SPECIFICATION * Supplier : Samsung electro-mechanics * Samsung P/N : CL10A106KP8NNNC * Product : Multi-layer Ceramic Capacitor * Description : CAP, 10, 10V, 10%, X5R, 0603 A. Samsung Part Number Series CL 10 A 106 K P 8 N N N C Samsung Multi-layer Ceramic Capacitor Size 0603 (inch code) Dielectric X5R Capacitance Capacitance L: 1.6 0.1 Rated Voltage 10 V Thickness 0.8 0.1 mm 0.8 W: 0.1 Inner electrode Ni Termination Cu Plating Sn 100% 10 10 % tolerance mm mm (Pb Free) Product Normal Special Reserved for future use Packaging Cardboard Type, 7" reel B. Samsung Reliablility Test and Judgement condition Performance Capacitance Tan (DF) Insulation Within specified tolerance Test condition 110% 0.50.1Vrms 60~120 sec. 0.1 max. 10,000Mohm or 100Mohm Whichever is Smaller Rated Voltage Resistance Appearance No abnormal exterior appearance Withstanding No dielectric breakdown or Microscope (x10) 250% of the rated voltage Voltage mechanical breakdown Temperature X5R Characterisitcs Adhesive Strength (From -55 to 85, Capacitance change shoud be within 15%) No peeling shall be occur on the 500gF, for 101 sec. of Termination terminal electrode Bending Strength Capacitance change : within 12.5% Bending to the limit (1mm) with 1.0mm/sec. Solderability More than 75% of terminal surface 1) Sn63Pb37 solder is to be soldered newly 2355, 50.5sec. 2) SnAg3.0Cu0.5 solder 2455, 30.3sec. (preheating : 80~120 for 10~30sec.) Resistance to Capacitance change : Soldering heat Tan , IR : initial spec. within 7.5% Solder pot : 2705, 101sec. Performance Vibration Test Capacitance change : within 5% Tan , IR : initial spec. Test condition Amplitude : 1.5mm From 10 to 55 (return : 1min.) 2hours x 3 direction (x, y, z) Humidity Capacitance change : within 12.5% 402, 90~95%RH, 500+12/-0hrs within 12.5% With rated voltage Tan : 0.125 max IR : 25* or Over Moisture Resistance Capacitance change : Tan : 0.125 max IR : High Temperature Capacitance change : Resistance Tan : 0.125 max IR : 402, 90~95%RH, 500+12/-0hrs 12.5* or Over within 12.5% With 100% of the rated voltage Max. operating temperature 25* or Over 1000+48/-0hrs Temperature Capacitance change : Cycling Tan , IR : initial spec. within 7.5% 1 cycle condition Min. operating temperature 25 Max. operating temperature 25 5 cycle test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5, 10sec. Max ) * For the more detail Specification, Please refer to the Samsung MLCC catalogue.