1
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
About Amphenol® Aerospace
Your Source for Interconnect Products
CONTACT US:
Amphenol Aerospace
40-60 Delaware Avenue
Sidney, NY 13838-1395
Customer Service:
Mon - Fri 8AM - 5PM
Phone: (800) 678-0141
Fax: (607) 563-5157
Online: www.amphenol-aerospace.com
ABOUT AMPHENOL AEROSPACE:
Amphenol Aerospace, a Division of Amphenol Corporation, is one
of the largest manufacturers of interconnect products in the world for the Military,
Commercial Aerospace and Industrial markets. Amphenol designs, manufactures and
markets circular and rectangular, electronic, ber optic, EMI/EMP lter, and a variety of
special applications connectors and interconnect systems.
Our state-of-the-art facility is nestled at the foothills of the Catskill Mountains in Sidney,
NY. The Amphenol complex houses many technologies including CNC machining,
die-casting, molding, impact and extruding, plating, screw machining and process
controls. Our fully equipped material evaluation lab and engineering organization utilize
the latest in computer aided design software and analysis tools, allowing us to design,
test, and qualify advanced interconnect systems. Amphenol’s interconnect products are
supplied to thousands of OEMs worldwide and are supported by our worldwide sales
and engineering force, including the largest global network of electronic distributors.
Amphenol Aerospace, Amphenol Commercial Air,
and Amphenol Industrial Operations Main Facility in Sidney, NY USA
QUALITY ASSURANCE:
Amphenol Aerospace has been awarded
both AS9100 - Revision C and ISO9001:2008
Quality Assurance Certications.
Customer-Centric:
Our #1 priority is our customers who
deserve quality product on time.
CARE
Accountable:
Clear owners, clear
actions, clear results.
Reliable:
What we build
matters and quality
is imperative.
Enthusiastic:
Challenges create rewarding
opportunities. Enthusiasm is
contagious and we will spread it.
2Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
III
SJT
I
II
Access
Aquacon
MIL-DTL-
27599 Hermetics Contact Size
JT II LJT I TV III III JT/LJT
Solder
Crimp Class
H
Class
Y
TV* Service
Rating
Total
Contacts
23
HD
22D 22M 22 20 16 12 12
(Coax)
10
(Power)
8
(Coax)
8††
(Twinax)
8-2nPM 2 2
8-3nX NA P P M 3 3
9-3nX
9-5Hn Grounded 1 1
8-6X X P P M 6 6
9-6X X P P
9-7nXM 7 7
9-9nN 9 9
9-22nXI 2 2
8-35 X P P M 6 6
9-35 9-35 A35 X P P P
8-44 X P P M 4 4
9-44 X
9-94nuM 2 2
8-97nXM 4 2 2
8-98 S X P P I 3 3
9-98 9-98 A98 XXP P P
11-2H11-2HB2 X P** I 2 2
10-43I 4 4
11-411-4X2
10-5X X P P I 5 5
11-511-5B5XXP
11-6nSI 6 6
10-13 X X P/S P/S M 13 13
11-13 X X P/S P/S
11-19nN 19 19
10-35 X P/S P/S M 13 13
11-35 11-35 B35 X P/S P/S P
11-54nXuII 4 4
10-98 X X P/S P/S I 6 6
11-98 11-98 B98 XXP/S P/S P
10-99 X P P I 7 7
11-99 11-99 B99 XX P
12-3X X uP P II 3 3
13-3nP
12-4X X P P I 4 4
13-4H13-4HC4XXP P P
12-8X X P P I 8 8
13-813-8C8XXP P P
13-13nI, Fiber
Optic 4 2** 2
12-22 X P/S P/S M 22 22
13-22 X X P/S P/S
13-26n2 M 8 6 2
13-32nN 32 32
12-35 X P/S P/S M 22 22
13-35 13-35 C35 X P/S P/S P
13-63nul 4 2 2
12-98 X X P/S P/S I 10 10
13-98 13-98 C98 XXP/S P/S P
15-ATnXI13 10 3
14-4n2I 4 4
15-4n15-4n2u
14-5X X P P II 5 5
15-5H15-5HD5XXP P P
MIL-DTL-38999, Series I LJT, II JT, III TV, HD
Insert Availability and Identification Chart
Series Series Series Military
X Completely tooled.
+ Majority of tooling is completed
(contact Amphenol Aerospace for availability).
u Not tooled for 02-R.
P Available with Pin contacts only
S Available with Socket contacts only
P/S Available with Pin contacts or Socket contacts
H Ground plane proprietary option available. Arrg. 9-5 is exclusively
ground plane type.
n Not Mil-Qualied.
G 21-75 is Mil-Qualied with twinax contacts only.
Note: MS connector 21-75 is supplied with size 8 twinax.
Commercial connector 21-75 is supplied with size 8 coax.
HD designates High Density 38999 Series III insert patterns which
use size 23 contacts only. Not rated over 175°C.
* Hermetic inserts - solder termination standard. (Contact Amphenol
Aerospace for optional PCB or eyelet termination).
** Two size 16 contacts dedicated to ber optics. See the Fiber Optic
section for more information.
*** For use in MIL-STD-1760 applications (see pages 75 and 76).
For RG 180/U and RG 195/U cables only.
†† Size 8 Coax and Twinax are interchangeable.
(2) Not Tooled for RP or 02RE
(3) Pin inserts only, not tooled for RP or 02RE (Consult Amphenol
Aerospace for avail.)
(5) MS Connector 21-79 has provision for two size 8 coax contacts.
Coax contacts are not supplied unless specied by customer.
3
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
III
SJT
I
II
Access
Aquacon
MIL-DTL-38999, Series I LJT, II JT, III TV, HD
Insert Availability and Identification Chart
MIL-DTL-
27599 Hermetics Contact Size
JT II LJT I TV III III JT/LJT
Solder
Crimp Class
H
Class
Y
TV* Service
Rating
Total
Contacts
23
HD
22D 22M 22 20 16 12 12
(Coax)
8
(Coax)
8††
(Twinax)
4
14-15 X X P P I15 14 1
15-15 15-15 D15 XXP/S P/S PI
14-18 X X P/S P/S I 18 18
15-18 15-18 D18 XXP/S P/S P
14-19nX X I 19 19
15-19 15-19 D19 X P P P
14-35 X P P M 37 37
15-35 15-35 D35 X P/S P/S P
14-37 X X P P M 37 37
15-37 XXP P
15-55nN 55 55
14-68n2P P 1 8 8
15-68nX X
14-97 X P P I 12 8 4
15-97 15-97 D97 XXP P P
17-217-2E2 X uM 39 38 1
17-EAnM 19 10 3 2 4
17-ECnM 41 32 9
16-6 X P P I 6 6
17-617-6E6 X P P P
16-8X X P P II 8 8
17-8H17-8HE8XXP/S P/S P
16-13n2I 13 13
17-13n2
17-22n17-22Hn uCoax 4 2 2
17-25n17-25n2M 24 22 2
16-26 X X P/S P/S I 26 26
17-26 17-26 E26 XXP/S P/S P
16-35 X P P M 55 55
17-35 17-35 E35 XXP P P
16-42 X M 42 42
17-42nP
17-52nXuM 2 2
16-55 X X P/S P/S M 55 55
17-55 XXP/S P/S
17-60nX I/Coax 10 8 2
17-73nN 73 73
16-99 X X P P I 23 21 2
17-99 17-99 E99 XXP P
19-ADnXuInst. 17 16 1
19-FAnM 23 6 8 7 2
18-11 X X P P II 11 11
19-11H19-11HF11 XXP P P
19-18 19-18 F18 22M 18 14 4
18-28 X X I 28 26 2
19-28n19-28 F28 X P X
18-30 X X I 30 29 1
19-30nX P
19-31nXM 15 12 1 2
18-32 X X P/S P/S I 32 32
19-32 19-32 F32 XXP/S P/S P
18-35 X P P M 66 66
19-35 19-35 F35 X P P P
18-53 X X M 53 53
19-53nP
18-66 X X P P M 66 66
19-66 X P P
19-67nX 3 S S M 67 67
18-68n2I 18 18
19-68n19-68n3S
18-96n2I 9 9
19-88nN 88 88
20-1X P P M 79 79
21-1X P/S P/S
Series Series Series Military
4Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
III
SJT
I
II
Access
Aquacon
MIL-DTL-
27599 Crimp Hermetics Service
Rating
Total Contact Size
JT II LJT I TV III III JT/LJT
Solder H Y TV* 23
HD
22D 22M 22 20 16 16
(Cx)
12 12
(Cx)
10
(Power)
8
(Power)
8
(Cx)
8††
(Twinax)
4
20-2XM 65 65
21-2nX
20-11n3I 11 11
21-11H21-11HG11 X
20-16 X X P/S P/S II 16 16
21-16H21-16HG16 XXP P P
21-25nI 25 25
21-27nXI 27 27
21-29 XI 27 19 4 4
20-35 X P P M 79 79
21-35 21-35 G35 X P/S P/S P
20-39 X X P P I 39 37 2
21-39 21-39 G39 XXP P P
20-41 X X P P I 41 41
21-41 21-41 G41 XXP/S P/S P
21-48nM 4 4
21-75H21-75HG G75 2XNM4 4 (4)
21-79n21-79n2XII 19 17 2 (2)
21-121nN 121 121
22-1X P/S P/S M 100 100
23-1X P P
22-2X X P P M 85 85
23-2XXP P
23-6Hn 23-6Hn X P M 6 6
22-14n2uI 14 14
23-14n23-14n2u
22-21 X X P P II 21 21
23-21H23-21HH21 XXP P P
22-32 X X P P I 32 32
23-32nXP
23-34nXI 34 34
22-35 X P/S P/S M 100 100
23-35 23-35 H35 X P P P
22-53nPI 53 53
23-53 23-53 H53 XX P/S P/S P
23-54 nX M 53 40 9 4
22-55 X X P P I 55 55
23-55 23-55 H55 X P
23-63 nS M 57 49 4 4
23-97nXII 16 16
23-99nXII 11 11
23-151 nN 151 151
24-1X P P M128 128
25-1X P P
24-2XM 100 100
25-2X
24-4X P P I 56 48 8
25-425-4J4 X P
25-7n25-7J7 X MTwx 99 97 2
25-8HJ8uTwinax 8 8
25-11*** J11 2uN 11 2 9
25-16nM 8 6 2
25-17nuM 42 36 6
24-19nX P P I 19 19
25-19H25-19HJ19 X P
25-20n25-20*** J20 2uN 30 10 13 4 3
MIL-DTL-38999, Series I LJT, II JT, III TV, HD
Insert Availability and Identification Chart
X Completely tooled.
+ Majority of tooling is completed
(contact Amphenol Aerospace for availability).
u Not tooled for 02-R.
P Available with Pin contacts only
S Available with Socket contacts only
P/S Available with Pin contacts or Socket contacts
H Ground plane proprietary option available. Arrg. 9-5, 26-62 is exclusively
ground plane type.
n Not Mil-Qualied.
G 21-75 is Mil-Qualied with twinax contacts only.
* Hermetic inserts - solder termination standard. (Contact Amphenol
Aerospace for optional PCB or eyelet termination).
HD designates High Density 38999 Series III insert patterns which use
size 23 contacts only. Not rated over 175°C.
** Two size 16 contacts dedicated to ber optics. See the Fiber Optic
Section for more information.
*** For use in MIL-STD-1760 applications (see pages 75 and 76).
For RG 180/U and RG 195/U cables only.
†† Size 8 Coax and Twinax are interchangeable.
(2) Not Tooled for RP or 02RE
(3) Pin inserts only, not tooled for RP or 02RE (Consult Amphenol for avail.)
(4) MS connector 21-75 is supplied with size 8 twinax.
Commercial connector 21-75 is supplied with size 8 coax.
(5) MS Connector 21-79 has provision for two size 8 coax contacts.
Coax contacts are not supplied unless specied by customer.
(PWR) Sufx at end of part number to replace coax, twinax, and ber contacts
with power contacts.
Series Series Series Military
5
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
III
SJT
I
II
Access
Aquacon
(Insert arrangements requiring non-standard shells)
X Completely tooled.
+ Majority of tooling is completed (contact
Amphenol Aerospace for availability).
u Not tooled for 02-R.
P Pin inserts only (contact Amphenol Aerospace
for socket availability).
H Ground plane proprietary option available.
Arrangement 9-5, 25-62 is exclusively ground
plane type.
n Not Mil-Qualied.
* Hermetic inserts - solder termination standard.
(Contact Amphenol Aerospace for optional PCB
or eyelet termination).
** Two size 16 contacts dedicated to ber optics.
See the Fiber Optic section for more information.
*** For use in MIL-STD-1760 applications
(pgs. 75 and 76).
For RG 180/U and RG 195/U cables only.
†† Size 8 Coax and Twinax are interchangeable.
Note: 25L-3 and 25L-7 use longer shells.
(PWR) Sufx at end of part number to replace coax,
twinax, and ber contacts
with power contacts.
SELECT NON-STANDARD SHELL SIZE
- Special Insert Arrangement
Contact Size
Shell Size-
Insert Arrg.
Crimp Hermetics* Service
Rating
Total
Contacts
Comments 22D 20 16 12
9-2X I 2 Formerly Pyle 2
15-4X II 4 Formerly Pyle 4
15-25 XM25 Formerly Pyle 22 3
17-20 X M 20 Formerly Pyle 16 4
21-12 X I 12 Formerly Pyle 3 9
21-21 X M/Inst. 41 Improved sealing 32 9
21-99 X M 16 Formerly Pyle 5 11
25-92 X M 101 Formerly Pyle 92 9
25-97 X M 42 Formerly Pyle 26 3 13
Contact Size
Shell Size-
Insert Arrg.
Crimp Hermetics* Service
Rating
Total
Con-
tacts
22D 20 8 4 0
25L-3X II 3 1 2
25L-7X II 7 7
33-3X II 3 1 2
33-5X II 5 5
33-6X II 6 2 4
37-5X II 4 4
SELECT SHELL SIZE - SPECIAL INSERT ARRANGEMENT
(Not Mil-Spec Qualified)
MIL-DTL-
27599 Hermetics Contact Size
JT II LJT I TV III III JT/LJT
Solder Crimp H Y TV* Service
Rating
Total
Contacts
23
HD
22D 20 16 12
(Fiber)
12 12
(Coax)
10 8
(Coax)
8††
(Twinax
8
Quadrax
4
24-24 X P P I 24 12 12
25-24H25-24HJ24 X P P
25-26nH FI 25 16 5 4
24-29 XI 29 29
25-29H25-29HJ29 XX
24-35 X P P New 128 128
25-35 25-35 J35 X P P PM
24-37 XI 37 37
25-37H25-37HJ37 X
25-41nNInst. 41 22 3 11 2 3
24-43n3I 43 23 20
25-43 25-43 J43 X 2 u
25-46 25-46 J46 2uI 46 40 4 2
24-61 X X P P I 61 61
25-61 25-61 J61 XXP P P
25-62 nH XuI 12 8 4
25-90 J90 uI 46 40 4 2
25-187 nN 187 187
25-1A nN 8 4 4
25-AT nXM 60 31 12 11 2 2 2
25-F4 nXM/I 66 49 13 4
TV SERIES III
MIL-DTL-38999, Series I LJT, II JT, III TV, HD
Insert Availability and Identification Chart
Series Series Series Military
Contact Size
Shell Size-
Insert Arrg.
Crimp Service
Rating
Total
Contacts
Comments 22D 20 16 12
25-64 X 64 Formerly Pyle 40 8 10 6
LJT SERIES I
SELECT SHELL SIZE - SPECIAL INSERT ARRANGEMENT
(Not Mil-Spec Qualified)
6Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
III
SJT
I
II
Access
Aquacon
Front face of pin inserts illustrated
MIL-DTL-38999, Series I LJT, II JT, III TV, HD
Insert Arrangements
CONTACT LEGEND 8 10 12 16 20 22 22M 22D 23
A
B
A
B
C
1
2
3
4
56
1
2
3
4
5
67
82
1
9
7
3
54
6
A
B
51
6
4
3
2
1
2
3
4
BA
A
B
C
D
CA
B
AB
8-2 8-3 8-6 8-35 8-44 8-97 8-98
9-3 9-6 9-7 9-22 9-35 9-44 9-98 11-2
9-5 9-9 HD 9-35 9-94 9-98 11-2
M M Grounded M M N I M M M M I I
2 3 1 6 7 9 2 6 4 2 2 2 3 2
20 20 8 Twinax 22M 22M 23 20 22D 22 20 22M 20 20 16
12
13
19
18
17
16 15
14
9
8
4
5
6
10
11
1
2
3
14
13
12 11 10
28
29
30
15
16
25
26
27
38
39
41
40 36
24
35
34
33
20
32
31
17
18
19
21 22 23
37
9
8
7
6
5
4
3
2
11
6
11
17
30
A
B
C
D
E
F
A
B
C
DE
F
G
H
A
B
C
D
E
F
G
H
J
K
L
NM
A
D
C
B
16-6 16-8 16-13
17-2 17-6 17-8 17-13 17-22
17-EA 17-EC 17-2 17-6 17-8 17-22
M I II I Coax
10 3 2 4 32 9 38 1 6 8 13 2 2
22D 20 16 12 22D 20 22D 8 Twinax 12 16 16 12 Coax 8 Coax
HD: High Density HD38999 (use size 23 contacts only)
A
B
C
D
E
F
G
H
22
1
20
A
C
D
E
FB18
29
32
1
1
21
22
A
B
C
D
AB
C
D
E
F
G
H
JK
A
BC
D
A
B
CD
E
12-8 12-22 12-35 12-98 14-4 14-5
13-8 13-22 13-35 13-98 15-4 15-5
13-8 13-26 13-32 HD 13-35 13-63 13-98 15-AT 15-4 15-5
I M M N M I I I I II
8 22 6 2 32 22 2 2 10 10 3 4 5
20 22M 22D 12 23 22D 16 12 20 22D 12 12 16
A
BC
D
A
B
C
D
E
A
B
C
D
E
F
12
3
4
5
6
7
8
9
10
11
12
13
12
3
4
5
6
7
8
9
10 17
16
19
18
15
14
13
12
11
12
3
4
5
6
7
8
9
10
11
1213
A
B
D
C
A
B
C
D
EF
A
B
C
D
E
F
G
A
B
C
A
B
C
D
10-4 10-5 10-13 10-35 10-98 10-99 12-3 12-4
11-4 11-5 11-6 11-13 11-35 11-98 11-99 13-3 13-4
11-4 11-5 11-19 HD 11-35 11-54 11-98 11-99 13-4
I I I M N M II I I II I
4 5 6 13 19 13 4 6 7 3 4
20 20 20 22M 23 22D 22D 20 20 16 16
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
A
B
C
D
E
F
G
H
J
K
L
MN
P
R
S
TU
AB
C
D
E
FG
H
J
K
L
M
NP
R
S
T
UV
3
2
1
13
12
11
4
5
6
7
8
9
10
14
15
16
17
18
19
20
23
22
21
24
25
1
21
31
1
11
21
31
39
16
2417 3125
3932
46
5247
40
5553
10
41
A
B
C
D
E
F
GH
AB
C
D
E
F
G
H
J
K
L
M
14-15 14-18 14-19 14-35 14-37 14-68 14-97
15-15 15-18 15-19 15-35 15-37 15-68 15-97
15-15 15-18 15-19 15-25 15-35 15-55 HD 15-97
I I I M M M N I I
14 1 18 19 22 3 37 37 55 8 8 4
20 16 20 20 22D 16 22D 22M 23 16 20 16
Shell Size &
Insert Arrg. for:
Series II JT
Series I LJT
Series III TV
Service Rating
Number of Contacts
Contact Size
Shell Size &
Insert Arrg. for:
Series II JT
Series I LJT
Series III TV
Service Rating
Number of Contacts
Contact Size
Shell Size &
Insert Arrg. for:
Series II JT
Series I LJT
Series III TV
Service Rating
Number of Contacts
Contact Size
Shell Size &
Insert Arrg. for:
Series II JT
Series I LJT
Series III TV
Service Rating
Number of Contacts
Contact Size
Shell Size &
Insert Arrg. for:
Series II JT
Series I LJT
Series III TV
Service Rating
Number of Contacts
Contact Size
7
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
III
SJT
I
II
Access
Aquacon
Front face of pin inserts illustrated
MIL-DTL-38999, Series I LJT, II JT, III TV, HD
Insert Arrangements
CONTACT LEGEND 8 10 12 16 20 22 22M 22D 23
HD: High Density HD38999
(use size 23 contacts only)
12
3
4
5
6
7
8
9
10
11 12 13 14
15 16
17
18
19
20
21
22
23
24
AB
C
D
E
F
G
H
J
K
L
M
N
P
R
STU
V
W
X
Y
Z
ab
c
1
3
4
9
10
16
17
24
25
31
32
39
40
47
46
52
53
55
1
21
42
41
31
11
A
B
1
3
4
9
10
16
17
24 31
25
32
39
40
46
47
52
53
55
1
5
2
8
9 3
10
7
64
16-26 16-35 16-42 16-55
17-25 17-26 17-35 17-42 17-55
17-26 17-35 17-52 17-60
M I M M M M I/Coax
22 2 26 55 42 2 55 8 2
22D 8 Coax 20 22D 22 8 Twinax 22M 22D 8 Coax
12
7
3
815
24
16
25
33
42
50
59
67
72 73
71
66
58
49
41
32
AB
C
D
E
F
G
H
J
K
L
M
N
P
R
STU
V
W
X
Y
Z
1
2
3
4
5
6
7
8
9
10
11
12
18
19 17
16
23
15
22
20
21 14
13
A
B
C
D
E
F
G
H
J
K
L
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
A
B
C
D
E
F
G
H
R
J
K
L
M
N
P
S
T
U
V
W
X
Y
Z
a
b
c
d
e
16-99 18-11 18-28
17-99 19-11 19-18 19-28
17-73 HD 17-99 19-FA 19-11 19-18 19-28
N I M II M M
73 21 2 6 8 7 2 11 14 4 26 2
23 20 16 22D 20 16 12 16 22D 8 Twinax 20 16
A
B
C
D
E
F
G
H
J
K
L
M
N
P
RS
TU
V
W
X
Y
Z
a
b
c
d
e
gf
A
B
C
E
K
M
N
R
S
U
V
W
g
h
f
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
f
g
h
j
1
2
3
4
9
10
16
17
24
25
33
34
42
43
50
51
57
58
63
64
66
1
41
51
52
53
31
11
21
1
2
3
4
9
10
24
16
17 25
33
34
42
43
50
51
57
58
63
64
66
18-30 18-32 18-35 18-53 18-66
19-30 19-32 19-35 19-53 19-66
19-31 19-32 19-35
I M 1 M M M
29 1 2 1 12 32 66 53 66
20 16 8 Coax 12 22D 20 22D 22 22M
1
3
4
9
10
16
17
24
25
34
35
43
44
51
52
58
59
64
65
67
A
BL
CK
DJ
EH
FG R
U
M
TN
SP
1
88
84
73
55
31
30
A
BH
C
D
F
E
GJ
1
2
15 314
13
12
4
5
11 8
710
16
89
A
12
13
19
18
17
16 15
14
9
8
4
5
6
10
11
1
2
3
18-68 18-96
19-67 19-68
19-88 HD 19-AD 19-FA
M I N I Inst. M
67 18 88 9 16 1 6 8 7 2
22M 16 23 12 20 8 Twinax 22D 20 16 12
Shell Size &
Insert Arrg. for:
Series II JT
Series I LJT
Series III TV
Service Rating
Number of Contacts
Contact Size
Shell Size &
Insert Arrg. for:
Series II JT
Series I LJT
Series III TV
Service Rating
Number of Contacts
Contact Size
Shell Size &
Insert Arrg. for:
Series II JT
Series I LJT
Series III TV
Service Rating
Number of Contacts
Contact Size
Shell Size &
Insert Arrg. for:
Series II JT
Series I LJT
Series III TV
Service Rating
Number of Contacts
Contact Size
8Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
III
SJT
I
II
Access
Aquacon
Front face of pin inserts illustrated
MIL-DTL-38999, Series I LJT, II JT, III TV, HD
Insert Arrangements
A
B
C
D
E
F
G
HJ
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
24
23
25
26
27
1
11
21
31
41
51
61 71
79
AB
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
UVW
XYZ
a
b
c
d
e
f
g
h
i
j
k
m
n
p
q
r
AB
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
VW
XY
Z
a
b
c
d
e
f
g
h
i
j
k
m
n
p
q
r
s
t
20-35 20-39 20-41
21-27 21-35 21-39 21-41
21-29 21-35 21-39 21-41
I I M 1 I
27 19 4 4 79 37 2 41
20 20 16 12 22D 20 16 20
HD: High Density HD38999 (use size 23 contacts only)
Note: MS connector 21-75 is supplied with four size 8 twinax contacts.
Commercial connector 21-75 is supplied with four size 8 coax contacts.
MS connector 21-79 has provision for two size 8 coax contacts.
Coax contacts are not supplied unless specied by customers.
CONTACT LEGEND 8 10 12 16 20 22 22M 22D 23
1
21
31
41
51
61
71
79
11
1
31
21
11
41
51
61
65
A
B
C
D
E
F
G
H
J
K
L
A
B
C
D
E
F
G
H
J
K
L
M
N
PR
S
AB
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
a
b
20-1 20-2 20-11 20-16
21-1 21-2 21-11 21-16 21-25
21-11 21-16
M II I II I
79 65 11 16 25
22M 22 12 16 20
A
B
C
DA
BC
D
AB
C
D
E
F
G
H
J
K
L
M
N
P
R
ST
UV
15
613
23
22
14
32
33 43
44 55
56 66
67 78
79 89
90 99
100 108
109 116
117 121
1
2
3
4
5
6
7
8
15
16
24
25
34
35
45
46
55
56
66
67
76
77
85
86
93
94
95
96
97
98
99
100
1
4
5
11
12
19
20
28
29
38
39
47
48
57
58
66
67
74
75
81
82
85
22-1 22-2
21-75 21-79 23-1 23-2
21-48 21-75 21-79 21-121 HD
M N II N M M
4 4 17 (See Note) 121 100 85
8 power (See Note) 22D 23 22M 22
Shell Size &
Insert Arrg. for:
Series II JT
Series I LJT
Series III TV
Service Rating
Number of Contacts
Contact Size
Shell Size &
Insert Arrg. for:
Series II JT
Series I LJT
Series III TV
Service Rating
Number of Contacts
Contact Size
Shell Size &
Insert Arrg. for:
Series II JT
Series I LJT
Series III TV
Service Rating
Number of Contacts
Contact Size
9
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
III
SJT
I
II
Access
Aquacon
Front face of pin inserts illustrated
1
2
34
5
6
7
8
15
16
24
25
34
35
45
46
55
56
66
67
76
77
85
86
93
94
9596
97
98
99
100
AB
C
D
E
F
G
H
J
K
L
M
N
P
RSTU
VW
X
Y
Z
a
b
c
d
e
f
g
h
km
np
q
r
s
t
AB
u
v
w
x
y
zAB
CC
DD
EE
FF
GG
HH
123
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
2223 24 25
2627
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
4344
45 46
47
48
4950
51
52
53
AB
C
D
E
F
G
H
J
K
L
M
N
P
R
S
TUVW
X
Y
Z
a
b
c
d
e
f
g
h
i
j
k
mn
p
q
r
s
t
v
w
x
y
z
AA BB
CC
u
DD
EE
FF
GG
HH
24 23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
32125
44 43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27 26
45 46
51
56
49
48
54
46
53
47
55
50
57
22-35 22-53 22-55
23-35 23-53 23-55
23-35 23-53 23-54 23-55 23-63
M I M I M
100 53 40 9 4 55 49 4 4
22D 20 22D 16 12 20 22D 16
Coax
12
Coax
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
A
B
C
D
E
F
G
H
J
K
L
14
51
1
22 21
12
32
33 44
45 57
58 69
70 82
83 94
95
130
108
140
120
147
131
107
119
141
151
148
1
7
8
14
24
25
48
58
59
70
71
81
94
104
105
114
115
121
125
35
15
1
2
3
19 40 51
73
92
99
100
24-1 24-2
23-97 23-99 25-1 25-2
23-151 HD
II II N M M
16 11 151 128 100
16 16 23 22M 22
MIL-DTL-38999, Series I LJT, II JT, III TV, HD
Insert Arrangements
CONTACT LEGEND 8 10 12 16 20 22 22M 22D 23
HD: High Density HD38999
(use size 23 contacts only)
A
B
C
D
E
F
A
BK
CJ LP
MN
DH
EG
F
A
B
C
D
E
F
G
H
J
K
L
MP
R
S
N
T
U
V
W
X
AB
C
D
E
F
G
H
J
K
L
MNPR
S
T
U
V
W
X
Y
Z
a
b
c
d
e
f
g
h
j
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
STU
V
W
X
Y
Z
a
b
c
de
f
g
h
j
k
l
22-14 22-21 22-32
23-6 23-14 23-21 23-32 23-34
23-6 23-21
M I II I I
6 14 21 32 34
8 Twinax 12 16 20 20
Shell Size &
Insert Arrg. for:
Series II JT
Series I LJT
Series III TV
Service Rating
Number of Contacts
Contact Size
Shell Size &
Insert Arrg. for:
Series II JT
Series I LJT
Series III TV
Service Rating
Number of Contacts
Contact Size
Shell Size &
Insert Arrg. for:
Series II JT
Series I LJT
Series III TV
Service Rating
Number of Contacts
Contact Size
10 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
Series III, II, I
III
SJT
I
II
Access
Aquacon
10
Front face of pin inserts illustrated
A
B
C
D
E
F
G
H
AB
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
a
bcd
e
f
g
h
k
m
n
p
qrs
t
u
v
w
AB
C
D
E
FGH
J
K
L
M
NP
R
ST
UV
AB
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
1
2
3
4
5
6
7
24-19
25-19 25-20
25-16 25-17 25-19 25-20***
M M I N
6 2 36 6 19 10 13 3 4
20 4 22D 8 Twinax 12 20 16 8 Twinax 12 Coax
(With Matched Impedance)
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
YZ
a
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18 19 20
21
22
23
24
25
A
B
C
D
E
F
G
H
J
K
L
M
N
P
RST
U
V
W
X
Y
Z
a
bc
d
e
f
1
4
7
8
14
15
24
25
35
36
47
48
58
59
70
71
81
82
93
94
104
105
114
115
121
125
128
24-24 24-29 24-35
25-24 25-29 25-35
25-24 25-26 25-29 25-35
I I I M
12 12 16 5 4 29 128
16 12 20 12 8 Coax 16 22D
MIL-DTL-38999, Series I LJT, II JT, III TV
Insert Arrangements
CONTACT LEGEND 8 10 12 16 20 22 22M 22D 23
*** For use in MIL-STD-1760 applications (see pages 75 and 76).
ABC
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Za
bc
d
e
f
g
h
k
m
n
p
q
r
t
u
vw
x
y
z
sJJ
KK
LL
AA
BBCC
DD
EE
FF
GG
HH
1
6
7
15
16
18
19
21
22
24
26
28
29
32
33
41
42
46
53
59
60
64
67
68
72
74
76
78
79
81
82
84
85
93
94
99
25 75
A
B
C
D
E
F
G
H
A
B
C
D
E
F
G
HJ
KL
24-4
25-4 25-7 25-11
25-4 25-7 25-8 25-11***
I M Twinax N
48 8 97 2 8 2 9
20 16 22D 8 Twinax 8 Twinax 20 10
Shell Size &
Insert Arrg. for:
Series II JT
Series I LJT
Series III TV
Service Rating
Number of Contacts
Contact Size
Shell Size &
Insert Arrg. for:
Series II JT
Series I LJT
Series III TV
Service Rating
Number of Contacts
Contact Size
Shell Size &
Insert Arrg. for:
Series II JT
Series I LJT
Series III TV
Service Rating
Number of Contacts
Contact Size
11
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
III
SJT
I
II
Access
Aquacon
† Coax contacts for RG180/U or RG195/U cable.
AB
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
f
g
h
k
m
n
p
q
r
BP
CN
DM
EL
F
G
H
J
K
A
RY
X S
W
Z
T
UV
de
npqg
ac
b
j
k h
m
st
r
i
AB
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
XYZ
a
b
c
d
e
f
g
h
k
m
np
q
r
s
tu
v
w
x
24-37 25-43
25-37 25-43
25-37 25-41 25-43
I N/Inst. I
37 22 3 11 2 3 23 20
16 22D 20 16 12 Coax 8 Twinax 20 16
Front face of pin inserts illustrated
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
f
g
h
k
m
n
p
q
r
s
t
u
v
w
x
y
z
AA
AB
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
ab
c
d
e
f
g
h
i
j
k
m
n
p
q
r
s
t
uv
w
x
y
z
BB
CC
DD
EE
FF
GG HH
JJ
KK
LL
MM
NN
AA
PP
D A
CB
18
45
72
63
A
B
C
D
E
F
G
H
J
KL
M
N
a
P
R
S
T
U
V
W
X
Y
Z
b
c
d
e
fg
h
AA
k
q
m
n
p
r
s
tu
v
w
x
y
z
24-61
25-46 25-61
25-46 25-61 25-62 25-90
I I I I
40 4 2 61 8 4 40 4 2
20 16 8 Coax † 20 16 8 20 16 8 Twinax
Ground Plane Only
MIL-DTL-38999, Series I LJT, II JT, III TV, HD
Insert Arrangements
CONTACT LEGEND 8 10 12 16 20 22 22M 22D 23
1
17
18
19
49
35
20
21
22
23
16
15
48
59
60 66 64
65
37 50 51 41 42 43
31
30
38 39 40 29
27
26
25
24
54636261
36
325352
44
55
56
57
46
34
14
13
45
12
11
10
9
8
7
6
5
4
3
2
33
28
47
58
1
411
21
20
12
32
33 45
46 59
60 72
73 86
87 101
102
142
116
155
129
167
143
115
128
177
176
185
184
187
156
168
3
B
H
C
D
G
E
A
F
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
45
57
52
51
59
60 31
32
33
46
53
47
34
35
36
37
54
48
38
39
40
41
42
43
44
50
56
58
49 55
25-F4 25-187 HD 25-1A 25-AT
Size 22D=M, Balance =I N N N
49 13 4 187 4 4 2 2 13 12 31
22D 16 12 23 16 4 10 12 16 20 22D
HD: High Density HD38999
(use size 23 contacts only)
Shell Size &
Insert Arrg. for:
Series II JT
Series I LJT
Series III TV
Service Rating
Number of Contacts
Contact Size
Shell Size &
Insert Arrg. for:
Series II JT
Series I LJT
Series III TV
Service Rating
Number of Contacts
Contact Size
Shell Size &
Insert Arrg. for:
Series II JT
Series I LJT
Series III TV
Service Rating
Number of Contacts
Contact Size
12 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
III
SJT
38999
I
II
Access
Aquacon
Series III
A
A
J
H
G
FE
D
C
B
M
L
K
S
RP
N
98
100
101
90
79
67
57
46
24
36
13
5
1
4
12 23 35 45 56 66 78 89 97
2
3
99
MA
LB
N
KC
JD
HE
GF
YW
X
aU
ZV
rm
pnks
b
c
deP
R
S
T
j
w
h
g
f
uv
t
Shell Size &
Insert Arrg. for:
BA
D
CB
A
3
2
1
13
12
11
4
5
6
7
8
9
10
14
15
16
17
18
19
20
23
22
21
24
25
Series III TV 9-2 15-4* 15-25
Service Rating I II M
Number of Contacts 2 4 22 3
Contact Size 20 16 22D 16
Shell Size &
Insert Arrg. for:
Series III TV 21-99 25-92 25-97
Service Rating M M M
Number of Contacts 5 11 92 9 26 3 13
Contact Size 22D 12 22D 16 22D 16 12
Front face of pin inserts illustrated
MIL-DTL-38999, Series III TV
Special Insert Arrangements
NOTE: Some specials shown here were formerly known as Pyle arrangements.
Consult Amphenol for how to order information for connectors with these inserts.
For further information on special arrangements consult Amphenol Aerospace, Sidney NY.
* Pyle 15-4 does not mate with Amphenol Tri-Start 15-4 insert.
CONTACT LEGEND 8 10 12 16 20 22 22M 22D 23*
A
D
C
B
16
1514
13
12
11 10
98
76
5
4
32
1
J
H
G
F
E
K
D
L
C
B
A
M
1
2
3
4
5
6
7
8
910 A
B
C
D
E
F
G
H
J
11 12
13
14
15
16
17
18
19
20
21
22
23 24
25 26
27
28
29
30
31
32
Shell Size &
Insert Arrg. for:
Series III TV 17-20 21-12 21-21
Service Rating M I M/Inst.
Number of Contacts 16 4 3 9 32 9
Contact Size 22D 12 20 12 22D 12
13
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
III
SJT
I
II
Access
Aquacon
Series III
A
Front face of pin inserts illustrated
CONTACT LEGEND
NOTE: Some specials shown here were formerly known as Pyle
arrangements. Consult Amphenol for how to order information for
connectors with these inserts.
Consult Amphenol Aerospace for longer shell drawings.
A
B
C
A
B
CD
E
F
G
B
CA
A
B
CD
E
A
B
C
D
E
F
A
B
C
D
840 22D
MIL-DTL-38999, Series III TV
Special Insert Arrangements
Shell Size &
Insert Arrg. for:
Series III TV 25L-3 25L-7
Service Rating II II
Number of Contacts 1 2 7
Contact Size 8 4 8
Shell Size &
Insert Arrg. for:
Series III TV 33-3 33-5 33-6
Service Rating II II II
Number of Contacts 1 2 5 2 4
Contact Size 4 0 4 8 4
Shell Size &
Insert Arrg. for:
Series III TV 37-5
Service Rating II
Number of Contacts 4
Contact Size 0
Non-Standard Shells or Large Contacts
51
42
3
.045
.045
.078
.090
.078
6
CA
B
.079
.018
.056
.056
INSERT ARRANGEMENT #8-35 / 9-35
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Series III
Number of
Contacts
Contact
Size
Service
Rating
Insert Designation: 8-35 9-35 9-35 6 22D M
All dimensions for reference only. For alternate rotations see page 46 for Series III, page 86 for Series II, and page 114 for Series I.
Note: Shown in this catalog are the most common insert patterns for PCB applications. For availability of other arrangements, consult
Amphenol Aerospace.
INSERT ARRANGEMENT #8-3 / 9-3
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Series III
Number of
Contacts
Contact
Size
Service
Rating
Insert Designation: 8-3 9-3 NA 3 20 M
*Service Rating: M for MIL-DTL-38999
Contact Locations
Front face of pin insert
shown
Contact Locations
Front face of pin insert
shown
14 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
Series III, II, I
III
SJT
I
II
Access
Aquacon
PCB Contacts 38999, Series I LJT, II JT, III TV
Insert Arrangements
A
C
B
.038
.075
.065
.065
INSERT ARRANGEMENT #8-98 / 9-98
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Series III
Number of
Contacts
Contact
Size
Service
Rating
Insert Designation: 8-98 9-98 9-98 3 20 I
Contact Locations
Front face of pin insert shown
A
E
DB
C
.065
.065
.130 .056
.065
.113
.113
INSERT ARRANGEMENT #10-5/11-5
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Series III
Insert Designation: 10-5 11-5 11-5
Contact Locations
Front face of pin insert shown
All dimensions for reference only. For alternate rotations see page 46 Series III, page 86 Series II, and page 114 Series I.
Note: Shown in this catalog are the most common insert patterns for PCB applications. For availability of other arrangements, consult Amphenol
Aerospace.
Number of
Contacts
Contact
Size
Service
Rating
5 20 I
15
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
Series III, II, I
III
SJT
I
II
Access
Aquacon
PCB Contacts 38999, Series I LJT, II JT, III TV
Insert Arrangements
.118
.045
.035
.146
.049
.045
.118
.146 .056
.085
.138
5
2
13
3
10
11
6
7
12
4
8
9
1
INSERT ARRANGEMENT #10-6 / 11-6
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Series III
Number of
Contacts
Contact
Size
Service
Rating
Insert Designation: NA 11-6 NA 6 20 I
Contact Locations
Front face of pin insert shown
All dimensions for reference only. For alternate rotations see page 46 for Series III, page 86 for Series II, and page 114 for Series I.
Note: Shown in this catalog are the most common insert patterns for PCB applications. For availability of other arrangements,
consult Amphenol Aerospace.
AB
C
D
E
F
.065
.113
.130
.065
.130
INSERT ARRANGEMENT #10-35 / 11-35
Connector Type:
JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Series III
Number of
Contacts
Contact
Size
Service
Rating
Insert Designation: 10-35 11-35 11-35 13 22D M
Contact Locations
Front face of pin insert shown
PCB Contacts 38999, Series I LJT, II JT, III TV
Insert Arrangements
16 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
Series III, II, I
III
SJT
I
II
Access
Aquacon
B
.094
.058
.111
A
C
INSERT ARRANGEMENT #12-3 / 13-3
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Series III
Insert Designation: 12-3 13-3 NA
Contact Locations
Front face of pin insert shown
All dimensions for reference only. For alternate rotations see page 46 for Series III, page 86 for Series II, and page 114 for Series I.
Note: Shown in this catalog are the most common insert patterns for PCB applications. For availability of other arrangements,
consult Amphenol Aerospace.
11
.030
.026
.088
.107
.158
.197
.203
.093
.120
.075
.045
.117
.126
.182
21
1
INSERT ARRANGEMENT #12-35 / 13-35
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Series III
Insert Designation: 12-35 13-35 13-35
Contact Locations
Front face of pin insert shown
Number of
Contacts
Contact
Size
Service
Rating
22 22D M
Number of
Contacts
Contact
Size
Service
Rating
3 16 II
PCB Contacts 38999, Series I LJT, II JT, III TV
Insert Arrangements
17
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
Series III, II, I
III
SJT
I
II
Access
Aquacon
U
T
SR
P
NM
L
K
J
H
GFE
D
A
B
C
.113
.225
.252
.113
.260
.065
.130
.195.195
.130
.065
.260
INSERT ARRANGEMENT #14-18 / 15-18
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Series III
Number of
Contacts
Contact
Size
Service
Rating
Insert Designation: 14-18 15-18 15-18 18 20 I
Contact Locations
Front face of pin insert shown
All dimensions for reference only. For alternate rotations see page 46 for Series III, page 86 for Series II, and page 114 for Series I.
Note: Shown in this catalog are the most common insert patterns for PCB applications. For availability of other arrangements,
consult Amphenol Aerospace.
.065
C
B
A
E
D
F
G
J
H
U
T
L
K
N
M
VR
S
.225
.225
.065
.113
.113
.195
.260
.195
.260
.130 .130
INSERT ARRANGEMENT #14-19 / 15-19
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Series III
Number of
Contacts
Contact
Size
Service
Rating
Insert Designation: 14-19 15-19 15-19 19 20 I
Contact Locations
Front face of pin insert shown
PCB Contacts 38999, Series I LJT, II JT, III TV
Insert Arrangements
18 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
Series III, II, I
III
SJT
I
II
Access
Aquacon
Contact Hole Locations
Contact
Number
Location
X Axis Y Axis
R –.131 +.293
S –.070 +.177
T +.070 +.177
U +.175 +.094
V +.178 –.036
W +.119 –.151
X .000 –.203
Y –.119 –.151
Z –.178 –.036
a –.175 +.094
b .000 +.065
c .000 –.065
F
E
AB
G
C
D
H
J
K
L
M
N
P
R
T
SU
V
W
X
Y
Z
ab
c
Contact Hole Locations
Contact
Number
Location
X Axis Y Axis
1 +.045 +.262
2 +.123 +.217
3 +.211 +.160
4 +.254 +.080
5 +.266 –.010
6 +.247 –.098
7 +.200 –.175
8 +.130 –.232
9 +.045 –.262
10 –.045 –.262
11 –.130 –.232
12 –.200 –.175
13 –.247 –.098
14 –.266 –.010
15 –.254 +.080
16 –.211 +.160
17 –.123 +.217
18 –.045 +.262
INSERT ARRANGEMENT #14-35 / 15-35
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Series III
Number of
Contacts
Contact
Size
Service
Rating
Insert Designation: 14-35 15-35 15-35 37 22D M
Contact Locations
Front face of pin insert shown
1
21
31
11
All dimensions for reference only. For alternate rotations see page 46 for Series III, page 86 for Series II, and page 114 for Series I.
Note: Shown in this catalog are the most common insert patterns for PCB applications.
For availability of other arrangements, consult Amphenol Aerospace.
INSERT ARRANGEMENT #16-26 / 17-26
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Series III
Number of
Contacts
Contact
Size
Service
Rating
Insert Designation: NA 17-26 17-26 26 20 I
Contact Locations
Front face of pin insert shown Contact Hole Locations
Contact
Number
Location
X Axis Y Axis
A .000 +.321
B +.131 +.293
C +.239 +.214
D +.305 +.099
E +.319 –.034
F +.278 –.161
G +.189 –.260
H +.067 –.314
J –.067 –.314
K –.189 –.260
L –.278 –.161
M –.319 –.034
N –.305 +.099
P –.239 +.214
PCB Contacts 38999, Series I LJT, II JT, III TV
Insert Arrangements
Contact Hole Locations
Contact
Number
Location
X Axis Y Axis
19 +.045 +.172
20 +.123 +.119
21 +.170 +.040
22 +.170 –.050
23 +.123 –.127
24 +.045 –.172
25 –.045 –.172
26 –.123 –.127
27 –.170 –.050
28 –.170 +.040
29 –.123 +.119
30 –.045 +.172
31 +.045 +.074
32 +.090 –.004
33 +.045 –.082
34 –.045 –.082
35 –.090 –.004
36 –.045 +.074
37 .000 –.004
19
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
Series III, II, I
III
SJT
I
II
Access
Aquacon
All dimensions for reference only. For alternate rotations see page 46 for Series III, page 86 for Series II, and page 114 for Series I.
Note: Shown in this catalog are the most common insert patterns for PCB applications. For availability of other arrangements,
consult Amphenol Aerospace.
INSERT ARRANGEMENT #16-35/17-35
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Series III
Number of
Contacts
Contact
Size
Service
Rating
Insert Designation: 16-35 17-35 17-35 55 22D M
Contact Locations
Front face of pin insert shown Contact Hole Locations
Contact
Number
Location
X Axis Y Axis
28 .000 –.004
29 .000 –.094
30 .000 –.184
31 .000 –.274
32 +.089 +.316
33 +.078 +.221
34 +.078 +.131
35 +.078 +.041
36 +.078 –.049
37 +.078 –.139
38 +.078 –.229
39 +.078 –.319
40 +.172 +.279
41 +.156 +.176
42 +.156 +.086
43 +.156 –.004
44 +.156 –.094
45 +.156 –.184
46 +.156 –.274
47 +.242 +.221
48 +.234 +.131
49 +.234 +.041
50 +.234 –.049
51 +.234 –.139
52 +.234 –.229
53 +.312 +.086
54 +.312 –.004
55 +.312 –.094
17
10
4
1
3
9
16
24 31
25 32
39
40
46
47
52
53
55
Contact Hole Locations
Contact
Number
Location
X Axis Y Axis
1 –.312 +.086
2 –.312 –.004
3 –.312 –.094
4 –.242 +.221
5 –.234 +.131
6 –.234 +.041
7 –.234 –.049
8 –.234 –.139
9 –.234 –.229
10 –.172 +.279
11 –.156 +.176
12 –.156 +.086
13 –.156 –.004
14 –.156 –.094
15 –.156 –.184
16 –.156 –.274
17 –.089 +.316
18 –.078 +.221
19 –.078 +.131
20 –.078 +.041
21 –.078 –.049
22 –.078 –.139
23 –.078 –.229
24 –.078 –.319
25 .000 +.329
26 .000 +.176
27 .000 +.086
PCB Contacts 38999, Series I LJT, II JT, III TV
Insert Arrangements
20 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
Series III, II, I
III
SJT
I
II
Access
Aquacon
L
K
J
H
G
F
E
D
A
B
C
.105
.132
.092
.053
.179
.275
.215
.281
.260
.105
.250
INSERT ARRANGEMENT #18-11 / 19-11
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Number of
Contacts
Contact
Size
Service
Rating
Insert Designation: 18-11 19-11 11 16 II
Contact Locations
Front face of pin insert shown
U
T
S
R
P
N
g
f
M
L
KJH
G
F
E
D
h
A
B
C
a
b
c
e
d
V
W
X
Y
Z
j
INSERT ARRANGEMENT #18-32 / 19-32
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Series III
Number of
Contacts
Contact
Size
Service
Rating
Insert Designation: 18-32 19-32 19-32 32 20 I
Contact Locations
Front face of pin insert shown
Contact Hole Locations
Contact
Letter
Location
X Axis Y Axis
A +.066 +.353
B +.189 +.305
C +.286 +.217
D +.345 +.098
E +.357 –.033
F +.321 –.160
G +.242 –.265
H +.130 –.335
J .000 –.359
K –.130 –.335
L –.242 –.265
M –.321 –.160
N –.357 –.033
P –.345 +.098
R –.286 +.217
S –.189 +.305
Contact Hole Locations
Contact
Letter
Location
X Axis Y Axis
T –.066 +.353
U .000 +.230
V +.124 +.193
W +.209 +.095
X +.228 –.033
Y +.174 –.151
Z +.065 –.221
a –.065 –.221
b –.174 –.151
c –.228 –.033
d –.209 +.095
e –.124 +.193
f .000 +.096
g +.096 .000
h .000 –.096
j –.096 .000
All dimensions for reference only. For alternate rotations see page 46 for Series III, page 86 for Series II, and page 114 for Series I.
Note: Shown in this catalog are the most common insert patterns for PCB applications. For availability of other arrangements,
consult Amphenol Aerospace.
PCB Contacts 38999, Series I LJT, II JT, III TV
Insert Arrangements
21
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
Series III, II, I
III
SJT
I
II
Access
Aquacon
1
.357
.279
.201
.123
.045
.045
.090
.135
.180
.225
.270
.315
.360
410
17 25 34 43 51
58
64
66
63
57
50
42
33
24
16
9
3
INSERT ARRANGEMENT #18-35 / 19-35
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Series III
Number of
Contacts
Contact
Size
Service
Rating
Insert Designation: 18-35 19-35 19-35 66 22D M
Contact Locations
Front face of pin insert shown
A
B
C
D
S
T
E
F
U
V
G
H
W
J
c
b
K
X
d
a
P
R
L
MY
Z
N
.275
.225
.125
.400
.150
.275
.300
.200
.050
.025
.100
.150
.250
.375
.150
.250
.400
.225
.100
.375 .400
INSERT ARRANGEMENT #20-27 / 21-27
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Series III
Number of
Contacts
Contact
Size
Service
Rating
Insert Designation: 20-27 21-27 NA 27 20 I
Contact Locations
Front face of pin insert shown
All dimensions for reference only. For alternate rotations see page 46 for Series III, page 86 for Series II, and page 114 for Series I.
Note: Shown in this catalog are the most common insert patterns for PCB applications. For availability of other arrangements, consult Amphenol.
PCB Contacts 38999, Series I LJT, II JT, III TV
Insert Arrangements
22 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
Series III, II, I
III
SJT
I
II
Access
Aquacon
INSERT ARRANGEMENT #20-35 / 21-35
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Series III
Number of
Contacts
Contact
Size
Service
Rating
Insert Designation: 20-35 21-35 21-35 79 22D M
Contact Locations
Front face of pin insert shown
Contact Hole Locations
Contact
Number
Location
X Axis Y Axis
1 +.053 +.426
2 +.146 +.404
3 +.232 +.362
4 +.306 +.302
5 +.365 +.227
6 +.406 +.141
7 +.427 +.048
8 +.427 –.048
Contact Hole Locations
Contact
Number
Location
X Axis Y Axis
9 +.406 –.141
10 +.365 –.227
11 +.306 –.302
12 +.232 –.362
13 +.146 –.404
14 +.053 –.426
15 –.053 –.426
16 –.146 –.404
17 –.232 –.362
18 –.306 –.302
19 –.365 –.227
20 –.406 –.141
21 –.427 –.048
22 –.427 +.048
23 –.406 +.141
24 –.365 +.227
25 –.306 +.302
26 –.232 +.362
27 –.146 +.404
28 –.053 +.426
29 .000 +.323
30 +.098 +.322
31 +.184 +.280
32 +.258 +.220
33 +.311 +.141
34 +.332 +.048
35 +.332 –.048
36 +.311 –.141
37 +.258 –.220
38 +.184 –.280
39 +.098 –.322
40 .000 –.347
41 –.098 –.322
42 –.184 –.280
Contact Hole Locations
Contact
Number
Location
X Axis Y Axis
43 –.258 –.220
44 –.311 –.141
45 –.332 –.048
46 –.332 +.048
47 –.311 +.141
48 –.258 +.220
49 –.184 +.280
50 –.098 +.322
51 –.048 +.241
52 +.048 +.241
53 +.134 +.199
54 +.208 +.139
55 +.237 +.048
56 +.237 –.048
57 +.208 –.139
58 +.134 –.199
59 +.048 –.241
60 –.048 –.241
61 –.134 –.199
62 –.208 –.139
63 –.237 –.048
64 –.237 +.048
65 –.208 +.139
66 –.134 +.199
67 –.048 +.146
68 +.048 +.146
69 +.125 +.090
70 +.155 .000
71 +.125 –.090
72 +.048 –.146
73 –.048 –.146
74 –.125 –.090
75 –.155 .000
76 –.125 +.090
77 .000 +.053
78 +.048 –.029
79 –.048 –.029
1
31
79
61
41
21
11
71
51
All dimensions for reference only. For alternate rotations see page 46 for Series III, page 86 for Series II, and page 114 for Series I.
Note: Shown in this catalog are the most common insert patterns for PCB applications. For availability of other arrangements,
consult Amphenol Aerospace.
PCB Contacts 38999, Series I LJT, II JT, III TV
Insert Arrangements
23
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
Series III, II, I
III
SJT
I
II
Access
Aquacon
U
T
S
R
P
N
g
f
MLK
J
H
G
F
E
D
s
h
i
j
V
WA
k
Y
B
C
m
Z
a
rn
t
qp
b
c
ed
X
.300 DIA.
.567 DIA.
.835 DIA.
INSERT ARRANGEMENT #20-41 / 21-41
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Series III
Number of
Contacts
Contact
Size
Service
Rating
Insert Designation: 20-41 21-41 21-41 41 20 I
Contact Locations
Front face of pin insert shown
All dimensions for reference only. For alternate rotations see page 46 for Series III, page 86 for Series II, and page 114 for Series I.
Note: Shown in this catalog are the most common insert patterns for PCB applications. For availability of other arrangements,
consult Amphenol Aerospace.
PCB Contacts 38999, Series I LJT, II JT, III TV
Insert Arrangements
24 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
Series III, II, I
III
SJT
I
II
Access
Aquacon
INSERT ARRANGEMENT #22-35 / 23-35
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Series III
Number of
Contacts
Contact
Size
Service
Rating
Insert Designation: 22-35 23-35 23-35 100 22D M
Contact Locations
Front face of pin insert shown
Contact Hole Locations
Contact
Number
Location
X Axis Y Axis
1 –.428 +.241
2 –.467 +.154
3 –.488 +.061
4 –.415 .000
5 –.488 –.061
6 –.428 –.142
7 –.428 –.237
8 –.332 +.333
9 –.332 +.238
10 –.332 +.143
11 –.332 +.048
12 –.332 –.047
13 –.332 –.142
14 –.332 –.237
15 –.332 –.332
16 –.249 +.380
17 –.249 +.285
18 –.249 +.190
19 –.249 +.095
Contact Hole Locations
Contact
Number
Location
X Axis Y Axis
20 –.249 .000
21 –.249 –.095
22 –.249 –.190
23 –.249 –.285
24 –.249 –.380
25 –.166 +.428
26 –.166 +.333
27 –.166 +.238
28 –.166 +.143
29 –.166 +.048
30 –.166 –.047
31 –.166 –.142
32 –.166 –.237
33 –.166 –.332
34 –.166 –.427
35 –.083 +.475
36 –.083 +.380
37 –.083 +.285
38 –.083 +.190
39 –.083 +.095
40 –.083 .000
41 –.083 –.095
42 –.083 –.190
43 –.083 –.285
44 –.083 –.380
45 –.083 –.475
46 .000 +.428
47 .000 +.333
48 .000 +.238
49 .000 +.143
50 .000 +.048
51 .000 –.047
52 .000 –.142
53 .000 –.237
54 .000 –.332
55 .000 –.427
56 +.083 +.475
57 +.083 +.380
58 +.083 +.285
59 +.083 +.190
Contact Hole Locations
Contact
Number
Location
X Axis Y Axis
60 +.083 +.095
61 +.083 .000
62 +.083 –.095
63 +.083 –.190
64 +.083 –.285
65 +.083 –.380
66 +.083 –.475
67 +.166 +.428
68 +.166 +.333
69 +.166 +.238
70 +.166 +.143
71 +.166 +.048
72 +.166 –.047
73 +.166 –.142
74 +.166 –.237
75 +.166 –.332
76 +.166 –.427
77 +.249 +.380
78 +.249 +.285
79 +.249 +.190
80 +.249 +.095
81 +.249 .000
82 +.249 –.095
83 +.249 –.190
84 +.249 –.285
85 +.249 –.380
86 +.332 +.333
87 +.332 +.238
88 +.332 +.143
89 +.332 +.048
90 +.332 –.047
91 +.332 –.142
92 +.332 –.237
93 +.332 –.332
94 +.428 +.241
95 +.467 +.154
96 +.488 +.061
97 +.415 .000
98 +.488 –.061
99 +.428 –.142
100 +.428 –.237
95
97
96
100
98
99
93
85
76
66
5 5
4 5
3 4
2 4
15
7
6
5
4
3
2
1
8
16
25 35 4 6 56 67
77
86
94
All dimensions for reference only. For alternate rotations see page 46 for Series III, page 86 for Series II, and page 114 for Series I.
Note: Shown in this catalog are the most common insert patterns for PCB applications. For availability of other arrangements,
consult Amphenol Aerospace.
PCB Contacts 38999, Series I LJT, II JT, III TV
Insert Arrangements
25
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
Series III, II, I
III
SJT
I
II
Access
Aquacon
B
Z
D
C
E
F
G
Y
X
W
p
V
U
T
n
Sm
AA qr
sa
b
DD t
EE
uc
H
d
v
w
e
J
K
L
f
g
M
FF
yCC
BB
GG
z
iHH
x
h
N
j
P
Rk
A
.260
.225
.112
.336
.065
.450
.195
.455
.325
.130
.390
INSERT ARRANGEMENT #22-55 / 23-55
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Series III
Number of
Contacts
Contact
Size
Service
Rating
Insert Designation: 22-55 23-55 23-55 55 20 I
Contact Locations
Front face of pin insert shown
A
.474
.158
.316
.091
.273
.455
.182
.364
B
C
D
E
F
G
H
J
K
Y
Z
X
e
d
T
W
V
U
S
c
g
f
L
M
N
P
Q
b
a
R
INSERT ARRANGEMENT #24-31 / 25-31
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Series III
Number of
Contacts
Contact
Size
Service
Rating
Insert Designation: 24-31 NA NA 31 16 I
Contact Locations
Front face of pin insert shown
All dimensions for reference only. For alternate rotations see page 46 for Series III, page 86 for Series II, and page 114 for Series I.
Note: Shown in this catalog are the most common insert patterns for PCB applications. For availability of other arrangements,
consult Amphenol Aerospace.
PCB Contacts 38999, Series I LJT, II JT, III TV
Insert Arrangements
26 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
Series III, II, I
III
SJT
I
II
Access
Aquacon
1
815
25 36
48 59
71
82 94 105115
125
121
114
104
93
81
70
58
47
35
24
14
4
7
INSERT ARRANGEMENT #24-35 / 25-35
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Series III
Number of
Contacts
Contact
Size
Service
Rating
Insert Designation: 24-35 25-35 25-35 128 22D M
Contact Locations
Front face of pin insert shown
Contact Hole Locations
Contact
Number
Location
X Axis Y Axis
1 –.479 +.279
2 –.520 +.190
3 –.546 +.095
4 –.555 .000
5 –.546 –.095
6 –.520 –.190
7 –.479 –.279
8 –.424 +.357
9 –.415 +.190
10 –.415 +.095
11 –.415 .000
12 –.415 –.095
13 –.415 –.190
14 –.424 –.357
15 –.332 +.444
16 –.332 +.332
17 –.332 +.237
18 –.332 +.142
19 –.332 +.047
20 –.332 –.047
21 –.332 –.142
22 –.332 –.237
23 –.332 –.332
24 –.332 –.427
25 –.249 +.496
26 –.249 +.380
27 –.249 +.285
28 –.249 +.190
Contact Hole Locations
Contact
Number
Location
X Axis Y Axis
29 –.249 +.095
30 –.249 .000
31 –.249 –.095
32 –.249 –.190
33 –.249 –.285
34 –.249 –.380
35 –.249 –.475
36 –.160 +.531
37 –.166 +.427
38 –.166 +.332
39 –.166 +.237
40 –.166 +.142
41 –.166 +.047
42 –.166 –.047
43 –.166 –.142
44 –.166 –.237
45 –.166 –.332
46 –.166 –.427
47 –.166 –.522
48 –.083 +.475
49 –.083 +.380
50 –.083 +.285
51 –.083 +.190
52 –.083 +.095
53 –.083 .000
54 –.083 –.095
55 –.083 –.190
56 –.083 –.285
57 –.083 –.380
58 –.083 –.475
59 .000 +.522
60 .000 +.427
61 .000 +.332
62 .000 +.237
63 .000 +.142
64 .000 +.047
65 .000 –.047
66 .000 –.142
67 .000 –.237
68 .000 –.332
69 .000 –.427
70 .000 –.555
71 +.083 +.475
72 +.083 +.380
73 +.083 +.285
74 +.083 +.190
75 +.083 +.095
76 +.083 .000
77 +.083 –.095
78 +.083 –.190
Contact Hole Locations
Contact
Number
Location
X Axis Y Axis
79 +.083 –.285
80 +.083 –.380
81 +.083 –.475
82 +.160 +.531
83 +.166 +.427
84 +.166 +.332
85 +.166 +.237
86 +.166 +.142
87 +.166 +.047
88 +.166 –.047
89 +.166 –.142
90 +.166 –.237
91 +.166 –.332
92 +.166 –.427
93 +.166 –.522
94 +.249 +.496
95 +.249 +.380
96 +.249 +.285
97 +.249 +.190
98 +.249 +.095
99 +.249 .000
100 +.249 –.095
101 +.249 –.190
102 +.249 –.285
103 +.249 –.380
104 +.249 –.475
105 +.332 +.444
106 +.332 +.332
107 +.332 +.237
108 +.332 +.142
109 +.332 +.047
110 +.332 –.047
111 +.332 –.142
112 +.332 –.237
113 +.332 –.332
114 +.332 –.427
115 +.424 +.357
116 +.415 +.190
117 +.415 +.095
118 +.415 .000
119 +.415 –.095
120 +.415 –.190
121 +.424 –.357
122 +.479 +.279
123 +.520 +.190
124 +.546 +.095
125 +.555 .000
126 +.546 –.095
127 +.520 –.190
128 +.479 –.279
All dimensions for reference only. For alternate rotations see page 46 for Series III, page 86 for Series II, and page 114 for Series I.
Note: Shown in this catalog are the most common insert patterns for PCB applications. For availability of other arrangements,
consult Amphenol Aerospace.
PCB Contacts 38999, Series I LJT, II JT, III TV
Insert Arrangements
27
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
Series III, II, I
III
SJT
I
II
Access
Aquacon
INSERT ARRANGEMENT #24-61 / 25-61
Connector Type: JT
MIL-DTL-38999
Series II
LJT
MIL-DTL-38999
Series I
Tri-Start
MIL-DTL-38999
Series III
Number of
Contacts
Contact
Size
Service
Rating
Insert Designation: 24-61 25-61 25-61 61 20 I
Contact Locations
Front face of pin insert shown
A
E
B
C
D
F
G
H
J
K
V
L
M
N
p
R
S
T
U
X
YZ
ab
W
c
d
e
j
k
m
f
h
i
r
g
q
s
t
uv
w
x
y
z
AA
BB
CC
DD
EE
FF
GG HH
MM
NN JJ
PP KK
LL
P
All dimensions for reference only.For alternate rotations see page 46 for Series III, page 86 for Series II, and page 114 for Series I.
Note: Shown in this catalog are the most common insert patterns for PCB applications. For availability of other arrangements, consult Amphenol
Aerospace.
Contact Hole Locations
Contact
Number
Location
X Axis Y Axis
A +.196 +.500
B +.314 +.435
C +.413 +.343
D +.485 +.230
E +.527 +.101
F +.536 –.030
G +.511 –.164
H +.454 –.287
J +.368 –.391
K +.259 –.470
L +.134 –.519
M .000 –.537
N –.134 –.519
P –.259 –.470
R –.368 –.391
S –.454 –.287
T –.511 –.164
U –.536 –.030
V –.527 +.101
W –.485 +.230
X –.413 +.343
Y –.314 +.435
Z –.196 +.500
a –.068 +.454
b +.068 +.454
c +.173 +.363
d +.285 +.283
e +.362 +.175
f +.399 +.046
g +.392 –.088
Contact Hole Locations
Contact
Number
Location
X Axis Y Axis
h +.341 –.213
i +.251 –.314
j +.133 –.379
k .000 –.402
m –.133 –.379
n –.251 –.314
p –.341 –.213
q –.392 –.088
r –.399 +.046
s –.362 +.175
t –.285 +.283
u –.173 +.363
v .000 +.338
w +.147 +.223
x +.237 +.122
y +.267 –.010
z +.228 –.139
AA +.131 –.233
BB .000 –.267
CC –.131 –.233
DD –.228 –.139
EE –.267 –.010
FF –.237 +.122
GG –.147 +.223
HH .000 +.200
JJ +.105 +.094
KK +.135 –.041
LL .000 –.132
MM –.135 –.041
NN –.105 +.094
PP .000 .000
28 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
Series III, II, I
III
SJT
I
II
Access
Aquacon
PCB Contacts 38999, Series I LJT, II JT, III TV
Insert Arrangements
29
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
Series III, II, I, SJT
III
SJT
I
II
Access
Aquacon
MIL-DTL-38999, Series I LJT, II JT, III TV, HD
Contact Ratings/ Service Ratings
CONTACT RATING FOR TV III, HD, JT II, LJT I, SJT
*When tested using silver plated wire.
Contact
Size
Test Current (Amps)
Maximum
Millivolt
Drop Crimp*
Maximum
Millivolt
Drop
Crimp Hermetic Hermetic*
23 5 3 73 85
22M 3 2 45 60
22D 5 3 73 85
22 5 3 73 85
20 7.5 5 55 60
16 13 10 49 85
12 23 17 42 85
10 (Power) 33 NA 33 NA
8 (Power) 46 NA 26 NA
4 80 NA 23 NA
0 150 NA 21 NA
Contact
Size
Crimp Well Data Solder Well Data
Well
Diameter
Normal
Well Depth
Well
Diameter
Nominal
Well Depth
23 .0345 ± .0010 .141 .0345 ± .0010 .130
22M .028 ± .001 .141 .029 +.004
– .000
22D .0345 ± .0010 .141 .036 +.004
-.000
.094
22 .0365 ± .0010 .141 .036 +.004
-.000
.094
20 .047 ± .001 .209 .044 +.004
-.004
.125
16 .067 ± .001 .209 .078 +.000
-.004
.141
12 .100 ± .002 .209 .116 +.004
-.002
.141
10 (Power) .137 ± .002 .355 NA NA
8 .181 ± .002 .490 NA NA
4 .281 ± .002 .490 NA NA
0 .453 ± .002 .585 NA NA
MIL-DTL-38999 SERIES III STANDARD 500 CYCLE CONTACTS
FOR TV AND CTV, P & S
MIL-DTL-38999 SERIES III 1500 CYCLE CONTACTS, CLASSES H & J
Contact Size CTV Pins CTV Sockets
Commercial No. Military No. Supersedes Commercial No. Military No. Supersedes
12 10-597072-2X M39029/107-623 10-597073-2X M39029/106-617
16 10-597068-2X M39029/107-622 10-597069-2X M39029/106-616
20 10-597064-2X M39029/107-621 10-597065-2X M39029/106-615
22D 10-597058-3X M39029/107-620 10-597061-2X M39029/106-614
Contact Size TV/CTV Pins TV/CTV Sockets
Military No. Supersedes Military No. Supersedes
8 (Coax)* M39029/60-367 MS27536 M39029/59-366 MS27535
8 (Power) Contact Factory
8 (Twinax) M39029/90-529** N/A M39029/91-530 N/A
10 (Power) M39029/58-528 N/A M39029/56-527 N/A
12 M39029/58-365 MS27493-12 M39029/56-353 MS27490-12
16 M39029/58-364 MS27493-16 M39029/56-352 MS27490-16
20 M39029/58-363 MS27493-20 M39029/56-351 MS27490-20
22D M39029/58-360 MS27493-22D M39029/56-348 MS27490-22D
4 N/A N/A N/A N/A
0 N/A N/A N/A N/A
Above part numbers include standard 500 cycle nish designation - gold plating over suitable
underplate in accordance with SAE AS39029. For other nish variations, consult Amphenol
Aerospace.
*For use with RG180B/U and RG195A/U cable. For other size 8 coax or optional sizes 12 and
16 coax contacts available for use in Tri-Start connectors, see High Speed catalog or consult Amphenol Aerospace.
30 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
Series III, II, I
III
SJT
I
II
Access
Aquacon
Contact
Size
Pins (II JT/I LJT) Sockets (LJT) Material
Spec Number Pyle Number Spec Number Pyle Number
22D M39029/87-472 T3-4022-10P M39029/88-484 T3-4122-10P CHROMEL
22D M39029/87-471 T3-4022-10R M39029/88-483 T3-4122-10R ALUMEL
20 M39029/87-476 T3-4020-10P M39029/88-488 TS-4120-10P CHROMEL
20 M39029/87-475 T3-4020-10R M39029/88-487 T3-4120-10R ALUMEL
16 M39029/87-480 T3-4016-10P M39029/88-492 T3-4116-10P CHROMEL
16 M39029/87-479 T3-4016-10R M39029/88-491 T3-4116-10R ALUMEL
MIL-DTL-38999 SERIES II JT/ I LJT
THERMOCOUPLE CONTACTS PYLE VERSION
Above part numbers include standard nish designation - gold plating over suitable underplate in
accordance with MIL-DTL-39029. For other nishes, consult Amphenol Aerospace. Note: 22M and 22D
contacts are interchangeable. *For use with RG180B/U and RG195A/U cable. For other size 8 coax or
optional sizes 12 and 18 coax contacts available for use in JT/LJT connectors, Refer to the High Speed
Catalog. ** For use with 17/M176-00002 cable.
MIL-DTL-38999 SERIES II JT/ SERIES I LJT/SJT SERIES CRIMP CONTACTS
Contact Size JT/LJT/SJT Pins
MS No.
JT Socket MS
No.
LJT/SJT Sockets
MS No.
8 (Coax)* M39029/60-367 NA M39029/59-366
8 (Twinax) M39029/90-529** NA M39029/91-530
10 (Power) M39029/58-528 NA M39029/56-527
12 M39029/58-365 M39029/57-359 M39029/56-353
16 M39029/58-364 M39029/57-358 M39029/56-352
Contact Size JT/LJT Pins MS
No.
JT Socket MS
No.
LJT/SJT Sockets
MS No.
20 M39029/58-363 M39029/57-357 M39029/56-351
22 M39029/58-362 M39029/57-356 M39029/56-350
22M M39029/58-361 M39029/57-355 M39029/56-349
22D M39029/58-360 M39029/57-354 M39029/56-348
Contact Size Material JT/LJT Pins JT Sockets LJT Sockets
20
Chromel 10-407862-310 10-407863-310 10-407236-310
Alumel 10-407862-320 10-407863-320 10-407865-320
Iron 10-407862-335 10-407863-335 10-407865-335
Constantan 10-407862-342 10-407863-342 10-407865-342
MIL-DTL-38999 SERIES II JT/ I LJT
THERMOCOUPLE CONTACTS
Partial Listing. If you do not see the contact for your application, consult Amphenol Aerospace.
MIL-DTL-38999 SERIES II JT/ I LJT
SEALING PLUGS
Contact Size Commercial No. Military No.
8 (Coax) 10-482099-8 MS27488-8
8 (Twinax) T3-4008-59P N/A
10 (Power) 10-576225 N/A
12 10-405996-122 MS27488-12-2
16 10-405996-162 MS27488-16-2
20 10-405996-202 MS27488-20-2
22 10-405996-222 MS27488-22-2
22M 10-405996-222 MS27488-22-2
22D 10-405996-222 MS27488-22-2
** For use with M17/M176-00002 cable.
Optional design - see slash sheet MS39029.
For other contact options available for use in Tri-Start
connectors (wire wrap, thermocouple, ber optic),
consult Amphenol.
MIL-DTL-38999 SERIES III
SEALING PLUGS
Contact Size Commercial No. Military No.
8 (Coax) 10-482099-8 N/A
8 (Twinax) T3-4008-59P N/A
8 (Power) 10-405996-83 MS27488-8-3
10 (Power) T3-4010-59P M85049/81-10
12 10-405996-122 MS27488-12-2
16 10-405996-162 MS27488-16-2
20 10-405996-202 MS27488-20-2
22D 10-405996-222 MS27488-22-2
4 10-405996-43 MS27488-4-3
0 10-405996-03 MS27488-0-3
Contact Size Commercial No.
8 (Coax) 10-482099-8
8 (Twinax) 10-482099-8
10 (Power) NA
12 10-405996-012 Yellow
16 10-405996-016 Blue
20 10-405996-020 Red
22 10-405996-022 Black
22M 10-405996-022 Black
22D 10-405996-022 Black
SJT SEALING PLUGS
MIL-DTL-38999, Series I LJT, II JT, III TV
Thermocouple Contacts/Sealing Plugs
31
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
Series III, II, I, SJT
III
SJT
I
II
Access
Aquacon
FINISH DATA MIL-DTL-38999, SERIES I LJT, II JT
ALUMINUM SHELL COMPONENTS NON-HERMETIC
Finish
Suffix Finish Plus
“SR” Suffix
Indicated Finish
Standard for
JT Types Listed Below
Indicated Finish
Standard for
LJT Types Listed Below
Military Commercial
Cadmium Plated Nickel Base MS (A) (SR) JT/JTG/JTL/JTP LJT/LJTP
Anodic Coating (Alumilite) MS (C) (005) (300) JTS/JTPS/JTLS LJTPS/LJTS
Chromate Treated (Iridite 14-2) (011) (344) JTN/JTPN/JTLN LJTN/LJTPN
Olive Drab Cadmium Plate Nickel Base MS (B) (014) (386)
Electroless Nickel MS (F) (023) (424)
Nickel-PTFE Durmalon (038)
Space Grade (453)
HERMETIC CONNECTORS
Finish Suffix Indicated Finish
Standard for
JT Types Listed Below
Indicated Finish
Standard for
LJT Types Listed Below
Military Commercial
Carbon Steel Shell
Tin Plated Shell and Contacts
JT( )H / JT( )Y
JTL( )H / JTL( )Y
LJT( )Y
LJT( )H
Carbon Steel Shell Tin Plated Shell and
Gold Plated Contacts MS (D)
Stainless Steel Shell Gold Plated Contacts MS (E) (162) JTS( )Y
JTLS( )Y LJTS( )Y
MIL-DTL-38999, Series I LJT, II JT, III TV
Thermocouple Contacts/Sealing Plugs/Finishing Data
FINISH DATA MIL-DTL-38999, TRI-START, SERIES III TV
ALUMINUM SHELL COMPONENTS NON-HERMETIC*
Finish Service Class
Military Commercial
Anodic Coating (Non-Conductive) C* RX**
Electroless Nickel F (Metal)* RF
M (Composite)
Olive Drab Cadmium Plate Nickel Base W (Metal)* RW
J (Composite)
Stainless Steel with Nickel Plate (non-rewall) L
Stainless Steel with Nickel Plate (rewall) S RS
Stainless Steel K RK
Durmalon plated T* DT
Zinc-Nickel Plated Z* DZ
Electroless Nickel Space Grade G
HERMETIC SHELL COMPONENTS
Material/Finish Service Class
Military Commercial
Stainless Steel Y Y
Stainless Steel with Nickel Plate N YN
**Add Sufx (005) to part number.
Contact Size Commercial No.
8 (Coax) 10-482099-8
8 (Twinax) 10-482099-8
10 (Power) NA
12 10-405996-012 Yellow
16 10-405996-016 Blue
20 10-405996-020 Red
22 10-405996-022 Black
22M 10-405996-022 Black
22D 10-405996-022 Black
SERVICE RATING**
** Please note that the establishment of electrical safety factors is left entirely in the designer’s hands, since they are in the best position to know
what peak voltage, switching surges, transients, etc. can be expected in a particular circuit.
Service
Rating
Suggested Oper. Voltage
(Sea Level) Test Voltage (Sea
Level)
Test Voltage
50,000 Ft. Test Voltage 70,000 Ft Test Voltage 110,000 Ft.
AC (RMS) DC
M 400 500 1300 VRMS 550 VRMS 350 VRMS 200 VRMS
N 300 450 1000 VRMS 400 VRMS 260 VRMS 200 VRMS
I 600 850 1800 VRMS 600 VRMS 400 VRMS 200 VRMS
II 900 1250 2300 VRMS 800 VRMS 500 VRMS 200 VRMS
32 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
III
SJT
38999
I
II
Access
Aquacon
Series III
A
DURMALON
TM
Alternative to Cadmium
Amphenol RoHS Compliant Platings
Alternative to Cadmium
APPLICATIONS
Interest for non-hazardous alternative
nishes is gaining momentum & many
customers are currently using Durmalon
for a broad number of applications.
Durmalon combines the unique
lubrication and anti-wetting properties
of PTFE with corrosion resistance, high
conductivity and EU RoHS compliance
in a non-reective nish.
TESTING
Amphenol Aerospace has performed
extensive testing on numerous alternative
platings with the most consistent
performer being the Durmalon.
For specic applications please contact
Amphenol Aerospace.
DURMALONTM
Amphenol’s Answer to EU RoHS/ELV/Cadmium Free Restrictions
Commercial, industrial & military markets are rapidly moving away from restricted
materials such as Cadmium (Cd) & Hexavalent Chromium (Cr(VI)). Both of these
restricted materials are toxic and are known carcinogens. Amphenol is offering
an alternative nish that complies with all customer requirements tied to these
specications.
MIL-DTL-38999, Rev L has established new service classes for alternative nishes
addressing these requirements for Cadmium replacement. Amphenol is using this
and European Union Directive 2002/95/EC RoHS (Regulation of Hazardous
Substances) as a guide to qualication for all domestic, global, commercial,
industrial, & military specications requiring the reduction or elimination of
these restricted materials.
Amphenol has qualied Durmalon, with internal part number coding “DT” nish,
which meets or exceeds the 38999 designated class “T” nish, Nickel Fluorocarbon
Polymer. Durmalon is also EU RoHS compliant and is Cadmium free, Lead free, and
Hexavalent Chromium free.
We also offer additional platings such as “DX”, (Durmalon, heavy duty nal plate)
to support JSF, F-35 program. The DX plating is intended to meet higher corrosion
Sulfur Dioxide (SO2)/salt fog requirements of JSF.
Cadmium has been applied to numerous components of land, sea and air weapon
systems and NASA systems for many years as it provides sacricial corrosion
protection and excellent lubricity for threaded applications.
The Defense Logistics Agency (DLA) has added the following cadmium alternative
nishes to MIL-DTL-38999, Rev L (and other connector specs):
Nickel Fluorocarbon Polymer
Zinc-Nickel
AMPHENOL’S DURMALONTM
Durmalon, like Olive-Drab Cadmium plating (Class W), meets 500 hours of dynamic
salt spray, combined with 500 mating cycles and meets specied millivolt drop
shell-to-shell conductivity. Durmalon also meets a 200° C temperature rating.
Durmalon has been proven to meet this requirement as well as Potassium Formate-
Deicer uid testing performed by Boeing.
BLACK ZINC NICKEL
Black Zinc Nickel is Amphenol’s 2nd RoHS Compliant Plating
Alternative to Cadmium
Amphenol is now offering a new RoHS compliant alternative to
Cadmium. Black Zinc Nickel is a non-reective and conductive black
nish approved for 500 hrs salt spray making it an excellent choice for
harsh environments. Black Zinc Nickel has been qualied by the DLA,
with internal part number coding “DZ” nish, which meets or exceeds
the 38999 designated class “Z” nish. Black Zinc Nickel is compatible
with other platings and available on a wide variety of connectors and
accessories including all MIL-DTL-38999 Series III connectors.
APPLICATIONS
Interest for non-hazardous alternative nishes are gaining momentum &
many customers are currently using Black Zinc Nickel for a broad number
of applications. Black Zinc Nickel is typically used on applications for
commercial aerospace and military defense, who are now moving away
from toxic Cadmium to more environmentally friendly options.
TESTING
Amphenol Aerospace has performed extensive testing on numerous
alternative platings including Black Zinc Nickel. For specic
applications please contact Amphenol Aerospace.
Requirements Cadmium DurmalonTM Black Zinc
Nickel
Coupling Torque
Post 500 hr. salt
Shell to Shell Conductivity
<2.5 millivolts
Cycles of Durability
500 mates
Salt Spray
Dynamic 500 hours
Temperature Rating
175° C
Non-Reective
EU RoHS/ELV Compliant*
Non-Magnetic
De-icing Fluid**
Note: Specifications are subject to change without notice.
* Meets EU RoHS/ELV maximum concentration values (MCV) of
1000 ppm (0.1% w/w) or (0.01% w/w) per homogenous material.
** Potassium Formate/Acetate based de-icing fluids.
33
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
TABLE OF CONTENTS FOR SECTION A
Combined MIL-DTL-38999 Series I, II, III
Shell Size & Insert Arrangements Availability . . . . . . . 2-5
Insert Arrangement Drawings . . . . . . . . . . . . 6-13
PCB Insert Arrangements . . . . . . . . . . . . .14-28
Contact - Ratings, Service Ratings, Finish Data . . . . . 29-31
Amhenol RoHS Compliant Plating . . . . . . . . . . . 32
MIL-DTL-38999, Series III TV
Performance, Options . . . . . . . . . . . . . . .34, 35
Test Data . . . . . . . . . . . . . . . . . . . . . 36
Weight Comparison (Composite vs. Metal) . . . . . . . . 37
Dualok . . . . . . . . . . . . . . . . . . . . . . 38
HD38999, High Density . . . . . . . . . . . . . . . 39
Custom . . . . . . . . . . . . . . . . . . . . . 40
Congurator . . . . . . . . . . . . . . . . . . . 41
How to Order (Military & Commercial) . . . . . . . . . 42-46
How to Order (Boeing BACC63) . . . . . . . . . . . . 47
TV SHELL STYLES:
Crimp Wall Mounting Receptacle TVP00R (D389999/20)
/CTVP00R (Military D38999/20) . . . . . . . . . . . . 48
Crimp Box Mounting Receptacle TVP02R / CTVP02R . . . 49
Line Receptacle TV01, TVS01, CTV01, CTVS01 . . . . . . 50
Crimp Jam Nut Receptacle TV07R (D38999/24) /
CTV07R (Military D38999/24) . . . . . . . . . . . . . 51
Straight Plug TV06, TVS06, CTV06, CTVS06
(Military D38999/26) . . . . . . . . . . . . . . . . . 52
Crimp Flange Mounting Plug TV09R . . . . . . . . . . 53
Dualok Plug/Receptacle TV56, TVS56, CTV56, CTVS56 . . . 54
Crimp CLUTCH-LOK™ Straight Plug for High Vibration
TV26/MTV26 . . . . . . . . . . . . . . . . . . . 55
PCB:
PCB Wall Mounting, Back Panel TVP00, TVPS00 . . . . . 56
PCBWall Mounting, Back Panel, Clinch Nuts, TVP10, TVPS10 57
PCB Wall Mounting, Double Flange, TVP40, TVPS40 . . . . 58
PCB Box Mounting Receptacle, TVP02, TVPS02 . . . . . 59
PCB Box Mounting Receptacle, Clinch Nuts, TVP12, TVPS12 60
PCB Jam Nut Receptacle, TV07, TVS07 . . . . . . . . . 61
PCB Jam Nut Receptacle, Double Flange, TVP47, TVPS47 . 62
PCB Hermetic Box, Jam Nut, Solder , Weld Mounting. . . 63-66
* Meets EU RoHS/ELV maximum concentration values (MCV) of
1000 ppm (0.1% w/w) or (0.01% w/w) per homogenous material.
** Potassium Formate/Acetate based de-icing fluids.
HERMETIC:
Hermetic Box Mounting TVPS02Y(D38999/21) . . . .67
Hermetic Jam Nut Receptacle TVS07Y (D38999/23) . .68
Hermetic Solder Mounting TVSIY (D38999/25) . . . .69
Hermetic Weld Mounting TVSHIY (D38999/27) . . . .69
BREAKAWAY:
Breakaway Fail-Safe Connectors . . . . . . . . .70
How to Order Breakaway (Military) . . . . . . . 71, 72
How to Order Breakaway (Commercial) . . . . . . .73
Fail-Safe Lanyard Release Plug . . . . . . . . . .74
How to Order Breakaway MIL-STD-1760 (Military) . . .75
TV Breakaway (D38999/31) for MIL-STD-1760 . . . .76
TV Breakaway Commercial Version for D38999/31,
Type 6 . . . . . . . . . . . . . . . . . . . .77
How to Order Commercial Version D38999/31, Type 6 .78
Insert Arrangements for Breakaway Fail-Safe . . . . .79
Breakaway Fail-Safe 88-725041, 88-725014 . . . . .80
Breakaway Hybrid, Low Prole Lanyard Release Plug. .81
Stores Management Type II, Rail Launch
(MIL-STD-1760) . . . . . . . . . . . . . . . .81
Accessories:
Section F . . . . . . . . . . . . . . . . . 164-183
A
MIL-DTL-38999, Series III, TV
34 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
III
SJT
38999
I
II
Access
Aquacon
Series III
A
MIL-DTL-38999, Series III TV
Performance
EMI Shielding - solid metal-to-metal coupling, grounding
fingers, electroless nickel plating, and thicker wall sec tions
provide superior EMI shielding capability of 65dB minimum
at 10 GHz
Contact Protection - recessed pins in this 100% scoop-
proof connector minimize potential contact damage
Moisture Resistance - improved interfacial seal design helps
prevent electrolytic erosion of contacts
Corrosion Resistance - shells of stainless steel or cad mium
over nickel plating withstand a 500 hour salt spray exposure
Vibration/Shock - operates under severe high tempera ture
vibration, through 200°C
Firewall Capability - available in a stainless steel shell,
class RK, RS
Lockwiring Eliminated - unique, self-locking, quick cou pling
connector eliminates lockwiring
Quick Coupling - completely mates and self-locks in a 360°
turn of the coupling nut
Inventory Support Commonality - uses standard
MIL-DTL-38999 contacts, application tools,
insert arrangements
Electrostatic Discharge Protection (ESD) - protection for
sensitive circuitry without diodes, varistors, etc., with the use of
the Faraday Cage principle which shunts high voltage, high
current discharge events (see page Amphenol Filter Section)
Hermetic- air leakage limited to 1 X 10-7 cm3 per
second optional
Qualified Specifications - Stainless Steel qualified to
BACC63DB and BACC63DC specifications
TRI-STARTTM MIL-DTL-38999 SERIES III
WITH METAL SHELLS - ALUMINUM, STAINLESS STEEL, CLASS K FIREWALL
Amphenol ® Tri-Start MIL-DTL-38999* Series III Connec tors offer the highest performance capabilities for both general duty and
severe environment applications. Meeting or exceeding MIL-DTL-38999 Series III require ments, the Tri-Start connector with
standard metal shells (aluminum or stainless steel with several nish options) offers these features:
PASSIVATED
STAINLESS STEEL
ELECTROLESS
NICKEL
OLIVE DRAB
CADMIUM
DURMALON
PLATED
ZINC NICKEL
PLATED
35
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
III
SJT
I
II
Access
Aquacon
Series III
A
Applicable Patents:
Tri-StartTM Connector Patent 4,109,990.
Composite Connector Patents:
4,268,103; 4,648,670; 4,682,832; 4,703,987.
Clutch-Lok® Patent 6,152,753.
OFFER MORE VERSATILITY & OPTIONS THAN ANY OTHER
INTERCONNECTION FAMILY!
High reliability and increased versatility best
describe Amphenol MIL-DTL-38999, Series III circular connectors.
Originally designed for the harshest of environments and most
demanding of applications, Amphenol
MIL-DTL-38999 Series III, Tri-Start
connectors continue to evolve in pace with the needs of an ever-
changing market.
Amphenol Tri-Start connectors can be
congured with a number of application
specic technologies like:
High Density HD38999
Dualok
PC Tails
Filters
Fail Safe
CLUTCH-LOK
Fiber Optics
High Speed Contacts
Hermetics
Flex
Flexibility aids in design optimization through the combination of
different technologies within a common, time-tested, harsh environ-
ment connector body.
For more information about options, please call 800-678-0141 or
visit www.amphenol-aerospace.com.
MIL-DTL-38999, Series III TV
Options
HD38999
DUALOK
FILTER
PC TAILS
FAIL SAFE
CLUTCH-LOK
FIBER OPTICS
HIGH SPEED
HERMETIC
FLEX
36 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
III
SJT
38999
I
II
Access
Aquacon
Series III
A
TRI-START, SERIES III
TYPICAL SHIELDING EFFECTIVENESS TEST DATA
EMI/EMP SHIELDING EFFECTIVENESS dB
TESTING BY TRIAXIAL METHOD
TRI-START, SERIES III
TYPICAL SHIELDING EFFECTIVENESS TEST DATA
EMI/EMP SHIELDING EFFECTIVENESS dB
TESTING BY MODE STIRRING METHOD
Test data beyond 2GHz is subject to equipment variation.
* Dependant on shell nish
NOTE: For test data information on the new Clutch-Lok Tri-Start,
high vibration connectors, consult Amphenol Aerospace.
AMPHENOL® TRI-START
CONNECTORS PROVIDE EMI/
EMP SHIELDING
CAPABILITY WHICH EXCEEDS
MIL-DTL-38999 SERIES III
REQUIREMENTS.
The TV and CTV Series III connector with
standard solid metal-to-metal coupling, EMI
grounding n gers and conductive nishes
have proven to be the ultimate in EMI/EMP
shielding effectiveness. The charts illustrate
shielding effectiveness data which is typical
of Tri-Start connectors tested with the nickel
nish (Class F-metal, Class M-composite)
over a wide frequency range.
The vibration capability of the Tri-Start Series
is shown in the chart below. This illustrates
the most severe vibration envelope of any
qualied connec tor available today.
These capabilities along with a +200°C,
-65°C temperature rating and superior
moisture sealing protection pro vide the user
with a connector that can withstand the most
rigorous application.
TRI-START
VIBRATION CRITERIA
140
120
100
80
60
40
20
0
100 200 300 400 500 600 700800
NICKEL CLASS F, CLASS M
TYPICAL SHIELD EFFECTIVENESS DATA
FREQUENCY MEGAHERTZ
NICKEL CLASS F, CLASS M
MIL-DTL-38999 REQUIREMENTS
LEAKAGE dB
140
120
100
80
60
40
20
012345
NICKEL CLASS F, CLASS M
MIL-DTL-38999 REQUIREMENTS
NICKEL CLASS F, CLASS M
TYPICAL SHIELD EFFECTIVENESS DATA
678910
FREQUENCY GIGAHERTZ
LEAKAGE dB
550 500 5000
.0001
.001
.01
.1
1.
10.
10in/sec
.06 in DA.
3 axes @ – 55 C
ambient + 200 C*
60 G's
(Fail Safe: 3 axes
@ ambient
30 G's)
2 axes @
200 C *
(Fail Safe:
2 axes @
ambient)
2 axes @ ambient
6dB/octave
HERTZ
DOUBLE AMPLITUDE
(IN) SINE VIBRATION
POWER SPECTRAL
DENSITY (G2/HZ)
RANDOM VIBRATION
POWER SPECTRAL DENSITY G2/HZ
˚
˚
˚
MIL-DTL-38999, Series III TV, HD
Test Data
37
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
III
SJT
I
II
Access
Aquacon
Series III
A
MIL-DTL-38999, Series III TV
Weight Comparisons (Composite vs. Metal)
Depending on the shell style, shell size and contact count, weight savings can range from
17% to 40% compared to standard aluminum product.
Tri-Start Weight in Ounces (includes contacts)
WEIGHT
Wall Mount Receptacle (00) + Military
D38999/20
Jam Nut Receptacle (07) + Military D38999/24 Plug (06) + Military D38999/26
Stainless
Steel
Aluminum Composite Stainless Aluminum Composite Stainless Steel Aluminum Composite
Pin Socket Pin Socket Pin Socket Pin Socket Pin Socket Pin Socket Pin Socket Pin Socket Pin Socket
9-35 .7216 .7840 .3248 .3777 .2588 .3121 1.1472 1.2096 .4416 .5040 .3489 .4413 1.0736 1.1360 .4236 .4625 .2606 .2994
9-98 .7216 .7776 .2496 .3056 .1664 .2224 1.1472 1.2032 .4416 .4976 .3744 .4640 1.0736 1.1296 .3968 .4624 .2991 .2337
11-35 .9488 1.0800 .3632 .4960 .2753 .4081 1.4304 1.5632 .5936 .7264 .4679 .6007 1.2480 1.3808 .5312 .6389 .3450 .4582
11-98 .9488 1.0620 .3632 .4768 .2753 .3889 1.4304 1.5440 .5936 .7072 .4679 .5815 1.2480 1.3616 .5330 .6283 .3468 .4457
13-8 1.2096 1.3888 .4800 .6592 .3696 .5488 1.9104 2.0896 .7664 .9456 .6560 .8352 1.8048 1.9840 .7936 .9728 .5237 .5952
13-35 1.2160 1.4320 .4864 .7024 .3762 .5922 1.9168 2.1328 .7728 .9888 .6136 .8296 1.8112 2.0272 .8000 .8472 .5301 .6531
13-98 1.2160 1.4016 .4864 .6720 .3762 .5618 1.9168 2.1024 .7728 .9584 .6136 .7992 1.8112 1.9968 .7978 .9856 .5244 .7157
15-5 1.5312 1.7904 .6352 .8944 .5027 .7619 2.3792 2.6384 .9728 1.2320 .7749 1.0341 2.2704 2.5456 .9632 1.1719 .6450 .8467
15-18 1.5456 1.8416 .7760 .9456 .6432 .8128 2.3936 2.6896 .9872 1.2832 .8544 1.1504 2.2848 2.5808 .9776 1.2736 .6594 .8208
15-35 1.5424 1.8768 .6464 .9808 .5139 .8483 2.3904 2.7344 .9840 1.3280 .7861 1.1301 2.2816 2.6256 1.2179 1.3184 .8961 1.0002
17-6 2.1488 2.5904 .9360 1.3776 .7812 1.2228 2.9152 3.3568 1.2336 1.6752 .9940 1.4356 2.5008 3.1024 1.1408 1.7424 .8160 1.4176
17-26 2.1344 2.5600 .9216 1.3472 .7668 1.1924 2.9008 3.3264 1.2192 1.6448 .9796 1.4052 2.4864 2.9120 1.1264 1.3343 .8017 .8062
17-35 2.1360 2.6640 .9232 1.4512 .7684 1.2964 2.9024 3.4304 1.2208 1.7488 .9812 1.5092 2.4880 3.0160 1.1280 1.5497 .8033 1.2144
19-11 2.2592 2.6656 .9696 1.4528 .7925 1.2757 3.4352 3.9184 1.4720 1.9552 1.2033 1.6865 2.9808 3.4640 1.3472 1.8304 .9632 1.4464
19-32 2.1888 2.7264 .9760 1.5136 .7989 1.3365 3.4416 3.9792 1.4784 2.0160 1.2097 1.7473 2.9872 3.5248 1.3536 1.8912 .9696 1.5072
19-35 2.1920 2.8432 .9792 1.6304 .8021 1.4533 3.4448 4.0960 1.4816 2.1328 1.2129 1.8641 2.9904 3.6416 1.3568 2.0080 .9728 1.6240
21-11 2.7456 3.4640 1.3088 2.0272 1.1088 1.8272 3.9712 4.6896 1.8128 2.5312 1.6128 2.3312 3.4448 4.1632 1.7344 2.5312 1.3039 1.8710
21-16 2.6784 3.3168 1.2416 1.8800 1.0422 1.6806 3.9040 4.5424 1.7456 2.3840 1.4505 2.0889 3.3776 4.0160 1.6672 2.3168 1.2352 1.8736
21-35 2.6672 3.4992 1.2304 2.0624 1.0310 1.8630 3.8928 4.7248 1.7344 2.5664 1.4393 2.2713 3.3664 4.1984 1.6560 2.2309 1.2255 1.8003
21-41 2.6768 3.3600 1.2400 1.9232 1.0406 1.7238 3.9024 4.5856 1.7440 2.4272 1.4489 2.1321 3.3760 3.5792 1.6656 1.8688 1.2336 1.4368
23-21 3.0352 3.8624 1.4496 2.2768 1.2279 2.0551 4.2368 5.0640 1.9440 2.7712 1.6368 2.4640 3.7920 4.6192 1.9216 2.7488 1.4637 2.2896
23-35 3.0240 4.0448 1.4384 2.4592 1.2167 2.2375 4.2256 5.2464 1.9328 2.9536 1.6256 2.6464 3.7808 4.8016 1.9104 2.6087 1.4525 2.1507
23-53 2.8992 3.9072 1.4560 2.4816 1.2343 2.2599 4.2432 5.1088 1.9504 2.8160 1.6432 2.5088 3.7984 4.6640 1.9280 2.7936 1.4672 2.2384
25-4 3.4512 4.4800 1.7312 2.8816 1.4864 2.1904 4.8048 5.8272 2.2016 3.2480 1.9568 2.8720 4.2224 5.2496 2.2128 3.2560 1.7133 2.4163
25-19 3.5312 4.7264 1.8112 3.0064 1.5664 2.7616 4.8848 6.0816 2.2816 3.4784 2.0368 3.2336 4.3024 5.4992 2.2928 3.4896 1.7933 2.7058
25-20 3.8190 4.7150 2.0173 3.1125 1.7733 2.8512 5.1430 6.0380 2.4877 3.5421 2.1872 3.2416 4.4350 5.3300 2.2580 3.0182 1.8288 2.8928
25-35 3.4416 4.6656 1.7216 2.9456 1.4776 2.7016 4.7952 6.0192 2.1920 3.4160 1.8915 3.1155 4.2128 5.4368 2.2032 3.4272 1.7037 2.9277
25-61 3.4304 4.4848 1.7282 2.7648 1.4841 2.5208 4.7840 5.8384 2.1808 3.2352 1.8803 2.9347 4.2016 5.2560 2.1920 3.2464 1.6912 2.7456
All weight measurements are for reference only.
38 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
III
SJT
38999
I
II
Access
Aquacon
Series III
A
The Dualok represents the latest in high performance connector
designs from Amphenol. Featuring a newly developed locking
mechanism, the Dualok plug ensures rock-solid coupling and
metal-to-metal bottoming in the most severe
vibration environments.
DUALOK FEATURES AND BENEFITS
INCLUDE:
Mates with standard D38999 receptacles and utilizes standard
D38999 inserts.
Designed to withstand and stay mated under vibration levels
that exceed MIL-DTL-38999 levels
Dualok stainless steel provides a weight savings of up to 42%
compared to standard D38999 stainless steel designs
Stainless steel, aluminum, composite, or aluminum bronze
materials of construction
Dualok aluminum provides ~ 10% weight reduction over
D38999 Aluminum
Coupling mechanism that does not “settle” under vibration
levels exceeding MIL-DTL-38999
Metal-to-metal bottoming for maximum EMI shielding
under extreme vibration
New High Vibration
Dualok Connector
High Vibration Dualok, 38999 Series III Type
Features and Benefits
0
5
10
15
25
20
30
35
D38999 S/S
Clutch-Lok Dualok S/S Dualok Alum.
Grams
Weight Comparison
Size #9 (Less Inserts)
The Tri-Start option CLUTCH-LOK offers all advantages of
stainless steel/Class K rewall for MIL-DTL-38999 Series III
connectors, plus a unique clutch design that actually tightens itself
under vibration.
Features include:
High degree of differential torque
No settling back to the next ratchet tooth
Completely intermateable with all existing MIL-DTL-38999
Series III connectors
Offers advantage in inaccessible, hard to reach areas where
mating torque is difcult to apply and complete coupling is not
veriable by inspection
See page 34 for description,
44 – 46 for ordering.
CLUTCH-LOKTM
MIL-DTL-38999, SERIES III
HIGH VIBRATION CONNECTOR
OPTIONAL SHELL GEOMETRIES
Amphenol offers a number of different shell
congurations to t your needs
Deep Reach Shells - For increased panel thickness
Stand-off Flange Shells - For attachments to Printed Circuit Boards.
Connector with Integral Strain Reliefs
39
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
III
SJT
I
II
Access
Aquacon
Series III
A
ELECTRICAL:
22 AWG: 5.0 AMPS
24 AWG: 3.0 AMPS
26 AWG: 2.0 AMPS
28 AWG: 1.5 AMPS
Insulation Resistance: 5000 megohms min.@500 VDC 25C
Dielectric Withstanding Voltage: 1000 VRMS@sea level
TECHNICAL DATA
HD38999 series was designed to meet and/or exceed the specications of MIL-DTL-38999. The connector series has been tested to all the
requirements of 38999 with the use of AS39029 size 23 contacts. Test reports are available upon request. The following is a summary of
some of the performance requirements.
MECHANICAL:
Metallic Shells: Material: Aluminum alloy, Stainless Steel
Protection: Electroless Nickel, O.D. Cadmium,
Durmalon (Nickel PTFE), Zinc Nickel
Composite Shells: Material: Thermoplastic
Protection: Electroless Nickel, O.D. Cadmium,
Durmalon (Nickel PTFE), Zinc Nickel
Contacts: Material: Copper Alloy
Protection: Gold over Nickel
Insert Retention
to Shell: 100 psi in axial load
Durability: 500 full mating and unmating cycles
Vibration: 60G sine per MIL-DTL-38999L Para 4.5.23.2.1
5G2 Random per EIA-364-28E, Test condition A
1G2 Random per EIA-364-28E, Test condition I
Shock: Per EIA-364-27B, 300g
ENVIRONMENTAL:
Operating
Temperature: –65°C to +175°C
Salt Spray:
Metallized: Electroless Nickel: 48 hours
Anodic Coating, O. D. Cadmium, Durmalon,
Zinc Nickel: 500 hours
Salt Spray
Composite: Electroless Nickel: 1000 hours
O. D. Cadmium, Durmalon, Zinc Nickel: 500 hours
140
120
100
80
60
40
20
0
100 200 300 400 500 600 700800
NICKEL CLASS F, CLASS M
TYPICAL SHIELD EFFECTIVENESS DATA
FREQUENCY MEGAHERTZ
NICKEL CLASS F, CLASS M
MIL-DTL-38999 REQUIREMENTS
LEAKAGE dB
EMI SHIELDING EFFECTIVENESS:
Solid metal to metal coupling, EMI grounding ngers
and conductive nishes have proven to be the
ultimate in EMI/EMP shielding effectiveness. The
following chart illustrated shielding effectiveness data
which is typical in HD38999 connectors.
140
120
100
80
60
40
20
012345
NICKEL CLASS F, CLASS M
TYPICAL SHIELD EFFECTIVENESS DATA
NICKEL CLASS F, CLASS M
MIL-DTL-38999 REQUIREMENTS
678910
FREQUENCY GIGAHERTZ
LEAKAGE dB
High Density Interconnects
HD38999: 9 to 187 Contacts
H38999
High Density
The HD38999 family of connectors has 30% more contact
density than the highest density Mil Spec 38999 connectors
of its size. This series of connectors was designed to utilize
mil-specied 38999 components with the exception of the
contacts and inserts arrangement. Utilizing existing mil-qualied
39029 size 23 contacts and 38999 insert materials, these
connectors are essentially a drop-in replacement for the
standard 38999 connector.
This connector design benets users in a couple of different ways.
For those users who need to increase the amount of contacts in
their application, the HD38999 series allows them to do so without increasing the size of their connector.
For users who are looking to decrease the overall size of their system, they can do so by using smaller shell sizes without
decreasing the number of contacts.
Amphenol has qualied this series of connectors to the requirements of MIL-DTL-38999. Amphenol also manufacturers this high
density series in Filter, Hermetic and customized versions to t our customer’s needs. Please contact us if additional information is required.
40 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
III
SJT
38999
I
II
Access
Aquacon
Series III
A
H38999
High Density
HD38999 FOR GIGABIT ETHERNET APPLICATIONS
The HD38999 is available for high speed (Gigabit Ethernet) data transmission
in the size 9-9 insert pattern.
Data transmission performance of this connector insert:
10 Base T, 100 Base TX, and 1000 Base T networks using Cat 5e per TIA/EIA568B
and Class D per ISO/IEC 11801.
(Test report available - consult Amphenol Aerospace for more information)
Signal-Ground Pin Configuration
Wiring Recommendations
View Rear of Connector
8
2
3
1
97
5
4
6
Blue
White/Blue
White/Green
Ground/or
cavity not used
Green
White/Brown
Brown
White/Orange
Orange
NEW CUSTOM DESIGNED HD38999 CONNECTORS -
PROVIDE MORE INTERCONNECT SOLUTIONS:
HD38999 Connector with 9-9
Insert Pattern (Rear View)
ALIGNMENT DISKS
Alignment disks keep contacts
aligned for easier insertion into circuit
boards. These are typically ordered
with the connector - see step 7 of
How to Order on page 47.
FILTERED HD38999 CONNECTORS -
FOR EMI/EMP PROTECTION
High density patterns are available in lter 38999
connectors - consult Amphenol Aerospace for ordering.
Shell
Size
D Dia.
±.010
9 .234
11 .350
13 .500
15 .725
17 .750
19 .850
21 .953
23 1.147
25 1.250
D
DIA.
.032
±.00
5
Custom Designed HD38999 Connectors and
Alignment Disks
41
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
III
SJT
I
II
Access
Aquacon
Series III
A
Now you can build a part number for Military and Commercial
MIL-DTL-38999 Series III through our online congurator,
located on the home page of www.amphenol-aerospace.com.
MIL-DTL-38999, Series III TV, Configurator
Online at www.amphenol-aerospace.com
After building a part number, you have the option to download the drawing and
specications, buy if available through distribution channels, Request a Quote and
the ability to download multiple part numbers to a list to manage your needs.
42 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
III
SJT
38999
I
II
Access
Aquacon
Series III
A
Military to Commercial Shell Style Conversion Table
How to Order (Military)
1. 2. 3. 4. 5. 6.
Connector
Type
Shell
Style
Service
Class
Shell Size– Insert
Arrangement
Contact
Type
Alternate Keying
Position
D38999/ 20 J G35 P N
2. SHELL STYLE
20 Wall Mount Receptacle
21 Box Mount Receptacle Hermetic
26 Straight Plug
24 Jam Nut Receptacle
23 Jam Nut Receptacle Hermetic
25 Solder Mount Receptacle Hermetic
27 Weld Mounted Receptacle,
(Hermetic) Only
1. CONNECTOR TYPE
38999/ MIL-DTL-38999 III
3. SERVICE CLASS
Military Finish RoHS Material Material/ Description
C Anodic
Coating Aluminum 200°C, 500 hour salt spray
FElectroless Nickel Aluminum 200°C, EMI shielding –65dB @ 10GHz, 48 hour salt spray
GElectroless Nickel Aluminum 200°C, Space grade, 48 hour salt spray
JOlive Drab Cadmium Composite 175°C, 2000 hours dynamic salt spray, EMI Shielding –50 dB@10 GHz
specication min.
KPassivated Stainless Steel Stainless Steel 200°C, rewall capability, 500 hour salt spray resistance, EMI –45 dB @ 10 GHz
specication min.
LStainless Steel w/
Nickel Plate Stainless Steel Corrosion resistant steel, 200°C, 500 hour salt spray, , non rewall, EMI
shielding –65dB @ 10GHz specication min.
MElectroless Nickel Composite 200°C, EMI shielding –65dB @ 10GHz, 2000 hours dynamic salt spray
NStainless Steel w/
Nickel Plate Stainless Steel Hermetic connectors,
corrosion resistant steel, 200°C
SStainless Steel w/
Nickel Plate Stainless Steel Non-hermetic connectors, corrosion resistant steel, 200°, rewall capability,
500 hour salt spray, EMI shielding –65dB @ 10GHz specication min.
TDurmalon plated Aluminum Nickel-PTFE alternative to Cadmium, 175°C, 500 hour salt spray, EMI -50dB at
10GHz specication min.
WOlive Drab Cadmium Aluminum 175°C , 500 hour salt spray, EMI Shielding –50 dB@10 GHz specication min.
YStainless Steel Stainless Steel Hermetic seal, 200°C passivated stainless steel
ZZinc-Nickel Plated Aluminum Zinc-Nickel Alternative to Cadmium, +175°C, 500 hour salt spray, EMI
Shielding –50 dB @ 10 GHz specication min.
MILITARY DESCRIPTION COMMERCIAL
D38999/20 Wall Mounting Receptacle TVP00 or TVPS00 (AL & SS);
CTVP00, CTVPS00 (Composite)
D38999/21 Hermetic Box Mounting Receptacle TVPS02Y, TVPS02YN
D38999/23 Hermetic Jam Nut Receptacle TVS07Y, TVS07YN
D38999/24 Jam Nut Receptacle TV07, TVS07 (AL & SS);
CTV00, CTVS00 (Composite)
D38999/26 Straight Plug TV06, TVS06
D38999/25 Solder Mount Receptacle (Hermetic) TVSI
D38999/27 Weld Mounted Receptacle (Hermetic) TVSHI
HOW TO ORDER: MILITARY
43
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
III
SJT
I
II
Access
Aquacon
Series III
A
MIL-DTL-38999, Series III TV
How to Order (Military)
4. SELECT A SHELL SIZE & INSERT
ARRANGEMENT SEE PAGES 2-5
Shell Size & Insert Arrangements are on
pages 2-5. First number represents
Shell Size, second number is the Insert
Arrangement.
Triple Start Threads
A B C D E F G H J Mil Shell
Size
9 11 13 15 17 19 21 23 25 Amphenol
Shell size
5. CONTACT TYPE
P500 Cycle Pin Contacts, if require Less Contacts place
(LC) at the end of part number
S500 Cycle Socket Contacts, if require Less Contacts place
(LC) at the end of part number
H1500 Pin Cycle Contacts
J1500 Socket Cycle Contacts
ALess Pin Contacts
BLess Socket Contacts
XEyelet contacts, hermetics only
6. ALTERNATE KEY POSITION
Key/Keyway Position
N A B C D E
KEY/KEYWAY POSITION
A plug with a given rotation letter will mate with a receptacle
with the same rotation letter. The angles for a given connector
are the same whether it contains pins or sockets. Master key
stays xed, minor keys rotate. Inserts are not rotated in
conjunction with the master key/keyway.
PLUG
(front face shown)
RECEPTACLE
(front face shown)
MAIN
KEYWAY
AP
BSC
BP
BSC
DP
BSC
CP
BSC
˚
˚
˚
˚
DR
BSC
˚CR
BSC
˚
BR
BSC
˚
AR
BSC
˚
MAIN
KEYWAY
Shell
Size
Key & Keyway
Arrangement
Identification
Letter
AR°
or
AP°
BSC
BR°
or
BP°
BSC
CR°
or
CP°
BSC
DR°
or
DP°
BSC
A (9)
N*
A
B
C
D
E
105
102
80
35
64
91
140
132
118
140
155
131
215
248
230
205
234
197
265
320
312
275
304
240
B (11)
C (13)
D (15)
N*
A
B
C
D
E
95
113
90
53
119
51
141
156
145
156
146
141
208
182
195
220
176
184
236
292
252
255
298
242
E (17)
F (19)
N*
A
B
C
D
E
80
135
49
66
62
79
142
170
169
140
145
153
196
200
200
200
180
197
293
310
244
257
280
272
G (21)
H (23)
J (25)
N*
A
B
C
D
E
80
135
49
66
62
79
142
170
169
140
145
153
196
200
200
200
180
197
293
310
244
257
280
272
44 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
III
SJT
38999
I
II
Access
Aquacon
Series III
A
Wall Mount
Receptacle
(00, 20)
Line
Receptacle
(01)
Box Mount
Receptacle
(02, 21)
Straight
Plug
(06)
Lanyard
Release Plug
(29, 30, 31)
Jam Nut
Receptacle
(07, 24)
Flange
Mounting Plug
(09)
Deep Reach
Receptacle
Consult
Amphenol
Aerospace
Solder Mount
Hermetic
Receptacle
(I, 25)
MIL-DTL-38999, Series III TV
How to Order (Commercial)
1. SELECT A TYPE & CLASS
Insert arrangements using multi-axial (i.e. coax, twinax, triax shielded) contacts should not be used in rewall applications.
*Coaxial arrangements are not available in rewall classes.
ALUMINUM
Electroless
Nickel
Olive Drab
Cadmium
Durmalon Black Zinc Electroless Nickel
(With Ground
Plane)
Olive Drab
Cadmium
(With Ground
Plane)
Marine
Bronze
RATES
Temperature 200˚C 175˚C 175˚C 175˚C 200˚C 175˚C 200˚C
Salt Spray 48 Hrs 500 Hrs 500 Hrs 500 Hrs 48 Hrs 500 Hrs 2,000 Hrs
EMI Shielding -65dB @
10GHz
-65dB @
10GHz
-50dB @
10GHz
-50dB @
10GHz -65dB @ 10GHz -65dB @
10GHz
-65dB @
10GHz
RoHS
R
o
H
S
A
m
p
h
e
n
o
l
E
U
/
2
0
0
2
/
9
5
/
E
C
R
o
H
S
A
m
p
h
e
n
o
l
E
U
/
2
0
0
2
/
9
5
/
E
C
R
o
H
S
A
m
p
h
e
n
o
l
E
U
/
2
0
0
2
/
9
5
/
E
C
R
o
H
S
A
m
p
h
e
n
o
l
E
U
/
2
0
0
2
/
9
5
/
E
C
CONNECTOR TYPE & STYLE
Receptacle
Wall Mounting Receptacle TVPS00RF- TVP00RW- TVP00DT- TVP00DZ- TVP00RGF- TVP00RGW- TVPS00RB-
Box Mounting Receptacle TVPS02RF- TVP02RW- TVP02DT- TVP02DZ- TVP02RGF- TVP02RGW- TVPS02RB-
Line Receptacle TVS01RF- TV01RW- TV01DT- TV01DZ- TV01RGF- TV01RGW- TVS01RB-
Jam Nut Receptacle TVS07RF- TV07RW- TV07DT- TV07DZ- TV07RGF- TV07RGW- TVS07RB-
Plugs
Straight Plug TVS06RF- TV06RW- TV06DT- TV06DZ- TV06RGF- TV06RGW- TVS06RB-
Flange Mounted Plug TVS09RF- TV09RW- TV09DT- TV09DZ- TV09RGF- TV09RGW- TVS09RB-
Straight Plug w Dualok TVS56RF- TV56RW- TV56DT- TV56DZ- TV56RGF- TV56RGW- TVS56RB-
Straight Plug w Clutch-Lok* - - - - - - -
Printed Circuit Board
Wall Mounting Receptacle TVPS00RF- TVP00RW- TVP00DT- TVP00DZ- - - TVPS00RB-
Box Mounting Receptacle TVPS02RF- TVP02RW- TVP02DT- TVP02DZ- - - TVPS02RB-
Jam Nut TVS07RF- TV07RW- TV07DT- TV07DZ- - - TVS07RB-
Wall Mount (Double Flange) TVPS40RF- TVP40RW- TVP40DT- TVP40DZ- - - TVPS40RB-
Jam Nut (Double Flange) TVS47RF- TV47RW- TV47DT- TV47DZ- - - TVS47RB-
Wall Mount (Clinch Nuts) TVPS10RF- TVP10RW- TVP10DT- TVP10DZ- - - TVPS10RB-
Box Mount (Clinch Nuts) TVPS12RF- TVP12RW- TVP12DT- TVP12DZ- - - TVPS12RB-
Hermetic
Box Mounting Receptacle
Hermetic only available in Stainless Steel
Jam Nut Receptacle
Solder Mount
Wall Mounting Receptacle
1. 2. 3. 4. 5.
Type & Class Shell Size-
Insert Arrg.
Contact Type Alternate
Position
PCB
Length**
TVPS00RB- P
* Stamped with Mil-Spec #D38999
** If Required
45
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
III
SJT
I
II
Access
Aquacon
Series III
A
MIL-DTL-38999, Series III TV
How to Order (Commercial)
COMPOSITE STAINLESS STEEL
Electroless
Nickel
Olive Drab
Cadmium
Electroless
Nickel
(With Ground
Plane)
Olive Drab
Cadmium
(With Ground
Plane)
Passivated
(Firewall)
Passivated
(Non-Firewall)
Nickel
Plated
(Firewall)
Nickel Plated
(Non-Firewall)
200˚C 175˚C 200˚C 175˚C 200˚C 200˚C 200˚C 200˚C
2,000 Hrs 2,000 Hrs 2,000 Hrs 2,000 Hrs 500 Hrs 500 Hrs 500 Hrs 500 Hrs
-65dB @ 10GHz -65dB @
10GHz -65dB @ 10GHz -65dB @
10GHz
-65dB @
10GHz
-65dB @
10GHz
-65dB @
10GHz
-50dB @
10GHz
R
o
H
S
A
m
p
h
e
n
o
l
E
U
/
2
0
0
2
/
9
5
/
E
C
R
o
H
S
A
m
p
h
e
n
o
l
E
U
/
2
0
0
2
/
9
5
/
E
C
R
o
H
S
A
m
p
h
e
n
o
l
E
U
/
2
0
0
2
/
9
5
/
E
C
R
o
H
S
A
m
p
h
e
n
o
l
E
U
/
2
0
0
2
/
9
5
/
E
C
R
o
H
S
A
m
p
h
e
n
o
l
E
U
/
2
0
0
2
/
9
5
/
E
C
R
o
H
S
A
m
p
h
e
n
o
l
E
U
/
2
0
0
2
/
9
5
/
E
C
CTVPS00RF- CTVP00RW- CTVP00RGF- CTVP00RGW- TVPS00RK- TVPS00RKN- TVPS00RS- TVPS00RL-
CTVPS02RF- CTVP02RW- CTVP02RGF- CTVP02RGW- TVPS02RK- TVPS02RKN- TVPS02RS- TVPS02RL-
CTVS01RF- CTV01RW- CTV01RGF- CTV01RGW- TVS01RK- TVS01RKN- TVS01RS- TVS01RL-
CTVS07RF- CTV07RW- CTV07RGF- CTV07RGW- TVS07RK- TVS07RKN- TVS07RS- TVS07RL-
CTVS06RF- CTV06RW- CTV06RGF- CTV06RGW- TVS06RK- TVS06RKN- TVS06RS- TVS06RL-
CTVS09RF- CTV09RW- CTV09RGF- CTV09RGW- TVS09RK- TVS09RKN- TVS09RS- TVS09RL-
CTVS56RF- CTV56RW- CTV56RGF- CTV56RGW- TVS56RK- TVS56RKN- TVS56RS- TVS56RL-
- - - - MTVS26RK- - - -
TVPS00RK- TVPS00RKN- TVPS00RS- TVPS00RL-
TVPS02RK- TVPS02RKN- TVPS02RS- TVPS02RL-
TVS07RK- TVS07RKN- TVS07RS- TVS07RL-
TVPS40RK- TVPS40RKN- TVPS40RS- TVPS40RL-
TVS47RK- TVS47RKN- TVS47RS- TVS47RL-
TVPS10RK- TVPS10RKN- TVPS10RS- TVPS10RL-
TVPS12RK- TVPS12RKN- TVPS12RS- TVPS12RL-
Hermetic only available in Stainless Steel
- TVPS02Y- - TVPS02YN-
- TVS07Y- - TVS07YN-
- TVSIY- - TVSIYN-
- TVSHIY- - TVSHIYN-
2. SELECT A SHELL SIZE & INSERT
ARRANGEMENT SEE PAGES 2-5
Shell Size & Insert Arrangements are on pages
2-5. First number represents Shell Size, second
number is the Insert Arrangement.
* Size 7 and 7H are Double Start Threads only
3. CONTACT TYPE
P500 Cycle Pin Contacts, if require Less Contacts place (LC) at
the end of part number
S500 Cycle Socket Contacts, if require Less Contacts place (LC)
at the end of part number
H1500 Cycle Pin Contacts
J1500 Cycle Socket Contacts
XEyelet contacts, hermetics only
1. 2. 3. 4. 5.
Type & Class Shell Size-
Insert Arrg.
Contact Type Alternate
Position
PCB
Length**
TVPS00RB- 11-4 P
** If Required
Contact
Stickout
Pin
Contacts
Pin Contacts
with Alignment
Disk
.150” (P15) (P15AD)
.250” (P25) (P25AD)
.350” (P35) (P35AD)
Contact
Stickout
Socket
Contacts
Socket
Contacts with
Alignment Disk
.150” (S15) (S15AD)
.250” (S25) (S25AD)
.350” (S35) (S35AD)
46 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
III
SJT
38999
I
II
Access
Aquacon
Series III
A
4. SELECT A ALTERNATE KEYING
COMMERCIAL
KEY/KEYWAY POSITION
A plug with a given rotation letter will mate with a receptacle
with the same rotation letter. The angles for a given connector
are the same whether it contains pins or sockets. Master key
stays xed, minor keys rotate. Inserts are not rotated in
conjunction with the master key/keyway.
PLUG
(FRONT FACE SHOWN)
RECEPTACLE
(FRONT FACE SHOWN)
MAIN
KEYWAY
AP
BSC
BP
BSC
DP
BSC
CP
BSC
˚
˚
˚
˚
DR
BSC
˚
CR
BSC
˚
BR
BSC
˚
AR
BSC
˚
MAIN
KEYWAY
5. PCB LENGTH FOR COMMERCIAL ONLY
* An “N” designation is used on D38999 military
part number but not on the commercial versions
1. 2. 3. 4. 5.
Type & Class Shell Size-
Insert Arrg.
Contact Type Alternate
Position
PCB
Length**
TVPS00RB- 11-4 P N
MIL-DTL-38999, Series III TV
How to Order (Alternate Keying) Commercial
5. PCB LENGTH FOR HD38999 ONLY
9-9, 11-19, 13-32, 15-55, 17-73, 19-88, 21-121, 23-151, 25-187
* Not available in TV40 wall mount double ange receptacle or TV47
jam nut double ange receptacle styles.
Note: Standard tail diameter is 0.019±.001 Stick out is measured from
the end of the connector shell to end of the contact
Shell
Size
D Dia.
±.010
9 .234
11 .350
13 .500
15 .725
17 .750
19 .850
21 .953
23 1.147
25 1.250
D
DIA.
.032
±.00
5
Alignment Disc
PCB tail stickout
+/-.040 inch
Without Alignment
Disk
With Alignment
Disc
Pins Sockets Pins Sockets
.100” nominal (P1*) (S1) (P1AD) (S1AD)
.150” nominal (P15*) (S15) (P15AD) (S15AD)
.200” nominal (P2) (S2) (P2AD) (S2AD)
.250” nominal (P25*) (S25) (P25AD) (S25AD)
.300” nominal (P3*) (S3) (P3AD) (S3AD)
.350” nominal (P35) (S35) (P35AD) (S35AD)
** If Required
Shell
Size
Key & Keyway
Arrangement
Identification
Letter
AR° or
AP°
BSC
BR°
or
BP°
BSC
CR°
or
CP°
BSC
DR°
or
DP°
BSC
7,
7H
N* 120 240
NA NA
A132 248
B80 230
C140 275
D155 234
E131 197
9
N* 105 140 215 265
A102 132 248 320
B80 118 230 312
C35 140 205 275
D64 155 234 304
E91 131 197 240
11,
13,
and
15
N* 95 141 208 236
A113 156 182 292
B90 145 195 252
C53 156 220 255
D119 146 176 298
E51 141 184 242
17
and
19
N* 80 142 196 293
A135 170 200 310
B49 169 200 244
C66 140 200 257
D62 145 180 280
E79 153 197 272
21,
23,
and
25
N* 80 142 196 293
A135 170 200 310
B49 169 200 244
C66 140 200 257
D62 145 180 280
E79 153 197 272
25L,
33,
and
37
N* 80 142 188 293
A135 170 188 310
B49 169 188 244
C66 140 188 257
D62 145 188 280
E79 153 188 272
47
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
III
SJT
I
II
Access
Aquacon
Series III
A
1. 2. 3. 4. 5. 6. 7. 8.
Boeing Basic
Number
Style Shell Size Shell Finish &
Contact
Insert
Arrangement
Contact
Type
Alternate
Keying Position
Ordering
Option
BACC63 CT 15 19 P N H
HOW TO ORDER - BOEING BACC63 CT & CU
2. STYLE
CT Composite Plug
CU Composite Receptacle
4. SHELL FINISH & CONTACT
CCT Style Only. Cadmium
Plated, Grounded
DCadmium Plated, ungrounded
GNickel Plated, Grounded
Nickel Plated, Ungrounded
6. CONTACT TYPE
PPin
SSocket
1. 2. 3. 4. 5. 6.
Boeing Basic
Number
Style Shell Size-
Insert
Arrangement
Contact
Type
Alternate
Keying Position
Ordering
Option
BACC63 DB 15-19 P N H
BACC63 DC 17-8 P N H
HOW TO ORDER - BOEING BACC63 DB & DC
2. SELECT A STYLE
DB Stainless Steel Plug
DC Stainless Steel Receptacle
4. CONTACT TYPE
PPin
SSocket
6. ORDERING OPTION
HWithout Contacts & Seal Plugs
Blank With Contacts & Seal Plugs
8. ORDERING OPTIONS
HWithout Contacts & Seal Plugs
Blank With Contacts & Seal Plugs
7. ALTERNATE KEYING POSITION
NNormal
A-E Alternates
3. SHELL SIZE
15 One Shell Size
5. ALTERNATE KEYING POSITION
NNormal
A-E Alternates
Boeing BACC63
How to Order
COMPOSITE
STAINLESS STEEL
5. INSERT ARRANGEMENTS-
Consult Amphenol Aerospace for insert
arrangements available.
3. SELECT A SHELL SIZE &
INSERT ARRANGEMENT
SEE PAGES 2-5
Shell Size & Insert Arrangements are on
pages 2-5. First number represents Shell
Size, second number is the Insert
Arrangement. Please include the dash.
1. BOEING NUMBER
BACC63 Boeing
1. BOEING NUMBER
BACC63 Boeing
48 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
III
SJT
38999
I
II
Access
Aquacon
Series III
A
M
M
.005
.13
T
4 PLACES
TT
4 PLACES
S
2 PLACES
2 PLACES
2 PLACES
R
1
R
2
V THREAD
AA
B
THREAD
LL (TV)
LL (CTV)
1
M (TV)
M (CTV)
1
L (TV)
L (CTV)
1
1.240 MAX
31.50 MAX
RED
BAND
BLUE
BAND†† –A–
Z (TV)
Z (CTV)
1
.861 MAX
21.87 MAX
(TV)
.909 MAX
23.09 MAX
(CTV)
1.037 MAX
26.34 MAX
(TV)
1.084 MAX
27.53 MAX
(CTV)
D
VIEW D
FOR SIZE 8 TWINAX ONLY,
RELATIVE TO
VIEW D
FOR SIZE 8 COAXIAL ONLY,
RELATIVE TO
–A–
–A–
Red band indicates fully mated
†† Blue band indicates rear release contact retention system
Millimeters
Inches
All dimensions for reference only Designates true position dimensioning
BACK PANEL
MOUNTING
FRONT PANEL
MOUNTING
A
1
A
2
PANEL HOLE
DIMENSIONS
Wall Mounting Receptacle
Military (D38999/20), Commercial (TVP00, TVPS00, CTVP00, CTVPS00)
Shell
Size
MS
Shell
Size
Code
B Thread
Class 2A
0.1P=0.3L-
TS (Plated)
L
Max.
(TV)
L1
Max.
(CTV)
M
+.000
–.005
(TV)
M1
+.000
–.005
(CTV)
R1R2
S
Max.
T
±.008
Z.
Max.
(TV)
Z1
Max.
(CTV)
A1 Back
Panel
Mount
A2 Front
Panel
Mount
AA Max.
Panel
Thickness
LL
+.006
–.000
(TV)
LL1
±.005
(CTV)
TT
±.008
9 A .6250 .469 .514 .820 .773 .719 .594 .948 .128 .153 .198 .655 .516 .234 .905 .908 .216
11 B .7500 .469 .514 .820 .773 .812 .719 1.043 .128 .153 .198 .796 .625 .234 .905 .908 .194
13 C .8750 .469 .514 .820 .773 .906 .812 1.137 .128 .153 .198 .922 .750 .234 .905 .908 .194
15 D 1.0000 .469 .514 .820 .773 .969 .906 1.232 .128 .153 .198 1.047 .906 .234 .905 .908 .173
17 E 1.1875 .469 .514 .820 .773 1.062 .969 1.323 .128 .153 .198 1.219 1.016 .234 .905 .908 .194
19 F 1.2500 .469 .514 .820 .773 1.156 1.062 1.449 .128 .153 .198 1.297 1.141 .234 .905 .908 .194
21 G 1.3750 .500 .545 .790 .741 1.250 1.156 1.575 .128 .183 .228 1.442 1.266 .204 .905 .904 .194
23 H 1.5000 .500 .545 .790 .741 1.375 1.250 1.701 .154 .183 .228 1.547 1.375 .204 .905 .904 .242
25 J 1.6250 .500 .545 .790 .741 1.500 1.375 1.823 .154 .183 .228 1.672 1.484 .204 .905 .904 .242
Shell
Size
MS
Shell
Size
Code
L Max.
(TV)
L1
Max.
(CTV)
M +.00
–.13
(TV)
M1
+.00
–.13
(CTV)
R1R2
S
Max.
T
±.20
V Thread
Metric
Z.
Max.
(TV)
Z1 Max.
(CTV)
A1 Back
Panel
Mount
A2 Front
Panel
Mount
AA
Max.
LL
+.15
–.00
(TV)
LL1
±.13
(CTV)
TT
±.20
9 A 11.91 13.06 20.83 19.63 18.26 15.09 24.1 3.25 M12X1-6g 3.89 5.03 16.66 13.11 5.94 22.99 23.06 5.49
11 B 11.91 13.06 20.83 19.63 20.62 18.26 26.5 3.25 M15X1-6g 3.89 5.03 20.22 15.88 5.94 22.99 23.06 4.93
13 C 11.91 13.06 20.83 19.63 23.01 20.62 28.9 3.25 M18X1-6g 3.89 5.03 23.42 19.05 5.94 22.99 23.06 4.93
15 D 11.91 13.06 20.83 19.63 24.61 23.01 31.3 3.25 M22X1-6g 3.89 5.03 26.59 23.01 5.94 22.99 23.06 4.39
17 E 11.91 13.06 20.83 19.63 26.97 24.61 33.7 3.25 M25X1-6g 3.89 5.03 30.96 25.81 5.94 22.99 23.06 4.93
19 F 11.91 13.06 20.83 19.63 29.36 26.97 36.9 3.25 M28X1-6g 3.89 5.03 32.94 28.98 5.94 22.99 23.06 4.93
21 G 12.70 13.84 20.07 18.82 31.75 29.36 40.1 3.25 M31X1-6g 4.65 5.79 36.12 32.16 5.18 22.99 22.96 4.93
23 H 12.70 13.84 20.07 18.82 34.93 31.75 43.3 3.91 M34X1-6g 4.65 5.79 39.29 34.93 5.18 22.99 22.96 6.15
25 J 12.70 13.84 20.07 18.82 38.10 34.93 46.4 3.91 M37X1-6g 4.65 5.79 42.47 37.69 5.18 22.99 22.96 6.15
ALUMINUM
TVPS00RF
TVP00RW
TVP00DT
TVP00DZ
TVP00RGF
TVP00RGW
TVPS00RB
PART NUMBER BUILDER Page 42-46
ONLINE CONFIGURATOR www.amphenol-aerospace.com
COMPOSITE
CTVPS00RF
CTVP00RW
CTVP00RGF
CTVP00RGW
STAINLESS STEEL
TVPS00RK
TVPS00RKN
TVPS00RS
TVPS00RL
MILITARY
D38999/20
Commercial
49
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
III
SJT
I
II
Access
Aquacon
Series III
A
Consult Amphenol Aerospace for availability of composite box mount receptacles.
Millimeters
Inches
M (TV)
M (CTV)
LL (TV)
LL (CTV)
1
1
AA
B
THREAD
BLUE
BAND
††
RED
BAND
L (TV)
L (CTV)
1
Z (TV)
Z (CTV)
1
M
M
.005
.13
T
4 PLACES
TT
4 PLACES
S
2 PLACES
2 PLACES
2 PLACES
R
1
R
2
Red band indicates fully mated
†† Blue band indicates rear release contact retention system
All dimensions for reference only Designates true position dimensioning
BACK PANEL
MOUNTING
FRONT PANEL
MOUNTING
A
1
A
2
PANEL HOLE
DIMENSIONS
Box Mounting Receptacle
Commercial (TVP02, TVPS02, CTVP02, CTVPS02)
Shell
Size
MS
Shell
Size
Code
B Thread
Class 2A
0.1P=0.3L-
TS (Plated)
L Max.
(TV)
L1
Max.
(CTV)
M
+.000
–.005
(TV)
M1
+.000
–.005
(CTV)
R1 R2 S
Max.
T
±.008
Z.
Max.
(TV)
Z1
Max.
(CTV)
A1
Back
Panel
Mount
A2
Front
Panel
Mount
AA Max.
Panel
Thickness
LL
+.006
–.000
(TV)
LL1
±.005
(CTV)
TT
±.008
9 A .6250 .205 .250 .820 .773 .719 .594 .948 .128 .153 .198 .650 .510 .234 .905 .908 .216
11 B .7500 .205 .250 .820 .773 .812 .719 1.043 .128 .153 .198 .800 .620 .234 .905 .908 .194
13 C .8750 .205 .250 .820 .773 .906 .812 1.137 .128 .153 .198 .910 .740 .234 .905 .908 .194
15 D 1.0000 .205 .250 .820 .773 .969 .906 1.232 .128 .153 .198 1.040 .900 .234 .905 .908 .173
17 E 1.1875 .205 .250 .820 .773 1.062 .969 1.323 .128 .153 .198 1.210 1.010 .234 .905 .908 .194
19 F 1.2500 .205 .250 .820 .773 1.156 1.062 1.449 .128 .153 .198 1.280 1.130 .234 .905 .908 .194
21 G 1.3750 .235 .280 .790 .741 1.250 1.156 1.575 .128 .183 .228 1.410 1.250 .204 .905 .904 .194
23 H 1.5000 .235 .280 .790 .741 1.375 1.250 1.701 .154 .183 .228 1.530 1.360 .204 .905 .904 .242
25 J 1.6250 .235 .280 .790 .741 1.500 1.375 1.823 .154 .183 .228 1.660 1.470 .204 .905 .904 .242
Shell
Size
MS
Shell
Size
Code
L Max.
(TV)
L1
Max.
(CTV)
M
+.00
–.13
(TV)
M1
+.00
–.13
(CTV)
R1R2S
Max.
T
±.20
Z.
Max.
(TV)
Z1
Max.
(CTV)
A1 Back
Panel
Mount
A2
Front
Panel
Mount
AA
Max.
LL +.15
–.00 (TV)
LL1
±.13
(CTV)
TT
±.20
9 A 5.21 6.35 20.83 19.63 18.26 15.09 24.1 3.25 3.89 5.03 16.66 13.11 5.94 22.99 23.06 5.49
11 B 5.21 6.35 20.83 19.63 20.62 18.26 26.5 3.25 3.89 5.03 20.22 15.88 5.94 22.99 23.06 4.93
13 C 5.21 6.35 20.83 19.63 23.01 20.62 28.9 3.25 3.89 5.03 23.42 19.05 5.94 22.99 23.06 4.93
15 D 5.21 6.35 20.83 19.63 24.61 23.01 31.3 3.25 3.89 5.03 26.59 23.01 5.94 22.99 23.06 4.39
17 E 5.21 6.35 20.83 19.63 26.97 24.61 33.7 3.25 3.89 5.03 30.96 25.81 5.94 22.99 23.06 4.93
19 F 5.21 6.35 20.83 19.63 29.36 26.97 36.9 3.25 3.89 5.03 32.94 28.98 5.94 22.99 23.06 4.93
21 G 5.97 7.11 20.07 18.82 31.75 29.36 40.1 3.25 4.65 5.79 36.12 32.16 5.18 22.99 22.96 4.93
23 H 5.97 7.11 20.07 18.82 34.92 31.75 43.3 3.91 4.65 5.79 39.29 34.93 5.18 22.99 22.96 6.15
25 J 5.97 7.11 20.07 18.82 38.10 34.92 46.4 3.91 4.65 5.79 42.47 37.69 5.18 22.99 22.96 6.15
ALUMINUM
TVPS02RF
TVP02RW
TVP02DT
TVP02DZ
TVP02RGF
TVP02RGW
TVPS02RB
PART NUMBER BUILDER Page 44-46
ONLINE CONFIGURATOR www.amphenol-aerospace.com
COMPOSITE
CTVPS02RF
CTVP02RW
CTVP02RGF
CTVP02RGW
STAINLESS STEEL
TVPS02RK
TVPS02RKN
TVPS02RS
TVPS02RL
Commercial
50 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
III
SJT
38999
I
II
Access
Aquacon
Series III
A
GG (TV)
GG (CTV)
1
S (TV)
S (CTV)
2 PLACES
1
B
THREAD
LL (TV)
LL (CTV)
1
1
M (TV)
M (CTV)
.280 MIN FULL THD
7.11 MIN FULL THD
L (TV)
L (CTV)
1
Z (TV)
Z (CTV)
1
1.240MAX
31.50 MAX
V THREAD
D
–A–
RED
BAND
†
BLUE
BAND
††
.861 MAX
21.87 MAX
(TV)
.909 MAX
23.09 MAX
(CTV)
1.037 MAX
26.34 MAX
(TV)
1.084 MAX
27.53 MAX
(CTV)
VIEW D
FOR SIZE 8 TWINAX ONLY,
RELATIVE TO
VIEW D
FOR SIZE 8 COAXIAL ONLY,
RELATIVE TO
–A–
–A–
Red band indicates fully mated
†† Blue band indicates rear release contact retention system
Millimeters
All dimensions for reference only
Inches
Line Receptacle
Commercial (TV01, TVS01, CTV01, CTVS01)
Shell Size
MS Shell
Size Code
B Thread
0.1P-0.3L-
TS-2A
(Plated)
M
+.000
–.005
(TV)
M1
+.000
–.005
(CTV)
L
Max.
(TV)
L1
Max.
(CTV)
S
±.010
(TV)
S1 ±.010
(CTV)
Z Max
(TV)
Z1 Max
(CTV)
GG
±.010
(TV)
GG1
±.010
(CTV)
LL
+.006
–.000
(TV)
LL1
±.005
(CTV)
9 A .6250 .820 .773 .469 .514 .675 .635 .153 .198 .812 .699 .905 .908
11 B .7500 .820 .773 .469 .514 .800 .765 .153 .198 .905 .875 .905 .908
13 C .8750 .820 .773 .469 .514 .925 .885 .153 .198 1.093 1.007 .905 .908
15 D 1.0000 .820 .773 .469 .514 1.050 1.100 .153 .198 1.219 1.140 .905 .908
17 E 1.1875 .820 .773 .469 .514 1.238 1.197 .153 .198 1.375 1.229 .905 .908
19 F 1.2500 .820 .773 .469 .514 1.300 1.260 .153 .198 1.469 1.380 .905 .908
21 G 1.3750 .790 .741 .500 .545 1.425 1.385 .183 .228 1.625 1.493 .905 .904
23 H 1.5000 .790 .741 .500 .545 1.550 1.510 .183 .228 1.750 1.626 .905 .904
25 J 1.6250 .790 .741 .500 .545 1.675 1.635 .183 .228 1.875 1.777 .905 .904
Shell Size
MS Shell
Size Code
M
+.00–.013
(TV)
M1
+.00
–.13
(CTV)
L Max.
(TV)
L1
Max.
(CTV)
S ±.25
(TV)
S1
±.010
(CTV)
V Thread
Metric
Z Max
(TV)
Z1 Max
(CTV)
GG
±.25
(TV)
GG1
±.25
(CTV)
LL +.15
–.00
(TV)
LL1
±.13
(CTV)
9 A 20.83 19.63 11.91 13.06 17.15 16.13 M12X1-6g 3.89 5.03 20.62 17.75 22.99 23.06
11 B 20.83 19.63 11.91 13.06 20.32 19.43 M15X1-6g 3.89 5.03 22.99 22.22 22.99 23.06
13 C 20.83 19.63 11.91 13.06 23.50 22.47 M18X1-6g 3.89 5.03 27.76 25.57 22.99 23.06
15 D 20.83 19.63 11.91 13.06 26.67 27.94 M22X1-6g 3.89 5.03 30.96 28.95 22.99 23.06
17 E 20.83 19.63 11.91 13.06 31.45 30.40 M25X1-6g 3.89 5.03 34.93 31.21 22.99 23.06
19 F 20.83 19.63 11.91 13.06 33.02 32.00 M28X1-6g 3.89 5.03 37.31 35.05 22.99 23.06
21 G 20.07 18.82 12.70 13.84 36.20 35.18 M31X1-6g 4.65 5.79 41.28 37.92 22.99 22.96
23 H 20.07 18.82 12.70 13.84 39.37 38.35 M34X1-6g 4.65 5.79 44.45 41.30 22.99 22.96
25 J 20.07 18.82 12.70 13.84 42.55 41.53 M37X1-6g 4.65 5.79 47.63 45.13 22.99 22.96
ALUMINUM
TVS01RF
TV01RW
TV01DT
TV01DZ
TV01RGF
TV01RGW
TVS01RB
PART NUMBER BUILDER Page 44-46
ONLINE CONFIGURATOR www.amphenol-aerospace.com
COMPOSITE
CTVS01RF
CTV01RW
CTV01RGF
CTV01RGW
STAINLESS STEEL
TVS01RK
TVS01RKN
TVS01RS
TVS01RL
Commercial
51
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
III
SJT
I
II
Access
Aquacon
Series III
A
C
H
S
2 PLACES
PANEL THICKNESS
.062 MIN .125 MAX
1.57 MIN 3.18 MAX
BLUE BAND
††
.378 MAX
9.60 MAX
1.280 MAX
32.51 MAX
K REF
SHELL SIZES 9/11 –
.871 22.12
SHELL SIZES 13/25 –
.878 22.30
.091 MAX
2.31 MAX
B THREAD
V THREAD
D
RED
BAND
–A–
.794 MAX
20.17 MAX
.940 MAX
23.88 MAX
VIEW D
FOR SIZE 8 TWINAX ONLY,
RELATIVE TO
VIEW D
FOR SIZE 8 COAXIAL ONLY,
RELATIVE TO
–A–
–A–
Red band indicates fully mated
†† Blue band indicates rear release contact retention system
H .059 dia min.
1.5 dia min., 3 lockwire holes Formed lockwire hole design (6 holes) is optional
Millimeters
All dimensions for reference only NOTE: Deep reach receptacles are available for panel thicknesses up to .750 max.
PANEL HOLE
DIMENSIONS
JAM NUT
D-HOLE
MOUNTING
D
1
D
2
Inches
Jam Nut Receptacle
Military (D38999/24), Commercial (TV07, TVS07, CTV07, CTVP07)
Shell
Size
MS
Shell
Size
Code
B Thread
Class 2A
0.1P-0.3L-TS
(Plated) C Max.
D1
+.010
–.000
D2
+.000
–.010
H Hex
+.017
–.016
S
±.010
9 A .6250 1.199 .693 .657 .875 1.062
11 B .7500 1.386 .825 .770 1.000 1.250
13 C .8750 1.511 1.010 .955 1.188 1.375
15 D 1.0000 1.636 1.135 1.085 1.312 1.500
17 E 1.1875 1.761 1.260 1.210 1.438 1.625
19 F 1.2500 1.949 1.385 1.335 1.562 1.812
21 G 1.3750 2.073 1.510 1.460 1.688 1.938
23 H 1.5000 2.199 1.635 1.585 1.812 2.062
25 J 1.6250 2.323 1.760 1.710 2.000 2.188
Shell
Size
MS
Shell
Size
Code C Max.
D1
+.25
–.00
D2
+.00
–.25
H Hex
+.43
–.41
S
±.25
V Thread
Metric
9 A 30.45 17.60 16.70 22.23 26.97 M12X1-6g
11 B 35.20 20.96 19.59 25.40 31.75 M15X1-6g
13 C 38.38 25.65 24.26 30.18 34.93 M18X1-6g
15 D 41.55 28.83 27.56 33.32 38.10 M22X1-6g
17 E 44.73 32.01 30.73 36.53 41.28 M25X1-6g
19 F 49.50 35.18 33.91 39.67 46.02 M28X1-6g
21 G 52.65 38.35 37.08 42.80 49.23 M31X1-6g
23 H 55.85 41.53 40.26 46.02 52.37 M34X1-6g
25 J 59.00 44.70 43.43 50.80 55.58 M37X1-6g
ALUMINUM
TVS07RF
TV07RW
TV07DT
TV07DZ
TV07RGF
TV07RGW
TVS07RB
PART NUMBER BUILDER Page 42-46
ONLINE CONFIGURATOR www.amphenol-aerospace.com
COMPOSITE
CTVPS07RF
CTV07RW
CTV07RGF
CTV07RGW
STAINLESS STEEL
TVS07RK
TVS07RKN
TVS07RS
TVS07RL
MILITARY
D38999/24
Commercial
52 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
III
SJT
38999
I
II
Access
Aquacon
Series III
A
1.255 MAX
31.34 MAX
1.220 MAX
31.00 MAX B THREAD
D
V THREAD
.359 MAX
9.12 MAX
.359 MAX
9.12 MAX
.591 +.003
–.000
15.01 +.08
–.00
BLUE BAND
1.234 MAX
31.34 MAX
Q
1.656 MAX
42.06 MAX
1.797 MAX
45.64 MAX
VIEW D
FOR SIZE 8 TWINAX ONLY,
RELATIVE TO
VIEW D
FOR SIZE 8 COAXIAL ONLY,
RELATIVE TO
–A–
–A–
–A–
V THREAD
.591 +.003
–.000
15.01 +.08
–.00
–A–
Q
B THREAD
D
BLUE BAND
† Blue band indicates rear release contact retention system
All dimensions for reference only.
Inches Millimeters
COMPOSITE
Straight Plug
Military (D38999/26), Commercial (TV06, TVS06, CTV06, CTVS06)
Shell
Size
MS Shell Size
Code
B Thread
0.1P-0.3L-TS-2B
(Plated) Q Dia. Max.
9 A .6250 .858
11 B .7500 .984
13 C .8750 1.157
15 D 1.0000 1.280
17 E 1.1875 1.406
19 F 1.2500 1.516
21 G 1.3750 1.642
23 H 1.5000 1.768
25 J 1.6250 1.890
Shell
Size
MS Shell Size
Code Q Max. V Thread Metric
9 A 21.8 M12X1-6g
11 B 25.0 M15X1-6g
13 C 29.4 M18X1-6g
15 D 32.5 M22X1-6g
17 E 35.7 M25X1-6g
19 F 38.5 M28X1-6g
21 G 41.7 M31X1-6g
23 H 44.9 M34X1-6g
25 J 48.0 M37X1-6g
METAL
ALUMINUM
TVS06RF
TV06RW
TV06DT
TV06DZ
TV06RGF
TV06RGW
TVS06RB
PART NUMBER BUILDER Page 42-46
ONLINE CONFIGURATOR www.amphenol-aerospace.com
COMPOSITE
CTVS06RF
CTV06RW
CTV06RGF
CTV06RGW
STAINLESS STEEL
TVS06RK
TVS06RKN
TVS06RS
TVS06RL
MILITARY
D38999/26
Commercial
53
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
III
SJT
I
II
Access
Aquacon
Series III
A
BLUE
BAND
G
.190 +.010
–.000
4.82 +.26
–.00
B
THREAD
Q
.591 +.003
–.000
15.01+.08
–.00
3.59 MAX
9.12 MAX
GG
M
.005
M
.13
.138-32UNC-2B
HELICAL COIL
–A–
R
R
1.656 MAX
42.06 MAX
1.797 MAX
45.64 MAX
VIEW D
FOR SIZE 8 TWINAX ONLY,
RELATIVE TO
VIEW D
FOR SIZE 8 COAXIAL ONLY,
RELATIVE TO
–A–
–A–
D
† Blue band indicates rear release contact retention system
Designates true position dimensioning
Millimeters
All dimensions for reference only
** Partially tooled. Consult Amphenol Aerospace for availability
Inches
Shell Size
MS Shell
Size
Coded
B Thread
0.1P-0.3L-TS-2A
(Plated) G ±.060 Q Dia. Max
RGG Dia
±.005
9** A .6250 1.106 .859 1.038 1.838
11 B .7500 1.106 .969 1.115 1.948
13** C .8750 1.106 1.141 1.240 2.124
15 D 1.0000 1.106 1.266 1.327 2.248
17 E 1.1875 1.106 1.391 1.417 2.375
19 F 1.2500 1.356 1.500 1.557 2.495
21 G 1.3750 1.356 1.625 1.624 2.568
23 H 1.5000 1.356 1.750 1.713 2.723
25 J 1.6250 1.356 1.875 1.801 2.848
Shell Size
MS Shell
Size
Coded G ±.1.52 Q Dia. Max
R
GG Dia ±.13
9** A 28.09 21.82 26.37 46.69
11 B 28.09 24.62 28.32 49.48
13** C 28.09 28.98 31.50 53.95
15 D 28.09 32.16 33.71 57.10
17 E 28.09 35.33 35.99 60.33
19 F 34.44 38.10 39.55 63.37
21 G 34.44 41.28 41.25 65.23
23 H 34.44 44.45 43.51 69.16
25 J 34.44 47.63 45.75 72.34
Flange Mounting Plug
Commercial (TV09, TVS09, CTV09, CTVPS09)
ALUMINUM
TVS09RF
TV09RW
TV09DT
TV09DZ
TV09RGF
TV09RGW
TVS09RB
PART NUMBER BUILDER Page 44-46
ONLINE CONFIGURATOR www.amphenol-aerospace.com
COMPOSITE
CTVPS09RF
CTV09RW
CTV09RGF
CTV09RGW
STAINLESS STEEL
TVS09RK
TVS09RKN
TVS09RS
TVS09RL
Commercial
54 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
III
SJT
I
II
Access
Aquacon
Dualok
A
1.336 MAX
1.656 MAX
1.797 MAX
VIEW D
FOR SIZE 8 TWINAX ONLY,
RELATIVE TO
VIEW D
FOR SIZE 8 COAXIAL ONLY,
RELATIVE TO
–A–
–A–
ØE MAX
V THREAD
.359 MAX
.591 +.003
–.000
–A–
BLUE BAND
D
B THREAD
High Vibration Dualok Connector 38999 Series III Type
Commercial Plug (TV56, TVS56, CTV56, CTVS56)
ALUMINUM
TVS56RF
TV56RW
TV56DT
TV56DZ
TV56RGF
TV56RGW
TVS56RB
COMPOSITE
CTVS56RF
CTV56RW
CTV56RGF
CTV56RGW
STAINLESS STEEL
TVS56RK
TVS56RKN
TVS56RS
TVS56RL
PART NUMBER BUILDER Page 44-46
ONLINE CONFIGURATOR www.amphenol-aerospace.com
Commercial
Shell Size B Thread 0.1-0.3L-TS-2B (Plated) E
Dia.
Max.
Q
Dia. Max. Metric
V Thread
Metric.
9 .6250 .953 24.2 M12X1-6g
11 .7500 1.053 26.7 M15X1-6g
13 .8750 1.252 31.8 M18X1-6g
15 1.0000 1.365 34.6 M22X1-6g
19 1.2500 1.605 40.7 M28X1-6g
21 1.3750 1.735 44.0 M31X1-6g
25 1.6250 1.975 50.1 M37X1-6g
55
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
III
SJT
I
II
Access
Aquacon
Series III
A
Designed for high vibration and harsh environments such as aircraft gas turbine engines, the CLUTCH-LOK is also an ideal choice
for demanding applications such as aircraft, space and military ground vehicles. The unique clutch design of the Amphenol
CLUTCH-LOK means that you don’t have to compromise the need for quick, smooth mating of plugs and receptacles in order to get
increased uncoupling torque.
The CLUTCH-LOK has proven to not only remain mated and pass all the Series III specication requirements, it also has proven to
actually tighten itself under vibration. This is a powerful advantage over the traditionally high vibration application connectors. The
CLUTCH-LOK is also a tremendous advantage in inaccessible, hard to reach areas where mating torque is difcult to apply and
complete coupling is not veriable by inspection.
CLUTCH-LOK FEATURES AND BENEFITS:
High degree of differential torque
Innite free coupling and positive metal-to-metal bottoming with each mating
No settling back to the next ratchet tooth
Available with stainless steel shells and Class K rewall inserts
All the advantages of MIL-DTL-38999 Series III including EMI/RFI shielding, electrolytic erosion resistance
and contact protection with recessed pins
Enhanced connector performance at affordable prices
Completely intermateable with all existing MIL-DTL-38999 Series III connectors
Fully QPL’d
All dimensions for reference only.
Inches Millimeters
1.234 MAX
31.34 MAX
1.220 MAX
31.00 MAX B THREAD
D
V THREAD
.359 MAX
9.12 MAX .591 +.003
–.000
15.01 +.08
–.00
BLUE BAND
Q
1.656 MAX
42.06 MAX
VIEW D
FOR SIZE 8 COAXIAL ONLY,
RELATIVE TO –A–
–A– † Blue band indicates rear release contact retention system
Clutch-LokTM Plug
Commercial (26)
Shell Size
MS Shell
Size Code
B Thread
0.1P-0.3L-TS-2B
(Plated)
Q Dia.
Max.
9 A .6250 .858
11 B .7500 .984
13 C .8750 1.157
15 D 1.0000 1.280
17 E 1.1875 1.406
19 F 1.2500 1.516
21 G 1.3750 1.642
23 H 1.5000 1.768
25 J 1.6250 1.890
Shell Size
MS Shell
Size Code Q Max. V Thread Metric
9 A 21.8 M12X1-6g
11 B 25.0 M15X1-6g
13 C 29.4 M18X1-6g
15 D 32.5 M22X1-6g
17 E 35.7 M25X1-6g
19 F 38.5 M28X1-6g
21 G 41.7 M31X1-6g
23 H 44.9 M34X1-6g
25 J 48.0 M37X1-6g
PART NUMBER BUILDER Page 44-46
ONLINE CONFIGURATOR www.amphenol-aerospace.com
STAINLESS STEEL
MTV26RK
56 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
III
SJT
38999
I
II
Access
Aquacon
Series III
A
Shell
Size
B Thread
Class 2A
(Plated)
0.1P-0.3L-TS
L
Max.
(TV)
L1
Max.
(CTV)
M
+.000
–.005
(TV)
M1
+.000
–.005
(CTV) R1 R2
S
Max.
T
+.008
–.006
V
Thread
Metric
AA
Max.
Panel
Thickness
LL
+.006
–.000
(TV)
LL1
±.005
(CTV)
TT
+.008
–.006
9 .6250 .469 .514 .820 .773 .719 .594 .948 .128 M12X1-6g .234 .905 .908 .216
11 .7500 .469 .514 .820 .773 .812 .719 1.043 .128 M15X1-6g .234 .905 .908 .194
13 .8750 .469 .514 .820 .773 .906 .812 1.137 .128 M18X1-6g .234 .905 .908 .194
15 1.0000 .469 .514 .820 .773 .969 .906 1.232 .128 M22X1-6g .234 .905 .908 .173
17 1.1875 .469 .514 .820 .773 1.062 .969 1.323 .128 M25X1-6g .234 .905 .908 .194
19 1.2500 .469 .514 .820 .773 1.156 1.062 1.449 .128 M28X1-6g .234 .905 .908 .194
21 1.3750 .500 .545 .790 .741 1.250 1.156 1.575 .128 M31X1-6g .204 .905 .904 .194
23 1.5000 .500 .545 .790 .741 1.375 1.250 1.701 .154 M34X1-6g .204 .905 .904 .242
25 1.6250 .500 .545 .790 .741 1.500 1.375 1.823 .154 M37X1-6g .204 .905 .904 .242
PCB Wall Mounting Receptacle (Back Panel Mounting)
Commercial (TVP00 & TVPS00)
All dimensions for reference only.
Most common options are shown; other options are available.
Designates true position dimensioning
R1
R2
S
2 PLACES
2 PLACES
2 PLACES
4 PLACES
4 PLACES
.005 M
V THREAD
B
THREAD
PCB T
AIL STICKOUT SEE STEP 7
HOW TO ORDER
AA
.062
.001 DIA.
FOR SIZE 16 CONTACTS
.019
RED
BAND
BLUE
BAND
1.240 MAX.
TT
T
.001 DIA.
FOR SIZE 20 & 22D CONT
ACTS
LL
LL
1
M
M1L
L1
Red band indicates fully mated
†† Blue band indicates rear release contact retention system
PART NUMBER BUILDER Page 44-46
ONLINE CONFIGURATOR www.amphenol-aerospace.com
ALUMINUM
TVPS00RF
TVP00RW
TVP00DT
TVP00DZ
TVPS00RB
STAINLESS STEEL
TVPS00RK
TVPS00RKN
TVPS00RS
TVPS00RL
Commercial
57
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
III
SJT
I
II
Access
Aquacon
Series III
A
Shell
Size
B Thread
Class 2A
(Plated)
0.1P-0.3L-TS
L
Max.
(TV)
L1
Max.
(CTV)
M
+.000
–.005
(TV)
M1
+.000
–.005
(CTV)
R S
Max.
T
Thread
V
Thread
Metric
AA
Max.
Panel
Thickness
LL
+.006
–.000
(TV)
LL1
±.005
(CTV)
9 .6250 .469 .514 .820 .773 .719 1.094 .112-40UNC-3B M12X1-6g .234 .905 .908
11 .7500 .469 .514 .820 .773 .812 1.187 .112-40UNC-3B M15X1-6g .234 .905 .908
13 .8750 .469 .514 .820 .773 .906 1.281 .112-40UNC-3B M18X1-6g .234 .905 .908
15 1.0000 .469 .514 .820 .773 .969 1.344 .112-40UNC-3B M22X1-6g .234 .905 .908
17 1.1875 .469 .514 .820 .773 1.062 1.437 .112-40UNC-3B M25X1-6g .234 .905 .908
19 1.2500 .469 .514 .820 .773 1.156 1.531 .112-40UNC-3B M28X1-6g .234 .905 .908
21 1.3750 .500 .545 .790 .741 1.250 1.625 .112-40UNC-3B M31X1-6g .204 .905 .904
23 1.5000 .500 .545 .790 .741 1.375 1.750 .138-32UNC-3B M34X1-6g .204 .905 .904
25 1.6250 .500 .545 .790 .741 1.500 1.875 .138-32UNC-3B M37X1-6g .204 .905 .904
PCB Wall Mounting Receptacle
(Back Panel Mounting) (With Clinch Nuts)
Commercial (TVP10 & TVPS10)
Designates true position dimensioning
Red band indicates fully mated
†† Blue band indicates rear release contact retention system
All dimensions for reference only.
Consult Amphenol for more information on ordering connectors with clinch nuts.
Most common options are shown; other options are available.
R
S
2 PLACES
2 PLACES
V THREAD
B
THREAD
PCB TAIL STICKOUT SEE STEP 7
HOW TO ORDER
AA
.062
.001 DIA.
FOR SIZE 16 CONTACTS
.019
RED
BAND
BLUE
BAND
1.240 MAX.
.001 DIA.
FOR SIZE 20 & 22D CONTA
CTS
CONNECTOR WITH CLINCH NUTS
(4 PLACES)
T
THREAD
CLINCH NUT
.005 M
LL
LL1
M
M1L
L1
ALUMINUM
TVPS10RF
TVP10RW
TVP10DT
TVP10DZ
TVPS10RB
PART NUMBER BUILDER Page 44-46
ONLINE CONFIGURATOR www.amphenol-aerospace.com
STAINLESS STEEL
TVPS10RK
TVPS10RKN
TVPS10RS
TVPS10RL
Commercial
58 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
III
SJT
38999
I
II
Access
Aquacon
Series III
A
PCB Wall Mounting Double Flange Receptacle
Commercial (TVP40 & TVPS40)
Shell
Size
MS Shell
Size Code
(For Ref.)
A Dia.
±.005
(TV)
A Dia.
±.005
(CTV)
B Thread
Class 2A
(Plated)
0.1P-0.3L-TS
M
+.000
–.005
M1
±.003
(CTV)
R
(Panel
Mount)
(CTV)
R
(Panel
Mount
(TV)
S
Max.
(TV)
S
Max.
(CTV)
AA Max.
Panel
Thickness
PCB Mounting
Dimensions
T Dia. (TV)
TP
W (CTV)
TP
9 A NA 1.016 .6250 .820 .770 .719 N/A NA .949 .234 NA .532
11 B 1.062 1.148 .7500 .820 .770 .812 .766 1.187 1.042 .234 . .850 .601
13 C 1.250 1.250 .8750 .820 .770 .906 .859 1.281 1.136 .234 .994 .703
15 D 1.375 1.375 1.0000 .820 .770 .969 .938 1.344 1.230 .234 1.119 .791
17 E 1.500 1.500 1.1875 .820 .770 1.062 1.016 1.437 1.323 .234 1.237 .875
19 F 1.625 1.625 1.2500 .820 .770 1.156 1.110 1.531 1.449 .234 1.379 .975
21 G 1.750 1.750 1.3750 .820 .738 1.250 1.206 1.625 1.573 .204 1.489 1.053
23 H 1.875 1.875 1.5000 .820 .738 1.375 1.312 1.750 1.699 .204 1.619 1.195
25 J 2.000 2.000 1.6250 .820 .738 1.500 1.438 1.875 1.823 .204 1.744 1.233
Red band indicates fully mated
†† Blue band indicates rear release contact retention system
All dimensions for reference only.
.005 M
(4) CORROSION RESISTANT STEEL
.112-40 UNC-3B HELICAL INSERTS
A
T
W
2 PLA
CES
B THREAD
M (TV)
M (CTV) .673 ±.002
CONTACT STICKOUT SEE STEP 7
HOW TO ORDER
.019 ±.001 DIA
FOR SIZE 20 & 22D
CONTACTS
.062 ±.001 DIA
SIZE 16
CONTACTS
AA
RED
BAND
BLUE
BAND ††
1
S
2 PLACES
R
.005 M
(4) CORR
OSION RESISTANT STEEL
SELF-LOCKING CLINCH NUTS
.112-40 UNC-3B PER MIL-N-45938/6-4C
EXCEPT FOR
TV40 SHELL SIZES 23 & 25:
.138-32 UNC-3B PER MIL-N-45938/6-6C
2 PLA
CES
45°
ALUMINUM
TVPS40RF
TVP40RW
TVP40DT
TVP40DZ
TVPS40RB
PART NUMBER BUILDER Page 44-46
ONLINE CONFIGURATOR www.amphenol-aerospace.com
STAINLESS STEEL
TVPS40RK
TVPS40RKN
TVPS40RS
TVPS40RL
Commercial
59
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
III
SJT
I
II
Access
Aquacon
Series III
A
Shell
Size
B Thread
Class 2A
(Plated)
0.1P-0.3L-TS
L
Max.
(TV)
L1
Max.
(CTV)
M
+.000
–.005
(TV)
M1
+.000
–.005
(CTV) R1 R2
S
Max.
T
+.008
–.006
AA
Max.
Panel
Thickness
LL
+.006
–.000
(TV)
LL1
±.005
(CTV)
TT
±.008
9 .6250 .205 .250 .820 .773 .719 .594 .948 .128 .234 .905 .908 .216
11 .7500 .205 .250 .820 .773 .812 .719 1.043 .128 .234 .905 .908 .194
13 .8750 .205 .250 .820 .773 .906 .812 1.137 .128 .234 .905 .908 .194
15 1.0000 .205 .250 .820 .773 .969 .906 1.232 .128 .234 .905 .908 .173
17 1.1875 .205 .250 .820 .773 1.062 .969 1.323 .128 .234 .905 .908 .194
19 1.2500 .205 .250 .820 .773 1.156 1.062 1.449 .128 .234 .905 .908 .194
21 1.3750 .235 .280 .790 .741 1.250 1.156 1.575 .128 .204 .905 .904 .194
23 1.5000 .235 .280 .790 .741 1.375 1.250 1.701 .154 .204 .905 .904 .242
25 1.6250 .235 .280 .790 .741 1.500 1.375 1.823 .154 .204 .905 .904 .242
PCB Box Mounting Receptacle
Commercial (TVP02 & TVPS02)
Designates true position dimensioning
Red band indicates fully mated
†† Blue band indicates rear release contact retention system
All dimensions for reference only.
Most common options are shown; other options are available.
B
THREAD
PCB TAIL STICKOUT SEE STEP 7
HOW TO ORDER
AA
RED
BAND
BLUE
BAND
LL
LL1
L
L1
M
M1
R1
R2
S
2 PLACES
2 PLACES
2 PLACES
4 PLACES
4 PLA
CES
.005 M
T
TT
.019 ± .001 DIA.
FOR SIZES 20 & 22D
.062 ± .001 DIA.
FOR SIZE 16 CONTACTS
ALUMINUM
TVPS02RF
TVP02RW
TVP02DT
TVP02DZ
TVPS02RB
PART NUMBER BUILDER Page 44-46
ONLINE CONFIGURATOR www.amphenol-aerospace.com
STAINLESS STEEL
TVPS02RK
TVPS02RKN
TVPS02RS
TVPS02RL
Commercial
60 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
III
SJT
38999
I
II
Access
Aquacon
Series III
A
Shell
Size
B Thread
Class 2A
(Plated)
0.1P-0.3L-TS
L
Max.
(TV)
L1
Max.
(CTV)
M
+.000
–.005
(TV)
M1
+.000
–.005
(CTV) R
S
Max.
T
Thread
AA
Max.
Panel
Thickness
LL
+.006
–.000
(TV)
LL1
+.006
–.000
(CTV)
9 .6250 .205 .250 .820 .773 .719 1.031 .112-40UNC-3B .234 .905 .908
11 .7500 .205 .250 .820 .773 .812 1.125 .112-40UNC-3B .234 .905 .908
13 .8750 .205 .250 .820 .773 .906 1.172 .112-40UNC-3B .234 .905 .908
15 1.0000 .205 .250 .820 .773 .969 1.281 .112-40UNC-3B .234 .905 .908
17 1.1875 .205 .250 .820 .773 1.062 1.375 .112-40UNC-3B .234 .905 .908
19 1.2500 .205 .250 .820 .773 1.156 1.469 .112-40UNC-3B .234 .905 .908
21 1.3750 .235 .280 .790 .741 1.250 1.562 .112-40UNC-3B .204 .905 .904
23 1.5000 .235 .280 .790 .741 1.375 1.750 .112-40UNC-3B .204 .905 .904
25 1.6250 .235 .280 .790 .741 1.500 1.875 .112-40UNC-3B .204 .905 .904
PCB Box Mounting Receptacle (With Clinch Nuts)
Commercial (TVP12 & TVPS12)
Designates true position dimensioning
† Red band indicates fully mated
†† Blue band indicates rear release
contact retention system
All dimensions for reference only.
Most common options are shown; other options are available.
B
THREAD
PCB TAIL STICK
OUT SEE STEP 7
HOW TO ORDER
AA
RED
BAND
BLUE
BAND
CONNECTOR WITH CLINCH NUTS
(4 PLACES)
T
THREAD
CLINCH NUT
L
L1
M
M1
LL
LL
1
R
S
2 PLA
CES
2 PLA
CES
.062 .001 DIA.
FOR SIZE 16 CONTACTS
.019 .001 DIA.
FOR SIZES 20 &
22D CONTA
CTS
.005 M
ALUMINUM
TVPS12RF
TVP12RW
TVP12DT
TVP12DZ
TVPS12RB
PART NUMBER BUILDER Page 44-46
ONLINE CONFIGURATOR www.amphenol-aerospace.com
STAINLESS STEEL
TVPS12RK
TVPS12RKN
TVPS12RS
TVPS12RL
Commercial
61
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
III
SJT
I
II
Access
Aquacon
Series III
A
PCB Jam Nut Receptacle
Commercial (TV07 & TVS07)
Shell
Size
A*
+.000
–.010
B Thread
Class 2A
(Plated)
0.1P-0.3L-TS
C
Max.
D1
+.010
–.000
D2
+.010
–.000
H Hex
+.017
–.016
S
±.010
T
+.010
–.000
V Thread
Metric
9 .669 .6250 1.199 .700 .670 .875 1.062 .697 M12X1-6g
11 .769 .7500 1.386 .825 .770 1.000 1.250 .822 M15X1-6g
13 .955 .8750 1.511 1.010 .955 1.188 1.375 1.007 M18X1-6g
15 1.084 1.0000 1.636 1.135 1.085 1.312 1.500 1.134 M22X1-6g
17 1.208 1.1875 1.761 1.260 1.210 1.438 1.625 1.259 M25X1-6g
19 1.333 1.2500 1.949 1.385 1.335 1.562 1.812 1.384 M28X1-6g
21 1.459 1.3750 2.073 1.510 1.460 1.688 1.938 1.507 M31X1-6g
23 1.575 1.5000 2.199 1.635 1.585 1.812 2.062 1.634 M34X1-6g
25 1.709 1.6250 2.323 1.760 1.710 2.000 2.188 1.759 M37X1-6g
Red band indicates fully mated
†† Blue band indicates rear release contact retention system
H .059 dia. min. 3 lockwire holes. Formed lockwire hole design (6 holes) is
optional.*“D” shaped mounting hole dimensions
All dimensions for reference only.
Most common options are shown;
other options are available.
PANEL HOLE
DIMENSIONS
JAM NUT
D-HOLE
MOUNTING
D1
D2
C
S
2 PLACES
H
PANEL THICKNESS
.062 MIN.
.125 MAX.
B
THREAD
1.280 MAX.
V THREAD
.062 .001 DIA.
FOR SIZE 16 CONTACTS
.019 .001 DIA.
FOR SIZES 20 & 22D
CONTACTS
BLUE
BAND
.378 MAX.
RED
BAND
PCB TAIL STICK
OUT SEE STEP 7
HOW TO ORDER
ALUMINUM
TVS07RF
TV07RW
TV07DT
TV07DZ
TVS07RB
PART NUMBER BUILDER Page 44-46
ONLINE CONFIGURATOR www.amphenol-aerospace.com
STAINLESS STEEL
TVS07RK
TVS07RKN
TVS07RS
TVS07RL
Commercial
62 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
III
SJT
38999
I
II
Access
Aquacon
Series III
A
PCB Jam Nut, Double Flange Receptacles
Commercial (TVP47 & TVPS47)
Shell
Size
MS Shell
Size Code
(For Ref.)
B Thread
Class 2A
0.1P-0.3L-TS
(Plated)
C
±.005
(Jam Nut
Flange Dia.
D1
+.010
–.000
D2
+.000
–.010
H
Hex
+.017
–.016
M
Dia.
±.005
(TV )
M
Dia.
±.005
(CTV)
R Thread
Metric
(Plated)
S
+.011
–.010
PCB Mounting
Dimensions
V Dia. (TV)
TP
W (CTV)
TP
9 A .6250 1.188 .700 .670 .875 1.062 1.016 M17X1-6g0.100R 1.062 .753 .532
11 B .7500 1.375 .825 .770 1.000 1.062 1.148 M20X1-6g0.100R 1.250 .850 .601
13 C .8750 1.500 1.010 .955 1.188 1.250 1.250 M25X1-6g0.100R 1.375 .994 .703
15 D 1.0000 1.625 1.135 1.085 1.312 1.375 1.375 M28X1-6g0.100R 1.500 1.119 .791
17 E 1.1875 1.750 1.260 1.210 1.438 1.500 1.500 M32X1-6g0.100R 1.625 1.237 .875
19 F 1.2500 1.937 1.385 1.335 1.562 1.625 1.625 M35X1-6g0.100R 1.812 1.379 .975
21 G 1.3750 2.062 1.510 1.460 1.688 1.750 1.750 M38X1-6g0.100R 1.937 1.489 1.053
23 H 1.5000 2.188 1.635 1.585 1.812 1.875 1.875 M41X1-6g0.100R 2.062 1.644 1.145
25 J 1.6250 2.312 1.760 1.710 2.000 2.000 2.000 M44X1-6g0.100R 2.188 1.744 1.233
All dimensions for reference only.
† Red band indicates fully mated
†† Blue band indicates rear release contact retention system.
H .059 dia. min. (1.5 dia. min.) 3 lockwire holes.
Formed lockwire hole design (6 holes) is optional.
S
C
H
HEX
.673 ±.002
CONTACT
STICKOUT SEE STEP 7
HOW TO ORDER
V
M
.889 MAX.
B THREAD
R THREAD .062-.125
PANEL THICKNESS
(4) CORROSION RESISTANT STEEL
.112-40 UNC-3B HELICAL INSERTS
45°
RED
BAND
BLUE
BAND
††
W
2 PLACES
.005 M
.019 ± .001 DIA.
FOR SIZES 20 & 22D
.062 ± .001 DIA.
FOR SIZE
16 CONTACTS
PANEL HOLE
DIMENSIONS
JAM NUT
D-HOLE
MOUNTING
D1
D2
ALUMINUM
TVPS47RF
TVP47RW
TVP47DT
TVP47DZ
PART NUMBER BUILDER Page 44-46
ONLINE CONFIGURATOR www.amphenol-aerospace.com
STAINLESS STEEL
TVPS47RK
TVPS47RKN
TVPS47RS
TVPS47RL
Commercial
63
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
III
SJT
I
II
Access
Aquacon
Series III
A
Red band indicates
fully mated
NOTE: Consult Amphenol
Aerospace for availability
of non-glass-sealed
versions with printed circuit
tail contacts.
All dimensions for reference.
S
2 PLACES
R
R2
1
2 PLACES
2 PLACES
TT
4 PLACES
.005
M
T
4 PLACES
B THREAD
RED
BAND
.913+.011
–.000
.093+.006
–.000
B .100±.03
D .200±.03
F .300±.03
Size 22 Ø.030±.0005
20 Ø.040±.001
16 Ø.0625±.001
PCB TAIL STICKOUT
PCB Hermetic Box Mounting Receptacle
Commercial
Shell
Size Part Number
B Thread
0.1P-0.3L-TS
(Plated)
R1 R2 S
±.010
T
±.008
TT
±.008
910-626501-XXX .6250 .719 .594 .938 .128 .216
11 502-XXX .7500 .812 .719 1.031 .128 .194
13 503-XXX .8750 .906 .812 1.125 .128 .194
15 504-XXX 1.0000 .969 .906 1.219 .128 .173
17 505-XXX 1.1875 1.062 .969 1.312 .128 .194
19 506-XXX 1.2500 1.156 1.062 1.438 .128 .194
21 507-XXX 1.3750 1.250 1.156 1.562 .128 .194
23 508-XXX 1.5000 1.375 1.250 1.688 .154 .242
25 509-XXX 1.6250 1.500 1.375 1.812 .154 .242
Designates true position dimensioning
-35 Designates Insert Arrangement Number
PDesignates Pin Contacts in Normal Position
SDesignates Socket Contacts in Normal Position
10-626 Base Number for MIL-DTL-38999 Series III
Hermetic with PCB Tail
B.100±.03
D.200±.03
F.300±.03
1Hermetic seal, passivated Stainless Steel, 200°C
2Hermetic seal, Stainless Steel w/Nickel Plate
3Carbon Steel w/reowed tin plate
HOW TO ORDER
1. BASE NUMBER:
2. SELECT A CODED SHELL SIZE:
4. CONTACT TYPE/ALTERNATE KEYING POSITIONS:
Refer to page 46 for alternate rotation letters to use.
See chart below 501-509, designates size 9-25 shell size.
Example: 501 = Size 9 Shell
3. SELECT AN INSERT ARRANGEMENT:
Refer to insert availability chart on page 2-5 and pin-out illustrations
on pages 14-28. Please enter the second number which represents
the Insert Arrangement number.
5. SELECT A SHELL FINISH:
6. SELECT A TAIL LENGTH:
1. 2. 3. 4. 5. 6.
PART #
See chart below
Base
Number
Coded
Shell
Size
Insert
Arrg.
Contact
Type/Alt.
Keying
Shell
Finish
Tail
Length
10-626 501-35 P 1 B
64 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
III
SJT
38999
I
II
Access
Aquacon
Series III
A
C
T
H
S
2 PLACES
K REF
KK
RED
BAND
B THREAD
A
L
PANEL THICKNESS
.062 MIN .125 MAX
SHELL SIZES 9/11 – .871
SHELL SIZES 13/25 – .878
B .100 ±.03
D .200 ±.03
F .300 ±.03
PCB TAIL
STICKOUT
Siz
e 22 Ø.030 ±.0005
20 Ø.040 ±.001
16 Ø.0625 ±.001
PANEL HOLE
DIMENSIONS
JAM NUT
D-HOLE
MOUNTING
D1
D2
Shell
Size Part Number
A+
+.000
–.010
B Thread
Class 2A
0.1P-0.3L-
TS (Plated)
C
Max
D1
+.010
–.000
D1
+.000
–.010
H Hex
+.017
–.016
L
Max
S
±.010
T+
+.010
–.000
KK +.011
–.000
9 10-626471-XXX .669 .6250 1.199 .700 .670 .875 .357 1.062 .697 .642
11 472-XXX .769 .7500 1.386 .825 .770 1.000 .357 1.250 .822 .766
13 473-XXX .955 .8750 1.511 1.010 .955 1.188 .357 1.375 1.007 .892
15 474-XXX 1.084 1.0000 1.636 1.135 1.085 1.312 .357 1.500 1.134 1.018
17 475-XXX 1.208 1.1875 1.761 1.260 1.210 1.438 .357 1.625 1.259 1.142
19 476-XXX 1.333 1.2500 1.949 1.385 1.335 1.562 .381 1.182 1.384 1.268
21 477-XXX 1.459 1.3750 2.073 1.510 1.460 1.688 .381 1.938 1.507 1.392
23 478-XXX 1.575 1.5000 2.199 1.635 1.585 1.812 .381 2.062 1.634 1.518
25 479-XXX 1.709 1.6250 2.323 1.760 1.710 2.000 .381 2.188 1.759 1.642
PCB Hermetic Jam Nut Receptacle
Commercial
All dimensions for reference only.
† Red band indicates fully mated
H .059 dia. min. (1.5 dia. min.) 3 lockwire holes. Formed
lockwire hole design (6 holes) is optional.
4. CONTACT TYPE/ALTERNATE KEYING POSITIONS:
Refer to page 46 for alternate rotation letters to use.
10-626 Base Number for MIL-DTL-38999 Series III
Hermetic with PCB Tail
-35 Designates Insert Arrangement Number
PDesignates Pin Contacts in Normal Position
SDesignates Socket Contacts in Normal Position
See chart below 471-479, designates size 9-25 shell size.
1. BASE NUMBER:
2. SELECT A CODED SHELL SIZE:
3. SELECT AN INSERT ARRANGEMENT:
Refer to insert availability chart on page 2-5 and pin-out
illustrations on pages 14-28. Please enter the second number which
represents the Insert Arrangement number.
5. SELECT A SHELL FINISH:
1Hermetic seal, passivated Stainless Steel, 200°C
2Hermetic seal, Stainless Steel w/Nickel Plate
3Carbon Steel w/reowed tin plate
6. SELECT A TAIL LENGTH:
B100 ±.03
D.200 ±.03
F.300 ±.03
1. 2. 3. 4. 5. 6.
PART #
See chart below
Base
Number
Coded
Shell
Size
Insert
Arrg.
Contact
Type/Alt.
Keying
Shell
Finish
Tail
Length
10-626 471-35 P 1 B
HOW TO ORDER
65
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
III
SJT
I
II
Access
Aquacon
Series III
A
Red band indicates fully mated
PCB Hermetic Solder Mounting Receptacle
Commercial
Shell
Size Part Number
B Thread Class
2A 0.1P-0.3L-
TS (Plated)
L
+.011
–.005
M
+.006
–.005
GG Dia.
+.011
–.010
KK Dia
+.011
–.005
9 10-626481-XXX .6250 .806 .125 .750 .672
11 482-XXX .7500 .806 .125 .844 .781
13 483-XXX .8750 .806 .125 .969 .906
15 484-XXX 1.0000 .806 .125 1.094 1.031
17 485-XXX 1.1875 .806 .125 1.218 1.156
19 486-XXX 1.2500 .806 .125 1.312 1.250
21 487-XXX 1.3750 .806 .125 1.438 1.375
23 488-XXX 1.5000 .838 .156 1.563 1.500
25 489-XXX 1.6250 .838 .156 1.688 1.625
GG
B THREAD
RED BAND
KK
M
L
.031
+.006
–.005
B .100 ±.03
D .200 ±.03
F .300 ±.03
PCB TAIL
STICKOUT
Siz
e 22 Ø.030 ±.0005
20 Ø.040 ±.001
16 Ø.0625 ±.001
-35 Designates Insert Arrangement Number
PDesignates Pin Contacts in Normal Position
SDesignates Socket Contacts in Normal Position
10-626 Base Number for MIL-DTL-38999 Series III
Hermetic with PCB Tail
1Hermetic seal, passivated Stainless Steel, 200°C
2*Hermetic seal, Stainless Steel w/Nickel Plate
3*Carbon Steel w/reowed tin plate
B.100±.03
D.200±.03
F.300±.03
1. BASE NUMBER:
See chart below 481-489, designates
size 9-25 shell size.
2. SELECT A CODED SHELL SIZE:
3. SELECT AN INSERT ARRANGEMENT:
Refer to insert availability chart on page 2-5 and pin-out
illustrations on pages 14-28. Please enter the second number
which represents the Insert Arrangement number.
4. CONTACT TYPE/ALTERNATE KEYING POSITIONS:
Refer to page 46 for alternate rotation letters to use.
5. SELECT A SHELL FINISH:
6. SELECT A TAIL LENGTH:
1. 2. 3. 4. 5. 6.
PART #
See chart below
Base
Number
Coded
Shell Size Insert Arrg.
Contact
Type/Alt.
Keying
Shell
Finish Tail Length
10-626 481-35 P 1 B
HOW TO ORDER
66 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
III
SJT
38999
I
II
Access
Aquacon
Series III
A
Red band indicates fully mated
Shell
Size Part Number
B Thread Class 2A
0.1P-0.3L-TS
(Plated)
L
+.011
–.000
M
+.006
–.005
GG Dia.
+.011
–.010
910-626491-XXX .6250 .806 .125 .973
11 492-XXX .7500 .806 .125 1.095
13 493-XXX .8750 .806 .125 1.221
15 494-XXX 1.0000 .806 .125 1.347
17 495-XXX 1.1875 .806 .125 1.434
19 496-XXX 1.2500 .806 .125 1.579
21 497-XXX 1.3750 .806 .125 1.721
23 498-XXX 1.5000 .838 .156 1.886
25 499-XXX 1.6250 .838 .156 1.973
-35 Designates Insert Arrangement Number
PDesignates Pin Contacts in Normal Position
SDesignates Socket Contacts in Normal Position
10-626 Base Number for MIL-DTL-38999 Series III
Hermetic with PCB Tail
1Hermetic seal, passivated Stainless Steel, 200°C
2*Hermetic seal, Stainless Steel w/Nickel Plate
3*Carbon Steel w/reowed tin plate
B.100±.03
D.200±.03
F.300±.03
* Not available for weld mount. All dimensions for reference only.
1. BASE NUMBER:
See chart below 491-499, designates size 9-25 shell size.
2. SELECT A CODED SHELL SIZE:
3. SELECT AN INSERT ARRANGEMENT:
Refer to insert availability chart on page 2-5 and pin-out
illustrations on pages 14-28. Please enter the second number
which represents the Insert Arrangement number.
4. CONTACT TYPE/ALTERNATE KEYING POSITIONS:
Refer to page 46 for alternate rotation letters to use.
5. SELECT A SHELL FINISH:
6. SELECT A TAIL LENGTH:
GG
B THREAD
RED BAND
L
M
B .100 ±.03
D .200 ±.03
F .300 ±.03
Siz
e 22 Ø.030 ±.0005
20 Ø.040 ±.001
16 Ø.0625 ±.001
PCB TAIL
STICKOUT
PCB Hermetic Weld Mounting Receptacle
Commercial
1. 2. 3. 4. 5. 6.
PART #
See chart below
Base
Number
Coded
Shell Size
Insert
Arrg.
Contact
Type/Alt.
Keying
Shell
Finish Tail Length
10-626 491 -35 P 1 B
HOW TO ORDER
67
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
III
SJT
I
II
Access
Aquacon
Series III
A
Red band indicates fully mated
NOTE: Consult Amphenol Aerospace for availability of non-glass-sealed versions
with printed circuit tail contacts.
Millimeters
All dimensions for reference only Designates true position dimensioning
Inches
S
2 PLACES
R
R
2
1
2 PLACES
2 PLACES
TT
4 PLACES .005
.13
M
M
T
4 PLACES
B THREAD
RED
BAND
.250 MAX
6.35 MAX
1
.913 +.011
–.000
23.19 +.28
–.00 .093 +.006
–.000
2.36 +.15
–.00
Hermetic Box Mounting Receptacle
Military (D38999/21), Commercial (TVPS02)
Shell Size
MS Shell
Size Coded
B Thread
0.1P-0.3L-TS
(Plated)
R1 R2 S
±.010
T
±.008
TT
±.008
9 A .6250 .719 .594 .938 .128 .216
11 B .7500 .812 .719 1.031 .128 .194
13 C .8750 .906 .812 1.125 .128 .194
15 D 1.0000 .969 .906 1.219 .128 .173
17 E 1.1875 1.062 .969 1.312 .128 .194
19 F 1.2500 1.156 1.062 1.438 .128 .194
21 G 1.3750 1.250 1.156 1.562 .128 .194
23 H 1.5000 1.375 1.250 1.688 .154 .242
25 J 1.6250 1.500 1.375 1.812 .154 .242
Shell Size
MS Shell
Size Coded
R1 R2 S
±.25
T
±.20
TT
±.20
9 A 18.26 15.09 23.83 3.25 5.49
11 B 20.62 18.26 26.19 3.25 4.93
13 C 23.01 20.62 28.58 3.25 4.93
15 D 24.61 23.01 30.96 3.25 4.39
17 E 26.97 24.61 33.32 3.25 4.93
19 F 29.36 26.97 36.53 3.25 4.93
21 G 31.75 29.36 39.67 3.25 4.93
23 H 34.93 31.75 42.88 3.91 6.15
25 J 38.10 34.93 46.02 3.91 6.15
PART NUMBER BUILDER Page 42-46
ONLINE CONFIGURATOR www.amphenol-aerospace.com
STAINLESS STEEL
TVPS02Y
TVPS02YN
MILITARY
D38999/21
Commercial
68 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
III
SJT
38999
I
II
Access
Aquacon
Series III
A
Red band indicates fully mated
H .059 dia min.
1.5 dia min. 3 lockwire holes Formed lockwire hole design (6 holes) is optional.
Millimeters
Inches
All dimensions for reference only
C
H
S
2 PLACES
K REF
.200 MAX
5.08 MAX
KK
RED
BAND
B THREAD
L
PANEL THICKNESS
.062 MIN .125 MAX
1.57 MIN 3.18 MAX
SHELL SIZES 9/11 – .871 22.12
SHELL SIZES 13/25 – .878 22.30
PANEL HOLE
DIMENSIONS
JAM NUT
D-HOLE
MOUNTING
D
1
D
2
Hermetic Jam Nut Receptacle
Military (D38999/23), Commercial (TVS07)
Shell
Size
MS Shell
Size code
B Thread
Class 2A
0.1P-0.3L-
TS (Plated) C Max
D1 +.010
–.000
D2 +.000
–.010
H Hex
+.017
–.016 L Max S ±.010
KK +.011
–.000
9 A .6250 1.199 .693 .657 .875 .357 1.062 .642
11 B .7500 1.386 .825 .770 1.000 .357 1.250 .766
13 C .8750 1.511 1.010 .955 1.188 .357 1.375 .892
15 D 1.0000 1.636 1.135 1.085 1.312 .357 1.500 1.018
17 E 1.1875 1.761 1.260 1.210 1.438 .357 1.625 1.142
19 F 1.2500 1.949 1.385 1.335 1.562 .381 1.812 1.268
21 G 1.3750 2.073 1.510 1.460 1.688 .381 1.938 1.392
23 H 1.5000 2.199 1.635 1.585 1.812 .381 2.062 1.518
25 J 1.6250 2.323 1.760 1.710 2.000 .381 2.188 1.642
Shell
Size
MS Shell
Size code C Max D1 +.25 –.00 D2 +.00 –.25
H Hex
+.43
–.41 L Max S ±.25
KK +.28
–.00
9 A 30.45 17.60 16.70 22.23 9.07 26.97 16.31
11 B 35.20 20.96 19.59 25.40 9.07 31.75 19.46
13 C 38.38 25.65 24.26 30.18 9.07 34.93 22.66
15 D 41.55 28.83 27.56 33.32 9.07 38.10 25.86
17 E 44.73 32.01 30.73 36.53 9.07 41.28 29.01
19 F 49.50 35.18 33.91 39.67 9.68 46.02 32.21
21 G 52.65 38.35 37.08 42.80 9.68 49.23 35.36
23 H 55.85 41.53 40.26 46.02 9.68 52.37 38.56
25 J 59.00 44.70 43.43 50.80 9.68 55.58 41.71
PART NUMBER BUILDER Page 42-46
ONLINE CONFIGURATOR www.amphenol-aerospace.com
STAINLESS STEEL
TVS07Y
TVS07YN
MILITARY
D38999/23
Commercial
69
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
III
SJT
I
II
Access
Aquacon
Series III
A
Millimeters
Inches
All dimensions for reference only
Red band indicates fully mated
GG
B THREAD
RED BAND
.375 MAX
9.53 MAX
KK
M
L
.031+.006
–.005
.79 +.15
–.13
GG
B THREAD
RED BAND
L
M
.375 MAX
9.53 MAX
Millimeters
Inches
Red band indicates fully mated
Hermetic Solder Mounting Receptacle
Military (D38999/25), Commercial (TVSI)
Hermetic Wall Mounting Receptacle
Military (D38999/27), Commercial (TVSHIY)
Shell
Size
MS
Shell
Size
Code
B Thread
Class 2A
0.1P-0.3L-TS
(Plated)
L
+.011
–.005
M
+.006
–.005
GG Dia.
+.011
–.010
KK Dia
+.011
–.005
9 A .6250 .806 .125 .750 .672
11 B .7500 .806 .125 .844 .781
13 C .8750 .806 .125 .969 .906
15 D 1.0000 .806 .125 1.094 1.031
17 E 1.1875 .806 .125 1.218 1.156
19 F 1.2500 .806 .125 1.312 1.250
21 G 1.3750 .806 .125 1.438 1.375
23 H 1.5000 .838 .156 1.563 1.500
25 J 1.6250 .838 .156 1.688 1.625
Shell
Size
MS
Shell
Size
Code
L
+.28
–.00
M
+.15
–.13
GG
Dia.
+.28
–.25
KK Dia
+.03
–.13
9 A 20.47 3.18 19.05 17.07
11 B 20.47 3.18 21.44 19.84
13 C 20.47 3.18 24.61 23.01
15 D 20.47 3.18 27.79 26.19
17 E 20.47 3.18 30.94 29.36
19 F 20.47 3.18 33.32 31.75
21 G 20.47 3.18 36.53 34.93
23 H 21.29 3.96 39.70 38.10
25 J 21.29 3.96 42.88 41.28
Shell
Size
MS
Shell
Size
Code
B Thread
Class 2A
0.1P-0.3L-TS
(Plated)
L
+.011
–.000
M
+.006
–.005
GG Dia.
+.011
–.010
9 A .6250 .806 .125 .973
11 B .7500 .806 .125 1.095
13 C .8750 .806 .125 1.221
15 D 1.0000 .806 .125 1.347
17 E 1.1875 .806 .125 1.434
19 F 1.2500 .806 .125 1.579
21 G 1.3750 .806 .125 1.721
23 H 1.5000 .838 .156 1.886
25 J 1.6250 .838 .156 1.973
Shell
Size
MS
Shell
Size
Code
L
+.28
–.00
M
+.15
–.13
GG Dia.
+.25
–.00
9 A 20.47 3.18 24.71
11 B 20.47 3.18 27.81
13 C 20.47 3.18 31.01
15 D 20.47 3.18 34.21
17 E 20.47 3.18 36.42
19 F 20.47 3.18 40.11
21 G 20.47 3.18 43.71
23 H 21.29 3.96 47.90
25 J 21.29 3.96 50.11
PART NUMBER BUILDER Page 42-46
ONLINE CONFIGURATOR www.amphenol-aerospace.com
STAINLESS STEEL
TVSIY
TVSIYN
MILITARY
D38999/25
PART NUMBER BUILDER Page 42-46
ONLINE CONFIGURATOR
www.amphenol-aerospace.com
STAINLESS STEEL
TVSHIY
TVSHIYN
MILITARY
D38999/27
Commercial
Commercial
70 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
III
SJT
38999
I
II
Access
Aquacon
Series III
A
Breakaway with Coax Contacts
Amphenol offers a variety of lanyard plug styles including MIL-STD-1760
types 1, 2 and 6 for Stores Management applications.
Series III, TV Breakaway Fail-Safe Connectors
Quick-Disconnect with an Axial Pull of Lanyard
Amphenol® Tri-Start Breakaway Fail-Safe
Connectors provide unequaled
performance in environments requiring
instant disengagement.
The “Breakaway” Fail-Safe connector family
offers a wide range of electrical and
mechanical features:
Instant decoupling and damage
free separation
Completely intermateable with standard
receptacles (D38999/20 and /24)
Inventory support commonality through
the use of standard insert arrangements
and contacts
Breakaway unmating is initiated by applying
a pull force to the lanyard which causes the
operating sleeve on the plug to move away
from the receptacle. Coupling segments
on the plug then move away from the mating
receptacle while expanding, thus releasing
the receptacle. After completion of the
unmating sequence, spring compression
returns the sleeve and segments to their
original positions. Unmating of the plug may also
be accomplished by normal rotation of the coupling
ring without affecting the breakaway capability.
The Tri-Start Breakaway Fail-Safe connector exceeds the MIL-Spec
Series III requirements for EMI/EMP shielding and features include:
Solid metal-to-metal coupling
EMI grounding ngers
Conductive nishes
Amphenol Breakaway Fail-Safe connectors are qualied to
MIL-DTL-38999/29, /30 and /31 (for MIL-STD-1760 Stores Management
applications). Amphenol also manufactures custom breakaway connectors
including those with:
Highly durable non-metallic operating sleeves in a variety of lengths
and diameters
Increased pull-force capability
Low-prole designs
Custom lanyard lengths and backshells
Low force separation capabilities
Low insertion/separation force contacts
Non-cadmium nishes
Contact your local Amphenol representative. Whether you need a standard
Breakaway, one of our custom Breakaways, or a unique Breakaway design.
Special conguration Fail-Safe used on
space telescope application. Lanyard is
replaced by a swivel ring for remote
disconnect and “wing arms” have been
added for manual actuation accessibility
by gloved astronauts.
TYPE 2 TYPE 6 TYPE 1
71
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
III
SJT
I
II
Access
Aquacon
Series III
A
TV Breakaway Fail-Safe Lanyard Release Plug
Military (D38999/29 & D38999/30)
Shell Size-
Insert
Arrangement
Military Shell
Size- Insert
Arrangement
Commercial
Basic Part# Shell
& Insert Arrg.
Code
Service
Rating
Total
Contacts
Contact Size
22D 20 16 12 12
Coax
8
Coax
8
Twinax
11-2 N/A 88/91-556508 I 2 2
11-35 N/A 06 M 13 13
11-98 N/A 07 I 6 6
13-4 N/A 10 I 4 4
13-8 N/A 11 I 8 8
13-35 N/A 14 M 22 22
13-98 N/A 13 I 10 10
15-5 N/A 18 II 5 5
15-15 N/A 23 I 15 14 1
15-18 N/A 22 I 18 18
15-19 N/A 19 I 19 19
15-35 N/A 20 M 37 37
15-97 N/A 21 I 12 8 4
17-6 E-6 27 I 6 6
17-8 E-8 28 II 8 8
17-26 E-26 29 I 26 26
17-35 E-35 30 M 55 55
17-99 E-99 31 I 23 21 2
19-11 F-11 37 II 11 11
19-32 F-32 39 I 32 32
19-35 F-35 40 M 66 66
21-11 G-11 47 I 11 11
21-16 G-16 48 II 16 16
21-35 G-35 49 M 79 79
21-39 G-39 51 I 39 37 2
21-41 G-41 50 I 41 41
23-21 H-21 57 II 21 21
23-35 H-35 58 M 100 100
23-53 H-53 59 I 53 53
23-54 H-54 61 M 53 40 9 4
23-55 H-55 60 I 55 55
25-4 J-4 71 I 56 48 8
25-19 J-19 66 I 19 19
25-20 J-20 74 N 30 10 13 4 3
25-24 J-24 72 I 24 12 12
25-29 J-29 67 I 29 29
25-35 J-35 68 M 128 128
25-43 J-43 69 I 43 23 20
25-46 J-46 73 I 46 40 4 2*
25-61 J-61 70 I 61 61
1. 2. 3. 4. 5. 6. 7.
DOD Number
Prefix
Spec Sheet
Number Service Class Shell Size
Insert
Arrangement
Lanyard Length
Code
Alternate Keying
Position
D38999/ 29 F E 35 P N
HOW TO ORDER - MILITARY
4. & 5. INSERT AVAILABILITY
2. SPECIFICATION SHEET NUMBER
29 Lanyard Release Plug with pin contacts
30 Lanyard Release Plug with socket contacts
3. SERVICE CLASS
F
Designates electroless nickel plated aluminum,
optimum EMI shielding effectiveness –65dB@10 GHz
specication min., 48 hour salt spray, 200°C
W
Designates corrosion resistant olive drab cadmium
plate aluminum, 500 hour extended salt spray,
EMI –50dB@10 GHz specication min., 175°C
1. DOD NUMBER PREFIX
D38999/ Designates MIL-DTL-38999, Series III, Tri-Start Connector
72 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
III
SJT
38999
I
II
Access
Aquacon
Series III
A
TV Breakaway Fail-Safe Lanyard Release Plug
Military (D38999/29 & D38999/30)
Lanyard
Length
(in.) ± .236
Lanyard
Length
(mm) ± 6.0
Lanyard
Length
Code
For Part
Number
4.016 102 A
4.528 115 B
5.000 127 C
5.512 140 D
6.024 153 E
6.535 166 F
7.008 178 G
7.520 191 H
7.992 203 I
8.503 216 J
9.016 229 K
9.528 242 L
10.000 254 M
10.512 267 N
11.024 280 P
11.535 293 R
12.008 305 S
12.520 318 T
13.031 331 U
14.016 356 V
15.000 381 W
16.024 407 X
17.008 432 Y
18.031 458 Z
6. MILITARY LANYARD
LENGTH CODE For alternate positions of connector (to prevent
cross-mating) (N indicates normal).
7. MILITARY ALTERNATE KEYING POSITION
Table II
PLUG
(FRONT FACE SHOWN)
RECEPTACLE
(FRONT FACE SHOWN)
MAIN
KEYWAY
AP
BSC
BP
BSC
DP
BSC
CP
BSC
˚
˚
˚
˚
DR
BSC
˚
CR
BSC
˚
BR
BSC
˚
AR
BSC
˚
MAIN
KEYWAY
Shell
Size
Key & Keyway
Arrangement
Identification
Letter
AR° or
AP°
BSC
BR°
or
BP°
BSC
CR°
or
CP°
BSC
DR°
or
DP°
BSC
7,
7H
N* 120 240
NA NA
A132 248
B80 230
C140 275
D155 234
E131 197
9
N* 105 140 215 265
A102 132 248 320
B80 118 230 312
C35 140 205 275
D64 155 234 304
E91 131 197 240
11,
13,
and
15
N* 95 141 208 236
A113 156 182 292
B90 145 195 252
C53 156 220 255
D119 146 176 298
E51 141 184 242
17
and
19
N* 80 142 196 293
A135 170 200 310
B49 169 200 244
C66 140 200 257
D62 145 180 280
E79 153 197 272
21,
23,
and
25
N* 80 142 196 293
A135 170 200 310
B49 169 200 244
C66 140 200 257
D62 145 180 280
E79 153 197 272
25L,
33,
and
37
N* 80 142 188 293
A135 170 188 310
B49 169 188 244
C66 140 188 257
D62 145 188 280
E79 153 188 272
73
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
III
SJT
I
II
Access
Aquacon
Series III
A
Ordering procedure for example part number 88-556529-EP is shown below:
1. 2. 3. 4. 5. 6.
Service
Class
Connector Type
Identification
Shell Size &
Insert Arrg. Code
Required
Field
Lanyard
Length Code
Contact Type/Alternate
Keying Position
88 -5565 29 0 E P
HOW TO ORDER - COMMERCIAL
These are standard nishes. Consult Amphenol Aerospace for other variations.
3. SELECT A COMMERCIAL SHELL SIZE &
INSERT ARRANGEMENT CODE
MIL-DTL-38999, see insert availability chart on page 71.
P designates pin, S designates socket for normal positioning of
contacts. When an alternate position of the connector is required
to prevent cross-mating, a different letter (other than P or S) is
used. See alternate positioning on page 72, then convert to
Amphenol Commercial coding by the following chart.
6. SELECT A CONTACT TYPE/ALTERNATE
KEYING POSITION
Pin Contacts Socket Contacts
MS Letter Amphenol letter MS Letter Amphenol Letter
PN P (normal) SN S (normal)
PA GSA H
PB ISB J
PC KSC L
PD MSD N
PE RSE T
5. SELECT A LANYARD
LENGTH CODE
1. SERVICE CLASS
88
Designates corrosion resistant olive drab cadmium plate over
nickel, 500 hour extended salt spray, EMI –50dB @ 10 GHz speci-
cation min., 175°C
91
Designates electroless nickel plated aluminum, optimum EMI
shielding effectiveness –65dB @ 10 GHz specication min., 48
hour salt spray, 200°C
2. CONNECTOR TYPE IDENTIFICATION
-5565 Designates MIL-DTL-38999, Series III Tri-Start
Lanyard Release Plug
4. REQUIRED FIELD
0THE REQUIRED FIELD IS ALWAYS A 0
TV Breakaway Fail-Safe Lanyard Release Plug
Commercial (88-5565 & 91-5565)
Lanyard
Length
(in.) ± .236
Lanyard
Length
(mm) ± 6.0
Lanyard
Length
Code
For Part
Number
4.016 102 A
4.528 115 B
5.000 127 C
5.512 140 D
6.024 153 E
6.535 166 F
7.008 178 G
7.520 191 H
7.992 203 I
8.503 216 J
9.016 229 K
9.528 242 L
10.000 254 M
10.512 267 N
11.024 280 P
11.535 293 R
12.008 305 S
12.520 318 T
13.031 331 U
14.016 356 V
15.000 381 W
16.024 407 X
17.008 432 Y
18.031 458 Z
74 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
III
SJT
38999
I
II
Access
Aquacon
Series III
A
D
.374 MAX
9.50 MAX
OUTER SLEEVE MOVEMENT
DURING UNMATING THREAD RELEASE
LANYARD
PULLED TAUT
AGAINST A
.500 ±.031
12.70 ±.79
DIA MANDREL
V THREAD
METRIC
1.781 MAX
45.24 MAX
2.375 MAX
60.33 MAX
BLUE BAND
B
.359 MAX
9.12 MAX
LANYARD LENGTH
(See Lanyard Length Table)
Blue band indicates rear release contact retention system
Millimeters
Inches
Fail-Safe Lanyard Release Plug-Crimp, Metal
Military (D38999/29 & D38999/30), Commercial (88-5565 & 91-5565)
Shell Size MS Shell Size Code B Max
D Max
Accessory Dia.
11 B 1.846 1.109
13 C 1.972 1.250
15 D 2.079 1.375
17 E 2.205 1.500
19 F 2.301 1.625
21 G 2.472 1.750
23 H 2.594 1.875
25 J 2.705 2.000
Shell Size
MS Shell Size
Code B Max
D Max
Accessory Dia. V Thread Metric
11 B 46.89 28.17 M15X1.0-6g
13 C 50.09 31.75 M18X1.0-6g
15 D 52.81 34.93 M22X1.0-6g
17 E 56.01 38.10 M25X1.0-6g
19 F 58.45 41.28 M28X1.0-6g
21 G 62.79 44.45 M31X1.0-6g
23 H 65.89 47.63 M34X1.0-6g
25 J 68.71 50.08 M37X1.0-6g
METAL
PART NUMBER BUILDER Page 71-73
ONLINE CONFIGURATOR www.amphenol-aerospace.com
STAINLESS STEEL
88-5565
91-5565
MILITARY
D38999/29 Pin
D38999/30 Socket
Commercial
75
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
III
SJT
I
II
Access
Aquacon
Series III
A
HOW TO ORDER - BY MILITARY PART NUMBER FAIL-SAFE D38999/31
Ordering procedure for example part number D38999/31WE20PN1 is shown below:
1. 2. 3. 4. 5. 6. 7. 8.
DOD Number
Prefix
Spec Sheet
Number
Service
Class
Lanyard Length
Code
Insert
Arrangement
Contact Style Alternate Keying
Position
Type
Number
D38999/ 31 W E 20 P N 1
4. LANYARD LENGTH CODE
Lanyard
Length
(in.) ±.236
Lanyard
Length
(mm.)
± 6.0
Lanyard Length Code for
Part Number
6.024 153.0 E
6.535 166.0 F
7.008 178.0 G
7.520 191.0 H
7.992 203.0 I
8.504 216.0 J
9.016 229.0 K
9.528 242.0 L
TV Breakaway Fail-Safe Lanyard Release
Military (D38999/31) Type 1 & 2 for MIL-STD-1760
3. SERVICE CLASS
F
Electroless nickel plated aluminum,
optimum EMI shielding effectiveness –65dB @ 10 GHz
specication min., 48 hour salt spray, 200°C
W
Corrosion resistant olive drab
cadmium plate aluminum, 500 hour extended salt spray,
EMI –50dB @ 10 GHz specication min., 175°C
1. DOD NUMBER PREFIX
D38999/ MIL-DTL-38999,
Series III Tri-Start Connectors
2. SPECIFICATION SHEET NUMBER
31 Designates Lanyard Release Plug for
MIL-STD-1760 with pin contacts
6. CONTACT STYLE-P & A ARE VALID OPTIONS
PReplaces the “no designation” option in the PIN on revision C
and earlier revision of the Mil-Spec.
ADesignates supplied less contacts.
7. ALTERNATE KEYING POSITION
NIs required for normal position.
8. TYPE NUMBER
TYPE 1, 2 OR 6. SEE DRAWINGS ON PAGE 76.
For accessories for lanyard release plugs see Accessories section.
Applications- Lanyard Release Plug
5. INSERT ARRANGEMENT
11 25-11
20 25-20
TYPE 6
88-555875/76
91-555875/76
TYPE 2
88-558518/19
91-558518/19
TYPE 1-Longer Shell
T3W-16B25-XXXX
MILITARY
D38999/31
76 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
III
SJT
38999
I
II
Access
Aquacon
Series III
A
2.008 MAX
51.00 MAX
BLUE
BAND
1.687 MAX
42.85 MAX
2.030 MAX
51.56 MAX
**
.100 MAX
2.54 MAX
OUTER SLEEVE MOVEMENT
DURING UNMATING
THREAD RELEASE
2.000 MAX
50.80 MAX
ACCESS.
DIA
LANYARD LENGTH
(See Lanyard Length Table)
METRIC
THREAD
M37X
1.0-6g0.100R
**
2.000 MAX
50.80 MAX
ACCESS.
DIA
.374 MAX
9.50 MAX
OUTER SLEEVE MOVEMENT
DURING UNMATING
THREAD RELEASE
.359 MAX
9.12 MAX
2.705 MAX
68.71 MAX
BLUE
BAND
1.781 MAX
45.24 MAX
2.375 MAX
60.33 MAX
LANYARD LENGTH
(See Lanyard Length Table)
METRIC
THREAD
M37X
1.0-6g
0.100R
.359 MAX
9.12 MAX
TYPE 6 TYPE 2
Blue band indicates rear release
contact retention system
** Lanyard pulled taut against a
.500 ± .13 dia. Mandrel
All dimensions for reference only
PIN CONTACTS ONLY, SHELL SIZE 25 ONLY
BLUE
BAND
2.000 MAX
50.80 MAX
ACCESS.
DIA
2.008 MAX
51.00 MAX
.359 MAX
9.12 MAX
METRIC
THREAD
M37X
1.0-6g0.100R
.280 MIN
7.11 MIN
FULL
THREAD
LANYARD LENGTH
(See Lanyard Length Table)
2.499 MAX
63.47 MAX
TYPE 1
(LONGER SHELL)
AB
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
1
2
3
4
5
6
7
A
B
C
D
E
F
G
HJ
KL
INSERT AVAILABILITY
FAIL SAFE D38999/31
FOR MIL-STD-1760
25-20
PRIMARY INTERFACE
SIGNAL SET
Contact
Legend
8 (twinax) 10 (power) 12 (coax) 16 20
25-11
AUXILIARY POWER
SIGNAL SET
TV Breakaway Fail-Safe Lanyard Release
Military (D38999/31) for MIL-STD-1760 Crimp, Metal
TRI-START LANYARD SEPARATION FORCES
Shell
Size
Straight Plug
(lbs. max.)
15 Degree Pull (lbs. max.)
25 90 100
PIN CONTACT DATA FOR MIL-STD-1760
Insert Arrangement
Service
Rating
Total
Contacts
Contact
20 16 12 (Coax) 8 (Twinax)
25-20 N 30 10 13 4 3
CONTACTS FOR 25-20 PATTERN
Shell
Size
Arrg.
Number
Number of
Contacts
Size
Contacts
Service
Rating
Contact
Location
Standard Contacts
Pin Socket
25 -20
3 8 Twinax A, H, K M39029/90-529 M39029/91-530
4 12 Coax 2,3 M39029/28-211 M39029/75-416
W, 5 M39029/102-558 M39029/103-559
13 16 N
C, D, E, F,
J, M, N,
P, R, T, U,
Y, Z
M39029/58-364 M39029/56-352
10 20 N
B, G, L, S,
V, X, 1, 4,
6, 7
M39029/58-363 M39029/56-351
Insert
Arrangement
Service
Rating
Total
Contacts
Contact Size
20 10 (power)
25-11 N 11 2 9
PART NUMBER BUILDER
Page 75
TYPE 6
88-555875/76
91-555875/76
TYPE 2
88-558518/19
91-558518/19
TYPE 1
T3W-16B25-XXXX
MILITARY
D38999/31
77
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
III
SJT
I
II
Access
Aquacon
Series III
A
Amphenol offers a commercial version of D38999/31 series III, type 6 connectors. Built from the
same time-tested and quality components used in its Mil-Spec counterpart, Amphenol’s
commercial variant is designed to accept a wider variety of insert arrangements the Mil-Spec
does not include. Available in shell size 25, these fail-safe connectors adopt an incredible
amount of versatility without sacricing performance or durability. Consult Amphenol Aerospace
for more information.
.280 MIN FULL THD.
.359 MAX
.218 ±.017
.066 + .010
- .003
PIN INSERT TOWER
.014 + .010
- .003
PIN INSERT TOWER
.591 +.003
-.000
2.030 MAX
.047
Ø2.008 MAX
MASTER KEY
BLUE BAND
LANYARD LENGTH CODE
.490 MIN
.583 + .005
- .001
SOCKET INSERT
Ø2.000 MAX
FEATURES AND BENEFITS
More versatile than the mil-spec
25 lanyards lengths
Available in all size 25 arrangements
Low force separation capabilities
Compatible with all mil-spec backshells
and accessories
Mates to existing D38999 receptacles
.280 MIN FULL THD.
.359 MAX
.218 ±.017
.066 + .010
- .003
PIN INSERT TOWER
.014 + .010
- .003
PIN INSERT TOWER
.591 +.003
-.000
2.030 MAX
.047
Ø2.008 MAX
MASTER KEY
BLUE BAND
LANYARD LENGTH CODE
.490 MIN
.583 + .005
- .001
SOCKET INSERT
Ø2.000 MAX
TV Breakaway Fail-Safe Lanyard Release
Commercial version of D38999/31, Type 6
QUICK-DISCONNECT WITH AN AXIAL PULL OF LANYARD
8 (twinax) 10 (power) 12 (coax) 16 20
78 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
III
SJT
38999
I
II
Access
Aquacon
Series III
A
HOW TO ORDER
INSERT ARRANGEMENTS
PDS-250-1
1. 2. 3. 4. 5.
Service Class Shell
Style
Insert Arrg. Alternate Keying
Position (End A)
Lanyard Length Code
88 725010- 04 P K
2. SHELL STYLE
725010- D38999/31 Type 6
725014- Extended
Backskirt
725041- Integrated
Banding Platform
1. FINISH*
88- Olive Drab Cadmium
91- Electroless Nickel
3. INSERT ARRANGEMENT
04 25-4
07 25-7
11 25-11
17 25-17
20 25-20
24 25-24
26 25-26
29 25-29
35 25-35
37 25-37
41 25-41
43 25-43
46 25-46
61 25-61
62 25-62
90 25-90
F4 25-F4
187 25-187
4. KEYING
Key
Position Pin Socket
NP S
AG H
BI J
CK L
DM N
ER T
5. LANYARD LENGTH CODE
Lanyard
Length
(in.) ± .236
Lanyard
Length
(mm) ± 6.0
Lanyard
Length
Code For
Part
Number
4.016 102 A
4.528 115 B
5.000 127 C
5.512 140 D
6.024 153 E
6.535 166 F
7.008 178 G
7.520 191 H
7.992 203 I
8.503 216 J
9.016 229 K
9.528 242 L
10.000 254 M
10.512 267 N
11.024 280 P
11.535 293 R
12.008 305 S
12.520 318 T
13.031 331 U
14.016 356 V
15.000 381 W
16.024 407 X
17.008 432 Y
18.031 458 Z
A
B
C
D
E
F
G
HJ
KL
AB
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
a
bcd
e
f
g
h
k
m
n
p
qrs
t
u
v
w
AB
C
D
E
FGH
J
K
L
M
NP
R
ST
UV
AB
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
1
2
3
4
5
6
7
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
YZ
a
Series III TV 25-17 25-19 25-20*** 25-24
Service Rating M I N I
Number of Contacts 36 6 19 10 13 3 4 12 12
Contact Size 22D 8 Twinax 12 20 16 8 Twinax 12 Coax 16 12
ABC
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Za
bc
d
e
f
g
h
k
m
n
p
q
r
t
u
vw
x
y
z
sJJ
KK
LL
AA
BBCC
DD
EE
FF
GG
HH
1
6
7
15
16
18
19
21
22
24
26
28
29
32
33
41
42
46
53
59
60
64
67
68
72
74
76
78
79
81
82
84
85
93
94
99
25 75
A
B
C
D
E
F
G
H
Series III TV 25-04 25-07 25-08 25-11***
Service Rating I M Twinax N
Number of Contacts 48 8 97 2 8 2 9
Contact Size 20 16 22D 8 Twinax 8 Twinax 20 10
Shell Size &
Insert Arrg. for:
Shell Size &
Insert Arrg. for:
TV Breakaway Fail-Safe Lanyard Release Connector
Commercial (88-725010, 88-725014, 88-725041) Version of D38999/31 Type 6
* Contact Amphenol for
availability of other nishes.
79
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
III
SJT
I
II
Access
Aquacon
Series III
A
SPECIALS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18 19 20
21
22
23
24
25
A
B
C
D
E
F
G
H
J
K
L
M
N
P
RST
U
V
W
X
Y
Z
a
bc
d
e
f
1
4
7
8
14
15
24
25
35
36
47
48
58
59
70
71
81
82
93
94
104
105
114
115
121
125
128
Series III TV 25-26 25-29 25-35 25-37
Service Rating I I M I
Number of Contacts 16 5 4 29 128 37
Contact Size 20 12 8 Coax 16 22D 16
AB
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
f
g
h
k
m
n
p
q
r
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
a
b
c
d
e
f
g
h
k
m
n
p
q
r
s
t
u
v
w
x
y
z
AA
Series III TV 25-41 25-43 25-46 25-61
Service Rating N/Inst. I I I
Number of Contacts 22 3 11 2 3 23 20 40 4 2 61
Contact Size 22D 20 16 12 Coax 8 Twinax 20 16 20 16 8 Coax 20
AB
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
XYZ
a
b
c
d
e
f
g
h
k
m
np
q
r
s
tu
v
w
x
BP
CN
DM
EL
F
G
H
J
K
A
RY
X S
W
Z
T
UV
de
npqg
ac
b
j
k h
m
st
r
i
Series III TV 25-62 25-90 25-F4 25-187 HD
Service Rating I I Size 22D=M, Balance =I N
Number of Contacts 8 4 40 4 2 49 13 4 187
Contact Size 16 8 20 16 8 Twinax 22D 16 12 23
Ground Plane Only
A
B
C
D
E
F
G
H
J
KL
M
N
a
P
R
S
T
U
V
W
X
Y
Z
b
c
d
e
fg
h
AA
k
q
m
n
p
r
s
tu
v
w
x
y
z
1
17
18
19
49
35
20
21
22
23
16
15
48
59
60 66 64
65
37 50 51 41 42 43
31
30
38 39 40 29
27
26
25
24
54636261
36
325352
44
55
56
57
46
34
14
13
45
12
11
10
9
8
7
6
5
4
3
2
33
28
47
58
D A
CB
18
45
72
63
AB
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
V
W
X
Y
Z
ab
c
d
e
f
g
h
i
j
k
m
n
p
q
r
s
t
uv
w
x
y
z
BB
CC
DD
EE
FF
GG HH
JJ
KK
LL
MM
NN
AA
PP
1
411
21
20
12
32
33 45
46 59
60 72
73 86
87 101
102
142
116
155
129
167
143
115
128
177
176
185
184
187
156
168
3
A
B
C
D
E
F
G
H
A
B
C
A
B
CD
E
F
G
Series III TV 25-92 25-97 25-16 25L-3 25L-7
Service Rating M M M II II
Number of Contacts 92 9 26 3 13 6 2 1 2 7
Contact Size 22D 16 22D 16 12 20 4 8 4 8
98
100
101
90
79
67
57
46
24
36
13
5
1
4
12 23 35 45 56 66 78 89 97
2
3
99
MA
LB
N
KC
JD
HE
GF
YW
X
aU
ZV
rm
pnks
b
c
deP
R
S
T
j
w
h
g
f
uv
t
Shell Size &
Insert Arrg. for:
Shell Size &
Insert Arrg. for:
Shell Size &
Insert Arrg. for:
Shell Size &
Insert Arrg. for:
Insert Arrangements
Commercial (88-725010 & 88-725014) Version of D38999/31 Type 6
80 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
III
SJT
38999
I
II
Access
Aquacon
Series III
A
88-725014 EXTENDED BACKSKIRT
88-725041 INTEGRATED BANDING PLATFORM
.787
REF
1.747
REF
.280 MINIMUM
FULL THREAD
2.534 REF
R
2.186
MAX
Ø1.400
REF
2 PLACES
Ø1.456
REF
2 PLACES
R
.216 REF
.255 REF
.379 REF
.419 REF
TV Breakaway Fail-Safe Lanyard Release Connector
Commercial (88-725014 & 88-725041) Version of D38999/31 Type 6
81
Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com
38999
III
SJT
I
II
Access
Aquacon
Series III
A
D38999 Type Hybrid Breakaway – Series III
Lower Profile Lanyard Release Plug, Crimp
New Hybrid Lanyard Breakaway Fail-Safe connector with a composite
thermoplastic outer operating sleeve for greater durability.
This new hybrid breakaway is the breakaway of choice for the Navy F-18
Program. Amphenol’s hybrid lanyard design offers greater durability over
D38999 aluminum and composite designs because of its ability to handle
abuse taken after weapons release.
Other advantages include:
Lower prole compared to full metal breakaway
Fail-Safe connectors
Less weight
This Hybrid Breakaway meets the applicable requirements of
MIL-DTL-38999/31 including random & sine vibration, ice resistance, uid
immersion and hydrolytic stability tests.
(Test reports are available upon request).
Currently the hybrid breakaway is available in shell sizes 25 and 17. It uses
standard inserts available for breakaway plugs sizes 25 and 17, and is also
available with inserts 25-20 and 25-11 for MIL-STD-1760. These hybrid
connectors will accommodate the
standard backshells for breakaway
connectors shown on Accessories
section or the backshell section.
Consult Amphenol Aerospace for
ordering of the new hybrid
breakaway connectors.
New Hybrid Lanyard Release Plugs
(Metal inside shells and Composite,
lower profile outer sleeves)
STORES MANAGEMENT TYPE II, RAIL LAUNCH
Plugs and Receptacles that meet MIL-STD-1760
Amphenol provides a Breakaway Rail Launch connector that is designed for use
on aircraft that carry rail launch missiles such as AMRAAM.
These connectors are designed for blindmating of stores on rail launch applica-
tions. They consist of a buffer plug and a missile receptacle that meet the
specications of MIL-STD-1760 Stores Management.
Other features and benets include:
Designed to MIL-C-83538 specications
Bayonet and push pull coupling
Use standard MIL-DTL-38999 crimp termination with power, coax and twinax
contacts also available
Buffer provides ame barrier
Buffers are replaceable
Consult Amphenol Aerospace for more information and ordering. Stores Management Type II
Rail Launch Connectors
CONDITION/TEST DESCRIPTION REFERENCE
Durability 400 complete mating/unmating cycles MIL-DTL-38999/31D
High Impact Shock Nine hammer blows from 1,3 and 5 feet,
three each in three axes on mounting panel.
MIL-S- 901D
Vibration 10 to 2000Hz in three perpendicular axes,
4 hours in each axis for a total of 12 hours
with no fracturing or breaking of parts.
MIL-STD-202F, Method 204
Ice Resistance Pull tested after conditioned with Ice water
at -18C for 35 minutes.
MIL-DTL-38999/31D
Fail Safe
Disengagement
Rotationaly unmated 180° from full mate
position and pull tested in both a straight
direction and at 15°.
MIL-DTL-38999/31D
High Speed Pull Separa-
tion
100 cycles at 30 feet per second. MIL-DTL-38999/31D
METAL SHELLS WITH COMPOSITE OPERATING SLEEVE