Features Applications n Surface Mount SMA package n Standoff Voltage: 5 to 220 volts n Power Dissipation: 400 watts n RoHS compliant* n AEC-Q101 compliant** n Protection of power buses n Protection of I/O interfaces n Overvoltage transient protection n Telecom, computer, industrial and consumer electronics applications SMAJ-Q Transient Voltage Suppressor Diode Series General Information Agency Recognition Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-214AC (SMA) size format. The Transient Voltage Suppressor series offers a choice of Working Peak Reverse Voltage from 5 V up to 220 V. Typical fast response times are less than 1.0 picosecond from 0 V to Breakdown Voltage. Description UL File Number: E153537 Bourns(R) Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and the flat configuration minimizes roll away. Electrical Characteristics (@ TA = 25 C Unless Otherwise Noted) Parameter Minimum Peak Pulse Power Dissipation (TP = 1 ms) (Note 1,2) Peak Forward Surge Current 8.3 ms Single Half Sine Wave Superimposed on Rated Load (JEDEC Method) (Note 3) Operating Temperature Range Storage Temperature Range Symbol Value Unit PPK 400 Watts IFSM 40 Amps TJ -55 to +150 C -55 to +150 C TSTG 1. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 C per Pulse Derating Curve. 2. Mounted on 5.0 mm2 (0.03 mm thick) copper pads to each terminal. 3. 8.3 ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only). Electrical Characteristics (@ TA = 25 C Unless Otherwise Noted) Unidirectional Device Part No. SMAJ5.0A-Q SMAJ6.0A-Q SMAJ6.5A-Q SMAJ7.0A-Q SMAJ7.5A-Q SMAJ8.0A-Q SMAJ8.5A-Q SMAJ9.0A-Q SMAJ10A-Q SMAJ11A-Q SMAJ12A-Q SMAJ13A-Q SMAJ14A-Q SMAJ15A-Q SMAJ16A-Q Bidirectional Device Marking Part No. Marking HEQ HGQ HKQ HMQ HPQ HRQ HTQ HVQ HXQ HZQ IEQ IGQ IKQ IMQ IPQ SMAJ5.0CA-Q SMAJ6.0CA-Q SMAJ6.5CA-Q SMAJ7.0CA-Q SMAJ7.5CA-Q SMAJ8.0CA-Q SMAJ8.5CA-Q SMAJ9.0CA-Q SMAJ10CA-Q SMAJ11CA-Q SMAJ12CA-Q SMAJ13CA-Q SMAJ14CA-Q SMAJ15CA-Q SMAJ16CA-Q TEQ TGQ TKQ TMQ TPQ TRQ TTQ TVQ TXQ TZQ UEQ UGQ UKQ UMQ UPQ Breakdown Voltage VBR (Volts) @ IT Min. Max. (mA) 6.40 6.67 7.22 7.78 8.33 8.89 9.44 10.0 11.1 12.2 13.3 14.4 15.6 16.7 17.8 7.00 7.37 7.98 8.60 9.21 9.83 10.4 11.1 12.3 13.5 14.7 15.9 17.2 18.5 19.7 Working Peak Reverse Voltage Maximum Maximum Maximum Maximum Maximum Clamping Peak Clamping Peak Reverse Voltage Pulse Voltage Pulse Leakage @ Ipp Current @ Ipp Current @ VRWM VRWM (V) IR (A) 5.0 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10 11 12 13 14 15 16 800 800 500 200 100 50 20 10 5 1.0 1.0 1.0 1.0 1.0 1.0 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Notes: 1. Suffix `A' denotes a 5 % tolerance unidirectional device. 2. Suffix `CA' denotes a 5 % tolerance bidirectional device. (10/1000 s) (10/1000 s) (8/20 s) (8/20 s) Vc (V) Ipp (A) Vc (V) Ipp (A) 9.2 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 43.5 38.8 35.7 33.3 31.0 29.4 27.8 26.0 23.5 22.0 20.1 18.6 17.2 16.4 15.4 12.0 13.4 14.6 15.6 16.8 17.7 18.7 20.0 22.1 23.7 25.9 28.0 30.2 31.7 33.8 217.5 194.0 178.5 166.5 155.0 147.0 139.0 130.0 117.5 110.0 100.5 93.0 86.0 82.0 77.0 ~ Continued on next page ~ WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov *RoHS Directive 2015/863, Mar 31, 2015 and Annex. **"Q" part number suffix indicates AEC-Q101 compliance. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SMAJ-Q Transient Voltage Suppressor Diode Series Electrical Characteristics (@ TA = 25 C Unless Otherwise Noted) - Continued Unidirectional Device Part No. Marking Bidirectional Device Part No. Working Peak Reverse Voltage Maximum Reverse Leakage @ VRWM @ IT (mA) VRWM (V) IR (A) Breakdown Voltage VBR (Volts) Marking Min. Max. Maximum Clamping Voltage @ Ipp Maximum Peak Pulse Current Maximum Clamping Voltage @ Ipp Maximum Peak Pulse Current Vc (V) Ipp (A) Vc (V) Ipp (A) (10/1000 s) (10/1000 s) (8/20 s) (8/20 s) SMAJ17A-Q IRQ SMAJ17CA-Q URQ 18.9 20.9 1.0 17 1.0 27.6 14.5 35.9 72.5 SMAJ20A-Q IVQ SMAJ20CA-Q UVQ 22.2 24.5 1.0 20 1.0 32.4 12.3 42.1 61.5 SMAJ24A-Q IZQ SMAJ24CA-Q UZQ SMAJ18A-Q SMAJ22A-Q SMAJ26A-Q ITQ IXQ JEQ SMAJ28A-Q JGQ SMAJ33A-Q JMQ SMAJ40A-Q JRQ SMAJ45A-Q JVQ SMAJ51A-Q JZQ SMAJ30A-Q SMAJ36A-Q SMAJ43A-Q SMAJ48A-Q SMAJ54A-Q JKQ JPQ JTQ JXQ REQ SMAJ58A-Q RGQ SMAJ64A-Q RMQ SMAJ75A-Q RRQ SMAJ85A-Q RVQ SMAJ18CA-Q SMAJ22CA-Q SMAJ26CA-Q UTQ UXQ VEQ 20.0 24.4 26.7 28.9 SMAJ28CA-Q VGQ SMAJ33CA-Q VMQ SMAJ40CA-Q VRQ 44.4 SMAJ45CA-Q VVQ 50 SMAJ51CA-Q VZQ SMAJ30CA-Q SMAJ36CA-Q SMAJ43CA-Q SMAJ48CA-Q SMAJ54CA-Q VKQ VPQ VTQ 31.1 33.3 36.7 40 47.8 VXQ 53.3 WEQ 60 56.7 SMAJ58CA-Q WGQ 64.4 SMAJ64CA-Q WMQ 71.1 SMAJ75CA-Q WRQ SMAJ85CA-Q WVQ RZQ SMAJ100CA-Q WZQ SMAJ120A-Q SGQ SMAJ120CA-Q XGQ SMAJ150A-Q SMQ SMAJ150CA-Q XMQ SMAJ170A-Q SRQ SMAJ170CA-Q XRQ SMAJ200A-Q SVQ SMAJ200CA-Q XVQ SMAJ60A-Q SMAJ70A-Q SMAJ78A-Q RKQ RPQ RTQ SMAJ90A-Q RXQ SMAJ110A-Q SEQ SMAJ100A-Q SMAJ130A-Q SMAJ160A-Q SMAJ180A-Q SMAJ220A-Q SKQ SPQ STQ SXQ SMAJ60CA-Q SMAJ70CA-Q SMAJ78CA-Q SMAJ90CA-Q SMAJ110CA-Q SMAJ130CA-Q SMAJ160CA-Q SMAJ180CA-Q SMAJ220CA-Q WKQ WPQ WTQ WXQ 66.7 77.8 83.3 86.7 94.4 100 31.9 34.4 36.8 40.6 44.2 49.1 52.8 55.3 58.9 62.7 66.3 71.2 73.7 78.6 86.0 92.1 95.8 104 111 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 22 24 26 28 30 33 36 40 43 45 48 51 54 58 60 64 70 75 78 85 90 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 29.2 35.5 10.3 45.4 8.8 42.1 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103 113 121 1.0 137 1.0 11.3 38.9 1.0 1.0 13.7 126 146 9.5 8.3 7.5 6.9 6.2 5.8 5.5 38.0 46.2 50.6 54.7 59.0 62.9 69.3 75.5 83.9 90.2 94.5 68.5 56.5 51.5 47.5 44.0 41.5 37.5 34.5 31.0 29.0 27.5 5.2 100.6 4.6 113.2 23.0 125.8 20.5 4.9 107.1 4.3 121.7 3.9 133.9 4.1 3.5 3.3 3.2 2.9 2.7 146.9 157.3 163.8 178.1 189.8 26.0 24.5 21.5 19.5 17.5 16.5 16.0 14.5 13.5 1.0 100 1.0 162 2.5 210.6 133 147 1.0 120 1.0 193 2.1 250.9 10.5 1.0 150 315.9 8.0 XKQ 144 XXQ 29.5 1.0 18 123 122 XTQ 26.9 1.0 111 XEQ XPQ 22.1 167 178 189 201 224 246 135 159 185 197 209 222 247 272 1.0 1.0 1.0 1.0 1.0 1.0 1.0 110 130 160 170 180 200 220 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 177 209 243 259 275 292 324 356 2.3 1.9 1.6 1.5 1.5 1.4 1.2 1.1 230.1 271.7 336.7 357.5 379.6 421.2 462.8 12.5 11.5 9.5 7.5 7.5 7.0 6.0 5.5 Notes: 1. Suffix `A' denotes a 5 % tolerance unidirectional device. 2. Suffix `CA' denotes a 5 % tolerance bidirectional device. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SMAJ-Q Suppressor Diode Series 3312 - 2Transient mm SMDVoltage Trimming Potentiometer Performance Graphs Maximum Non-Repetitive Surge Current 100 75 50 25 10x1000WaveformasDefined byR.E.A. 0 25 0 50 75 45 PeakForwardSurgeCurrent(Amps) PeakPulsePowerDeratinginPercentof PeakPowerorCurrent Peak Pulse Power Derating Curve 100 125 40 35 30 25 20 15 PulseWidth8.3ms SingleHalfSine-Wave 10 5 0 150 10 1 Pulse Waveform Typical Junction Capacitance 10000 TR=10s Halfvalue= IRSM 2 Pulsewidth(TP) isdefinedasthatpoint wherethepeakcurrent decaysto50%ofIPSM. 50 10x1000waveform asdefinedbyR.E.A. TA=25C TP 0 CJ-JunctionCapacitance(pF) IP,PeakPulseCurrent(%) Bidirectional v-0v Peakvalue(IRSM) 100 0 1.0 2.0 3.0 1000 Unidirectional @VR Unidirectional v-0v 100 TJ=25C f=1.0MHz Vsig=50mVp-p 10 1 4.0 1 Bidirectional @VR 10 T,Time(ms) 100 1000 VBR-ReverseBreakdownVoltage(V) Pulse Rating Curve Steady State Power Derating Curve 10 1.0 SteadyStatePowerDissipation(W) PPPM-PeakPulsePower(kW) 100 NumberofCyclesat60Hz AmbientTemperature( C) 1.0 TA=25C Non-repetitive PulseWaveform ShowninPulseWaveformGraph 0.1 0.1s 0.8 0.6 0.4 0.2 0.0 1.0s 10s 100s Td,PulseWidth(Seconds) 1.0ms 10ms 0 25 50 75 100 125 150 TL-LeadTemperature(C) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SMAJ-Q Voltage Suppressor Diode Series 3312 Transient - 2 mm SMD Trimming Potentiometer Product Dimensions Recommended Footprint A A A B C A B B C G D Dimension A (Max.) FC H D E Dimension A B C D E F G H SMAMM (DO-214AC) DIMENSIONS: 3.99 - 4.50 (INCHES) (0.157 - 0.177) 2.54 - 2.79 E (0.100 - 0.110) 1.25 - 1.65 (0.049 - 0.065) MM DIMENSIONS: 0.15 - 0.31 (INCHES) (0.006 - 0.012) 4.93 - 5.28 (0.194 - 0.208) 0.203 MAX. (0.008) 1.98 - 2.29 (0.078 - 0.090) 0.76 - 1.52 (0.030 - 0.060) DIMENSIONS: F YWW XXX C (Min.) C SMA (DO-214AC) 2.70 (0.106) 2.10 (0.083) 1.27 (0.050) DIMENSIONS: MM (INCHES) Physical Specifications Case............................................Molded plastic per UL Class 94V-0 Polarity....................... Cathode band indicates unidirectional device No cathode band indicates bidirectional device How to Order SMAJ 12 CA - Q Package SMAJ = SMA/DO-214AC Working Peak Reverse Voltage 12 = 12 VRWM (Volts) Suffix A = 5 % Tolerance Unidirectional Device CA = 5 % Tolerance Bidirectional Device MM (INCHES) Typical Part Marking MANUFACTURER'S TRADEMARK B (Min.) B DATECODE: Y=LAST DIGITOF YEAR WW=WEEK NUMBER AEC-Q101 Suffix Q = AEC-Q101 Compliant, 13-inch Reel QH = AEC-Q101 Compliant, 7-inch Reel (available only for 12 V to 58 V models) Environmental Specifications Moisture Sensitivity Level.................................................................1 ESD Classification (HBM)............................................................. 3B DEVICEID Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SMAJ-Q Transient Voltage Suppressor Diode Series CDDFN5-0504N - TVS/Steering Diode Array Packaging Information The product will be dispensed in tape and reel format (see diagram below). P 0 P 1 d T E IndexHole 120 F D2 W B D1 D P Trailer ....... ....... End A Unidirectional Product Orientation C Device ....... ....... Leader ....... ....... ....... ....... 10pitches(min.) Carrier Width A Carrier Length B Carrier Depth C Sprocket Hole d Reel Outside Diameter D Reel Inner Diameter D1 Feed Hole Diameter D2 Sprocket Hole Position E Punch Hole Position F Punch Hole Pitch P Sprocket Hole Pitch P0 Embossment Center P1 Overall Tape Thickness T Tape Width W Reel Width W1 Quantity per Reel REV. 03/20 -- MM (INCHES) Devices are packed in accordance with EIA 481 standard specifications shown here. DirectionofFeed Symbol DIMENSIONS: 10pitches(min.) Item W1 Start 7-Inch Reel 178 (7.008) 1,000 SMA (DO-214AC) 2.90 0.20 (0.114 0.008) 5.50 0.20 (0.217 0.008) 2.26 0.20 (0.089 0.008) 1.50 0.10 (0.061 0.004) 50.0 MIN. (1.969) 13.0 0.20 (0.512 0.008) 1.75 0.10 (0.069 0.004) 5.50 0.05 (0.217 0.002) 4.00 0.10 (0.157 0.004) 4.00 0.10 (0.157 0.004) 2.00 0.05 (0.079 0.002) 0.30 0.10 (0.012 0.004) 12.00 0.30 (0.472 0.012) 18.4 MAX. (0.724) 13-Inch Reel 330 (12.992) 5,000 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns(R) products manufactured by or on behalf of Bourns, Inc. and its affiliates (collectively, "Bourns"). Unless otherwise expressly indicated in writing, Bourns(R) products and data sheets relating thereto are subject to change without notice. Users should check for and obtain the latest relevant information and verify that such information is current and complete before placing orders for Bourns(R) products. The characteristics and parameters of a Bourns(R) product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns' knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns(R) product in a user application may vary from the data sheet characteristics and parameters due to (i) the combination of the Bourns(R) product with other components in the user's application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns(R) product also can and do vary in different applications and actual performance may vary over time. Users should always verify the actual performance of the Bourns(R) product in their specific devices and applications, and make their own independent judgments regarding the amount of additional test margin to design into their device or application to compensate for differences between laboratory and real world conditions. Unless Bourns has explicitly designated an individual Bourns(R) product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any failure of an individual Bourns(R) product to meet the requirements of such industry standard or particular qualification. Users of Bourns(R) products are responsible for ensuring compliance with safety-related requirements and standards applicable to their devices or applications. Bourns(R) products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any Bourns(R) products in such unauthorized applications might not be safe and thus is at the user's sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and generally equivalent classifications outside of the United States. Bourns expressly identifies those Bourns(R) standard products that are suitable for use in automotive applications on such products' data sheets in the section entitled "Applications." Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns(R) standard products in an automotive application might not be safe and thus is not recommended, authorized or intended and is at the user's sole risk. If Bourns expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns(R) standard product is considered for potential use in automotive applications, it should only be used in such sub-category of automotive applications. Any reference to Bourns(R) standard product in the data sheet as compliant with the AEC-Q standard or "automotive grade" does not by itself mean that Bourns has approved such product for use in an automotive application. Bourns(R) standard products are not tested to comply with United States Federal Aviation Administration standards generally or any other generally equivalent governmental organization standard applicable to products designed or manufactured for use in aircraft or space applications. Bourns expressly identifies Bourns(R) standard products that are suitable for use in aircraft or space applications on such products' data sheets in the section entitled "Applications." Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns(R) standard product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the user's sole risk. The use and level of testing applicable to Bourns(R) custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns(R) custom products are specially designed. Absent a written agreement between Bourns and the user regarding the use and level of such testing, the above provisions applicable to Bourns(R) standard products shall also apply to such Bourns(R) custom products. Users shall not sell, transfer, export or re-export any Bourns(R) products or technology for use in activities which involve the design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use Bourns(R) products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions apply to all uses and applications that violate national or international prohibitions, including embargos or international regulations. Further, Bourns(R) products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns(R) products may not, without prior authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible to receive U.S. commodities, software, and technical data. To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential, incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties of fitness for particular purpose, non-infringement and merchantability. For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf C1753 05/17/18R