SEMICONDUCTOR TECHNICAL DATA
1REV 1
Motorola, Inc. 1996
11/96
!'!% &
"&% %
% !# % "&%$
The MC74LCX08 is a high performance, quad 2–input AND gate
operating from a 2.7 to 3.6V supply. High impedance TTL compatible
inputs significantly reduce current loading to input drivers while TTL
compatible outputs offer improved switching noise performance. A VI
specification of 5.5V allows MC74LCX08 inputs to be safely driven from
5V devices.
Current drive capability is 24mA at the outputs.
•Designed for 2.7 to 3.6V VCC Operation
•5V Tolerant Inputs — Interface Capability With 5V TTL Logic
•LVTTL Compatible
•LVCMOS Compatible
•24mA Balanced Output Sink and Source Capability
•Near Zero Static Supply Current (10µA) Substantially Reduces System
Power Requirements
•Latchup Performance Exceeds 500mA
•ESD Performance: Human Body Model >2000V; Machine Model >200V
Pinout: 14–Lead (Top View)
1314 12 11 10 9 8
21 34567
V
CC A2 B2 O2 A3 B3 O3
A0 B0 O0 A1 B1 O1 GND
3O0
1
A0
LOGIC DIAGRAM
2
B0
6O1
4
A1 5
B1
11 O2
13
A2 12
B2
8O3
10
A3 9
B3
DT SUFFIX
PLASTIC TSSOP
CASE 948G–01
14
1
SD SUFFIX
PLASTIC SSOP
CASE 940A–03
14
1
M SUFFIX
PLASTIC SOIC EIAJ
CASE 965–01
14
1
D SUFFIX
PLASTIC SOIC
CASE 751A–03
14
1
PIN NAMES
Function
Data Inputs
Outputs
Pins
An, Bn
On
LOW–VOLTAGE CMOS
QUAD 2–INPUT AND GATE
L
L
H
H
L
H
L
H
INPUTS OUTPUTS
An Bn
L
L
L
H
On
FUNCTION TABLE
MC74LCX08
MOTOROLA LCX DATA
BR1339 — REV 3
2
ABSOLUTE MAXIMUM RATINGS*
Symbol Parameter Value Condition Unit
VCC DC Supply Voltage –0.5 to +7.0 V
VIDC Input Voltage –0.5 ≤ VI ≤ +7.0 V
VODC Output Voltage –0.5 ≤ VO ≤ VCC + 0.5 Note 1. V
IIK DC Input Diode Current –50 VI < GND mA
IOK DC Output Diode Current –50 VO < GND mA
+50 VO > VCC mA
IODC Output Source/Sink Current ±50 mA
ICC DC Supply Current Per Supply Pin ±100 mA
IGND DC Ground Current Per Ground Pin ±100 mA
TSTG Storage Temperature Range –65 to +150 °C
* Absolute maximum continuous ratings are those values beyond which damage to the device may occur. Exposure to these conditions or
conditions beyond those indicated may adversely affect device reliability. Functional operation under absolute–maximum–rated conditions is
not implied.
1. Output in HIGH or LOW State. IO absolute maximum rating must be observed.
RECOMMENDED OPERATING CONDITIONS
Symbol Parameter Min Typ Max Unit
VCC Supply Voltage Operating
Data Retention Only 2.0
1.5 3.3
3.3 3.6
3.6 V
VIInput Voltage 0 5.5 V
VOOutput Voltage (HIGH or LOW State) 0 VCC V
IOH HIGH Level Output Current, VCC = 3.0V – 3.6V –24 mA
IOL LOW Level Output Current, VCC = 3.0V – 3.6V 24 mA
IOH HIGH Level Output Current, VCC = 2.7V – 3.0V –12 mA
IOL LOW Level Output Current, VCC = 2.7V – 3.0V 12 mA
TAOperating Free–Air Temperature –40 +85 °C
∆t/∆VInput Transition Rise or Fall Rate, VIN from 0.8V to 2.0V,
VCC = 3.0V 0 10 ns/V
DC ELECTRICAL CHARACTERISTICS
TA = –40°C to +85°C
Symbol Characteristic Condition Min Max Unit
VIH HIGH Level Input Voltage (Note 2.) 2.7V ≤ VCC ≤ 3.6V 2.0 V
VIL LOW Level Input Voltage (Note 2.) 2.7V ≤ VCC ≤ 3.6V 0.8 V
VOH HIGH Level Output Voltage 2.7V ≤ VCC ≤ 3.6V ; IOH = –100µA VCC – 0.2 V
VCC = 2.7V ; IOH = –12mA 2.2
VCC = 3.0V ; IOH = –18mA 2.4
VCC = 3.0V ; IOH = –24mA 2.2
VOL LOW Level Output Voltage 2.7V ≤ VCC ≤ 3.6V; IOL = 100µA 0.2 V
VCC = 2.7V ; IOL= 12mA 0.4
VCC = 3.0V ; IOL = 16mA 0.4
VCC = 3.0V ; IOL = 24mA 0.55
2. These values of VI are used to test DC electrical characteristics only.
MC74LCX08
LCX DATA
BR1339 — REV 3 3 MOTOROLA
DC ELECTRICAL CHARACTERISTICS (continued)
TA = –40°C to +85°C
Symbol Characteristic Condition Min Max Unit
IIInput Leakage Current 2.7V ≤ VCC ≤ 3.6V ; 0V ≤ VI ≤ 5.5V ±5.0 µA
ICC Quiescent Supply Current 2.7 ≤ VCC ≤ 3.6V ; VI = GND or VCC 10 µA
2.7 ≤ VCC ≤ 3.6V; 3.6 ≤ VI ≤ 5.5V ±10 µA
∆ICC Increase in ICC per Input 2.7 ≤ VCC ≤ 3.6V ; VIH = VCC – 0.6V 500 µA
AC CHARACTERISTICS (tR = tF = 2.5ns; CL = 50pF; RL = 500Ω)
Limits
TA = –40°C to +85°C
VCC = 3.0V to 3.6V VCC = 2.7V
Symbol Parameter Waveform Min Max Max Unit
tPLH
tPHL Propagation Delay
Input to Output 1 1.5
1.5 5.5
5.5 6.2
6.2 ns
tOSHL
tOSLH Output–to–Output Skew
(Note 3.) 1.0
1.0 ns
3. Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device.
The specification applies to any outputs switching in the same direction, either HIGH–to–LOW (tOSHL) or LOW–to–HIGH (tOSLH); parameter
guaranteed by design.
DYNAMIC SWITCHING CHARACTERISTICS
TA = +25°C
Symbol Characteristic Condition Min Typ Max Unit
VOLP Dynamic LOW Peak Voltage (Note 4.) VCC = 3.3V, CL = 50pF, VIH = 3.3V, VIL = 0V 0.8 V
VOLV Dynamic LOW Valley Voltage (Note 4.) VCC = 3.3V, CL = 50pF, VIH = 3.3V, VIL = 0V 0.8 V
4. Number of outputs defined as “n”. Measured with “n–1” outputs switching from HIGH–to–LOW or LOW–to–HIGH. The remaining output is
measured in the LOW state.
CAPACITIVE CHARACTERISTICS
Symbol Parameter Condition Typical Unit
CIN Input Capacitance VCC = 3.3V, VI = 0V or VCC 7pF
COUT Output Capacitance VCC = 3.3V, VI = 0V or VCC 8pF
CPD Power Dissipation Capacitance 10MHz, VCC = 3.3V, VI = 0V or VCC 25 pF
MC74LCX08
MOTOROLA LCX DATA
BR1339 — REV 3
4
PROPAGATION DELAYS
tR = tF = 2.5ns, 10% to 90%; f = 1MHz; tW = 500ns
2.7V
0V
VOH
VOL
An, Bn
On
tPLH
tPHL
1.5V1.5V
1.5V 1.5V
Figure 1. AC Waveforms
PULSE
GENERATOR
RT
DUT
VCC
RL
CL
CL = 50pF or equivalent (Includes jig and probe capacitance)
RL = R1 = 500Ω or equivalent
RT = ZOUT of pulse generator (typically 50Ω)
Figure 2. Test Circuit
MC74LCX08
LCX DATA
BR1339 — REV 3 5 MOTOROLA
OUTLINE DIMENSIONS
D SUFFIX
PLASTIC SOIC PACKAGE
CASE 751A–03
ISSUE F
MIN MINMAX MAX
MILLIMETERS INCHES
DIM
A
B
C
D
F
G
J
K
M
P
R
8.55
3.80
1.35
0.35
0.40
0.19
0.10
0
°
5.80
0.25
8.75
4.00
1.75
0.49
1.25
0.25
0.25
7
°
6.20
0.50
0.337
0.150
0.054
0.014
0.016
0.008
0.004
0
°
0.228
0.010
0.344
0.157
0.068
0.019
0.049
0.009
0.009
7
°
0.244
0.019
1.27 BSC 0.050 BSC
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSIONS A AND B DO NOT INCLUDE
MOLD PROTRUSION.
4. MAXIMUM MOLD PROTRUSION 0.15 (0.006)
PER SIDE.
5. DIMENSION D DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.127 (0.005) TOTAL
IN EXCESS OF THE D DIMENSION AT
MAXIMUM MATERIAL CONDITION.
–A
–
–B
–P 7 PL
GC
K
SEATING
PLANE
D 14 PL MJ
R X 45°
17
814
0.25 (0.010) T B A
MS S
B0.25 (0.010) M M
F
M SUFFIX
PLASTIC SOIC EIAJ PACKAGE
CASE 965–01
ISSUE O
ZD
HE
E
1
14 8
7
bA1
A
e
L
DIM MIN MAX MIN MAX
INCHES
--- 2.05 --- 0.081
MILLIMETERS
0.05 0.20 0.002 0.008
0.35 0.50 0.014 0.020
0.18 0.27 0.007 0.011
9.90 10.50 0.390 0.413
5.10 5.45 0.201 0.215
1.27 BSC 0.050 BSC
7.40 8.20 0.291 0.323
0.50 0.85 0.020 0.033
1.10 1.50 0.043 0.059
0
0.70 0.90 0.028 0.035
--- 1.42 --- 0.056
A1
A
b
c
D
E
e
L
M
Z
HE
Q1
LE
_
10
_
0
_
10
_
LEQ1
c
M
_
VIEW P
DETAIL P
NOTES:
1 DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2 CONTROLLING DIMENSION: MILLIMETER.
3 DIMENSIONS D AND E DO NOT INCLUDE MOLD
FLASH OR PROTRUSIONS AND ARE MEASURED
AT THE PARTING LINE. MOLD FLASH OR
PROTRUSIONS SHALL NOT EXCEED 0.15 (0.006)
PER SIDE.
4 TERMINAL NUMBERS ARE SHOWN FOR
REFERENCE ONLY.
5 THE LEAD WIDTH DIMENSION (b) DOES NOT
INCLUDE DAMBAR PROTRUSION. ALLOWABLE
DAMBAR PROTRUSION SHALL BE 0.08 (0.003)
TOTAL IN EXCESS OF THE LEAD WIDTH
DIMENSION AT MAXIMUM MATERIAL CONDITION.
DAMBAR CANNOT BE LOCATED ON THE LOWER
RADIUS OR THE FOOT. MINIMUM SPACE
BETWEEN PROTRUSIONS AND ADJACENT LEAD
TO BE 0.46 ( 0.018).
0.13 (0.005) M0.10 (0.004)
MC74LCX08
MOTOROLA LCX DATA
BR1339 — REV 3
6
OUTLINE DIMENSIONS
DIM
AMIN MAX MIN MAX
INCHES
6.07 6.33 0.238 0.249
MILLIMETERS
B5.20 5.38 0.205 0.212
C1.73 1.99 0.068 0.078
D0.05 0.21 0.002 0.008
F0.63 0.95 0.024 0.037
G0.65 BSC 0.026 BSC
H1.08 1.22 0.042 0.048
J0.09 0.20 0.003 0.008
J1 0.09 0.16 0.003 0.006
K0.25 0.38 0.010 0.015
K1 0.25 0.33 0.010 0.013
____
NOTES:
6 DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
7 CONTROLLING DIMENSION: MILLIMETER.
8 DIMENSION A DOES NOT INCLUDE MOLD FLASH,
PROTRUSIONS OR GATE BURRS. MOLD FLASH
OR GATE BURRS SHALL NOT EXCEED 0.15
(0.006) PER SIDE.
9 DIMENSION B DOES NOT INCLUDE INTERLEAD
FLASH OR PROTRUSION. INTERLEAD FLASH OR
PROTRUSION SHALL NOT EXCEED 0.15 (0.006)
PER SIDE.
10 DIMENSION K DOES NOT INCLUDE DAMBAR
PROTRUSION/INTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.13 (0.005) TOTAL IN
EXCESS OF K DIMENSION AT MAXIMUM
MATERIAL CONDITION. DAMBAR INTRUSION
SHALL NOT REDUCE DIMENSION K BY MORE
THAN 0.07 (0.002) AT LEAST MATERIAL
CONDITION.
11 TERMINAL NUMBERS ARE SHOWN FOR
REFERENCE ONLY.
12 DIMENSION A AND B ARE TO BE DETERMINED
AT DATUM PLANE –W–.
H
A
B
14 8
71
F
M
K14X REF
S
U
M
0.12 (0.005) V S
T
L
L/2
PIN 1
IDENT
S
U
M
0.20 (0.008) T
–V– –U–
D
C
0.076 (0.003)
G
–T–
SEATING
PLANE
DETAIL E
DETAIL E
–W–
N
N
0.25 (0.010)
ÇÇÇÇ
ÇÇÇÇ
ÉÉÉÉ
ÉÉÉÉ
K
JJ1
K1
SECTION N–N
L7.65 7.90 0.301 0.311
M0 8 0 8
DT SUFFIX
PLASTIC TSSOP PACKAGE
CASE 948G–01
ISSUE O
DIM MIN MAX MIN MAX
INCHESMILLIMETERS
A4.90 5.10 0.193 0.200
B4.30 4.50 0.169 0.177
C––– 1.20 ––– 0.047
D0.05 0.15 0.002 0.006
F0.50 0.75 0.020 0.030
G0.65 BSC 0.026 BSC
H0.50 0.60 0.020 0.024
J0.09 0.20 0.004 0.008
J1 0.09 0.16 0.004 0.006
K0.19 0.30 0.007 0.012
K1 0.19 0.25 0.007 0.010
L6.40 BSC 0.252 BSC
M0 8 0 8
NOTES:
1 DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2 CONTROLLING DIMENSION: MILLIMETER.
3 DIMENSION A DOES NOT INCLUDE MOLD FLASH,
PROTRUSIONS OR GATE BURRS. MOLD FLASH
OR GATE BURRS SHALL NOT EXCEED 0.15
(0.006) PER SIDE.
4 DIMENSION B DOES NOT INCLUDE INTERLEAD
FLASH OR PROTRUSION. INTERLEAD FLASH OR
PROTRUSION SHALL NOT EXCEED
0.25 (0.010) PER SIDE.
5 DIMENSION K DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.08 (0.003) TOTAL IN
EXCESS OF THE K DIMENSION AT MAXIMUM
MATERIAL CONDITION.
6 TERMINAL NUMBERS ARE SHOWN FOR
REFERENCE ONLY.
7 DIMENSION A AND B ARE TO BE DETERMINED
AT DATUM PLANE –W–.
____
S
U0.15 (0.006) T
2X L/2
S
U
M
0.10 (0.004) V S
T
L–U–
SEATING
PLANE
0.10 (0.004)
–T–
ÇÇÇ
ÇÇÇ
SECTION N–N
DETAIL E
JJ1
K
K1
ÉÉÉ
ÉÉÉ
DETAIL E
F
M
–W–
0.25 (0.010)
8
14
7
1
PIN 1
IDENT.
H
G
A
D
C
B
S
U0.15 (0.006) T
–V–
14X REFK
N
N
SD SUFFIX
PLASTIC SSOP PACKAGE
CASE 940A–03
ISSUE B
MC74LCX08
LCX DATA
BR1339 — REV 3 7 MOTOROLA
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola
data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”
must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of
others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other
applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury
or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal
Opportunity/Af firmative Action Employer.
How to reach us:
USA/EUROPE/Locations Not Listed: Motorola Literature Distribution; JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center ,
P.O. Box 5405; Denver, Colorado 80217. 1–800–441–2447 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 81–3–3521–8315
MFAX: RMF AX0@email.sps.mot.com – TOUCHT ONE 602–244–6609 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,
INTERNET: http://Design–NET.com 51 Tin g K o k Road, Tai Po, N.T., Hong Kong. 852–26629298
MC74LCX08/D
◊
