SMBJ TransilTM Datasheet - production data Description A K The SMBJ Transil series has been designed to protect sensitive equipment against electrostatic discharges according to IEC 61000-4-2, and MIL STD 883, method 3015, and electrical over stress according to IEC 61000-4-4 and 5. These devices are more generally used against surges below 600 W (10/1000 s). A K Planar technology makes these devices suitable for high-end equipment and SMPS where low leakage current and high junction temperature are required to provide reliability and stability over time. Unidirectional Bidirectional SMB (JEDEC DO-214AA) SMBJ are packaged in SMB (SMB footprint in accordance with IPC 7531 standard). Features Peak pulse power: 600 W (10/1000 s) 4 kW (8/20 s) Stand-off voltage range: from 5 V to 188 V Unidirectional and bidirectional types Low leakage current: 0.2 A at 25 C 1 A at 85 C Operating Tj max: 150 C High power capability at Tj max: 515 W (10/1000 s) JEDEC registered package outline TransilTM is a trademark of STMicroelectronics. Complies with the following standards IEC 61000-4-2 level 4: 15 kV (air discharge) 8 kV (contact discharge) IEC 61000-4-5 MIL STD 883G, method 3015-7: class 3B: 25 kV HBM (human body model) Resin meets UL 94, V0 MIL-STD-750, method 2026 soldererability EIA STD RS-481 and IEC 60286-3 packing IPC 7531 footprint January 2018 DocID5616 Rev 11 This is information on a product in full production. 1/11 www.st.com Characteristics 1 SMBJ Characteristics Table 1: Absolute maximum ratings (Tamb = 25 C) Symbol PPP Parameter Tj initial = Tamb Unit 600 W Operating junction temperature range -55 to +150 C Tstg Storage temperature range -65 to +150 C TL Maximum lead temperature for soldering during 10 s 260 C Value Unit Tj Peak pulse power dissipation Value Table 2: Thermal resistance Symbol Parameter Rth(j-l) Junction to leads 20 C/W Rth(j-a) Junction to ambient on printed circuit on recommended pad layout 100 C/W Figure 1: Electrical characteristics - parameter definitions Figure 2: Pulse definition for electrical characteristics 2/11 DocID5616 Rev 11 SMBJ Characteristics Table 3: Electrical characteristics parameter values (Tamb = 25 C, unless otherwise specified) VBR at IR(1) IRM max at VRM 10 / 1000 s VCL Order code 25 C 85 C A Min. V Typ. V IPP Max. mA T(2) 8 / 20s RD VCL Max. Max. IPP RD Max. V(3) A(4) V A SMBJ5.A/CA 20 50 5.0 6.40 6.74 10 9.2 68 0.031 14.4 275 0.027 5.7 SMBJ6.0A/CA 20 50 6.0 6.70 7.05 10 10.3 61 0.048 14.8 270 0.027 5.9 SMBJ6.5A/CA 20 50 6.5 7.20 7.58 10 11.2 56 0.058 15.2 266 0.027 6.1 SMBJ8.5A/CA 20 50 8.5 9.40 9.90 1 14.4 41.7 0.096 19.5 205 0.044 7.3 SMBJ10A/CA 0.2 1 10 11.1 11.7 1 17 37 0.127 21.7 184 0.051 7.8 SMBJ12A/CA 0.2 1 12 13.3 14.0 1 19.9 31 0.168 25.3 157 0.068 8.3 SMBJ13A/CA 0.2 1 13 14.4 15.2 1 21.5 29 0.191 27.2 147 0.076 8.4 SMBJ15A/CA 0.2 1 15 16.7 17.6 1 24.4 25.1 0.236 32.5 123 0.114 8.8 SMBJ16A/CA 0.2 1 16 17.8 18.7 1 26 23.1 0.276 34.4 116 0.127 8.8 SMBJ18A/CA 0.2 1 18 20.0 21.1 1 29.2 21.5 0.328 39.3 102 0.168 9.2 SMBJ20A/CA 0.2 1 20 22.2 23.4 1 32.4 19.4 0.404 42.8 93 0.196 9.4 SMBJ22A/CA 0.2 1 22 24.4 25.7 1 35.5 17.7 0.481 48.3 83 0.257 9.6 SMBJ24A/CA 0.2 1 24 26.7 28.1 1 38.9 16 0.587 50 80 0.256 9.6 SMBJ26A/CA 0.2 1 26 28.9 30.4 1 42.1 14.9 0.683 53.5 75 0.288 9.7 SMBJ28A/CA 0.2 1 28 31.1 32.7 1 45.4 13.8 0.802 59 68 0.363 9.8 SMBJ30A/CA 0.2 1 30 33.3 35.1 1 48.4 13 0.888 64.3 62 0.443 9.9 SMBJ33A/CA 0.2 1 33 36.7 38.6 1 53.3 11.8 1.08 69.7 57 0.512 10.0 SMBJ36A/CA 0.2 1 36 40.0 42.1 1 58.1 10.3 1.35 76 52 0.611 10.0 SMBJ40A/CA 0.2 1 40 44.4 46.7 1 64.5 9.7 1.59 84 48 0.728 10.1 SMBJ48A/CA 0.2 1 48 53.3 56.1 1 77.4 8.1 2.28 100 40 1.03 10.3 SMBJ58A/CA 0.2 1 58 64.4 67.8 1 93.6 6.7 3.34 121 33 1.51 10.4 SMBJ70A/CA 0.2 1 70 77.8 81.9 1 113 5.5 4.91 146 27 2.22 10.5 SMBJ85A/CA 0.2 1 85 94 99 1 137 4.6 7.18 178 22.5 3.29 10.6 SMBJ100A/CA 0.2 1 100 111 117 1 162 3.8 10.3 212 19 4.69 10.7 SMBJ130A/CA 0.2 1 130 144 152 1 209 3 16.5 265 15 7.03 10.8 SMBJ154A/CA 0.2 1 154 171 180 1 246 2.4 23.8 317 12.6 10.2 10.8 SMBJ170A/CA 0.2 1 170 189 199 1 275 2.2 30.0 353 11.3 12.7 10.8 SMBJ188A/CA 0.2 1 188 209 220 1 328 2 48.5 388 10.3 15.2 10.8 Notes: (1)Pulse (2)To (3)To 104/C test: tp < 50 ms calculate VBR or VCL versus junction temperature, use the following formulas: VBR at TJ = VBR at 25 C x (1 + T x (TJ - 25)) VCL at TJ = VCL at 25 C x (1 + T x (TJ-25)) calculate maximum clamping voltage at other surge level, use the following formula: VCLmax = VBR max + RD x IPPappli where IPPappli is the surge current in the application DocID5616 Rev 11 3/11 Characteristics (4)Surge 1.1 SMBJ capability given for both directions for unidirectional and bidirectional types. Characteristics (curves) Figure 3: Peak pulse power dissipation versus initial junction temperature 700 Figure 4: Peak pulse power versus exponential pulse duration (Tamb = 25 C) Ppp (W) 100.0 PPP(kW) Tj initial = 25 C 600 500 10.0 400 300 1.0 200 100 t P(ms) Tj (C) 0.1 1.0E-03 0 0 25 50 75 100 125 150 175 1.0E-02 1.0E-01 1.0E+00 1.0E+01 Figure 5: Clamping voltage versus peak pulse current (exponential waveform, maximum values) I PP( A ) 1000.0 T j initial=25 C 100.0 10.0 8/20 s S M BJ188A SM B J85A SM B J40A S M B J12A S M B J5.0A 1.0 SM B J24A 10/1000 s 10 ms V CL(V) 0.1 1 4/11 10 DocID5616 Rev 11 100 1000 SMBJ Characteristics Figure 6: Junction capacitance versus reverse applied voltage (typical values) (SMBJxxA) Figure 7: Junction capacitance versus reverse applied voltage (typical values) (SMBJxxCA) C(pF) 10000 10000 C(pF) F=1 MHz Vosc=30 mVRMS Tj=25 C F=1 MHz Vosc=30 mVRMS Tj=25 C SMBJ5.0CA SMBJ5.0A 1000 1000 SMBJ12CA SMBJ12A SMBJ24CA SMBJ40CA SMBJ24A 100 SMBJ40A 100 SMBJ85CA SMBJ85A VR(V) SMBJ188CA VR(V) SMBJ188A 10 10 1 10 100 Figure 8: Peak forward voltage drop versus peak forward current (typical values) 1.0E+02 1 1000 IFM(A) 10 100 1000 Figure 9: Relative variation of thermal impedance junction to ambient versus pulse duration 1.00 Zth(j-a) / Rth(j-a) Recommended pad layout PCB FR4, copper thickness = 35 m 1.0E+01 Tj =125 C Tj =25 C 1.0E+00 0.10 1.0E-01 VFM(V) 1.0E-02 0.0 0.5 1.0 1.5 2.0 2.5 3.0 0.01 1.0E-03 Figure 10: Thermal resistance junction to ambient versus copper surface under each lead (printed circuit board FR4, eCu = 35 m) t P(s) 1.0E-02 1.0E-01 1.0E+00 1.0E+01 1.0E+02 1.0E+03 Figure 11: Leakage current versus junction temperature (typical values) IR (nA) Rth(j-a) (C/W) 1.E+03 110 100 VR =VRM VRM < 10 V (printed ci rc uit boa rd FR4, copper thic knes s = 35 m) 90 1.E+02 80 70 1.E+01 60 50 40 VR =VRM VRM 10 V 1.E+00 30 20 Tj ( C) 10 0 0.0 SCu(cm) 1.E-01 25 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 50 75 100 125 5.0 DocID5616 Rev 11 5/11 150 Package information 2 SMBJ Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark. 2.1 Case: JEDEC DO214-AA molded plastic over planar junction Terminals: solder plated, solderable per MIL-STD-750, method 2026 Polarity: for unidirectional types the band indicates cathode. Flammability: epoxy is rated UL94V-0 RoHS package SMB package information Figure 12: SMB package outline 6/11 DocID5616 Rev 11 Package information SMBJ Table 4: SMB package mechanical data Dimensions Ref. Millimeters Inches Min. Max. Min. Max. A1 1.90 2.45 0.0748 0.0965 A2 0.05 0.20 0.0020 0.0079 b 1.95 2.20 0.0768 0.0867 c 0.15 0.40 0.0059 0.0157 D 3.30 3.95 0.1299 0.1556 E 5.10 5.60 0.2008 0.2205 E1 4.05 4.60 0.1594 0.1811 L 0.75 1.50 0.0295 0.0591 Figure 13: SMB recommended footprint 1.62 0.064 2.60 (0.102) Figure 14: Marking layout 1.62 0.064 Cathode bar (unidirectional devices only ) e 2.18 (0.086) x x x z y ww 5.84 (0.230) e: ECOPACK compliance XXX: Marking Z: Manufacturing location Y: Year WW: Week millimeters (inches) Note: Marking layout can vary according to assembly location. DocID5616 Rev 11 7/11 Ordering information 3 SMBJ Ordering information Figure 15: Ordering information scheme SM B J 85 CA - TR Surface mount Peak pulse power B = 600 W Transil in SMB Stand-off voltage 85 = 85 V Types CA = Bidirectional A = Unidirectional Delivery mode TR = Tape and reel Table 5: Ordering information Order code(1) SMBJxxxA/CA-TR(2) Marking Package Weight Base qty. Delivery mode See Table 6: "Marking". SMB 0.11 g 2500 Tape and reel Notes: (1)xx indicates stand-off voltage (2)Where xxx is nominal value of VBR and A or CA indicates unidirectional or bidirectional version. See Table 3: "Electrical characteristics parameter values (Tamb = 25 C, unless otherwise specified)" for list of available devices and their order codes 8/11 DocID5616 Rev 11 Ordering information SMBJ Table 6: Marking Order code Marking Order code Marking SMBJ5.0A BUZ SMBJ5.0CA BBZ SMBJ6.0A BUA SMBJ6.0CA BBA SMBJ6.5A BUB SMBJ6.5CA BBB SMBJ8.5A BUC SMBJ8.5CA BBC SMBJ10A BUD SMBJ10CA BBD SMBJ12A BUE SMBJ12CA BBE SMBJ13A BUF SMBJ13CA BBF SMBJ15A BUG SMBJ15CA BBG SMBJ16A CUG SMBJ16CA CBG SMBJ18A BUH SMBJ18CA BBH SMBJ20A BUI SMBJ20CA BBI SMBJ22A BVA SMBJ22CA CBH SMBJ24A BUJ SMBJ24CA BBJ SMBJ26A BUK SMBJ26CA BBK SMBJ28A BUL SMBJ28CA BBL SMBJ30A BUM SMBJ30CA BBM SMBJ33A BUN SMBJ33CA BBN SMBJ36A CUN SMBJ36CA CBN SMBJ40A CUJ SMBJ40CA CBJ SMBJ43A CUW SMBJ43CA CBW SMBJ48A BUW SMBJ48CA BBW SMBJ58A BUO SMBJ58CA BBO SMBJ70A CUM SMBJ70CA CBM SMBJ85A BUQ SMBJ85CA BBQ SMBJ100A CUQ SMBJ100CA CBQ SMBJ130A BUS SMBJ130A BBS SMBJ154A BUT SMBJ154A BBT SMBJ170A BUU SMBJ170A BBU SMBJ188A BUV SMBJ188A BBV DocID5616 Rev 11 9/11 Revision history 4 SMBJ Revision history Table 7: Document revision history 10/11 Date Revision Changes Oct-2001 4 Previous issue. 10-Feb-2005 5 Reformatted to current template. Added directional (uni and bi) indications to graphics. Added ECOPACK statement. 16-Nov-2006 6 Add part numbers SMBJ36A-TR and SMBJ36CA-TR in Table 3. 14-May-2009 7 Reformatted to current standards. Updated ECOPACK statement. Added part number SMBJ43CA/A. 17-Sep-2009 8 Document updated for low leakage current. 09-Jul-2010 9 Changed timescale in Figure 9. 20-Oct-2010 10 Updated Figure 13. 24-Jan-2018 11 Updated Table 3: "Electrical characteristics parameter values (Tamb = 25 C, unless otherwise specified)". DocID5616 Rev 11 SMBJ IMPORTANT NOTICE - PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST's terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers' products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. (c) 2018 STMicroelectronics - All rights reserved DocID5616 Rev 11 11/11