SmartLED(R) 0603 Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LS L296, LA L296, LO L296, LY L296 Released Besondere Merkmale Features * Gehausetyp: SMT Gehause 0603, farbloser diffuser Verguss * Besonderheit des Bauteils: kleinste Bauform 1,7 mm x 0,8 mm x 0,65 mm (LxBxH) * Wellenlange: 633 nm (super-rot), 615 nm (amber), 606 nm (orange), 587 nm (gelb) * Abstrahlwinkel: extrem breite Abstrahlcharakteristik (160) * Technologie: InGaAlP * optischer Wirkungsgrad: 7 lm/W (super-rot), 11 lm/W (amber, orange, gelb) * Gruppierungsparameter: Lichtstarke, Wellenlange * Verarbeitungsmethode: fur alle SMT-Bestucktechniken geeignet * Lotmethode: IR Reflow Loten und Wellenloten (TTW) * Vorbehandlung: nach JEDEC Level 2 * Gurtung: 8-mm Gurt mit 5000/Rolle, o180 mm * ESD-Festigkeit: ESD-sicher bis 2 kV nach JESD22-A114-D * Erweiterte Korrosionsfestigkeit: Details siehe Seite 10 * package: SMT package 0603, colorless diffused resin * feature of the device: smallest package 1.7 mm x 0.8 mm x 0.65 mm (LxWxH) * wavelength: 633 nm (super-red), 615 nm (amber), 606 nm (orange), 587 nm (yellow) * viewing angle: extremely wide (160) * technology: InGaAlP * optical efficiency: 7 lm/W (super-red), 11 lm/W (amber, orange, yellow) * grouping parameter: luminous intensity, wavelength * assembly methods: suitable for all SMT assembly methods * soldering methods: IR reflow soldering and TTW soldering * preconditioning: acc. to JEDEC Level 2 * taping: 8 mm tape with 5000/reel, o180 mm * ESD-withstand voltage: up to 2 kV acc. to JESD22-A114-D * Superior Corrosion Robustness: details see page 10 Anwendungen Applications * Informationsanzeigen im Auenbereich * Flache Hinterleuchtung (LCD, Mobile Phone, Schalter, Display) * Signal- und Symbolleuchten * Markierungsbeleuchtung (z.B. Stufen, Fluchtwege, u.a.) * outdoor displays * flat backlighting (LCD, cellular phones, switches, displays) * signal and symbol luminaire * marker lights (e.g. steps, exit ways, etc.) 2012-03-16 1 LS L296, LA L296, LO L296, LY L296 Bestellinformation Ordering Information Typ Emissionsfarbe Lichtstarke1) Seite 16 Lichtstrom2) Seite 16 Bestellnummer Type Color of Emission Luminous Intensity1) page 16 Luminous Flux2) page 16 IF = 20 mA IV (mcd) IF = 20 mA V (mlm) Ordering Code LS L296-N2Q1-1 LS L296-P2Q2-1 LS L296-N1Q2-1 super-red 35.5 ... 90.0 56.0 ... 112.0 28.0 ... 112.0 250 (typ.) 320 (typ.) 275 (typ.) Q65110A1753 Q65110A1755 Q65110A1754 LA L296-P2R1-1 LA L296-Q2R2-1 LA L296-P1R2-1 amber 56.0 ...140.0 90.0 ...180.0 45.0 ...180.0 400 (typ.) 500 (typ.) 445 (typ.) Q65110A3236 Q65110A3237 Q65110A3235 LO L296-P2R1-24 LO L296-Q2S1-24 LO L296-P1S1-24 orange 56.0 ... 140.0 90.0 ... 224.0 45.0 ... 224.0 400 (typ.) 640 (typ.) 530 (typ.) Q65110A1906 Q65110A1904 Q65110A1905 LY L296-P2R1-26 LY L296-Q2R2-26 LY L296-P1R2-26 yellow 56.0 ...140.0 90.0 ...180.0 45.0 ...180.0 400 (typ.) 500 (typ.) 445 (typ.) Q65110A1763 Q65110A1762 Q65110A1764 Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 5 fur nahere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Gurt geliefert. Z.B.: LY L296-P2R1-26 bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen P2, Q1, Q2 oder R1 enthalten ist. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt fur die Farben, bei denen Wellenlangengruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Wellenlangengruppe geliefert. Z.B.: LY L296-P2R1-26 bedeutet, dass auf dem Gurt nur eine der Wellenlangengruppen -2, -3, -4, -5 oder -6 enthalten ist (siehe Seite 5 fur nahere Information). Z.B.: LS L296-N2Q1-1 bedeutet, dass das Bauteil innerhalb der auf Seite 4 spezifizierten Grenzen geliefert wird. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Wellenlangengruppen nicht bestellt werden. Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 5 for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). E.g. LY L296-P2R1-26 means that only one group P2, Q1, Q2 or R1 will be shippable for any one reel. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. E.g. LY L296-P2R1-26 means that only 1 wavelength group -2, -3, -4, -5 or -6 will be shippable (see page 5 for explanation). E.g. LS L296-N2Q1-1 means that the device will be shiped within the specified limits as stated on page 4. In order to ensure availability, single wavelength groups will not be orderable. 2012-03-16 2 LS L296, LA L296, LO L296, LY L296 Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Werte Values LS, LA Einheit Unit LO, LY Betriebstemperatur Operating temperature range Top - 40 ... + 100 C Lagertemperatur Storage temperature range Tstg - 40 ... + 100 C Sperrschichttemperatur Junction temperature Tj + 110 C Durchlassstrom Forward current (TA=25C) IF 60 30 mA Stostrom Surge current t 10 s, D = 0.1, TA=25C IFM 0.5 0.25 A Sperrspannung3) Seite 16 Reverse voltage3) page 16 (TA=25C) VR Leistungsaufnahme Power consumption (TA=25C) Ptot Warmewiderstand Thermal resistance Sperrschicht/Umgebung4) Seite 16 Junction/ambient4) page 16 Sperrschicht/Lotpad Junction/solder point 2012-03-16 3 12 170 80 V mW Rth JA 500 K/W Rth JS 290 K/W LS L296, LA L296, LO L296, LY L296 Kennwerte Characteristics (TA = 25 C) Bezeichnung Parameter Wellenlange des emittierten Lichtes Wavelength at peak emission IF = 20 mA Symbol Symbol (typ.) Dominantwellenlange5) Seite 16 Dominant wavelength5) page 16 IF = 20 mA Werte Values Einheit Unit LS LA LO LY peak 645 622 610 591 nm dom 633 6 615 6 606* 587* nm -6/+3 -7/+8 Spektrale Bandbreite bei 50 % Irel max Spectral bandwidth at 50 % Irel max IF = 20 mA (typ.) 16 16 16 15 nm Abstrahlwinkel bei 50 % IV (Vollwinkel) Viewing angle at 50 % IV (typ.) 2 160 160 160 160 Grad deg. Durchlassspannung6) Seite 16 Forward voltage6) page 16 IF = 20 mA (min.) (typ.) (max.) VF VF VF 1.8 2.0 2.3 1.83 2.0 2.33 1.85 2.0 2.35 1.9 2.0 2.4 V V V Sperrstrom Reverse current VR = 12 V (typ.) (max.) IR IR 0.01 10 0.01 10 0.01 10 0.01 10 A A Temperaturkoeffizient von peak Temperature coefficient of peak IF = 20 mA; -10C T 100C (typ.) TCpeak 0.14 0.13 0.13 0.13 nm/K Temperaturkoeffizient von dom Temperature coefficient of dom IF = 20 mA; -10C T 100C (typ.) TCdom 0.05 0.06 0.07 0.10 nm/K Temperaturkoeffizient von VF Temperature coefficient of VF IF = 20 mA; -10C T 100C (typ.) TCV - 2.0 - 1.8 - 1.7 - 2.5 mV/K Optischer Wirkungsgrad Optical efficiency IF = 20 mA (typ.) opt 7 11 11 11 lm/W * Einzelgruppen siehe Seite 5 Individual groups on page 5 2012-03-16 4 LS L296, LA L296, LO L296, LY L296 Wellenlangengruppen (Dominantwellenlange)5) Seite 16 Wavelength Groups (Dominant Wavelength)5) page 16 Gruppe Group orange yellow min. max. min. max. Einheit Unit 2 600 603 580 583 nm 3 603 606 583 586 nm 4 606 609 586 589 nm 5 589 592 nm 6 592 595 nm Helligkeits-Gruppierungsschema Brightness Groups Helligkeitsgruppe Brightness Group Lichtstarke1) Seite 16 Luminous Intensity1) page 16 IV (mcd) N1 N2 P1 P2 Q1 Q2 R1 R2 S1 28.0 ... 35.5 35.5 ... 45.0 45.0 ... 56.0 56.0 ... 71.0 71.0 ... 90.0 90.0 ...112.0 112.0 ...140.0 140.0 ...180.0 180.0 ...224.0 Lichtstrom2) Seite 16 Luminous Flux2) page 16 V (mlm) 125 (typ.) 160 (typ.) 200 (typ.) 250 (typ.) 320 (typ.) 400 (typ.) 500 (typ.) 640 (typ.) 800 (typ.) Anm.: Die Standardlieferform von Serientypen beinhaltet entweder eine untere Familiengruppe, eine obere Familiengruppe oder eine Sammelgruppe, die aus nur mehreren Helligkeitsgruppen bestehen. Einzelne Helligkeitsgruppen sind nicht bestellbar. Note: The standard shipping format for serial types includes either a lower family group, an upper family group or a grouping of all individual groups of several brightness groups. Individual brightness groups cannot be ordered. Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: Q1-4 Example: Q1-4 Helligkeitsgruppe Brightness Group Wellenlange Wavelength Q1 4 Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe fur jede Selektion enthalten. Note: No packing unit / tape ever contains more than one group for each selection. 2012-03-16 5 LS L296, LA L296, LO L296, LY L296 Relative spektrale Emission2) Seite 16 Relative Spectral Emission2) page 16 V() = spektrale Augenempfindlichkeit / Standard eye response curve Irel = f (); TA = 25 C; IF = 20 mA OHL00235 100 Irel % 80 V 60 yellow orange amber super-red 40 20 0 400 450 500 550 600 650 nm 700 Abstrahlcharakteristik Radiation Characteristic Irel = f (); TA = 25 C 40 30 20 10 0 OHL01440 1.0 50 0.8 60 0.6 70 0.4 80 0.2 0 90 100 2012-03-16 1.0 0.8 0.6 0 0.4 6 20 40 60 80 100 120 LS L296, LA L296, LO L296, LY L296 Durchlassstrom2) Seite 16 Forward Current2) page 16 IF = f (VF); TA = 25 C Relative Lichtstarke2) 7) Seite 16 Relative Luminous Intensity2) 7) page 16 IV/IV(20 mA) = f (IF); TA = 25 C OHL00232 10 2 mA 5 OHL10233 10 1 IV I V (20 mA) IF 10 0 10 1 5 10 -1 10 0 5 10 -1 super-red yellow orange/amber 1 1.4 1.8 2.2 2.6 10 -2 10 0 3 V 3.4 10 1 mA 10 2 IF VF Relative Lichtstarke2) Seite 16 Relative Luminous Intensity2) IV/IV(25 C) = f (Tj); IF = 20 mA page 16 OHL00238 IV 2.0 IV (25 C) 1.6 orange yellow amber super-red 1.2 0.8 orange yellow amber super-red 0.4 0 -20 0 20 40 60 C 100 Tj 2012-03-16 7 LS L296, LA L296, LO L296, LY L296 Maximal zulassiger Durchlassstrom Max. Permissible Forward Current IF = f (T); TA: temp. ambient Maximal zulassiger Durchlassstrom Max. Permissible Forward Current IF = f (T); TS: temp. solder point OHL01454 70 I F mA I F mA super-red/amber 60 60 super-red/amber 50 50 R thjs = 290 K/W R thja = 500 K/W 40 40 yellow/orange 30 30 20 20 10 10 0 OHL01457 70 0 0 10 20 30 40 50 60 70 80 C 100 0 10 20 30 40 50 60 70 80 C 100 TS TA 2012-03-16 yellow/orange 8 LS L296, LA L296, LO L296, LY L296 Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 25 C LS, LA IF 0.6 A Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 85 C LS, LA OHL00615 t IF IF D = TP A T 0.5 OHL00616 0.30 tP t tP IF D = TP T D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.4 0.3 0.2 0.20 D= 0.15 0.10 0.1 0.05 0 -5 10 10 -4 10 -3 10 -2 10 -1 10 0 10 1 s 10 2 0 -5 10 10 -4 10 -3 10 -2 10 -1 10 0 10 1 s 10 2 tp tp Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 25 C LO, LY A Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 85 C LO, LY OHL00617 0.30 IF 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 t D = TP tP OHL00618 0.30 IF IF T A t D = TP tP IF T D= 0.20 0.15 0.10 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.20 D= 0.15 0.10 0.05 0.05 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp tp 2012-03-16 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 9 LS L296, LA L296, LO L296, LY L296 Mazeichnung8) Seite 16 Package Outlines8) page 16 5 7 max Cathode marking 1.3 (0.051) 0.1 (0.004) Cathode marking 1.7 (0.067) 0.1 (0.004) (0.002) 0.125 (0.005) +0.05 -0.03 (0.001) 0.8 (0.031) 0.1 (0.004) (0.001) 0.65 (0.026) +0.02 -0.05 (0.002) 0.7 (0.028) 0.05 (0.002) A C GPLY7057 Korrosionsfestigkeit besser als EN 60068-2-60 (method 4): mit erweitertem Korrosionstest: 40C / 90%rh / 15ppm H2S / 336h Corrosion robustness better than EN 60068-2-60 (method 4): with enhanced corrosion test: 40C / 90%rh / 15ppm H2S / 336h Verpackungseinheit 8-mm-Gurt 5000/Rolle, o180 mm Packing unit 8 mm tape 5000/reel, o180 mm 4 (0.157) 8 (0.315) 1.5 (0.059) 1.8 (0.071) Gurtung / Polaritat und Lage8) Seite 16 Method of Taping / Polarity and Orientation8) page 16 1.75 (0.069) 1.4 mg 3.5 (0.138) Gewicht / Approx. weight: C A 2 (0.079) 0.9 (0.035) 0.8 (0.031) OHAY1491 2012-03-16 10 LS L296, LA L296, LO L296, LY L296 Empfohlenes Lotpaddesign8) 9) Seite 16 Recommended Solder Pad8) 9) page 16 IR Reflow Loten IR Reflow Soldering Copper solder pad 0.8 (0.031) 0.8 (0.031) 0.8 (0.031) 0.8 (0.031) OHAPY606 Alternatives Lotpaddesign8) 9) Seite 16 Alternative Solder Pad8) 9) page 16 0.7 (0.028) 0.8 (0.031) 0.8 (0.031) 0.6 (0.024) 0.05 (0.002) Solder stencil aperture Copper solder pad 2012-03-16 0.7 (0.028) 0.05 (0.002) IR Reflow Loten IR Reflow Soldering 11 OHPY3832 LS L296, LA L296, LO L296, LY L296 Lotbedingungen Soldering Conditions Vorbehandlung nach JEDEC Level 2 Preconditioning acc. to JEDEC Level 2 Reflow Lotprofil fur bleifreies Loten Reflow Soldering Profile for lead free soldering (nach J-STD-020D.01) (acc. to J-STD-020D.01) OHA04525 300 C T 250 Tp 245 C 240 C tP 217 C 200 tL 150 tS 100 50 25 C 0 0 50 100 150 200 250 s 300 t Anm.: Das Gehause ist nicht fur nasschemische Reinigung geeignet. Note: Package not suitable for wetcleaning. Profile Feature Pb-Free (SnAgCu) Assembly Recommendation Max. Ratings Ramp-up Rate to Preheat* 25C to 150C 2 K/ s 3K/s Time ts from TSmin to TSmax (150C to 200C 100 s min. 60sec max. 120sec Ramp-up Rate to Peak*) 180C to TP 2 K/ s 3K/s ) Liquidus Temperture TL 217C Time tL above TL 80 s max. 100 s Peak Temperature TP 245 C max. 260 C Time tP within 5C of the specified peak temperature TP - 5K 20 s min. 10 s max. 30 s Ramp-down Rate* TP to 100C 3K/s 6 K / s maximum Time 25C to Peak temperature max. 8 min. All temperatures refer to the center of the package, measured on the top of the component * slope calculation T/t: t max. 5 s; fulfillment for the whole T-range 2012-03-16 12 LS L296, LA L296, LO L296, LY L296 Barcode-Produkt-Etikett (BPL) Barcode-Product-Label (BPL) OSRAM Opto BIN1: XX-XX-X-XXX-X LX XXXX Semiconductors RoHS Compliant (6P) BATCH NO: 1234567890 ML Temp ST 2 260 C R (1T) LOT NO: 1234567890 (9D) D/C: 1234 Pack: R18 DEMY 022 B_R999_1880.1642 R (X) PROD NO: 123456789(Q)QTY: 9999 (G) GROUP: XX-XX-X-X OHA04563 Gurtverpackung Tape and Reel W1 D0 P0 A N F W E 13.0 0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Gurtvorlauf: 400 mm Leader: 400 mm Gurtende: Trailer: 160 mm 160 mm OHAY0324 Tape dimensions in mm (inch) W 8 + 0.3 0.1 P0 P1 P2 D0 E F 4 0.1 2 0.05 2 0.05 1.5 + 0.1 1.75 0.1 3.5 0.05 (0.157 0.004) (0.079 0.002) (0.079 0.002) (0.059 + 0.004) (0.069 0.004) (0.138 0.002) Reel dimensions in mm (inch) A 180 (7) 2012-03-16 W Nmin W1 W2 max 8 (0.315) 60 (2.362) 8.4 + 2 (0.331 + 0.079) 14.4 (0.567) 13 LS L296, LA L296, LO L296, LY L296 Trockenverpackung und Materialien Dry Packing Process and Materials Moisture-sensitive label or print L VE el LE . see lab e H) nk, (R bla cod y If bar . dit RH mi % hu e ve /60 ed ag C ati rar ck rel 30 _ inf pa < % to ak of 90 urs d ). < ns (pe or urs d , Ho de cte itio Ho urs an bje ing C co 72 nd Ho urs 5 te C su ss 48 e Ho co ce 24 6 da e y 40 be tim C h l pro < tor tim e e or ). 23 tim at t wilnt l wit or fac C Flo s tim at or ca at re. Flo d tha ale el or nth nti Flo uiv du if: rea es l 4 5 Flo lab mo ide ce eq low g, l ve vic 5a is be de tin en 24 de , or pro ve l 6 Le e te co , g: un wh Le ve l ke r se da ba ed low ure Le ve mo % ba e ba al d Le ist ure en ref e e 10 ure tim for se ist ale op se for > se , Mo ure 3 ist is or . , is ha se Mo be nk ist nk rd g -03 Mo in n Flo r-p RH g, bla Mo ba TD po If blathi % kin Ca life s (if ar t. s wi 10 ba tor J-S thi, va p. elf Ye ar ek _ < e icat me , C 1 urs Ye er tem ted Sh at ed low uir > 1 WeHo un Aft Indno uir DE 1. dy d e 4 8 ref y is req 2. JE bo e Mo ore tim 16 req : C/ es dit2b a) tim e e St or mi IP ed or g is tim vic b) e Hu en Flo oror tim De 2a kin nc te Flo op a) 3. b) baere Flo or da e l 1 2 Flo If al ref tim ve l 2a 4. se d ve l 3 Le g an ve l Le Ba te ure Le ve Le ist ure Da ist ure Mo ure Mo istist Mo Mo Barcode label N RS ins VE ITI TO nta NSUC TIO U g coSEND CO Ais baRE TU MI CThIS SE MO TO OP M RA OS Humidity indicator Barcode label Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Comparator check dot WET If wet, examine units, if necessary bake units 15% If wet, examine units, if necessary bake units 10% 5% If wet, parts still adequately dry. change desiccant Humidity Indicator MIL-I-8835 AM OS R Desiccant OHA00539 Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte Bezuglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel "Gurtung und Verpackung" unter dem Punkt "Trockenverpackung". Hier sind Normenbezuge, unter anderem ein Auszug der JEDEC-Norm, enthalten. Note: Moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter "Tape and Reel" under the topic "Dry Pack". Here you will also find the normative references like JEDEC. Kartonverpackung und Materialien Transportation Packing and Materials Barcode label BA P) (6 M Y DE R 18 -1 -1 +Q P RO UP : G 01 4 C: D/ D EM Y 18 R -1 : Q + P -1 G R O U P: u L lt S iT Y O T6 P 7 L 6 (9 D ) D /C :0 14 4 (G ) E Bi D Bi n1 Bi n2 : Pn3 : Q 1: -1 20 M -2 2 L 0 Te 2a 22 m 3 24 0 p ST Ad 26 0 C R C R ditio 0 C R 07 PA 7 na RT l TE C KV XT AR (X ) PR O D NO : 20 00 (9 D) T LO (1 T) 5 14 2 110 0 (Q )Q TY : O TC 4 998 H 12 34 S S em R ic AM o n O d u p ct to o H rs NO 21 2100 0 AM 00 TY :2 )Q (X ) PR O D N O : (1 T) 11 00 LO T 14 2 N O 5 O SR (Q A 21 00 21 99 8 R ic N O : H 12 G O S em BA TC H 23 :1 (6 P) S 34 o M n O d u p cto to rs M M : el 23 G e Muster C (G ) M u L lt S iT Y O T6 P 7 L 6 E D Muster L NO :1 E V E L selab . , H) nk de co (R bla r If ba . ity id RH m hu 0% e e /6 d tiv C re ag la re fra ck 30 _ < in pa % k s of to 90 ea s ur d ). < ns or te (p d Ho ururs s , de g itio Ho an bjec co C 72 sin nd Ho ur 5 te 48 C su es e Ho co 24 6 da y 40 be oc tim e e C or ThISTU th r pr < ll tim SE ct ). O 23 oo r wi nt tim e at l wi fa r M O Fl oo tim s at at le C at e. ica PT l Fl th th va oo r ur O nt ad Fl oo s ui be on if: re w ed l 4 5 Fl la m ide ce eq lo g, oc ve l vi is in en de be 24 de or l 5a6 pr Le ve nt wh e te co , w, g: ve l Le ke r re ou se da ba ed flo Le ve tu re m % ba e ba al e Le r en re e ed re 10 ois stu ur e tim se fo al op se fo > , M oi r se st ur 3 is is ha se M oi st nk be k, oo . 03 rd g M oi in an in Fl RH g, r-p bla DM ba Ca po If bl th % kinr life is (if . ar ST f p. wi 10 ba to et ar ks s Jel r th va Ye m _ < cat m d, C ed 1 Ye ee ur iredi Sh te w, te at nt > 1 W Ho Af flody qu In no ire DE 1. e ou 4 8 re ed re qu JE 2. bo ity is M or tim e e 16 re C/ : es id 2b r a) St tim m IP ed oo r or g is tim e vic b) e r Hu Fl oo en tim De 2a kin nc te Fl oo r a) op 3. b) ba re Fl oo da e fe l 1 Fl If al re tim ve l 2 4. se d l 2a3 Le ve g an ve l e Le Ba te ur e Le ve Le Da oist stur e ur e M oi st ur M oi st M oi Nns IVE RS ai IT TO ntNS UC TIO ND U g coSE O Ais baRE IC M Q : -1 M -2 2 L 0 Te 2a 22 m 3 24 0 p ST Ad 26 0 C R C R0 ditio 0 C R PA 77 na RT l TE CK VA XT R: Bi Bi n1 Bi n2 : Pn3 : 120 Barcode label Packing Sealing label 2012-03-16 14 OHA02044 LS L296, LA L296, LO L296, LY L296 Revision History: 2012-03-16 Previous Version: 2009-12-07 Page Subjects (major changes since last revision) Date of change all color amber" added 2004-10-18 11 OS-IN-2008-017 2008-06-16 1, 10 additional information 2009-12-07 12 OS-IN-2012-005 2012-03-16 Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components10) page 16 may only be used in life-support devices or systems11) page 16 with the express written approval of OSRAM OS. 2012-03-16 15 LS L296, LA L296, LO L296, LY L296 Funoten: 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) Remarks: 1) Brightness groups are tested at a current pulse duration of 25 ms and a tolerance of 11%. Helligkeitswerte werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 11% ermittelt. Wegen der besonderen Prozessbedingungen bei der Herstellung von LED konnen typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes uberein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden konnen. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankundigung geandert. Die LED kann kurzzeitig in Sperrichtung betrieben werden. RthJA ergibt sich bei Montage auf PC-Board FR 4 (Padgroe 5 mm2 je Pad) Wellenlangen werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 1 nm ermittelt. Spannungswerte werden mit einer Stromeinpragedauer von 1 ms und einer Genauigkeit von 0,1 V ermittelt. Im gestrichelten Bereich der Kennlinien muss mit erhohten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden Mae werden wie folgt angegeben: mm (inch) Gehause halt TTW-Lothitze aus Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. 2) 3) 4) 5) 6) 2012-03-16 7) In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. 8) Dimensions are specified as follows: mm (inch) Package able to withstand TTW-soldering heat A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 9) 10) 11) Published by OSRAM Opto Semiconductors GmbH Leibnizstrae 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 16 Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. Driving the LED in reverse direction is suitable for short term application. RthJA results from mounting on PC board FR 4 (pad size 5 mm2 per pad) Wavelengths are tested at a current pulse duration of 25 ms and a tolerance of 1 nm. Forward voltages are tested at a current pulse duration of 1 ms and a tolerance of 0.1 V. Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered.