ZH CONNECTOR Emboss Emboss Tape Tape 1.5 1.5 mm mm pitch/Disconnectable pitch/Disconnectable Crimp Crimp style style connectors connectors ZH CONNECTOR Specifications * Current rating: 1.0 A AC/DC (AWG #26) * Voltage rating: 50 V AC/DC * Temperature range:-25 to +85 (including temperature rise in applying electrical current) * Contact resistance: Initial value/ 20 m max. After environmental tests/ 30 m max. * Insulation resistance: 500 M min. * Withstanding voltage: 500 VAC/minute * Applicable wire: AWG #32 to #26 * Applicable PC board thickness: 0.6 to 1.2 mm, 1.6 mm The ZH connector is very small with a mounting height of 5.6 mm and a thickness of only 3.5 mm. Contact retention lances on the housing make insertion easier, while the dimple at the center of the contact ensures reliable contact with the post. Compact, low profile design Housing lances Reliable contact construction Distortion resistant construction Compatible with the ZR insulation displacement connectors *In using the products,refer to "Handling Precautions for Terminals and Connectors" described on our website (Technical documents of Product information page). *RoHS2 compliance *Dimensional unit: mm * Contact JST for details. Standards (R) (R) (R) Recognized E60389 Certified LR20812 (R) PC board layout and Assembly layout (R) Through-hole type (viewed from soldering side) (7.1) 0.70.03 2.7 3.4 0.70.03 1.5 min. 1.50.05 (5.6) 2.2 min. 1.5 min. Side entry type 3.5 2.7 3.7 3.4 1.5 0.05 4.6 min. Top entry type 4.6 Note:1 . Tolerances are non-cumulative: 0.05 mm for all centers. 2. Hole dimension differ according to the type of PC board and piercing method.If PC boards made of hard material are used, the hole dimensions should be larger.The dimensions above should serve as a guideline. Contact JST for details. SMTtype (viewed from connector mounting side) 1.3 0.1 1.5 0.05 3.7 1.50.1 0.6 SM4 type Top entry type SM2 type Side entry type 0.9 0.05 0.7 min. 1 Note: 1 . N...Number of circuits 2. Tolerances are non-cumulative: 0.05 mm for all centers. 3. The dimensions above should serve as a guideline. Contact JST for details. 0.1 1.4 7.4 0.7 min. 3.7 1.9 0.1 1.5 1.10.1 0.05 4.3 Side entry type 2.5 max. 3.7 1.1+0.1 0 7.4 1.4 0.1 2 min. 1.5 0.05 0.7 min. 2.3 0.1 2 6.4 1.5x(N-1)+0.9 ZH CONNECTOR ZH1 Contact 4 2.2 0.5 Model No. 1 1.4 SZH-002T-P0.5 SZH-003T-P0.5 1.1 mm2 0.080.13 0.0320.08 Applicable wire AWG# Insulation O.D. (mm) Q'ty/ reel 2826 0.81.1 13,000 3228 0.50.9 16,000 ZH CONNECTOR 1.5 Material and Finish Phosphor bronze, tin-plated (reflow treatment) 0.3 RoHS2 compliance Contact SZH-002T-P0.5 SZH-003T-P0.5 Crimping machine Crimp applicator AP-K2N MKS-L Applicator Dies MK/SZH-002-05 MK/SZH-003-05 Crimp applicator with dies APLMK SZH002-05 APLMK SZH003-05 Note: Contact JST for fully automatic crimping applicator. Housing B No. of circuits 3.4 Circuit No.1 ZHR-2 ZHR-3 ZHR-4 ZHR-5 ZHR-6 ZHR-6(3.0) ZHR-7 ZHR-8 ZHR-9 ZHR-10 ZHR-11 ZHR-12 ZHR-13 2 A 1.5 3 1.5 0.3 4 5 6 6 4.2 6 7 5 3 2 1 8 9 0.3 10 11 12 <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. 13 Top entry type <3 circuits or more> B Side entry type B2B-ZR B3B-ZR B4B-ZR B5B-ZR B6B-ZR B7B-ZR B8B-ZR B9B-ZR B10B-ZR B11B-ZR B12B-ZR B13B-ZR S2B-ZR S3B-ZR S4B-ZR S5B-ZR S6B-ZR S7B-ZR S8B-ZR S9B-ZR S10B-ZR S11B-ZR S12B-ZR S13B-ZR 2 3 3.5 4 4.5 4.5 6 7 2.2 0.5 A 2.7 Note)3.4 A 1.5 2.7 Note)3.4 8 Circuit 1.5 No.1 1.5 2.2 9 10 11 12 13 7.5 1,000 6.0 9.0 1,000 7.5 10.5 1,000 15.0 18.0 1,000 9.0 12.0 1,000 10.5 13.5 1,000 12.0 15.0 1,000 13.5 16.5 1,000 15.0 18.0 1,000 16.5 19.5 1,000 18.0 21.0 1,000 Note) Note) B2B-ZR-3.4 B3B-ZR-3.4 B4B-ZR-3.4 B5B-ZR-3.4 B6B-ZR-3.4 B7B-ZR-3.4 B8B-ZR-3.4 B9B-ZR-3.4 B10B-ZR-3.4 B11B-ZR-3.4 B12B-ZR-3.4 B13B-ZR-3.4 S2B-ZR-3.4 S3B-ZR-3.4 S4B-ZR-3.4 S5B-ZR-3.4 S6B-ZR-3.4 S7B-ZR-3.4 S8B-ZR-3.4 S9B-ZR-3.4 S10B-ZR-3.4 S11B-ZR-3.4 S12B-ZR-3.4 S13B-ZR-3.4 Top entry type Side entry type Q'ty/box Top entry Side entry Side entry type type type-3.4 A B 1.5 4.5 2,000 2,000 2,000 3.0 6.0 2,000 2,000 1,000 4.5 7.5 2,000 2,000 2,000 6.0 9.0 2,000 1,000 1,000 7.5 10.5 2,000 1,000 1,000 9.0 12.0 1,000 1,000 1,000 10.5 13.5 1,000 1,000 1,000 12.0 15.0 1,000 1,000 1,000 13.5 16.5 1,000 1,000 1,000 15.0 18.0 1,000 500 500 16.5 19.5 1,000 500 500 18.0 21.0 500 500 500 Material and Finish 0.5 A 4.6 1.5 1.5 2.7 3.7 Note) 3.4 B JST Circuit No.1 1,000 4.5 Pin: Brass, copper-undercoated, tin-plated (reflow treatment) Wafer: Glass-filled PA 66, UL94V-0, natural (ivory) 2.4 Side entry type 1,000 6.0 Dimensions (mm) Model No. No. of circuits Top entry type 5 Circuit No.1 4.5 3.0 RoHS2 compliance Note: 1 . ZHR-6(3.0) is 6 circuits 3.0mm pitch plugged up. As for thishousing, only circuit No.1 is marked. 2. ZHR-6(3.0) is not UL/CSA approved. Through-hole type shrouded header 3.5 1.5 PA 66, UL94V-0, natural (white) (blank)...natural (white) K...black R...red E...blue M...green L...lemon yellow LE...light blue DO...dark orange H...gray B Q'ty/ bag Material and Finish ZHR-2-oo- <2 circuits> Dimensions (mm) A B Model No. 1.4 RoHS2 compliance This product displays (LF)(SN) on a label. Note: Headers with 3.4mm long solder tails, suited for the 1.6mm thick PC board. <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. B2B-ZR-3.4-oo(blank)...natural (ivory) K...black R...red E...blue M...green Y...Yellow 2 ZH CONNECTOR SMT type shrouded header SM2 type SM2 type Side entry type No. of circuits S2B-ZR-SM2-TF S3B-ZR-SM2-TF S4B-ZR-SM2-TF S5B-ZR-SM2-TF S6B-ZR-SM2-TF S7B-ZR-SM2-TF S8B-ZR-SM2-TF S9B-ZR-SM2-TF S10B-ZR-SM2-TF S11B-ZR-SM2-TF S12B-ZR-SM2-TF S13B-ZR-SM2-TF 2 3 4 5 B Circuit No.1 A 1.5 5 1.5 1.5 1 6 7 8 9 3.7 10 HJST 1.5 11 12 1 13 0.9 Model No. Side entry type Dimensions (mm) A B Q'ty/ reel 1.5 4.5 1,000 3.0 6.0 1,000 4.5 7.5 1,000 6.0 9.0 1,000 7.5 10.5 1,000 9.0 12.0 1,000 10.5 13.5 1,000 12.0 15.0 1,000 13.5 16.5 1,000 15.0 18.0 1,000 16.5 19.5 1,000 18.0 21.0 1,000 Material and Finish Pin: Brass, copper-undercoated, tin-plated (reflow treatment) Wafer: Glass-filled PA 46, UL94V-0, natural (ivory) RoHS2 compliance This product displays (LF)(SN) on a label. SM4 type SM4 type (withsolder tabs) Top entry type No. of circuits 2 B A 3 2.25 1.5 4 5 5 3.7 7 1.5 6 9 8 HJST Circuit No.1 10 11 12 13 Model No. Top entry type Side entry type B2B-ZR-SM4-TF B3B-ZR-SM4-TF B4B-ZR-SM4-TF B5B-ZR-SM4-TF B6B-ZR-SM4-TF B7B-ZR-SM4-TF B8B-ZR-SM4-TF B9B-ZR-SM4-TF B10B-ZR-SM4-TF B11B-ZR-SM4-TF B12B-ZR-SM4-TF B13B-ZR-SM4-TF S2B-ZR-SM4A-TF S3B-ZR-SM4A-TF S4B-ZR-SM4A-TF S5B-ZR-SM4A-TF S6B-ZR-SM4A-TF S7B-ZR-SM4A-TF S8B-ZR-SM4A-TF S9B-ZR-SM4A-TF S10B-ZR-SM4A-TF S11B-ZR-SM4A-TF S12B-ZR-SM4A-TF S13B-ZR-SM4A-TF Q'ty/reel Dimensions (mm) A B Top entry Side entry type type 1.5 6.0 1,000 1,000 3.0 7.5 1,000 1,000 4.5 9.0 1,000 1,000 6.0 10.5 1,000 1,000 7.5 12.0 1,000 1,000 9.0 13.5 1,000 1,000 10.5 15.0 1,000 1,000 12.0 16.5 1,000 1,000 13.5 18.0 1,000 1,000 15.0 19.5 1,000 1,000 16.5 21.0 1,000 1,000 18.0 22.5 1,000 1,000 Material and Finish Side entry type Pin: Brass, copper-undercoated, tin-plated (reflow treatment) Wafer: PA 6T, UL94V-0, natural (ivory) Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment) B A 5 2.25 1 3.7 1.5 Circuit No.1 1.5 RoHS2 compliance This product displays (LF)(SN) on a label. Note: 1 . PA 9T is used for some colored products. 2. The products listed above are supplied on embossed-tape. 3. Contact JST for the top entry type headers with suction cap. <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. HJST ex. S2B-ZR-SM4A-oo-TF(blank)...natural (ivory) K...black R...red E...blue M...green L...lemon yellow LE...light blue DO...dark orange DH...dark gray 3