M10, M11, M12, M25 Not for New Designs, alternatively please use TNPW e3 Vishay Draloric Thin Film, Rectangular, Resistor Chips FEATURES * Metal film layer on high quality ceramic * Protective top coat RoHS * Pure tin on nickel barrier layer COMPLIANT * Low temperature coefficient and tight tolerances * 56 days at 40 C and 93 % relative humidity down to 0.2 % STANDARD ELECTRICAL SPECIFICATIONS SIZE MODEL POWER RATING P70 C LIMITING ELEMENT TEMPERATURE VOLTAGE MAX. COEFFICIENT V ppm/K INCH METRIC EN 140 401-801 EIA 575 M10 0402 1005 0.063 0.063 25 M11 0603 1608 0.1 0.063 75 M12 M25 0805 1206 2012 3216 0.125 0.1 0.25 150 0.125 200 RESISTANCE RANGE E-SERIES TOLERANCE % 25 0.5; 1 10R - 20K 50 0.5 10R - 20K 25 0.1; 0.25; 0.5; 1 10R - 56K 50 0.1; 0.25; 0.5; 10R - 56K 25 0.1; 0.25; 0.5; 1 10R - 100K 50 0.1; 0.25; 0.5; 10R - 100K 25 0.1; 0.25; 0.5; 1 10R - 220K 50 0.1; 0.25; 0.5; 10R - 220K 24 - 96 24 - 96 24 - 96 24 - 96 Notes: * Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material * Marking: 4 digits, M10 - no marking TECHNICAL SPECIFICATIONS PARAMETER UNIT M10 Rated Dissipation at 70 C (EN 140 401-801| EIA 575) W 0.063 Limiting Element Voltage (2) V 25 75 150 200 Vdc/ac peak > 50 > 100 > 200 > 300 Insulation Voltage (1 min) 870 (1) M11 0.1 M12 0.063 550 (1) 0.125 0.1 440 (1) Thermal Resistance (1) K/W Insulation Resistance > 10 9 Category Temperature Range C - 55 to + 125 (+ 155) Failure Rate h-1 0.3 x 10- 9 Weight/1000 pieces g 0.65 - - 2 M25 - 5.5 0.25 0.125 220 (1) - 10 Notes: (1) Measuring (2) Rated conditions in acc. with EN 140 401-801 voltage: P x R www.vishay.com 202 For technical questions, contact: filmresistors.thinfilmchip@vishay.com Document Number: 20028 Revision: 08-Jan-09 Not for New Designs, alternatively please use TNPW e3 M10, M11, M12, M25 Thin Film, Rectangular, Resistor Chips Vishay Draloric DIMENSIONS SIZE DIMENSIONS [in millimeters] INCH METRIC L W H T1 T2 0402 1005 1.0 0.05 0.5 0.05 0.35 0.05 0.25 0.1 0.2 0.1 0603 + 0.10 1608 1.55 - 0.05 0.85 0.1 0.45 0.05 0.30 0.2 0.3 0.2 0805 2012 + 0.20 2.0 +- 0.20 0.10 1.25 0.15 0.45 0.05 0.30 - 0.10 0.3 0.2 1206 3216 3.2 +- 0.10 0.20 1.6 0.15 0.55 0.05 0.45 0.2 0.4 0.2 SOLDER PAD DIMENSIONS [in millimeters] REFLOW SIZE WAVE SOLDERING INCH METRIC a b l a b l 0402 1005 0.4 0.6 0.5 0603 1608 0.5 0.9 1.0 0.9 0.9 1.0 0805 2012 0.7 1.4 1.2 0.9 1.3 1.3 1206 3216 0.9 1.7 2.0 1.1 1.7 2.3 0 0 0 PART NUMBER AND PRODUCT DESCRIPTION PART NUMBERING: M1004020D5620DP000 M MODEL/SIZE M100402 M110603 M120805 M251206 1 0 0 4 SPECIAL CHARACTER 0 = Neutral 0 2 0 TCR D = 25 ppm/K C = 50 ppm/K D 5 6 2 VALUE 3 digit value 1 digit multiplier Multiplier 8 = *10- 2 9 = *10- 1 0 = *100 1 = *101 2 = *102 3 = *103 0 D TOLERANCE B = 0.1 % C = 0.25 % D = 0.5 % F=1% P PACKAGING (1) P0 P1 P5 PN PZ SPECIAL Up to 2 digits 00 = standard PRODUCT DESCRIPTION: M10 25 562R 0.5 % P0 M10 25 562R 0.5 % P0 MODEL M10 M11 M12 M25 TCR 25 ppm/K 50 ppm/K RESISTANCE VALUE 49K9 = 49.9 k 5R1 = 5.1 TOLERANCE 0.1 % 0.25 % 0.5 % 1% PACKAGING (1) P0 P1 P5 PN PZ Notes: (1) Please refer to table PACKAGING, page 146 (2) Products can be ordered using either the PRODUCT DESCRIPTION or the PART NUMBER Document Number: 20028 Revision: 08-Jan-09 For technical questions, contact: filmresistors.thinfilmchip@vishay.com www.vishay.com 203 M10, M11, M12, M25 Not for New Designs, alternatively please use TNPW e3 Thin Film, Rectangular, Resistor Chips Vishay Draloric PACKAGING REEL PACKING CODE MODEL TAPE WIDTH DIAMETER PIECES/REEL PAPER M10 8 mm 180 mm/7" 330 mm/13" 10 000 50 000 P0 PZ M11 M12 M25 8 mm 180 mm/7" 180 mm/7" 330 mm/13" 1000 (1) 5000 20 000 P1 P5 PN 90 80 0402 0603 0805 Rated Power in % Temperature in Rise in C Note: (1) For TCR 25 ppm/K and Tolerance 0.1 % only 1206 70 60 50 120 100 80 60 40 40 30 20 20 10 0 0.1 0.2 0.3 0.4 Non-Linearity A3 in dB Temperature Rise 0 - 55 0.5 Power in W 120 110 100 M25 -25 0 25 50 75 100 125 150 175 70 Ambient Temperature in C Derating Current Noise in V/V 0 3 2 1 0.5 M10 M11 M12 M25 0.3 90 0.1 80 M10 M12 M11 70 60 10 100 Non-Linearity www.vishay.com 204 0.05 0.03 1K 10K 100K Resistance Value in W 0.01 100 Current Noise 1K For technical questions, contact: filmresistors.thinfilmchip@vishay.com 10K 100K 1M Resistance Value in W Document Number: 20028 Revision: 08-Jan-09 Not for New Designs, alternatively please use TNPW e3 M10, M11, M12, M25 60 [Z]-RO in % RO Phase Angle in Thin Film, Rectangular, Resistor Chips M11 40 20 10 0 Vishay Draloric 60 M11 40 20 10 100 100 0 100 1K - 20 - 20 1K - 40 - 40 4.75K - 80 10K 10K 2 5 10 50 HF Performance 100 500 1000 Frequency f in MHz 60 M12 40 - 80 20 10 0 2 5 10 50 100 HF Performance [Z]-RO in % RO Phase Angle in - 60 4.75K - 60 500 1000 Frequency f in MHz 60 M12 40 20 10 100 0 100 1K - 20 - 20 1K - 40 - 40 - 60 2 5 10 50 Test Voltage in V HF Performance 100 Frequency f in MHz 3K M12 1K M11 100 10 10R - 80 500 1000 10K 2 5 10 50 HF Performance Test Voltage in V - 80 - 60 10K 100 500 1000 Frequency f in MHz 3K 1K M12 M11 100 100R 1K 10K 100K 10 10R 100R Resistance Value in Single-Pulse High Voltage Overload Test 1.2/50 s EN140000 4.27 Document Number: 20028 Revision: 08-Jan-09 1K 10K 100K Resistance Value in Single-Pulse High Voltage Overload Test 10/700 s EN140000 4.27 For technical questions, contact: filmresistors.thinfilmchip@vishay.com www.vishay.com 205 M10, M11, M12, M25 Thin Film, Rectangular, Resistor Chips Vishay Draloric 100 Power Rating P in W Power Rating P in W Not for New Designs, alternatively please use TNPW e3 M25 10 M12 M11 M10 1 0.1 10- 4 10- 2 0 Pulse Voltage Umax in V Pulse Rating P 10- 3 M25 10 10- 1 1 10 Square Pulse ti in s 1000 M12 M11 M10 1 0.1 Secondary conditions: a) P 0 (peak pulse, single pulse) b) u 70 C c) Umax see diagram (Max pulse voltage) 0.01 10- 5 100 Secondary conditions: a) P P70 (permissible constant power at u = 70 C) b) u 70 C c) Umax see diagram (Max pulse voltage) 0.01 10-5 10-4 10-3 Pulse Rating P P70 10-2 10-1 1 10 Square Pulse ti in s Secondary conditions: a) P see diagram (pulse Rating) b) u 70 C 800 600 M25 M12 400 200 M11 M10 0 10 - 5 10 - 4 10 - 3 Maximum Pulse Voltage 10 - 2 10 - 1 1 10 Square Pulse ti in s ASSEMBLY The suitability of conformal coatings, if applied, shall be qualified by appropriate means to ensure the long-term stability of the whole system. www.vishay.com 206 For technical questions, contact: filmresistors.thinfilmchip@vishay.com Document Number: 20028 Revision: 08-Jan-09 Not for New Designs, alternatively please use TNPW e3 M10, M11, M12, M25 Thin Film, Rectangular, Resistor Chips Vishay Draloric PERFORMANCE TEST RESULTS TEST CONDITIONS OF TEST TOLERANCES 0.1 %/ 0.25 % 0.5 %/ 1.0 % 1000 h at 70 C, 1.5 h "ON", 0.5 h "OFF" 0.2 % 0.5 % 1000 h at 125 C without load 0.2 % 0.5 % Overload Test Short time overload for 2 s IEC 60115-1 4.13 2.5 x rated voltage or 2 x limiting element voltage 0.05 % 0.1 % 0.05 % 0.1 % 56 days at 40 C and 93 % relative humidity 0.2 % 0.5 % 10 s at 260 C solder bath temperature 0.05 % 0.2 % Endurance Test at 70 C IEC 60115-1 4.25.1 Endurance at UCT IEC 60115-1 4.25.3 Thermal Shock Rapid change between upper and lower IEC 60115-1 4.19, IEC category temperature 60068-2-14 Damp Heat Steady State IEC 60115-1 4.24, IEC 60068-2-3 Resistance to Soldering Heat IEC 60115-1 4.18, IEC 60068-2-20 APPLICABLE SPECIFICATIONS * CECC40000/40400/40401-801 * EN140400/IEC 60115 - 1/EN 140 401-801 Document Number: 20028 Revision: 08-Jan-09 For technical questions, contact: filmresistors.thinfilmchip@vishay.com www.vishay.com 207 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1