FIBER OPTIC TECHNOLOGY CALIBRATION LABORATORY Plug-Type (Male/Female) Attenuators CBA series - Multimode Description: The plug-type CBA series multimodemode attenuators are used directly on the ends of fiberoptic jumpers prior to installation in adapters. These attenuators provide a fixed level of attenuation at defined wavelength. The CBA series multimode attenuators are available for SC, FC and ST connector types. Operational wavelength is 850 nm or 1300 nm. Features: * * * * * * Precise attenuation Multimode applications Operational wavelength 850 nm or 1300 nm Attenuation range 2 - 10 dB Easy installation High power endurance Application: * * * * * * Fiberoptic systems Receiver padding for optical receiver protection Optical power equalization Linearity and dynamic range testing in laboratory equipment Optical margin testing BER testing is registered trademark of Optokon Co., Ltd. Other names and trademarks mentioned herein may be the trademarks of their respective owners. Optokon Co., Ltd., Cerveny Kriz 250, 586 02 Jihlava, Czech Republic tel. +420 564 040 111, fax +420 564 040 134, +420 567 311 292, www.optokon.com, info@optokon.cz 1 ATT_04-01_EN 07/11/2003 FIBER OPTIC TECHNOLOGY CALIBRATION LABORATORY Specifications: Parameter 2 -10 dB 850 or 1300 nm Attenuation range Operational wavelength Stability attenuation range 2 to 5 dB 0.8 dB attenuation range 6 to 10 dB 1.0 dB Return loss Power durability Operating temperature >30 dB 150 mW -25 to 70 C Storage temperature -40 to 80 C Ordering Code: CBA - XX - XX - XX - XX attenuation connector type 02 03 04 05 06 07 08 09 10 SL PC SC 2 dB 3 dB 4 dB 5 dB 6 dB 7 dB 8 dB 9 dB 10 dB ST/PC FC/PC SC/PC wavelength 85 13 850 nm 1300 nm fiber type M5 MM 50/125 m M6 MM 62.5/125 m Samples of Attenuators CBA-10-PC-M6-85 CBA-10-SC-M6-85 CBA-10-SL-M6-85 ST(R) is trademark of Lucent Technologies, Inc. is registered trademark of Optokon Co., Ltd. Other names and trademarks mentioned herein may be the trademarks of their respective owners. Optokon Co., Ltd., Cerveny Kriz 250, 586 02 Jihlava, Czech Republic tel. +420 564 040 111, fax +420 564 040 134, +420 567 311 292, www.optokon.com, info@optokon.cz 2 ATT_04-01_EN 07/11/2003