.%/WKUX.%/ Single-Phase Bridge Rectifiers Reverse Voltage 50 to 1000V Forward Current 4.0A )HDWXUHV Ideal for printed circuit boards High surge current capability High case dielectric strength of 1500 VRMS Solder Dip 260 C, 40 seconds 0HFKDQLFDO'DWD Package: KBL Case: KBL Epoxy meets UL-94V-0 Flammability rating Terminals: Silver plated (E4 Suffix) leads, solderable per J-STD-002B and JESD22-B102D Polarity: As marked on body Mounting Torque: 10 cm-kg (8.8 inches-lbs) max. Recommended Torque: 5.7 cm-kg (5 inches-lbs) Typical Applications Schematic Diagram General purpose use in ac-to-dc bridge full wave rectification for Monitor, TV, Printer, SMPS, Adapter, Audio equipment, and Home Appliances applications Maximum Ratings and Electrical Characteristics (TA=25C unless otherwise noted Parameter Symbols KBL005 K B L 01 K B L 02 K B L 04 Maximum repetitive peak reverse voltage VRRM 50 100 200 400 Maximum RMS voltage VRMS 35 70 140 280 Maximum DC blocking voltage V DC 50 100 200 400 600 Maximum average forward output current at TA=50oC IF(AV) 4.0 Amps Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 200.0 Amps Maximum instantaneous forward voltage drop per leg at 2.0A VF 1.1 Volts IR 5.0 1.0 uA mA RJA RJL 19 (1) 2.4 (2) TJ, TSTG -55 to +150 Maximum DC reverse current at rated DC blocking voltage per leg TA=25oC TA=125oC Typical thermal resistance per leg Operating junction and storage temperature range Notes: K B L 06 K B L 08 K B L 10 600 800 1000 Volts 420 560 700 Volts 800 1000 Volts 1. Thermal resistance from junction to ambient with units mounted on 3.0 x 3.0 x 0.11" thick (7.5 x 7.5 x 0.3 cm) Al. plate 2. Thermal resistance from junction to lead with units mounted on P.C.B. at 0.375" (9.5 mm) lead length and 0.5 x 0.5" (13 x 13 mm) copper pads 1/3 Units o C/W o C .%/WKUX.%/ Single-Phase Bridge Rectifiers Reverse Voltage 50 to 1000V Forward Current 4.0A Ratings and Characteristics Curves 2/3 (TA = 25C unless otherwise noted) .%/WKUX.%/ Single-Phase Bridge Rectifiers Reverse Voltage 50 to 1000V Forward Current 4.0A ut in inches (millimeters) KBL .640(16.3) .618(15.7) .600(15.2) .540(13.7) AC .052(1.3) .048(1.2) DIA .630(16.0) MIN .220(5.6) .181(4.6) .256(6.5) .071 .217(5.5) .768(19.5) (1.8) .728(18.5) www.goodarksemi.com 3/3 Doc. USKBLxxxJD2.0