4711AN
0 TO +100 THROUGH 0 TO +8000 VDC @ 1 WATT
C SERIES
Miniature, Regulated High Voltage Power Supplies
e-mail sales@emcohighvoltage.com
Web site www.emcohighvoltage.com
Phone (209) 223-3626 Fax (209) 223-2779
11126 Ridge Road, Sutter Creek CA 95685
We reserve the right to make changes without notification
The C Series is a line of miniature,
regulated high voltage power
supplies. The output voltage is
programmable via a 0 to +5 volt
control voltage. Temperature drift is
typically less than 50 PPM/°C. These
modules exhibit very low ripple,
noise, and EMI/RFI by utilizing a
quasi-sinewave oscillator, shielded
transformer, excellent filtering
techniques and an isolated steel
enclosure featuring a separate
grounding pin. An externally
accessible potentiometer provides
adjustable gain trim allowing for
individual calibration of units.
Positive and negative outputs are
standard, and delivery of small
quantities is available from stock.
Call, fax, or e-mail with your
requirements for immediate
attention. Technical assistance is
readily available.
RIPPLE INPUT CURRENT REGULATION
NO
LOAD
FULL
LOAD
NO
LOAD
FULL
LOAD
C01 0 to 100V 0 to 10 mA <0.03 % <0.75 % <8 mA <250 mA <0.10 % <0.10 %
C02 0 to 200V 0 to 5 mA <0.02 % <0.05 % <15 mA <200 mA <0.10 % <0.10 %
C02N 0 to -200V 0 to 5 mA <0.02 % <0.05 % <8 mA <210 mA <0.10 % <1.00 %
C03 0 to 300V 0 to 3.3 mA <0.0025 % <0.03 % <10 mA <175 mA <0.10 % <0.10 %
C05 0 to 500V 0 to 2 mA <0.002 % <0.004 % <16 mA <150 mA <0.07 % <0.10 %
C05N 0 to -500V 0 to 2 mA <0.005 % <0.005 % <20 mA <160 mA <0.50 % <0.50 %
C06 0 to 600V 0 to 1.67 mA <0.001 % <0.003 % <20 mA <150 mA <0.05 % <0.10 %
C06N 0 to -600V 0 to 1.67 mA <0.007% <0.007 % <30 mA <150 mA <0.50 % <0.25 %
C10 0 to 1,000V 0 to 1 mA <0.004 % <0.05 % <50 mA <150 mA <0.30 % <0.30 %
C10N 0 to -1,000V 0 to 1 mA <0.001 % <0.002 % <35 mA <175 mA <0.50 % <0.30 %
C12 0 to 1,250V 0 to 1 mA <0.002 % <0.004 % <35 mA <170 mA <0.10 % <0.10 %
C12N 0 to -1,250V 0 to 1 mA <0.002 % <0.003 % <50 mA <190 mA <.175 % <0.10 %
C15 0 to 1,500V 0 to 0.67 mA <0.001 % <0.002 % <50 mA <150 mA <0.10 % <0.10 %
C15N 0 to -1,500V 0 to 0.67 mA <0.001 % <0.002 % <60 mA <170 mA <0.20 % <0.20 %
C20 0 to 2,000V 0 to 0.5 mA <0.001 % <0.002 % <50 mA <150 mA <0.15 % <0.10 %
C20N 0 to -2,000V 0 to 0.5 mA <0.002 % <0.002 % <70 mA <190 mA <0.15 % <0.10 %
C30 0 to 3,000V 0 to 0.33 mA <0.02 % <0.08 % <60 mA <180 mA <0.20 % <0.05 %
C30N 0 to -3,000V 0 to 0.33 mA <0.02 % <0.20 % <75 mA <200 mA <0.30 % <0.075 %
C40 0 to 4,000V 0 to 0.25 mA <0.025 % <0.1 % <70 mA <150 mA <0.25 % <0.20 %
C40N 0 to -4,000V 0 to 0.25 mA <0.03 % <0.07 % <85 mA <200 mA <0.20 % <0.10 %
C50 0 to 5,000V 0 to 0.200 mA <0.1 % <0.1 % <80 mA <200 mA <0.25% <0.10 %
C50N 0 to -5,000V 0 to 0.200 mA <0.1 % <0.1 % <80 mA <200 mA <0.25% <0.10 %
C60 0 to 6,000V 0 to 0.166 mA <0.1 % <0.1 % <100 mA <200 mA <0.25% <0.10 %
C60N 0 to -6,000V 0 to 0.166 mA <0.1 % <0.1 % <100 mA <225 mA <0.25% <0.15 %
C80 0 to 8,000V 0 to 0.125 mA <0.2 % <0.2 % <100 mA <250 mA <0.75% <0.15 %
C80N 0 to -8,000V 0 to 0.125 mA <0.2 % <0.2 % <100 mA <250 mA <0.75% <0.15 %
C25 0 to 2,500V 0 to 0.4 mA <0.025 % <0.10 % <40mA <150mA <0.30 % <0.20 %
C25N 0 to -2,500V 0 to 0.4 mA <0.02 % <0.08 % <50mA <160mA <0.30 % <0.20 %
MODEL
A
B
C
OUTPUT
VOLTAGE
OUTPUT
CURRENT
CASE
LINE
11.5 TO 16.0V
LOAD
0 to 100%
D
FEATURES
Low Ripple
Miniature Size
Regulated
0 To 100% Programmable Output
High Stability, Typically <50 PPM/o C
Wide Input Voltage Range, 11.5 To 16 V
Very Low EMI/RFI
Steel Case With Isolated Case Ground
External Gain Adjust
ELECTRICAL SPECIFICATIONS
Input Voltage: 11.5 To 16 Volts
Input Current: See Table
Control Voltage: 0 To +5 Volts, <100 µA
Operating Temperature: -10° To +60° C
Storage Temperature: -20° To +90° C
Case Sizes:
A: 1.40” x 1.10” x .50” (35.56 x 27.94 x 12.70mm)
B: 1.75” x 1.10” x .50” (44.45 x 27.94 x 12.70mm)
C: 2.10” x 1.10” x .50” (53.34 x 27.94 x 12.70mm)
D: 2.50” x 1.25” x .60” (63.50 x 31.75 x 15.24mm)
1
4
3
2
Control
0 to 5V
(All Models)
HV Out
0 to 100%
11.5 to 16V Input
Ground
5
Case Ground
(must be grounded)
SCHEMATICAL EQUIVALENT
PRODUCT SELECTION TABLE
0 TO +100 THROUGH 0 TO +8000 VDC @ 1 WATT
C SERIES
e-mail sales@emcohighvoltage.com
Web site www.emcohighvoltage.com
Phone (209) 223-3626 Fax (209) 223-2779
11126 Ridge Road, Sutter Creek CA 95685
FUNCTIONAL BLOCK DIAGRAM
HV OUT
0 to 100%
CONTROL
0 to 5 V
GROUND OSCILLATOR
RECTIFIER FILTER
GAIN
ADJUST
V IN
CASE
(MUST BE GROUNDED)
NOTES: 1OFF TIME MEASURED USING RESISTIVE LOAD.
TYPICAL PERFORMANCE
MODEL INTERNAL OSCILLA- % TRIM CONTROL RESPONSE TIME
FREQUENCY GAIN ADJUST ON OFF1
C01 200 KHZ - 250 KHZ 10 % 2 mS 1.5 mS
C02 250 KHZ - 334 KHZ 11 % 3.5 mS 4 mS
C02N 91 KHZ - 143 KHZ 5 % 30 mS 35 mS
C03 200 KHZ - 285 KHZ 10 % 16 mS 12 mS
C05 250 KHZ - 334 KHZ 10 % 25 mS 35 mS
C05N 200KHZ - 334 KHZ 11 % 30 mS 30 mS
C06 250 KHZ - 285 KHZ 12 % 30 mS 35 mS
C06N 142 KHZ - 200 KHZ 12 % 25 mS 35 mS
C10 200 KHZ - 250 KHZ 7 % 60 mS 80 mS
C10N 111 KHZ - 125 KHZ 7 % 70 mS 70 mS
C12 100 KHZ - 125 KHZ 8 % 60 mS 100 mS
C12N 91 KHZ - 100 KHZ 8 % 80 mS 100 mS
C15 91 KHZ - 111 KHZ 10 % 50 mS 120 mS
C15N 91 KHZ to 100 KHZ 10 % 60 mS 140 mS
C20 125 KHZ - 142 KHZ 5 % 100 mS 300 mS
C20N 91 KHZ - 100 KHZ 5 % 140 mS 500 mS
C30 77 KHZ - 100 KHZ 9 % 35 mS 120 mS
C30N 84 KHZ - 91 KHZ 10 % 60 mS 140 mS
C40 72 KHZ - 125 KHZ 6 % 90 mS 160 mS
C40N 77 KHZ - 100 KHZ 6 % 160 mS 160 mS
C50 90 KHZ - 145 KHZ 5 % 140 mS 200 mS
C50N 140 KHZ - 170 KHZ 5 % 140 mS 180 mS
C60 125 KHZ - 160 KHZ 5 % 100 mS 250 mS
C60N 140 KHZ - 170 KHZ 5 % 60 mS 60 mS
C80 100 KHZ - 150 KHZ 10 % 200 mS 250 mS
C80N 100 KHZ - 150 KHZ 10 % 200 mS 250 mS
C25 125 KHZ - 142 KHZ 9 % 35 mS 35 mS
C25N 125 KHZ - 142 KHZ 9 % 35 mS 35 mS
e-mail sales@emcohighvoltage.com
Web site www.emcohighvoltage.com
Phone (209) 223-3626 Fax (209) 223-2779
11126 Ridge Road, Sutter Creek CA 95685
0 TO +100 THROUGH 0 TO +8000 VDC @ 1 WATT
C SERIES
ADJUST
GAIN
4
1
3
2
5
5 PLACES.
.031 (.79) DIA
PC PIN
ADJUST
GAIN
4
31
2
5
CONTROL
0−5V
3
GROUND
2
5
0−100%
HV OUT
4
11.5 TO 16V INPUT
1
4
3
1
2
5
11.5 TO 16V INPUT
2
CONTROL
0−5V
3
1
GROUND 5
0−100%
HV OUT
4
.20 (5.08)
.50 (12.70)
1.10
1.40 (35.56)
.75 (19.05)
.35(8.89) .25 (6.35)
.16 (4.06)
0.00
.20 (5.08)
.25 (6.35)
0.00
.35 (8.89)
.60 (15.24)
.70 (17.78)
1.05 (26.67)
1.75 (44.45)
1.10
.50 (12.70)
.20 (5.08)
.75 (19.05)
.35 (8.89) .25 (6.35)
.15 (3.81)
0.00
.20 (5.08)
.25 (6.35)
0.00
.68 (17.27)
.85 (21.59)
1.00 (25.40)
1.35 (34.29)
CASE GROUND
0.00
.15 (3.81) .25
.35 (8.89)
.75 (19.05)
0.00
.68 (17.27)
.85 921.59)
1.00 (25.40)
1.35 (34.29)
PCB LAYOUT
COMPONENT SIDE
.187 (4.75) MIN DIA
FOR POT ACCESS
PCB LAYOUT
COMPONENT SIDE
0.00
.365 (9.27)
.60 (15.24)
.70 (17.78)
1.05 (26.67)
0.00
.165 (4.19)
.35 (8.89)
.75 (19.05)
.25 (6.35)
.187 (4.75) MIN DIA
FOR POT ACCESS
1
2
3
4
5
2.60 (66.04)
2.35 (59.69)
2.10 (53.34)
1.10 (27.94)
#2/M3 CLEARANCE
MOUNTING HOLES
2 PLACES.
.50 (12.70)
.20 (5.08)
PC PIN .040 (1.02)
5 PLACES
HIGH VOLTAGE
OUTPUT LEAD
10.00 (254.00) MIN
.50 (12.70)
.10 (2.54)
0.00
.25 (6.35)
.45 (11.43)
.10 (2.54)
2
5
1
3
4
GAIN
ADJUST
11.5V TO 16V INPUT
HV OUT
0−100%
(FLYING LEAD)
1
2
3
4
5
CONTROL
0−5V
GROUND CASE GROUND
HV RETURN
1.20 (30.48)
1.07 (27.18)
0.00
.18 (4.57)
.35 (8.89)
.50 (12.7)
.85 (21.59)
1.15 (29.21)
.25 (6.35)
.10 (2.54) 0.00
.10 (2.54)
.50 (12.70)
.187 (4.75) MIN DIA
FOR POT ACCESS
1.20 (30.48)
0.00
.18 (4.57)
.35 (8.89)
.50 (12.70)
.85 (21.59)
1.15 (29.21)
PCB LAYOUT
COMPONENT SIDE
CASE GROUND
PC PIN
.031 (.79)
5 PLACES.
1
2
3
4
5
C01-C20 POS & NEG
C25-C40 POS & NEG
C50-C60 POS & NEG
EMCO
MODEL
High Voltage Corporation
CODE
MFG
www.emcohighvoltage.com
High Voltage Corporation
MODEL
CODE
MFG
www.emcohighvoltage.com
EMCO
High Voltage Corporation
MODEL
CODE
MFG
www.emcohighvoltage.com
EMCO
CASE A
WEIGHT 1.1 oz (31.0g)
WEIGHT 1.3 oz (37.0g)
CASE B
CASE C
WEIGHT 1.8 oz (51.0g)
SEALED TO WITHSTAND
IMMERSION
CLEANING PROCESSES
SEALED TO WITHSTAND
IMMERSION
CLEANING PROCESSES
SEALED TO WITHSTAND
IMMERSION
CLEANING PROCESSES
(27.94)
DANGER
HIGH VOLTAGE
(6.35)
HIGH VOLTAGE
DANGER
(27.94)
DANGER
HIGH VOLTAGE
Dimensions are in Inches
Dimensional Tolerances: ± .03 (.76mm)
(Metric Equivalents in Parenthesis)
Dimensions are in Inches
Dimensional Tolerances: ± .03 (.76mm)
(Metric Equivalents in Parenthesis)
Dimensions are in Inches
Dimensional Tolerances: ± .03 (.76mm)
(Metric Equivalents in Parenthesis)
C80 POS & NEG
MOUNTING HOLES
#2/M2 CLEARANCE
.53 (13.34)
.10 (2.54)
.50 (12.70)
10.00 (254.00) +/−1.00 (25.4)
OUTPUT LEAD
HIGH VOLTAGE
1.25 (31.75)
PC PIN .040 (1.02) .20 (5.08)
.18 (4.57)
ADJUST
3
1.47 (37.34)
5 PLACES
1.60 (40.64)
0.00 4
0.00
GAIN
.85 (21.59)
.50 (12.7)
.35 (8.89)
1.15 (29.21)
5
2
1
.25 (6.35)
.10 (2.54)
2.50 (63.50)
2.75 (69.85)
3.00 (76.20)
.60 (15.24)
2 PLACES.
.85 (21.59)
11.5V TO 16V INPUT
.50 (12.70)
.35 (8.89)
.18 (4.57)
1.60 (40.64)
.50 (12.70)
.10 (2.54)
.10 (2.54)
.25 (6.35)
FOR POT ACCESS
.187 (4.75) MIN DIA
2
4
0.00
3
1
1
COMPONENT
PCB LAYOUT
GROUND
CONTROL
3
0−5V
2
1.15 (29.21)
0.00
5
HV RETURN
CASE
(FLYING LEAD)
0−100%
HV OUT
4
5GROUND
EMCO
MODEL
High Voltage Corporation
CODE
MFG
www.emcohighvoltage.com
CASE D
SEALED TO WITHSTAND
IMMERSION
CLEANING PROCESSES
SIDE
DANGER
HIGH VOLTAGE
WEIGHT 2.0 oz (50.8g)
e-mail sales@emcohighvoltage.com
Web site www.emcohighvoltage.com
Phone (209) 223-3626 Fax (209) 223-2779
11126 Ridge Road, Sutter Creek CA 95685
0 TO +100 THROUGH 0 TO +8000 VDC @ 1 WATT
C SERIES
Dimensions are in Inches
Dimensional Tolerances: ± .03 (.76mm)
(Metric Equivalents in Parenthesis)
PROG
INPUT
High Voltage Output
4
1 Diode provides reverse polarity protection.
2 Capacitor reduces ripple.
3 Resettable fuse (Raychem P/N RXE020,025 or 030) provides indefinite short circuit protection. Selection depends
on model used, load characteristics and operating temperature range.
4 Series resistance increases arc protection and reduces ripple (when used with an output capacitor).
5 Capacitor reduces ripple.
6 IMPORTANT: Keep Input, Programming and Output return paths separate to eliminate ground loop accuracy errors.
7 Conformal coating recommended on all exposed high voltage conductors.
8 Diode provides protection against negative programming voltage or negative transient spike.
6
Programming
Input
0 to +5 VDC
_
+
GROUND
5CASE
GROUND
HV
OUTPUT
Output Return
Load
5
EMCO
C SERIES
Improved Performance and Protection
+
_
Input
11.5 to 16.0 VDC 100µF
3
+ INPUT
1
+2
13
7
8
