Advanced Technical Information MITA15WB1200TMH Converter - Brake - Inverter Module Trench IGBT P P1 T1 D8 D10 D12 G3 D7 NTC1 L1 L2 L3 NTC2 N G4 = 1200 V VCES = 1200 V IDAVM25 = IC25 = 30 A IC25 = 30 A VCE(sat) = 1.8 V VCE(sat) = 1.8 V = 300 A D4 D6 EV Application: AC motor drives with Input Rectifier Bridge D8 - D13 Symbol Conditions Maximum Ratings VRRM IFAV IDAVM IFSM TC = 80C; sine 180 bridge output current; TC = 80C; rect.; d = 1/3 TVJ = 25C; t = 10 ms; sine 50 Hz Ptot TC = 25C Symbol Conditions 1600 V 22 62 300 A A A 50 W Characteristic Values (TVJ = 25C, unless otherwise specified) min. typ. max. 1.6 V V 0.01 mA mA 2.1 K/W K/W VF IF = 30 A TVJ = 25C TVJ = 125C 1.3 1.4 IR VR = VRRM TVJ = 25C TVJ = 125C 0.3 RthJC RthCH (per diode) IXYS reserves the right to change limits, test conditions and dimensions. (c) 2007 IXYS All rights reserved Pin configuration see outlines. EW Three Phase Inverter VCES IFSM W T6 G6 EU NB VRRM = 1600 V 90 A V T4 D2 G2 D5 0.7 * Input from single or three phase grid * Three phase synchronous or asynchronous motor * electric braking operation Features * High level of integration - only one power semiconductor module required for the whole drive * Inverter with Trench IGBTs - low saturation voltage - positive temperature coefficient - fast switching - short tail current * Epitaxial free wheeling diodes with hiperfast and soft reverse recovery * Industry standard package with insulated copper base plate and soldering pins for PCB mounting * Temperature sense included 20070129 Brake Chopper T2 GB D3 U T7 T5 G5 D1 B D9 D11 D13 Three Phase Rectifier T3 G1 -4 Advanced Technical Information MITA15WB1200TMH Equivalent Circuits for Simulation Output Inverter T1 - T6 Symbol Conditions VCES TVJ = 25C to 150C 1200 V VGES VGEM Continuous Transient 20 30 V V IC25 IC80 TC = 25C TC = 80C 30 21 A A RBSOA VGE = 15 V; RG = 75 W; TVJ = 125C Clamped inductive load; L = 100 H ICM = 30 VCEK < VCES A tSC (SCSOA) VCE = 720 V; VGE = 15 V; RG = 75 W TVJ = 125C; non-repetitive 10 s Rectifier Diode (typ. at TJ = 125C) V0 = 0.90 V; R0 = 12 mW Ptot TC = 25C 120 W T1 - T6 / D1 - D6 Symbol Conditions Characteristic Values (TVJ = 25C, unless otherwise specified) min. VCE(sat) IC = 15 A; VGE = 15 V; VGE(th) IC = 0.5 mA; VGE = VCE ICES VCE = VCES; VGE = 0 V; IGES VCE = 0 V; VGE = 20 V TVJ = 25C TVJ = 125C typ. max. 1.8 2.1 2.2 V V 6.5 V 0.6 mA mA 150 nA 5 TVJ = 25C TVJ = 125C td(on) tr td(off) tf Eon Eoff Inductive load, TVJ = 125C VCE = 600 V; IC = 15 A VGE = 15 V; RG = 75 Cies QGon VCE = 25 V; VGE = 0 V; f = 1 MHz VCE = 600 V; VGE = 15 V; IC = 15 A RthJC RthCH (per IGBT) 0.8 90 50 520 90 2.1 1.5 ns ns ns ns mJ mJ 1100 150 pF nC 1.1 0.35 K/W K/W Output Inverter D1 - D6 Symbol Conditions IF25 IF80 TC = 25C TC = 80C Symbol Conditions Maximum Ratings 24 16 Characteristic Values min. VF IF = 10 A; VGE = 0 V; IRM VR = 600 V; diF /dt = -400A/s RthJC RthCH (per diode) trr typ. TVJ = 25C TVJ = 125C max. 2.4 IF = 10 A; VGE = 0 V; TVJ = 125C 1.5 V V 16 125 A ns 1.6 0.55 IXYS reserves the right to change limits, test conditions and dimensions. (c) 2007 IXYS All rights reserved A A K/W K/W Conduction I R0 V0 D8 - D13 IGBT (typ. at VGE = 15 V; TJ = 125C) V0 = 0.9 V; R0 = 80 mW Free Wheeling Diode (typ. at TJ = 125C) V0 = 1.35 V; R0 = 41 mW T7 / D7 IGBT (typ. at VGE = 15 V; TJ = 125C) V0 = 0.9 V; R0 = 80 mW Free Wheeling Diode (typ. at TJ = 125C) V0 = 1.45 V; R0 = 63 mW Thermal Response PV TJ Rth1 Cth1 Rth2 Cth2 TC D8 - D13 Rectifier Diode (typ.) Cth1 = tbd J/K; Rth1 = tbd K/W Cth2 = tbd J/K; Rth2 = tbd K/W T1 - T6 / D1 - D6 IGBT (typ.) Cth1 = tbd J/K; Rth1 = tbd K/W Cth2 = tbd J/K; Rth2 = tbd K/W Free Wheeling Diode (typ.) Cth1 = tbd J/K; Rth1 = tbd K/W Cth2 = tbd J/K; Rth2 = tbd K/W 20070129 Maximum Ratings -4 Advanced Technical Information MITA15WB1200TMH Brake Chopper T7 Symbol Conditions VCES TVJ = 25C to 150C 1200 V VGES VGEM Continuous Transient 20 30 V V IC25 IC80 TC = 25C TC = 80C 30 20 A A RBSOA VGE = 15 V; RG = 75 W; TVJ = 125C Clamped inductive load; L = 100 H ICM = 30 VCEK < VCES A tSC (SCSOA) VCE = 720 V; VGE = 15 V; RG = 75 W TVJ = 125C; non-repetitive 10 s Ptot TC = 25C 120 W Symbol Conditions Maximum Ratings Characteristic Values (TVJ = 25C, unless otherwise specified) min. VCE(sat) IC = 15 A; VGE = 15 V; VGE(th) IC = 0.5 mA; VGE = VCE ICES VCE = VCES; VGE = 0 V; IGES VCE = 0 V; VGE = 20 V TVJ = 25C TVJ = 125C typ. max. 1.8 2.1 2.2 V V 6.5 V 0.5 mA mA 150 nA 5 TVJ = 25C TVJ = 125C td(on) tr td(off) tf Eon Eoff Inductive load, TVJ = 125C VCE = 600 V; IC = 15 A VGE = 15 V; RG = 75 Cies QGon VCE = 25 V; VGE = 0 V; f = 1 MHz VCE = 600 V; VGE = 15 V; IC = 15 A RthJC RthCH (per IGBT) 0.5 90 50 520 90 2.1 1.5 ns ns ns ns mJ mJ 1100 150 pF nC 1.1 0.35 K/W K/W Brake Chopper D7 Conditions VRRM TVJ = 25C to 150C IF25 IF80 TC = 25C TC = 80C Symbol Conditions Maximum Ratings typ. VF IF = 10 A; VGE = 0 V; TVJ = 25C TVJ = 125C 2.0 IR VR = VRRM TVJ = 25C TVJ = 125C IRM VR = 600 V; diF /dt = -400A/s IF = 10 A; TVJ = 125C RthJC RthCH 15 10 A A max. 3.1 V V 0.06 0.2 mA mA 13 100 A ns 2.5 0.85 IXYS reserves the right to change limits, test conditions and dimensions. (c) 2007 IXYS All rights reserved V Characteristic Values min. trr 1200 K/W K/W 20070129 Symbol -4 MITA15WB1200TMH Advanced Technical Information Temperature Sensor NTC Symbol Conditions R25 B25/50 Characteristic Values T = 25C min. typ. max. 4.75 5.0 3375 5.25 k K Module Symbol Conditions TVJ TVJM Tstg Operating Maximum Ratings VISOL IISOL < 1 mA; 50/60 Hz FC Mounting force Symbol Conditions C C C 2500 V~ 40...80 N Characteristic Values min. dS dA -40...+125 150 -40...+125 Creepage distance (towards heatsink) typ. 12.7 12 Weight max. mm mm 35 g Dimensions in mm (1 mm = 0.0394") 0,5 12 17 0,35 20,5 0,50 A 8,15 0,35 14 n4 55,9 48,26 44,45 35,56 31,75 27,94 26,37 24,13 20,32 17,78 16,51 8,89 40,6 39,6 45,6 NB B GB EW G6 EV G4 P EU G2 NTC1 G3 V 3,6 A ( 2:1 ) 0,635 G1 U P1 1,4 1,8 L1 IXYS reserves the right to change limits, test conditions and dimensions. (c) 2007 IXYS All rights reserved N L2 L3 NTC2 G5 W 20070129 1,2 31,75 22,86 19,05 17,78 10,16 8,89 6,35 2,54 2,2 26,6 23 25,6 12,4 12 -4