PH CONNECTOR High box type 2.0 mm pitch/Disconnectable Crimp style connectors 9 Specifications PH CONNECTOR High box type* Current rating: 2 A AC/DC(AWG #24) 1 2 3 4 5 6 7 8 * Voltage rating: 100 V AC/DC * Temperature range: -25 to +85 (including temperature rise in applying electrical current) * Contact resistance: Initial value/ 10 m max. After environmental tests/ 20 m max. * Insulation resistance: 1,000 M min. * Withstanding voltage: 800 VAC/minute * Applicable wire: AWG #30 to #24 * Applicable PC board thickness: 0.8 to 1.6 mm PH connector high box type, with 17 mm mounting height and with 4.5 mm thickness. Signal side connector is common use with the normal PH connector, and it is compatible with insulation displacement type KR connector. *In using the products,refer to "Handling Precaution for Terminal and Connector" described on our website (Technical documents of Product information page). * Contact JST for details. *RoHS2 compliance Standards Recognized E60389 R75087 PC board layout and Assembly layout 4.5 0.1 0.1 1 0 1.5 0.05 (17) 0 0.8 15 0.05 2 0.05 1.4 Note: 1. The above figure is the figure viewed from the connector mounting side. 2. Tolerances are non-cumulative: 0.05 mm for all centers. 3. Hole dimensions differ according to the type of PC board and piercing method. If PC boards made of hard material are used, the hole dimensions should be larger. The hole dimensions shown above are reference values. Contact JST for details. PH1 Contact Applicable wire AWG # mm2 Model No. 5.7 2.85 SPH-002T-P0.5S 2.05 0.050.22 1 Insulation O.D. (mm) 3024 0.81.5 Q'ty/ reel 8,000 Material and Finish Phosphor bronze, tin-plated (reflow treatment) 2.08 RoHS2 compliance Contact 1.5 Crimping machine Crimp applicator SPH-002T-P0.5S AP-K2N MKS-L Applicator Dies MK/SPH-002-05S Note: Contact JST for fully automatic crimping applicator. 1 Crimp applicator with dies APLMK SPH002-05S PH CONNECTOR High box type PH2 Housing No. of circuits 2 3 Model No. PHR-2 PHR-3 PHR-4 PHR-5 PHR-6 PHR-7 PHR-8 PHR-9 PHR-10 PHR-11 PHR-12 PHR-13 Dimensions (mm) B A Q'ty/ box 2.0 5.8 1,000 4.0 7.8 1,000 6.0 9.8 1,000 8.0 11.8 1,000 10.0 13.8 1,000 12.0 15.8 1,000 14.0 17.8 1,000 16.0 19.8 1,000 18.0 21.8 1,000 20.0 23.8 1,000 22.0 25.8 1,000 24.0 27.8 1,000 PH CONNECTOR High box type 4 5 6 7 8 1.9 B 9 A 10 0.5 2 4.5 11 12 13 6.35 Material and Finish PA 66, UL94V-0, natural (white) 0.6 RoHS2 compliance <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. PHR-2-oo(blank)...natural (white) BK...black R...red TR...tomato red BL...blue Y...yellow L...lemon yellow M...green D...orange N...brown P...purple PK...pink H...gray LE...light blue FY...vivid yellow PHTall-type--3 Shrouded header No. of circuits 1 A 1.3 0.5 1.7 15 2 4.5 Model No. Dimensions (mm) A B Q'ty/ box 2 BH2B-PH 2.0 5.9 800 3 BH3B-PH 4.0 7.9 480 4 BH4B-PH 6.0 9.9 400 5 BH5B-PH 8.0 11.9 390 6 BH6B-PH 10.0 13.9 300 7 BH7B-PH 12.0 15.9 240 8 BH8B-PH 14.0 17.9 240 9 BH9B-PH 16.0 19.9 200 10 BH10B-PH 18.0 21.9 200 11 BH11B-PH 20.0 23.9 150 12 BH12B-PH 22.0 25.9 150 13 BH13B-PH 24.0 27.9 100 Material and Finish Post: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Wafer: PA 66, UL94V-0, natural (white) (3.6) 1.5 RoHS2 compliance This product displays (LF)(SN) on a label. 0.8 1.5 1.4 1.95 B 6 <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. BH2B-PH-oo(blank)...natural (white) K...black R...red E...blue Y...yellow M...green N...brown 2