32 – 38
14
50
AIO-CSM40
M40 1.5
32
22 – 32
13
48
AIO-CSM33
M33 2.0
25
18 – 25
11
39
AIO-CSM32
M32 1.5
25
18 – 25
11
38
AIO-CSM30
M30 2.0
18
13 – 18
11
33
AIO-CSM25
M25x1.5
18 13 – 18
10
30
AIO-CSM24
M24 1.5
14
10 – 14
10
30
AIO-CSM22
M22 1.5
14
10 – 14
10
30
AIO-CSM20
M20 1.5
12
6 – 12
9
30
AIO-CSM18
M18 1.5
10
5 – 10
9
25
AIO-CSM16
M16x1.5
8
4 – 8
8
22
Spanner "S"
(mm)
AIO-CSM12
M12x1.5
8
3 – 6.5
8
20
AIGO Part
Thread “A”
Max ”d”
(mm)
Cable Range
(mm)
Thread “L”
(mm)
Clamp ”H”
(mm)
Metal Cable Glands
Nylon Cable Glands
14
15
18
22
22
24
27
30
30
32
40
40
50
60
67
75
90
100
24
30
50
50
65
80
100
24
30
40
50
50
65
82
100
14
18
22
20
22
24
30
50
60
65
AIO-CSJPG48
PG48
44
37 – 44
12
44
AIO-CSJPG42
PG42
38
32 – 38
11
42
AIO-CSJPG36
PG36
32
22 – 32
10
38
AIO-CSJPG21
PG21
18
13 – 18
8
26
AIO-CSJPG16
PG16
14
10 – 14
8
25
AIO-CSJPG13.5
PG13.5
12
6 – 12
8
24
AIO-CSJPGM16
M16x1.5
10
6.2 – 10
6.5
22
AIO-CSJPG11
PG11
10
5 – 10
7
20
AIO-CSJPG9
PG9
8
4 – 8
7
21
AIO-CSJPG7
PG7
6.5
3 – 6.5
6
18
AIO-CSJGIN3
G3”
70
62 – 70
20
55
AIO-CSJGIN5/2
G2 1/2”
52
46 – 52
16
47
AIO-CSJGIN2
G2”
44
37 – 44
12
44
AIO-CSJGIN3/2
G1”1/2”
32
22 – 32
10
39
AIO-CSJGIN5/4
G1”1/4”
32
22 – 32
10
39
AIO-CSJGIN1
G1”
25
18 – 25
10
34
AIO-CSJGIN3/4
G3/4”
18
13 – 18
8
27
AIO-CSJGIN1/2
G1/2”
12
6 – 12
8
24
AIO-CSJIN3
NPT3”
70
62 – 70
26
58
AIO-CSJIN5/2
NPT2 1/2”
52
46 – 52
23.7
58
AIO-CSJIN2
NPT2”
44
37 – 44
17.7
46
AIO-CSJIN3/2
NPT1”1/2”
32
22 – 32
17.3
46
AIO-CSJIN5/4
NPT1”1/4”
32
22 – 32
17.3
41
AIO-CSJIN3/4
NPT3/4”
18
13 – 18
14.1
26
AIO-CSJIN1/2
NPT1/2”
12
6 – 12
13.6
25
AIO-CSJM90
M90 2.0
70
62 – 70
20
57
AIO-CSJM80
M80 2.0
60
52 – 60
20
57
AIO-CSJM72
M72 2.0
52
46 – 52
16
47
AIO-CSJM63
M63 1.5
44
37 – 44
12
43
AIO-CSJM50
M50 1.5
38
32 – 38
11
39
AIO-CSJM40
M40 1.5
32
22 – 32
10
39
AIO-CSJM36
M36 2.0
25
18 – 25
10
34
AIO-CSJM32
M32 1.5
25
18 – 25
10
27
AIO-CSJM30
M30 2.0
18
13 – 18
8
26
AIO-CSJM27
M27 2.0
18
13 – 18
8
26
AIO-CSJM25
M25x1.5
18
13 – 18
7.8
23
AIO-CSJM24
M24 1.5
14
10 – 14
8
24
AIO-CSJM22
M22 1.5
14
10 – 14
8
24
AIO-CSJM20
M20x1.5
12
6 – 12
8.3
20
AIO-CSJM18
M18x1.5
10
5 – 10
7
20
AIO-CSJM16
M16x1.5
9
6 – 9
6.3
20
AIO-CSJM14
M14x1.5
8
4 – 8
5
19
Spanner "S"
(mm)
AIO-CSJM12
M12x1.5
6.5
3 – 6.5
6.2
15
AIGO Part
Thread “A”
Max ”d”
(mm)
Cable Range
(mm)
Thread “L”
(mm)
Clamp ”H”
(mm)
Nylon Cable Glands
Material: Nylon 66 (UL Approved 94V-2)
Seal Ring: UL 94V-2(UL Approved 94V-2)
Thread Type: Metric , PG, NPT
Temp Range: Static: - 40°C ∼+100°C
Dynamic: - 20°C ∼+ 80°C
Short Term: +120°C
Current Colors: Gray, Black
Metal Cable Glands
Material: Brass with Nickel; Brass with Tin/Nickel
Clamping: UL approved PA6, 94V-0
Seal Ring: UL 94V-2 (UL approved NBR, 94V-2;UL approved
DOW CORNING RUBBER, 94V-0
Thread Type: Metric, PG, NPT
Protective: IP68 (tighten with o-ring)
Temp Range: - 40°C ∼+100°C
Torque Value (N-M) to tighten the fitting to the flexible cord: 6.25N-M
Torque Value (N-M) to tighten the fitting to the threaded hub: 4.17N-M
M12, M16, M20 are UL recognized under file # E339605
For additional information on other products available
refer to our Cord Grips & Cable Glands, Catalog 12-055.
15
19
22
24
27
27
33
33
42
42
54
60
80
24
33
54
54
24
33
42
54
54
80
15
19
22
24
27
33
42
54
60
AIO-CSPG42
PG42
38
32 – 38
14
52
AIO-CSPG36
PG36
32
22 – 32
13
48
AIO-CSPG29
PG29
25
18 – 25
11
38
AIO-CSPG21
PG21
18
13 – 18
11
33
AIO-CSPG16
PG16
14
10 – 14
10
28
AIO-CSPG13.5
PG13.5
12
6 – 12
9
26
AIO-CSPG11
PG11
10
5 – 10
8
24
AIO-CSPG9
PG9
8
4 – 8
8
22
AIO-CSPG7
PG7
6.5
3 – 6.5
8
20
AIO-CSGIN5/2
G2”1/2”
57
51 – 57
14
75
AIO-CSGIN3/2
G1”1/2”
32
22 – 32
13
48
AIO-CSGIN5/4
G1”1/4”
28
21 – 28
13
48
AIO-CSGIN1
G1”
25
18 – 25
11
33
AIO-CSGIN3/4
G3/4”
18
13 – 18
11
27
AIO-CSGIN1/2
G1/2”
12
6 – 12
9
26
AIO-CSIN3/2
NPT1”1/2”
32
22 – 32
17.3
50
AIO-CSIN5/4
NPT1”1/4”
32
22 – 32
17.3
46
AIO-CSIN3/4
NPT3/4”
18
13 – 18
14.1
32
AIO-CSIN1/2
NPT1/2”
12
6 – 12
13.6
28
AIO-CSM72
M72 2.0
57
51 – 57
16
75
AIO-CSM50
M50 1.5
38
32 – 38
14
50
AIO-CSM40
M40 1.5
32
22 – 32
13
48
AIO-CSM33
M33 2.0
25
18 – 25
11
39
AIO-CSM32
M32 1.5
25
18 – 25
11
38
AIO-CSM30
M30 2.0
18
13 – 18
11
33
AIO-CSM25
M25x1.5
18 13 – 18
10
30
AIO-CSM24
M24 1.5
14
10 – 14
10
30
AIO-CSM22
M22 1.5
14
10 – 14
10
30
AIO-CSM20
M20 1.5
12
6 – 12
9
30
AIO-CSM18
M18 1.5
10
5 – 10
9
25
AIO-CSM16
M16x1.5
8
4 – 8
8
22
Spanner "S"
(mm)
AIO-CSM12
M12x1.5
8
3 – 6.5
8
20
AIGO Part
Thread “A”
Max ”d”
(mm)
Cable Range
(mm)
Thread “L”
(mm)
Clamp ”H”
(mm)
Metal Cable Glands
Nylon Cable Glands
14
15
18
22
22
24
27
30
30
32
40
40
50
60
67
75
90
100
24
30
50
50
65
80
100
24
30
40
50
50
65
82
100
14
18
22
20
22
24
30
50
60
65
AIO-CSJPG48
PG48
44
37 – 44
12
44
AIO-CSJPG42
PG42
38
32 – 38
11
42
AIO-CSJPG36
PG36
32
22 – 32
10
38
AIO-CSJPG21
PG21
18
13 – 18
8
26
AIO-CSJPG16
PG16
14
10 – 14
8
25
AIO-CSJPG13.5
PG13.5
12
6 – 12
8
24
AIO-CSJPGM16
M16x1.5
10
6.2 – 10
6.5
22
AIO-CSJPG11
PG11
10
5 – 10
7
20
AIO-CSJPG9
PG9
8
4 – 8
7
21
AIO-CSJPG7
PG7
6.5
3 – 6.5
6
18
AIO-CSJGIN3
G3”
70
62 – 70
20
55
AIO-CSJGIN5/2
G2 1/2”
52
46 – 52
16
47
AIO-CSJGIN2
G2”
44
37 – 44
12
44
AIO-CSJGIN3/2
G1”1/2”
32
22 – 32
10
39
AIO-CSJGIN5/4
G1”1/4”
32
22 – 32
10
39
AIO-CSJGIN1
G1”
25
18 – 25
10
34
AIO-CSJGIN3/4
G3/4”
18
13 – 18
8
27
AIO-CSJGIN1/2
G1/2”
12
6 – 12
8
24
AIO-CSJIN3
NPT3”
70
62 – 70
26
58
AIO-CSJIN5/2
NPT2 1/2”
52
46 – 52
23.7
58
AIO-CSJIN2
NPT2”
44
37 – 44
17.7
46
AIO-CSJIN3/2
NPT1”1/2”
32
22 – 32
17.3
46
AIO-CSJIN5/4
NPT1”1/4”
32
22 – 32
17.3
41
AIO-CSJIN3/4
NPT3/4”
18
13 – 18
14.1
26
AIO-CSJIN1/2
NPT1/2”
12
6 – 12
13.6
25
AIO-CSJM90
M90 2.0
70
62 – 70
20
57
AIO-CSJM80
M80 2.0
60
52 – 60
20
57
AIO-CSJM72
M72 2.0
52
46 – 52
16
47
AIO-CSJM63
M63 1.5
44
37 – 44
12
43
AIO-CSJM50
M50 1.5
38
32 – 38
11
39
AIO-CSJM40
M40 1.5
32
22 – 32
10
39
AIO-CSJM36
M36 2.0
25
18 – 25
10
34
AIO-CSJM32
M32 1.5
25
18 – 25
10
27
AIO-CSJM30
M30 2.0
18
13 – 18
8
26
AIO-CSJM27
M27 2.0
18
13 – 18
8
26
AIO-CSJM25
M25x1.5
18
13 – 18
7.8
23
AIO-CSJM24
M24 1.5
14
10 – 14
8
24
AIO-CSJM22
M22 1.5
14
10 – 14
8
24
AIO-CSJM20
M20x1.5
12
6 – 12
8.3
20
AIO-CSJM18
M18x1.5
10
5 – 10
7
20
AIO-CSJM16
M16x1.5
9
6 – 9
6.3
20
AIO-CSJM14
M14x1.5
8
4 – 8
5
19
Spanner "S"
(mm)
AIO-CSJM12
M12x1.5
6.5
3 – 6.5
6.2
15
AIGO Part
Thread “A”
Max ”d”
(mm)
Cable Range
(mm)
Thread “L”
(mm)
Clamp ”H”
(mm)
Nylon Cable Glands
Material: Nylon 66 (UL Approved 94V-2)
Seal Ring: UL 94V-2(UL Approved 94V-2)
Thread Type: Metric , PG, NPT
Temp Range: Static: - 40°C ∼+100°C
Dynamic: - 20°C ∼+ 80°C
Short Term: +120°C
Current Colors: Gray, Black
Metal Cable Glands
Material: Brass with Nickel; Brass with Tin/Nickel
Clamping: UL approved PA6, 94V-0
Seal Ring: UL 94V-2 (UL approved NBR, 94V-2;UL approved
DOW CORNING RUBBER, 94V-0
Thread Type: Metric, PG, NPT
Protective: IP68 (tighten with o-ring)
Temp Range: - 40°C ∼+100°C
Torque Value (N-M) to tighten the fitting to the flexible cord: 6.25N-M
Torque Value (N-M) to tighten the fitting to the threaded hub: 4.17N-M
M12, M16, M20 are UL recognized under file # E339605
For additional information on other products available
refer to our Cord Grips & Cable Glands, Catalog 12-055.
15
19
22
24
27
27
33
33
42
42
54
60
80
24
33
54
54
24
33
42
54
54
80
15
19
22
24
27
33
42
54
60
AIO-CSPG42
PG42
38
32 – 38
14
52
AIO-CSPG36
PG36
32
22 – 32
13
48
AIO-CSPG29
PG29
25
18 – 25
11
38
AIO-CSPG21
PG21
18
13 – 18
11
33
AIO-CSPG16
PG16
14
10 – 14
10
28
AIO-CSPG13.5
PG13.5
12
6 – 12
9
26
AIO-CSPG11
PG11
10
5 – 10
8
24
AIO-CSPG9
PG9
8
4 – 8
8
22
AIO-CSPG7
PG7
6.5
3 – 6.5
8
20
AIO-CSGIN5/2
G2”1/2”
57
51 – 57
14
75
AIO-CSGIN3/2
G1”1/2”
32
22 – 32
13
48
AIO-CSGIN5/4
G1”1/4”
28
21 – 28
13
48
AIO-CSGIN1
G1”
25
18 – 25
11
33
AIO-CSGIN3/4
G3/4”
18
13 – 18
11
27
AIO-CSGIN1/2
G1/2”
12
6 – 12
9
26
AIO-CSIN3/2
NPT1”1/2”
32
22 – 32
17.3
50
AIO-CSIN5/4
NPT1”1/4”
32
22 – 32
17.3
46
AIO-CSIN3/4
NPT3/4”
18
13 – 18
14.1
32
AIO-CSIN1/2
NPT1/2”
12
6 – 12
13.6
28
AIO-CSM72
M72 2.0
57
51 – 57
16
75
AIO-CSM50
M50 1.5
38
32 – 38
14
50
AIO-CSM40
M40 1.5
32
22 – 32
13
48
AIO-CSM33
M33 2.0
25
18 – 25
11
39
AIO-CSM32
M32 1.5
25
18 – 25
11
38
AIO-CSM30
M30 2.0
18
13 – 18
11
33
AIO-CSM25
M25x1.5
18 13 – 18
10
30
AIO-CSM24
M24 1.5
14
10 – 14
10
30
AIO-CSM22
M22 1.5
14
10 – 14
10
30
AIO-CSM20
M20 1.5
12
6 – 12
9
30
AIO-CSM18
M18 1.5
10
5 – 10
9
25
AIO-CSM16
M16x1.5
8
4 – 8
8
22
Spanner "S"
(mm)
AIO-CSM12
M12x1.5
8
3 – 6.5
8
20
AIGO Part
Thread “A”
Max ”d”
(mm)
Cable Range
(mm)
Thread “L”
(mm)
Clamp ”H”
(mm)
Metal Cable Glands
Nylon Cable Glands
14
15
18
22
22
24
27
30
30
32
40
40
50
60
67
75
90
100
24
30
50
50
65
80
100
24
30
40
50
50
65
82
100
14
18
22
20
22
24
30
50
60
65
AIO-CSJPG48
PG48
44
37 – 44
12
44
AIO-CSJPG42
PG42
38
32 – 38
11
42
AIO-CSJPG36
PG36
32
22 – 32
10
38
AIO-CSJPG21
PG21
18
13 – 18
8
26
AIO-CSJPG16
PG16
14
10 – 14
8
25
AIO-CSJPG13.5
PG13.5
12
6 – 12
8
24
AIO-CSJPGM16
M16x1.5
10
6.2 – 10
6.5
22
AIO-CSJPG11
PG11
10
5 – 10
7
20
AIO-CSJPG9
PG9
8
4 – 8
7
21
AIO-CSJPG7
PG7
6.5
3 – 6.5
6
18
AIO-CSJGIN3
G3”
70
62 – 70
20
55
AIO-CSJGIN5/2
G2 1/2”
52
46 – 52
16
47
AIO-CSJGIN2
G2”
44
37 – 44
12
44
AIO-CSJGIN3/2
G1”1/2”
32
22 – 32
10
39
AIO-CSJGIN5/4
G1”1/4”
32
22 – 32
10
39
AIO-CSJGIN1 G1” 25 18 – 25 10 34
AIO-CSJGIN3/4
G3/4”
18
13 – 18
8
27
AIO-CSJGIN1/2
G1/2”
12
6 – 12
8
24
AIO-CSJIN3
NPT3”
70
62 – 70
26
58
AIO-CSJIN5/2
NPT2 1/2”
52
46 – 52
23.7
58
AIO-CSJIN2 NPT2” 44 37 – 44 17.7 46
AIO-CSJIN3/2
NPT1”1/2”
32
22 – 32
17.3
46
AIO-CSJIN5/4
NPT1”1/4”
32
22 – 32
17.3
41
AIO-CSJIN3/4
NPT3/4”
18
13 – 18
14.1
26
AIO-CSJIN1/2
NPT1/2”
12
6 – 12
13.6
25
AIO-CSJM90 M90 2.0 70 62 – 70 20 57
AIO-CSJM80
M80 2.0
60
52 – 60
20
57
AIO-CSJM72
M72 2.0
52
46 – 52
16
47
AIO-CSJM63
M63 1.5
44
37 – 44
12
43
AIO-CSJM50
M50 1.5
38
32 – 38
11
39
AIO-CSJM40 M40 1.5 32 22 – 32 10 39
AIO-CSJM36
M36 2.0
25
18 – 25
10
34
AIO-CSJM32
M32 1.5
25
18 – 25
10
27
AIO-CSJM30
M30 2.0
18
13 – 18
8
26
AIO-CSJM27
M27 2.0
18
13 – 18
8
26
AIO-CSJM25 M25x1.5 18 13 – 18 7.8 23
AIO-CSJM24
M24 1.5
14
10 – 14
8
24
AIO-CSJM22
M22 1.5
14
10 – 14
8
24
AIO-CSJM20
M20x1.5
12
6 – 12
8.3
20
AIO-CSJM18
M18x1.5
10
5 – 10
7
20
AIO-CSJM16 M16x1.5 9 6 – 9 6.3 20
AIO-CSJM14
M14x1.5
8
4 – 8
5
19
Spanner "S"
(mm)
AIO-CSJM12
M12x1.5
6.5
3 – 6.5
6.2
15
AIGO Part Thread “A”
Max ”d”
(mm)
Cable Range
(mm)
Thread “L”
(mm)
Clamp ”H”
(mm)
Nylon Cable Glands
Material: Nylon 66 (UL Approved 94V-2)
Seal Ring: UL 94V-2(UL Approved 94V-2)
Thread Type: Metric , PG, NPT
Temp Range: Static: - 40°C ∼+100°C
Dynamic: - 20°C ∼+ 80°C
Short Term: +120°C
Current Colors: Gray, Black
Metal Cable Glands
Material: Brass with Nickel; Brass with Tin/Nickel
Clamping: UL approved PA6, 94V-0
Seal Ring: UL 94V-2 (UL approved NBR, 94V-2;UL approved
DOW CORNING RUBBER, 94V-0
Thread Type: Metric, PG, NPT
Protective: IP68 (tighten with o-ring)
Temp Range: - 40°C ∼+100°C
Torque Value (N-M) to tighten the fitting to the flexible cord: 6.25N-M
Torque Value (N-M) to tighten the fitting to the threaded hub: 4.17N-M
M12, M16, M20 are UL recognized under file # E339605
For additional information on other products available
refer to our Cord Grips & Cable Glands, Catalog 12-055.
15
19
22
24
27
27
33
33
42
42
54
60
80
24
33
54
54
24
33
42
54
54
80
15
19
22
24
27
33
42
54
60
AIO-CSPG42
PG42
38
32 – 38
14
52
AIO-CSPG36
PG36
32
22 – 32
13
48
AIO-CSPG29
PG29
25
18 – 25
11
38
AIO-CSPG21
PG21
18
13 – 18
11
33
AIO-CSPG16
PG16
14
10 – 14
10
28
AIO-CSPG13.5
PG13.5
12
6 – 12
9
26
AIO-CSPG11
PG11
10
5 – 10
8
24
AIO-CSPG9
PG9
8
4 – 8
8
22
AIO-CSPG7
PG7
6.5
3 – 6.5
8
20
AIO-CSGIN5/2
G2”1/2”
57
51 – 57
14
75
AIO-CSGIN3/2
G1”1/2”
32
22 – 32
13
48
AIO-CSGIN5/4
G1”1/4”
28
21 – 28
13
48
AIO-CSGIN1
G1”
25
18 – 25
11
33
AIO-CSGIN3/4
G3/4”
18
13 – 18
11
27
AIO-CSGIN1/2
G1/2”
12
6 – 12
9
26
AIO-CSIN3/2
NPT1”1/2”
32
22 – 32
17.3
50
AIO-CSIN5/4
NPT1”1/4”
32
22 – 32
17.3
46
AIO-CSIN3/4
NPT3/4”
18
13 – 18
14.1
32
AIO-CSIN1/2
NPT1/2”
12
6 – 12
13.6
28
AIO-CSM72
M72 2.0
57
51 – 57
16
75
AIO-CSM50
M50 1.5
38
32 – 38
14
50
AIO-CSM40
M40 1.5
32
22 – 32
13
48
AIO-CSM33
M33 2.0
25
18 – 25
11
39
AIO-CSM32
M32 1.5
25
18 – 25
11
38
AIO-CSM30
M30 2.0
18
13 – 18
11
33
AIO-CSM25
M25x1.5
18 13 – 18
10
30
AIO-CSM24
M24 1.5
14
10 – 14
10
30
AIO-CSM22
M22 1.5
14
10 – 14
10
30
AIO-CSM20
M20 1.5
12
6 – 12
9
30
AIO-CSM18
M18 1.5
10
5 – 10
9
25
AIO-CSM16
M16x1.5
8
4 – 8
8
22
Spanner "S"
(mm)
AIO-CSM12
M12x1.5
8
3 – 6.5
8
20
AIGO Part
Thread “A”
Max ”d”
(mm)
Cable Range
(mm)
Thread “L”
(mm)
Clamp ”H”
(mm)
Metal Cable Glands
Nylon Cable Glands
14
15
18
22
22
24
27
30
30
32
40
40
50
60
67
75
90
100
24
30
50
50
65
80
100
24
30
40
50
50
65
82
100
14
18
22
20
22
24
30
50
60
65
AIO-CSJPG48
PG48
44
37 – 44
12
44
AIO-CSJPG42
PG42
38
32 – 38
11
42
AIO-CSJPG36
PG36
32
22 – 32
10
38
AIO-CSJPG21
PG21
18
13 – 18
8
26
AIO-CSJPG16 PG16 14 10 – 14 8 25
AIO-CSJPG13.5
PG13.5
12
6 – 12
8
24
AIO-CSJPGM16
M16x1.5
10
6.2 – 10
6.5
22
AIO-CSJPG11
PG11
10
5 – 10
7
20
AIO-CSJPG9
PG9
8
4 – 8
7
21
AIO-CSJPG7
PG7
6.5
3 – 6.5
6
18
AIO-CSJGIN3
G3”
70
62 – 70
20
55
AIO-CSJGIN5/2
G2 1/2”
52
46 – 52
16
47
AIO-CSJGIN2
G2”
44
37 – 44
12
44
AIO-CSJGIN3/2
G1”1/2”
32
22 – 32
10
39
AIO-CSJGIN5/4
G1”1/4”
32
22 – 32
10
39
AIO-CSJGIN1
G1”
25
18 – 25
10
34
AIO-CSJGIN3/4
G3/4”
18
13 – 18
8
27
AIO-CSJGIN1/2
G1/2”
12
6 – 12
8
24
AIO-CSJIN3
NPT3”
70
62 – 70
26
58
AIO-CSJIN5/2
NPT2 1/2”
52
46 – 52
23.7
58
AIO-CSJIN2
NPT2”
44
37 – 44
17.7
46
AIO-CSJIN3/2
NPT1”1/2”
32
22 – 32
17.3
46
AIO-CSJIN5/4
NPT1”1/4”
32
22 – 32
17.3
41
AIO-CSJIN3/4
NPT3/4”
18
13 – 18
14.1
26
AIO-CSJIN1/2
NPT1/2”
12
6 – 12
13.6
25
AIO-CSJM90
M90 2.0
70
62 – 70
20
57
AIO-CSJM80
M80 2.0
60
52 – 60
20
57
AIO-CSJM72
M72 2.0
52
46 – 52
16
47
AIO-CSJM63
M63 1.5
44
37 – 44
12
43
AIO-CSJM50
M50 1.5
38
32 – 38
11
39
AIO-CSJM40
M40 1.5
32
22 – 32
10
39
AIO-CSJM36
M36 2.0
25
18 – 25
10
34
AIO-CSJM32
M32 1.5
25
18 – 25
10
27
AIO-CSJM30
M30 2.0
18
13 – 18
8
26
AIO-CSJM27
M27 2.0
18
13 – 18
8
26
AIO-CSJM25
M25x1.5
18
13 – 18
7.8
23
AIO-CSJM24
M24 1.5
14
10 – 14
8
24
AIO-CSJM22
M22 1.5
14
10 – 14
8
24
AIO-CSJM20
M20x1.5
12
6 – 12
8.3
20
AIO-CSJM18
M18x1.5
10
5 – 10
7
20
AIO-CSJM16
M16x1.5
9
6 – 9
6.3
20
AIO-CSJM14
M14x1.5
8
4 – 8
5
19
Spanner "S"
(mm)
AIO-CSJM12
M12x1.5
6.5
3 – 6.5
6.2
15
AIGO Part
Thread “A”
Max ”d”
(mm)
Cable Range
(mm)
Thread “L”
(mm)
Clamp ”H”
(mm)
88
89
Amphenol GT Connectors
with RADSOK technology
Amphenol offers Amphe-Power Connectors, high amperage
capability connectors designed for the most demanding industrial
and transportation applications. The GT connectors, in most shell
styles, can be enhanced with RADSOK contacts that handle up
to 150% higher amperages than standard contacts.
The RADSOK contact is a hyperbolic, stamped grid configuration
within the socket. As male pin is inserted, axial members in the
female half deflect, imparting high current flow across the con-
nection with minimal voltage loss. This design ensures a large,
coaxial, face-to-face surface area engagement and provides
higher current capacity with minimized temperature rise. The
RADSOKʼs strongest benefit is its very low mill-volt drop because
of the intimate contact provided by the spring force of the grid.
RADSOK contacts are available in size 8 (69 amps), size 4 (120
amps), and size 0 (250 amps). Current Amphe-Power lines sup-
port from 50A to 500A continuous duty. Hybrid arrangements
with RADSOK and power contacts can be tailored to meet cus-
tomer needs.
For more information on GT Amphe-Power Connectors, request
Brochure SL-391.
The RADSOK Contact Advantage:
• Low contact Resistance
• Low milli-volt drop performance
• Higher current capacity with minimized temperature rise.
• Reliability under vibration and shock.
• High quality, consistency and lower cost
Amphe-Power™ Amphe-GTR
The Amphe-Power™ GT series provides the benefit of a GT con-
nector in a high performance composite material. The GT-R is
listed to UL/CUL 2238 Standard, Control Number 19VP. It also
meets all of the specifications for high power process control and
server applications. Performance level is the same as that of the
GT series. RADSOK contacts enable an increased current rating
of 120A on individual contacts, and a standard PG thread
achieves an IP67 seal rating.
Compression (setscrew) wire termination to the 4/6AWG or 8/
10AWG conductors allows for easy field replacement of pin or
socket contacts. It also provides for easy complete plug or recep-
tacle assemblies, all without a need for specialized tooling.
Power GT
The Power GT is a modification to the GT series incorporating
three 8.0mm RADSOK contacts mounted in a common termina-
tion to busbar or cable, enhanced to an ultra-high current density
in a compact shell size 28 layout. This design created the first
TUV “finger-proof” 500A connector in the marketplace with the
“dead-front” pin design to prevent contact with live circuits. In
environmental versions, this connector achieves IP67 perfor-
mance.
The ninety-degree wire orientation on the plug provides low-pro-
file mounting for tight packaging requirements. This plug is
designed to be over-molded, and can also be fitted with mechan-
ical hardware for individual requirements.
Amphenol
®
GT Amphe-Power Connectors
with RADSOK
®
high amperage contacts
®
Amphe-Power Composite GTR Connector
Power GT, Finger-Proof 500A Connector
89
90
GTC-M Series - The GT with Metal Clip Inserts
Amphenolʼs GTC-M series combines the GT reverse bayonet con-
nector and the rear release metal clip retention system which is
used in the Amphenol®/Matrix® MIL-C-5015 connector line.
Another benefit is the captivated coupling nut assembly which
allows unmating without the rear accessories attached.
Improved environmental sealing is achieved with this series. The
crimp joint is covered by a three-webbed fluorinated silicone grom-
met that seals on the wires without the necessity of an additional
sealing clamp. An interfacial seal with conical towers on the pin
insert matches with recesses on the socket; a match that provides
the popular “cork and bottle” seal during mating. The grommet and
the interfacial seal provides adequate sealing during environmen-
tal extremes. The GTC-M series is intermateable and intermount-
able with the standard GT series, and it uses standard M85049
style rear accessories. For more information on the GTC-M Series,
request Product Data Sheet #181.
GT-PC Connectors for High Voltage Power Applications
The Amphenol®GT-PC connectors were developed for use in the
High Voltage Power Distribution industry. Incorporating all the
standard features of the popular GT series, these connectors will
prevent accidental electrical shocks to the technicians. “Dead
Front” pin contacts in size 0 are recessed into a socket insert, pre-
venting inadvertent contact with a live circuit. Higher amperage
levels are provided - up to 100 amps per contact. The GT-PC
series has been UL approved. “First Mate - Last Break” features on
one or more of the pins provide an additional measure of operator
safety. Currently there are 5 insert patterns available. Consult
Amphenol Industrial Operations for more information.
GT Connectors for the HMI Lighting Industry
Amphenol provides GT connectors for the rugged use experienced
during stage shows and other entertainment events, even outside
in the elements. The same 3-point bayonet coupling system and
the same ruggedness to survive 2000 mating cycles are provided.
The unique features of this connector series include color-coded
receptacle shells with matching backshells on the cable plugs. The
colors can be matched to specific wattage cables and/or light sys-
tems. A wide selection of environmental adapters designed to seal
on the outside diameter of specific cable diameters can be fitted to
the backshells. Applications for these connectors include power
and control of lighting trusses, and portable power and dimmer
racks. For more information request Product Data Sheet #174.
Amphenol
®
GTC-M with Metal Clip Inserts
Amphenol
®
GT-PC Connectors for High Voltage
Power Applications
Amphenol
®
GT Connectors for the
HMI Lighting Industry
Amphenol GT Connectors
special applications
®
90
91
Additional Amphenol Industrial Connectors
for the Rail Industry
ARCL Series
Amphenol has developed a heavy duty 5015 type connector with
38999 Series III type coupling for use in mass transportation and
heavy equipment applications. The ARCL Series has the same
electrical characteristics as 5015 standard product but it has rug-
ged ratchet double start stub threads. These rugged double stub
threads eliminate mis-mating and provide for easy cleaning.
Other features/benefits of the ARCL connector series:
• 5 key/keyway alignment feature.
• Operating temperature is from –55°C to +125°C.
Operating voltage is to 3000 VAC (RMS) at sea level.
• Crimp and solder termination available.
• 5 shell styles with all the 5015 insert patterns available.
• Supplied with low smoke, low halogen inserts which are
flame retardant, but also can be supplied with standard 5015
inserts.
• Wide variety of backend accessories for all styles of cable
and conduit, and a variety of cable strain reliefs including
over-molding and heat shrink boots.
• RADSOK high amperage sockets can be incorporated.
Star-Line® Series
Amphenol/Pyle Star-Line Series is another heavy duty environ-
mental cylindrical connector widely used in mass transportation
and in the oil exploration market. Ideal for high amperage and
high density control and instrumentation applications, this series
has features and benefits as follows;
• Hard anodic coating for dielectric strength with heat and cor-
rosion resistance.
• Operating temperature is from –67°F to +257°F.
Amperages up to 1135 amps at 1000VAC or DC rating avail-
able.
• Double lead Acme threads provide complete coupling in one
turn of the coupling nut, and do not clog under adverse
weather conditions.
• Solder, crimp and pressure terminals; circuit breaking power
and control types available.
• UL listed and CSA listed for circuit breaking capability.
• 5 shell styles with over 150 insert patterns.
• 3 retention styles with captive contacts or insertable/remov-
able contacts.
• Variety of backend accessories including basketweave cable
grips, straight or angled adapters and receptacles mounted
to junction boxes.
Over-Molded Cable
Cables can be designed with custom overmold to Amphenol
Industrial cylindrical connectors for almost any application in
mass transportation or any other types of industrial markets.
Overmold seals to the rear of the connector and to the cable
jacket to provide moisture sealing. Cables may be designed to
meet any environmental performance requirement and any elec-
trical performance requirement. Variety of materials are avail-
able: neoprene, hypalon and others.
Consult Amphenol Industrial Operations for further information
on these industrial products.
Amphenol
®
ARCL Series
Amphenol
®
Star-Line
®
Series
Over-Molded Cable for Industrial Connectors
91
92
Additional Amphenol Industrial Products
for the Rail Industry, cont.
Trans-Power® Connectors
Amphenol/Pyle provides head-end power connectors for com-
mercial rail systems. These meet Amtrak specification D-77-24,
APTA #RP-E-016. Features and benefits include:
• Slip-fit, double seated for environmental protection.
• Retention by receptacle cover or optional accessories.
• Crimp termination per Amtrak and APTA specifications.
• Socket contacts provide uniform pressure for low mating and
unmating forces, low voltage drop, consistently low tempera-
ture rise and shock resistance.
• Operating ambient temperature is –57°F to +110°F.
Electrical performance up to 600 volts, 400 Amps.
• All molded elastomeric rubber body on jumper. Raintight per
U/L standard.
27 Pole Train-line Receptacles and Jumpers
Amphenol/Pyle 27 pole MU (multiple unit) and communication
receptacles and jumpers are provided for rail applications. Jump-
ers are either standard car to car, between locomotives or
between locomotives and lead cars. These products are
designed to Amtrak and APTA specifications. Other design fea-
tures and benefits:
• Locomotive jumpers are keyed differently from all other 27
pole jumpers to prevent mis-mating. They also have identifi-
cation markings to distinquish their proper usage on locomo-
tives.
• Receptacles are a rugged aluminum housing with a spring
loaded cover. Receptacles can be provided with or without
leads.
• Push-pull mating.
Amphe-Y Composite Molded Connectors
The Amphe-Y is a new Amphenol product for mass transit appli-
cation that uses RADSOK high amperage sockets. It is a molded
interconnect system that provides rapid and safe connect and
disconnect for traction motor installation and repair.
This packaging solution consists of a molded base plate, a silver-
plated copper “connector” with RADSOK contacts, and a molded
top cover. When attached to the traction motor, this unit creates a
safe, reliable and efficient means of conducting high amperage
current from the third rail or catenary to the propulsion controller.
Each “leg” of this assembly can safely accommodate up to 1000
amps through the 18mm RADSOK contacts.
Amphenol has wide capabilities in designing specialty molded
interconnect solutions, such as the new Amphe-Y, for power and/
or harsh environment applications. Custom designs can include
bayonet, theaded or push-pull coupling with crimp solder or pres-
sure termination. They can utilize RADSOK or standard contacts
and can be designed to meet specific environmental sealing
requirements and temperature ratings.
Consult Amphenol Industrial Operations for further information
on these industrial products.
Amphenol
®
Trans-Power
®
Connectors
for Rail Mass Transit
Amphenol
®
27 Pole Train-line
Receptacle and Jumpers for Rail Mass Transit
Amphe-Y Molded Interconnect System for
Rail Mass Transit
92
Amphenol® 97 Series Connectors are UL recognized and CSA recognized.
AMPHENOL CORPORATION
Amphenol Industrial
Phone: 888-364-9011
191 Delaware Avenue
Sidney, NY 13838-1395
www.amphenol-industrial.com
Notice: Specications are subject to change without notice. Contact your nearest Amphenol Corporation Sales Ofce for the latest specications. All statements, information and data given herein are believed
to be accurate and reliable but are presented without guarantee, warranty, or responsibility of any kind expressed or implied. Statements or suggestions concerning possible use of our products are made without
representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The user should not assume that all safety measures are indicated or that other
measures may not be required. Specications are typical and may not apply to all connectors.
IC-4-2
HKA 6-2016
www.amphenol-industrial.com