OS-CON Line-up Surface mount type Guidelines and precautions Selection guide TPG Condition - 2.5 4.0 6.3 8.0 10 12.5 Surge voltage (V) - 2.9 4.6 7.2 9.2 12 14 Category temperature range () - Capacitance tolerance () 120Hz/20 M : 20 Rated capacitance range (F) 120Hz/20 33 to 220 120Hz/20 Please see the attached characteristics list Please see the attached characteristics list 100kHz/20 Please see the attached characteristics list Characteristics of impedance ratio at high temp. and low temp. 100kHz/20 haracteristics Reliability TPU TPH Anode(+) W Size code B1G B15G Surface mount type TPSF TPE TPB TPC TPF TA TV TH TQC Catalog Deletion and EOL models 83 1.5 times of the initial limit LC Within the initial limit C/C Within40%,-20% of the initial value DF < LC 1.5 times of the initial limit < C/C 3 times of the initial limit Within5% of the initial value DF Within the initial limit LC < 3 times of the initial limit 0.3 W -0.1 2.8 2.8 S 0.2 0.8 0.8 2.5 e R.V. Mark c a W1 0.1 2.2 2.2 Capacitance(F) Mark 10 A 12.5 B 33 N7 RV 33 47 100 150 220 b c Size code a 1.6 2.7 1.4 B1G 1.6 2.7 1.4 B15G 47 S7 100 A8 150 E8 220 J8 2.5 RV:Rated voltage 4.0 6.3 B1G B15G B1G,B15G B15G B15G 8.0 10.0 B1G B1G 12.5 B1G Maximum allowable MSL LC ESR Rated Category Category Rated Rated DF A mmax ripple current Reflow Reflow voltage temperature capacitance voltage temperature mArms temp. temp. max max/5min. 100kHz/20 100kHz1 < 260 < 250 () F V (V) 12TPG33M 12.5 10TPG47M 10 8TPG47M 8.0 6.3 B1G 6TPG100M 6TPG100MG 6.3 6TPG100MZGD2 6.3 2R5TPG220M 2.5 6TPG220MZG2 6.3 6TPG150M 6.3 6.3 B15G 6TPG150MZG 4TPG220M 4.0 2R5TPG220MUG 2.5 1 100k to 500kHz,45 8.0 k Size list F TPG series characteristics list Part number 6.3 j 3 The rated capacitance is as follows. (unit : mm) a 4.0 g 2 Lot.No.shows roughly manufacturing date. Lot. No.2 (unit : mm) H 0.1 1.1 1.4 1 The rated voltage is as follows. Recommended land pattern dimension of PWB Size code TPG 0.3 L -0.1 3.5 3.5 b Selection guide Technical data Fundamental structure < A8 j G Rated voltage1 W1 S S Guidelines and precautions Recommended soldering condition DF Rated capacitance3 H POSCAP Line-up Packing specifications Within20% of the initial value Marking and dimensions Catalog Deletion and EOL series Explanation of part numbers 0.6 to 2.0 C/C 60, 90 to 95%RH, 500h, No-applied voltage L Products list 105 Z/Z20 85, 1,000 cycles, 1k discharge resistance, surge voltage applied Surge 0.6 to 2.0 -55 Z/Z20 85, 1,000h rated voltage applied Endurance Damp heat (Steady State) Image of case size -55 to 105 Rated voltage applied, after 5 minutes Equivalent series resistance (ESR) Series system diagram Specifications (V) Leakage current Radial lead type RoHS compliance, Halogen free Small size, Low profile: L3.5xW2.8xH1.1mm (B1G) Large capacitance: 6.3V220FB15G) Rated voltage Dissipation Factor (DF) Surface mount type Series Specifications Items Technical data Update 85 85 85 85 85 85 85 85 85 85 85 85 2 Under development 33 47 47 100 100 100 220 220 150 150 220 220 10 8.0 6.4 5.0 5.0 5.0 2.0 5.0 5.0 5.0 3.2 2.0 105 105 105 105 105 105 105 105 105 105 105 105 10 10 10 10 10 10 10 10 10 10 10 10 41.3 47.0 37.6 63.0 63.0 126.0 55.0 277.2 94.5 189.0 88.0 110.0 70 70 70 70 55 35/300kHz 70 35/300kHz 70 35/300kHz 70 30/300kHz 1000 1000 1000 1000 1100 1200 1000 1200 1000 1200 1000 1400 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 Red letters New models