SEMICONDUCTOR TECHNICAL DATA !'!% & "&% % % !# % "&%$ The MC74LCX08 is a high performance, quad 2-input AND gate operating from a 2.7 to 3.6V supply. High impedance TTL compatible inputs significantly reduce current loading to input drivers while TTL compatible outputs offer improved switching noise performance. A VI specification of 5.5V allows MC74LCX08 inputs to be safely driven from 5V devices. Current drive capability is 24mA at the outputs. * * * * * * LOW-VOLTAGE CMOS QUAD 2-INPUT AND GATE Designed for 2.7 to 3.6V VCC Operation 5V Tolerant Inputs -- Interface Capability With 5V TTL Logic LVTTL Compatible LVCMOS Compatible 1 Near Zero Static Supply Current (10A) Substantially Reduces System Power Requirements * Latchup Performance Exceeds 500mA * ESD Performance: Human Body Model >2000V; Machine Model >200V D SUFFIX PLASTIC SOIC CASE 751A-03 14 24mA Balanced Output Sink and Source Capability M SUFFIX PLASTIC SOIC EIAJ CASE 965-01 14 1 Pinout: 14-Lead (Top View) VCC 14 A2 B2 O2 A3 B3 O3 13 12 11 10 9 8 1 SD SUFFIX PLASTIC SSOP CASE 940A-03 1 DT SUFFIX PLASTIC TSSOP CASE 948G-01 14 14 1 2 3 4 5 6 7 A0 B0 O0 A1 B1 O1 GND PIN NAMES LOGIC DIAGRAM A0 B0 A1 B1 A2 B2 A3 B3 1 3 2 O0 4 6 5 Pins Function An, Bn On Data Inputs Outputs O1 FUNCTION TABLE 13 11 12 10 8 9 INPUTS O2 O3 An Bn On L L H H L H L H L L L H 11/96 Motorola, Inc. 1996 1 OUTPUTS REV 1 MC74LCX08 ABSOLUTE MAXIMUM RATINGS* Symbol Parameter Value Condition Unit VCC DC Supply Voltage -0.5 to +7.0 V VI DC Input Voltage -0.5 VI +7.0 V VO DC Output Voltage -0.5 VO VCC + 0.5 Note 1. V IIK DC Input Diode Current -50 VI < GND mA IOK DC Output Diode Current -50 VO < GND mA +50 VO > VCC mA IO DC Output Source/Sink Current 50 mA ICC DC Supply Current Per Supply Pin 100 mA IGND DC Ground Current Per Ground Pin 100 mA TSTG Storage Temperature Range -65 to +150 C * Absolute maximum continuous ratings are those values beyond which damage to the device may occur. Exposure to these conditions or conditions beyond those indicated may adversely affect device reliability. Functional operation under absolute-maximum-rated conditions is not implied. 1. Output in HIGH or LOW State. IO absolute maximum rating must be observed. RECOMMENDED OPERATING CONDITIONS Symbol Parameter Operating Data Retention Only Min Typ Max Unit 2.0 1.5 3.3 3.3 3.6 3.6 V 0 5.5 V 0 VCC V VCC Supply Voltage VI Input Voltage VO Output Voltage IOH HIGH Level Output Current, VCC = 3.0V - 3.6V -24 mA IOL LOW Level Output Current, VCC = 3.0V - 3.6V 24 mA IOH HIGH Level Output Current, VCC = 2.7V - 3.0V -12 mA IOL LOW Level Output Current, VCC = 2.7V - 3.0V TA Operating Free-Air Temperature t/V Input Transition Rise or Fall Rate, VIN from 0.8V to 2.0V, VCC = 3.0V (HIGH or LOW State) 12 mA -40 +85 C 0 10 ns/V DC ELECTRICAL CHARACTERISTICS TA = -40C to +85C Symbol Characteristic Condition Min 2.0 VIH HIGH Level Input Voltage (Note 2.) 2.7V VCC 3.6V VIL LOW Level Input Voltage (Note 2.) 2.7V VCC 3.6V VOH HIGH Level Output Voltage VOL LOW Level Output Voltage Max V 0.8 2.7V VCC 3.6V; IOH = -100A VCC - 0.2 VCC = 2.7V; IOH = -12mA 2.2 VCC = 3.0V; IOH = -18mA 2.4 VCC = 3.0V; IOH = -24mA 2.2 Unit V V 2.7V VCC 3.6V; IOL = 100A 0.2 VCC = 2.7V; IOL= 12mA 0.4 VCC = 3.0V; IOL = 16mA 0.4 VCC = 3.0V; IOL = 24mA 0.55 V 2. These values of VI are used to test DC electrical characteristics only. MOTOROLA 2 LCX DATA BR1339 -- REV 3 MC74LCX08 DC ELECTRICAL CHARACTERISTICS (continued) TA = -40C to +85C Symbol Characteristic II Input Leakage Current ICC Quiescent Supply Current ICC Increase in ICC per Input Condition Min Max Unit 2.7V VCC 3.6V; 0V VI 5.5V 5.0 A 2.7 VCC 3.6V; VI = GND or VCC 10 A 2.7 VCC 3.6V; 3.6 VI 5.5V 10 A 2.7 VCC 3.6V; VIH = VCC - 0.6V 500 A AC CHARACTERISTICS (tR = tF = 2.5ns; CL = 50pF; RL = 500) Limits TA = -40C to +85C VCC = 3.0V to 3.6V Symbol tPLH tPHL Parameter VCC = 2.7V Waveform Min Max Max Unit 1 1.5 1.5 5.5 5.5 6.2 6.2 ns Propagation Delay Input to Output tOSHL Output-to-Output Skew 1.0 ns tOSLH (Note 3.) 1.0 3. Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The specification applies to any outputs switching in the same direction, either HIGH-to-LOW (tOSHL) or LOW-to-HIGH (tOSLH); parameter guaranteed by design. DYNAMIC SWITCHING CHARACTERISTICS TA = +25C Symbol Characteristic Condition VOLP Dynamic LOW Peak Voltage (Note 4.) VCC = 3.3V, CL = 50pF, VIH = 3.3V, VIL = 0V Min Typ 0.8 Max Unit V VOLV Dynamic LOW Valley Voltage (Note 4.) VCC = 3.3V, CL = 50pF, VIH = 3.3V, VIL = 0V 0.8 V 4. Number of outputs defined as "n". Measured with "n-1" outputs switching from HIGH-to-LOW or LOW-to-HIGH. The remaining output is measured in the LOW state. CAPACITIVE CHARACTERISTICS Symbol Parameter Condition Typical Unit CIN Input Capacitance VCC = 3.3V, VI = 0V or VCC 7 pF COUT Output Capacitance VCC = 3.3V, VI = 0V or VCC 8 pF CPD Power Dissipation Capacitance 10MHz, VCC = 3.3V, VI = 0V or VCC 25 pF LCX DATA BR1339 -- REV 3 3 MOTOROLA MC74LCX08 2.7V 1.5V An, Bn 1.5V 0V tPHL tPLH VOH 1.5V On 1.5V VOL PROPAGATION DELAYS tR = tF = 2.5ns, 10% to 90%; f = 1MHz; tW = 500ns Figure 1. AC Waveforms VCC PULSE GENERATOR DUT RT CL RL CL = 50pF or equivalent (Includes jig and probe capacitance) RL = R1 = 500 or equivalent RT = ZOUT of pulse generator (typically 50) Figure 2. Test Circuit MOTOROLA 4 LCX DATA BR1339 -- REV 3 MC74LCX08 OUTLINE DIMENSIONS D SUFFIX PLASTIC SOIC PACKAGE CASE 751A-03 ISSUE F NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSIONS A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER SIDE. 5. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 (0.005) TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. -A - 14 8 -B - 1 P7 PL 0.25 (0.010) 7 G D 0.25 (0.010) M T F B A S DIM A B C D F G J K M P R J M K 14 PL M R X 45 C SEATING PLANE B M S MILLIMETERS MIN MAX 8.75 8.55 4.00 3.80 1.75 1.35 0.49 0.35 1.25 0.40 1.27 BSC 0.25 0.19 0.25 0.10 7 0 5.80 6.20 0.25 0.50 INCHES MIN MAX 0.337 0.344 0.150 0.157 0.054 0.068 0.014 0.019 0.016 0.049 0.050 BSC 0.008 0.009 0.004 0.009 7 0 0.228 0.244 0.010 0.019 M SUFFIX PLASTIC SOIC EIAJ PACKAGE CASE 965-01 ISSUE O 14 NOTES: 1 DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2 CONTROLLING DIMENSION: MILLIMETER. 3 DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS AND ARE MEASURED AT THE PARTING LINE. MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED 0.15 (0.006) PER SIDE. 4 TERMINAL NUMBERS ARE SHOWN FOR REFERENCE ONLY. 5 THE LEAD WIDTH DIMENSION (b) DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.08 (0.003) TOTAL IN EXCESS OF THE LEAD WIDTH DIMENSION AT MAXIMUM MATERIAL CONDITION. DAMBAR CANNOT BE LOCATED ON THE LOWER RADIUS OR THE FOOT. MINIMUM SPACE BETWEEN PROTRUSIONS AND ADJACENT LEAD TO BE 0.46 ( 0.018). LE 8 Q1 E HE M_ L 7 1 DETAIL P Z D e VIEW P A c b 0.13 (0.005) LCX DATA BR1339 -- REV 3 A1 M 0.10 (0.004) 5 DIM A A1 b c D E e HE L LE M Q1 Z MILLIMETERS MIN MAX --2.05 0.05 0.20 0.35 0.50 0.18 0.27 9.90 10.50 5.10 5.45 1.27 BSC 7.40 8.20 0.50 0.85 1.10 1.50 10 _ 0_ 0.70 0.90 --1.42 INCHES MIN MAX --0.081 0.002 0.008 0.014 0.020 0.007 0.011 0.390 0.413 0.201 0.215 0.050 BSC 0.291 0.323 0.020 0.033 0.043 0.059 10 _ 0_ 0.028 0.035 --0.056 MOTOROLA MC74LCX08 OUTLINE DIMENSIONS SD SUFFIX PLASTIC SSOP PACKAGE CASE 940A-03 ISSUE B 14X K REF 0.12 (0.005) T U M S V S NOTES: 6 DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 7 CONTROLLING DIMENSION: MILLIMETER. 8 DIMENSION A DOES NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS. MOLD FLASH OR GATE BURRS SHALL NOT EXCEED 0.15 (0.006) PER SIDE. 9 DIMENSION B DOES NOT INCLUDE INTERLEAD FLASH OR PROTRUSION. INTERLEAD FLASH OR PROTRUSION SHALL NOT EXCEED 0.15 (0.006) PER SIDE. 10 DIMENSION K DOES NOT INCLUDE DAMBAR PROTRUSION/INTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.13 (0.005) TOTAL IN EXCESS OF K DIMENSION AT MAXIMUM MATERIAL CONDITION. DAMBAR INTRUSION SHALL NOT REDUCE DIMENSION K BY MORE THAN 0.07 (0.002) AT LEAST MATERIAL CONDITION. 11 TERMINAL NUMBERS ARE SHOWN FOR REFERENCE ONLY. 12 DIMENSION A AND B ARE TO BE DETERMINED AT DATUM PLANE -W-. 0.25 (0.010) N 14 L/2 8 M N B L F PIN 1 IDENT 1 7 DETAIL E -U- A -V- 0.20 (0.008) M T U EEEE CCCC CCCC EEEE K J S J1 K1 SECTION N-N 0.076 (0.003) -T- -W- C SEATING PLANE DIM A B C D F G H J J1 K K1 L M D G DETAIL E H MILLIMETERS MIN MAX 6.07 6.33 5.20 5.38 1.73 1.99 0.05 0.21 0.63 0.95 0.65 BSC 1.08 1.22 0.09 0.20 0.09 0.16 0.25 0.38 0.25 0.33 7.65 7.90 0_ 8_ INCHES MIN MAX 0.238 0.249 0.205 0.212 0.068 0.078 0.002 0.008 0.024 0.037 0.026 BSC 0.042 0.048 0.003 0.008 0.003 0.006 0.010 0.015 0.010 0.013 0.301 0.311 0_ 8_ DT SUFFIX PLASTIC TSSOP PACKAGE CASE 948G-01 ISSUE O 14X K REF 0.10 (0.004) 0.15 (0.006) T U M T U V S NOTES: 1 DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2 CONTROLLING DIMENSION: MILLIMETER. 3 DIMENSION A DOES NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS. MOLD FLASH OR GATE BURRS SHALL NOT EXCEED 0.15 (0.006) PER SIDE. 4 DIMENSION B DOES NOT INCLUDE INTERLEAD FLASH OR PROTRUSION. INTERLEAD FLASH OR PROTRUSION SHALL NOT EXCEED 0.25 (0.010) PER SIDE. 5 DIMENSION K DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.08 (0.003) TOTAL IN EXCESS OF THE K DIMENSION AT MAXIMUM MATERIAL CONDITION. 6 TERMINAL NUMBERS ARE SHOWN FOR REFERENCE ONLY. 7 DIMENSION A AND B ARE TO BE DETERMINED AT DATUM PLANE -W-. S S N 2X 14 L/2 0.25 (0.010) 8 M B -U- L PIN 1 IDENT. F 7 1 0.15 (0.006) T U N S DETAIL E K A -V- EEE CCC CCC EEE K1 J J1 SECTION N-N -W- C 0.10 (0.004) -T- SEATING PLANE MOTOROLA D G H DETAIL E 6 DIM A B C D F G H J J1 K K1 L M MILLIMETERS MIN MAX 4.90 5.10 4.30 4.50 --- 1.20 0.05 0.15 0.50 0.75 0.65 BSC 0.50 0.60 0.09 0.20 0.09 0.16 0.19 0.30 0.19 0.25 6.40 BSC 0_ 8_ INCHES MIN MAX 0.193 0.200 0.169 0.177 --- 0.047 0.002 0.006 0.020 0.030 0.026 BSC 0.020 0.024 0.004 0.008 0.004 0.006 0.007 0.012 0.007 0.010 0.252 BSC 0_ 8_ LCX DATA BR1339 -- REV 3 MC74LCX08 Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405; Denver, Colorado 80217. 1-800-441-2447 JAPAN: Nippon Motorola Ltd.; Tatsumi-SPD-JLDC, 6F Seibu-Butsuryu-Center, 3-14-2 Tatsumi Koto-Ku, Tokyo 135, Japan. 81-3-3521-8315 MFAX: RMFAX0@email.sps.mot.com - TOUCHTONE 602-244-6609 INTERNET: http://Design-NET.com ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 LCX DATA BR1339 -- REV 3 7 MC74LCX08/D MOTOROLA