P4KE Transient 9ROWDJH6XSSUHVVRUV Series MERITEK UL E223045 FEATURES Plastic package. Glass passivated chip junction in DO-204AL/DO-41 package. 400W peak pulse power capability on 10/1000s waveform. Excellent clamping capability. Low zener impedance. Fast response time: typically less than 1.0ps from 0 volt to BV min. Typical IR less than 1A above 10V. High temperature soldering guaranteed: 265/10 seconds/.375", DO-204AL/DO-41 (9.5mm) lead length, 5lbs., (2.3kg) tension. M MECHANICAL DATA Case: JEDEC DO-41 Molded Plastic. Terminals: Axial leads, solderable per MIL-STD-750, Method 2026. Polarity: Color band denotes cathode except Bidirectional. Mounting Position: Any. Weight: 0.012 ounce, 0.3 grams. D DEVICES FOR BIPOLAR APPLICATION For Bidirectional, use C or CA suffix for type P4KE6.8 through type P4KE550 (e.g. P4KE6.8C, P4KE550CA); Electrical characteristics apply in both directions. M MAXIMUM RATINGS AND CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. RATING SYMBOL VALUE UNIT Peak Pulse Power Dissipation on 10/1000s waveform. (Note 1Fig. 1) PPPM Minimum 400 Watts Peak Pulse Current on 10/1000s waveform. (Note 1Fig. 3) IPPM See Table Amps PM(AV) 1.5 Watts IFSM 40 Amps TJ , TSTG -55 to +175 Steady State Power Dissipation at TL =75Lead length .375" (9.5mm). (Fig. 5) Peak Forward Surge Current8.3ms Single Half Sine-Wave Superimposed on Rated Load. (JEDEC Method) (Note 2, Fig. 6) Operating junction and Storage Temperature Range. Notes: 1. Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 per Fig. 2. 2.28.3ms single half sine-wave, or equivalent square wave, Duty cycle = 4 pulses per minute maximum. All specifications are subject to change without notice. 1 Rev 7 P4KE Transient 9ROWDJH6XSSUHVVRUV Series MERITEK PACKAGE DIMENSIONS d s DIA. DIA. L T L DO-201AL/DO-41 Millimeters Item Inches Min. Max. Min. Max. L 25.40 - 1.000 - T 4.10 5.20 0.160 0.205 d 2.00 2.70 0.080 0.107 s 0.71 0.86 0.028 0.034 SPECIFICATIONS Part Number Peak Reverse Maximum Reverse Breakdown Breakdown Test Stand-Off Voltage Voltage Pulse Leakage Clamping Current Voltage MIN.@IT MAX.@IT Voltage @IPP Current @VRWM UNI-POLAR BI-POLAR VRWM(V) VBR MIN.(V) VBR MAX.(V) IT(mA) VC(V) IPP(A) IR(A) P4KE6.8A P4KE6.8CA 5.80 6.45 7.14 10 10.5 39.0 1000 P4KE7.5A P4KE7.5CA 6.40 7.13 7.88 10 11.3 36.3 500 P4KE8.2A P4KE8.2CA 7.02 7.79 8.61 10 12.1 33.9 200 P4KE9.1A P4KE9.1CA 7.78 8.65 9.55 1 13.4 30.6 50 P4KE10A P4KE10CA 8.55 9.50 10.50 1 14.5 28.3 10 P4KE11A P4KE11CA 9.40 10.50 11.60 1 15.6 26.3 5 P4KE12A P4KE12CA 10.20 11.40 12.60 1 16.7 24.6 5 P4KE13A P4KE13CA 11.10 12.40 13.70 1 18.2 22.5 1 P4KE15A P4KE15CA 12.80 14.30 15.80 1 21.2 19.3 1 P4KE16A P4KE16CA 13.60 15.20 16.80 1 22.5 18.2 1 P4KE18A P4KE18CA 15.30 17.10 18.90 1 25.5 16.1 1 P4KE20A P4KE20CA 17.10 19.00 21.00 1 27.7 14.8 1 P4KE22A P4KE22CA 18.80 20.90 23.10 1 30.6 13.4 1 P4KE24A P4KE24CA 20.50 22.80 25.20 1 33.2 12.3 1 P4KE27A P4KE27CA 23.10 25.70 28.40 1 37.5 10.9 1 2 Rev 7 P4KE Transient 9ROWDJH6XSSUHVVRUV Series MERITEK SPECIFICATIONS Part Number Peak Reverse Maximum Reverse Breakdown Breakdown Test Stand-Off Voltage Voltage Pulse Leakage Clamping Current Voltage MIN.@IT MAX.@IT Voltage @IPP Current @VRWM BI-POLAR VRWM(V) VBR MIN.(V) VBR MAX.(V) IT(mA) VC(V) IPP(A) IR(A) P4KE30A P4KE30CA 25.60 28.50 31.50 1 41.4 9.9 1 P4KE33A P4KE33CA 28.20 31.40 34.70 1 45.7 9.0 1 P4KE36A P4KE36CA 30.80 34.20 37.80 1 49.9 8.2 1 P4KE39A P4KE39CA 33.30 37.10 41.00 1 53.9 7.6 1 P4KE43A P4KE43CA 36.80 40.90 45.20 1 59.3 6.9 1 P4KE47A P4KE47CA 40.20 44.70 49.40 1 64.8 6.3 1 P4KE51A P4KE51CA 43.60 48.50 53.60 1 70.1 5.8 1 P4KE56A P4KE56CA 47.80 53.20 58.80 1 77.0 5.3 1 P4KE62A P4KE62CA 53.00 58.90 65.10 1 85.0 4.8 1 P4KE68A P4KE68CA 58.10 64.60 71.40 1 92.0 4.5 1 P4KE75A P4KE75CA 64.10 71.30 78.80 1 103.0 4.0 1 P4KE82A P4KE82CA 70.10 77.90 86.10 1 113.0 3.6 1 P4KE91A P4KE91CA 77.80 86.50 95.50 1 125.0 3.3 1 P4KE100A P4KE100CA 85.50 95.00 105.00 1 137.0 3.0 1 P4KE110A P4KE110CA 94.00 105.00 116.00 1 152.0 2.7 1 P4KE120A P4KE120CA 102.00 114.00 126.00 1 165.0 2.5 1 P4KE130A P4KE130CA 111.00 124.00 137.00 1 179.0 2.3 1 P4KE150A P4KE150CA 128.00 143.00 158.00 1 207.0 2.0 1 P4KE160A P4KE160CA 136.00 152.00 168.00 1 219.0 1.9 1 P4KE170A P4KE170CA 145.00 162.00 179.00 1 234.0 1.8 1 P4KE180A P4KE180CA 154.00 171.00 189.00 1 246.0 1.7 1 P4KE200A P4KE200CA 171.00 190.00 210.00 1 274.0 1.5 1 P4KE220A P4KE220CA 185.00 209.00 231.00 1 328.0 1.3 1 P4KE250A P4KE250CA 214.00 237.00 263.00 1 344.0 1.2 1 P4KE300A P4KE300CA 256.00 285.00 315.00 1 414.0 1.0 1 P4KE350A P4KE350CA 300.00 332.00 368.00 1 482.0 0.85 1 P4KE400A P4KE400CA 342.00 380.00 420.00 1 548.0 0.75 1 P4KE440A P4KE440CA 376.00 418.00 462.00 1 602.0 0.68 1 P4KE480A P4KE480CA 408.00 456.00 504.00 1 658.0 0.61 1 P4KE510A P4KE510CA 434.00 485.00 535.00 1 698.0 0.57 1 P4KE530A P4KE530CA 450.00 503.50 556.50 1 725.0 0.55 1 P4KE540A P4KE540CA 459.00 513.00 567.00 1 740.0 0.54 1 P4KE550A P4KE550CA 467.00 522.50 577.50 1 760.0 0.52 1 UNI-POLAR Note: For Bidirectional type having VRWM of 10 volts and less,the IR limit doubles. 3 Rev 7 P4KE Transient 9ROWDJH6XSSUHVVRUV Series MERITEK RATING AND CHARACTERISTIC CURVES (TA: 25C UNLESS OTHERWISE SPECIFIED) Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage, % PPPM- Peak Pulse Power (KW) 100 10 1 0.1 0.1s 100 75 50 25 0 1.0s 10s 100s 1.0ms 10ms 0 td - Pulse Width (sec.) 50 75 100 125 150 175 200 TA- Ambient Temperature (C) Figure 3 - Pulse Waveform Figure 4 - Typical Junction Capacitance 10000 150 tr=10sec TJ=25C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM Peak Value IPPM 100 Bi-directional VR=0V 1000 Cj (pF) IPPM- Peak Pulse Current, % IRSM 25 Half Value IPPM IPPM ( ) Uni-directional VR=0V Uni-directional @ V R 100 2 50 0 Bi-directional @V R 10/1000sec. Waveform as defined by R.E.A 10 Tj=25C f=1.0MHz Vsig=50mVp-p td 1.0 0 2.0 3.0 1 1.0 4.0 t-Time (ms) 10.0 100.0 1000.0 VBR - Reverse Breakdown Voltage (V) Figure 6 - Maximum Non-Repetitive Forward Surge Current Uni-Directional Only Figure 5 - Steady State Power Dissipation Derating Curve 1.2 1 IFSM - Peak Forward Surge Current (A) Steady Sate Power Dissipation (W) 45 0.8 0.6 L e 0.4 0.2 40 35 30 25 20 15 10 5 0 0 25 50 75 100 125 150 175 0 200 1 TL-Lead Temperature(C) 10 100 Number of Cycles at 60 Hz 4 Rev 7