8 PIN DIP HIGH SPEED 1Mbit/s TRANSISTOR PHOTOCOUPLER 6N135 6N136 ICPL4502 Features * High speed 1Mbit/s * High isolation voltage between input and output (Viso=5000 Vrms ) * Guaranteed performance from 0C to 70C * Wide operating temperature range of -55C to 100C * Pb free and RoHS compliant Description The 6N135, 6N136 and ICPL4502 devices each consist of an infrared emitting diodes, optically coupled to a high speed photo detector. A separate connection for the photodiode bias and output-transistor collector increase the speed by several orders of magnitude over conventional phototransistor couplers by reducing the base-collector capacitance of the input transistor. They are packaged in an 8-pin DIP package and available in wide-lead spacing and SMD option. Applications * Line receivers * Telecommunication equipments * Power transistor isolation in motor drives * Replacement for low phototransistor photo couplers * Feedback loop in switch-mode power supplies * Home appliances * High speed logic ground isolation Schematic 1 8 1 8 2 7 2 7 3 6 3 6 4 5 4 5 6N135 / 6N136 Pin Configuration 1. No Connection 2. Anode 3. Cathode 4. No Connection 5. Gnd 6. Vout 7. VB 8. VCC Isocom Components Ltd Document No DC93134 1 Rev. 1 ICPL4502 Pin Configuration 1. No Connection 2. Anode 3. Cathode 4. No Connection 5. Gnd 6. Vout 7. No Connection 8. VCC http://www.isocom.com April 8, 2009 8 PIN DIP HIGH SPEED 1Mbit/s TRANSISTOR PHOTOCOUPLER 6N135 6N136 ICPL4502 Absolute Maximum Ratings (Ta=25C) Parameter Input Symbol Rating Unit Forward current IF 25 mA Peak forward current (50% duty, 1ms P.W) IFP 50 mA Peak transient current (1s P.W,300pps) IFtrans 1 A Reverse voltage VR 5 V Power dissipation PIN 45 mW Power dissipation PO 100 mW Emitter-Base reverse voltage 6N135 6N136 VEBR 5 V Base current 6N135 6N136 IB 5 mA Average Output current IO(AVG) 8 mA Peak Output current IO(PK) 16 mA Output voltage VO -0.5 to 20 V Supply voltage VCC -0.5 to 30 V Isolation voltage *1 VISO 5000 V rms Operating temperature TOPR -55 ~ +100 C Storage temperature TSTG -55 ~ +125 C Soldering temperature *2 TSOL 260 C Output Notes *1 AC for 1 minute, R.H.= 40 ~ 60% R.H. In this test, pins 1, 2, 3, 4 are shorted together, and pins 5, 6, 7, 8 are shorted together. *2 For 10 seconds. Isocom Components Ltd Document No DC93134 2 Rev. 1 http://www.isocom.com April 8, 2009 6N135 6N136 ICPL4502 8 PIN DIP HIGH SPEED 1Mbit/s TRANSISTOR PHOTOCOUPLER Electrical Characteristics (TA=0 to 70C unless specified otherwise) Input Parameter Symbol Min. Typ.* Max. Unit Forward voltage VF - 1.45 1.8 V IF = 16mA Reverse Voltage VR 5.0 - - V IR = 10A VF/TA - -1.9 - mV/C IF =16mA Symbol Min. Typ.* Max. Unit - 0.001 0.5 - 0.01 1 - - 50 - 150 200 - 0.01 1 - - 2 Temperature coefficient of forward voltage Conditions Output Parameter Logic High Output Current Logic Low Supply Current Logic High Supply Current IOH ICCL ICCH Conditions IF=0mA, VO=VCC=5.5V, TA=25C A IF=0mA, VO=VCC=15V, TA=25C IF=0mA, VO=VCC=15V A IF=16mA, VO=Open, VCC=15V IF=0mA, VO=Open, VCC=15V, TA=25C A IF=0mA, VO=Open, VCC=15V * Typical values at TA = 25C Isocom Components Ltd Document No DC93134 3 Rev. 1 http://www.isocom.com April 8, 2009 6N135 6N136 ICPL4502 8 PIN DIP HIGH SPEED 1Mbit/s TRANSISTOR PHOTOCOUPLER Transfer Characteristics (TA=0 to 70C unless specified otherwise) Parameter Symbol Min. Typ.* Max. 7 - 50 19 - 50 5 - - 15 - - 6N135 - 0.18 0.4 IF = 16mA ,IO = 1.1mA, VCC=4.5V, TA=25C 6N136 ICPL4502 - 0.18 0.4 IF = 16mA ,IO = 3mA, VCC=4.5V, TA=25C 6N135 6N136 Current Transfer ICPL4502 Ratio 6N135 CTR 6N136 ICPL4502 Logic Low Output Voltage VOL Unit Conditions IF = 16mA ,VO = 0.4V, VCC=4.5V, TA=25C % IF = 16mA ,VO = 0.5V, VCC=4.5V V 6N135 - 0.5 IF = 16mA ,IO = 0.8mA, VCC=4.5V 6N136 ICPL4502 - 0.5 IF=16mA ,IO=2.4mA, VCC=4.5V Switching Characteristics (TA=0 to 70C unless specified otherwise, IF=16mA, Vcc=5V) Parameter Propagation Delay Time to Logic Low Propagation Delay Time to Logic High Common Mode Transient Immunity at Logic High Common Mode Transient Immunity at Logic Low Symbol Min. Typ.* Max. - 0.15 1.5 - - 2.0 - 0.15 0.8 - - 1.0 RL=1.9K - 0.7 1.5 RL=4.1K, TA=25C - - 2.0 - 0.4 0.8 - - 1.0 1,000 - - 1,000 - - IF = 0mA , VCM=10Vp-p, RL=1.9K, TA =25C 1,000 - - IF = 16mA , VCM=10Vp-p, RL=4.1K, TA =25C 6N135 TPHL 6N136 ICPL4502 6N135 6N136 ICPL4502 TPLH 6N135 6N136 ICPL4502 CMH 6N135 6N136 ICPL4502 Isocom Components Ltd Document No DC93134 Unit RL=4.1K, TA=25C s s 4 Rev. 1 - - RL=4.1K RL=1.9K, TA=25C RL=1.9K V/s 1,000 RL=4.1K RL=1.9K, TA=25C V/s CML Conditions IF = 0mA , VCM=10Vp-p, RL=4.1K, TA =25C IF = 16mA , VCM=10Vp-p, RL=1.9K, TA=25C http://www.isocom.com April 8, 2009 8 PIN DIP HIGH SPEED 1Mbit/s TRANSISTOR PHOTOCOUPLER 6N135 6N136 ICPL4502 Typical Performance Curves Isocom Components Ltd Document No DC93134 5 Rev. 1 http://www.isocom.com April 8, 2009 8 PIN DIP HIGH SPEED 1Mbit/s TRANSISTOR PHOTOCOUPLER 6N135 6N136 ICPL4502 Figure 8 Switching Time Test Circuit & Waveform Figure 9 Transient Immunity Test Circuit & Order Information Isocom Components Ltd Document No DC93134 6 Rev. 1 http://www.isocom.com April 8, 2009 8 PIN DIP HIGH SPEED 1Mbit/s TRANSISTOR PHOTOCOUPLER 6N135 6N136 ICPL4502 Part Number 6N13XY or ICPL4502Y Note X Y = Part No. (X = 5 or 6 for 6N13X) = Lead form option (G SM or none) Option Description Packing quantity None Standard DIP-8 45 units per tube G Wide lead bend (0.4 inch spacing) 45 units per tube SM Surface mount lead in tubes 45 units per tube SM T+R Surface mount lead form (low profile) + TA tape & reel option 1000 units per reel Isocom Components Ltd Document No DC93134 7 Rev. 1 http://www.isocom.com April 8, 2009 8 PIN DIP HIGH SPEED 1Mbit/s TRANSISTOR PHOTOCOUPLER 6N135 6N136 ICPL4502 Package Drawing (Dimensions in mm) Standard DIP Type Option G Type Isocom Components Ltd Document No DC93134 8 Rev. 1 http://www.isocom.com April 8, 2009 8 PIN DIP HIGH SPEED 1Mbit/s TRANSISTOR PHOTOCOUPLER 6N135 6N136 ICPL4502 Option SM Type Isocom Components Ltd Document No DC93134 9 Rev. 1 http://www.isocom.com April 8, 2009 8 PIN DIP HIGH SPEED 1Mbit/s TRANSISTOR PHOTOCOUPLER 6N135 6N136 ICPL4502 Recommended pad layout for surface mount leadform Device Marking 6N136 IYWW Notes 6N136 Y WW I denotes Device Number denotes 1 digit Year code denotes 2 digit Week code denotes Isocom Isocom Components Ltd Document No DC93134 10 Rev. 1 http://www.isocom.com April 8, 2009 6N135 6N136 ICPL4502 8 PIN DIP HIGH SPEED 1Mbit/s TRANSISTOR PHOTOCOUPLER Tape & Reel Packing Specifications Direction of feed from reel Tape dimensions Dimension No. A B Do D1 E F Dimension(mm) 10.40.1 10.00.1 1.50.1 1.50.1 1.750.1 7.50.1 Dimension No. Po P1 P2 t W K Dimension(mm) 4.00.1 12.00.1 2.00.1 0.40.1 16.0+0.3/ -0.1 4.50.1 Isocom Components Ltd Document No DC93134 11 Rev. 1 http://www.isocom.com April 8, 2009 8 PIN DIP HIGH SPEED 1Mbit/s TRANSISTOR PHOTOCOUPLER 6N135 6N136 ICPL4502 Solder Reflow Temperature Profile 260 C (peak,10 >255 C ( 30s 217 200 1-3 C/Sec 60 - 140 Sec 150 70 - 170 Sec 1-3 C/Sec TIME (S) Isocom Components Ltd Document No DC93134 12 Rev. 1 http://www.isocom.com April 8, 2009 8 PIN DIP HIGH SPEED 1Mbit/s TRANSISTOR PHOTOCOUPLER 6N135 6N136 ICPL4502 DISCLAIMER 1. Above specification may be changed without notice. ISOCOM will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. ISOCOM assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of ISOCOM corporation. Please don't reproduce or cause anyone to reproduce them without ISOCOM's consent. Isocom Components Ltd Document No DC93134 13 Rev. 1 http://www.isocom.com April 8, 2009