CDC351. CDC351I 1-LINE TO 10-LINE CLOCK DRIVER WITH 3-STATE OUTPUTS www.ti.com SCAS441D - FEBRUARY 1994 - REVISED OCTOBER 2003 FEATURES * DB OR DW PACKAGE (TOP VIEW) Low Output Skew, Low Pulse Skew for Clock-Distribution and Clock-Generation Applications Operates at 3.3-V VCC LVTTL-Compatible Inputs and Outputs Supports Mixed-Mode Signal Operation (5-V Input and Output Voltages With 3.3-V VCC) Distributes One Clock Input to Ten Outputs Distributed VCC and Ground Pins Reduce Switching Noise High-Drive Outputs (-32-mA IOH, 32-mA IOL) State-of-the-Art EPIC-IIBTM BiCMOS Design Significantly Reduces Power Dissipation Package Options Include Plastic Small-Outline (DW) and Shrink Small-Outline (DB) Packages * * * * * * * * GND Y10 VCC Y9 OE A P0 P1 Y8 VCC Y7 GND 1 24 2 3 23 22 4 5 21 20 6 7 19 18 8 9 17 16 10 15 11 12 14 13 GND Y1 VCC Y2 GND Y3 Y4 GND Y5 VCC Y6 GND DESCRIPTION The CDC351 is a high-performance clock-driver circuit that distributes one input (A) to ten outputs (Y) with minimum skew for clock distribution. The output-enable (OE) input disables the outputs to a high-impedance state. The CDC351 operates at nominal 3.3-V VCC. The propagation delays are adjusted at the factory using the P0 and P1 pins. The factory adjustments ensure that the part-to-part skew is minimized and is kept within a specified window. Pins P0 and P1 are not intended for customer use and should be connected to GND. FUNCTION TABLE INPUTS A OE OUTPUTS Yn L H Z H H Z L L L H L H AVAILABLE OPTIONS (1) TA Shrink Small-Outline Package (DB) (1) Small-Outline Package (DW) (1) 0C to 70C CDC351DB CDC351DW - 40C to 85C CDC351IDB CDC351IDW This package is available tape and reel. Order by adding an R to the orderable part number (e.g., CDC351DBR). EPIC-IIB is a trademark of Texas Instruments. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 1994 - 2003, Texas Instruments Incorporated CDC351. CDC351I 1-LINE TO 10-LINE CLOCK DRIVER WITH 3-STATE OUTPUTS www.ti.com SCAS441D - FEBRUARY 1994 - REVISED OCTOBER 2003 LOGIC SYMBOL 5 A EN OE 23 21 19 18 16 6 A 14 11 9 4 2 Y1 Y2 Y3 Y4 Y5 Y6 Y7 Y8 Y9 Y10 Note A: This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. LOGIC DIAGRAM (POSITIVE LOGIC) OE 5 23 21 19 18 A Y2 Y3 Y4 6 16 7 8 P0 P1 14 11 9 4 2 2 Y1 Y5 Y6 Y7 Y8 Y9 Y10 CDC351. CDC351I 1-LINE TO 10-LINE CLOCK DRIVER WITH 3-STATE OUTPUTS www.ti.com SCAS441D - FEBRUARY 1994 - REVISED OCTOBER 2003 ABSOLUTE MAXIMUM RATINGS over operating free-air temperature range (unless otherwise noted) (1) Supply voltage range, VCC - 0.5 V to 4.6 V Input voltage range, VI (2) - 0.5 V to 7 V VO (2) Voltage range applied to any output in the high state or power-off state, - 0.5 V to 3.6 V Current into any output in the low state, IO 64 mA Input clamp current, IIK(VI < 0) - 18 mA Output clamp current, IOK (VI < 0) Package thermal impedance JA (3): - 50 mA DB package 147C/ W DW package 101C/ W Storage temperature range, Tstg (1) (2) (3) - 65C to 150C Stresses beyond those listed under,, absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under,, recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed. The package thermal impedance is calculated in accordance with JESD51. RECOMMENDED OPERATING CONDITIONS (1) MIN MAX 3.6 VCC Supply voltage 3 VIH High-level input voltage 2 VIL Low-level input voltage VI Input voltage IOH High-level output current IOL Low-level output current fclock Input clock frequency TA Operating free-air temperature (1) V 5.5 V - 32 mA 32 mA 100 MHz 0 70 C - 40 85 C TYP MAX UNIT -1.2 V Commercial Industrial V V 0.8 0 UNIT Unused pins (input or I/O) must be held high or low. ELECTRICAL CHARACTERISTICS over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS VIK VCC = 3 V, II = -18 mA MIN VOH VCC = 3 V, IOH = -32 mA VOL VCC = 3 V, IOL = 32 mA 0.5 V II VCC = 3.6 V, VI = VCC or GND 1 A IO (1) VCC = 3.6 V, VO = 2.5 V -150 mA IOZ VCC = 3.6 V, VO = 3 V or 0 10 A 2 V -15 Outputs high 0.3 Outputs low 25 ICC VCC = 3.6 V, IO = 0, VI = VCC or GND Ci VI = VCC or GND, VCC = 3.3 V, f = 10 MHz 4 pF Co VO = VCC or GND, VCC = 3.3 V, f = 10 MHz 6 pF Outputs disabled (1) mA 0.3 Not more than one output should be tested at a time, and the duration of the test should not exceed one second. 3 CDC351. CDC351I 1-LINE TO 10-LINE CLOCK DRIVER WITH 3-STATE OUTPUTS www.ti.com SCAS441D - FEBRUARY 1994 - REVISED OCTOBER 2003 SWITICHING CHARACTERISTICS CL = 50 pF (see Figure 1 and Figure 2) FROM (INPUT) TO (OUTPUT) A Y OE Y OE Y tsk(o) A tsk(p) A tsk(pr) A Y tr A tf A PARAMETER tPLH tPHL tPZH tPZL tPHZ tPLZ VCC = 3.3 V, TA = 25C VCC = 3 V to 3.6 V, TA = 0C to 70C MIN MAX VCC = 3 V to 3.6 V, TA = -40C to 85C MIN UNIT MIN TYP MAX MAX 3.2 3.7 4.2 3 3.5 4 1.8 3.8 5.5 1.3 5.9 1.1 6.1 1.8 3.8 5.5 1.3 5.9 1.1 6.1 1.8 3.9 5.9 1.7 6.3 1.5 6.5 1.8 4.2 5.9 1.7 6.4 1.5 6.6 Y 0.3 0.5 0.5 0.6 Y 0.2 0.8 0.8 0.9 ns 1 1 1.1 ns Y 1.5 1.5 ns Y 1.5 1.5 ns ns ns ns ns SWITCHING CHARACTERISTICS TEMPERATURE AND VCC COEFFICIENTS over recommended operating free-air temperature and VCC range (1) PARAMETER FROM (INPUT) TO (OUTPUT) MIN MAX UNIT tPLH(T) Average temperature coefficient of low to high propagation delay A Y 65 (2) ps/10C tPHL(T) Average temperature coefficient of high to low propagation delay A Y 45 (2) ps/10C tPLH(VCC) Average VCC coefficient of low to high propagation delay A Y tPHL(VCC) Average VCC coefficient of high to low propagation delay A Y -140 (3) -120 (3) (1) (2) (3) 4 These data were extracted from characterization material and are not tested at the factory. tPLH(T) and tPHL(T) are virtually independent of VCC. tPLH(VCC) and tPHL(VCC) are virtually independent of temperature. ps/ 100 mV ps/ 100 mV CDC351. CDC351I 1-LINE TO 10-LINE CLOCK DRIVER WITH 3-STATE OUTPUTS www.ti.com SCAS441D - FEBRUARY 1994 - REVISED OCTOBER 2003 6V 500 From Output Under Test S1 TEST tPLH /tPHL tPLZ /tPZL tPHZ /tPZH Open GND CL = 50 pF (see Note A) S1 Open 6V GND 500 tw LOAD CIRCUIT 3V Input 3V Timing Input 1.5 V 1.5 V 0V 1.5 V 0V tsu VOLTAGE WAVEFORMS th 3V Data Input 1.5 V 1.5 V 0V VOLTAGE WAVEFORMS 1.5 V 0V tPHL 2V 0.8 V tr 1.5 V 0V tPLZ 1.5 V tPLH Output 1.5 V tPZL 3V Input 3V Output Control (low-level enabling) 1.5 V VOH 2V tf 0.8 V VOL 3V Output Waveform 1 S1 at 6 V (see Note B) Output Waveform 2 S1 at GND (see Note B) 1.5 V tPZH VOLTAGE WAVEFORMS VOL + 0.3 V VOL tPHZ VOH 1.5 V VOH - 0.3 V 0V VOLTAGE WAVEFORMS A. CL includes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control. C. All input pulses are supplied by generators having the following characteristics: PRR 10 MHz, ZO = 50 , tr 2.5 ns, tf 2.5 ns. D. The outputs are measured one at a time with one transition per measurement. Figure 1. Load Circuit and Voltage Waveforms 5 CDC351. CDC351I 1-LINE TO 10-LINE CLOCK DRIVER WITH 3-STATE OUTPUTS SCAS441D - FEBRUARY 1994 - REVISED OCTOBER 2003 www.ti.com A Y1 tPHL1 tPLH1 tPHL2 tPLH2 tPHL3 tPLH3 tPHL4 tPLH4 tPHL5 tPLH5 tPHL6 tPLH6 tPHL7 tPLH7 tPHL8 tPLH8 tPHL9 tPLH9 Y2 Y3 Y4 Y5 Y6 Y7 Y8 Y9 Y10 tPHL10 tPLH10 A. Output skew, tsk(o), is calculated as the greater of: -- The difference between the fastest and slowest of tPLHn (n = 1, 2, 3, 4, 5, 6, 7, 8, 9, 10) -- The difference between the fastest and slowest of tPHLn(n = 1, 2, 3, 4, 5, 6, 7, 8, 9, 10) B. Pulse skew, tsk(p), is calculated as the greater of | tPLHn - tPHLn | (n = 1, 2, 3, 4, 5, 6, 7, 8, 9, 10). C. Process skew, tsk(pr), is calculated as the greater of: -- The difference between the fastest and slowest of tPLHn (n = 1, 2, 3, 4, 5, 6, 7, 8, 9, 10) across multiple devices under identical operating conditions -- The difference between the fastest and slowest of tPHLn (n = 1, 2, 3, 4, 5, 6, 7, 8, 9, 10) across multiple devices under identical operating conditions Figure 2. Waveforms for Calculation of tsk(o), tsk(p), tsk(pr) 6 PACKAGE OPTION ADDENDUM www.ti.com 28-Aug-2010 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp (3) Samples (Requires Login) CDC351DB ACTIVE SSOP DB 24 60 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples CDC351DBG4 ACTIVE SSOP DB 24 60 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples CDC351DBLE OBSOLETE SSOP DB 24 Call TI Replaced by CDC351DBR CDC351DBR ACTIVE SSOP DB 24 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples CDC351DBRG4 ACTIVE SSOP DB 24 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples CDC351DW ACTIVE SOIC DW 24 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples CDC351DWG4 ACTIVE SOIC DW 24 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples CDC351DWR ACTIVE SOIC DW 24 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples CDC351DWRG4 ACTIVE SOIC DW 24 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples CDC351IDB ACTIVE SSOP DB 24 60 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples CDC351IDBG4 ACTIVE SSOP DB 24 60 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples CDC351IDBR ACTIVE SSOP DB 24 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples CDC351IDBRG4 ACTIVE SSOP DB 24 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples CDC351IDW ACTIVE SOIC DW 24 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples CDC351IDWG4 ACTIVE SOIC DW 24 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples TBD (1) Call TI The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. Addendum-Page 1 PACKAGE OPTION ADDENDUM www.ti.com 28-Aug-2010 OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant CDC351DBR SSOP DB 24 2000 330.0 16.4 8.2 8.8 2.5 12.0 16.0 Q1 CDC351IDBR SSOP DB 24 2000 330.0 16.4 8.2 8.8 2.5 12.0 16.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) CDC351DBR SSOP DB 24 2000 367.0 367.0 38.0 CDC351IDBR SSOP DB 24 2000 367.0 367.0 38.0 Pack Materials-Page 2 MECHANICAL DATA MSSO002E - JANUARY 1995 - REVISED DECEMBER 2001 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 28 PINS SHOWN 0,38 0,22 0,65 28 0,15 M 15 0,25 0,09 8,20 7,40 5,60 5,00 Gage Plane 1 14 0,25 A 0-8 0,95 0,55 Seating Plane 2,00 MAX 0,10 0,05 MIN PINS ** 14 16 20 24 28 30 38 A MAX 6,50 6,50 7,50 8,50 10,50 10,50 12,90 A MIN 5,90 5,90 6,90 7,90 9,90 9,90 12,30 DIM 4040065 /E 12/01 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0,15. Falls within JEDEC MO-150 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated