SFF2004G ........ SFF2008G 20.0 Amp. Glass Passivated Ultrafast Recovery Rectifier Current 20.0 A Voltage 200 to 600 V ITO-220AB 12 FEATURES Ultrafast recovery time for high efficiency Low power losses Low forward voltage drop High forward surge current capability Solder dip 260C, 10s Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC Meets MSL level 1, per J-STD-020, LF maximum peak of 260 C MECHANICAL DATA Case: ITO-220AB. Epoxy meets UL 94V-0 flammability rating. Polarity: As marked on the body. Mounting Torque: 10 in-lbs maximum. Terminals : Matte tin plated leads, solderable per MIL-STD-750 Method 2026, J-STD-002 and JESD22-B102. Consumer grade, meets JESD 201 class 1A whisker test. 3 PIN 1 PIN 3 PIN 2 TYPICAL APPLICATIONS Used in high frequency rectifier of switching mode power supplies, inverters, freewheeling diodes, dc-to-dc converters, and other power switching application. Maximun Ratings and Electrical Characteristics at 25C Marking Code VRRM Maximum Recurrent Peak Reverse Voltage (V) VRMS Maximum RMS Voltage (V) VDC IF(AV) IFSM Trr Cj SFF 2004G SFF2004G 200 140 SFF 2006G SFF2006G 400 280 SFF 2008G SFF2008G 600 420 200 400 600 Maximum DC Blocking Voltage (V) Maximum Average Forward Rectified Current @ Tc = 100 C Peak Forward Surge Current 8.3 ms. single Half Sine-wave Superimposed on Rated Load (JEDEC Method) Maximum Reverse Recovery Time From IF =0.5 A; IR = 1 A; IRR = 0.25 A 150 A Typical Junction Capacitance at 1MHz and reverse voltage of 4VDC 90 pF 20 A 35 nS Tj Operating Temperature Range 65 to + 150 C Tstg Storage Temperature Range 65 to + 150 C Electrical Characteristics at Tamb = 25 C VF Max. Instantaneous Forward Voltage @10.0 A (Note 2) IR Maximum DC Reverse Current @ Tc = 25 C at Rated DC Blocking Voltage @ Tc = 100 C Rthj-c Typical Thermal Resistance (Note 1) 0.975 V 1.3 V 10 A 400 A 1.7 V 2.5 C/W Note: 1. Mounted on Heatsink Size of 50.8 mm x 76.2 mm x 6.35 mm Al-Plate. 2. Pulse test: 300s pulse width, 1% duty cycle. www.fagorelectronica.com Document Name: sff20g Version: Nov-11 Page Number: 1/4 SFF2004G ........ SFF2008G 20.0 Amp. Glass Passivated Ultrafast Recovery Rectifier Ordering information PREFERRED P/N PACKAGE CODE DELIVERY MODE BASE QUANTITY UNIT WEIGHT (g) SFF2006GC 00TUC TU TUBE 2,000 2.02 Package Outline Dimensions: (mm) ITO-220AB REF. Marking code MC WWY www.fagorelectronica.com Document Name: sff20g Year code Week code A B C D E F F1 F2 G1 L2 L3 L4 L5 L7 DIA Min. 4.4 3.0 2.5 0.5 9.9 0.5 1.1 2.4 13.2 14.8 2.55 3.7 6.3 3.0 DIMENSIONS Milimeters Nominal 2.55 - Max. 4.7 3.16 2.8 0.76 10.3 0.9 1.4 1.8 2.7 13.8 15.5 2.85 4.1 6.9 3.4 Version: Nov-11 Page Number: 2/4 SFF2004G ........ SFF2008G 20.0 Amp. Glass Passivated Ultrafast Recovery Rectifier Ratings and Characteristics (Ta 25 C unless otherwise noted) MAXIMUM AVERAGE FORWARD CURRENT DERATING CURVE IF(AV), average forward current (A) 100 SFF2004G 30 10 3 SFF2006G 1 SFF2008G 0.3 0.1 Tj = 25 C Pulse Width = 300 s 1% Duty Cycle 0.03 0.01 0.4 0.6 0.8 1.2 1.0 1.4 1.6 1.8 16 12 8 4 0 0 50 100 150 Tc, case temperature (C) MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER DIODE TYPICAL JUNCTION CAPACITANCE PER DIODE 100 150 Tj = 125 C 8.3ms Single Half Sine Wawe JEDEC Method 120 90 60 30 0 20 VF, forward voltage (V) Cj, junction capacitance (pF) IFSM, peak forward surge current (A) IF, instantaneous forward current (A) TYPICAL FORWARD CHARACTERISTICS PER DIODE 1 2 10 5 20 50 90 Tj = 25 C 80 70 60 50 40 100 1 2 Number of cycles at 60 Hz 5 20 10 50 100 200 500 1000 VR, reverse voltage (V) IR, Instantaneous reverse current (A) TYPICAL REVERSE CHARACTERISTICS 1000 REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 50W NON INDUCTIVE 100 +0.5A Tj = 100 C 10 (+) 50vDC (APPROX) (-) Tj = 75 C 1 (-) DUT 1W NON INDUCTIVE OSCILLOSCOPE (NOTE 1) PULSE GENERATOR (NOTE 2) (+) 0 -0.25A -1.0A Tj = 25 C 0.1 trr 10W NON INDUCTIVE 0 20 40 NOTES: 1. Rise Time = 7ns max. Input Impedance = 1 megohm 22 pf 2. Rise Time = 10 ns max. Sourse Impedance = 50 ohms 60 80 100 120 1cm SET TIME BASE FOR 5/ 10ns/ cm 140 Percent of rated peak reverse voltage (%) www.fagorelectronica.com Document Name: sff20g Version: Nov-11 Page Number: 3/4 SFF2004G ........ SFF2008G 20.0 Amp. Glass Passivated Ultrafast Recovery Rectifier Disclaimer All product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. Fagor Electronica, S.Coop., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Fagor"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Fagor makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Fagor disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Fagor's knowledge of typical requirements that are often placed on Fagor products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Fagor's terms and conditions of purchase, including but nos limited to the warranty expressed therein. Except as expressly indicated in writing. Fagor products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Fagor product could result in personal injury or death. Customers using or selling Fagor products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Fagor and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attomeys fees, even if such claim alleges that Fagor or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Fagor personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Fagor, Product names and markings noted herein may be trademarks of their respective owners. www.fagorelectronica.com Document Name: sff20g Version: Nov-11 Page Number: 4/4