Surface Mount Fast Switching Diode Features: * * * * * Fast Switching Speed For General Purpose Switching Application Ultra-Small Surface Mount Package High Conductance Two "BAV70"Circuits in One Package Applications: For general purpose switching application Max. Rating @ Ta = 25C unless otherwise specified Parameter Symbol Limits Unit Vrrm Vrms Vr 75 V Vr(rms) 53 V Ifm 300 mA 2 1 A Peak repetitive reverse voltage Working peak reverse voltage DC reverse voltage RMS reverse voltage Forward continuous current Non-repetitive peak forward surge current @t =1s @t = 1s Average rectified output current Io 150 mA Power dissipation Pd 200 mW Rja 625 C/W Tj, Tstg -65 to +150 C Thermal resistance, junction to ambient Operating and storage temperature range Electrical Characteristics @ Ta = 25C unless otherwise specified Parameter Symbol Conditions Min. Max. Unit 75 - V Vf If = 1mA If = 10mA If = 50mA If = 150mA - 0.715 0.855 1 1.25 V Cj Vr = 0V, f = 1MHz - 2 pF trr If = Ir = 10mA, Irr = 0.1 x Ir, Rl = 100 - 3 ns V(br)r Ir = 100A Forward voltage Junction capacitance Reverse breakdown voltage Reverse recovery time www.element14.com www.farnell.com www.newark.com Page <1> 25/02/13 V1.0 Surface Mount Fast Switching Diode Typical Characteristics @ Ta = 25C unless otherwise specified Plastic surface mounted package www.element14.com www.farnell.com www.newark.com Page <2> 25/02/13 V1.0 Surface Mount Fast Switching Diode Soldering Footprint Package Information Device Package Shipping BAV70DW-7-F SOT-363 3,000 / Tape & Reel Part Number Table Description Part Number Surface Mount Fast Switching Diode BAV70DW-7-F Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <3> 25/02/13 V1.0