F-219 MPTC-01-80-01-01-01-L-RA-SD MPSC-01-24-01-01-01-L-RA-SD (5.00 mm) .197"(PWR) (2.00 mm) .079"(SIG) MPTC-RA, MPSC-RA SERIES 30 A RIGHT-ANGLE SIGNAL/POWER COMBO MPTC-RA Mates with: MPSC, MPCC MPSC-RA Mates with: MPTC MPTC PWR PINS SIG PINS PWR PINS 01 SPECIFICATIONS -01, -02 For complete specifications see www.samtec.com?MPTC or www.samtec.com?MPSC Insulator Material: Black LCP Terminal/Contact Material: Signal: Phosphor Bronze Power: Copper Alloy Plating: Sn or Au over 50 " (1.27 m) Ni Operating Temp Range: -55 C to +105 C Voltage Rating: Power: 600 VAC/848 VDC Signal: 450 VAC/636 VDC Standard Creepage: (2.86 mm) .113" (without -LC, power) MPTC: (2.59 mm) .101" (with -LC, power) MPSC: (2.60 mm) .102" (with -LC, power) Standard Clearance: MPTC: (2.72 mm) .107" (without -LC, power) (1.84 mm) .072" (with -LC, power) MPSC: (2.71 mm) .106" (without -LC, power) (1.85 mm) .073" (with -LC, power) RoHS Compliant: Yes Lead-Free Solderable: Yes -24 = Power Pins Per End -80 = Total Signal Pins (3.56) .140 DIA Note: Available standard power pin combinations: MPTC-01-XX-01 or MPTC-02-XX-02. A (12.27) .483 -02 (8.18) .322 (12.45) .490 (2.00) .0787 (0.40) .016 MPSC MPTC-RA/MPSC-RA CURRENT RATING (PER CONTACT) 1 28.8 A 2 24.7 A 3 24.1 A 4 22.3 A -T PLATING 01 02 03 (0.50) .020 PWR PINS -01, -02 = Power Pins Per End SIG PINS -24 = Total Signal Pins -80 = Total Signal Pins RECOGNITIONS A (15.06) .593 PWR PINS -L = Use with (1.60 mm) .062" Thick PCB = 10 " (0.25 m) Gold on contact, Matte Tin on tail (Power & Signal) -03 -T = Use with (2.36 mm) .093" Thick PCB = Matte Tin on contacts and tail (Power), Gold on contact, Matte Tin on tail (Signal) PINS PINS (35.25) (63.25) 1.388 2.490 (45.25) (73.25) 1.781 2.884 (3.25) .128 Note: Some sizes, styles and options are non-standard, non-returnable. 01 -01, -02 = Power Pins Per End Note: Available standard power pin combinations: MPSC-01-XX-01 or MPSC-02-XX-02. (3.56) .140 DIA -LC = Locking Clip (Manual placement required) TAIL LENGTH PLATING OPTION -01 RA -L = Use with (1.60 mm) .062" Thick PCB = 10 " (0.25 m) Gold on contact, Matte Tin on tail (Power & Signal) -03 -T = Use with (2.36 mm) .093" Thick PCB = Matte Tin on contacts and tail (Power), Gold on contact, Matte Tin on tail (Signal) OTHER OPTION -SD or -LC is a required callout -SD = Screw Down -LC = Locking Clip (Manual placement required) A POWER PINS/END 24 SIGNAL PINS 80 SIGNAL PINS (2.00) .0787 (1.88) .074 -SD = Screw Down Selectively loading contacts achieves customer specific creepage and clearance requirements. Contact asp@samtec.com (4.44) .175 (10.16) .400 -SD or -LC is a required callout CREEPAGE AND CLEARANCE (11.43) (2.50) .450 .098 FILE NO. E111594 OTHER OPTION (2.72) .107 (1.88) .074 (2.00) .0787 RA A POWER 24 80 PINS/END SIGNAL SIGNAL -01 POWER PINS For complete scope of recognitions see www.samtec.com/quality = Power Pins Per End (15.70) .618 PLATING OPTION -01 -01, -02 = Total Signal Pins TAIL LENGTH (2.72) .107 -01 -02 03 02 01 (0.41) (2.54) (0.50) (2.00) .0787 .016 .100 .020 SQ Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. (36.52) 1.438 (64.52) 2.540 (46.52) 1.831 (74.52) 2.934