Crimp 5.0mm XL CONNECTOR Disconnectable Crimp style connectors (.197") pitch Features ------------------------ * Reliable housing construction Since all contacts are individually and totally surrounded by housing walls, and since the connector pitch is 5.0mm (.197"), the creep and space distances between the contacts are large enough to meet stringent safety requirements. * Easy contact insertion The contacts can be inserted into the housing easily and smoothly. * Box-shaped contact The box-shaped contact used successfully in the VH and NH connectors is also used in the XL connectors. This contact is adaptable to a wide range of applications, from low-voltage, low-current signal circuits to power supply circuits. * Two kinds of connections The XL connectors can be used for wire-to-wire connection and for printed circuit board connection. Specifications ------------------- JS T The reliable XL connectors have been developed by utilizing the technology of JST's field proven VH and SM connectors. The XL connectors are being used in electric appliances, vending machines, and office automation equipment. * Current rating: 10A AC, DC (Refer to the table below.) * Voltage rating: 150V AC, DC * Temperature range: -25C to +90C (including temperature rise in applying electrical current) * Contact resistance: Initial value/7m max. After environmental testing/10m max. * Insulation resistance: 1,000M min. * Withstanding voltage: 1,500V AC/minute * Applicable wire: AWG #26 to #16 * Applicable PC board thickness: 1.6mm(.063") * Contact JST if Lead-Free product is required. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. Note: The rated current varies depending on the number of circuits and the size of the wire to be connected by crimping. Current unit:A Circuits 2 3 4 8 12 16 #16 10 9 9 6 6 5 #18 6 5 5 4 4 3 Wire size(AWG) #20 #22 5 4 4 3 4 3 3 3 3 3 2 2 #24 3 3 3 2 2 1 #26 3 2 2 2 2 1 Note: Do not branch in parallel current which exceeds the rated current per circuit listed below. (Example: more than 10A in the case of a 2-circuit connector using AWG #16 wires.) If branched in parallel, current imbalance or other problems may develop. Standards ---------------------- 0 Recognized E60389 1 2 Certified LR20812 R75150 224 XL CONNECTOR Contact ----------------------------------------------------------------- Applicable wire Model No. SXF-01T-P0.7 4.0(.157) 12.0(.472) SXF-41T-P0.7 Insulation O.D. mm(in.) mm2 AWG # 0.13 to 0.5 26 to 20 1.3 to 2.7(.051 to .106) 0.5 to 1.25 20 to 16 1.9 to 3.1(.075 to .122) 0.3X2 to 0.5X2 22X2 to 20X2 1.7X2 to 2.0X2(.067X2 to .079X2) Q't y / reel 3,000 Material and Finish Phosphor bronze, tin-plated 3.35 (.132) 3.0 (.118) Housing ----------------------------------------------------------------- (4, 8, 12 or 16 circuits) 16.2(.638) 11.8(.465) 3.9(.154) 6.5(.256) 17.7(.697) 3.9(.154) 12.35(.486) 18.7(.736) 18.7(.736) 4.3 (.169) B 18.7(.736) 5.5(.217) 17.7(.697) 3.9(.154) 12.35(.486) 5.5(.217) 6.2(.244) (3 circuits) 5.5(.217) (2 circuits) 2.55 4.35 (.100) (.171) 5.8(.228) 10.9(.429) 5.0(.197) 5.1(.201) 10.0(.394) Circuits 2.55 4.35 (.100) (.171) 5.0(.197) A 5.8(.228) 10.9(.429) Dimensions mm(in.) Model No. A B Q'ty / bag 2 XLP-02V - - 500 3 XLP-03V - - 500 4 XLP-04V 5.0( .197) 11.2( .441) 500 8 XLP-08V 15.0( .591) 21.2( .835) 500 12 XLP-12V 25.0( .984) 31.2(1.228) 200 16 XLP-16V 35.0(1.378) 41.2(1.622) 200 Material Nylon 66, UL94V-0, natural (white) <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. XLP-02V-oo(blank)...natural (white) K...black R...red E...blue Y...yellow 225 XL CONNECTOR 8 6 12 8 16 3 7 5 11 7 15 3 2 6 4 10 6 14 2 1 5 3 9 5 13 2 8 4 12 1 7 3 11 JST JST 1 JST 4 2 JST 1 JST JST Contact position location numbers------------------------------------------- 2 4 2 10 1 3 1 9 Locking header ----------------------------------------------------------- 15.4(.606) 0.64 (.025) 5.0 (.197) 14.6(.575) 3.4(.134) 8.0(.315) 14.6(.575) 17.8(.701) 1.85(.073) Dimensions mm(in.) Circuits Model No. 2 B02P-XL - 5.0( .197) 250 4 B04P-XL 5.0( .197) 10.0( .394) 200 8 B08P-XL 15.0( .591) 20.0( .787) 100 12 B12P-XL 25.0( .984) 30.0(1.181) 50 16 B16P-XL 35.0(1.378) 40.0(1.575) 50 A B Q'ty / box Material and Finish Post: Brass, copper-undercoated, tin/lead-plated Wafer: Nylon 66, UL94V-0, natural (white) 6.62 (.261) 5.8 (.228) <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. A B ex. B02P-XL-oo(blank)...natural (white) K...black R...red E...blue Y...yellow Locking header PC board layout (viewed from soldering side) and Assembly layout ----- 17.7(.697) 20.1(.791) 5.8 0.05 (.228 .002 ) [6.6(.260)] 5.0 0.05 3.0 (.197 .002 ) (.118)min. 1.5 0.05 (.059 .002) dia. Note: 1. Tolerances are non-cumulative: 0.05mm(.002") for all centers. 2. Hole dimensions differ according to the kind of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details. 226 XL CONNECTOR Shrouded header <HDB type> ----------------------------------------------- Side entry type Top entry type (2 circuits) 1 7.9(.311) 1.2(.047) (2 circuits) 2 24.0(.945) 13.8(.543) 15.3(.602) 2.4(.094)dia. 0.64(.025) 3.2(.126)dia. 6.6(.260) 5.8 (.228) 0.64(.025) 5.8(.228) (3 circuits) 1 2 3.2 (.126) 3.0 (.118) 3.2 (.126) 14.6(.575) 14.5 (.571) 7.9(.311) 3.2 (.126)dia. 8.0(.315) 14.6(.575) 16.4(.646) 3.95 5.0 (.156) (.197) 12.9(.508) 1.2(.047) 3 2 1 (4 circuits) 0.64(.025) (4 circuits) 2.4(.094)dia. 0.64(.025) 5.8 (.228) 1 2 3 4 12.9(.508) 13.8(.543) 1 2 3 4 3.2 (.126) 3.2 (.126) 3.2 (.126)dia. 3.0(.118) 15.3(.602) 1.2(.047) 4.8 (.189) 5.0 (.197) 14.5 (.571) 3.0 (.118) 24.0(.945) 3.2 (.126)dia. Circuits Model No. Q'ty / box 2 S02P-XL-HDB 100 4 S04P-XL-HDB 100 14.6(.575) Material and Finish Post: Brass, copper-undercoated, tin/lead-plated Wafer: Nylon 66, UL94V-0, natural (white) 3.0 (.118) <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. 3.2 (.126)dia. 6.6(.260) 1.2(.047) 0.64(.025) 5.8 (.228) 5.0 (.197) ex. Circuits Model No. Q'ty / box 2 B02P-XL-HDB 200 3 B03P-XL-HDB 200 4 B04P-XL-HDB 200 B02P-XL-HDB-oo-, S02P-XL-HDB-oo-, (blank)...natural (white) K...black R...red E...blue Y...yellow Material and Finish Post: Brass, copper-undercoated, tin/lead-plated Wafer: Nylon 66, UL94V-0, natural (white) 227 XL CONNECTOR Shrouded header <HDS type> ----------------------------------------------- Side entry type 14.6(.575) 3.0(.118) 5.0 (.197) 3.2 (.126) 8 15.3(.602) 5 5.8 (.228) 4 0.64 (.025) 1 13.8(.543) Top entry type 1.2(.047) B 24.0(.945) A 3.15 (.124) 5.0 (.197) 0.64 5.8 (.025) (.228) B 1.2(.047) A Circuits Model No. Dimensions mm(in.) A B Q'ty / box Circuits Model No. Dimensions mm(in.) A B Q'ty / box 2 B02P-XL-HDS -- 7.9( .311) 200 8 S08P-XL-HDS 15.0( .591) 22.9( .902) 40 4 B04P-XL-HDS 5.0( .197) 12.9( .508) 200 12 S12P-XL-HDS 25.0( .984) 32.9(1.295) 30 16 S16P-XL-HDS 35.0(1.378) 42.9(1.689) 20 8 B08P-XL-HDS 15.0( .591) 22.9( .902) 100 12 B12P-XL-HDS 25.0( .984) 32.9(1.295) 50 16 B16P-XL-HDS 35.0(1.378) 42.9(1.689) 40 Material and Finish Post: Brass, copper-undercoated, tin/lead-plated Wafer: Nylon 66, UL94V-0, natural (white) <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. 228 B08P-XL-HDS-oo-, S08P-XL-HDS-oo-, (blank)...natural (white) K...black R...red E...blue Y...yellow Material and Finish Post: Brass, copper-undercoated, tin/lead-plated Wafer: Nylon 66, UL94V-0, natural (white) XL CONNECTOR Shrouded header PC board layout (viewed from component side) --------------------- [HDB type] Top entry type Side entry type (2 circuits) 2---1.5 0.05 (.059 .002)dia. 2.5 0.05(.098 .002)dia. (2 circuits) 6.6 0.05 (.260 .002) 5.8 0.05 (.228 .002) 2---1.5 0.05 (.059 .002)dia. 2.5 0.05(.098 .002)dia. 10.3 0.1 (.406 .004) 5.8 0.05 (.228 .002) (3 circuits) 3.0 0.05 (.118 .002) 5.0 0.05 5.0 0.05 4.8 0.05 (.197 .002) (.197 .002) (.189 .002) 3---1.5 0.05 (.059 .002)dia. 2.5 0.05(.098.002)dia. (4 circuits) 4---1.5 0.05 (.059 .002)dia. 2.5 0.05(.098 .002)dia. 10.3 0.1 (.406 .004) 5.0 0.05 (.197 .002) 2.5 0.05(.098 .002)dia. 6.6 0.05 (.260 .002) 5.0 0.05 (.197 .002) 4---1.5 0.05 (.059 .002)dia. (4 circuits) 5.8 0.05 (.228 .002) 5.8 0.05 (.228 .002) [HDS type] Top entry type Side entry type 5.0 0.05 5.0 0.05 (.197 .002) (.197 .002) 1.5 0.05 (.059 .002)dia. 5.8 0.05 (.228 .002) 1.5 0.05 (.059 .002)dia. 5.8 0.05 (.228 .002) 5.0 0.05 (.197 .002) Note: 1. Tolerances are non-cumulative: 0.05mm (.002") for all centers. 2. Hole dimensions differ according to the kind of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details. Applicator for the semi-automatic press AP-K2N ------------------------------- Contact SXF-01T-P0.7 SXF-41T-P0.7 Crimp applicator MKS-L with safety cover without safety cover Compact crimp applicator MKS-LS with safety cover without safety cover Strip-crimp applicator MKS-SC with safety cover APLMK SXF01-07 APLNC SXF01-07 - - - APLMK SXF41-07 APLNC SXF41-07 - - - 229