MJE13004/13005 MJE13004/13005 High Voltage Switch Mode Application * High Speed Switching * Suitable for Switching Regulator and Motor Control TO-220 1 1.Base 2.Collector 3.Emitter NPN Silicon Transistor Absolute Maximum Ratings TC=25C unless otherwise noted Symbol VCBO VCEO Parameter Value Units V V Collector-Base Voltage : MJE13004 : MJE13005 600 700 : MJE13004 : MJE13005 300 400 Collector-Emitter Voltage V V VEBO Emitter-Base Voltage 9 V IC Collector Current (DC) 4 A ICP Collector Current (Pulse) 8 A IB Base Current 2 A PC Collector Dissipation (TC=25C) 75 W TJ Junction Temperature 150 C TSTG Storage Temperature - 65 ~ 150 C Electrical Characteristics TC=25C unless otherwise noted Symbol BVCEO(sus) Parameter Collector-Emitter Sustaining Voltage : MJE13004 : MJE13005 Test Condition IC = 10mA, IB = 0 Min. Typ. Max. 300 400 Units V V IEBO Emitter Cut-off Current VEB = 9V, IC = 0 hFE *DC Current Gain VCE = 5V, IC = 1A VCE = 5V, IC = 2A VCE(sat) *Collector-Emitter Saturation Voltage IC = 1A, IB = 0.2A IC = 2A, IB = 0.5A IC = 4A, IB = 1A 0.5 0.6 1 V V V VBE (sat) *Base-Emitter Saturation Voltage IC = 1A, IB = 0.2A IC = 2A, IB = 0.5A 1.2 1.6 V V Cob Output Capacitance VCB = 10V, f = 0.1MHz fT Current Gain Bandwidth Product VCE = 10V, IC = 0.5A VCC = 125V, IC = 2A IB1 = - IB2 = 0.4A RL = 62.5 tON Turn ON Time tSTG Storage Time tF Fall Time 1 10 8 mA 60 40 65 pF 4 MHz 0.8 s 4 s 0.9 s * Pulse test: PW300s, Duty cycle2% Pulse (c)2001 Fairchild Semiconductor Corporation Rev. A1, February 2001 MJE13004/13005 VBE(sat), VCE(sat)[V], SATURATION VOLTAGE Typical Characteristics 100 hFE, DC CURRENT GAIN VCE = 5V 10 1 0.01 0.1 1 10 10 IC = 4 IB V BE(sat) 1 0.1 VCE(sat) 0.01 0.01 IC[A], COLLECTOR CURRENT 0.1 1 10 IC[A], COLLECTOR CURRENT Figure 1. DC current Gain Figure 2. Base-Emitter Saturation Voltage Collector-Emitter Saturation Voltage 10 1000 tR, tD [ s], TURN ON TIME 100 10 1 0.1 1 10 100 1 tr 0.1 tD, VBE(off)=5V 0.01 0.01 1000 VCB[V], COLLECTOR-BASE VOLTAGE Figure 3. Collector Output Capacitance 10 10 VCC=125V IC=5IB 1 s 1m MJE13004 0.1 0.01 0.1 1 IC[A], COLLECTOR CURRENT Figure 5. Turn Off Time (c)2001 Fairchild Semiconductor Corporation 10 s tF 0 1 DC 50 IC[A], COLLECTOR CURRENT tSTG s 5m tSTG, tF [s], TURN OFF TIME 1 Figure 4. Turn On Time 10 0.1 0.01 0.1 IC[A], COLLECTOR CURRENT 1 10 100 MJE13005 Cob[pF], CAPACITANCE V CC=125V IC=5IB Ib1= - IB2 1000 VCE [V], COLLECTOR-EMITTER VOLTAGE Figure 6. Safe Operating Area Rev. A1, February 2001 MJE13004/13005 Typical Characteristics (Continued) 100 PC[W], POWER DISSIPATION 90 80 70 60 50 40 30 20 10 0 0 25 50 75 100 125 150 175 o Tc[ C], CASE TEMPERATURE Figure 7. Power Derating (c)2001 Fairchild Semiconductor Corporation Rev. A1, February 2001 MJE13004/13005 Package Demensions TO-220 4.50 0.20 2.80 0.10 (3.00) +0.10 1.30 -0.05 18.95MAX. (3.70) o3.60 0.10 15.90 0.20 1.30 0.10 (8.70) (1.46) 9.20 0.20 (1.70) 9.90 0.20 1.52 0.10 0.80 0.10 2.54TYP [2.54 0.20] 10.08 0.30 (1.00) 13.08 0.20 ) (45 1.27 0.10 +0.10 0.50 -0.05 2.40 0.20 2.54TYP [2.54 0.20] 10.00 0.20 Dimensions in Millimeters (c)2001 Fairchild Semiconductor Corporation Rev. A1, February 2001 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACExTM BottomlessTM CoolFETTM CROSSVOLTTM DOMETM E2CMOSTM EnSignaTM FACTTM FACT Quiet SeriesTM FAST(R) FASTrTM GlobalOptoisolatorTM GTOTM HiSeCTM ISOPLANARTM MICROWIRETM OPTOLOGICTM OPTOPLANARTM PACMANTM POPTM PowerTrench(R) QFETTM QSTM QT OptoelectronicsTM Quiet SeriesTM LILENT SWITCHER(R) SMART STARTTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TinyLogicTM VCXTM UHCTM DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR INTERNATIONAL. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. (c)2001 Fairchild Semiconductor Corporation Rev. G