GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 105 at 30A, 120VAC Res. (N.O.)
(Max. 15ms)
Typical: 8ms
(Max. 10ms )
Typical: 3.5ms
Dielectric Strength
(at sea level for 1 min.)
2500Vrms contact to coil
1500Vrms between open contacts
Insulation Resistance 1000 megohms min. at 500 VDC, 20°C,
50% RH
Dropout Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
Storage
-55°C (-67°F) to 85°C (185°F)
-55°C (-67°F) to 105°C (221°F)
Vibration 0.062" DA at 10–55 Hz
Shock
10 g
Enclosure P.B.T. polyester
Terminals Tinned copper alloy, P.C. with quick-con
nect tabs, .250" wide, on top
Note: Allow suitable slack on leads when wiring,
do not subject the terminals to excessive force.
Max. Solder Temp. 270°C (518°F)
Max. Solder Time 5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight (Approx.) 35 grams
CONTACTS
Arrangement SPDT (1 Form C)
SPST (1 Form A and 1 Form B)
Ratings Resistive load:
Max. switched power: 600W or 10,000VA
Max. switched current: 40A (Form A), 15A (Form B)
Max. switched voltage: 30VDC or 277VAC
UL Rating: See chart for UL contact ratings. AZ2100
Series meets UL 508 Group A spacing and UL 873
refrigeration and safety control requirements. AZ2101
Series meets UL 508 Group B spacing requirements.
VDE Rating:
AZ2100-1A: 25A for class F/20A for class B type at
250VAC, 10k cycles, resistive
AZ2100-1C: 20A at 250VAC, 10k cycles, resistive
Material Silver cadmium oxide
Resistance < 50 milliohms initially
(at 1A, 24V voltage drop method)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Unsealed relays should not be dip cleaned.
4. Other coil resistances and sensitivities available upon request.
5. Specifications subject to change without notice.
COIL
Power
At Pickup Voltage 500 mW
(typical)
Max. Continuous 2.2 W at 20°C (68°F) ambient
Dissipation 1.8 W at 40°C (104°F) ambient
Temperature Rise 38°C (68°F) at nominal coil voltage
Temperature Max. 130°C (266°F) Class B
Max. 155°C (311°F) Class F
AZ2100
2/05/16
40A MINIATURE
POWER RELAY
FEATURES
•Versatility of both PC and “Trace-Saver” quick-connect ter-
minals on contacts
•40 Amp switching capability
•1 Form A, B and C contacts available
•
DC coils to 110VDC
•Life expectancy to 10 million operations
•Class B insulation for high temperature applications
•Class F (155°C) version available
•Available with an epoxy seal for automatic wave
soldering and immersion cleaning
•Proof Tracking Index (PTI/CTI) 175
•UL, CUR file E44211 including versions meeting UL 508
and UL 873 spacing and contact rating requirements; VDE
40023154 (some models)