9814 & 9852 SURFACE MOUNT REED RELAYS 9814 & 9852 Series Surface Mount Reed Relays Ideally suited to the needs of Automated Test Equipment, Instrumentation and Telecommunications requirements, Coto's 9814 & 9852 Series is a miniature Surface Mount Reed Relay that combines small size with exceptional RF performance. The 9814 extends life at ATE loads 3X or more utilizing Coto's proprietary switch technology. The external Magnetic Shield reduces interaction between parts in high density boards. The 9852 adds Form C capability. Small size plus added features allow for high density packing, and make these relays ideal for designs such as high speed, high pin count VLSI testers where high speed, small size and high performance are all needed. 9814 & 9852 Series Features u Available in Axial, Gull wing and "J" lead configurations u Tape and Reel packaging available u High reliability, hermetically sealed contacts for long life u High Insulation Resistance - 1012 minimum (Form A) u Coaxial shield for 50 impedance u 6.5 GHz bandwidth for RF and Pulse switching (fast rise time pulses) u External Magnetic Shield u RoHS compliant DIMENSIONS in Inches (Millimeters) Models 9814 & 9852 Axial2 J-Lead2 MAX. Gull Wing2 Ordering Information NOTE u For RF Graph Performance, see "RF Graphs" section of the Reed Relay Technical & Application Information Part Number Model Number 9814 9852 Coil Voltage 03 = 3.3 volts (9814) 05 = 5 volts 9XXX-XX-XX Lead Style 00 = Gull Wing 10 = Axial 20 = J- Lead 07082013 tel: (401) 943.2686 | fax: (401) 942.0920 MODEL NUMBER Parameters Test Conditions Units 9814 9852 1 Form A 50 Coaxial 1 Form C 50 Coaxial COIL SPECS. Nom. Coil Voltage VDC 3.3 5 5 Max. Coil Voltage VDC 4 6 6 +/- 10%, 25 C 70 150 110 Operate Voltage Must Operate by VDC - Max. 2.5 3.8 3.8 Release Voltage Must Release by VDC - Min. 0.4 0.4 0.4 Switching Voltage Max DC/Peak AC Resist. Volts 100 Switching Current Max DC/Peak AC Resist. Amps 0.25 0.1 Carry Current Max DC/Peak AC Resist. Amps 0.5 0.2 Contact Rating Max DC/Peak AC Resist. Watts 3 3 Life Expectancy-Typical1 Signal Level 1.0V, 10mA x 106 Ops. 1000 100 N/C 200 N/O Static Contact Resistance (max. init.) 50mV, 10mA 0.125 0.150 Dynamic Contact Resistance (max. init.) 0.5V, 50mA at 100 Hz, 1.5 msec 0.150 0.150 Insulation Resistance (minimum) Between all Isolated Pins at 100V, 25C, 40% RH 1012 109 Capacitance - Typical Across Open Contacts No Shield Shield Floating Shield Guarding pF pF pF 0.2 1.0 Open Contact to Coil No Shield Shield Floating Shield Guarding pF pF pF 0.5 1.0 Coil Resistance CONTACT RATINGS 30 RELAY SPECIFICATIONS Closed Contact to Coil Shield Guarding pF 0.5 0.5 Contacts Open, Shield Floating pF - - Dielectric Strength (minimum) Between Contacts Contacts to Shield Contacts/Shield to Coil VDC/peak AC VDC/peak AC VDC/peak AC 200 1500 1500 200 1000 1000 Operate Time - including bounce - Typical At Nominal Coil Voltage, 30 Hz Square Wave msec. 0.25 1.0 msec. 0.05 Contact to Shield Release Time - Typical Top View: Dot stamped on top of relay refers to pin #1 location 9802 9852 1.0 2 24 4 6 68 8 2 4 6 8 1 13 3 5 57 7 1 3 5 7 Notes: 1 2 Consult factory for life expectancy at other switching loads. Contact resistance 2.0 defines end of life. Surface mount component processing temperature: 500F / 260C max for 1 minute dwell time. Temperature measured on leads where lead exits molded package. Environmental Ratings: Storage Temp: -35C to +100C; Operating Temp: -20C to +85C All electrical parameters measured at 25C unless otherwise specified. Vibration: 20 G's to 2000 Hz; Shock: 50 G's 07082013 For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC.