1
Revision Date: 11/4/2009
New Product
Silicon Zener Diode Series
1N746 thru 1N759, 1N4370A thru 1N4372A
Maximum Ratings
Operating Temperature: -65°C to +175°C
Storage Temperature: -65°C to +175°C
DC Power Dissipation: 500 mW @ +50°C
Power Derating: 4 mW / °C above +50°C
Forward Voltage @ 200mA: 1.1 volts maximum
Features
Available in JAN, JANTX and JANTXV
per MIL-PRF-19500/127
Double Plug Construction
• Metallurgically Bonded
Also available in DO-213 MELF style package
JEDEC NOMINAL ZENER MAXIMUM MAXIMUM MAXIMUM
TYPE ZENER TEST ZENER REVERSE CURRENT ZENER
NUMBER VOLTAGE CURRENT IMPEDANCE IR@ VRCURRENT
VZ@ IZT IZT (NOTE 3) IZM
(NOTE 1) (NOTE 2) ZZT@ IZT
VOLTS mA OHMS μA VOLTS mA
1N4370A 2.4 20 30 100 1.0 155
1N4371A 2.7 20 30 60 1.0 140
1N4372A 3.0 20 29 30 1.0 125
1N746A 3.3 20 28 5 1.0 120
1N747A 3.6 20 24 3 1.0 110
1N748A 3.9 20 23 2 1.0 100
1N749A 4.3 20 22 2 1.0 90
1N750A 4.7 20 19 5 1.5 85
1N751A 5.1 20 17 5 2.0 75
1N752A 5.6 20 11 5 2.5 70
1N753A 6.2 20 7 5 3.5 65
1N754A 6.8 20 5 2 4.0 60
1N755A 7.5 20 6 2 5.0 55
1N756A 8.2 20 8 1 6.0 50
1N757A 9.1 20 10 1 7.0 45
1N758A 10.0 20 17 1 8.0 40
1N759A 12.0 20 30 1 9.0 35
Electrical Specifications @ +25 ºC (Unless Otherwise Specified)
NOTE 1: Zener voltage tolerance on "A" suffix is +5%. No Suffix denotes +10% tolerance,
"C" suffix denotes +2% tollerance and "D" suffix denotes +1% tolerance.
NOTE 2: Zener voltage is measured with the device junction in thermal equilibrium at an ambient
temperature of 25°C + 3°C.
NOTE 3: Zener impedance is derived by superimposing on IZT A 60Hz rms a.c. current equal to 10% of IZT
Our passion for performance is defined by three
attributes represented by these three icons:
solution-minded, performance-driven and customer-focused.
Revision Date: 11/4/2009
Aeroflex / Metelics, Inc.
975 Stewart Drive, 54 Grenier Field Road,
Sunnyvale, CA 94085 Londonderry, NH 03053
Tel: (408) 737-8181 Tel: (603) 641-3800
Fax: (408) 733-7645 Fax: (603)-641-3500
Sales: 888-641-SEMI (7364)
Hi-Rel Components
9 Hampshire Street,
Lawrence, MA 01840
Tel: (603) 641-3800
Fax: (978) 683-3264
www.aeroflex.com/metelics-hirelcomponents
Aeroflex / Metelics, Inc. reserves the right to make changes to any products and services
herein at any time without notice. Consult Aeroflex or an authorized sales representative to
verify that the information in this data sheet is current before using this product. Aeroflex
does not assume any responsibility or liability arising out of the application or use of any
product or service described herein, except as expressly agreed to in writing by Aeroflex;
nor does the purchase, lease, or use of a product or service from Aeroflex convey a license
under any patent rights, copyrights, trademark rights, or any other of the intellectual rights
of Aeroflex or of third parties.
Copyright 2009 Aeroflex / Metelics. All rights reserved.
www.aeroflex.com/metelics metelics-sales@aeroflex.com
ISO 9001:2008
1N746 thru1N759A & 1N4370 thru1N4372A
(Including -1 Versions)
LEADED DESIGN DATA
CASE: Hermetically sealed, DO – 35
LEAD MATERIAL: Copper clad steel
LEAD FINISH: Tin / Lead
THERMAL RESISTANCE: (RθJEC): 250 ˚C/W maximum at L = .375 in
THERMAL IMPEDANCE: (ZθJX): 35˚C/W maximum
POLARITY: Diode to be operated with the banded (cathode) end positive
MOUNTING POSITION: Any
0.080
2.03
MAX
DIA
POLARITY
BAND
(CATHODE)
0.018 / 0.022
0.457 / 0.559 DIA
0.175
4.44 MAX
1.000
25.400 MIN
All dimensions in INCH
mm
1.000
25.400 MIN
Outline Drawing
Graphs