* Number of inser t contact or pins must be specified to complete par t number.
◊Available on special order only; contact Switchcraft for price and delivery.
1 Non-reflective gray finish, gold-plated pins.
Q-G®CORD PLUG CONNECTORS AND RECEPTACLES
Part Number Part Number Insert Contacts
◊T3F ◊T3FL 3
◊T3FM ◊T3FLM 3
◊T4F ◊T4FL 4
◊T4FM ◊T4FLM 4
T(*)F Straight female cord plug with DPDT (2-C) locking
on-off switch; standard latchlock.
T(*)FM Straight female cord plug with SPDT (1-C)
momentar y on-off switch; standard latchlock.
Slide switches rated 500 mA, 125V (AC or DC). Mounting
screws are supplied.
T(*)F AND T(*)FM CORD PLUG WITH ON-OFF SWITCH
D(*)M, D(*)F AND D(*)FD RECEPTACLES
Nickel Black Finish
Finish Silver Gold Detent QGP Series1Pins
D3M D3MB D3MBAU — QGP363 3
D4M D4MB D4MBAU — — 4
D5M D5MB D5MBAU — — 5
D6M D6MB D6MBAU — — 6
D7M D7MB D7MBAU — — 7
D3F D3FB D3FBAU D3FD QGP362 3
D4F D4FB D4FBAU ◊D3FDB — 4
D5F D5FB D5FBAU — — 5
D6F D6FB D6FBAU ◊D6FDB — 6
D7F D7FB D7FBAU — — 7
Q-G CORD PLUG CONNECTORS AND RECEPTACLES
Q-G CORD PLUG CONNECTORS AND RECEPTACLES
®
®
Studio quality black and gold Q-G®receptacle with black
housing and gold contacts is designed for low/stable contact
resistance and withstands corrosion where highest quality is
required for recording and broadcast studio equipment,
consoles, and other applications.
D(*)M SERIES – Male receptacle for panel or chassis
mounting. Special rectangular flange per mits close spacing on
crowded panels, has two .136" (3.45mm) diameter
countersunk holes for #5-40 flat head mounting screws (not
supplied). Mounts from front of panel or chassis in .766"
(19.45) diameter hole. Satin nickel finish (Series D*M) or black
finish (Series D*MB, or D*MBAU).
D(*)F SERIES – Female receptacle for panel or chassis
mounting. Flange has two .136" (3.45 mm) diameter
countersunk holes for #5-40 flat head mounting screws (not
supplied).Mounts from front of panel or chassis in .953" (24.21
mm) diameter hole.Series D(*)F has standard latchlock;Series
D(*)FD has FAS-DISCONNECT detent. Satin nickel finish
(Series D*F and D*FD) and “Black-Velvet” finish (Series
D*FBAU).
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
9
CONNECTORS & RECEPTACLES
FAX: 773 792-2129
CONNECTORS & RECEPTACLES
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
* Please visit the product pages on our website for the most up-to-date product information
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
121
JACKS AND PLUGS
FAX: 773 792-2129
JACKS AND PLUGS
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
SUBMINIATURE PHONE JACKS
SUBMINIATURE PHONE JACKS
SUBMINIATURE PHONE JACKS,TR2A AND TR1PC
Extremely small, rugged, shunted Micro-Jax®2-conductor jack is 1/4 the
size of a standard phone jack and weighs less than 1/20 ounce. Can be
wired for open or closed circuit operation. Internally keyed insulators
interlock all parts and tip springs grip mating plugs positively. Mates
with Switchcraft Micro-Plug®phone plugs. Jacks mount through
.190" diameter hole in chassis/panels up to .093" thick. For insulated
mounting, a .281" diameter hole and .050" maximum panel thickness
applies. Order insulating washer separately. Number
P1617
(flat phenolic washer) and Number P1618 (swedged fiber washer).
Number TR1PC:
2-conductor closed circuit jack with PC
terminals. Open frame and enclosed versions available. Mates with
Switchcraft®Micro Plug®numbers 850, 855, and 880.
SUBMINIATURE ENCLOSED PHONE JACKS
Micro-D Jax®2-conductor jacks have insulated box construction and
subminiature size.
Number MDPC2A:
2-conductor closed circuit jack with PC
terminals. Mounts to single-, double-sided or multilayer boards either
singly or in rows as close as .344" centers (+/- .01 inches). Bushing is
.10" inside diameter.
Number MDSL2A:
Same as MDPC2A except, 1. solder lugs, 2.
bushing is #10-48 threaded (nut and washer supplied), and 3. mount
ing centers are .35" or .313". When mounted on .313" centers, sleeves
or adjacent jacks may be in intimate contact. Mounts through a .203"
diameter hole in chassis/panels up to .063" thick.
SUBMINIATURE RIGHT-ANGLE PHONE JACKS
2-conductor jacks have molded housing which protects all internal
parts. Panel/chassis or PC boards mounting in rows, if desired, on
.351" centers. PC terminals need only .382" behind-panel clearance.
Number MDPC2ARA:
PC terminals mount/ter minate directly to PC
or multilayer boards. Bushing clears a .156" diameter panel hole.
Number MDSL2ARA:
Right-angle solder lugs and #10-48 threaded
bushing for chassis/panel mount. Mounts in .203" diameter hole in
chassis/panels up to .063" thick.
SPECIFICATIONS - MICRO-JAX ®ELECTRICAL:
Contact Resistance:
.10 ohms maximum (spring to plug).
Shunt Resistance:
.10 ohms maximum.
Dielectric Withstanding Voltage:
250 V AC .
Shunt T ension:
60 grams minimum.
MATERIAL:
Mounting Bushing:
Nickel-plated copper alloy.
Insulating Spacers:
Rigid plastic.
Springs:
Nickel-plated copper alloy. Integral contacts are plated.
Tip, Shunt and Sleeve Terminals:
Silver-plated copper alloy.
Hardware:
Supplied with one,
P15331
nickel-plated copper alloy
hex nut, and one
S29571
nickel-plated copper alloy flat washer.
MATERIAL - TR1PC
Threaded Bushing:
Nickel-plated copper alloy.
Tip Spring:
Copper alloy.
Sleeve/Ground Terminal:
Copper allo y tin-lead with nickel underplate.
MECHANICAL - TR1PC:
Life:
10,000 inser tion/withdrawal cycles, minimum.
Insertion/Withdrawal Forces:
11 ounces inser tion,
11 ounce minimum withdrawal.
ENVIRONMENTAL - TR1PC:
Thermal Range:
-55°C to +85°C (non-operating);
-20°C to +65°C (operating).
Thermal Shock:
Per MIL-STD-202, method 107.
Humidity:
Per MIL-STD-202, method 106.
Salt Spray:
Per MIL-STD-202, method 101.
SPECIFICATIONS - MICRO-D JAX
MECHANICAL:
Life:
10,000 inser tion/withdrawal cycles minimum.
Insertion/Withdrawal Forces:
11 ounce inser tion,
11 ounce minimum withdrawal.
ELECTRICAL:
Contact Resistance:
.010 ohms maximum (initial), .020 ohms
maximum (after humidity, durability exposure), .10 ohms
maximum (after salt spray).
Insulation Resistance:
10,000 MΩminimum (initial),
1,000 MΩminimum (after humidity, durability exposure).
Dielectric Withstanding Voltage:
500 V AC maximum.
Contact Rating:
.125 A, 125 V AC.
ENVIRONMENTAL:
Thermal Range:
-55°C to +85°C (non-operating);
-20°C to +65°C (operating).
Thermal Shock:
Per MIL-STD-202, method 107.
Humidity:
Per MIL-STD-202, method 106.
Salt Spray:
Per MIL-STD-202, method 101.
MATERIAL:
Housing:
Glass reinforced plastic.
Insulation:
Rigid plastic.
Mounting Bushing (Micro-D):
Nickel-plated copper alloy.
Mounting Bracket (Right-Angle Micro-D):
Nickel-plated copper alloy.
Tip Spring:
Silver-plated copper alloy.
Shunt T erminal:
Silver-plated copper alloy.
Sleeve T erminal (Micro-D):
Steel, tin-plated.
Sleeve Terminal (Right-Angle Micro-D):
Silver-plated
copper alloy.
Hardware (Micro-D):
Same as Micro-Jax (MDSL2A).
Hardware (Right-Angle Micro-D):
Hex nut, nickel-plated
copper alloy,
Number P15331
;flat washer, nickel-plated
copper alloy
S29571
;not supplied with MDPC2A.
All are 2-Conductor (closed circuit). Note 1.: See Jack Schematics page 79
and 80. Note 2.: See Plugs Section for mating infor mation.
.101" SUBMINIATURE PHONE JACKS
TR2A TR1PC MDPC2A MDSL2A MDSL2ARA MDPC2ARA
Part Jack Typical Part Jack Typical
No. Schem.1Mating Plug2No. Schem.1Mating Plug2
TR2A MDSL2A
TR1PC }III 850 MDPC2ARA }III 850
MDPC2A MDSL2ARA
* Please visit the product pages on our website for the most up-to-date product information
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
123
JACKS AND PLUGS
FAX: 773 792-2129
JACKS AND PLUGS
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
PHONO JACKS
PHONO JACKS
Part Number Description
BPJR01 Rear mount, black insulator
BPJR01AU Rear mount, black insulator, gold plated
BPJR02 Rear mount, red insulator
BPJR02AU Rear mount, red insulator, gold plated
BPJR03 Rear mount, white insulator
BPJR03AU Rear mount, white insulator, gold plated
BPJR04 Rear mount, yellow insulator
BPJR04AU Rear mount, yellow insulator, gold plated
BPJR05 Rear mount, blue insulator
BPJR05AU Rear mount, blue insulator, gold plated
BPJR06 Rear mount, green insulator
BPJR06AU Rear mount, green insulator, gold plated
3501F Rear mount, rigid plastic mounting flange
3501FR Rear mount, natural insulator
For insulated mounting, order S1028 and S1029 insulating washers
BPJF01 Front mount, black insulator
BPJF01AU Front mount, black insulator, gold plated
BPJF02 Front mount, red insulator
BPJF02AU Front mount, red insulator, gold plated
BPJF03 Front mount, white insulator
BPJF03AU Front mount, white insulator, gold plated
BPJF04 Front mount, yellow insulator
BPJF04AU Front mount, yellow insulator, gold plated
Part Number Description
BPJF05 Front mount, blue insulator
BPJF05AU Front mount, blue insulator, gold plated
BPJF06 Front mount, green insulator
BPJF06AU Front mount, green insulator, gold plated
3501FP Front Mount, natural insulator
3505F RF version, uses low-loss nylon insulation
For insulated mounting, order S2207 and S1564 insulating washers
BPJJ01 Feed through, black insulator
BPJJ01AU Feed through, black insulator, gold plated
BPJJ02 Feed through, red insulator
BPJJ02AU Feed through, red insulator, gold plated
BPJJ03 Feed through, white insulator
BPJJ03AU Feed through, white insulator, gold plated
BPJJ04 Feed through, yellow insulator
BPJJ04AU Feed through, yellow insulator, gold plated
BPJJ05 Feed through, blue insulator
BPJJ05AU Feed through, blue insulator, gold plated
BPJJ06 Feed through, green insulator
BPJJ06AU Feed through, green insulator, gold plated
3503 Extension jack, shielded handle
3514PC Ver tical PC mount, nickel plated steel bushing
3515PC Ver tical PC mount, ceramic bushing
3517PC Horizontal PC mount, nickel plated steel bushing
BULKHEAD PHONO JACKS
FEATURES AND BENEFITS
• Front or rear mount configurations
• Durable plated machined brass construction
• All mounting hardware is included
APPLICATIONS
• Audio
• Video
• General Purpose Electronics
OPTIONS
• Front or rear mount solder type receptacles
• Jack to jack bulkhead configuration
• Insulator colors
• Gold or nickel plating
SPECIFICATIONS
Material and Platings Housing:
Nickel or Gold-plated Brass
Contact: Nickel-plated Brass Insulator: ABS
Hardware: Nickel-plated Brass. Switchcraft introduces a
complete line of bulkheadmount phono (RCA) jac ks to meet the
most critical audio, audio/video, and general-purpose electronic
applications. These jacks are offered in front and rear mount
solder type as well as jack to jack bulkhead configurations.
These jacks are available with black, white, blue, green, red,
and yellow insulators and nickel or gold plated bodies. All
mounting hardware is included.
Housing: Nickel or gold plated, copper alloy
(3514PC, 3515PC, 3517PC: Nickel plated, steel)
Terminals: Nickel plated, copper alloy (3515PC:Tin plated,
copper alloy)
Bushing: Nickel-plated, copper alloy (3515PC: Ceramic)
Insulators: Thermoplastic
(3517PC: Ceramic and glass filled ther moplastic)
3517PC BPJR01 BPJF01 BPJJ01 3505F 3503
3501F 3501FP 3501FR 3514PC 3515PC
(See next page for drawings.)
* Please visit the product pages on our website for the most up-to-date product information
SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630
161
JACKS AND PLUGS
FAX: 773 792-2129
DIMENSIONS ARE FOR REFERENCE ONLY Inch
(mm)
PHONO PLUGS
PHONO PLUGS
PHONO PLUGS (continued)
Part Description Typical
Number Pin Handle Notes Mating Jack
3502A Nickel Nickel BP Series
3502AAU Gold Nickel BP Series
3502ABAU Gold Black BP Series
3502RA Nickel Nickel Right angle BP Series
3502RABAU Gold Black Right angle BP Series
3502RAAU Gold Nickel Right angle BP Series
35581 Nickel Plastic Red handle BP Series
35582 Nickel Plastic Black handle BP Series
35585 Nickel Plastic White handle BP Series
3502 Nickel Nickel BP Series
3501M Nickel BP Ser ies
3501MC Nickel Same as 3501M except with cable clamp BP Series
3504M Nickel Same as 3507 less cable clamp and handle 3505F
3507 Nickel Nickel For RF applications 3505F
330F1 Nickel 2 inline jacks to 1 male plug, 4" gray shielded cable BP Series
330F2 Nickel1 inline jack, 1 male plug to 1 male plug, 4" gray shielded cable BP Ser i es
3507
3502RA
3502A
3501M & 3504M
35581, 33582, 33585
3502
3501MC
JACKS AND PLUGS
* Please visit the product pages on our website for the most up-to-date product information
