APEM www.apem.com D-49
D
2600 series
Illuminated and non-illuminated rocker switches
Distinctive features and specifications
ELECTRICAL SPECIFICATIONS
• Max. current/voltage rating with resistive load and approved ratings : see table below.
• Initial contact resistance : 10mΩmax. at 1A 2VDC
• Insulation resistance : 1.000 MΩmin. at 500VDC
• Dielectric strength : 2.500 Vrms 50 Hz min. between terminals
3.000 Vrms 50 Hz min. between terminals and metal panel
• Electrical life : 10.000 cycles at full load
❑ Three rocker shapes : plain, V-shaped or concave
❑ Various rocker colours
❑ Frame with protection guard on 2600LP models
❑ UL, CSA, VDE and NF (EN 61058-1) approved
FUNCTIONS
ON - OFF
ON - ON
1/6 HP 125VAC
16A 125VAC
16A 250VAC
1/3 HP 250VAC
1/6 HP 125VAC
16A 125VAC
16A 250VAC
1/3 HP 250VAC
10(4)A 250VAC
T 85/55
ON - OFF - ON
10A 125VAC
10A 250VAC
1/6 HP 125/250VAC
10A 125VAC
10A 250VAC
1/6 HP 125/250VAC
L I option
10(4)A 250VAC
OTHERS
10A 125VAC
10A 250VAC
1/6 HP 250VAC
-L I option
10(4)A 250VAC
APPROVED RATINGS DIRECT CURRENT
24 VDC 12 VDC
10A 15A
8A 10A
CSA UL VDE
CSA 22-2 UL 1054 EN 61058-1
-
L I option
10(4)A 250VAC
ON - ON - ON - - - 5A 8A
8A 10A
-
L I option
10(4)A 250VAC
NF
EN 61058-1
Models for peak currents
Models 2600SLH with silver cadmium oxide contacts
are discontinued. They will be replaced by switches
with silver tin oxide contacts.
MATERIALS
• Case : melamine/polyester
• Frame : polyamide
• Actuator : polyamide
• Contacts :
A: silver
C: copper, silver plated
GENERAL SPECIFICATIONS
• Panel thickness : 0,8 mm to 4 mm (.031 to .157)
• Operating temperature :
- silver contacts (A) : -20°C to +125°C
- silver plated contacts (C) : -10°C to +55°C
AGENCY APPROVALS
Availability : consult factory for details of approved models.
Marking : approved models are standard marked.
EN 61058-1
EN 61058-1
D-50 APEM www.apem.com
2600 series
Illuminated and non-illuminated rocker switches
Overview
D
26
Number of poles
3Single pole
4Double pole
SERIES Frame type
LH Plain
LP With protection guard
Terminals
(none) Screw + clamp
/2 Solder lugs
/quick-connect
/3 Normalized
quick-connect
Special contact
(none) Standard
SFor peak currents
up to 150A
Electrical functions
1ON - OFF
4ON ON ON▲
5MOM - ON▲
6ON - ON
7MOM OFF MOM▲
8ON OFF MOM▲
9ON OFF ON
▲double pole only
ABOUT THIS SERIES
On the following pages, you will find successively :
- model structure of switches
- options in the same order as in above chart
Dimensions : first dimensions are in mm while inches are shown as bracketted numbers.
NOTICE : please note that not all combinations of above numbers are available.
Refer to the following pages for further information.
Sealing boot U2150 available to protect the switches against dust and water. See section H.
APEM www.apem.com D-51
2600 series
Illuminated and non-illuminated rocker switches
Overview
D
Packaging unit : 20 pieces per type and colour.
Frame colours
1blue
1/4 dark blue
2black (standard)
4grey
7/1 white
8chrome plated
Blight brown
Edark brown
Rocker marking
Black White
00 00 (none)
01 21 O—
07 27 OI
08 28 ON OFF
Complete table at the end of
the series.
Lamps
L0 Without lamp
L6V 6V filament lamp
L12V 12V filament lamp
L24V 24V filament lamp
L110V 110VAC neon lamp
L110V1 110VAC blue fuor. lamp
L110V3 110VAC green fuor. lamp
L220V 220VAC neon lamp
L220V1 220VAC blue fuor. lamp
L220V3 220VAC green fuor. lamp
L380V 380VAC neon lamp
L380V1 380VAC blue fuor. lamp
L380V3 380VAC green fuor. lamp
L I option
L I EN 61058-1 approved
version, without lamp
(3 position switches)
Rocker shapes
1Plain
2V-shaped
3Concave
Rocker colours
Illuminated rocker (without
window)
0Without rocker
1blue
3green
5yellow
6red
7/1 white
9orange
With green or blue rocker,
use fluorescent lamp only.
Non-illuminated rocker or
rocker with illum. window•
0Without rocker
02 light brown
04 dark brown
03 beige
10 blue
14 dark blue
20 black •
30 green •
40 grey
50 yellow
60 red •
70 white
90 orange
Contact materials
ASilver
Silver cadmium oxide (if
combined with S)
CCopper, silver plated
Illuminated
window
/3 green
/6 red
With green, use
fluorescent lamp
only.
D-52 APEM www.apem.com
D
2600 series
Illuminated and non-illuminated rocker switches
2600LP - with protection guard - single pole
2600LH - double pole
2600LH - single pole
III II I
A2-A1 A2-A3
B5-B4 B5-B6
Screw term. Solder lug/
+ clamp quick-connect
2631LH 2631LH/2 ON - OFF
2636LH 2636LH/2 ON - ON
2639LH 2639LH/2 ON OFF ON
III II I
A2-A1 A2-A3
B5-B4 B5-B6
Screw term. Solder lug/
+ clamp quick-connect
2641LH 2641LH/2 ON - OFF
2644LH* 2644LH/2* ON ON ON
2645LH 2645LH/2 MOM - ON
2646LH 2646LH/2 ON - ON
2647LH 2647LH/2 MOM OFF MOM
2648LH 2648LH/2 ON OFF MOM
2649LH 2649LH/2 ON OFF ON
III II I
A2-A1 A2-A3
B5-B4 B5-B6
Screw term. Solder lug/
+ clamp quick-connect
2631LP 2631LP/2 ON - OFF
2636LP 2636LP/2 ON - ON
2639LP 2639LP/2 ON OFF ON
MODEL
STRUCTURE
• Model 2600LP with protection guard
•1 and 2 pole configurations
* Function 4 : SP in DP case, see end of catalogue.
123
IIIIII
(.031)
(.118DIAx0.50 IS)
Ø3.00x0.50 SI
0.80
6.35
(.25)
(.122DIA)
Ø3.10
4.50
(.177)
(.25x.031)
6.35x0.80
14.70
(.578)
A3
A2
2.00
(.078)
6.80
(.267)
11.00
(.433)
A1
9.00
(.354) 17.00
(.669)
6.35x0.80
(.25x.031)
11.10
(.437)
32.00
25.00
(.984)
25.00
(.984)
(1.259)
18.50
(.728)
(.578)
14.70
A2
A3 B6
B5
6.80
(.078)
2.00
(.267)
(.984)
25.00
(.433)
11.00
A1 B4
(.354)
9.00 (.669)
17.00 (.437)
11.10
(.25x.031)
6.35x0.80
(.728)
18.50
(.984)
25.00
(1.259)
32.00
A3
(.078)
2.00
(.267)
6.80
(.984)
25.00
(.393)
10.00
(.433)
11.00
A1
A2
(.25x.031)
6.35x0.80
(.437)
11.10
(.669)
17.00
(.578)
14.70
32.00
(.984)
25.00
(.728)
18.50
(1.259)
2640LH 2640LH/2
APEM www.apem.com D-53
D
2600 series
Illuminated and non-illuminated rocker switches
2600LP - with protection guard - double pole
III II I
A2-A1 A2-A3
B5-B4 B5-B6
Screw term. Solder lug/
+ clamp quick-connect
2641LP 2641LP/2 ON - OFF
2644LP* 2644LP/2* ON ON ON
2645LP 2645LP/2 MOM - ON
2646LP 2646LP/2 ON - ON
2647LP 2647LP/2 MOM OFF MOM
2648LP 2648LP/2 ON OFF MOM
2649LP 2649LP/2 ON OFF ON
PANEL CUT-OUT
* Function 4 : SP in DP case, see end of catalogue.
(.267) (.578)
6.80 14.70
(.433)
11.00 (.728)
(.984)
(1.259)
(.984)
(.437)(.669)
(.25x.031)
(.078)
17.00 11.10
2.00 25.00
6.35x0.80
32.00
25.00
18.50
(.393)
10.00
B4A1
A2
A3 B6
B5
(1.181)
(.866)
22.00
30.00
TERMINAL OPTION
/3 Normalized quick-connect terminals 6,35 x 0,8 (.250 x .031)
Specify after LH or LP.
ø1.50
(.059DIA)
6.35x0.80
(.250x.031)
D-54 APEM www.apem.com
D
2600 series
Illuminated and non-illuminated rocker switches
CONTACT MATERIALS
ASilver
CCopper, silver plated (available with functions 1, 6 and 9 only)
1Blue
1/4 Dark blue
2Black (standard)
4Grey
7/1 White
8Chrome plated
BLight brown
EDark brown
FRAME COLOURS
ROCKER SHAPES
This option has UL approval only.
12 3
Plain V-shaped Concave
APEM www.apem.com D-55
D
2600 series
Illuminated and non-illuminated rocker switches
ROCKER COLOURS
For illuminated switches
For non-illuminated switches or switches with illuminated window (•)
Without rocker Blue* Green* Yellow Red White Orange
Plain rocker P/N -U881 U883 U885 U886 U887 U889
U861 U863 U865 U866 U867 U869
U871 U873 U875 U876 U877 U879
1 3 5 6 7/1 9
-
-
0
V-shaped rocker P/N
Concave rocker P/N
Colour code
Plain rocker P/N
Without
rocker
-U1250B
U1250BF
U1250
U1251/4
U1252 U1253 U1254 U1255 U1256 U1257 U1259
-U1270B
U1270BF
U1270
U1271/4
U1272 U1273 U1274 U1275 U1276 U1277 U1279
-U1260B
U1260BF
U1260
U1261/4
U1262 U1263 U1264 U1265 U1266 U1267 U1269
002 04 03 14 20• 30• 40 50 60• 70 90
Light
brown Dark
brown Beige Dark
blue
U1251
U1271
U1261
10
Blue Black Green Grey Yellow Red White Orange
V-shaped rocker P/N
Concave rocker P/N
Colour code
Complete box with one of above colour codes.
To order rockers separately, use their P/N (U....) and complete box with code 0.
Rockers with illuminated windows (codes 20, 30, 60) : part numbers on request.
ROCKER MARKING
MARKING
COLOUR
Black 00
00
00
01
11
21
02
12
22
06
16
26
07
17
27
08
18
28
03
13
23
04
14
24
05
15*
25*
40
41
42
43*
44*
45*
46
47
48
Red
White
-
* With green or blue rocker, use fluorescent lamp only.
* Not available on V-shaped rockers
Special markings and marking on rockers with illuminated window : consult factory.
1
2
3
6
5
4
1
2
3
6
5
4
1
2
3
6
5
41
2
3
6
5
4
5
6
3
2
14
1
2
3
6
5
44
6
5
1
2
3
1
2
3
6
5
44
6
5
1
2
3
4
6
5
1
2
3
5
63
2
1
4
STOP
STOP
STOP
ON
OFF
D-56 APEM www.apem.com
D
2600 series
Illuminated and non-illuminated rocker switches
LAMP
L0 Non-illuminated switch
Filament lamp 6V
Filament lamp 12V
Filament lamp 24V
Neon lamp 110VAC
Green fluorescent lamp 110VAC
Neon lamp 220VAC
Green fluorescent lamp 220VAC
Neon lamp 380VAC
Green fluorescent lamp 380VAC
L6V
L12V
L24V
L110V
BLUE fluorescent lamp 110VAC
L110V1
L110V3
L220V
L220V3
BLUE fluorescent lamp 220VAC
L220V1
L380V
L380V3
BLUE fluorescent lamp 380VAC
L380V1
EN61058-1 approved version
without lamp (3 position switches)
L I
For illuminated models, the lamp is always
connected between center terminals 2 and 5.
BLUE fluorescent lamps.
Lamps L380V, L380V1 and L380V3 are not UL/CSA approved.
B4 B5
A1 A2
ILLUMINATED WINDOW
For black, green and red rockers only
/3 Green
/6 Red
With green, use fluorescent lamp only.
No marking available on illuminated windows.
ø5.00
(.197 DIA)
New!
