PHOTOCOUPLER PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 HIGH ISOLATION VOLTAGE SINGLE TRANSISTOR TYPE MULTI PHOTOCOUPLER SERIES NEPOC Series DESCRIPTION The PS2561A-1 is an optically coupled isolator containing a GaAs light emitting diode and an NPN silicon phototransistor to realize an excellent cost performance. The PS2561A-1 is in a plastic DIP (Dual In-line Package) and the PS2561AL-1 is lead bending type (Gull-wing) for surface mount. The PS2561AL1-1 is lead bending L1 type and the PS2561AL2-1 is lead bending L2 type (Gull-wing). FEATURES * High isolation voltage (BV = 5 000 Vr.m.s.) <R> * Ordering number of taping product: PS2561AL-1-F3 : 2 000 pcs/reel : PS2561AL2-1-E3: 1 000 pcs/reel * Pb-Free product <R> * Safety standards * UL approved: No. E72422 * CSA approved: No. CA 101391 (CA5A, CAN/CSA-C22.2 60065, 60950) * BSI approved: No. 7112/7420 * SEMKO approved: No. 903238 * NEMKO approved: No. P09210868 * DEMKO approved: No. 314999 * FIMKO approved: No. FI 25119 * DIN EN60747-5-2 (VDE0884 Part2) approved: No. 40008862 (Option) APPLICATIONS * Power supply * Telephone/FAX. * FA/OA equipment * Programmable logic controller Document No. PN10222EJ08V0DS (8th edition) Date Published September 2009 NS The mark <R> shows major revised points. The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field. PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 PACKAGE DIMENSIONS (UNIT : mm) DIP Type Long Creepage Distance Lead Bending Type (Gull-Wing) Long Creepage Distance (Gull-Wing) PHOTOCOUPLER CONSTRUCTION Parameter Unit (MIN.) Air Distance 7 mm Outer Creepage Distance 7 mm Inner Creepage Distance 4 mm Isolation Thickness 2 0.4 mm Data Sheet PN10222EJ08V0DS PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 MARKING EXAMPLE Data Sheet PN10222EJ08V0DS 3 PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 <R> ORDERING INFORMATION Part Number Order Number Solder Plating Specification Pb-Free Packing Style Magazine case 100 pcs Safety Standard Approval PS2561A-1 PS2561A-1-A PS2561AL-1 PS2561AL-1-A (UL, CSA, BSI, PS2561AL1-1 PS2561AL1-1-A SEMKO, NEMKO, PS2561AL2-1 PS2561AL2-1-A DEMKO, FIMKO PS2561AL-1-F3 PS2561AL-1-F3-A Embossed Tape 2 000 pcs/reel PS2561AL2-1-E3 PS2561AL2-1-E3-A Embossed Tape 1 000 pcs/reel PS2561A-1-V PS2561A-1-V-A Magazine case 100 pcs PS2561AL-1-V PS2561AL-1-V-A (VDE0884 Part2) PS2561AL1-1-V PS2561AL1-1-V-A Approved (option) PS2561AL2-1-V PS2561AL2-1-V-A PS2561AL-1-V-F3 PS2561AL-1-V-F3-A Embossed Tape 2 000 pcs/reel PS2561AL2-1-V-E3 PS2561AL2-1-V-E3-A Embossed Tape 1 000 pcs/reel PS2561A-1 PS2561A-1Y-A Special version PS2561AL-1 PS2561AL-1Y-A (Pb-Free and (UL, CSA, BSI, PS2561AL1-1 PS2561AL1-1Y-A Halogen Free) SEMKO, NEMKO, PS2561AL2-1 PS2561AL2-1Y-A PS2561AL-1-F3 PS2561AL-1Y-F3-A Embossed Tape 2 000 pcs/reel PS2561AL2-1-E3 PS2561AL2-1Y-E3-A Embossed Tape 1 000 pcs/reel PS2561A-1-V PS2561A-1Y-V-A Magazine case 100 pcs PS2561AL-1-V PS2561AL-1Y-V-A (VDE0884 Part2) PS2561AL1-1-V PS2561AL1-1Y-V-A Approved (option) PS2561AL2-1-V PS2561AL2-1Y-V-A PS2561AL-1-V-F3 PS2561AL-1Y-V-F3-A Embossed Tape 2 000 pcs/reel PS2561AL2-1-V-E3 PS2561AL2-1Y-V-E3-A Embossed Tape 1 000 pcs/reel Magazine case 100 pcs Standard products DIN EN60747-5-2 Standard products DEMKO, FIMKO Data Sheet PN10222EJ08V0DS PS2561A-1 approved) approved) DIN EN60747-5-2 *1 For the application of the Safety Standard, following part number should be used. 4 Application Part Number *1 PS2561A-1 PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 ABSOLUTE MAXIMUM RATINGS (TA = 25 C, unless otherwise specified) Parameter Symbol Ratings Unit Reverse Voltage VR 6 V Forward Current (DC) IF 30 mA 1.5 mW/ C PD 150 mW IFP 0.5 A Collector to Emitter Voltage VCEO 70 V Emitter to Collector Voltage VECO 5 V IC 30 mA 1.5 mW/ C PC 150 mW BV 5 000 Vr.m.s. Operating Ambient Temperature TA 55 to +100 C Storage Temperature Tstg 55 to +150 C Diode Power Dissipation Derating Power Dissipation Peak Forward Current Transistor *1 Collector Current Power Dissipation Delay Power Dissipation Isolation Voltage *2 PD/ C PC/ C *1 PW = 100 s, Duty Cycle = 1% *2 AC voltage for 1 minute at TA = 25 C, RH = 60% between input and output. Pins 1-2 shorted together, 3-4 shorted together. Data Sheet PN10222EJ08V0DS 5 PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 ELECTRICAL CHARACTERISTICS (TA = 25 C) Parameter Diode Symbol Conditions Forward Voltage VF IF = 10 mA Reverse Current IR VR = 5 V Terminal Capacitance Ct V = 0 V, f = 1.0 MHz Transistor Collector to Emitter Dark Current ICEO VCE = 70 V, IF = 0 mA Coupled Current Transfer Ratio (IC/IF)*1 CTR IF = 5 mA, VCE = 5 V Collector Saturation Voltage VCE (sat) IF = 10 mA, IC = 2 mA Isolation Resistance RI-O VI-O = 1.0 kVDC Isolation Capacitance CI-O V = 0 V, f = 1.0 MHz *2 tr Rise Time *2 Fall Time VCC = 10 V, IC = 2 mA, RL = 100 tf 50 to 400 (%) H : 80 to 160 (%) Q : 100 to 200 (%) W : 130 to 260 (%) L : 200 to 400 (%) *2 Test circuit for switching time 6 TYP. MAX. Unit 1.2 1.4 V 5 A 10 50 0.13 Data Sheet PN10222EJ08V0DS pF 100 nA 400 % 0.3 V 1011 0.4 pF 3 s 5 *1 CTR rank N : MIN. PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise specified) Remark The graphs indicate nominal characteristics. Data Sheet PN10222EJ08V0DS 7 PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 Remark 8 The graphs indicate nominal characteristics. Data Sheet PN10222EJ08V0DS PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 <R> TAPING SPECIFICATIONS (UNIT : mm) Data Sheet PN10222EJ08V0DS 9 PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 10 Data Sheet PN10222EJ08V0DS PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering * Peak reflow temperature 260 C or below (package surface temperature) * Time of peak reflow temperature 10 seconds or less * Time of temperature higher than 220 C 60 seconds or less * Time to preheat temperature from 120 to 180 C 120 30 s * Number of reflows Three * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (2) Wave soldering * Temperature 260 C or below (molten solder temperature) * Time 10 seconds or less * Preheating conditions 120 C or below (package surface temperature) * Number of times One (Allowed to be dipped in solder including plastic mold portion.) * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by soldering iron * Peak temperature (lead part temperature) 350 C or below * Time (each pins) 3 seconds or less * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (b) Please be sure that the temperature of the package would not be heated over 100 C. Data Sheet PN10222EJ08V0DS 11 PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 (4) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler's input and output or between collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. 3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler Check the setting values before use, since the forward current conditions at CTR measurement differ according to product. When using products other than at the specified forward current, the characteristics curves may differ from the standard curves due to CTR value variations or the like. This tendency may sometimes be obvious, especially below IF = 1 mA. Therefore, check the characteristics under the actual operating conditions and thoroughly take variations or the like into consideration before use. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. 12 Data Sheet PN10222EJ08V0DS PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 SPECIFICATION OF VDE MARKS LICENSE DOCUMENT Parameter Symbol Climatic test class (IEC 60068-1/DIN EN 60068-1) Spec. Unit 55/100/21 Dielectric strength maximum operating isolation voltage Test voltage (partial discharge test, procedure a for type test and random test) Upr = 1.5 UIORM, Pd 5 pC UIORM Upr 890 1 335 Vpeak Vpeak Test voltage (partial discharge test, procedure b for all devices) Upr = 1.875 UIORM, Pd 5 pC Upr 1 669 Vpeak Highest permissible overvoltage UTR 8 000 Vpeak Degree of pollution (DIN EN 60664-1 VDE0110 Part 1) Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303 Part 11)) 2 CTI Material group (DIN EN 60664-1 VDE0110 Part 1) 175 III a Storage temperature range Tstg -55 to +150 C Operating temperature range TA -55 to +100 C Ris MIN. Ris MIN. 1012 1011 Tsi Isi Psi 175 400 700 Ris MIN. 109 Isolation resistance, minimum value VIO = 500 V dc at TA = 25 C VIO = 500 V dc at TA MAX. at least 100 C Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Package temperature Current (input current IF, Psi = 0) Power (output or total power dissipation) Isolation resistance VIO = 500 V dc at TA = Tsi Data Sheet PN10222EJ08V0DS C mA mW 13 PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 14 Data Sheet PN10222EJ08V0DS PS2561A-1,PS2561AL-1,PS2561AL1-1,PS2561AL2-1 Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. * Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. * Do not burn, destroy, cut, crush, or chemically dissolve the product. * Do not lick the product or in any way allow it to enter the mouth.