1.575 GHz GPS Ceramic Patch Antenna Pulse Part Number W3213 Pulse is please to announce the W3213 GPS patch antenna to compliment our growing range of tracking antenna products. This small 0.5 x .05 inch (13 x 13 mm) ceramic patch antenna is 0.16 inches (4 mm) high and has a pinthrough mount. Double sided tape is on the underside of the antenna for adhesion to the customer board. Operating at 1.575 GHz, L1 GPS band, the W3213 patch provides circularly polarized radiation patterns to connect to satellite systems. Performance in this specification sheet is based on a ground plan of 1.2 x 1.2 inches (30 x 30 mm) delivering a gain of -1.5 dBic at Zenith and 10 degrees with 3dB axial ratio at Zenith. Increasing the size of the ground plane can significantly boost the actual application. Contact Pulse for applications support to get the best performance from your Navigation systems. Solutions for Glonass bands and surface mount patch antennas are also available on request. Features - Small footprint - Right Hand Circular Polarization - GPS L1 Band - 1.575 GHz - RoHS Compliant Product Applications - Vehicle navigation and location - Personal hand held tracking systems - Healthcare and medical devices - Small portable tracking equipment GPS L1 Band Patch Antenna Typical performance (measured on 1.2 x 1.2 inch [30 x 30 mm] FR-4 ground plane) Item Typical Performance Unit Center Frequency 1575.42 MHz Polarization Right Hand Circular -- RHCP Gain @ Zenith -1.5 dBic RHCP Gain @ 10 Elevation -1.5 dBic Axial Ratio @ Zenith 3 dB VSWR 1.6 Max -- Impedance 50 San Diego, CA 858 674 8100 Vancouver, WA 360 944 7551 1 Europe 49 7032 7806 0 Asia 86 755 33966678 pulseelectronics.com/products/antennas North Asia 886 3 4356768 China 86 512 6807 9998 L110.A (04/11) 1.575 GHz GPS Ceramic Patch Antenna Pulse Part Number W3213 Mechanical Specifications 1 2 No. Item Description 1 Feed Pin Silver plated brass 2 Adhesive 0.13 mm thick double sided tape Notes: Feed pin manual soldering conditions: * 300 C max soldering iron temperature, 5 seconds max * Typical lead free solders are applicable Electrode silver metallization may tarnish if antenna is stored/used in corrosive environment, especially where chloride, sulphur or sulfide, alkali or acid salts exist in the air. Corrosive gases may cause oxidation of electrodes and reduce solderability. NOTE: Antennas are delivered in trays (80 antennas per tray), 10 trays per shipping box (800 antennas per shipping box). 2 pulseelectronics.com/products/antennas L110.A (04/11) 1.575 GHz GPS Ceramic Patch Antenna Pulse Part Number W3213 Radiation Patterns Vertical Plane T F A R For More Information Pulse Worldwide Headquarters 12220 World Trade Drive San Diego, CA 92128 U.S.A. Larsen Brand Antennas 3611 NE 112th Avenue Vancouver, WA 98682 USA D Europe Headquarters Pulse GmbH & Do, KG Zeppelinstrasse 15 Herrenberg Germany Asia Headquarters B402, Shenzhen Academy of Aerospace Technology Bldg. 10th Kejinan Road, High-Tech Zone Nanshan District, Shenzen, PR China 518057 Pulse North Asia 3F, No. 198, Zhongyuan Road Zhongli City, Taoyuan County 320 Taiwan R. O. C. Pulse (Suzhou) Wireless Products Co, Inc. 99 Huo Ju Road, (#29 Bldg, 4th Phase) Suzhou New District Science & Tech Industrial Park Jiangsu Province, Suzhou 215009 PR China Tel: 49 7032 7806 0 Tel: 86 755 33966678 Tel: 886 3 4356768 Tel: 86 512 6807 9998 Tel: 858 674 8100 Tel: 360 944 7551 Fax: 858 674 8262 Fax: 369 944 7556 Fax: 49 7032 7806 135 Fax: 86 755 33966700 Fax: 886 3 4356823 Fax: 86 512 6809 8023 Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. (c) Copyright, 2010. Pulse Electronics, Inc. All rights reserved. 3 pulseelectronics.com/products/antennas L110.A (04/11)