1N5985UR-1 thru 1N6031BUR-1 ( or MLL5985-1 thru MLL6031B-1) METALLURGICALLY BONDED GLASS SURFACE MOUNT 500 mW Zener Diodes SCOTTSDALE DIVISION APPEARANCE The popular 1N5985UR-1 thru 1N6031BUR-1 (or MLL5985-1 thru MLL6031B-1) series of 0.5 watt Zener Voltage Regulators provides selection from 2.4 to 200 volts in standard 5% or 10% tolerances as well as tighter tolerances identified by different suffix letters on the part number. These glass-surface-mount DO213AA Zeners are also available in various military screening levels by adding a prefix identifier as described in the Features section. Microsemi also offers numerous other Zener products to meet higher and lower power applications. DO-213AA IMPORTANT: For the most current data, consult MICROSEMI's website: http://www.microsemi.com FEATURES * * * * * APPLICATIONS / BENEFITS Surface mount equivalent to JEDEC registered 1N5985 to 1N6031 Similar to operating current conditions of the BZV55 Pro Electron series of Zener products in Europe Internal metallurgical bonds Options for screening in accordance with MIL-PRF19500 for JAN, JANTX, JANTXV, and JANS are available by adding MQ, MX, MV, or MSP prefixes respectively to part numbers with "-1" suffix. Axial-leaded equivalents available as 1N5985 to 1N6031 in the DO-35 package including "-1" suffix options (consult factory for others) * * * * * * * MAXIMUM RATINGS * * * * * Regulates voltage over a broad operating current and temperature range Extensive selection from 2.4 to 200 V Standard voltage tolerances are plus/minus 5% with B suffix, 10 % with A suffix identification Tight tolerances available in plus or minus 2% or 1% with C or D suffix respectively Nonsensitive to ESD (MIL-STD-750 Method 1020) Minimal capacitance (see Figure 2) Inherently radiation hard as described in Microsemi MicroNote 050 MECHANICAL AND PACKAGING Operating and Storage temperature: -65 C to +175 C Thermal Resistance: 100 C/W junction to end cap and 250C/W for junction to ambient when mounted on FR4 PC board (1 oz Cu) with recommended footprint (see last page) Steady-State Power: 0.5 watts at end cap temperatures TEC < 125oC or 0.5 watts at ambient TA < 50C when mounted on FR4 PC board as described for thermal resistance (also see Figure 1) Forward voltage @200 mA: 1.1 volts Solder Temperatures: 260 C for 10 s (max) * * * * * CASE: Hermetically sealed glass DO-213AA (SOD80 or MLL34) MELF style package TERMINALS: End caps tin-lead plated solderable per MIL-STD-750, method 2026 POLARITY: Cathode indicated by band where diode is to be operated with the banded end positive with respect to the opposite end for Zener regulation MARKING: cathode band only TAPE & REEL option: Standard per EIA-481-B with 12 mm tape, 2000 per 7 inch reel or 5000 per 13 inch reel (add "TR" suffix to part number) WEIGHT: 0.04 grams See package dimensions on last page Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 1 1N5985UR thru 1N6031BUR-1 * * Copyright 2003 11-05-2003 REV 0 WWW . Microsemi .C OM DESCRIPTION 1N5985UR-1 thru 1N6031BUR-1 ( or MLL5985-1 thru MLL6031B-1) METALLURGICALLY BONDED GLASS SURFACE MOUNT 500 mW Zener Diodes SCOTTSDALE DIVISION *ELECTRICAL CHARACTERISTICS @ 30oC Lead Temperature. Lead Length 3/8". JEDEC Type Number** 1N5985BUR-1 1N5986BUR-1 1N5987BUR-1 1N5988BUR-1 1N5989BUR-1 1N5990BUR-1 1N5991BUR-1 1N5992BUR-1 1N5993BUR-1 1N5994BUR-1 1N5995BUR-1 1N5996BUR-1 1N5997BUR-1 1N5998BUR-1 1N5999BUR-1 1N6000BUR-1 1N6001BUR-1 1N6002BUR-1 1N6003BUR-1 1N6004BUR-1 1N6005BUR-1 1N6006BUR-1 1N6007BUR-1 1N6008BUR-1 1N6009BUR-1 1N6010BUR-1 1N6011BUR-1 1N6012BUR-1 1N6013BUR-1 1N6014BUR-1 1N6015BUR-1 1N6016BUR-1 1N6017BUR-1 1N6018BUR-1 1N6019BUR-1 1N6020BUR-1 1N6021BUR-1 1N6022BUR-1 1N6023BUR-1 1N6024BUR-1 1N6025BUR-1 1N6026BUR-1 1N6027BUR-1 1N6028BUR-1 1N6029BUR-1 1N6030BUR-1 1N6031BUR-1 VZ @ IZT Volts (Note 2) 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 100 110 120 130 150 160 180 200 (Note 1) Test Current IZT mA 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 ZZT @ IZT OHMS B,C,D A, NonSuffix Suffix 100 110 100 110 95 100 95 100 95 90 95 90 90 88 90 70 88 50 70 25 50 10 25 8.0 10 7.0 15 7.0 18 10 22 15 25 18 32 22 36 25 42 32 48 36 55 42 62 48 70 55 78 62 88 70 95 78 110 88 130 95 170 130 180 150 200 170 225 180 240 200 265 225 280 240 300 265 350 280 400 300 800 500 950 650 1250 800 1400 950 1700 1250 2000 1400 2350 1700 2700 2000 Maximum Reverse Current IR ZZK @ IZK = 0.25 ma B,C,D Suffix 1800 1900 2000 2200 2300 2400 2500 2200 2050 1800 1300 750 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 700 700 800 900 1000 1300 1400 1400 1600 1700 2000 2300 2600 3000 4000 4500 5000 5500 6000 7000 OHMS A, NonSuffix 2000 2200 2300 2400 2500 2500 2500 2500 2500 2200 2050 1800 1300 750 600 600 600 600 600 600 600 600 600 600 600 700 700 800 900 1000 1100 1300 1400 1600 1700 2000 2300 2600 3000 4000 4500 5000 5500 6000 7000 8000 9000 @ A B,C,D Suffix 100 75 50 25 15 10 5.0 3.0 2.0 2.0 1.0 1.0 0.5 0.5 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 A, NonSuffix 100 100 100 75 50 25 15 10 5.0 3.0 2.0 2.0 1.0 1.0 0.5 0.5 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 VR Volts B,C,D A, NonSuffix Suffix 1.0 0.5 1.0 0.5 1.0 0.5 1.0 0.5 0.5 1.0 1.0 1.0 1.0 1.0 1.0 1.5 1.0 2.0 1.5 3.0 2.0 4.0 3.0 5.2 4.0 6.0 5.2 6.5 6.0 7.0 6.5 8.0 7.0 8.4 8.0 9.1 8.4 9.9 9.1 11 9.9 12 11 14 12 15 14 17 15 18 17 21 18 23 21 25 23 27 25 30 27 33 30 36 33 39 36 43 39 47 43 52 47 56 52 62 56 69 62 76 69 84 76 91 84 99 91 114 99 122 114 137 122 152 Max. DC Zener Current IZM (Note 3) 208 185 167 152 139 128 116 106 98 89 81 74 67 61 55 50 45 42 38 33 31 28 25 23 21 19 17 15 14 13 12 11 9.8 8.9 8.0 7.4 6.7 6.1 5.5 5.0 4.5 4.2 3.8 3.3 3.1 2.8 2.5 Typical Temp. Coeff. of Zener Voltage VZ %/oC -0.09 -0.075 -0.07 -0.06 -0.055 -0.045 -0.01 +0.01 +0.025 +0.035 +0.04 +0.044 +0.051 +0.055 +0.061 +0.065 +0.068 +0.073 +0.075 +0.079 +.080 +0.083 +0.085 +0.087 +0.090 +0.091 +0.093 +0.094 +0.094 +0.095 +0.095 +0.096 +0.096 +0.096 +0.097 +0.097 +0.098 +0.098 +0.099 +0.110 +0.110 +0.110 +0.110 +0.110 +0.110 +0.110 +0.110 NOTES: 1. 2. 3. Copyright 2003 11-05-2003 REV 0 Zener Impedance is derived from the 1 kHz ac voltage that results when an ac current having an rms value equal to 10% of dc zener current (IZT or IZK) is superimposed on IZT or IZK. See MicroNote 202 for dynamic impedance variation with other operating currents. Voltage Measurements to be performed 20 seconds after application of the dc test current. The maximum zener current IZM shown is for the nominal voltages. The following formula can be used to determine the worst case current for any tolerance device: IZM = P VZM Where VZM is the high end of the voltage tolerance specified and P is the rated power of the device. Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 2 1N5985UR thru 1N6031BUR-1 * Indicates JEDEC Registered Data. The type number without a suffix letter before the "UR" suffix indicates a +/-20% tolerance. For 10% tolerance, add suffix A; for 5% tolerance, add suffix B (as shown); for 2% tolerance suffix C; for 1% tolerance suffix D. ** These part numbers may also be ordered as MLL5985B-1 thru MLL6031B-1 for the applicable part number and tolerance in this series. WWW . Microsemi .C OM Maximum Zener Impedance Nominal Zener Voltage 1N5985UR-1 thru 1N6031BUR-1 ( or MLL5985-1 thru MLL6031B-1) SCOTTSDALE DIVISION METALLURGICALLY BONDED GLASS SURFACE MOUNT 500 mW Zener Diodes WWW . Microsemi .C OM Pd, Rated Power Dissipation (mW) GRAPHS TEC TA o TEC, End Cap Temperature ( C) or TA Ambient temperature on FR4 PC board FIGURE 1 POWER DERATING CURVE FIGURE 2 CAPACITANCE vs. ZENER VOLTAGE (TYPICAL) PACKAGE DIMENSIONS and PAD LAYOUT INCHES MIN MAX 0.063 0.067 0.130 0.146 0.016 0.022 MILLIMETERS MIN MAX 1.60 1.70 3.30 3.70 0.41 0.55 PAD LAYOUT A B C Copyright 2003 11-05-2003 REV 0 1N5985UR thru 1N6031BUR-1 DIM A B C INCHES .200 .055 .080 mm 5.08 1.40 2.03 Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 3