Philips Semiconductors Product specification
LM193/A/293/A/393/A/2903Low power dual voltage comparator
1
1995 Nov 27 853-0932 16050
DESCRIPTION
The LM193 series consists of two independent precision voltage
comparators with an offset voltage specification as low as 2.0mV
max. for two comparators which were designed specifically to
operate from a single power supply over a wide range of voltages.
Operation from split power supplies is also possible and the low
power supply current drain is independent of the magnitude of the
power supply voltage. These comparators also have a unique
characteristic in that the input common-mode voltage range includes
ground, even though operated from a single power supply voltage.
The LM193 series was designed to directly interface with TTL and
CMOS. When operated from both plus and minus power supplies,
the LM193 series will directly interface with MOS logic where their
low power drain is a distinct advantage over standard comparators.
FEATURES
Wide single supply voltage range 2.0VDC to 36VDC or dual
supplies ±1.0VDC, to ±18VDC
Very low supply current drain (0.8mA) independent of supply
voltage (2.0mW/comparator at 5.0VDC)
Low input biasing current 25nA
Low input offset current ±5nA and offset voltage ±2mV
Input common-mode voltage range includes ground
Differential input voltage range equal to the power supply voltage
Low output 250mV at 4mA saturation voltage
Output voltage compatible with TTL, DTL, ECL, MOS and CMOS
logic systems
APPLICATIONS
A/D converters
Wide range VCO
MOS clock generator
High voltage logic gate
Multivibrators
PIN CONFIGURATION
1
2
3
4 5
6
7
8
D, N, FE Packages
A B
TOP VIEW
OUTPUT A
INVERTING INPUT A
NON–INVERTING INPUT A
GND
V+
OUTPUT B
INVERTING INPUT B
NON–INVERTING INPUT B
SL00079
Figure 1. Pin Configuration
EQUIVALENT CIRCUIT
V +
100µA3.5µA 3.5µA 100µA
Q1
Q2 Q3
Q4
Q8
Q7
Q6Q5
– INPUT OUTPUT
+ INPUT
(One Comparator Only)
SL00080
Figure 2. Equivalent Circuit
ORDERING INFORMATION
DESCRIPTION TEMPERATURE RANGE ORDER CODE DWG #
8-Pin Ceramic Dual In-Line Package (Cerdip) -55°C to +125°C LM193FE 0580A
8-Pin Ceramic Dual In-Line Package (Cerdip) -25°C to +85°C LM293FE 0580A
8-Pin Plastic Dual In-Line Package (DIP) -25°C to +85°C LM293N SOT97-1
8-Pin Plastic Small Outline (SO) Package -25°C to +85°C LM293D SOT96-1
8-Pin Plastic Dual In-Line Package (DIP) -25°C to +85°C LM293AN SOT97-1
8-Pin Ceramic Dual In-Line Package (Cerdip) 0 to +70°C LM393AFE 0580A
8-Pin Ceramic Dual In-Line Package (Cerdip) 0 to +70°C LM393FE 0580A
8-Pin Plastic Small Outline (SO) Package 0 to +70°C LM393D SOT96-1
8-Pin Plastic Dual In-Line Package (DIP) 0 to +70°C LM393N SOT97-1
8-Pin Plastic Dual In-Line Package (DIP) 0 to +70°C LM393AN SOT97-1
8-Pin Plastic Dual In-Line Package (DIP) -40°C to +125°C LM2903N SOT97-1
8-Pin Plastic Dual In-Line Package (DIP) -40°C to +125°C LM2903D SOT97-1
Philips Semiconductors Product specification
LM193/A/293/A/393/A/2903Low power dual voltage comparator
1995 Nov 27 2
ABSOLUTE MAXIMUM RATINGS
SYMBOL PARAMETER RATING UNIT
VCC Supply voltage 36 or ±18 VDC
Differential input voltage 36 VDC
VIN Input voltage -0.3 to +36 VDC
PDMaximum power dissipation,
TA=25°C (still-air)1
F package
N package
D package
780
1160
780
mW
mW
mW
Output short-circuit to ground2Continuous
IIN Input current (VIN<-0.3VDC)350 mA
TAOperating temperature range
LM193/193A
LM293/293A
LM393/393A
LM2903
-55 to +125
-25 to +85
0 to +70
-40 to +125
°C
°C
°C
°C
TSTG Storage temperature range -65 to +150 °C
TSOLD Lead soldering temperature
(10sec max) 300 °C
NOTES:
1. Derate above 25°C, at the following rates:
F package at 6.2mW/°C
N package at 9.3mW/°C
D package at 6.2mW/°C
2. Short circuits from the output to V+ can cause excessive heating and eventual destruction. The maximum output current is approximately
20mA independent of the magnitude of V+.
3. This input current will only exist when the voltage at any of the input leads is driven negative. It is due to the collector-base junction of the
input PNP transistors becoming forward biased and thereby acting as input diode clamps. In addition to this diode action, there is also lateral
NPN parasitic transistor action on the IC chip. This transistor action can cause the output voltages of the comparators to go to the V+ voltage
level (or to ground for a large overdrive) for the time duration that an input is driven negative. This is not destructive and normal output states
will re-establish when the input voltage, which was negative, again returns to a value greater than -0.3VDC.
Philips Semiconductors Product specification
LM193/A/293/A/393/A/2903Low power dual voltage comparator
1995 Nov 27 3
DC AND AC ELECTRICAL CHARACTERISTICS
V+=5VDC, LM193/193A: -55°C TA +125°C, unless otherwise specified. LM293/293A: -25°C TA +85°C, unless otherwise specified.
LM393/393A: 0°C TA +70°C, unless otherwise specified. LM2903: -40°C TA+125°C, unless otherwise specified.
SYMBOL
PARAMETER
TEST CONDITIONS
LM193A LM293A/393A LM2903
UNIT
SYMBOL
PARAMETER
TEST CONDITIONS
Min Typ Max Min Typ Max Min Typ Max
UNIT
VOS Input offset voltage2TA=25°C
Over temp. ±1.0 ±2.0
±4.0 ±1.0 ±2.0
±4.0 ±2.0
±9±7.0
±15 mV
mV
VCM Input common-mode
voltage range3, 6TA=25°C
Over temp. 0
0V+-1.5
V+-2.0 0
0V+-1.5
V+-2.0 0
0V+-1.5
V+-2.0 V
V
VIDR Differential input
voltage1Keep all VINs 0VDC (or
V- if need) V+ V+ V+ V
IBIAS Input bias current4
IIN(+) or IIN(-) with output
in linear range
TA=25°C
Over temp. 25 100
300 25 250
400 25
200 250
500 nA
nA
IOS Input offset current IIN(+)-IIN(-)
TA=25°C
Over temp. ±3.0 ±25
±100 ±5.0 ±50
±150 ±5
±50 ±50
±200 nA
nA
IOL Output sink current VIN(-)1VDC, VIN(+)=0,
V01.5VDC
TA=25°C6.0 16 6.0 16 6.0 16 mA
Output leakage
current
V0=5VDC, TA=25°C
VIN(+)1VDC, VIN(-)=0
V0=30VDC
Over temp.
0.1
1.0
0.1
1.0
0.1
1.0
nA
µA
ICC
Supply current
RL= on both
comparators, TA=25°C0.8 1 0.8 1 0.8 1 mA
ICC
Supply current
RL= on both
comparators, V+=30V 1 2.5 1 2.5 1 2.5 mA
AVVoltage gain RL15k, V+=15VDC,
TA=25°C50 200 50 200 25 100 V/mV
VOL
Saturation voltage
VIN(-)1VDC, VIN(+)=0,
VOL
Saturation voltage
ISINK4mA
VOL Saturation voltage
OL
TA=25°C 250 400 250 400 400 400 mV
Over temp. 700 700 700 mV
tLSR Large-signal
response time
VIN=TTL logic swing,
VREF=1.4VDC
VRL=5VDC, RL=5.1k,
TA=25°C
300 300 300 ns
tRResponse time5VRL=5VDC, RL=5.1k
TA=25°C1.3 1.3 1.3 µs
Philips Semiconductors Product specification
LM193/A/293/A/393/A/2903Low power dual voltage comparator
1995 Nov 27 4
DC ELECTRICAL CHARACTERISTICS (Continued)
V+=5VDC, LM193/193A: -55°C TA +125°C, unless otherwise specified. LM293/293A: -25°C TA +85°C, unless otherwise specified.
LM393/393A: 0°C TA +70°C, unless otherwise specified. LM2903: -40°C TA+125°C, unless otherwise specified.
SYMBOL
PARAMETER
TEST CONDITIONS
LM193 LM293/393
SYMBOL
PARAMETER
TEST CONDITIONS
Min Typ Max Min Typ Max
VOS Input offset voltage2TA=25°C
Over temp. ±2.0 ±5.0
±9.0 ±2.0 ±5.0
±9.0 mV
mV
VCM Input common-mode
voltage range3, 6TA=25°C
Over temp. 0
0V±-1.5
V±-2.0 0
0V+-1.5
V+-2.0 V
V
VIDR Differential input
voltage1Keep all VINs 0VDC
(or V-if need) V+ V+ V
IBIAS Input bias current4
IIN(+) or IIN(-) with output
in linear range
TA=25°C
Over temp. 25 100
300 25 250
400 nA
nA
IOS Input offset current IIN(+)-IIN(-)
TA=25°C
Over temp. ±3.0 ±25
±100 ±5.0 ±50
±150
nA
nA
IOL Output sink current VIN(-)1VDC, VIN(+)=0,
V01.5VDC
TA=25°C6.0 16 6.0 16 mA
Output leakage current
VIN(+)1VDC, VIN(-)=0,
V0=5VDC
TA=25°C
V0=30VDC over temp. 0.1 1.0 0.1 1.0 nA
µA
ICC Supply current RL= on both comparators,
TA=25°C0.8 1 0.8 1 mA
RL= on both comparators,
V+=30V 2.5 2.5 mA
AVVoltage gain RL15k, V+=15VDC 50 200 50 200 V/mV
VOL Saturation voltage
VIN(-)1VDC, VIN(+)=0,
ISINK4mA
TA=25°C
Over temp. 250 400
700 250 400
700 mV
mV
tLSR Large signal
response time
VIN=TTL logic swing,
VREF=1.4VDC, VRL=5VDC
RL=5.1k,
TA=25°C
300 300 ns
tRResponse time5VRL=5VDC,
RL=5.1k
TA=25°C1.3 1.3 µs
NOTES:
1. Positive excursions of input voltage may exceed the power supply level by 17V. As long as the other voltage remains within the
common-mode range, the comparator will provide a proper output state. The low input voltage state must not be less than -0.3VDC (VDC
below the magnitude of the negative power supply, if used).
2. At output switch point, VO1.4VDC, RS=0 with V+ from 5VDC to 30VDC and over the full input common-mode range (0VDC to V+-1.5VDC).
3. The input common-mode voltage or either input signal voltage should not be allowed to go negative by more than 0.3V. The upper end of the
common-mode voltage range is V+-1.5V, but either or both inputs can go to 30VDC without damage.
4. The direction of the input current is out of the IC due to the PNP input stage. This current is essentially constant, independent of the state of
the output so no loading change exists on the reference or input lines.
5. The response time specified is for a 100mV input step with a 5mV overdrive.
6. For input signals that exceed VCC, only the over-driven comparator is affected. With a 5V supply, VIN should be limited to 25V maximum,
and a limiting resistor should be used on all inputs that might exceed the positive supply.
Philips Semiconductors Product specification
LM193/A/293/A/393/A/2903Low power dual voltage comparator
1995 Nov 27 5
EQUIVALENT CIRCUIT
100k500pF
10
0.1µF
20k
50k20k
V + /2
V +
30k5.1k
700k
V /2
+
+ VC
FREQUENCY
CONTROL
VOLTAGE
INPUT
3.0k
OUTPUT 1
OUTPUT 2
+
+
+ VREF HI
+ VIN
2RS
RS
2RS
+ V (12VDC)
10K
LAMP
2N2222
+
+
+
+ 5VDC
360
100 100k
+
+ 5VDC
360
100 100k
+
+ 5VDC
360
100 100k
+
+ 5VDC
360
100 100k
+ VREF 4
+ VREF 3
+ VREF 2
+ VREF 1
VO
+
V+
2.0k
V+
0
VO
I – 100kHz
CRYSTAL
200k
200k100k
0.1µF
Crystal–Controlled Oscillator
Limit Comparator
Two–Decade High–Frequency VCO
Visible Voltage Indicator
+
V+
TTL–to–MOS Logic Converter
NOTES:
V+ = 30VDC
+ 250m VDC < VC = 50VDC
700H < fO = 100kHz
NOTE:
Input of unused comparators should be grounded.
LM393
LM393
LM393
SL00081
Figure 3. Equivalent Circuit
Philips Semiconductors Product specification
LM193/A/293/A/393/A/2903Low power dual voltage comparator
1995 Nov 27 6
TYPICAL PERFORMANCE CHARACTERISTICS
INPUT VOLTAGE
V — mV
IN
OUTPUT VOLTAGE
V — mV
O
VOUT
VIN
+
+ 5V
80
60
40
20
0 10 20 30 40
v + — SUPPLY VOLTAGE — VDC
I — INPUT CURRENT — nA
N DC
TA = 0oC
TA = +70oC
TA = +25oC
TA = +125oC
VIN (CM) = 0
VDC
RIN (CM) = 10k
OUT OF
SATURATION
TA = 25o
10
1.0
0.1
0.01
0.001
0.01 0.1 1.0 10 100
IO — OUTPUT SINK CURRENT (mA)
V — SATURATION VOLTAGE (V )
O DC
6
5
4
3
2
1
0
0
–50
–100
0 0.5 1.0 1.5 2.0
TIME — µ sec
INPUT VOLTAGE
V — mV
IN
OUTPUT VOLTAGE
V — mV
O
5mV = INPUT OVERDRIVE
100mV
OVERDRIVE
TA = 25oC
5.1K
VOUT
VIN
20mV
+
+ 5V INPUT OVERDRIVE = 100mV
20mV
5mV
OVERDRIVE
6
5
4
3
2
1
0
0
–50
–100
0 0.5 1.0 1.5 2.0
TIME — µ sec
TA = 25oC
5.1K
Input Current Output Saturation Voltage
Response Time for Various
Input Overdrives —
Negative Transition
Response Time for Various
Input Overdrives —
Positive Transition
TA = –55oC
TA = –55oC
TA = +125oC
SL00082
Figure 4. Typical Performance Characteristics