FEATURES
● Super fast switching time for high efficiency
●Low forward voltage drop and
high current capability
●Low reverse leakage current
●Plastic material has UL flammability
classification 94V-0
MECHANICAL DATA
●Case： Molded Plastic
●Polarity: lndicated by cathode band
●Weight: 0.002 ounces,0.064 grams
●Mounting position: Any
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave ,60Hz, resistive or inductive load.
For capacitive load, derate current by 20%
CHARACTERISTICS SYMBOL ES1A ES1B ES1D ES1G ES1J UNIT
Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 V
Maximum RMS Voltage VRMS 35 70 140 280 420 V
Maximum DC Blocking Voltage VDC 50 100 200 400 600 V
Maximum Average Forward
Rectified Current @TA=55 ℃
Peak Forward Surage Current
8.3ms Single Half Sine-Wave
Super Imposed on Rated Load(JEDEC Method)
Peak Forward Voltage at 1.0A DC VF1.25 1.70 V
Maximum DC Reverse Current @TJ=25℃
at Rated DC Blocking Voltage @TJ=100℃
Maximum Reverse Recovery Time(Note 1) TRR nS
Tyical Junction Capacitance (Note2) CJpF
Tyical Thermal Resistance (Note3) RθJA ℃/W
Operating Temperature Range TJ℃
Storage Temperature Range TSTG ℃
0.95
2530
100
ES1A thru ES1J
A
SURFACE MOUNT GLASS SUPERFAST
RECOVERY RECTIFERS REVERSE VOLTAGE - 50 to 600 Volts
FORWARD CURRENT - 1.0 Amperes
30IFSM A
Dimensions in inches and (millimeters)
I(AV) 1.0
2.Measured at 1.0 MHz and applied reverse voltage of 4.0V DC
3.Thermal resistance junction of ambient.
NOTES: 1.Measured with IF=0.5A, IR=1A, IRR=0.25A
~ 137 ~
-55 to +150
-55 to +150
μAIR5.0
40
35
SMA
.055(1.40)
.062(1.60) .114(2.90)
.098(2.50)
.181(4.60)
.157(4.00)
.012(.305)
.006(.152)
.002(.051)
.008(.203)
.208(5.28)
.188(4.80)
.079(2.00)
.103(2.62)
.060(1.52)
.030(0.76)
RATING AND CHARACTERTIC CURVES
ES1A thru ES1J
~ 138 ~
FIG. 2 – MAXIMUM NON-REPETITIVE SURGE CURRENT
NUMBER OF CYCLES AT 60Hz
PEAK FORWARD SURGE CURRENT
AMPERES
PULSE WIDTH 8.3ms
SINGLE HALF-SINE-WAVE
(JEDEC METHOD)
1
20
10
0
30
40
2 5 10 20 50 100
FIG. 1 – FORWARD CURRENT DERATING CURVE
AMBIENT TEMPERATURE (℃)
AVERAGE FORWARD CURRENT
AMPERES
0.4
0.2
025
0.6
0.8
1.0
50 75 100 125 150 175
SINGLE PHASE HALF WAVE 60Hz
RESISTIVE OR INDUCTIVE LOAD
FIG.3 – TYPICAL JUNCTION CAPACITANCE
CAPACITANCE (pF)
REVERSE VOLTAGE ,VOLTS
1
100
10
14 10 100
TJ = 25°C f = 1 MHz
ES1G-ES1J
ES1A - ES1D
FIG.4-TYPICAL FORWARD CHARACTERISTICS
INSTANTANEOUS FORWARD CURRENT,
(A)
INSTANTANEOUS FORWARD VOLTAGE ,VOLTS
0
1.0
10
0.1
100
0.4 0.6
0.8
1.0 1.2 1.4 1.6 1.80.2
TJ = 25°C
PULSE WIDTH 300us
ES1G
ES1J
ES1A -ES1D
