SPECIFICATION CONTROL DRAWING
Tyco Electronics Corporation
300 Constitution Drive,
Menlo Park, CA. 94025, U.S.A. Raychem
TITLE:
COAXIAL SOLDERSLEEVE DEVICE
WITH PRE-INSTALLED LEAD
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS. DOCUMENT NO.: D-181-22GA-90/9
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Tyco Electronics reserves the right to amend
this drawing at any time. Users should
evaluate the suitability of the product for their
application.
DATE:
Jun. 15, 1998
DOC ISSUE:
3
DRAWN BY:
M. FORONDA
CAGE CODE:
06090
REPLACES:
D18122XX
DCR NUMBER:
D981012
PROD. REV.:
SEE TABLE
SCALE:
None
SIZE:
A
SHEET:
1 of 1
If this document is printed it becomes uncontrolled. Check for the latest revision.
© 2004 Tyco Electronics Corporation. All rights reserved
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride.
2. SOLDER PREFORM WITH FLUX:
SOLDER: TYPE Sn63 per ANSI-J-STD-006.
FLUX: TYPE ROL1 per ANSI-J-STD-004.
3. MELTABLE RINGS: Thermally stabilized thermoplastic. Color: gray.
4. GROUND LEAD: Raychem 55A0111-GA-9 in accordance with MIL-W-22759/32, AWG GA (see table), stranded tin plated.
Color: white
5. GROUND LEAD: Raychem 55A0111-GA-90 in accordance with MIL-W-22759/32, AWG GA (see table), stranded tin plated.
Color: white with black stripe.
APPLICATION
1. These parts are designed to provide an environment protected coaxial termination on cables, rated for 125°C minimum, meeting the
dimensional criteria listed, having a tin or silverplated copper shields.
2. Temperature range: -55°C to +150°C. Install using Raychem-approved convection or infrared heating tools in accordance with
Raychem process standard RCPS-200-36.
For best results, prepare the cable as shown:
SolderSleeve is a trademark of Tyco Electronics Corporation.
GA = WIRE GAUGE (AWG)
Product Revision Product Dimensions
Product Name øA
min
øB
min
øC
min
øD
min
øE
min
øF
min
L1
max
L2
max
K
min
AWG
D-181-2220-90/9 F 20
D-181-2222-90/9 F 4.50 4.00 3.45 2.90 3.00 1.10 17.00 22.7 150 22
D-181-2224-90/9 F (0.180) (0.160) (0.135) (0.115) (0.120) (0.045) (0.670) (0.895) (5.900) 24
D-181-2226-90/9 F 26
