JAN2N3019S - ON Semiconductor L.L.C.

August, 2012 − Rev. 2

1Publication Order Number:

2N3019/D

2N3019, 2N3019S, 2N3700

Low Power Transistors

NPN Silicon

Features

•MIL−PRF−19500/391 Qualified

•Available as JAN, JANTX, and JANTXV

MAXIMUM RATINGS (TA = 25°C unless otherwise noted)

Characteristic Symbol Value Unit

Collector−Emitter Voltage VCEO 80 Vdc

Collector−Base Voltage VCBO 140 Vdc

Emitter−Base Voltage VEBO 7.0 Vdc

Collector Current − Continuous IC1.0 Adc

Total Device Dissipation @ TA = 25°C

2N3019, 2N3019S

2N3700

PT800

500

Total Device Dissipation @ TC = 25°C

2N3019, 2N3019S

2N3700

PT5.0

1.0

Operating and Storage Junction

Temperature Range

TJ, Tstg −65 to

+200

°C

THERMAL CHARACTERISTICS

Characteristic Symbol Max Unit

Thermal Resistance, Junction to Ambient

2N3019, 2N3019S

2N3700

RqJA 195

325

°C/W

Thermal Resistance, Junction to Case

2N3019, 2N3019S

2N3700

RqJC 30

150

°C/W

Stresses exceeding Maximum Ratings may damage the device. Maximum

Ratings are stress ratings only. Functional operation above the Recommended

Operating Conditions is not implied. Extended exposure to stresses above the

Recommended Operating Conditions may affect device reliability.

http://onsemi.com

COLLECTOR

BASE

EMITTER

TO−5

CASE 205AA

STYLE 1

2N3019

Device Package Shipping

ORDERING INFORMATION

JAN2N3019

JANTX2N3019 TO−5 Bulk

JANTXV2N3019

JAN2N3019S

JANTX2N3019S TO−39 Bulk

JANTXV2N3019S

TO−39

CASE 205AB

STYLE 1

2N3019S

TO−18

CASE 206AA

STYLE 1

2N3700

JAN2N3700

JANTX2N3700 TO−18 Bulk

JANTXV2N3700

2N3019, 2N3019S, 2N3700

http://onsemi.com

ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)

Characteristic Symbol Min Max Unit

OFF CHARACTERISTICS

Collector−Emitter Breakdown Voltage

(IC = 30 mAdc)

V(BR)CEO 80 −

Vdc

Emitter−Base Cutoff Current

(VEB = 5.0 Vdc)

(VEB = 7.0 Vdc)

IEBO −

−

nAdc

mAdc

Collector−Emitter Cutoff Current

(VCE = 90 Vdc)

ICEO −10 nAdc

Collector−Base Cutoff Current

(VCB = 140 Vdc)

ICBO −10 mAdc

ON CHARACTERISTICS (Note 1)

DC Current Gain

(IC = 0.1 mAdc, VCE = 10 Vdc)

(IC = 10 mAdc, VCE = 10 Vdc)

(IC = 150 mAdc, VCE = 10 Vdc)

(IC = 500 mAdc, VCE = 10 Vdc)

(IC = 1.0 Adc, VCE = 10 Vdc)

hFE 50

100

300

−

300

−

Collector−Emitter Saturation Voltage

(IC = 150 mAdc, IB = 15 mAdc)

(IC = 500 mAdc, IB = 50 mAdc)

VCE(sat) −

−

0.2

0.5

Vdc

Base−Emitter Saturation Voltage

(IC = 150 mAdc, IB = 15 mAdc)

VBE(sat) −1.1

Vdc

SMALL−SIGNAL CHARACTERISTICS

Magnitude of Small−Signal Current Gain

(IC = 50 mAdc, VCE = 10 Vdc, f = 20 MHz)

|hfe|

5.0 20

−

Small−Signal Current Gain

(IC = 1.0 mAdc, VCE = 5 Vdc, f = 1 kHz)

hfe 80 400

−

Output Capacitance

(VCB = 10 Vdc, IE = 0, 100 kHz ≤ f ≤ 1.0 MHz)

Cobo −12

Input Capacitance

(VEB = 0.5 Vdc, IC = 0, 100 kHz ≤ f ≤ 1.0 MHz)

Cibo −60

Noise Figure

(VCE = 10 Vdc, IC = 100 mAdc, Rg = 1 kW, PBW = 200 Hz)

−4.0

Collector−Base Time Constant

(VCB = 10 Vdc, IC = 10 mAdc, f = 79.8 MHz)

r’b,CC−400

SWITCHING CHARACTERISTICS

Pulse Response

(Reference Figure in MIL−PRF−19500/391)

ton + toff −30

1. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%.

2N3019, 2N3019S, 2N3700

http://onsemi.com

PACKAGE DIMENSIONS

TO−5 3−Lead

CASE 205AA

ISSUE B

STYLE 1:

PIN 1. EMITTER

2. BASE

3. COLLECTOR

SEATING

PLANE

B0.007 (0.18MM) C M

DIM MIN MAX MIN MAX

INCHESMILLIMETERS

A0.350 0.3708.89 9.40

B0.315 0.3358.00 8.51

C0.240 0.2606.10 6.60

D0.016 0.0210.41 0.53

E0.009 0.1250.23 3.18

F0.016 0.0190.41 0.48

N0.200 BSC5.08 BSC

H0.028 0.0340.71 0.86

J0.029 0.0400.73 1.02

K1.500 1.75038.10 44.45

L0.250 ---6.35 ---

M45 BSC45 BSC

R0.054 BSC1.37 BSC

P--- 0.050--- 1.27

NOTES:

1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.

2. CONTROLLING DIMENSION: INCHES.

3. DIMENSION J MEASURED FROM DIAMETER A TO EDGE.

4. LEAD TRUE POSITION TO BE DETERMINED AT THE GUAGE

PLANE DEFINED BY DIMENSION R.

5. DIMENSION F APPLIES BETWEEN DIMENSION P AND L.

6. DIMENSION D APPLIES BETWEEN DIMENSION L AND K.

7. BODY CONTOUR OPTIONAL WITHIN ZONE DEFINED BY DIMEN

SIONS A, B, AND T.

8. DIMENSION B SHALL NOT VARY MORE THAN 0.010 IN ZONE P.

T--- 0.030--- 0.76

U0.100 ---2.54 ---

DETAIL X

NOTE 5

NOTES 4 & 6

DETAIL X

NOTE 7

LEAD IDENTIFICATION

DETAIL

TO−39 3−Lead

CASE 205AB

ISSUE A

STYLE 1:

PIN 1. EMITTER

2. BASE

3. COLLECTOR

SEATING

PLANE

B0.007 (0.18MM) C M

DIM MIN MAX MIN MAX

INCHESMILLIMETERS

A0.350 0.3708.89 9.40

B0.315 0.3358.00 8.51

C0.240 0.2606.10 6.60

D0.016 0.0190.41 0.48

E0.009 0.1250.23 3.18

F0.016 0.0190.41 0.48

N0.200 BSC5.08 BSC

H0.028 0.0340.71 0.86

J0.029 0.0400.73 1.02

K0.500 0.58012.70 14.73

L0.250 ---6.35 ---

M45 BSC45 BSC

R0.054 BSC1.37 BSC

P--- 0.050--- 1.27

NOTES:

1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.

2. CONTROLLING DIMENSION: INCHES.

3. DIMENSION J MEASURED FROM DIAMETER A TO EDGE.

4. LEAD TRUE POSITION TO BE DETERMINED AT THE GUAGE

PLANE DEFINED BY DIMENSION R.

5. DIMENSION F APPLIES BETWEEN DIMENSION P AND L.

6. DIMENSION D APPLIES BETWEEN DIMENSION L AND K.

7. BODY CONTOUR OPTIONAL WITHIN ZONE DEFINED BY DIMEN

SIONS A, B, AND T.

8. DIMENSION B SHALL NOT VARY MORE THAN 0.010 IN ZONE P.

T--- 0.030--- 0.76

U0.100 ---2.54 ---

DETAIL X

NOTE 5

NOTES 4 & 6

DETAIL X

NOTE 7

LEAD IDENTIFICATION

DETAIL

2N3019, 2N3019S, 2N3700

http://onsemi.com

PACKAGE DIMENSIONS

TO−18 3−Lead

CASE 206AA

ISSUE A

STYLE 1:

PIN 1. EMITTER

2. BASE

3. COLLECTOR

SEATING

PLANE

B0.007 (0.18MM) C M

DIM MIN MAX MIN MAX

INCHESMILLIMETERS

A0.209 0.2305.31 5.84

B0.178 0.1954.52 4.95

C0.170 0.2104.32 5.33

D0.016 0.0210.41 0.53

E--- 0.030--- 0.76

F0.016 0.0190.41 0.48

N0.100 BSC2.54 BSC

H0.036 0.0460.91 1.17

J0.028 0.0480.71 1.22

K0.500 0.75012.70 19.05

L0.250 ---6.35 ---

M45 BSC45 BSC

R0.054 BSC1.37 BSC

P--- 0.050--- 1.27

NOTES:

1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.

2. CONTROLLING DIMENSION: INCHES.

3. DIMENSION J MEASURED FROM DIAMETER A TO EDGE.

4. LEAD TRUE POSITION TO BE DETERMINED AT THE GUAGE

PLANE DEFINED BY DIMENSION R.

5. DIMENSION F APPLIES BETWEEN DIMENSION P AND L.

6. DIMENSION D APPLIES BETWEEN DIMENSION L AND K.

7. BODY CONTOUR OPTIONAL WITHIN ZONE DEFINED BY DIMEN

SIONS A, B, AND T.

T--- 0.030--- 0.76

U0.100 ---2.54 ---

DETAIL X

NOTE 5

NOTES 4 & 6

DETAIL X

NOTE 7

LEAD IDENTIFICATION

DETAIL

ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks,

copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC

reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any

particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without

limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications

and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC

does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for

surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where

personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and

its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly,

any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture

of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

N. American Technical Support: 800−282−9855 Toll Free

USA/Canada

Europe, Middle East and Africa Technical Support:

Phone: 421 33 790 2910

Japan Customer Focus Center

Phone: 81−3−5817−1050

2N3019/D

LITERATURE FULFILLMENT:

Literature Distribution Center for ON Semiconductor

P.O. Box 5163, Denver, Colorado 80217 USA

Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada

Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada

Email: orderlit@onsemi.com

ON Semiconductor Website: www.onsemi.com

Order Literature: http://www.onsemi.com/orderlit

For additional information, please contact your local

Sales Representative