SB2520FCT SB25100FCT 1 of 4 © 2006 Won-Top Electronics
Pb
SB2520FCT – SB25100FCT
25A DUAL SCHOTTKY BARRIER RECTIFIER
Features
Schottky Barrier Chip B
Guard Ring for Transient Protection
Low Forward Voltage Drop C
Low Reverse Leakage Current
High Surge Current Capability G A
Plastic Material has UL Flammability
Classification 94V-O PIN1 2 3
D
Mechanical Data F E
Case: ITO-220, Full Molded Plastic
Terminals: Plated Leads Solderable per P
MIL-STD-202, Method 208
Polarity: See Diagram I
Weight: 2.24 grams (approx.)
Mounting Position: Any H L
Mounting Torque: 11.5 cm-kg (10 in-lbs) Max.
Lead Free: For RoHS / Lead Free Version,
Add “-LF” Suffix to Part Number, See Page 4
PIN 1 - +
J PIN 3 - PIN 2
K
Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise spec ifi ed
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic Symbol SB
2520FCT
SB
2530FCT
SB
2540FCT
SB
2545FCT
SB
2550FCT
SB
2560FCT
SB
2580FCT
SB
25100FCT Unit
Peak Repetitive Revers e Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR 20 30 40 45 50 60 80 100 V
RMS Reverse Voltage VR(RMS) 14 21 28 32 35 42 56 70 V
Average Rectified Output Current @TC = 95°C IO 25 A
Non-Repetiti ve Peak Forward Surge Current
8.3ms Single half sine-wave superimposed
on rated load (JEDEC Method) IFSM 200 A
Forward Voltage @IF = 12.5A VFM 0.55 0.75 0.85 V
Peak Reverse Current @T
A = 25°C
At Rated DC Blocking Voltage @TA = 100°C IRM 0.5
100 mA
Typi cal Junction Capacitance (Note 1) Cj 1100 pF
Operating and Storage Temperature Range T j, TSTG -65 to +150 °C
Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D. C.
WTE
POWER SEM IC ON DUC TOR S
ITO-220
Dim Min Max
A 14.60 15.40
B 9.70 10.30
C 2.55 2.85
D 2.70 3.30
E 13.00 13.80
F 0.50 0.75
G 3.00 Ø 3.50 Ø
H 6.30 6.90
I 4.20 4.80
J 2.50 2.90
K 0.50 0.75
L 2.70 3.15
P 2.29 2.79
All Dimensions in mm
SB2520FCT SB25100FCT 2 of 4 © 2006 Won-Top Electronics
I , AVERAGEOUTPUT CURRENT (A)
(AV)
0
5
10
15
20
25
10 40 60 80 100 120 140150
T, CASE TEMPERATURE(ºC)
Fig. 1 Forward Current Derating Curve
C
Single Pulse Half-Wave
60 HzResistive or Inductive Load
100
1000
2000
0.1 1.0 10 10
0
C
,
C
APA
C
ITANCE (pF)
j
V , REVERSE VOLTAGE (V)
Fig. 4 Typical Junction Capacitance
R
T = 25ºC
j
f = 1MHz
0
50
100
150
200
250
110100
I , PEAK FORWARD SURGECURRENT (A)
FSM
NUMBER OF CYCLES AT 60 Hz
Fig. 3 Maximum Non-Repetitive Peak Fwd Surge Current
8.3ms Single Half Sine-Wave
JEDEC Method
1
10
20
40
00.5 1.0 1.5 2.0 2.5
I, N
S
TANTANE
O
U
S
F
O
RWARD CURRENT (A)
F
V , INSTANTANEOUS FORWARD VOLTAGE(V
)
Fig. 2 Typical Forward Characteristics
F
T=25ºC
Pulse Width = 300 s
2% Duty Cycle
jµ
2580FCT - 25100FCT
2550FCT - 2560FCT
2520FCT - 2545FCT
SB2520FCT SB25100FCT 3 of 4 © 2006 Won-Top Electronics
MARKING INFORMATION
PACKAGING INFORMATION
Tube Size
L x W x H (mm) Quantity
(PCS) Inner Box Size
L x W x H (mm) Quantity
(PCS) Carton Size
L x W x H (mm) Quantity
(PCS) Approx. Gross Weight
(KG)
525 x 31 x 6 50 555 x 145 x 95 2, 000 572 x 306 x 218 8,000 19.0
RECOMMENDED SCREW MOUNTING ARRANGEMENT
Note: 1. Anti-static tube, water clear color.
BULK
Plain Washe
r
Rectifie
r
Heatsink
Conical Washe
r
6-32 HEX Nut
The full molded plastic package affords a
major reduction of hardware as compared
to a standard TO-220 package. However,
precautions should be made in mounting
procedure.
A conical washer should be used to apply
proper force to the device. Screw shoul d
not be tightened with any type of air-forced
torque or equipment that may cause crack
on device package.
A layer of thermal grease or thermal pad in
the interface will be considerably helpful for
heat dissipation.
6-32 HEX Head Scre
w
WTE
SB25xxFCT W TE = Manufacturer’s Logo
SB25xxFCT = Device Number
xx = 20, 30, 40, 45, 50, 60, 80 or 100
Polarity = As Marked on Body
SB2520FCT SB25100FCT 4 of 4 © 2006 Won-Top Electronics
ORDERING INFORMATION
Product No. Package Type Shipping Quantity
SB2520FCT ITO-220 50 Units/Tube
SB2530FCT ITO-220 50 Units/Tube
SB2540FCT ITO-220 50 Units/Tube
SB2545FCT ITO-220 50 Units/Tube
SB2550FCT ITO-220 50 Units/Tube
SB2560FCT ITO-220 50 Units/Tube
SB2580FCT ITO-220 50 Units/Tube
SB25100FCT ITO-220 50 Units/Tube
1. Shipping quantity given is for minimum packing quantity only. For minimum
order quantity, please consult the Sales Department.
2. To order RoHS / Lead Free version (with Lead Free finish), add “-LF” suffix
to p art numb er above. Fo r example, SB2520FCT-LF.
Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any
responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to
manufacturer . WTE reserves the right to change any or all information herein without further notice.
WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life
support devices or systems without the express written approval.
We power your everyday.
Won-Top Electronics Co., Ltd.
No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan
Phone: 886-7-822-5408 or 886-7-822-5410
Fax: 886-7-822-5417
Email: sales@wontop.com
Internet: http://www.wont op.com